DMA Engine development
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@oss.nxp.com>
To: Shan-Chun Hung <shanchun1218@gmail.com>
Cc: ychuang3@nuvoton.com, schung@nuvoton.com, vkoul@kernel.org,
	Frank.Li@kernel.org, robh@kernel.org, krzk+dt@kernel.org,
	conor+dt@kernel.org, kees@kernel.org, gustavoars@kernel.org,
	linux-arm-kernel@lists.infradead.org, dmaengine@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-hardening@vger.kernel.org
Subject: Re: [PATCH v2 2/2] dmaengine: ma35d1-pdma: Add MA35D1 PDMA driver
Date: Mon, 16 Nov 2026 15:14:20 -0600	[thread overview]
Message-ID: <avtyLPRZB3uC5G_A@SMW015318> (raw)
In-Reply-To: <20261109052900.2960473-3-shanchun1218@gmail.com>

On Mon, Nov 09, 2026 at 01:29:00PM +0800, Shan-Chun Hung wrote:
> Add a driver for the PDMA controller found in the Nuvoton MA35D1 SoC.
> It supports up to 10 channels with memory-to-memory, slave scatter-gather
> and cyclic transfers.
>
> Signed-off-by: Shan-Chun Hung <shanchun1218@gmail.com>
> ---
...
> +
> +static struct ma35d1_desc *ma35d1_desc_alloc(struct ma35d1_chan *ch, u32 sg_len)
> +{
> +	struct ma35d1_desc *d;
> +
> +	d = kzalloc(struct_size(d, sg, sg_len), GFP_ATOMIC);
> +	if (!d)
> +		return NULL;

Generally, we use dma_alloc_coherence() or dma pool for desc. There are
extra complex if use kzalloc and dma_map_single(), which will cause second
bounce buffer at swiotlb.

> +
> +	d->sg_len = sg_len;
> +	d->dma_len = sizeof(*d->sg) * sg_len;
> +	d->dma_addr = dma_map_single(ch->dev, d->sg, d->dma_len, DMA_TO_DEVICE);
> +	if (dma_mapping_error(ch->dev, d->dma_addr)) {
> +		dev_err(ch->dev, "dma mapping error for channel\n");
> +		kfree(d);
> +		return NULL;
> +	}
> +
> +	return d;
> +}
> +
> +static struct dma_async_tx_descriptor *
> +ma35d1_desc_submit(struct ma35d1_chan *ch, struct ma35d1_desc *d, bool cyclic,
> +		   unsigned long tx_flags)
> +{
> +	dma_sync_single_for_device(ch->dev, d->dma_addr, d->dma_len, DMA_TO_DEVICE);
> +	d->cyclic = cyclic;
> +	d->ch = ch;
> +
> +	return vchan_tx_prep(&ch->vc, &d->vd, tx_flags);
> +}
> +
> +static struct dma_async_tx_descriptor *
> +ma35d1_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst, dma_addr_t src,
> +		       size_t len, unsigned long tx_flags)
> +{
> +	int i;
> +	size_t tlen, max_chunk;
> +	struct ma35d1_chan *ch = to_ma35d1_pdma_chan(chan);
> +	struct ma35d1_desc *d;
> +	u32 sg_len, width = 1;
> +
> +	if (ch->request != 0) {
> +		dev_err(ch->dev, "%s: channel is bound to a peripheral request\n", __func__);
> +		return NULL;
> +	}
> +
> +	if (!len) {
> +		dev_err(ch->dev, "invalid memcpy length\n");
> +		return NULL;
> +	}
> +
> +	if (IS_ALIGNED(src, 4) && IS_ALIGNED(dst, 4) && IS_ALIGNED(len, 4))
> +		width = 4;

where are field copy_align, you check it here.

> +
> +	max_chunk = (size_t)PDMA_MAX_CHAN_BEATS * width;
> +
> +	sg_len = DIV_ROUND_UP_ULL(len, max_chunk);
> +	d = ma35d1_desc_alloc(ch, sg_len);
> +	if (!d)
> +		return NULL;
> +
> +	for (i = 0; i < sg_len; i++) {
> +		tlen = min_t(size_t, len, max_chunk);
> +		d->sg[i].src = src;
> +		d->sg[i].dst = dst;
> +		d->sg[i].ctl = PDMA_WIDTH(width) | PDMA_TXCNT(tlen / width) | PDMA_TBINTDIS |
> +				PDMA_OP_SCATTER;
> +		d->sg[i].next = d->dma_addr + PDMA_CH_OFFSET(i + 1);
> +		src += tlen;
> +		dst += tlen;
> +		len -= tlen;
> +	}
> +	d->sg[sg_len - 1].ctl &= ~(PDMA_OP_MSK | PDMA_TBINTDIS);
> +	d->sg[sg_len - 1].ctl |= PDMA_OP_BASIC;
> +
> +	return ma35d1_desc_submit(ch, d, false, tx_flags);

Prep() don't submit request, dmaengine_submit() do it, move it submit()
call back.

> +}
> +
> +static struct dma_async_tx_descriptor *
> +ma35d1_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
> +		     u32 sg_len, enum dma_transfer_direction dir,
> +		     unsigned long tx_flags, void *context)
> +{
> +	int i, width;
> +	struct ma35d1_chan *ch = to_ma35d1_pdma_chan(chan);
> +	struct ma35d1_desc *d;
> +	struct scatterlist *sgent;
> +
> +	width = ma35d1_slave_width(ch, dir);
> +	if (width < 0)
> +		return NULL;
> +
> +	if (!sg_len) {
> +		dev_err(ch->dev, "SG entry length is zero\n");
> +		return NULL;
> +	}
> +
> +	for_each_sg(sgl, sgent, sg_len, i) {
> +		unsigned int len = sg_dma_len(sgent);
> +
> +		if (!len || len % width || len / width > PDMA_MAX_CHAN_BEATS) {
> +			dev_err(ch->dev, "invalid SG segment length %u\n", len);
> +			return NULL;
> +		}
> +
> +		if (!IS_ALIGNED(sg_dma_address(sgent), width)) {
> +			dev_err(ch->dev, "SG address not aligned to DMA width\n");
> +			return NULL;
> +		}
> +	}
> +
> +	d = ma35d1_desc_alloc(ch, sg_len);
> +	if (!d)
> +		return NULL;
> +
> +	for_each_sg(sgl, sgent, sg_len, i) {
> +		if (dir == DMA_MEM_TO_DEV) {
> +			d->sg[i].ctl = PDMA_WIDTH(width) | PDMA_DAFIX;
> +			d->sg[i].src = sg_dma_address(sgent);
> +			d->sg[i].dst = ch->cfg.dst_addr;
> +		} else {
> +			d->sg[i].ctl = PDMA_WIDTH(width) | PDMA_SAFIX;
> +			d->sg[i].src = ch->cfg.src_addr;
> +			d->sg[i].dst = sg_dma_address(sgent);
> +		}
> +		d->sg[i].ctl |= PDMA_TXCNT(sg_dma_len(sgent) / width) | PDMA_TBINTDIS |
> +				PDMA_TXTYPE | PDMA_OP_SCATTER;
> +		d->sg[i].next = d->dma_addr + PDMA_CH_OFFSET(i + 1);
> +	}
> +
> +	d->sg[sg_len - 1].ctl &= ~(PDMA_OP_MSK | PDMA_TBINTDIS);
> +	d->sg[sg_len - 1].ctl |= PDMA_OP_BASIC;
> +
> +	return ma35d1_desc_submit(ch, d, false, tx_flags);
> +}
> +
> +static struct dma_async_tx_descriptor *
> +ma35d1_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len,
> +		       size_t period_len, enum dma_transfer_direction dir,
> +		       unsigned long flags)
> +{
> +	int i, sg_len, width;
> +	size_t offset = 0;
> +	struct ma35d1_chan *ch = to_ma35d1_pdma_chan(chan);
> +	struct ma35d1_desc *d;
> +
> +	width = ma35d1_slave_width(ch, dir);
> +	if (width < 0)
> +		return NULL;
> +
> +	if (!buf_len || !period_len || period_len / width > PDMA_MAX_CHAN_BEATS) {
> +		dev_err(ch->dev, "Invalid buffer/period length\n");
> +		return NULL;
> +	}
> +
> +	if (buf_len % period_len) {
> +		dev_err(ch->dev, "Buffer length not multiple of period length\n");
> +		return NULL;
> +	}
> +
> +	if (period_len % width) {
> +		dev_err(ch->dev, "Period length must be a multiple of DMA width\n");
> +		return NULL;
> +	}
> +
> +	if (!IS_ALIGNED(dma_addr, width)) {
> +		dev_err(ch->dev, "Buffer address not aligned to DMA width\n");
> +		return NULL;
> +	}
> +
> +	sg_len = buf_len / period_len;
> +	d = ma35d1_desc_alloc(ch, sg_len);
> +	if (!d)
> +		return NULL;
> +
> +	/* Split the buffer into period size chunks. */
> +	for (offset = 0, i = 0; offset < buf_len; offset += period_len, i++) {
> +		if (dir == DMA_MEM_TO_DEV) {
> +			d->sg[i].ctl = PDMA_WIDTH(width) | PDMA_TXCNT(period_len / width) |
> +					PDMA_DAFIX;
> +			d->sg[i].src = dma_addr + offset;
> +			d->sg[i].dst = ch->cfg.dst_addr;
> +		} else {
> +			d->sg[i].ctl = PDMA_WIDTH(width) | PDMA_TXCNT(period_len / width) |
> +					PDMA_SAFIX;
> +			d->sg[i].src = ch->cfg.src_addr;
> +			d->sg[i].dst = dma_addr + offset;
> +		}
> +		d->sg[i].ctl |= PDMA_TXTYPE | PDMA_OP_SCATTER;
> +		d->sg[i].next = d->dma_addr + PDMA_CH_OFFSET(i + 1);
> +	}
> +	d->sg[sg_len - 1].next = d->dma_addr;
> +
> +	return ma35d1_desc_submit(ch, d, true, flags);
> +}
> +
> +static struct dma_chan *ma35d1_of_xlate(struct of_phandle_args *dma_spec, struct of_dma *of)
> +{
> +	struct ma35d1_pdmadev *pdmadev = of->of_dma_data;
> +	struct dma_chan *chan;
> +	unsigned int chan_id, reqsel;
> +
> +	if (dma_spec->args_count != 2)
> +		return NULL;
> +
> +	chan_id = dma_spec->args[0];
> +	reqsel = dma_spec->args[1];
> +	if (chan_id >= PDMA_MAX_CHANS || reqsel > GENMASK(7, 0))
> +		return NULL;
> +
> +	chan = dma_get_slave_channel(&pdmadev->channels[chan_id].vc.chan);
> +	if (chan)
> +		pdmadev->channels[chan_id].request = reqsel;
> +
> +	return chan;
> +}
> +
> +static void ma35d1_free_chan_resources(struct dma_chan *chan)
> +{
> +	struct ma35d1_chan *ch = to_ma35d1_pdma_chan(chan);
> +
> +	ma35d1_terminate_all(chan);
> +	vchan_free_chan_resources(&ch->vc);
> +	ch->request = 0;
> +	memset(&ch->cfg, 0, sizeof(ch->cfg));
> +}
> +
> +static void ma35d1_pdma_start(struct ma35d1_chan *ch)
> +{
> +	struct ma35d1_desc *d = ch->desc;
> +
> +	if (d->sg_len == 1 && !d->cyclic) {
> +		writel(d->sg[0].src, ch->base + PDMA_CH_OFFSET(ch->id) + PDMA_DSCT_SA);
> +		writel(d->sg[0].dst, ch->base + PDMA_CH_OFFSET(ch->id) + PDMA_DSCT_DA);
> +		writel(d->sg[0].ctl, ch->base + PDMA_CH_OFFSET(ch->id) + PDMA_DSCT_CTL);
> +	} else {
> +		writel(d->dma_addr, ch->base + PDMA_CH_OFFSET(ch->id) + PDMA_DSCT_NEXT);
> +		ma35d1_pdma_reg_clear(ch, PDMA_CH_OFFSET(ch->id) + PDMA_DSCT_CTL, PDMA_OP_MSK);
> +		ma35d1_pdma_reg_set(ch, PDMA_CH_OFFSET(ch->id) + PDMA_DSCT_CTL, PDMA_OP_SCATTER);
> +	}
> +
> +	/* Memory-to-memory has no peripheral request, so trigger it by software. */
> +	if (ch->request == 0)
> +		writel(BIT(ch->id), ch->base + PDMA_SWREQ);
> +}
> +
> +static void ma35d1_pdma_start_desc(struct dma_chan *chan)
> +{
> +	struct ma35d1_chan *ch = to_ma35d1_pdma_chan(chan);
> +	struct virt_dma_desc *vd;
> +
> +	vd = vchan_next_desc(&ch->vc);
> +	if (!vd) {
> +		ch->desc = NULL;
> +		return;
> +	}
> +
> +	list_del(&vd->node);
> +	ch->desc = to_ma35d1_pdma_desc(vd);
> +	ma35d1_pdma_setup_channel(ch);
> +	ma35d1_pdma_start(ch);
> +}
> +
> +static void ma35d1_issue_pending(struct dma_chan *chan)
> +{
> +	struct ma35d1_chan *ch = to_ma35d1_pdma_chan(chan);
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&ch->vc.lock, flags);
> +
> +	if (vchan_issue_pending(&ch->vc) && !ch->desc)
> +		ma35d1_pdma_start_desc(chan);
> +
> +	spin_unlock_irqrestore(&ch->vc.lock, flags);
> +}
> +
> +static void ma35d1_pdma_complete(struct ma35d1_chan *ch)
> +{
> +	if (!ch->desc)
> +		return;
> +
> +	vchan_cookie_complete(&ch->desc->vd);
> +	ma35d1_pdma_start_desc(&ch->vc.chan);
> +}
> +
> +static irqreturn_t ma35d1_pdma_interrupt(int irq, void *devid)
> +{
> +	int i;
> +	bool handled = false;
> +	struct ma35d1_pdmadev *pdmadev = devid;
> +	struct ma35d1_chan *ch;
> +
> +	for (i = 0; i < PDMA_MAX_CHANS; i++) {
> +		unsigned long flags;
> +		bool done, abort;
> +
> +		ch = &pdmadev->channels[i];
> +
> +		spin_lock_irqsave(&ch->vc.lock, flags);
> +
> +		done = readl(ch->base + PDMA_TDSTS) & BIT(i);
> +		abort = readl(ch->base + PDMA_ABTSTS) & BIT(i);
> +
> +		if (done || abort) {
> +			handled = true;
> +
> +			/* Ack both flags first so a new descriptor is not completed twice. */
> +			writel(BIT(i), ch->base + PDMA_TDSTS);
> +			writel(BIT(i), ch->base + PDMA_ABTSTS);


done = readl(ch->base + PDMA_TDSTS);
abort = readl(ch->base + PDMA_ABTSTS);
writel(done, ch->base + PDMA_TDSTS);
writel(abort, ch->base + PDMA_ABTSTS);

for_each_bit(done | abort) {
	...
}

> +
> +			if (ch->desc) {
> +				if (abort) {
> +					ch->desc->vd.tx_result.result = DMA_TRANS_ABORTED;
> +					ma35d1_pdma_complete(ch);
> +				} else if (ch->desc->cyclic) {
> +					vchan_cyclic_callback(&ch->desc->vd);
> +				} else {
> +					ma35d1_pdma_complete(ch);
> +				}
> +			}
> +		}
> +
> +		spin_unlock_irqrestore(&ch->vc.lock, flags);
> +	}
> +
> +	return handled ? IRQ_HANDLED : IRQ_NONE;
> +}
> +
> +static int ma35d1_pdma_probe(struct platform_device *pdev)
> +{
> +	int i, ret;
> +	struct clk *pdma_clk;
> +	struct reset_control *rst;
> +	struct device *dev = &pdev->dev;
> +	struct device_node *node = dev->of_node;
> +	struct ma35d1_chan *ch;
> +	struct ma35d1_pdmadev *pdmadev;
> +	void __iomem *reg_base;
> +
> +	pdma_clk = devm_clk_get_enabled(dev, NULL);
> +	if (IS_ERR(pdma_clk))
> +		return dev_err_probe(dev, PTR_ERR(pdma_clk), "Failed to get clk\n");
> +
> +	rst = devm_reset_control_get_optional_exclusive_deasserted(dev, NULL);
> +	if (IS_ERR(rst))
> +		return dev_err_probe(dev, PTR_ERR(rst), "Failed to get reset\n");
> +
> +	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
> +	if (ret)
> +		return ret;
> +
> +	pdmadev = devm_kzalloc(dev, sizeof(*pdmadev), GFP_KERNEL);
> +	if (!pdmadev)
> +		return -ENOMEM;
> +
> +	pdmadev->irq = platform_get_irq(pdev, 0);
> +	if (pdmadev->irq < 0)
> +		return pdmadev->irq;
> +
> +	reg_base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(reg_base))
> +		return dev_err_probe(dev, PTR_ERR(reg_base),
> +				     "Failed to map pdma global registers\n");
> +
> +	dma_cap_zero(pdmadev->ddev.cap_mask);
> +	dma_cap_set(DMA_SLAVE, pdmadev->ddev.cap_mask);
> +	dma_cap_set(DMA_PRIVATE, pdmadev->ddev.cap_mask);
> +	dma_cap_set(DMA_MEMCPY, pdmadev->ddev.cap_mask);
> +	dma_cap_set(DMA_CYCLIC, pdmadev->ddev.cap_mask);
> +
> +	pdmadev->ddev.dev = dev;
> +	pdmadev->ddev.src_addr_widths = PDMA_SLAVE_BUSWIDTHS;
> +	pdmadev->ddev.dst_addr_widths = PDMA_SLAVE_BUSWIDTHS;
> +	pdmadev->ddev.directions = BIT(DMA_MEM_TO_DEV) | BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_MEM);
> +	pdmadev->ddev.device_prep_dma_memcpy = ma35d1_prep_dma_memcpy;
> +	pdmadev->ddev.device_prep_slave_sg = ma35d1_prep_slave_sg;
> +	pdmadev->ddev.device_prep_dma_cyclic = ma35d1_prep_dma_cyclic;
> +	pdmadev->ddev.device_free_chan_resources = ma35d1_free_chan_resources;
> +	pdmadev->ddev.device_issue_pending = ma35d1_issue_pending;
> +	pdmadev->ddev.device_tx_status = dma_cookie_status;
> +	pdmadev->ddev.device_config = ma35d1_slave_config;
> +	pdmadev->ddev.device_terminate_all = ma35d1_terminate_all;
> +	pdmadev->ddev.device_synchronize = ma35d1_synchronize;
> +
> +	spin_lock_init(&pdmadev->lock);
> +	INIT_LIST_HEAD(&pdmadev->ddev.channels);
> +	for (i = 0; i < PDMA_MAX_CHANS; i++) {
> +		ch = &pdmadev->channels[i];
> +		ch->dev = dev;
> +		ch->pdmadev = pdmadev;
> +		ch->id = i;
> +		ch->base = reg_base;
> +		ch->vc.desc_free = ma35d1_pdma_desc_free;
> +		vchan_init(&ch->vc, &pdmadev->ddev);
> +	}
> +
> +	ret = devm_request_irq(dev, pdmadev->irq, ma35d1_pdma_interrupt, 0, pdev->name, pdmadev);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Failed to request IRQ\n");

Move irq request after register device()

> +
> +	platform_set_drvdata(pdev, pdmadev);
> +
> +	ret = dma_async_device_register(&pdmadev->ddev);

dmaenginem_async_device_register();

> +	if (ret)
> +		return ret;
> +
> +	ret = of_dma_controller_register(node, ma35d1_of_xlate, pdmadev);

devm_of_dma_controller_register();

Frank

> +	if (ret) {
> +		dma_async_device_unregister(&pdmadev->ddev);
> +		for (i = 0; i < PDMA_MAX_CHANS; i++)
> +			tasklet_kill(&pdmadev->channels[i].vc.task);
> +		return dev_err_probe(dev, ret, "of_dma_controller_register failed\n");
> +	}
> +
> +	return 0;
> +}
> +
> +static void ma35d1_pdma_remove(struct platform_device *pdev)
> +{
> +	struct ma35d1_pdmadev *pdmadev = platform_get_drvdata(pdev);
> +	void __iomem *base = pdmadev->channels[0].base;
> +	int i;
> +
> +	/* Stop new requests before the hardware is quiesced. */
> +	of_dma_controller_free(pdev->dev.of_node);
> +	dma_async_device_unregister(&pdmadev->ddev);
> +
> +	writel(0, base + PDMA_CHCTL);
> +	writel(0, base + PDMA_INTEN);
> +	synchronize_irq(pdmadev->irq);
> +
> +	for (i = 0; i < PDMA_MAX_CHANS; i++)
> +		tasklet_kill(&pdmadev->channels[i].vc.task);
> +}
> +
> +static const struct of_device_id ma35d1_pdma_match[] = {
> +	{ .compatible = "nuvoton,ma35d1-pdma" },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, ma35d1_pdma_match);
> +
> +static struct platform_driver ma35d1_pdma_driver = {
> +	.probe = ma35d1_pdma_probe,
> +	.remove = ma35d1_pdma_remove,
> +	.driver = {
> +		.name = "ma35d1-pdma",
> +		.of_match_table = ma35d1_pdma_match,
> +	},
> +};
> +module_platform_driver(ma35d1_pdma_driver);
> +
> +MODULE_DESCRIPTION("PDMA controller driver for Nuvoton MA35D1");
> +MODULE_AUTHOR("Shan-Chun Hung <shanchun1218@gmail.com>");
> +MODULE_LICENSE("GPL");
> --
> 2.25.1
>

      parent reply	other threads:[~2026-11-16 21:14 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-09  5:28 [PATCH v2 0/2] dmaengine: ma35d1-pdma: Add MA35D1 PDMA driver Shan-Chun Hung
2026-11-09  5:28 ` [PATCH v2 1/2] dt-bindings: dma: nuvoton,ma35d1-pdma: Document MA35D1 PDMA controller Shan-Chun Hung
2026-11-09 13:16   ` Krzysztof Kozlowski
2026-11-10  0:39     ` Shan-Chun Hung
2026-11-16 20:59   ` Frank Li
2026-11-09  5:29 ` [PATCH v2 2/2] dmaengine: ma35d1-pdma: Add MA35D1 PDMA driver Shan-Chun Hung
2026-11-09  5:58   ` sashiko-bot
2026-11-16 21:14   ` Frank Li [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=avtyLPRZB3uC5G_A@SMW015318 \
    --to=frank.li@oss.nxp.com \
    --cc=Frank.Li@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=gustavoars@kernel.org \
    --cc=kees@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-hardening@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=schung@nuvoton.com \
    --cc=shanchun1218@gmail.com \
    --cc=vkoul@kernel.org \
    --cc=ychuang3@nuvoton.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox