dev.dpdk.org archive mirror
 help / color / mirror / Atom feed
From: Stephen Hemminger <stephen@networkplumber.org>
To: Konstantin Ananyev <konstantin.ananyev@huawei.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [RFC 0/8] ioring: network driver
Date: Wed, 11 Dec 2024 07:03:52 -0800	[thread overview]
Message-ID: <20241211070352.6d32e332@hermes.local> (raw)
In-Reply-To: <e8f7bbc6c8684cc9baafbb1a355e1b4c@huawei.com>

On Wed, 11 Dec 2024 11:34:39 +0000
Konstantin Ananyev <konstantin.ananyev@huawei.com> wrote:

> > This is first draft of new simplified TAP device that uses
> > the Linux kernel ioring API to provide a read/write ring
> > with kernel.
> > 
> > This is split from tap device because there are so many
> > unnecessary things in existing tap, and supporting ioring is
> > better without ifdefs etc. The default name of the tap
> > device is different that other uses in DPDK but the driver
> > tries to keep the same relevant devargs as before.
> > 
> > This driver will only provide features that match what kernel
> > does, so no flow support etc. The next version will add checksum
> > and multi-segment packets. Some of the doc files may need update
> > as well.  
> 
> Makes sense to me, though didn't properly look inside.
> One thing - probably add  a 'tap' into the name,
> 'tap_ioiring' or so, otherwise 'ioring' is a bit too generic 
> and might be confusing.

There are some userspaces that look for "e*" in name for some setups.
But names are totally abitrary

  reply	other threads:[~2024-12-11 15:03 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-12-10 21:23 [RFC 0/8] ioring: network driver Stephen Hemminger
2024-12-10 21:23 ` [RFC 1/8] net/ioring: introduce new driver Stephen Hemminger
2024-12-10 21:23 ` [RFC 2/8] net/ioring: implement link state Stephen Hemminger
2024-12-10 21:23 ` [RFC 3/8] net/ioring: implement control functions Stephen Hemminger
2024-12-10 21:23 ` [RFC 4/8] net/ioring: implement management functions Stephen Hemminger
2024-12-10 21:23 ` [RFC 5/8] net/ioring: implement primary secondary fd passing Stephen Hemminger
2024-12-10 21:23 ` [RFC 6/8] net/ioring: implement receive and transmit Stephen Hemminger
2024-12-10 21:23 ` [RFC 7/8] net/ioring: add VLAN support Stephen Hemminger
2024-12-10 21:23 ` [RFC 8/8] net/ioring: implement statistics Stephen Hemminger
2024-12-11 11:34 ` [RFC 0/8] ioring: network driver Konstantin Ananyev
2024-12-11 15:03   ` Stephen Hemminger [this message]
2024-12-12 19:06     ` Konstantin Ananyev
2024-12-19 15:40       ` Morten Brørup
2024-12-20 14:34         ` Konstantin Ananyev
2024-12-20 16:19           ` Stephen Hemminger
2024-12-11 16:28 ` [PATCH v2 " Stephen Hemminger
2024-12-11 16:28   ` [PATCH v2 1/8] net/ioring: introduce new driver Stephen Hemminger
2024-12-28 16:39     ` Morten Brørup
2024-12-11 16:28   ` [PATCH v2 2/8] net/ioring: implement link state Stephen Hemminger
2024-12-11 16:28   ` [PATCH v2 3/8] net/ioring: implement control functions Stephen Hemminger
2024-12-11 16:28   ` [PATCH v2 4/8] net/ioring: implement management functions Stephen Hemminger
2024-12-11 16:28   ` [PATCH v2 5/8] net/ioring: implement primary secondary fd passing Stephen Hemminger
2024-12-11 16:28   ` [PATCH v2 6/8] net/ioring: implement receive and transmit Stephen Hemminger
2024-12-11 16:28   ` [PATCH v2 7/8] net/ioring: add VLAN support Stephen Hemminger
2024-12-11 16:28   ` [PATCH v2 8/8] net/ioring: implement statistics Stephen Hemminger
2025-03-11 23:51 ` [PATCH v3 0/9] ioring PMD device Stephen Hemminger
2025-03-11 23:51   ` [PATCH v3 1/9] net/ioring: introduce new driver Stephen Hemminger
2025-03-11 23:51   ` [PATCH v3 2/9] net/ioring: implement link state Stephen Hemminger
2025-03-11 23:51   ` [PATCH v3 3/9] net/ioring: implement control functions Stephen Hemminger
2025-03-11 23:51   ` [PATCH v3 4/9] net/ioring: implement management functions Stephen Hemminger
2025-03-11 23:51   ` [PATCH v3 5/9] net/ioring: implement secondary process support Stephen Hemminger
2025-03-11 23:51   ` [PATCH v3 6/9] net/ioring: implement receive and transmit Stephen Hemminger
2025-03-11 23:51   ` [PATCH v3 7/9] net/ioring: add VLAN support Stephen Hemminger
2025-03-11 23:51   ` [PATCH v3 8/9] net/ioring: implement statistics Stephen Hemminger
2025-03-11 23:51   ` [PATCH v3 9/9] net/ioring: support multi-segment Rx and Tx Stephen Hemminger
2025-03-13 21:50 ` [PATCH v4 00/10] new ioring PMD Stephen Hemminger
2025-03-13 21:50   ` [PATCH v4 01/10] net/ioring: introduce new driver Stephen Hemminger
2025-03-13 21:50   ` [PATCH v4 02/10] net/ioring: implement link state Stephen Hemminger
2025-03-13 21:50   ` [PATCH v4 03/10] net/ioring: implement control functions Stephen Hemminger
2025-03-13 21:50   ` [PATCH v4 04/10] net/ioring: implement management functions Stephen Hemminger
2025-03-13 21:50   ` [PATCH v4 05/10] net/ioring: implement secondary process support Stephen Hemminger
2025-03-13 21:50   ` [PATCH v4 06/10] net/ioring: implement receive and transmit Stephen Hemminger
2025-03-13 21:50   ` [PATCH v4 07/10] net/ioring: implement statistics Stephen Hemminger
2025-03-13 21:50   ` [PATCH v4 08/10] net/ioring: support multi-segment Rx and Tx Stephen Hemminger
2025-03-13 21:51   ` [PATCH v4 09/10] net/ioring: support Tx checksum and segment offload Stephen Hemminger
2025-03-13 21:51   ` [PATCH v4 10/10] net/ioring: add support for Rx offload Stephen Hemminger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241211070352.6d32e332@hermes.local \
    --to=stephen@networkplumber.org \
    --cc=dev@dpdk.org \
    --cc=konstantin.ananyev@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).