From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jasvinder Singh Subject: [PATCH 2/2] ip_pipeline: enable swap action in network layers configuration file Date: Fri, 26 Aug 2016 22:21:45 +0100 Message-ID: <1472246505-55970-2-git-send-email-jasvinder.singh@intel.com> References: <1472246505-55970-1-git-send-email-jasvinder.singh@intel.com> Cc: cristian.dumitrescu@intel.com To: dev@dpdk.org Return-path: Received: from mga02.intel.com (mga02.intel.com [134.134.136.20]) by dpdk.org (Postfix) with ESMTP id A2A9A5398 for ; Fri, 26 Aug 2016 23:13:53 +0200 (CEST) In-Reply-To: <1472246505-55970-1-git-send-email-jasvinder.singh@intel.com> List-Id: patches and discussions about DPDK List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" The network_layers configuration file (config/network_layers.cfg) demonstrates the various network layer components such as TCP, UDP, ICMP etc, which can be easily integrated into ip pipeline infrastructure. The loopback function (implemented using passthrough pipeline) is updated to perform swap operation on the IP source and destination address, and UDP source and destination ports. Signed-off-by: Jasvinder Singh Acked-by: Cristian Dumitrescu --- examples/ip_pipeline/config/network_layers.cfg | 4 ++++ examples/ip_pipeline/config/network_layers.sh | 10 +++++----- 2 files changed, 9 insertions(+), 5 deletions(-) diff --git a/examples/ip_pipeline/config/network_layers.cfg b/examples/ip_pipeline/config/network_layers.cfg index 8054d9f..397b5d7 100644 --- a/examples/ip_pipeline/config/network_layers.cfg +++ b/examples/ip_pipeline/config/network_layers.cfg @@ -203,12 +203,16 @@ type = PASS-THROUGH ; Loop-back (UDP place-holder) core = 1 pktq_in = SWQ2 pktq_out = SWQ0 +swap = 282 286 ; IPSRC <-> IPDST +swap = 290 292 ; PORTSRC <-> PORTDST [PIPELINE5] type = PASS-THROUGH ; Loop-back (TCP place-holder) core = 1 pktq_in = SWQ3 pktq_out = SWQ1 +swap = 282 286 ; IPSRC <-> IPDST +swap = 290 292 ; PORTSRC <-> PORTDST [PIPELINE6] type = PASS-THROUGH ; Drop (ICMP place-holder) diff --git a/examples/ip_pipeline/config/network_layers.sh b/examples/ip_pipeline/config/network_layers.sh index 3b86beb..449b006 100644 --- a/examples/ip_pipeline/config/network_layers.sh +++ b/examples/ip_pipeline/config/network_layers.sh @@ -56,7 +56,7 @@ p 1 route add 100.3.0.0 16 port 3 ether 10.3.0.2 # Prio = 1 (High): [SA = ANY, DA = 10.1.0.1, SP = ANY, DP = 1001, PROTO = UDP] => Allow # Prio = 1 (High): [SA = ANY, DA = 10.2.0.1, SP = ANY, DP = 1002, PROTO = UDP] => Allow # Prio = 1 (High): [SA = ANY, DA = 10.3.0.1, SP = ANY, DP = 1003, PROTO = UDP] => Allow -p 1 firewall add default 1 #SINK0 +p 2 firewall add default 1 #SINK0 p 2 firewall add priority 1 ipv4 0.0.0.0 0 10.0.0.1 32 0 65535 1000 1000 17 0xF port 0 p 2 firewall add priority 1 ipv4 0.0.0.0 0 10.1.0.1 32 0 65535 1001 1001 17 0xF port 0 p 2 firewall add priority 1 ipv4 0.0.0.0 0 10.2.0.1 32 0 65535 1002 1002 17 0xF port 0 @@ -72,8 +72,8 @@ p 2 firewall add priority 1 ipv4 0.0.0.0 0 10.3.0.1 32 0 65535 1003 1003 17 0xF # TCP [SA = 100.2.0.10, DA = 10.2.0.1, SP = 1002, DP = 80] => socket ID = 2 # TCP [SA = 100.3.0.10, DA = 10.3.0.1, SP = 1003, DP = 80] => socket ID = 3 p 3 flow add default 1 #SINK1 -p 3 flow add ipv4 100.0.0.10 10.0.0.1 1000 80 6 port 1 id 0 -p 3 flow add ipv4 100.1.0.10 10.1.0.1 1001 80 6 port 1 id 1 -p 3 flow add ipv4 100.2.0.10 10.2.0.1 1002 80 6 port 1 id 2 -p 3 flow add ipv4 100.3.0.10 10.3.0.1 1003 80 6 port 1 id 3 +p 3 flow add ipv4 100.0.0.10 10.0.0.1 1000 80 6 port 0 id 0 +p 3 flow add ipv4 100.1.0.10 10.1.0.1 1001 80 6 port 0 id 1 +p 3 flow add ipv4 100.2.0.10 10.2.0.1 1002 80 6 port 0 id 2 +p 3 flow add ipv4 100.3.0.10 10.3.0.1 1003 80 6 port 0 id 3 #p 3 flow ls -- 2.5.5