From: spinler@cesnet.cz
To: dev@dpdk.org
Cc: Martin Spinler <spinler@cesnet.cz>
Subject: [PATCH v8 0/8] net/nfb: rework to real multiport
Date: Fri, 13 Feb 2026 19:53:09 +0100 [thread overview]
Message-ID: <20260213185317.1893353-1-spinler@cesnet.cz> (raw)
In-Reply-To: <20260115151656.393106-1-spinler@cesnet.cz>
From: Martin Spinler <spinler@cesnet.cz>
This series implements real multiport for better user experience.
The existing driver creates one ethdev/port for one PCI device.
As the CESNET-NDK based cards aren't capable to represent each
Ethernet port by own PCI device, new driver implementation
processes real port configuration from firmware/card and switches
from rte_eth_dev_pci_generic_probe to multiple rte_eth_dev_create calls.
---
Depends-on: patch-37245 ("doc/nfb: update release notes for nfb driver")
v8:
* removed double usage of TAILQ_REMOVE
* added "ready" bit to private struct for syncing of the data
shared with secondary processes on init
* added "ret" to nfb_ifc_create_params for use in failed
nfb_eth_dev_create_for_ifc() called from rte_kvargs_process();
now returns the right error value
* added bounds check on queue and MAC indexes in mapping
* added bounds check on queue index in queue setup
* added NULL check after rte_eth_dev_get_by_name()
* added errno check after strtoul()
* added integer overflow check in port validation
* added comment with usage of separate nfb handles
* used base 10 for port number as strtoul() param
Martin Spinler (8):
net/nfb: prepare for indirect queue mapping scheme
net/nfb: create one ethdev per ethernet port
net/nfb: add vdev as alternative device probe method
net/nfb: add device argument "port" to limit used ports
net/nfb: init only MACs associated with device
net/nfb: add compatible cards to driver PCI ID table
net/nfb: report firmware version
doc/nfb: cleanup and update guide
doc/guides/nics/features/nfb.ini | 4 +
doc/guides/nics/nfb.rst | 187 +++++-----
doc/guides/rel_notes/release_26_03.rst | 6 +
drivers/net/nfb/meson.build | 1 +
drivers/net/nfb/nfb.h | 57 ++-
drivers/net/nfb/nfb_ethdev.c | 487 +++++++++++++++++++------
drivers/net/nfb/nfb_rx.c | 33 +-
drivers/net/nfb/nfb_rx.h | 9 +-
drivers/net/nfb/nfb_tx.c | 30 +-
drivers/net/nfb/nfb_tx.h | 7 +-
drivers/net/nfb/nfb_vdev.c | 107 ++++++
11 files changed, 672 insertions(+), 256 deletions(-)
create mode 100644 drivers/net/nfb/nfb_vdev.c
--
2.53.0
next prev parent reply other threads:[~2026-02-13 18:53 UTC|newest]
Thread overview: 131+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-15 15:16 [PATCH 0/8] net/nfb: rework to real multiport spinler
2026-01-15 15:16 ` [PATCH 1/8] net/nfb: prepare for indirect queue mapping scheme spinler
2026-01-16 17:34 ` Stephen Hemminger
2026-01-20 15:16 ` Martin Spinler
2026-01-15 15:16 ` [PATCH 2/8] net/nfb: create ethdev for every eth port/channel spinler
2026-01-15 15:16 ` [PATCH 3/8] net/nfb: add vdev as alternative device probe method spinler
2026-01-15 15:16 ` [PATCH 4/8] net/nfb: add device argument "port" to limit used ports spinler
2026-01-16 17:36 ` Stephen Hemminger
2026-01-20 15:16 ` Martin Spinler
2026-01-16 17:36 ` Stephen Hemminger
2026-01-16 17:37 ` Stephen Hemminger
2026-01-15 15:16 ` [PATCH 5/8] net/nfb: init only MACs associated with device spinler
2026-01-15 15:16 ` [PATCH 6/8] net/nfb: add compatible cards to driver PCI ID table spinler
2026-01-15 15:16 ` [PATCH 7/8] net/nfb: report firmware version spinler
2026-01-15 15:16 ` [PATCH 8/8] doc/nfb: cleanup and update guide spinler
2026-01-16 5:50 ` [PATCH 0/8] net/nfb: rework to real multiport Stephen Hemminger
2026-01-16 16:44 ` [PATCH v2 " spinler
2026-01-16 16:44 ` [PATCH v2 1/8] net/nfb: prepare for indirect queue mapping scheme spinler
2026-01-16 16:44 ` [PATCH v2 2/8] net/nfb: create ethdev for every eth port/channel spinler
2026-01-16 16:44 ` [PATCH v2 3/8] net/nfb: add vdev as alternative device probe method spinler
2026-01-16 16:44 ` [PATCH v2 4/8] net/nfb: add device argument "port" to limit used ports spinler
2026-01-16 16:44 ` [PATCH v2 5/8] net/nfb: init only MACs associated with device spinler
2026-01-16 16:44 ` [PATCH v2 6/8] net/nfb: add compatible cards to driver PCI ID table spinler
2026-01-16 16:44 ` [PATCH v2 7/8] net/nfb: report firmware version spinler
2026-01-16 16:44 ` [PATCH v2 8/8] doc/nfb: cleanup and update guide spinler
2026-01-20 2:25 ` [PATCH v2 0/8] net/nfb: rework to real multiport Stephen Hemminger
2026-01-20 15:16 ` Martin Spinler
2026-01-21 17:03 ` [PATCH v3 " spinler
2026-01-21 17:03 ` [PATCH v3 1/8] net/nfb: prepare for indirect queue mapping scheme spinler
2026-01-21 17:03 ` [PATCH v3 2/8] net/nfb: create ethdev for every eth port/channel spinler
2026-01-21 17:03 ` [PATCH v3 3/8] net/nfb: add vdev as alternative device probe method spinler
2026-01-21 17:40 ` Stephen Hemminger
2026-01-21 17:03 ` [PATCH v3 4/8] net/nfb: add device argument "port" to limit used ports spinler
2026-01-21 17:03 ` [PATCH v3 5/8] net/nfb: init only MACs associated with device spinler
2026-01-21 17:03 ` [PATCH v3 6/8] net/nfb: add compatible cards to driver PCI ID table spinler
2026-01-21 17:03 ` [PATCH v3 7/8] net/nfb: report firmware version spinler
2026-01-21 17:03 ` [PATCH v3 8/8] doc/nfb: cleanup and update guide spinler
2026-01-21 17:41 ` Stephen Hemminger
2026-01-21 17:42 ` [PATCH v3 0/8] net/nfb: rework to real multiport Stephen Hemminger
2026-01-22 7:27 ` [PATCH v4 " spinler
2026-01-22 7:27 ` [PATCH v4 1/8] net/nfb: prepare for indirect queue mapping scheme spinler
2026-01-22 7:27 ` [PATCH v4 2/8] net/nfb: create ethdev for every eth port/channel spinler
2026-01-22 7:27 ` [PATCH v4 3/8] net/nfb: add vdev as alternative device probe method spinler
2026-01-22 7:27 ` [PATCH v4 4/8] net/nfb: add device argument "port" to limit used ports spinler
2026-01-22 7:27 ` [PATCH v4 5/8] net/nfb: init only MACs associated with device spinler
2026-01-22 7:27 ` [PATCH v4 6/8] net/nfb: add compatible cards to driver PCI ID table spinler
2026-01-22 7:27 ` [PATCH v4 7/8] net/nfb: report firmware version spinler
2026-01-22 7:27 ` [PATCH v4 8/8] doc/nfb: cleanup and update guide spinler
2026-01-23 1:00 ` [PATCH v4 0/8] net/nfb: rework to real multiport Stephen Hemminger
2026-01-23 1:01 ` Stephen Hemminger
2026-01-23 1:14 ` Stephen Hemminger
2026-01-23 17:34 ` Martin Spinler
2026-01-23 17:22 ` [PATCH v5 " spinler
2026-01-23 17:22 ` [PATCH v5 1/8] net/nfb: prepare for indirect queue mapping scheme spinler
2026-01-23 17:22 ` [PATCH v5 2/8] net/nfb: create one ethdev per ethernet port spinler
2026-01-27 0:37 ` Stephen Hemminger
2026-01-27 8:12 ` Martin Spinler
2026-01-27 14:09 ` Stephen Hemminger
2026-01-23 17:22 ` [PATCH v5 3/8] net/nfb: add vdev as alternative device probe method spinler
2026-01-23 17:22 ` [PATCH v5 4/8] net/nfb: add device argument "port" to limit used ports spinler
2026-01-23 17:22 ` [PATCH v5 5/8] net/nfb: init only MACs associated with device spinler
2026-01-23 17:22 ` [PATCH v5 6/8] net/nfb: add compatible cards to driver PCI ID table spinler
2026-01-23 17:22 ` [PATCH v5 7/8] net/nfb: report firmware version spinler
2026-01-23 17:22 ` [PATCH v5 8/8] doc/nfb: cleanup and update guide spinler
2026-01-24 19:10 ` [REVIEW] " Stephen Hemminger
2026-01-24 19:19 ` [PATCH v5 0/8] net/nfb: rework to real multiport Stephen Hemminger
2026-02-02 15:34 ` [PATCH v6 " spinler
2026-02-02 15:34 ` [PATCH v6 1/8] net/nfb: prepare for indirect queue mapping scheme spinler
2026-02-02 17:50 ` Stephen Hemminger
2026-02-02 15:34 ` [PATCH v6 2/8] net/nfb: create one ethdev per ethernet port spinler
2026-02-02 15:34 ` [PATCH v6 3/8] net/nfb: add vdev as alternative device probe method spinler
2026-02-02 15:34 ` [PATCH v6 4/8] net/nfb: add device argument "port" to limit used ports spinler
2026-02-02 15:34 ` [PATCH v6 5/8] net/nfb: init only MACs associated with device spinler
2026-02-02 15:34 ` [PATCH v6 6/8] net/nfb: add compatible cards to driver PCI ID table spinler
2026-02-02 15:34 ` [PATCH v6 7/8] net/nfb: report firmware version spinler
2026-02-02 15:34 ` [PATCH v6 8/8] doc/nfb: cleanup and update guide spinler
2026-02-02 17:42 ` [REVIEW] " Stephen Hemminger
2026-02-02 17:51 ` Stephen Hemminger
2026-02-02 17:52 ` Stephen Hemminger
2026-02-02 17:54 ` Stephen Hemminger
2026-02-02 17:54 ` Stephen Hemminger
2026-02-04 12:31 ` [PATCH v7 0/8] net/nfb: rework to real multiport spinler
2026-02-04 12:31 ` [PATCH v7 1/8] net/nfb: prepare for indirect queue mapping scheme spinler
2026-02-04 12:31 ` [PATCH v7 2/8] net/nfb: create one ethdev per ethernet port spinler
2026-02-04 12:31 ` [PATCH v7 3/8] net/nfb: add vdev as alternative device probe method spinler
2026-02-04 12:31 ` [PATCH v7 4/8] net/nfb: add device argument "port" to limit used ports spinler
2026-02-04 12:31 ` [PATCH v7 5/8] net/nfb: init only MACs associated with device spinler
2026-02-04 12:31 ` [PATCH v7 6/8] net/nfb: add compatible cards to driver PCI ID table spinler
2026-02-04 12:31 ` [PATCH v7 7/8] net/nfb: report firmware version spinler
2026-02-04 12:31 ` [PATCH v7 8/8] doc/nfb: cleanup and update guide spinler
2026-02-10 0:35 ` [PATCH v7 0/8] net/nfb: rework to real multiport Stephen Hemminger
2026-02-13 18:53 ` Martin Špinler
2026-02-12 18:35 ` Stephen Hemminger
2026-02-13 18:53 ` Martin Špinler
2026-02-13 18:53 ` spinler [this message]
2026-02-13 18:53 ` [PATCH v8 1/8] net/nfb: prepare for indirect queue mapping scheme spinler
2026-02-13 18:53 ` [PATCH v8 2/8] net/nfb: create one ethdev per ethernet port spinler
2026-02-13 19:33 ` Stephen Hemminger
2026-02-13 18:53 ` [PATCH v8 3/8] net/nfb: add vdev as alternative device probe method spinler
2026-02-13 18:53 ` [PATCH v8 4/8] net/nfb: add device argument "port" to limit used ports spinler
2026-02-13 18:53 ` [PATCH v8 5/8] net/nfb: init only MACs associated with device spinler
2026-02-13 18:53 ` [PATCH v8 6/8] net/nfb: add compatible cards to driver PCI ID table spinler
2026-02-13 18:53 ` [PATCH v8 7/8] net/nfb: report firmware version spinler
2026-02-13 18:53 ` [PATCH v8 8/8] doc/nfb: cleanup and update guide spinler
2026-02-13 19:39 ` [PATCH v8 0/8] net/nfb: rework to real multiport Stephen Hemminger
2026-02-13 20:13 ` Martin Špinler
2026-02-16 16:24 ` [PATCH v9 " spinler
2026-02-16 16:24 ` [PATCH v9 1/8] net/nfb: prepare for indirect queue mapping scheme spinler
2026-02-16 16:25 ` [PATCH v9 2/8] net/nfb: create one ethdev per ethernet port spinler
2026-02-16 16:25 ` [PATCH v9 3/8] net/nfb: add vdev as alternative device probe method spinler
2026-02-16 16:25 ` [PATCH v9 4/8] net/nfb: add device argument "port" to limit used ports spinler
2026-02-16 16:25 ` [PATCH v9 5/8] net/nfb: init only MACs associated with device spinler
2026-02-16 16:25 ` [PATCH v9 6/8] net/nfb: add compatible cards to driver PCI ID table spinler
2026-02-16 16:25 ` [PATCH v9 7/8] net/nfb: report firmware version spinler
2026-02-16 16:25 ` [PATCH v9 8/8] doc/nfb: cleanup and update guide spinler
2026-02-16 22:11 ` [PATCH v9 0/8] net/nfb: rework to real multiport Stephen Hemminger
2026-02-17 7:09 ` Martin Spinler
2026-02-17 7:10 ` [PATCH v10 " spinler
2026-02-17 7:10 ` [PATCH v10 1/8] net/nfb: prepare for indirect queue mapping scheme spinler
2026-02-17 7:10 ` [PATCH v10 2/8] net/nfb: create one ethdev per ethernet port spinler
2026-02-17 7:10 ` [PATCH v10 3/8] net/nfb: add vdev as alternative device probe method spinler
2026-02-17 7:10 ` [PATCH v10 4/8] net/nfb: add device argument "port" to limit used ports spinler
2026-02-17 7:10 ` [PATCH v10 5/8] net/nfb: init only MACs associated with device spinler
2026-02-17 7:10 ` [PATCH v10 6/8] net/nfb: add compatible cards to driver PCI ID table spinler
2026-02-17 7:10 ` [PATCH v10 7/8] net/nfb: report firmware version spinler
2026-02-17 7:10 ` [PATCH v10 8/8] doc/nfb: cleanup and update guide spinler
2026-03-13 16:48 ` Thomas Monjalon
2026-02-17 14:58 ` [PATCH v10 0/8] net/nfb: rework to real multiport Stephen Hemminger
2026-02-17 15:05 ` Martin Spinler
2026-02-17 15:22 ` Martin Spinler
2026-02-19 0:12 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260213185317.1893353-1-spinler@cesnet.cz \
--to=spinler@cesnet.cz \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox