[PATCH 1/4] net/axgbe: fix resource leaks in device init error paths

[Stephen Hemminger <stephen@networkplumber.org>]

Several error paths in eth_axgbe_dev_init() fail to release
previously allocated resources:

 - When hash_mac_addrs allocation fails, mac_addrs is leaked.
 - When phy_init() fails, hash_mac_addrs is leaked.
 - The return value of rte_intr_callback_register() is not
   checked, so a failure leaves the driver without interrupt
   handling but continuing as if everything is functional.
 - When the DMA software reset via hw_if.exit() fails, the
   error is only logged and initialization continues with the
   hardware in an undefined state.

Fix all error paths to properly clean up previously allocated
resources, check the interrupt registration return value, and
propagate the DMA reset failure.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 drivers/net/axgbe/axgbe_ethdev.c | 21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

diff --git a/drivers/net/axgbe/axgbe_ethdev.c b/drivers/net/axgbe/axgbe_ethdev.c
index cfcd880961..709a52acc8 100644
--- a/drivers/net/axgbe/axgbe_ethdev.c
+++ b/drivers/net/axgbe/axgbe_ethdev.c
@@ -2359,6 +2359,8 @@ eth_axgbe_dev_init(struct rte_eth_dev *eth_dev)
 		PMD_INIT_LOG(ERR,
 			     "Failed to allocate %d bytes needed to "
 			     "store MAC addresses", len);
+		rte_free(eth_dev->data->mac_addrs);
+		eth_dev->data->mac_addrs = NULL;
 		return -ENOMEM;
 	}
 
@@ -2405,8 +2407,14 @@ eth_axgbe_dev_init(struct rte_eth_dev *eth_dev)
 					  pdata->vdata->rx_max_fifo_size);
 	/* Issue software reset to DMA */
 	ret = pdata->hw_if.exit(pdata);
-	if (ret)
+	if (ret) {
 		PMD_DRV_LOG_LINE(ERR, "hw_if->exit EBUSY error");
+		rte_free(eth_dev->data->hash_mac_addrs);
+		eth_dev->data->hash_mac_addrs = NULL;
+		rte_free(eth_dev->data->mac_addrs);
+		eth_dev->data->mac_addrs = NULL;
+		return ret;
+	}
 
 	/* Set default configuration data */
 	axgbe_default_config(pdata);
@@ -2426,14 +2434,23 @@ eth_axgbe_dev_init(struct rte_eth_dev *eth_dev)
 
 	ret = pdata->phy_if.phy_init(pdata);
 	if (ret) {
+		rte_free(eth_dev->data->hash_mac_addrs);
+		eth_dev->data->hash_mac_addrs = NULL;
 		rte_free(eth_dev->data->mac_addrs);
 		eth_dev->data->mac_addrs = NULL;
 		return ret;
 	}
 
-	rte_intr_callback_register(pci_dev->intr_handle,
+	ret = rte_intr_callback_register(pci_dev->intr_handle,
 				   axgbe_dev_interrupt_handler,
 				   (void *)eth_dev);
+	if (ret) {
+		rte_free(eth_dev->data->hash_mac_addrs);
+		eth_dev->data->hash_mac_addrs = NULL;
+		rte_free(eth_dev->data->mac_addrs);
+		eth_dev->data->mac_addrs = NULL;
+		return ret;
+	}
 	PMD_INIT_LOG(DEBUG, "port %d vendorID=0x%x deviceID=0x%x",
 		     eth_dev->data->port_id, pci_dev->id.vendor_id,
 		     pci_dev->id.device_id);
-- 
2.51.0