[PATCH v3 10/10] vmxnet3: remove excess inlining

[Stephen Hemminger <stephen-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>]

From: Stephen Hemminger <shemming-43mecJUBy8ZBDgjK7y7TUQ@public.gmane.org>

No reason to inline large functions. Compiler will decide already
based on optimization level.

Also register array should be const.

Signed-off-by: Stephen Hemminger <stephen-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
---
 lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c b/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
index f6c3452..cabb505 100644
--- a/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
+++ b/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
@@ -84,10 +84,8 @@
 #define RTE_MBUF_DATA_DMA_ADDR_DEFAULT(mb) \
 	(uint64_t) ((mb)->buf_physaddr + RTE_PKTMBUF_HEADROOM)
 
-static uint32_t rxprod_reg[2] = {VMXNET3_REG_RXPROD, VMXNET3_REG_RXPROD2};
+static const uint32_t rxprod_reg[2] = {VMXNET3_REG_RXPROD, VMXNET3_REG_RXPROD2};
 
-static inline int vmxnet3_post_rx_bufs(vmxnet3_rx_queue_t* , uint8_t);
-static inline void vmxnet3_tq_tx_complete(vmxnet3_tx_queue_t *);
 #ifdef RTE_LIBRTE_VMXNET3_DEBUG_DRIVER_NOT_USED
 static void vmxnet3_rxq_dump(struct vmxnet3_rx_queue *);
 static void vmxnet3_txq_dump(struct vmxnet3_tx_queue *);
@@ -157,7 +155,7 @@ vmxnet3_txq_dump(struct vmxnet3_tx_queue *txq)
 }
 #endif
 
-static inline void
+static void
 vmxnet3_cmd_ring_release_mbufs(vmxnet3_cmd_ring_t *ring)
 {
 	while (ring->next2comp != ring->next2fill) {
@@ -296,7 +294,7 @@ vmxnet3_dev_clear_queues(struct rte_eth_dev *dev)
 	}
 }
 
-static inline void
+static void
 vmxnet3_tq_tx_complete(vmxnet3_tx_queue_t *txq)
 {
 	int completed = 0;
@@ -472,7 +470,7 @@ vmxnet3_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
  *      only for LRO.
  *
  */
-static inline int
+static int
 vmxnet3_post_rx_bufs(vmxnet3_rx_queue_t *rxq, uint8_t ring_id)
 {
 	int err = 0;
-- 
2.1.4