From: Frank Li <Frank.li@oss.nxp.com>
To: Rosen Penev <rosenp@gmail.com>
Cc: dmaengine@vger.kernel.org,
Ludovic Desroches <ludovic.desroches@microchip.com>,
Vinod Koul <vkoul@kernel.org>, Frank Li <Frank.Li@kernel.org>,
"moderated list:MICROCHIP AT91 DMA DRIVERS"
<linux-arm-kernel@lists.infradead.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCHv3] dmaengine: at_hdmac: use devm APIs in probe()
Date: Mon, 17 Aug 2026 16:37:57 -0500 [thread overview]
Message-ID: <aoN_NUzODjRb-IDd@SMW015318> (raw)
In-Reply-To: <20260817201200.10952-1-rosenp@gmail.com>
On Mon, Aug 17, 2026 at 01:12:00PM -0700, Rosen Penev wrote:
> Convert resource allocation and setup in probe() to use devm-managed APIs.
> Simplify the error handling path and removes explicit cleanup code.
>
> Assisted-by: opencode:big-pickle
> Signed-off-by: Rosen Penev <rosenp@gmail.com>
> ---
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> v3: fix subject and description
> v2: remove list_del
> drivers/dma/at_hdmac.c | 50 ++++++++++--------------------------------
> 1 file changed, 11 insertions(+), 39 deletions(-)
>
> diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
> index 971f8bc9ec48..49a85ac66e83 100644
> --- a/drivers/dma/at_hdmac.c
> +++ b/drivers/dma/at_hdmac.c
> @@ -1986,40 +1986,34 @@ static int __init at_dma_probe(struct platform_device *pdev)
> atdma->dma_device.cap_mask = plat_dat->cap_mask;
> atdma->all_chan_mask = (1 << plat_dat->nr_channels) - 1;
>
> - atdma->clk = devm_clk_get(&pdev->dev, "dma_clk");
> + atdma->clk = devm_clk_get_enabled(&pdev->dev, "dma_clk");
> if (IS_ERR(atdma->clk))
> return PTR_ERR(atdma->clk);
>
> - err = clk_prepare_enable(atdma->clk);
> - if (err)
> - return err;
> -
> /* force dma off, just in case */
> at_dma_off(atdma);
>
> - err = request_irq(irq, at_dma_interrupt, 0, "at_hdmac", atdma);
> + err = devm_request_irq(&pdev->dev, irq, at_dma_interrupt, 0, "at_hdmac", atdma);
> if (err)
> - goto err_irq;
> + return err;
>
> platform_set_drvdata(pdev, atdma);
>
> /* create a pool of consistent memory blocks for hardware descriptors */
> - atdma->lli_pool = dma_pool_create("at_hdmac_lli_pool",
> + atdma->lli_pool = dmam_pool_create("at_hdmac_lli_pool",
> &pdev->dev, sizeof(struct at_lli),
> 4 /* word alignment */, 0);
> if (!atdma->lli_pool) {
> dev_err(&pdev->dev, "Unable to allocate DMA LLI descriptor pool\n");
> - err = -ENOMEM;
> - goto err_desc_pool_create;
> + return -ENOMEM;
> }
>
> /* create a pool of consistent memory blocks for memset blocks */
> - atdma->memset_pool = dma_pool_create("at_hdmac_memset_pool",
> + atdma->memset_pool = dmam_pool_create("at_hdmac_memset_pool",
> &pdev->dev, sizeof(int), 4, 0);
> if (!atdma->memset_pool) {
> dev_err(&pdev->dev, "No memory for memset dma pool\n");
> - err = -ENOMEM;
> - goto err_memset_pool_create;
> + return -ENOMEM;
> }
>
> /* clear any pending interrupt */
> @@ -2086,10 +2080,10 @@ static int __init at_dma_probe(struct platform_device *pdev)
> dma_has_cap(DMA_SLAVE, atdma->dma_device.cap_mask) ? "slave " : "",
> plat_dat->nr_channels);
>
> - err = dma_async_device_register(&atdma->dma_device);
> + err = dmaenginem_async_device_register(&atdma->dma_device);
> if (err) {
> dev_err(&pdev->dev, "Unable to register: %d.\n", err);
> - goto err_dma_async_device_register;
> + return err;
> }
>
> /*
> @@ -2098,27 +2092,15 @@ static int __init at_dma_probe(struct platform_device *pdev)
> * dma_request_channel().
> */
> if (pdev->dev.of_node) {
> - err = of_dma_controller_register(pdev->dev.of_node,
> + err = devm_of_dma_controller_register(&pdev->dev, pdev->dev.of_node,
> at_dma_xlate, atdma);
> if (err) {
> dev_err(&pdev->dev, "could not register of_dma_controller\n");
> - goto err_of_dma_controller_register;
> + return err;
> }
> }
>
> return 0;
> -
> -err_of_dma_controller_register:
> - dma_async_device_unregister(&atdma->dma_device);
> -err_dma_async_device_register:
> - dma_pool_destroy(atdma->memset_pool);
> -err_memset_pool_create:
> - dma_pool_destroy(atdma->lli_pool);
> -err_desc_pool_create:
> - free_irq(platform_get_irq(pdev, 0), atdma);
> -err_irq:
> - clk_disable_unprepare(atdma->clk);
> - return err;
> }
>
> static void at_dma_remove(struct platform_device *pdev)
> @@ -2127,22 +2109,12 @@ static void at_dma_remove(struct platform_device *pdev)
> struct dma_chan *chan, *_chan;
>
> at_dma_off(atdma);
> - if (pdev->dev.of_node)
> - of_dma_controller_free(pdev->dev.of_node);
> - dma_async_device_unregister(&atdma->dma_device);
> -
> - dma_pool_destroy(atdma->memset_pool);
> - dma_pool_destroy(atdma->lli_pool);
> - free_irq(platform_get_irq(pdev, 0), atdma);
>
> list_for_each_entry_safe(chan, _chan, &atdma->dma_device.channels,
> device_node) {
> /* Disable interrupts */
> atc_disable_chan_irq(atdma, chan->chan_id);
> - list_del(&chan->device_node);
> }
> -
> - clk_disable_unprepare(atdma->clk);
> }
>
> static void at_dma_shutdown(struct platform_device *pdev)
> --
> 2.55.0
>
prev parent reply other threads:[~2026-08-17 21:38 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-17 20:12 [PATCHv3] dmaengine: at_hdmac: use devm APIs in probe() Rosen Penev
2026-08-17 20:25 ` sashiko-bot
2026-08-17 21:37 ` Frank Li [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aoN_NUzODjRb-IDd@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ludovic.desroches@microchip.com \
--cc=rosenp@gmail.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox