DMA Engine development
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@oss.nxp.com>
To: "Nuno Sá" <noname.nuno@gmail.com>
Cc: nuno.sa@analog.com, dmaengine@vger.kernel.org,
	linux-iio@vger.kernel.org, Vinod Koul <vkoul@kernel.org>,
	Frank Li <Frank.Li@kernel.org>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Jonathan Cameron <jic23@kernel.org>,
	David Lechner <dlechner@baylibre.com>,
	Andy Shevchenko <andy@kernel.org>
Subject: Re: [PATCH 0/9] dmaengine: Support bus widths of 32 bytes and above
Date: Fri, 31 Jul 2026 10:51:21 -0500	[thread overview]
Message-ID: <amzEeR4A-py0E6Fj@SMW015318> (raw)
In-Reply-To: <amzASrOOjJjFun3M@nsa>

On Fri, Jul 31, 2026 at 04:34:16PM +0100, Nuno Sá wrote:
> On Thu, Jul 30, 2026 at 02:05:43PM -0500, Frank Li wrote:
> > On Thu, Jul 30, 2026 at 03:23:07PM +0100, Nuno Sá via B4 Relay wrote:
> > > [You don't often get email from devnull+nuno.sa.analog.com@kernel.org. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
> > >
> > > The DMA engine slave capabilities advertise the supported source and
> > > destination bus widths through src_addr_widths / dst_addr_widths. These
> > > are plain u32 bitmasks where a set bit's position equals the
> > > corresponding enum dma_slave_buswidth value, e.g.
> > > DMA_SLAVE_BUSWIDTH_4_BYTES sets bit 4.
> > >
> > > The consequence is that widths of 32 bytes and above cannot be
> > > represented at all: DMA_SLAVE_BUSWIDTH_32/64/128_BYTES would need bits
> > > 32, 64 and 128, which do not fit in a u32. Hardware with wider data
> > > paths is becoming common, so add a representation that can express these
> > > widths while still using enum dma_slave_buswidth.
> > >
> > > This series switches consumers and a small set of producers to bitmap
> > > based bus width capabilities. The legacy dma_device u32 fields are kept
> > > for now so the remaining DMA controller drivers can be converted
> > > incrementally. dma_get_slave_caps() folds legacy producer masks into the
> > > new bitmap representation returned to consumers.
> > >
> > > Once the remaining producers are converted, the legacy dma_device
> > > src/dst_addr_widths fields can be removed as a final cleanup.
> > >
> > > This issue was discussed before here:
> > >
> > > https://lore.kernel.org/dmaengine/abkoXXbaxaiqbBuX@vaman/
> > >
> > > ---
> > > Changes in v1:
> >
> > this should be v2, RFC is v1
>
> Ups! Sorry about that! But I guess now we keep this path? I mean, I
> should not bump to v3 next right?

Needn't bump now. wait for other persion's review.

Frank

>
> - Nuno Sá
>
> >
> > Frank
> > > - Drop RFC tag.
> > > - Rename the new capability representation and helpers from address
> > >   width terminology to bus width terminology.
> > > - Convert all current dma_get_slave_caps() consumers that used the
> > >   legacy src/dst_addr_widths fields.
> > > - Convert a small set of DMA controller producers and the stm32-dma3
> > >   per-channel capability callback.
> > > - Add helper documentation for the new public API.
> > > - Link to RFC: https://lore.kernel.org/dmaengine/20260616-dmaengine-support-wider-dma-masks-v1-0-da23a8dcb756@analog.com/
> > >
> > > ---
> > > Nuno Sá (9):
> > >       dmaengine: Support bus widths of 32 bytes and above
> > >       dmaengine: dma-axi-dmac: Use bus width capability helpers
> > >       dmaengine: dw-axi-dmac: Use bus width capability helpers
> > >       dmaengine: qcom: gpi: Use bus width capability helpers
> > >       dmaengine: stm32-dma3: Use bus width capability helpers
> > >       iio: buffer-dmaengine: Use dma_slave_caps bus width accessors
> > >       ALSA: pcm_dmaengine: Use dma_slave_caps bus width helpers
> > >       spi: dw: Use dma_slave_caps bus width helpers
> > >       dmaengine: Drop legacy bus width fields from dma_slave_caps
> > >
> > >  drivers/dma/dma-axi-dmac.c                         |  13 +-
> > >  drivers/dma/dmaengine.c                            |  20 +-
> > >  drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c     |  39 ++--
> > >  drivers/dma/qcom/gpi.c                             |  11 +-
> > >  drivers/dma/stm32/stm32-dma3.c                     |  32 +--
> > >  drivers/iio/buffer/industrialio-buffer-dmaengine.c |  15 +-
> > >  drivers/spi/spi-dw-dma.c                           |   6 +-
> > >  drivers/spi/spi-dw.h                               |   3 +-
> > >  include/linux/dmaengine.h                          | 234 ++++++++++++++++++++-
> > >  sound/core/pcm_dmaengine.c                         |  14 +-
> > >  10 files changed, 323 insertions(+), 64 deletions(-)
> > > ---
> > > base-commit: 7524fe142b5a772f8421aeee2132cf7e21a00103
> > > change-id: 20260615-dmaengine-support-wider-dma-masks-5aac12497e27
> > > --
> > >
> > > Thanks!
> > > - Nuno Sá
> > >
> > >

      reply	other threads:[~2026-07-31 15:51 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-30 14:23 [PATCH 0/9] dmaengine: Support bus widths of 32 bytes and above Nuno Sá via B4 Relay
2026-07-30 14:23 ` [PATCH 1/9] " Nuno Sá via B4 Relay
2026-07-30 14:38   ` sashiko-bot
2026-07-30 19:16   ` Frank Li
2026-08-01  2:42     ` Jonathan Cameron
2026-08-01  2:46       ` Jonathan Cameron
2026-07-30 14:23 ` [PATCH 2/9] dmaengine: dma-axi-dmac: Use bus width capability helpers Nuno Sá via B4 Relay
2026-07-30 14:39   ` sashiko-bot
2026-07-30 19:23   ` Frank Li
2026-07-30 14:23 ` [PATCH 3/9] dmaengine: dw-axi-dmac: " Nuno Sá via B4 Relay
2026-07-30 14:36   ` sashiko-bot
2026-07-30 19:24   ` Frank Li
2026-07-30 14:23 ` [PATCH 4/9] dmaengine: qcom: gpi: " Nuno Sá via B4 Relay
2026-07-30 14:43   ` sashiko-bot
2026-07-30 19:25   ` Frank Li
2026-07-30 14:23 ` [PATCH 5/9] dmaengine: stm32-dma3: " Nuno Sá via B4 Relay
2026-07-30 14:35   ` sashiko-bot
2026-07-30 19:26   ` Frank Li
2026-07-30 14:23 ` [PATCH 6/9] iio: buffer-dmaengine: Use dma_slave_caps bus width accessors Nuno Sá via B4 Relay
2026-07-30 19:27   ` Frank Li
2026-07-30 14:23 ` [PATCH 7/9] ALSA: pcm_dmaengine: Use dma_slave_caps bus width helpers Nuno Sá via B4 Relay
2026-07-30 19:30   ` Frank Li
2026-07-30 14:23 ` [PATCH 8/9] spi: dw: " Nuno Sá via B4 Relay
2026-07-30 14:43   ` sashiko-bot
2026-07-30 19:31   ` Frank Li
2026-07-30 14:23 ` [PATCH 9/9] dmaengine: Drop legacy bus width fields from dma_slave_caps Nuno Sá via B4 Relay
2026-07-30 19:34   ` Frank Li
2026-07-30 19:05 ` [PATCH 0/9] dmaengine: Support bus widths of 32 bytes and above Frank Li
2026-07-31 15:34   ` Nuno Sá
2026-07-31 15:51     ` Frank Li [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=amzEeR4A-py0E6Fj@SMW015318 \
    --to=frank.li@oss.nxp.com \
    --cc=Frank.Li@kernel.org \
    --cc=andy@kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=noname.nuno@gmail.com \
    --cc=nuno.sa@analog.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox