[PATCH v2 0/6] net/nfb: ethernet enhancements

[spinler@cesnet.cz]

From: Martin Spinler <spinler@cesnet.cz>

This set includes minor enhancements to the Ethernet
configuration and overall usage.

---
Depends-on: series-37385 ("net/nfb: rework to real multiport")

v2:
* P2/7: close MDIO handles in error path of nfb_nc_eth_init
* P2/7: add bounds check for eth_node population
* P2/7: add check for nfb_mdio_if_read_pma() return value
        in nfb_mdio_cl45_pma_get_speed_capa()
* P2/7: add include guard to nfb_mdio.h
* P3/7: move nfb_eth_dev_set_link() (PMA configuration)
        before MAC enable/disable call to avoid inconsistency on failure
* P4/7: add check for nfb_mdio_if_write_pma() return value
* P5/7: set dev_info->max_mtu
* P5/7: add frame_len_max_cap to struct pmd_priv; used in MTU configuration
* P5/7: extract nfb_mac_read_frame_len_max_cap() from nfb_eth_mtu_set()
* P5/7: check for MTU overflow
* P6/7: use direct value for stats->ierrors from rx_cntrs
* P7/7: remove this patch completely and distribute release notes update
        to matching patches

Martin Spinler (6):
  net/nfb: use MAC address assigned to card
  net/nfb: get correct link speed
  net/nfb: support real link-up/down config
  net/nfb: support setting RS-FEC mode
  net/nfb: support setting Rx MTU
  net/nfb: read total stats from macs

 doc/guides/rel_notes/release_26_03.rst |   3 +-
 drivers/net/nfb/meson.build            |   1 +
 drivers/net/nfb/nfb.h                  |   8 +
 drivers/net/nfb/nfb_ethdev.c           | 247 +++++++++++++++++++++----
 drivers/net/nfb/nfb_mdio.c             |  44 +++++
 drivers/net/nfb/nfb_mdio.h             |  39 ++++
 drivers/net/nfb/nfb_stats.c            |  40 ++--
 7 files changed, 335 insertions(+), 47 deletions(-)
 create mode 100644 drivers/net/nfb/nfb_mdio.c
 create mode 100644 drivers/net/nfb/nfb_mdio.h

-- 
2.53.0