From mboxrd@z Thu Jan 1 00:00:00 1970 From: Adrien Mazarguil Subject: Re: mellanox connectx-2 support Date: Mon, 21 May 2018 11:15:10 +0200 Message-ID: <20180521091510.GQ6497@6wind.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit Cc: olgas@mellanox.com, dev@dpdk.org To: Vasiliy Tolstov Return-path: Received: from mail-wm0-f54.google.com (mail-wm0-f54.google.com [74.125.82.54]) by dpdk.org (Postfix) with ESMTP id 20C7FAAC6 for ; Mon, 21 May 2018 11:15:26 +0200 (CEST) Received: by mail-wm0-f54.google.com with SMTP id x12-v6so11290587wmc.0 for ; Mon, 21 May 2018 02:15:26 -0700 (PDT) Content-Disposition: inline In-Reply-To: List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" On Sun, May 20, 2018 at 10:25:01PM +0300, Vasiliy Tolstov wrote: > чт, 17 мая 2018 г. в 9:02, Olga Shern : > > > Vasily, > > > > ConnectX-2 is very, very old card. > > We don't support it. > > You can run DPDK on ConnectX-3 Pro, ConnectX-4 /LX and ConnectX-5 NICs. > > The best performance and better feature set you will get with ConnectX-5 > > > > Best Regards, > > > > Thanks for info, web page says about connect-x3 (without pro) If i have > Connect-X3 vpi does it works with intel dpdk mellanox driver? Probably, provided both an up-to-date firmware version and that ports accept Ethernet mode configuration [1]. [1] http://dpdk.org/doc/guides/nics/mlx4.html#quick-start-guide -- Adrien Mazarguil 6WIND