From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wei Dai Subject: [PATCH 0/2] Fix 2 bugs of i40e VF interrupt found in l3fwd-power Date: Thu, 2 Nov 2017 21:10:54 +0800 Message-ID: <1509628256-16300-1-git-send-email-wei.dai@intel.com> Cc: dev@dpdk.org, Wei Dai To: jingjing.wu@intel.com, beilei.xing@intel.com, cunming.liang@intel.com Return-path: Received: from mga02.intel.com (mga02.intel.com [134.134.136.20]) by dpdk.org (Postfix) with ESMTP id 1ADCB1B3AF for ; Thu, 2 Nov 2017 14:25:15 +0100 (CET) List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" These 2 bugs can be observed from example/l3fwd-power run with i40e VF bound to VFIO-PCI. The test steps are as follows: 1. Disable LSC interrupt by clearing port_conf.intr_conf.lsc=0, as i40e VF doesn't support LSC interrupt to avoid rte_eth_dev_configure() failure. 2. Create a VF from i40e host PF. Let PF run with kernel driver and bind its VF to VFIO-PCI 3. Run l3fwd-power like: l3fwd-power -l 18-19 -- -p 0x1 --config='(0,0,19)' Then, the following error message appears like: EAL: Error enabling MSI-X interrupts for fd 18 This error is from rte_intr_enable( )/vfio_enable_msix( ) when enabling Rx queue interrupt. Same as the patch 06938770186a ("net/ixgbe: fix VFIO interrupt mapping in VF"), to change VFIO MSI-X interrupts mapping, previous mapping should be cleared first to avoid above error. After fixing above VFIO-PCI MSI-X interrupt mapping. There is still the following 2nd bug: l3fwd-power still can not be waked up by incoming packets. Same as the patch ca9d6597184b ("net/ixgbe: fix Rx queue interrupt mapping in VF"), the interrupt vector of Rx queues should be mapped to vector 1 to fix above 2nd bug. Signed-off-by: Wei Dai Wei Dai (2): net/i40e: fix VFIO interrupt mapping in VF net/i40e: fix Rx queue interrupt mapping in VF drivers/net/i40e/i40e_ethdev_vf.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) -- 2.7.5