From: Frank Li <Frank.li@oss.nxp.com>
To: tumic@gpxsee.org
Cc: "Lizhi Hou" <lizhi.hou@amd.com>, "Brian Xu" <brian.xu@amd.com>,
"Raj Kumar Rampelli" <raj.kumar.rampelli@amd.com>,
"Vinod Koul" <vkoul@kernel.org>, "Frank Li" <Frank.Li@kernel.org>,
"Michal Simek" <michal.simek@amd.com>,
dmaengine@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
"Martin Tůma" <martin.tuma@digiteqautomotive.com>
Subject: Re: [PATCH v2 1/1] dmaengine: xilinx: xdma: Fix broken PM suspend/resume
Date: Fri, 20 Nov 2026 10:56:46 -0600 [thread overview]
Message-ID: <awB7zvk3iRr6NmPS@SMW015318> (raw)
In-Reply-To: <20261120155924.5785-2-tumic@gpxsee.org>
On Fri, Nov 20, 2026 at 04:59:24PM +0100, tumic@gpxsee.org wrote:
> [You don't often get email from tumic@gpxsee.org. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
>
> From: Martin Tůma <martin.tuma@digiteqautomotive.com>
>
> Add the missing PM suspend/resume callbacks that properly reconfigure
> the XDMA HW on PCIe suspend/resume.
why need reconfigure irq ?
Frank
>
> Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
> ---
> drivers/dma/xilinx/xdma.c | 121 ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 121 insertions(+)
>
> diff --git a/drivers/dma/xilinx/xdma.c b/drivers/dma/xilinx/xdma.c
> index 9d827c9a1267..fa006c9bae23 100644
> --- a/drivers/dma/xilinx/xdma.c
> +++ b/drivers/dma/xilinx/xdma.c
> @@ -123,6 +123,7 @@ struct xdma_desc {
> * @irq_start: Start IRQ assigned to device
> * @irq_num: Number of IRQ assigned to device
> * @status: Initialization status
> + * @pm_usr_irq: User IRQ vector storage for PM suspend/resume
> */
> struct xdma_device {
> struct platform_device *pdev;
> @@ -135,6 +136,7 @@ struct xdma_device {
> u32 irq_start;
> u32 irq_num;
> u32 status;
> + u32 pm_usr_irq;
> };
>
> #define xdma_err(xdev, fmt, args...) \
> @@ -398,6 +400,28 @@ static int xdma_xfer_stop(struct xdma_chan *xchan)
> CHAN_CTRL_RUN_STOP);
> }
>
> +/**
> + * xdma_reconfig_channels - Reconfigure DMA channels
> + * @xdev: DMA device pointer
> + * @chans: channels configuration
> + * @chan_num: number of channels
> + */
> +static int xdma_reconfig_channels(struct xdma_device *xdev,
> + struct xdma_chan *chans,
> + u32 chan_num)
> +{
> + int i, ret;
> +
> + for (i = 0; i < chan_num; i++) {
> + /* init channel hardware */
> + ret = xdma_channel_init(&(chans[i]));
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> /**
> * xdma_alloc_channels - Detect and allocate DMA channels
> * @xdev: DMA device pointer
> @@ -1018,6 +1042,53 @@ static int xdma_set_vector_reg(struct xdma_device *xdev, u32 vec_tbl_start,
> return 0;
> }
>
> +/**
> + * xdma_irq_reconfig - Reconfigure IRQs
> + * @xdev: DMA device pointer
> + */
> +static int xdma_irq_reconfig(struct xdma_device *xdev)
> +{
> + u32 user_irq_start;
> + int ret;
> +
> + /* reconfigure hardware IRQ registers */
> + ret = xdma_set_vector_reg(xdev, XDMA_IRQ_CHAN_VEC_NUM, 0,
> + XDMA_CHAN_NUM(xdev));
> + if (ret) {
> + xdma_err(xdev, "failed to reset channel vectors: %d", ret);
> + return ret;
> + }
> +
> + /* reconfigure user IRQ registers if needed */
> + user_irq_start = XDMA_CHAN_NUM(xdev);
> + if (xdev->irq_num > user_irq_start) {
> + ret = xdma_set_vector_reg(xdev, XDMA_IRQ_USER_VEC_NUM,
> + user_irq_start,
> + xdev->irq_num - user_irq_start);
> + if (ret) {
> + xdma_err(xdev, "failed to reset user vectors: %d", ret);
> + return ret;
> + }
> + }
> +
> + /* reenable channels interrupts */
> + ret = regmap_write(xdev->rmap, XDMA_IRQ_CHAN_INT_EN_W1S, ~0);
> + if (ret) {
> + xdma_err(xdev, "failed to reenable channel IRQs: %d", ret);
> + return ret;
> + }
> +
> + /* reenable user interrupts */
> + ret = regmap_write(xdev->rmap, XDMA_IRQ_USER_INT_EN_W1S,
> + xdev->pm_usr_irq);
> + if (ret) {
> + xdma_err(xdev, "failed to reenable user IRQs: %d", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> /**
> * xdma_irq_init - initialize IRQs
> * @xdev: DMA device pointer
> @@ -1297,15 +1368,65 @@ static int xdma_probe(struct platform_device *pdev)
> return ret;
> }
>
> +/**
> + * xdma_suspend - PM suspend callback
> + * @dev: XDMA device pointer
> + */
> +static int xdma_suspend(struct device *dev)
> +{
> + struct xdma_device *xdev = dev_get_drvdata(dev);
> + int ret;
> +
> + ret = regmap_read(xdev->rmap, XDMA_IRQ_USER_INT_EN,
> + &xdev->pm_usr_irq);
> + if (ret) {
> + xdma_err(xdev, "User IRQ vector backup failed: %d", ret);
> + return ret;
> + }
> +
> + ret = regmap_write(xdev->rmap, XDMA_IRQ_CHAN_INT_EN_W1C, ~0);
> + if (ret)
> + xdma_err(xdev, "DMA channels IRQ disable failed: %d", ret);
> +
> + return ret;
> +}
> +
> +/**
> + * xdma_resume - PM resume callback
> + * @dev: XDMA device pointer
> + */
> +static int xdma_resume(struct device *dev)
> +{
> + struct xdma_device *xdev = dev_get_drvdata(dev);
> + int ret;
> +
> + ret = xdma_reconfig_channels(xdev, xdev->h2c_chans, xdev->h2c_chan_num);
> + if (ret) {
> + xdma_err(xdev, "H2C channels reconfiguration failed: %d", ret);
> + return ret;
> + }
> +
> + ret = xdma_reconfig_channels(xdev, xdev->c2h_chans, xdev->c2h_chan_num);
> + if (ret) {
> + xdma_err(xdev, "C2H channels reconfiguration failed: %d", ret);
> + return ret;
> + }
> +
> + return xdma_irq_reconfig(xdev);
> +}
> +
> static const struct platform_device_id xdma_id_table[] = {
> { "xdma", 0},
> { },
> };
> MODULE_DEVICE_TABLE(platform, xdma_id_table);
>
> +static DEFINE_NOIRQ_DEV_PM_OPS(xdma_dev_pm_ops, xdma_suspend, xdma_resume);
> +
> static struct platform_driver xdma_driver = {
> .driver = {
> .name = "xdma",
> + .pm = pm_sleep_ptr(&xdma_dev_pm_ops),
> },
> .id_table = xdma_id_table,
> .probe = xdma_probe,
> --
> 2.56.1
>
next prev parent reply other threads:[~2026-11-20 16:57 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-20 15:59 [PATCH v2 0/1] dmaengine: xilinx: xdma: Fix broken PM suspend/resume tumic
2026-11-20 15:59 ` [PATCH v2 1/1] " tumic
2026-11-20 16:13 ` sashiko-bot
2026-11-20 16:56 ` Frank Li [this message]
2026-11-20 17:19 ` Martin Tůma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=awB7zvk3iRr6NmPS@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@kernel.org \
--cc=brian.xu@amd.com \
--cc=dmaengine@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=lizhi.hou@amd.com \
--cc=martin.tuma@digiteqautomotive.com \
--cc=michal.simek@amd.com \
--cc=raj.kumar.rampelli@amd.com \
--cc=tumic@gpxsee.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox