From: Jay Rolette <rolette-bIuJOMs36aleGPcbtGPokg@public.gmane.org>
To: dev-VfR2kkLFssw@public.gmane.org
Subject: [PATCH] replaced O(n^2) sort in sort_by_physaddr() with qsort() from standard library
Date: Wed, 17 Dec 2014 07:31:17 -0600 [thread overview]
Message-ID: <1418823077-9129-1-git-send-email-rolette@infiniteio.com> (raw)
Signed-off-by: Jay Rolette <rolette-bIuJOMs36aleGPcbtGPokg@public.gmane.org>
---
lib/librte_eal/linuxapp/eal/eal_memory.c | 59 +++++++++++---------------------
1 file changed, 20 insertions(+), 39 deletions(-)
diff --git a/lib/librte_eal/linuxapp/eal/eal_memory.c b/lib/librte_eal/linuxapp/eal/eal_memory.c
index bae2507..3656515 100644
--- a/lib/librte_eal/linuxapp/eal/eal_memory.c
+++ b/lib/librte_eal/linuxapp/eal/eal_memory.c
@@ -670,6 +670,25 @@ error:
return -1;
}
+static int
+cmp_physaddr(const void *a, const void *b)
+{
+#ifndef RTE_ARCH_PPC_64
+ const struct hugepage_file *p1 = (const struct hugepage_file *)a;
+ const struct hugepage_file *p2 = (const struct hugepage_file *)b;
+#else
+ // PowerPC needs memory sorted in reverse order from x86
+ const struct hugepage_file *p1 = (const struct hugepage_file *)b;
+ const struct hugepage_file *p2 = (const struct hugepage_file *)a;
+#endif
+ if (p1->physaddr < p2->physaddr)
+ return -1;
+ else if (p1->physaddr > p2->physaddr)
+ return 1;
+ else
+ return 0;
+}
+
/*
* Sort the hugepg_tbl by physical address (lower addresses first on x86,
* higher address first on powerpc). We use a slow algorithm, but we won't
@@ -678,45 +697,7 @@ error:
static int
sort_by_physaddr(struct hugepage_file *hugepg_tbl, struct hugepage_info *hpi)
{
- unsigned i, j;
- int compare_idx;
- uint64_t compare_addr;
- struct hugepage_file tmp;
-
- for (i = 0; i < hpi->num_pages[0]; i++) {
- compare_addr = 0;
- compare_idx = -1;
-
- /*
- * browse all entries starting at 'i', and find the
- * entry with the smallest addr
- */
- for (j=i; j< hpi->num_pages[0]; j++) {
-
- if (compare_addr == 0 ||
-#ifdef RTE_ARCH_PPC_64
- hugepg_tbl[j].physaddr > compare_addr) {
-#else
- hugepg_tbl[j].physaddr < compare_addr) {
-#endif
- compare_addr = hugepg_tbl[j].physaddr;
- compare_idx = j;
- }
- }
-
- /* should not happen */
- if (compare_idx == -1) {
- RTE_LOG(ERR, EAL, "%s(): error in physaddr sorting\n", __func__);
- return -1;
- }
-
- /* swap the 2 entries in the table */
- memcpy(&tmp, &hugepg_tbl[compare_idx],
- sizeof(struct hugepage_file));
- memcpy(&hugepg_tbl[compare_idx], &hugepg_tbl[i],
- sizeof(struct hugepage_file));
- memcpy(&hugepg_tbl[i], &tmp, sizeof(struct hugepage_file));
- }
+ qsort(hugepg_tbl, hpi->num_pages[0], sizeof(struct hugepage_file), cmp_physaddr);
return 0;
}
--
1.9.3 (Apple Git-50)
next reply other threads:[~2014-12-17 13:31 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-17 13:31 Jay Rolette [this message]
[not found] ` <1418823077-9129-1-git-send-email-rolette-bIuJOMs36aleGPcbtGPokg@public.gmane.org>
2014-12-17 14:27 ` [PATCH] replaced O(n^2) sort in sort_by_physaddr() with qsort() from standard library Thomas Monjalon
2014-12-17 15:07 ` Jay Rolette
[not found] ` <CADNuJVpObspy7zW6D4Aww8LZNezgP8twrYp_Hej5ZFD1+L0ZKQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-12-17 15:27 ` Bruce Richardson
2015-09-09 10:35 ` Gonzalez Monroy, Sergio
2015-09-10 11:49 ` Jay Rolette
-- strict thread matches above, loose matches on Subject: below --
2014-12-11 16:05 Jay Rolette
[not found] ` <CADNuJVo6=MuC5pJV4ew8Rr1Mu=PwUUsB=QwgKaRDcCZO6VBfhg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-12-15 9:05 ` Wodkowski, PawelX
[not found] ` <F6F2A6264E145F47A18AB6DF8E87425D12B79E1A-kPTMFJFq+rFP9JyJpTNKArfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2014-12-15 13:17 ` Jay Rolette
[not found] ` <CADNuJVqMqbS43ektC0wKnXxx_hy902uj1pigdXZoaOnRnb2pQw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-12-15 13:20 ` Wodkowski, PawelX
[not found] ` <F6F2A6264E145F47A18AB6DF8E87425D12B79F22-kPTMFJFq+rFP9JyJpTNKArfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2014-12-15 14:29 ` Jay Rolette
[not found] ` <CADNuJVr3oaAYRuWD29N1j=ZW4TMX_X83K_mxanfR7gOq7mhW9w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-12-15 14:55 ` Richardson, Bruce
2014-12-15 14:24 ` Ananyev, Konstantin
2014-12-16 18:39 ` Ananyev, Konstantin
[not found] ` <2601191342CEEE43887BDE71AB977258213C1357-kPTMFJFq+rEu0RiL9chJVbfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2014-12-16 19:18 ` Jay Rolette
[not found] ` <CADNuJVrfiX=wSp5HzU0ZTKP5owi=PN-GM39a9YY8v0-9sH84-A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-12-16 19:20 ` Jay Rolette
[not found] ` <CADNuJVoJOjbYfh4KQKhOfpj+oK88zHDHfHBjRCfzKoQpjgDnbQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-12-17 11:00 ` Ananyev, Konstantin
2014-12-17 13:08 ` Qiu, Michael
[not found] ` <533710CFB86FA344BFBF2D6802E60286CA0963-0J0gbvR4kThpB2pF5aRoyrfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2014-12-17 13:35 ` Jay Rolette
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1418823077-9129-1-git-send-email-rolette@infiniteio.com \
--to=rolette-biujoms36alegpcbtgpokg@public.gmane.org \
--cc=dev-VfR2kkLFssw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).