public inbox for dev@dpdk.org
 help / color / mirror / Atom feed
From: spinler@cesnet.cz
To: dev@dpdk.org
Cc: Martin Spinler <spinler@cesnet.cz>
Subject: [PATCH 1/7] net/nfb: use MAC address assigned to card
Date: Fri,  6 Feb 2026 18:04:29 +0100	[thread overview]
Message-ID: <20260206170435.302184-2-spinler@cesnet.cz> (raw)
In-Reply-To: <20260206170435.302184-1-spinler@cesnet.cz>

From: Martin Spinler <spinler@cesnet.cz>

Check for a specific MAC address assigned to a card.
If there is no assigned MAC address, then use a random MAC as fallback.

Signed-off-by: Martin Spinler <spinler@cesnet.cz>
---
 drivers/net/nfb/nfb_ethdev.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/net/nfb/nfb_ethdev.c b/drivers/net/nfb/nfb_ethdev.c
index 157f04a891..ca3dbad879 100644
--- a/drivers/net/nfb/nfb_ethdev.c
+++ b/drivers/net/nfb/nfb_ethdev.c
@@ -11,6 +11,7 @@
 
 #include <nfb/nfb.h>
 #include <nfb/ndp.h>
+#include <netcope/eth.h>
 #include <netcope/rxmac.h>
 #include <netcope/txmac.h>
 
@@ -639,10 +640,14 @@ nfb_eth_dev_init(struct rte_eth_dev *dev, void *init_data)
 			goto err_malloc_mac_addrs;
 		}
 
-		rte_eth_random_addr(eth_addr_init.addr_bytes);
-		eth_addr_init.addr_bytes[0] = eth_addr.addr_bytes[0];
-		eth_addr_init.addr_bytes[1] = eth_addr.addr_bytes[1];
-		eth_addr_init.addr_bytes[2] = eth_addr.addr_bytes[2];
+		ret = nc_ifc_get_default_mac(internals->nfb, ifc->id, eth_addr_init.addr_bytes,
+			sizeof(eth_addr_init.addr_bytes));
+		if (ret != 0) {
+			rte_eth_random_addr(eth_addr_init.addr_bytes);
+			eth_addr_init.addr_bytes[0] = eth_addr.addr_bytes[0];
+			eth_addr_init.addr_bytes[1] = eth_addr.addr_bytes[1];
+			eth_addr_init.addr_bytes[2] = eth_addr.addr_bytes[2];
+		}
 
 		nfb_eth_mac_addr_set(dev, &eth_addr_init);
 		rte_ether_addr_copy(&eth_addr_init, &data->mac_addrs[0]);
-- 
2.53.0


  reply	other threads:[~2026-02-06 17:04 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-06 17:04 [PATCH 0/7] net/nfb: ethernet enhancements spinler
2026-02-06 17:04 ` spinler [this message]
2026-02-06 17:04 ` [PATCH 2/7] net/nfb: get correct link speed spinler
2026-02-06 17:04 ` [PATCH 3/7] net/nfb: support real link-up/down config spinler
2026-02-06 17:04 ` [PATCH 4/7] net/nfb: support setting RS-FEC mode spinler
2026-02-06 17:04 ` [PATCH 5/7] net/nfb: support setting Rx MTU spinler
2026-02-18 18:20   ` Stephen Hemminger
2026-02-19  6:20     ` Martin Spinler
2026-02-06 17:04 ` [PATCH 6/7] net/nfb: read total stats from macs spinler
2026-02-06 17:04 ` [PATCH 7/7] doc/nfb: update release notes for nfb driver spinler
2026-02-17  4:37   ` Stephen Hemminger
2026-02-10  0:33 ` [PATCH 0/7] net/nfb: ethernet enhancements Stephen Hemminger
2026-02-12 18:52 ` Stephen Hemminger
2026-02-17 11:03 ` [PATCH v2 0/6] " spinler
2026-02-17 11:03   ` [PATCH v2 1/6] net/nfb: use MAC address assigned to card spinler
2026-02-17 11:03   ` [PATCH v2 2/6] net/nfb: get correct link speed spinler
2026-02-17 11:03   ` [PATCH v2 3/6] net/nfb: support real link-up/down config spinler
2026-02-17 11:03   ` [PATCH v2 4/6] net/nfb: support setting RS-FEC mode spinler
2026-02-17 11:03   ` [PATCH v2 5/6] net/nfb: support setting Rx MTU spinler
2026-02-17 11:03   ` [PATCH v2 6/6] net/nfb: read total stats from macs spinler
2026-02-18 18:21   ` [PATCH v2 0/6] net/nfb: ethernet enhancements Stephen Hemminger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260206170435.302184-2-spinler@cesnet.cz \
    --to=spinler@cesnet.cz \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox