DMA Engine development
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@oss.nxp.com>
To: Koichiro Den <den@valinux.co.jp>
Cc: "Manivannan Sadhasivam" <mani@kernel.org>,
	"Vinod Koul" <vkoul@kernel.org>, "Frank Li" <Frank.Li@kernel.org>,
	"Gustavo Pimentel" <Gustavo.Pimentel@synopsys.com>,
	"Kees Cook" <kees@kernel.org>,
	"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
	"Kishon Vijay Abraham I" <kishon@kernel.org>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Christoph Hellwig" <hch@lst.de>,
	"Serge Semin" <fancer.lancer@gmail.com>,
	"Cai Huoqing" <cai.huoqing@linux.dev>,
	"Niklas Cassel" <cassel@kernel.org>,
	"Devendra K Verma" <devendra.verma@amd.com>,
	dmaengine@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 04/17] dmaengine: dw-edma: Clean up vchan descriptors on termination
Date: Mon, 15 Jun 2026 13:43:58 -0500	[thread overview]
Message-ID: <ajBH7rXlNsdM1Tp2@SMW015318> (raw)
In-Reply-To: <20260615154111.2174161-5-den@valinux.co.jp>

On Tue, Jun 16, 2026 at 12:40:58AM +0900, Koichiro Den wrote:
> dw-edma resets channel state from terminate_all() paths, but pending
> virt-dma descriptors can remain on the submitted and issued lists. A
> later issue_pending() may then restart work that the client already
> terminated, possibly into buffers that were already reused. Descriptors
> that are never restarted leak instead.
>
> Move issued and submitted descriptors to the terminated list whenever a
> termination request completes. Also release virt-dma resources from
> free_chan_resources().
>
> If termination was deferred because the channel was still running, wait
> until the STOP path deconfigures the channel before synchronizing or
> freeing virt-dma resources. Otherwise dmaengine_terminate_sync() can
> return before the deferred STOP cleanup has moved issued descriptors to
> the terminated list and before the channel is known to have stopped.
>
> The old free_chan_resources() loop usually broke as soon as
> terminate_all() returned zero, so it did not effectively spin until the
> timeout. This wait can now last until the existing timeout, so use
> cond_resched() instead of busy-polling with cpu_relax(), and warn if the
> timeout expires.
>
> Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
> Signed-off-by: Koichiro Den <den@valinux.co.jp>
> ---
>  drivers/dma/dw-edma/dw-edma-core.c | 78 ++++++++++++++++++++++++------
>  1 file changed, 64 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c
> index bedaee6d30ab..2777dc0b2aed 100644
> --- a/drivers/dma/dw-edma/dw-edma-core.c
> +++ b/drivers/dma/dw-edma/dw-edma-core.c
> @@ -15,6 +15,7 @@
>  #include <linux/irq.h>
>  #include <linux/dma/edma.h>
>  #include <linux/dma-mapping.h>
> +#include <linux/sched.h>
>  #include <linux/string_choices.h>
>
>  #include "dw-edma-core.h"
> @@ -113,6 +114,28 @@ static void dw_edma_terminate_vdesc(struct virt_dma_desc *vd)
>  	vchan_terminate_vdesc(vd);
>  }
>
> +static void dw_edma_terminate_vdesc_list(struct list_head *head)
> +{
> +	struct virt_dma_desc *vd, *_vd;
> +
> +	list_for_each_entry_safe(vd, _vd, head, node)
> +		dw_edma_terminate_vdesc(vd);
> +}
> +
> +/* Must be called with vc.lock held. */
> +static void dw_edma_terminate_all_descs(struct dw_edma_chan *chan)
> +{
> +	/*
> +	 * This order must not be reversed. Cookies are assigned when
> +	 * descriptors are submitted, so desc_issued contains older cookies
> +	 * than desc_submitted. Completing desc_submitted first could move
> +	 * chan->vc.chan.completed_cookie backwards when desc_issued is
> +	 * terminated afterwards.
> +	 */
> +	dw_edma_terminate_vdesc_list(&chan->vc.desc_issued);
> +	dw_edma_terminate_vdesc_list(&chan->vc.desc_submitted);
> +}
> +

Is it possible move every thing to temp termniate queue by hold lock, then
call dw_edma_terminate_vdesc(vd) outside lock.

Frank
>  static void dw_edma_device_caps(struct dma_chan *dchan,
>  				struct dma_slave_caps *caps)
>  {
> @@ -190,20 +213,25 @@ static int dw_edma_device_resume(struct dma_chan *dchan)
>  static int dw_edma_device_terminate_all(struct dma_chan *dchan)
>  {
>  	struct dw_edma_chan *chan = dchan2dw_edma_chan(dchan);
> +	unsigned long flags;
>  	int err = 0;
>
> +	spin_lock_irqsave(&chan->vc.lock, flags);
>  	if (!chan->configured) {
> -		/* Do nothing */
> +		dw_edma_terminate_all_descs(chan);
>  	} else if (chan->status == EDMA_ST_PAUSE) {
> +		dw_edma_terminate_all_descs(chan);
>  		chan->status = EDMA_ST_IDLE;
>  		chan->configured = false;
>  	} else if (chan->status == EDMA_ST_IDLE) {
> +		dw_edma_terminate_all_descs(chan);
>  		chan->configured = false;
>  	} else if (dw_edma_core_ch_status(chan) == DMA_COMPLETE) {
>  		/*
>  		 * The channel is in a false BUSY state, probably didn't
>  		 * receive or lost an interrupt
>  		 */
> +		dw_edma_terminate_all_descs(chan);
>  		chan->status = EDMA_ST_IDLE;
>  		chan->configured = false;
>  	} else if (chan->request > EDMA_REQ_PAUSE) {
> @@ -211,6 +239,7 @@ static int dw_edma_device_terminate_all(struct dma_chan *dchan)
>  	} else {
>  		chan->request = EDMA_REQ_STOP;
>  	}
> +	spin_unlock_irqrestore(&chan->vc.lock, flags);
>
>  	return err;
>  }
> @@ -544,7 +573,7 @@ static void dw_edma_done_interrupt(struct dw_edma_chan *chan)
>  			break;
>
>  		case EDMA_REQ_STOP:
> -			dw_edma_terminate_vdesc(vd);
> +			dw_edma_terminate_all_descs(chan);
>  			chan->request = EDMA_REQ_NONE;
>  			chan->status = EDMA_ST_IDLE;
>  			break;
> @@ -616,28 +645,49 @@ static int dw_edma_alloc_chan_resources(struct dma_chan *dchan)
>  	return 0;
>  }
>
> +static void dw_edma_wait_termination(struct dma_chan *dchan)
> +{
> +	struct dw_edma_chan *chan = dchan2dw_edma_chan(dchan);
> +	unsigned long timeout = jiffies + msecs_to_jiffies(5000);
> +	unsigned long flags;
> +	bool configured = true;
> +
> +	/*
> +	 * dw_edma_device_terminate_all() may defer cleanup to a later interrupt
> +	 * while the channel is still running. Retry until the channel is
> +	 * deconfigured, which marks that termination completed.
> +	 */
> +	while (time_before(jiffies, timeout)) {
> +		dw_edma_device_terminate_all(dchan);
> +
> +		spin_lock_irqsave(&chan->vc.lock, flags);
> +		configured = chan->configured;
> +		spin_unlock_irqrestore(&chan->vc.lock, flags);
> +		if (!configured)
> +			return;
> +
> +		cond_resched();
> +	}
> +
> +	dev_warn(chan->dw->chip->dev,
> +		 "timeout waiting for channel termination\n");
> +}
> +
>  static void dw_edma_device_synchronize(struct dma_chan *dchan)
>  {
>  	struct dw_edma_chan *chan = dchan2dw_edma_chan(dchan);
>
> +	dw_edma_wait_termination(dchan);
>  	vchan_synchronize(&chan->vc);
>  }
>
>  static void dw_edma_free_chan_resources(struct dma_chan *dchan)
>  {
> -	unsigned long timeout = jiffies + msecs_to_jiffies(5000);
> -	int ret;
> -
> -	while (time_before(jiffies, timeout)) {
> -		ret = dw_edma_device_terminate_all(dchan);
> -		if (!ret)
> -			break;
> -
> -		if (time_after_eq(jiffies, timeout))
> -			return;
> +	struct dw_edma_chan *chan = dchan2dw_edma_chan(dchan);
>
> -		cpu_relax();
> -	}
> +	dw_edma_wait_termination(dchan);
> +	vchan_synchronize(&chan->vc);
> +	vchan_free_chan_resources(&chan->vc);
>  }
>
>  static int dw_edma_channel_setup(struct dw_edma *dw, u32 wr_alloc, u32 rd_alloc)
> --
> 2.51.0
>

  reply	other threads:[~2026-06-15 18:44 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-15 15:40 [PATCH 00/17] dmaengine: dw-edma: Support dynamic LL appends Koichiro Den
2026-06-15 15:40 ` [PATCH 01/17] dmaengine: dw-edma: Fix residue burst index in tx_status() Koichiro Den
2026-06-15 18:29   ` Frank Li
2026-06-15 15:40 ` [PATCH 02/17] dmaengine: dw-edma: Fix HDMA channel status register access Koichiro Den
2026-06-15 18:31   ` Frank Li
2026-06-15 15:40 ` [PATCH 03/17] dmaengine: dw-edma: Terminate STOP requests without callbacks Koichiro Den
2026-06-15 18:37   ` Frank Li
2026-06-15 15:40 ` [PATCH 04/17] dmaengine: dw-edma: Clean up vchan descriptors on termination Koichiro Den
2026-06-15 18:43   ` Frank Li [this message]
2026-06-15 15:40 ` [PATCH 05/17] dmaengine: dw-edma: Serialize channel state checks Koichiro Den
2026-06-15 18:47   ` Frank Li
2026-06-15 15:41 ` [PATCH 06/17] dmaengine: dw-edma: Add dw_edma_core_ll_cur_idx() to get current LL entry index Koichiro Den
2026-06-15 15:41 ` [PATCH 07/17] dmaengine: dw-edma: Move dw_hdma_set_callback_result() up Koichiro Den
2026-06-15 15:41 ` [PATCH 08/17] dmaengine: dw-edma: Make DMA link list work as a circular buffer Koichiro Den
2026-06-15 15:41 ` [PATCH 09/17] dmaengine: dw-edma: Add LL interrupt placement policy Koichiro Den
2026-06-15 15:41 ` [PATCH 10/17] dmaengine: dw-edma: Reclaim issued descriptors from LL progress Koichiro Den
2026-06-15 15:41 ` [PATCH 11/17] dmaengine: dw-edma: Use HDMA watermarks as progress events Koichiro Den
2026-06-15 15:41 ` [PATCH 12/17] dmaengine: dw-edma: Clear LL data entries on reset Koichiro Den
2026-06-15 15:41 ` [PATCH 13/17] dmaengine: dw-edma: Dispatch DONE interrupts by channel request Koichiro Den
2026-06-15 15:41 ` [PATCH 14/17] dmaengine: dw-edma: Reset LL state after terminate and abort Koichiro Den
2026-06-15 15:41 ` [PATCH 15/17] dmaengine: dw-edma: Dynamically append requests while running Koichiro Den
2026-06-15 15:41 ` [PATCH 16/17] dmaengine: dw-edma: Recover stopped HDMA from tx_status Koichiro Den
2026-06-15 15:41 ` [PATCH 17/17] dmaengine: dw-edma: Add trace support Koichiro Den

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ajBH7rXlNsdM1Tp2@SMW015318 \
    --to=frank.li@oss.nxp.com \
    --cc=Frank.Li@kernel.org \
    --cc=Gustavo.Pimentel@synopsys.com \
    --cc=bhelgaas@google.com \
    --cc=cai.huoqing@linux.dev \
    --cc=cassel@kernel.org \
    --cc=den@valinux.co.jp \
    --cc=devendra.verma@amd.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=fancer.lancer@gmail.com \
    --cc=hch@lst.de \
    --cc=kees@kernel.org \
    --cc=kishon@kernel.org \
    --cc=kwilczynski@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mani@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox