segmented recv ixgbevf

segmented recv ixgbevf

[Alex Markuze]

Hi,
I'm seeing an unwanted behaviour in the receive flow of ixgbevf. While
using Jumbo frames and sending 4k+ bytes , the receive side breaks up the
packets into 2K buffers, and I receive 3 mbuffs per packet.

Im setting the .max_rx_pkt_len to 4.5K and the mempoll has 5K sized
elements?

Anything else I'm missing here. The purpose is to have all 4k+ bytes in one
single continuous buffer.

Thanks
Alex.

Re: segmented recv ixgbevf

[Bruce Richardson]

On Thu, Oct 30, 2014 at 12:23:09PM +0200, Alex Markuze wrote:
> Hi,
> I'm seeing an unwanted behaviour in the receive flow of ixgbevf. While
> using Jumbo frames and sending 4k+ bytes , the receive side breaks up the
> packets into 2K buffers, and I receive 3 mbuffs per packet.
> 
> Im setting the .max_rx_pkt_len to 4.5K and the mempoll has 5K sized
> elements?
> 
> Anything else I'm missing here. The purpose is to have all 4k+ bytes in one
> single continuous buffer.
>

That should be working, I think. 
Does it work with the plain ixgbe driver on the host? 
Is there anything in the output of the driver initialization saying something like "forcing scatter mode"?

Re: segmented recv ixgbevf

[Alex Markuze]

For posterity.

1.When using MTU larger then 2K its advised to provide the value
to rte_pktmbuf_pool_init.
2.ixgbevf rounds down the ("MBUF size" - RTE_PKTMBUF_HEADROOM) to the
nearest 1K multiple when deciding on the receiving capabilities [buffer
size]of the Buffers in the pool.
The function SRRCTL register,  is considered here for some reason?

Re: segmented recv ixgbevf

[Bruce Richardson]

On Thu, Oct 30, 2014 at 02:48:42PM +0200, Alex Markuze wrote:
> For posterity.
> 
> 1.When using MTU larger then 2K its advised to provide the value
> to rte_pktmbuf_pool_init.
> 2.ixgbevf rounds down the ("MBUF size" - RTE_PKTMBUF_HEADROOM) to the
> nearest 1K multiple when deciding on the receiving capabilities [buffer
> size]of the Buffers in the pool.
> The function SRRCTL register,  is considered here for some reason?

So problem is now solved, right?

Re: segmented recv ixgbevf

[Matt Laswell]

Hey Folks,

I ran into the same issue that Alex is describing here, and I wanted to
expand just a little bit on his comments, as the documentation isn't very
clear.

Per the documentation, the two arguments to rte_pktmbuf_pool_init() are a
pointer to the memory pool that contains the newly-allocated mbufs and an
opaque pointer.  The docs are pretty vague about what the opaque pointer
should point to or what it's contents mean; all of the examples I looked at
just pass a NULL pointer. The docs for this function describe the opaque
pointer this way:

"A pointer that can be used by the user to retrieve useful information for
mbuf initialization. This pointer comes from the init_arg parameter of
rte_mempool_create()
<http://www.dpdk.org/doc/api/rte__mempool_8h.html#a7dc1d01a45144e3203c36d1800cb8f17>
."

This is a little bit misleading.  Under the covers, rte_pktmbuf_pool_init()
doesn't threat the opaque pointer as a pointer at all.  Rather, it just
converts it to a uint16_t which contains the desired mbuf size.   If it
receives 0 (in other words, if you passed in a NULL pointer), it will use
2048 bytes + RTE_PKTMBUF_HEADROOM.  Hence, incoming jumbo frames will be
segmented into 2K chunks.

Any chance we could get an improvement to the documentation about this
parameter?  It seems as though the opaque pointer isn't a pointer and
probably shouldn't be opaque.

Hope this helps the next person who comes across this behavior.

--
Matt Laswell
infinite io, inc.

On Thu, Oct 30, 2014 at 7:48 AM, Alex Markuze <alex-I7wstvAgZDk@public.gmane.org> wrote:

> For posterity.
>
> 1.When using MTU larger then 2K its advised to provide the value
> to rte_pktmbuf_pool_init.
> 2.ixgbevf rounds down the ("MBUF size" - RTE_PKTMBUF_HEADROOM) to the
> nearest 1K multiple when deciding on the receiving capabilities [buffer
> size]of the Buffers in the pool.
> The function SRRCTL register,  is considered here for some reason?
>