From: Stephen Hemminger <stephen@networkplumber.org>
To: dev@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>,
Nithin Dabilpuram <ndabilpuram@marvell.com>,
Kiran Kumar K <kirankumark@marvell.com>,
Sunil Kumar Kori <skori@marvell.com>,
Satha Rao <skoteshwar@marvell.com>,
Harman Kalra <hkalra@marvell.com>
Subject: [PATCH v2 1/3] net/cnxk: add pause to spinloops
Date: Mon, 13 Apr 2026 09:45:29 -0700 [thread overview]
Message-ID: <20260413164652.33291-2-stephen@networkplumber.org> (raw)
In-Reply-To: <20260413164652.33291-1-stephen@networkplumber.org>
On SMT systems when a spinloop is done without a pause
it may cause excessive latency. This problem was found
by the fix_empty_spinloops coccinelle script.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
drivers/net/cnxk/cn10k_tx.h | 4 ++--
drivers/net/cnxk/cn20k_tx.h | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/cnxk/cn10k_tx.h b/drivers/net/cnxk/cn10k_tx.h
index 8c912a1f35..7657b06190 100644
--- a/drivers/net/cnxk/cn10k_tx.h
+++ b/drivers/net/cnxk/cn10k_tx.h
@@ -167,7 +167,7 @@ cn10k_nix_vwqe_wait_fc(struct cn10k_eth_txq *txq, uint16_t req)
#else
RTE_SET_USED(pkts);
while (rte_atomic_load_explicit(&txq->fc_cache_pkts, rte_memory_order_relaxed) < 0)
- ;
+ rte_pause();
#endif
cached = rte_atomic_fetch_sub_explicit(&txq->fc_cache_pkts, req, rte_memory_order_acquire) -
req;
@@ -402,7 +402,7 @@ cn10k_nix_sec_fc_wait(struct cn10k_eth_txq *txq, uint16_t nb_pkts)
#else
/* Wait for primary core to refill FC. */
while (rte_atomic_load_explicit(fc_sw, rte_memory_order_relaxed) < 0)
- ;
+ rte_pause();
#endif
val = rte_atomic_fetch_sub_explicit(fc_sw, nb_pkts, rte_memory_order_acquire) - nb_pkts;
diff --git a/drivers/net/cnxk/cn20k_tx.h b/drivers/net/cnxk/cn20k_tx.h
index 8e64d2e352..ac0b00ef31 100644
--- a/drivers/net/cnxk/cn20k_tx.h
+++ b/drivers/net/cnxk/cn20k_tx.h
@@ -165,7 +165,7 @@ cn20k_nix_vwqe_wait_fc(struct cn20k_eth_txq *txq, uint16_t req)
#else
RTE_SET_USED(pkts);
while (rte_atomic_load_explicit(&txq->fc_cache_pkts, rte_memory_order_relaxed) < 0)
- ;
+ rte_pause();
#endif
cached = rte_atomic_fetch_sub_explicit(&txq->fc_cache_pkts, req, rte_memory_order_acquire) -
req;
@@ -392,7 +392,7 @@ cn20k_nix_sec_fc_wait(struct cn20k_eth_txq *txq, uint16_t nb_pkts)
#else
/* Wait for primary core to refill FC. */
while (rte_atomic_load_explicit(fc_sw, rte_memory_order_relaxed) < 0)
- ;
+ rte_pause();
#endif
val = rte_atomic_fetch_sub_explicit(fc_sw, nb_pkts, rte_memory_order_acquire) - nb_pkts;
--
2.53.0
next prev parent reply other threads:[~2026-04-13 16:47 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-21 18:05 [RFC 0/3] Add pause to empty spinloops Stephen Hemminger
2026-01-21 18:05 ` [RFC 1/3] net/cnxk: add pause to spinloops Stephen Hemminger
2026-01-21 18:05 ` [RFC 2/3] event/cnxk: " Stephen Hemminger
2026-01-21 21:01 ` Stephen Hemminger
2026-01-21 18:05 ` [RFC 3/3] devtools/cocci: add script to find empty spinloops Stephen Hemminger
2026-04-13 16:45 ` [PATCH v2 0/3] Add pause to empty spin loops Stephen Hemminger
2026-04-13 16:45 ` Stephen Hemminger [this message]
2026-04-13 16:45 ` [PATCH v2 2/3] event/cnxk: add pause to spinloops Stephen Hemminger
2026-04-13 16:45 ` [PATCH v2 3/3] devtools/cocci: add script to find empty spinloops Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260413164652.33291-2-stephen@networkplumber.org \
--to=stephen@networkplumber.org \
--cc=dev@dpdk.org \
--cc=hkalra@marvell.com \
--cc=kirankumark@marvell.com \
--cc=ndabilpuram@marvell.com \
--cc=skori@marvell.com \
--cc=skoteshwar@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox