* [PATCH] crypto/openssl: Add support for SHA3 algorithms
@ 2026-01-06 13:09 Emma Finn
0 siblings, 0 replies; 3+ messages in thread
From: Emma Finn @ 2026-01-06 13:09 UTC (permalink / raw)
To: Kai Ji; +Cc: dev, Emma Finn
openssl 3.X supports SHA3. Hence adding SHA3-224, SHA3-256,
SHA3-384 and SHA3-512 support to the PMD.
Signed-off-by: Emma Finn <emma.finn@intel.com>
---
drivers/crypto/openssl/rte_openssl_pmd.c | 36 ++++
drivers/crypto/openssl/rte_openssl_pmd_ops.c | 168 +++++++++++++++++++
2 files changed, 204 insertions(+)
diff --git a/drivers/crypto/openssl/rte_openssl_pmd.c b/drivers/crypto/openssl/rte_openssl_pmd.c
index 4f171f48cc..8817d7893c 100644
--- a/drivers/crypto/openssl/rte_openssl_pmd.c
+++ b/drivers/crypto/openssl/rte_openssl_pmd.c
@@ -92,6 +92,14 @@ digest_name_get(enum rte_crypto_auth_algorithm algo)
return OSSL_DIGEST_NAME_SHA2_384;
case RTE_CRYPTO_AUTH_SHA512_HMAC:
return OSSL_DIGEST_NAME_SHA2_512;
+ case RTE_CRYPTO_AUTH_SHA3_224_HMAC:
+ return OSSL_DIGEST_NAME_SHA3_224;
+ case RTE_CRYPTO_AUTH_SHA3_256_HMAC:
+ return OSSL_DIGEST_NAME_SHA3_256;
+ case RTE_CRYPTO_AUTH_SHA3_384_HMAC:
+ return OSSL_DIGEST_NAME_SHA3_384;
+ case RTE_CRYPTO_AUTH_SHA3_512_HMAC:
+ return OSSL_DIGEST_NAME_SHA3_512;
default:
return NULL;
}
@@ -270,6 +278,22 @@ get_auth_algo(enum rte_crypto_auth_algorithm sessalgo,
case RTE_CRYPTO_AUTH_SHA512_HMAC:
*algo = EVP_sha512();
break;
+ case RTE_CRYPTO_AUTH_SHA3_224:
+ case RTE_CRYPTO_AUTH_SHA3_224_HMAC:
+ *algo = EVP_sha3_224();
+ break;
+ case RTE_CRYPTO_AUTH_SHA3_256:
+ case RTE_CRYPTO_AUTH_SHA3_256_HMAC:
+ *algo = EVP_sha3_256();
+ break;
+ case RTE_CRYPTO_AUTH_SHA3_384:
+ case RTE_CRYPTO_AUTH_SHA3_384_HMAC:
+ *algo = EVP_sha3_384();
+ break;
+ case RTE_CRYPTO_AUTH_SHA3_512:
+ case RTE_CRYPTO_AUTH_SHA3_512_HMAC:
+ *algo = EVP_sha3_512();
+ break;
default:
res = -EINVAL;
break;
@@ -659,6 +683,10 @@ openssl_set_session_auth_parameters(struct openssl_session *sess,
case RTE_CRYPTO_AUTH_SHA256:
case RTE_CRYPTO_AUTH_SHA384:
case RTE_CRYPTO_AUTH_SHA512:
+ case RTE_CRYPTO_AUTH_SHA3_224:
+ case RTE_CRYPTO_AUTH_SHA3_256:
+ case RTE_CRYPTO_AUTH_SHA3_384:
+ case RTE_CRYPTO_AUTH_SHA3_512:
sess->auth.mode = OPENSSL_AUTH_AS_AUTH;
if (get_auth_algo(xform->auth.algo,
&sess->auth.auth.evp_algo) != 0)
@@ -714,6 +742,10 @@ openssl_set_session_auth_parameters(struct openssl_session *sess,
case RTE_CRYPTO_AUTH_SHA256_HMAC:
case RTE_CRYPTO_AUTH_SHA384_HMAC:
case RTE_CRYPTO_AUTH_SHA512_HMAC:
+ case RTE_CRYPTO_AUTH_SHA3_224_HMAC:
+ case RTE_CRYPTO_AUTH_SHA3_256_HMAC:
+ case RTE_CRYPTO_AUTH_SHA3_384_HMAC:
+ case RTE_CRYPTO_AUTH_SHA3_512_HMAC:
sess->auth.mode = OPENSSL_AUTH_AS_HMAC;
algo = digest_name_get(xform->auth.algo);
@@ -744,6 +776,10 @@ openssl_set_session_auth_parameters(struct openssl_session *sess,
case RTE_CRYPTO_AUTH_SHA256_HMAC:
case RTE_CRYPTO_AUTH_SHA384_HMAC:
case RTE_CRYPTO_AUTH_SHA512_HMAC:
+ case RTE_CRYPTO_AUTH_SHA3_224_HMAC:
+ case RTE_CRYPTO_AUTH_SHA3_256_HMAC:
+ case RTE_CRYPTO_AUTH_SHA3_384_HMAC:
+ case RTE_CRYPTO_AUTH_SHA3_512_HMAC:
sess->auth.mode = OPENSSL_AUTH_AS_HMAC;
sess->auth.hmac.ctx = HMAC_CTX_new();
if (get_auth_algo(xform->auth.algo,
diff --git a/drivers/crypto/openssl/rte_openssl_pmd_ops.c b/drivers/crypto/openssl/rte_openssl_pmd_ops.c
index 5095e6cbea..8d6ae346a8 100644
--- a/drivers/crypto/openssl/rte_openssl_pmd_ops.c
+++ b/drivers/crypto/openssl/rte_openssl_pmd_ops.c
@@ -269,6 +269,174 @@ static const struct rte_cryptodev_capabilities openssl_pmd_capabilities[] = {
}, }
}, }
},
+ { /* SHA3_224 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA3_224_HMAC,
+ .block_size = 144,
+ .key_size = {
+ .min = 1,
+ .max = 144,
+ .increment = 1
+ },
+ .digest_size = {
+ .min = 1,
+ .max = 28,
+ .increment = 1
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA3_224 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA3_224,
+ .block_size = 144,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 28,
+ .max = 28,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA3_256 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA3_256_HMAC,
+ .block_size = 136,
+ .key_size = {
+ .min = 1,
+ .max = 136,
+ .increment = 1
+ },
+ .digest_size = {
+ .min = 1,
+ .max = 32,
+ .increment = 1
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA3_256 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA3_256,
+ .block_size = 136,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 32,
+ .max = 32,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA3_384 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA3_384_HMAC,
+ .block_size = 104,
+ .key_size = {
+ .min = 1,
+ .max = 104,
+ .increment = 1
+ },
+ .digest_size = {
+ .min = 1,
+ .max = 48,
+ .increment = 1
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA3_384 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA3_384,
+ .block_size = 104,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 48,
+ .max = 48,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA3_512 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA3_512_HMAC,
+ .block_size = 72,
+ .key_size = {
+ .min = 1,
+ .max = 72,
+ .increment = 1
+ },
+ .digest_size = {
+ .min = 1,
+ .max = 64,
+ .increment = 1
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA3_512 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA3_512,
+ .block_size = 72,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
{ /* AES CBC */
.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
{.sym = {
--
2.43.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH] crypto/openssl: Add support for SHA3 algorithms
@ 2026-01-08 13:08 Emma Finn
2026-01-23 16:36 ` Ji, Kai
0 siblings, 1 reply; 3+ messages in thread
From: Emma Finn @ 2026-01-08 13:08 UTC (permalink / raw)
To: Kai Ji; +Cc: dev, Emma Finn
Add SHA3-224, SHA3-256, SHA3-384, and SHA3-512
support to the OpenSSL PMD, including both hash
and HMAC variants.
Signed-off-by: Emma Finn <emma.finn@intel.com>
---
drivers/crypto/openssl/rte_openssl_pmd.c | 36 ++++
drivers/crypto/openssl/rte_openssl_pmd_ops.c | 168 +++++++++++++++++++
2 files changed, 204 insertions(+)
diff --git a/drivers/crypto/openssl/rte_openssl_pmd.c b/drivers/crypto/openssl/rte_openssl_pmd.c
index 4f171f48cc..8817d7893c 100644
--- a/drivers/crypto/openssl/rte_openssl_pmd.c
+++ b/drivers/crypto/openssl/rte_openssl_pmd.c
@@ -92,6 +92,14 @@ digest_name_get(enum rte_crypto_auth_algorithm algo)
return OSSL_DIGEST_NAME_SHA2_384;
case RTE_CRYPTO_AUTH_SHA512_HMAC:
return OSSL_DIGEST_NAME_SHA2_512;
+ case RTE_CRYPTO_AUTH_SHA3_224_HMAC:
+ return OSSL_DIGEST_NAME_SHA3_224;
+ case RTE_CRYPTO_AUTH_SHA3_256_HMAC:
+ return OSSL_DIGEST_NAME_SHA3_256;
+ case RTE_CRYPTO_AUTH_SHA3_384_HMAC:
+ return OSSL_DIGEST_NAME_SHA3_384;
+ case RTE_CRYPTO_AUTH_SHA3_512_HMAC:
+ return OSSL_DIGEST_NAME_SHA3_512;
default:
return NULL;
}
@@ -270,6 +278,22 @@ get_auth_algo(enum rte_crypto_auth_algorithm sessalgo,
case RTE_CRYPTO_AUTH_SHA512_HMAC:
*algo = EVP_sha512();
break;
+ case RTE_CRYPTO_AUTH_SHA3_224:
+ case RTE_CRYPTO_AUTH_SHA3_224_HMAC:
+ *algo = EVP_sha3_224();
+ break;
+ case RTE_CRYPTO_AUTH_SHA3_256:
+ case RTE_CRYPTO_AUTH_SHA3_256_HMAC:
+ *algo = EVP_sha3_256();
+ break;
+ case RTE_CRYPTO_AUTH_SHA3_384:
+ case RTE_CRYPTO_AUTH_SHA3_384_HMAC:
+ *algo = EVP_sha3_384();
+ break;
+ case RTE_CRYPTO_AUTH_SHA3_512:
+ case RTE_CRYPTO_AUTH_SHA3_512_HMAC:
+ *algo = EVP_sha3_512();
+ break;
default:
res = -EINVAL;
break;
@@ -659,6 +683,10 @@ openssl_set_session_auth_parameters(struct openssl_session *sess,
case RTE_CRYPTO_AUTH_SHA256:
case RTE_CRYPTO_AUTH_SHA384:
case RTE_CRYPTO_AUTH_SHA512:
+ case RTE_CRYPTO_AUTH_SHA3_224:
+ case RTE_CRYPTO_AUTH_SHA3_256:
+ case RTE_CRYPTO_AUTH_SHA3_384:
+ case RTE_CRYPTO_AUTH_SHA3_512:
sess->auth.mode = OPENSSL_AUTH_AS_AUTH;
if (get_auth_algo(xform->auth.algo,
&sess->auth.auth.evp_algo) != 0)
@@ -714,6 +742,10 @@ openssl_set_session_auth_parameters(struct openssl_session *sess,
case RTE_CRYPTO_AUTH_SHA256_HMAC:
case RTE_CRYPTO_AUTH_SHA384_HMAC:
case RTE_CRYPTO_AUTH_SHA512_HMAC:
+ case RTE_CRYPTO_AUTH_SHA3_224_HMAC:
+ case RTE_CRYPTO_AUTH_SHA3_256_HMAC:
+ case RTE_CRYPTO_AUTH_SHA3_384_HMAC:
+ case RTE_CRYPTO_AUTH_SHA3_512_HMAC:
sess->auth.mode = OPENSSL_AUTH_AS_HMAC;
algo = digest_name_get(xform->auth.algo);
@@ -744,6 +776,10 @@ openssl_set_session_auth_parameters(struct openssl_session *sess,
case RTE_CRYPTO_AUTH_SHA256_HMAC:
case RTE_CRYPTO_AUTH_SHA384_HMAC:
case RTE_CRYPTO_AUTH_SHA512_HMAC:
+ case RTE_CRYPTO_AUTH_SHA3_224_HMAC:
+ case RTE_CRYPTO_AUTH_SHA3_256_HMAC:
+ case RTE_CRYPTO_AUTH_SHA3_384_HMAC:
+ case RTE_CRYPTO_AUTH_SHA3_512_HMAC:
sess->auth.mode = OPENSSL_AUTH_AS_HMAC;
sess->auth.hmac.ctx = HMAC_CTX_new();
if (get_auth_algo(xform->auth.algo,
diff --git a/drivers/crypto/openssl/rte_openssl_pmd_ops.c b/drivers/crypto/openssl/rte_openssl_pmd_ops.c
index 5095e6cbea..8d6ae346a8 100644
--- a/drivers/crypto/openssl/rte_openssl_pmd_ops.c
+++ b/drivers/crypto/openssl/rte_openssl_pmd_ops.c
@@ -269,6 +269,174 @@ static const struct rte_cryptodev_capabilities openssl_pmd_capabilities[] = {
}, }
}, }
},
+ { /* SHA3_224 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA3_224_HMAC,
+ .block_size = 144,
+ .key_size = {
+ .min = 1,
+ .max = 144,
+ .increment = 1
+ },
+ .digest_size = {
+ .min = 1,
+ .max = 28,
+ .increment = 1
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA3_224 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA3_224,
+ .block_size = 144,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 28,
+ .max = 28,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA3_256 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA3_256_HMAC,
+ .block_size = 136,
+ .key_size = {
+ .min = 1,
+ .max = 136,
+ .increment = 1
+ },
+ .digest_size = {
+ .min = 1,
+ .max = 32,
+ .increment = 1
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA3_256 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA3_256,
+ .block_size = 136,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 32,
+ .max = 32,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA3_384 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA3_384_HMAC,
+ .block_size = 104,
+ .key_size = {
+ .min = 1,
+ .max = 104,
+ .increment = 1
+ },
+ .digest_size = {
+ .min = 1,
+ .max = 48,
+ .increment = 1
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA3_384 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA3_384,
+ .block_size = 104,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 48,
+ .max = 48,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA3_512 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA3_512_HMAC,
+ .block_size = 72,
+ .key_size = {
+ .min = 1,
+ .max = 72,
+ .increment = 1
+ },
+ .digest_size = {
+ .min = 1,
+ .max = 64,
+ .increment = 1
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA3_512 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA3_512,
+ .block_size = 72,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
{ /* AES CBC */
.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
{.sym = {
--
2.43.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] crypto/openssl: Add support for SHA3 algorithms
2026-01-08 13:08 Emma Finn
@ 2026-01-23 16:36 ` Ji, Kai
0 siblings, 0 replies; 3+ messages in thread
From: Ji, Kai @ 2026-01-23 16:36 UTC (permalink / raw)
To: Finn, Emma; +Cc: dev@dpdk.org
[-- Attachment #1: Type: text/plain, Size: 12335 bytes --]
Release notes doc/guides/rel_notes/ and PMD documentation need to updated for the new SHA3 algo
________________________________
From: Finn, Emma <emma.finn@intel.com>
Sent: 08 January 2026 13:08
To: Ji, Kai <kai.ji@intel.com>
Cc: dev@dpdk.org <dev@dpdk.org>; Finn, Emma <emma.finn@intel.com>
Subject: [PATCH] crypto/openssl: Add support for SHA3 algorithms
Add SHA3-224, SHA3-256, SHA3-384, and SHA3-512
support to the OpenSSL PMD, including both hash
and HMAC variants.
Signed-off-by: Emma Finn <emma.finn@intel.com>
---
drivers/crypto/openssl/rte_openssl_pmd.c | 36 ++++
drivers/crypto/openssl/rte_openssl_pmd_ops.c | 168 +++++++++++++++++++
2 files changed, 204 insertions(+)
diff --git a/drivers/crypto/openssl/rte_openssl_pmd.c b/drivers/crypto/openssl/rte_openssl_pmd.c
index 4f171f48cc..8817d7893c 100644
--- a/drivers/crypto/openssl/rte_openssl_pmd.c
+++ b/drivers/crypto/openssl/rte_openssl_pmd.c
@@ -92,6 +92,14 @@ digest_name_get(enum rte_crypto_auth_algorithm algo)
return OSSL_DIGEST_NAME_SHA2_384;
case RTE_CRYPTO_AUTH_SHA512_HMAC:
return OSSL_DIGEST_NAME_SHA2_512;
+ case RTE_CRYPTO_AUTH_SHA3_224_HMAC:
+ return OSSL_DIGEST_NAME_SHA3_224;
+ case RTE_CRYPTO_AUTH_SHA3_256_HMAC:
+ return OSSL_DIGEST_NAME_SHA3_256;
+ case RTE_CRYPTO_AUTH_SHA3_384_HMAC:
+ return OSSL_DIGEST_NAME_SHA3_384;
+ case RTE_CRYPTO_AUTH_SHA3_512_HMAC:
+ return OSSL_DIGEST_NAME_SHA3_512;
default:
return NULL;
}
@@ -270,6 +278,22 @@ get_auth_algo(enum rte_crypto_auth_algorithm sessalgo,
case RTE_CRYPTO_AUTH_SHA512_HMAC:
*algo = EVP_sha512();
break;
+ case RTE_CRYPTO_AUTH_SHA3_224:
+ case RTE_CRYPTO_AUTH_SHA3_224_HMAC:
+ *algo = EVP_sha3_224();
+ break;
+ case RTE_CRYPTO_AUTH_SHA3_256:
+ case RTE_CRYPTO_AUTH_SHA3_256_HMAC:
+ *algo = EVP_sha3_256();
+ break;
+ case RTE_CRYPTO_AUTH_SHA3_384:
+ case RTE_CRYPTO_AUTH_SHA3_384_HMAC:
+ *algo = EVP_sha3_384();
+ break;
+ case RTE_CRYPTO_AUTH_SHA3_512:
+ case RTE_CRYPTO_AUTH_SHA3_512_HMAC:
+ *algo = EVP_sha3_512();
+ break;
default:
res = -EINVAL;
break;
@@ -659,6 +683,10 @@ openssl_set_session_auth_parameters(struct openssl_session *sess,
case RTE_CRYPTO_AUTH_SHA256:
case RTE_CRYPTO_AUTH_SHA384:
case RTE_CRYPTO_AUTH_SHA512:
+ case RTE_CRYPTO_AUTH_SHA3_224:
+ case RTE_CRYPTO_AUTH_SHA3_256:
+ case RTE_CRYPTO_AUTH_SHA3_384:
+ case RTE_CRYPTO_AUTH_SHA3_512:
sess->auth.mode = OPENSSL_AUTH_AS_AUTH;
if (get_auth_algo(xform->auth.algo,
&sess->auth.auth.evp_algo) != 0)
@@ -714,6 +742,10 @@ openssl_set_session_auth_parameters(struct openssl_session *sess,
case RTE_CRYPTO_AUTH_SHA256_HMAC:
case RTE_CRYPTO_AUTH_SHA384_HMAC:
case RTE_CRYPTO_AUTH_SHA512_HMAC:
+ case RTE_CRYPTO_AUTH_SHA3_224_HMAC:
+ case RTE_CRYPTO_AUTH_SHA3_256_HMAC:
+ case RTE_CRYPTO_AUTH_SHA3_384_HMAC:
+ case RTE_CRYPTO_AUTH_SHA3_512_HMAC:
sess->auth.mode = OPENSSL_AUTH_AS_HMAC;
algo = digest_name_get(xform->auth.algo);
@@ -744,6 +776,10 @@ openssl_set_session_auth_parameters(struct openssl_session *sess,
case RTE_CRYPTO_AUTH_SHA256_HMAC:
case RTE_CRYPTO_AUTH_SHA384_HMAC:
case RTE_CRYPTO_AUTH_SHA512_HMAC:
+ case RTE_CRYPTO_AUTH_SHA3_224_HMAC:
+ case RTE_CRYPTO_AUTH_SHA3_256_HMAC:
+ case RTE_CRYPTO_AUTH_SHA3_384_HMAC:
+ case RTE_CRYPTO_AUTH_SHA3_512_HMAC:
sess->auth.mode = OPENSSL_AUTH_AS_HMAC;
sess->auth.hmac.ctx = HMAC_CTX_new();
if (get_auth_algo(xform->auth.algo,
diff --git a/drivers/crypto/openssl/rte_openssl_pmd_ops.c b/drivers/crypto/openssl/rte_openssl_pmd_ops.c
index 5095e6cbea..8d6ae346a8 100644
--- a/drivers/crypto/openssl/rte_openssl_pmd_ops.c
+++ b/drivers/crypto/openssl/rte_openssl_pmd_ops.c
@@ -269,6 +269,174 @@ static const struct rte_cryptodev_capabilities openssl_pmd_capabilities[] = {
}, }
}, }
},
+ { /* SHA3_224 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA3_224_HMAC,
+ .block_size = 144,
+ .key_size = {
+ .min = 1,
+ .max = 144,
+ .increment = 1
+ },
+ .digest_size = {
+ .min = 1,
+ .max = 28,
+ .increment = 1
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA3_224 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA3_224,
+ .block_size = 144,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 28,
+ .max = 28,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA3_256 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA3_256_HMAC,
+ .block_size = 136,
+ .key_size = {
+ .min = 1,
+ .max = 136,
+ .increment = 1
+ },
+ .digest_size = {
+ .min = 1,
+ .max = 32,
+ .increment = 1
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA3_256 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA3_256,
+ .block_size = 136,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 32,
+ .max = 32,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA3_384 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA3_384_HMAC,
+ .block_size = 104,
+ .key_size = {
+ .min = 1,
+ .max = 104,
+ .increment = 1
+ },
+ .digest_size = {
+ .min = 1,
+ .max = 48,
+ .increment = 1
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA3_384 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA3_384,
+ .block_size = 104,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 48,
+ .max = 48,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA3_512 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA3_512_HMAC,
+ .block_size = 72,
+ .key_size = {
+ .min = 1,
+ .max = 72,
+ .increment = 1
+ },
+ .digest_size = {
+ .min = 1,
+ .max = 64,
+ .increment = 1
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA3_512 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA3_512,
+ .block_size = 72,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
{ /* AES CBC */
.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
{.sym = {
--
2.43.0
[-- Attachment #2: Type: text/html, Size: 41545 bytes --]
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-01-23 16:36 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-01-06 13:09 [PATCH] crypto/openssl: Add support for SHA3 algorithms Emma Finn
-- strict thread matches above, loose matches on Subject: below --
2026-01-08 13:08 Emma Finn
2026-01-23 16:36 ` Ji, Kai
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox