From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dekel Peled Subject: [PATCH] doc: fix typos in mlx5 doc Date: Sun, 31 Mar 2019 13:12:09 +0300 Message-ID: <1554027129-25411-1-git-send-email-dekelp@mellanox.com> Cc: dev@dpdk.org, orika@mellanox.com, stable@dpdk.org To: yskoh@mellanox.com, shahafs@mellanox.com Return-path: Received: from mellanox.co.il (mail-il-dmz.mellanox.com [193.47.165.129]) by dpdk.org (Postfix) with ESMTP id 46D8A11A4 for ; Sun, 31 Mar 2019 12:15:28 +0200 (CEST) List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" Correct typing mistakes: appiled ==> applied tarffic ==> traffic Fixes: 0280f2812284 ("doc: add mlx5 E-Switch VXLAN tunnels limitations") Cc: stable@dpdk.org Signed-off-by: Dekel Peled --- doc/guides/nics/mlx5.rst | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst index 0200373..f4db921 100644 --- a/doc/guides/nics/mlx5.rst +++ b/doc/guides/nics/mlx5.rst @@ -149,7 +149,7 @@ Limitations - E-Switch VXLAN decapsulation Flow: - - can be appiled to PF port only. + - can be applied to PF port only. - must specify VF port action (packet redirection from PF to VF). - must specify tunnel outer UDP local (destination) port, wildcards not allowed. - must specify tunnel outer VNI, wildcards not allowed. @@ -319,7 +319,7 @@ Run-time configuration buffers per a packet, one large buffer is posted in order to receive multiple packets on the buffer. A MPRQ buffer consists of multiple fixed-size strides and each stride receives one packet. MPRQ can improve throughput for - small-packet tarffic. + small-packet traffic. When MPRQ is enabled, max_rx_pkt_len can be larger than the size of user-provided mbuf even if DEV_RX_OFFLOAD_SCATTER isn't enabled. PMD will @@ -330,7 +330,7 @@ Run-time configuration - ``mprq_log_stride_num`` parameter [int] Log 2 of the number of strides for Multi-Packet Rx queue. Configuring more - strides can reduce PCIe tarffic further. If configured value is not in the + strides can reduce PCIe traffic further. If configured value is not in the range of device capability, the default value will be set with a warning message. The default value is 4 which is 16 strides per a buffer, valid only if ``mprq_en`` is set. -- 1.8.3.1