public inbox for dev@dpdk.org
 help / color / mirror / Atom feed
From: Stephen Hemminger <stephen@networkplumber.org>
To: spinler@cesnet.cz
Cc: dev@dpdk.org
Subject: Re: [PATCH 1/8] net/nfb: prepare for indirect queue mapping scheme
Date: Fri, 16 Jan 2026 09:34:00 -0800	[thread overview]
Message-ID: <20260116093400.74fc31ed@phoenix.local> (raw)
In-Reply-To: <20260115151656.393106-2-spinler@cesnet.cz>

On Thu, 15 Jan 2026 16:16:49 +0100
spinler@cesnet.cz wrote:

> diff --git a/drivers/net/nfb/nfb.h b/drivers/net/nfb/nfb.h
> index d85c5fba62..ef41d100ac 100644
> --- a/drivers/net/nfb/nfb.h
> +++ b/drivers/net/nfb/nfb.h
> @@ -47,6 +47,10 @@ struct pmd_internals {
>  	uint16_t         max_txmac;
>  	struct nc_rxmac *rxmac[RTE_MAX_NC_RXMAC];
>  	struct nc_txmac *txmac[RTE_MAX_NC_TXMAC];
> +
> +	int             *queue_map_rx;
> +	int             *queue_map_tx;


Since these are queues, would prefer uint16_t rather than int.

> +
>  	struct nfb_device *nfb;
>  };
>  
> diff --git a/drivers/net/nfb/nfb_ethdev.c b/drivers/net/nfb/nfb_ethdev.c
> index 74728f91dd..247f78fe24 100644
> --- a/drivers/net/nfb/nfb_ethdev.c
> +++ b/drivers/net/nfb/nfb_ethdev.c
> @@ -510,6 +510,7 @@ static const struct eth_dev_ops ops = {
>  static int
>  nfb_eth_dev_init(struct rte_eth_dev *dev)
>  {
> +	int i;
>  	int ret;
>  	uint32_t mac_count;
>  	struct rte_eth_dev_data *data = dev->data;
> @@ -567,6 +568,23 @@ nfb_eth_dev_init(struct rte_eth_dev *dev)
>  	dev->rx_pkt_burst = nfb_eth_ndp_rx;
>  	dev->tx_pkt_burst = nfb_eth_ndp_tx;
>  
> +	internals->queue_map_rx = rte_malloc("NFB queue map",
> +			sizeof(*internals->queue_map_rx) *
> +			(priv->max_rx_queues + priv->max_tx_queues), 0);

Use rte_calloc() of arrays.
> +	if (internals->queue_map_rx == NULL) {

  reply	other threads:[~2026-01-16 17:34 UTC|newest]

Thread overview: 131+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-15 15:16 [PATCH 0/8] net/nfb: rework to real multiport spinler
2026-01-15 15:16 ` [PATCH 1/8] net/nfb: prepare for indirect queue mapping scheme spinler
2026-01-16 17:34   ` Stephen Hemminger [this message]
2026-01-20 15:16     ` Martin Spinler
2026-01-15 15:16 ` [PATCH 2/8] net/nfb: create ethdev for every eth port/channel spinler
2026-01-15 15:16 ` [PATCH 3/8] net/nfb: add vdev as alternative device probe method spinler
2026-01-15 15:16 ` [PATCH 4/8] net/nfb: add device argument "port" to limit used ports spinler
2026-01-16 17:36   ` Stephen Hemminger
2026-01-20 15:16     ` Martin Spinler
2026-01-16 17:36   ` Stephen Hemminger
2026-01-16 17:37   ` Stephen Hemminger
2026-01-15 15:16 ` [PATCH 5/8] net/nfb: init only MACs associated with device spinler
2026-01-15 15:16 ` [PATCH 6/8] net/nfb: add compatible cards to driver PCI ID table spinler
2026-01-15 15:16 ` [PATCH 7/8] net/nfb: report firmware version spinler
2026-01-15 15:16 ` [PATCH 8/8] doc/nfb: cleanup and update guide spinler
2026-01-16  5:50 ` [PATCH 0/8] net/nfb: rework to real multiport Stephen Hemminger
2026-01-16 16:44 ` [PATCH v2 " spinler
2026-01-16 16:44   ` [PATCH v2 1/8] net/nfb: prepare for indirect queue mapping scheme spinler
2026-01-16 16:44   ` [PATCH v2 2/8] net/nfb: create ethdev for every eth port/channel spinler
2026-01-16 16:44   ` [PATCH v2 3/8] net/nfb: add vdev as alternative device probe method spinler
2026-01-16 16:44   ` [PATCH v2 4/8] net/nfb: add device argument "port" to limit used ports spinler
2026-01-16 16:44   ` [PATCH v2 5/8] net/nfb: init only MACs associated with device spinler
2026-01-16 16:44   ` [PATCH v2 6/8] net/nfb: add compatible cards to driver PCI ID table spinler
2026-01-16 16:44   ` [PATCH v2 7/8] net/nfb: report firmware version spinler
2026-01-16 16:44   ` [PATCH v2 8/8] doc/nfb: cleanup and update guide spinler
2026-01-20  2:25   ` [PATCH v2 0/8] net/nfb: rework to real multiport Stephen Hemminger
2026-01-20 15:16     ` Martin Spinler
2026-01-21 17:03 ` [PATCH v3 " spinler
2026-01-21 17:03   ` [PATCH v3 1/8] net/nfb: prepare for indirect queue mapping scheme spinler
2026-01-21 17:03   ` [PATCH v3 2/8] net/nfb: create ethdev for every eth port/channel spinler
2026-01-21 17:03   ` [PATCH v3 3/8] net/nfb: add vdev as alternative device probe method spinler
2026-01-21 17:40     ` Stephen Hemminger
2026-01-21 17:03   ` [PATCH v3 4/8] net/nfb: add device argument "port" to limit used ports spinler
2026-01-21 17:03   ` [PATCH v3 5/8] net/nfb: init only MACs associated with device spinler
2026-01-21 17:03   ` [PATCH v3 6/8] net/nfb: add compatible cards to driver PCI ID table spinler
2026-01-21 17:03   ` [PATCH v3 7/8] net/nfb: report firmware version spinler
2026-01-21 17:03   ` [PATCH v3 8/8] doc/nfb: cleanup and update guide spinler
2026-01-21 17:41     ` Stephen Hemminger
2026-01-21 17:42   ` [PATCH v3 0/8] net/nfb: rework to real multiport Stephen Hemminger
2026-01-22  7:27 ` [PATCH v4 " spinler
2026-01-22  7:27   ` [PATCH v4 1/8] net/nfb: prepare for indirect queue mapping scheme spinler
2026-01-22  7:27   ` [PATCH v4 2/8] net/nfb: create ethdev for every eth port/channel spinler
2026-01-22  7:27   ` [PATCH v4 3/8] net/nfb: add vdev as alternative device probe method spinler
2026-01-22  7:27   ` [PATCH v4 4/8] net/nfb: add device argument "port" to limit used ports spinler
2026-01-22  7:27   ` [PATCH v4 5/8] net/nfb: init only MACs associated with device spinler
2026-01-22  7:27   ` [PATCH v4 6/8] net/nfb: add compatible cards to driver PCI ID table spinler
2026-01-22  7:27   ` [PATCH v4 7/8] net/nfb: report firmware version spinler
2026-01-22  7:27   ` [PATCH v4 8/8] doc/nfb: cleanup and update guide spinler
2026-01-23  1:00   ` [PATCH v4 0/8] net/nfb: rework to real multiport Stephen Hemminger
2026-01-23  1:01   ` Stephen Hemminger
2026-01-23  1:14   ` Stephen Hemminger
2026-01-23 17:34     ` Martin Spinler
2026-01-23 17:22 ` [PATCH v5 " spinler
2026-01-23 17:22   ` [PATCH v5 1/8] net/nfb: prepare for indirect queue mapping scheme spinler
2026-01-23 17:22   ` [PATCH v5 2/8] net/nfb: create one ethdev per ethernet port spinler
2026-01-27  0:37     ` Stephen Hemminger
2026-01-27  8:12       ` Martin Spinler
2026-01-27 14:09         ` Stephen Hemminger
2026-01-23 17:22   ` [PATCH v5 3/8] net/nfb: add vdev as alternative device probe method spinler
2026-01-23 17:22   ` [PATCH v5 4/8] net/nfb: add device argument "port" to limit used ports spinler
2026-01-23 17:22   ` [PATCH v5 5/8] net/nfb: init only MACs associated with device spinler
2026-01-23 17:22   ` [PATCH v5 6/8] net/nfb: add compatible cards to driver PCI ID table spinler
2026-01-23 17:22   ` [PATCH v5 7/8] net/nfb: report firmware version spinler
2026-01-23 17:22   ` [PATCH v5 8/8] doc/nfb: cleanup and update guide spinler
2026-01-24 19:10     ` [REVIEW] " Stephen Hemminger
2026-01-24 19:19   ` [PATCH v5 0/8] net/nfb: rework to real multiport Stephen Hemminger
2026-02-02 15:34 ` [PATCH v6 " spinler
2026-02-02 15:34   ` [PATCH v6 1/8] net/nfb: prepare for indirect queue mapping scheme spinler
2026-02-02 17:50     ` Stephen Hemminger
2026-02-02 15:34   ` [PATCH v6 2/8] net/nfb: create one ethdev per ethernet port spinler
2026-02-02 15:34   ` [PATCH v6 3/8] net/nfb: add vdev as alternative device probe method spinler
2026-02-02 15:34   ` [PATCH v6 4/8] net/nfb: add device argument "port" to limit used ports spinler
2026-02-02 15:34   ` [PATCH v6 5/8] net/nfb: init only MACs associated with device spinler
2026-02-02 15:34   ` [PATCH v6 6/8] net/nfb: add compatible cards to driver PCI ID table spinler
2026-02-02 15:34   ` [PATCH v6 7/8] net/nfb: report firmware version spinler
2026-02-02 15:34   ` [PATCH v6 8/8] doc/nfb: cleanup and update guide spinler
2026-02-02 17:42     ` [REVIEW] " Stephen Hemminger
2026-02-02 17:51       ` Stephen Hemminger
2026-02-02 17:52       ` Stephen Hemminger
2026-02-02 17:54       ` Stephen Hemminger
2026-02-02 17:54       ` Stephen Hemminger
2026-02-04 12:31 ` [PATCH v7 0/8] net/nfb: rework to real multiport spinler
2026-02-04 12:31   ` [PATCH v7 1/8] net/nfb: prepare for indirect queue mapping scheme spinler
2026-02-04 12:31   ` [PATCH v7 2/8] net/nfb: create one ethdev per ethernet port spinler
2026-02-04 12:31   ` [PATCH v7 3/8] net/nfb: add vdev as alternative device probe method spinler
2026-02-04 12:31   ` [PATCH v7 4/8] net/nfb: add device argument "port" to limit used ports spinler
2026-02-04 12:31   ` [PATCH v7 5/8] net/nfb: init only MACs associated with device spinler
2026-02-04 12:31   ` [PATCH v7 6/8] net/nfb: add compatible cards to driver PCI ID table spinler
2026-02-04 12:31   ` [PATCH v7 7/8] net/nfb: report firmware version spinler
2026-02-04 12:31   ` [PATCH v7 8/8] doc/nfb: cleanup and update guide spinler
2026-02-10  0:35   ` [PATCH v7 0/8] net/nfb: rework to real multiport Stephen Hemminger
2026-02-13 18:53     ` Martin Špinler
2026-02-12 18:35   ` Stephen Hemminger
2026-02-13 18:53     ` Martin Špinler
2026-02-13 18:53 ` [PATCH v8 " spinler
2026-02-13 18:53   ` [PATCH v8 1/8] net/nfb: prepare for indirect queue mapping scheme spinler
2026-02-13 18:53   ` [PATCH v8 2/8] net/nfb: create one ethdev per ethernet port spinler
2026-02-13 19:33     ` Stephen Hemminger
2026-02-13 18:53   ` [PATCH v8 3/8] net/nfb: add vdev as alternative device probe method spinler
2026-02-13 18:53   ` [PATCH v8 4/8] net/nfb: add device argument "port" to limit used ports spinler
2026-02-13 18:53   ` [PATCH v8 5/8] net/nfb: init only MACs associated with device spinler
2026-02-13 18:53   ` [PATCH v8 6/8] net/nfb: add compatible cards to driver PCI ID table spinler
2026-02-13 18:53   ` [PATCH v8 7/8] net/nfb: report firmware version spinler
2026-02-13 18:53   ` [PATCH v8 8/8] doc/nfb: cleanup and update guide spinler
2026-02-13 19:39   ` [PATCH v8 0/8] net/nfb: rework to real multiport Stephen Hemminger
2026-02-13 20:13     ` Martin Špinler
2026-02-16 16:24 ` [PATCH v9 " spinler
2026-02-16 16:24   ` [PATCH v9 1/8] net/nfb: prepare for indirect queue mapping scheme spinler
2026-02-16 16:25   ` [PATCH v9 2/8] net/nfb: create one ethdev per ethernet port spinler
2026-02-16 16:25   ` [PATCH v9 3/8] net/nfb: add vdev as alternative device probe method spinler
2026-02-16 16:25   ` [PATCH v9 4/8] net/nfb: add device argument "port" to limit used ports spinler
2026-02-16 16:25   ` [PATCH v9 5/8] net/nfb: init only MACs associated with device spinler
2026-02-16 16:25   ` [PATCH v9 6/8] net/nfb: add compatible cards to driver PCI ID table spinler
2026-02-16 16:25   ` [PATCH v9 7/8] net/nfb: report firmware version spinler
2026-02-16 16:25   ` [PATCH v9 8/8] doc/nfb: cleanup and update guide spinler
2026-02-16 22:11   ` [PATCH v9 0/8] net/nfb: rework to real multiport Stephen Hemminger
2026-02-17  7:09     ` Martin Spinler
2026-02-17  7:10 ` [PATCH v10 " spinler
2026-02-17  7:10   ` [PATCH v10 1/8] net/nfb: prepare for indirect queue mapping scheme spinler
2026-02-17  7:10   ` [PATCH v10 2/8] net/nfb: create one ethdev per ethernet port spinler
2026-02-17  7:10   ` [PATCH v10 3/8] net/nfb: add vdev as alternative device probe method spinler
2026-02-17  7:10   ` [PATCH v10 4/8] net/nfb: add device argument "port" to limit used ports spinler
2026-02-17  7:10   ` [PATCH v10 5/8] net/nfb: init only MACs associated with device spinler
2026-02-17  7:10   ` [PATCH v10 6/8] net/nfb: add compatible cards to driver PCI ID table spinler
2026-02-17  7:10   ` [PATCH v10 7/8] net/nfb: report firmware version spinler
2026-02-17  7:10   ` [PATCH v10 8/8] doc/nfb: cleanup and update guide spinler
2026-03-13 16:48     ` Thomas Monjalon
2026-02-17 14:58   ` [PATCH v10 0/8] net/nfb: rework to real multiport Stephen Hemminger
2026-02-17 15:05     ` Martin Spinler
2026-02-17 15:22       ` Martin Spinler
2026-02-19  0:12   ` Stephen Hemminger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260116093400.74fc31ed@phoenix.local \
    --to=stephen@networkplumber.org \
    --cc=dev@dpdk.org \
    --cc=spinler@cesnet.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox