public inbox for dev@dpdk.org
 help / color / mirror / Atom feed
From: spinler@cesnet.cz
To: dev@dpdk.org
Cc: Martin Spinler <spinler@cesnet.cz>
Subject: [PATCH 4/7] net/nfb: support setting RS-FEC mode
Date: Fri,  6 Feb 2026 18:04:32 +0100	[thread overview]
Message-ID: <20260206170435.302184-5-spinler@cesnet.cz> (raw)
In-Reply-To: <20260206170435.302184-1-spinler@cesnet.cz>

From: Martin Spinler <spinler@cesnet.cz>

Enable basic configuration of the RS-FEC link mode over MDIO.

Signed-off-by: Martin Spinler <spinler@cesnet.cz>
---
 drivers/net/nfb/nfb_ethdev.c | 62 ++++++++++++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

diff --git a/drivers/net/nfb/nfb_ethdev.c b/drivers/net/nfb/nfb_ethdev.c
index 950754f4cf..b927d006e7 100644
--- a/drivers/net/nfb/nfb_ethdev.c
+++ b/drivers/net/nfb/nfb_ethdev.c
@@ -575,6 +575,66 @@ nfb_eth_fw_version_get(struct rte_eth_dev *dev, char *fw_version,
 	return 0;
 }
 
+static int
+nfb_eth_fec_get(struct rte_eth_dev *dev, uint32_t *fec_capa)
+{
+	int reg;
+	struct pmd_internals *intl = dev->process_private;
+	struct mdio_if_info *if_info;
+
+	*fec_capa = 0;
+	if (!intl->max_eth)
+		return 0;
+
+	if_info = &intl->eth_node[0].if_info;
+
+	reg = nfb_mdio_if_read_pma(if_info, NFB_MDIO_PMA_RSFEC_CR);
+	if (reg < 0)
+		return -EIO;
+
+	*fec_capa = (reg & NFB_MDIO_PMA_RSFEC_CR_ENABLE) ?
+			RTE_ETH_FEC_MODE_CAPA_MASK(RS) :
+			RTE_ETH_FEC_MODE_CAPA_MASK(NOFEC);
+
+	return 0;
+}
+
+static int
+nfb_eth_fec_set(struct rte_eth_dev *dev, uint32_t fec_capa)
+{
+	int ret;
+	uint32_t fec_capa2 = 0;
+	int reg;
+
+	struct pmd_internals *intl = dev->process_private;
+	struct mdio_if_info *if_info;
+
+	if (!intl->max_eth)
+		return 0;
+
+	if_info = &intl->eth_node[0].if_info;
+
+	if (fec_capa & RTE_ETH_FEC_MODE_CAPA_MASK(AUTO))
+		return -EINVAL;
+
+	reg = nfb_mdio_if_read_pma(if_info, NFB_MDIO_PMA_RSFEC_CR);
+	if (reg < 0)
+		return -EIO;
+
+	reg = (fec_capa & RTE_ETH_FEC_MODE_CAPA_MASK(RS)) ?
+			(reg | NFB_MDIO_PMA_RSFEC_CR_ENABLE) :
+			(reg & ~NFB_MDIO_PMA_RSFEC_CR_ENABLE);
+	nfb_mdio_if_write_pma(if_info, NFB_MDIO_PMA_RSFEC_CR, reg);
+	ret = nfb_eth_fec_get(dev, &fec_capa2);
+	if (ret)
+		return ret;
+
+	if (fec_capa != fec_capa2)
+		return -EINVAL;
+
+	return 0;
+}
+
 static const struct eth_dev_ops ops = {
 	.dev_start = nfb_eth_dev_start,
 	.dev_stop = nfb_eth_dev_stop,
@@ -602,6 +662,8 @@ static const struct eth_dev_ops ops = {
 	.mac_addr_add = nfb_eth_mac_addr_add,
 	.mac_addr_remove = nfb_eth_mac_addr_remove,
 	.fw_version_get = nfb_eth_fw_version_get,
+	.fec_get = nfb_eth_fec_get,
+	.fec_set = nfb_eth_fec_set,
 };
 
 /**
-- 
2.53.0


  parent reply	other threads:[~2026-02-06 17:05 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-06 17:04 [PATCH 0/7] net/nfb: ethernet enhancements spinler
2026-02-06 17:04 ` [PATCH 1/7] net/nfb: use MAC address assigned to card spinler
2026-02-06 17:04 ` [PATCH 2/7] net/nfb: get correct link speed spinler
2026-02-06 17:04 ` [PATCH 3/7] net/nfb: support real link-up/down config spinler
2026-02-06 17:04 ` spinler [this message]
2026-02-06 17:04 ` [PATCH 5/7] net/nfb: support setting Rx MTU spinler
2026-02-18 18:20   ` Stephen Hemminger
2026-02-19  6:20     ` Martin Spinler
2026-02-06 17:04 ` [PATCH 6/7] net/nfb: read total stats from macs spinler
2026-02-06 17:04 ` [PATCH 7/7] doc/nfb: update release notes for nfb driver spinler
2026-02-17  4:37   ` Stephen Hemminger
2026-02-10  0:33 ` [PATCH 0/7] net/nfb: ethernet enhancements Stephen Hemminger
2026-02-12 18:52 ` Stephen Hemminger
2026-02-17 11:03 ` [PATCH v2 0/6] " spinler
2026-02-17 11:03   ` [PATCH v2 1/6] net/nfb: use MAC address assigned to card spinler
2026-02-17 11:03   ` [PATCH v2 2/6] net/nfb: get correct link speed spinler
2026-02-17 11:03   ` [PATCH v2 3/6] net/nfb: support real link-up/down config spinler
2026-02-17 11:03   ` [PATCH v2 4/6] net/nfb: support setting RS-FEC mode spinler
2026-02-17 11:03   ` [PATCH v2 5/6] net/nfb: support setting Rx MTU spinler
2026-02-17 11:03   ` [PATCH v2 6/6] net/nfb: read total stats from macs spinler
2026-02-18 18:21   ` [PATCH v2 0/6] net/nfb: ethernet enhancements Stephen Hemminger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260206170435.302184-5-spinler@cesnet.cz \
    --to=spinler@cesnet.cz \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox