[PATCH v4 04/15] Change config files to add fm10k into compile

["Chen Jing D(Mark)" <jing.d.chen-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>]

From: Jeff Shaw <jeffrey.b.shaw-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>

1. Change config/common_bsdapp and config/common_linuxapp, add
   macros to control fm10k pmd driver compile for linux and bsd.
2. Change lib/Makefile to add fm10k driver into compile list.
3. Change mk/rte.app.mk to add fm10k lib into link.

Signed-off-by: Jeff Shaw <jeffrey.b.shaw-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
 config/common_bsdapp   |   11 +++++++++++
 config/common_linuxapp |   11 +++++++++++
 lib/Makefile           |    1 +
 mk/rte.app.mk          |    4 ++++
 4 files changed, 27 insertions(+), 0 deletions(-)

diff --git a/config/common_bsdapp b/config/common_bsdapp
index 9177db1..77e8a64 100644
--- a/config/common_bsdapp
+++ b/config/common_bsdapp
@@ -182,6 +182,17 @@ CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
 CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
 
 #
+# Compile burst-oriented FM10K PMD
+#
+CONFIG_RTE_LIBRTE_FM10K_PMD=y
+CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
+CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
+
+#
 # Compile burst-oriented Cisco ENIC PMD driver
 #
 CONFIG_RTE_LIBRTE_ENIC_PMD=y
diff --git a/config/common_linuxapp b/config/common_linuxapp
index 2f9643b..b076b5d 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -180,6 +180,17 @@ CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
 CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
 
 #
+# Compile burst-oriented FM10K PMD
+#
+CONFIG_RTE_LIBRTE_FM10K_PMD=y
+CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
+CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
+
+#
 # Compile burst-oriented Cisco ENIC PMD driver
 #
 CONFIG_RTE_LIBRTE_ENIC_PMD=y
diff --git a/lib/Makefile b/lib/Makefile
index 0ffc982..b1f3860 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -43,6 +43,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_ETHER) += librte_ether
 DIRS-$(CONFIG_RTE_LIBRTE_E1000_PMD) += librte_pmd_e1000
 DIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += librte_pmd_ixgbe
 DIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += librte_pmd_i40e
+DIRS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += librte_pmd_fm10k
 DIRS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += librte_pmd_enic
 DIRS-$(CONFIG_RTE_LIBRTE_PMD_BOND) += librte_pmd_bond
 DIRS-$(CONFIG_RTE_LIBRTE_PMD_RING) += librte_pmd_ring
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 4294d9a..87d8763 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -211,6 +211,10 @@ ifeq ($(CONFIG_RTE_LIBRTE_I40E_PMD),y)
 LDLIBS += -lrte_pmd_i40e
 endif
 
+ifeq ($(CONFIG_RTE_LIBRTE_FM10K_PMD),y)
+LDLIBS += -lrte_pmd_fm10k
+endif
+
 ifeq ($(CONFIG_RTE_LIBRTE_IXGBE_PMD),y)
 LDLIBS += -lrte_pmd_ixgbe
 endif
-- 
1.7.7.6