Re: [PATCH v1 1/3] dmaengine: dw-edma: Make Xilinx Macros Dev Name Agnostic

[Frank Li <Frank.li@oss.nxp.com>]

On Wed, Jul 22, 2026 at 04:46:38PM +0530, Devendra K Verma wrote:
> Xilinx specific macros for MDB device can be reused for the
> Xilinx supported other similar IP such as CPM6.
> Renamed the Xilinx specific macros in a way that can be
> reused for Xilinx supported upcoming IP, CPM6.
> Naming is in accordance with the naming done for Synopsys macros.
>
> Signed-off-by: Devendra K Verma <devverma@amd.com>
> ---

I don't think it is necessary to remove MDB. You may mention somewhere
CMP6 compatible with MDB. It is quite common in driver.

The major concerns is that if a incompatible devices appear, such as CMP7,
which have special registers, need add _MDB_ back.

Frank

>  drivers/dma/dw-edma/dw-edma-pcie.c | 58 +++++++++++++++---------------
>  1 file changed, 29 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/dma/dw-edma/dw-edma-pcie.c b/drivers/dma/dw-edma/dw-edma-pcie.c
> index 791c46e8ae4c..ec5e057a0f11 100644
> --- a/drivers/dma/dw-edma/dw-edma-pcie.c
> +++ b/drivers/dma/dw-edma/dw-edma-pcie.c
> @@ -29,21 +29,21 @@
>  #define PCI_DEVICE_ID_XILINX_B054		0xb054
>  #define PCI_DEVICE_ID_XILINX_B00F		0xb00f
>
> -#define DW_PCIE_XILINX_MDB_VSEC_DMA_ID		0x6
> -#define DW_PCIE_XILINX_MDB_VSEC_ID		0x20
> -#define DW_PCIE_XILINX_MDB_VSEC_DMA_BAR		GENMASK(10, 8)
> -#define DW_PCIE_XILINX_MDB_VSEC_DMA_MAP		GENMASK(2, 0)
> -#define DW_PCIE_XILINX_MDB_VSEC_DMA_WR_CH	GENMASK(9, 0)
> -#define DW_PCIE_XILINX_MDB_VSEC_DMA_RD_CH	GENMASK(25, 16)
> -
> -#define DW_PCIE_XILINX_MDB_DEVMEM_OFF_REG_HIGH	0xc
> -#define DW_PCIE_XILINX_MDB_DEVMEM_OFF_REG_LOW	0x8
> -#define DW_PCIE_XILINX_MDB_INVALID_ADDR		(~0ULL)
> -
> -#define DW_PCIE_XILINX_MDB_LL_OFF_GAP		0x200000
> -#define DW_PCIE_XILINX_MDB_LL_SIZE		0x800
> -#define DW_PCIE_XILINX_MDB_DT_OFF_GAP		0x100000
> -#define DW_PCIE_XILINX_MDB_DT_SIZE		0x800
> +#define DW_PCIE_XILINX_VSEC_DMA_ID		0x6
> +#define DW_PCIE_XILINX_VSEC_ID			0x20
> +#define DW_PCIE_XILINX_VSEC_DMA_BAR		GENMASK(10, 8)
> +#define DW_PCIE_XILINX_VSEC_DMA_MAP		GENMASK(2, 0)
> +#define DW_PCIE_XILINX_VSEC_DMA_WR_CH		GENMASK(9, 0)
> +#define DW_PCIE_XILINX_VSEC_DMA_RD_CH		GENMASK(25, 16)
> +
> +#define DW_PCIE_XILINX_DEVMEM_OFF_REG_HIGH	0xc
> +#define DW_PCIE_XILINX_DEVMEM_OFF_REG_LOW	0x8
> +#define DW_PCIE_XILINX_INVALID_ADDR		(~0ULL)
> +
> +#define DW_PCIE_XILINX_LL_OFF_GAP		0x200000
> +#define DW_PCIE_XILINX_LL_SIZE			0x800
> +#define DW_PCIE_XILINX_DT_OFF_GAP		0x100000
> +#define DW_PCIE_XILINX_DT_SIZE			0x800
>
>  #define DW_BLOCK(a, b, c) \
>  	{ \
> @@ -258,10 +258,10 @@ static void dw_edma_pcie_get_xilinx_dma_data(struct pci_dev *pdev,
>  	u16 vsec;
>  	u64 off;
>
> -	pdata->devmem_phys_off = DW_PCIE_XILINX_MDB_INVALID_ADDR;
> +	pdata->devmem_phys_off = DW_PCIE_XILINX_INVALID_ADDR;
>
>  	vsec = pci_find_vsec_capability(pdev, PCI_VENDOR_ID_XILINX,
> -					DW_PCIE_XILINX_MDB_VSEC_DMA_ID);
> +					DW_PCIE_XILINX_VSEC_DMA_ID);
>  	if (!vsec)
>  		return;
>
> @@ -272,18 +272,18 @@ static void dw_edma_pcie_get_xilinx_dma_data(struct pci_dev *pdev,
>
>  	pci_dbg(pdev, "Detected Xilinx PCIe Vendor-Specific Extended Capability DMA\n");
>  	pci_read_config_dword(pdev, vsec + 0x8, &val);
> -	map = FIELD_GET(DW_PCIE_XILINX_MDB_VSEC_DMA_MAP, val);
> +	map = FIELD_GET(DW_PCIE_XILINX_VSEC_DMA_MAP, val);
>  	if (map != EDMA_MF_HDMA_NATIVE)
>  		return;
>
>  	pdata->mf = map;
> -	pdata->rg.bar = FIELD_GET(DW_PCIE_XILINX_MDB_VSEC_DMA_BAR, val);
> +	pdata->rg.bar = FIELD_GET(DW_PCIE_XILINX_VSEC_DMA_BAR, val);
>
>  	pci_read_config_dword(pdev, vsec + 0xc, &val);
>  	pdata->wr_ch_cnt = min(pdata->wr_ch_cnt,
> -			       FIELD_GET(DW_PCIE_XILINX_MDB_VSEC_DMA_WR_CH, val));
> +			       FIELD_GET(DW_PCIE_XILINX_VSEC_DMA_WR_CH, val));
>  	pdata->rd_ch_cnt = min(pdata->rd_ch_cnt,
> -			       FIELD_GET(DW_PCIE_XILINX_MDB_VSEC_DMA_RD_CH, val));
> +			       FIELD_GET(DW_PCIE_XILINX_VSEC_DMA_RD_CH, val));
>
>  	pci_read_config_dword(pdev, vsec + 0x14, &val);
>  	off = val;
> @@ -293,16 +293,16 @@ static void dw_edma_pcie_get_xilinx_dma_data(struct pci_dev *pdev,
>  	pdata->rg.off = off;
>
>  	vsec = pci_find_vsec_capability(pdev, PCI_VENDOR_ID_XILINX,
> -					DW_PCIE_XILINX_MDB_VSEC_ID);
> +					DW_PCIE_XILINX_VSEC_ID);
>  	if (!vsec)
>  		return;
>
>  	pci_read_config_dword(pdev,
> -			      vsec + DW_PCIE_XILINX_MDB_DEVMEM_OFF_REG_HIGH,
> +			      vsec + DW_PCIE_XILINX_DEVMEM_OFF_REG_HIGH,
>  			      &val);
>  	off = val;
>  	pci_read_config_dword(pdev,
> -			      vsec + DW_PCIE_XILINX_MDB_DEVMEM_OFF_REG_LOW,
> +			      vsec + DW_PCIE_XILINX_DEVMEM_OFF_REG_LOW,
>  			      &val);
>  	off <<= 32;
>  	off |= val;
> @@ -360,7 +360,7 @@ static int dw_edma_pcie_probe(struct pci_dev *pdev,
>  		 * address use the non-LL mode or simple mode supported by
>  		 * the HDMA IP.
>  		 */
> -		if (vsec_data->devmem_phys_off == DW_PCIE_XILINX_MDB_INVALID_ADDR)
> +		if (vsec_data->devmem_phys_off == DW_PCIE_XILINX_INVALID_ADDR)
>  			non_ll = true;
>
>  		/*
> @@ -370,10 +370,10 @@ static int dw_edma_pcie_probe(struct pci_dev *pdev,
>  		 */
>  		if (!non_ll)
>  			dw_edma_set_chan_region_offset(vsec_data, BAR_2, 0,
> -						       DW_PCIE_XILINX_MDB_LL_OFF_GAP,
> -						       DW_PCIE_XILINX_MDB_LL_SIZE,
> -						       DW_PCIE_XILINX_MDB_DT_OFF_GAP,
> -						       DW_PCIE_XILINX_MDB_DT_SIZE);
> +						       DW_PCIE_XILINX_LL_OFF_GAP,
> +						       DW_PCIE_XILINX_LL_SIZE,
> +						       DW_PCIE_XILINX_DT_OFF_GAP,
> +						       DW_PCIE_XILINX_DT_SIZE);
>  	}
>
>  	/* Mapping PCI BAR regions */
> --
> 2.43.0
>