From: liujie5@linkdatatechnology.com
To: stephen@networkplumber.org
Cc: dev@dpdk.org, Jie Liu <liujie5@linkdatatechnology.com>
Subject: [PATCH v12 00/10] net/sxe2: fix logic errors and address feedback
Date: Tue, 12 May 2026 16:06:01 +0800 [thread overview]
Message-ID: <20260512080616.454171-1-liujie5@linkdatatechnology.com> (raw)
In-Reply-To: <20260506113557.1151250-11-liujie5@linkdatatechnology.com>
From: Jie Liu <liujie5@linkdatatechnology.com>
This patch set addresses the feedback received on the v10 submission
for the sxe2 PMD. The primary focus is on fixing vector path selection,
ensuring memory safety during mbuf initialization, and cleaning up
redundant logic in the configuration functions.
v12 Changes:
- Fixed vector Rx burst function being overwritten by scalar selection.
- Refactored Rx/Tx mode set functions to seed flags from caps first,eliminating tautological checks.
- Added memset for mbuf_def in vector init to avoid uninitialized reads.
- Converted pci_map_addr_info to designated initializers.
- Removed dead Windows-only code in meson.build.
- Added NULL checks for mbuf free for driver-wide consistency.
- Updated burst_mode_get to accurately report AVX paths.
- Adjusted SXE2_ETH_OVERHEAD to match actual VLAN capabilities.
Jie Liu (10):
mailmap: add Jie Liu
doc: add sxe2 guide and release notes
common/sxe2: add sxe2 basic structures
drivers: add base driver skeleton
drivers: add base driver probe skeleton
drivers: support PCI BAR mapping
common/sxe2: add ioctl interface for DMA map and unmap
net/sxe2: support queue setup and control
drivers: add data path for Rx and Tx
net/sxe2: add vectorized Rx and Tx
.mailmap | 1 +
doc/guides/nics/features/sxe2.ini | 30 +
doc/guides/nics/index.rst | 1 +
doc/guides/nics/sxe2.rst | 34 +
doc/guides/rel_notes/release_26_07.rst | 4 +
drivers/common/sxe2/meson.build | 15 +
drivers/common/sxe2/sxe2_common.c | 685 +++++++++++++++
drivers/common/sxe2/sxe2_common.h | 86 ++
drivers/common/sxe2/sxe2_common_log.h | 83 ++
drivers/common/sxe2/sxe2_errno.h | 110 +++
drivers/common/sxe2/sxe2_host_regs.h | 707 +++++++++++++++
drivers/common/sxe2/sxe2_internal_ver.h | 33 +
drivers/common/sxe2/sxe2_ioctl_chnl.c | 326 +++++++
drivers/common/sxe2/sxe2_ioctl_chnl.h | 141 +++
drivers/common/sxe2/sxe2_ioctl_chnl_func.h | 63 ++
drivers/common/sxe2/sxe2_osal.h | 584 +++++++++++++
drivers/common/sxe2/sxe2_type.h | 60 ++
drivers/meson.build | 1 +
drivers/net/meson.build | 1 +
drivers/net/sxe2/meson.build | 32 +
drivers/net/sxe2/sxe2_cmd_chnl.c | 319 +++++++
drivers/net/sxe2/sxe2_cmd_chnl.h | 33 +
drivers/net/sxe2/sxe2_drv_cmd.h | 389 +++++++++
drivers/net/sxe2/sxe2_ethdev.c | 942 ++++++++++++++++++++
drivers/net/sxe2/sxe2_ethdev.h | 315 +++++++
drivers/net/sxe2/sxe2_irq.h | 49 ++
drivers/net/sxe2/sxe2_queue.c | 67 ++
drivers/net/sxe2/sxe2_queue.h | 194 +++++
drivers/net/sxe2/sxe2_rx.c | 579 +++++++++++++
drivers/net/sxe2/sxe2_rx.h | 34 +
drivers/net/sxe2/sxe2_tx.c | 447 ++++++++++
drivers/net/sxe2/sxe2_tx.h | 32 +
drivers/net/sxe2/sxe2_txrx.c | 372 ++++++++
drivers/net/sxe2/sxe2_txrx.h | 22 +
drivers/net/sxe2/sxe2_txrx_common.h | 541 ++++++++++++
drivers/net/sxe2/sxe2_txrx_poll.c | 945 +++++++++++++++++++++
drivers/net/sxe2/sxe2_txrx_poll.h | 17 +
drivers/net/sxe2/sxe2_txrx_vec.c | 197 +++++
drivers/net/sxe2/sxe2_txrx_vec.h | 72 ++
drivers/net/sxe2/sxe2_txrx_vec_common.h | 235 +++++
drivers/net/sxe2/sxe2_txrx_vec_sse.c | 545 ++++++++++++
drivers/net/sxe2/sxe2_vsi.c | 212 +++++
drivers/net/sxe2/sxe2_vsi.h | 205 +++++
43 files changed, 9760 insertions(+)
create mode 100644 doc/guides/nics/features/sxe2.ini
create mode 100644 doc/guides/nics/sxe2.rst
create mode 100644 drivers/common/sxe2/meson.build
create mode 100644 drivers/common/sxe2/sxe2_common.c
create mode 100644 drivers/common/sxe2/sxe2_common.h
create mode 100644 drivers/common/sxe2/sxe2_common_log.h
create mode 100644 drivers/common/sxe2/sxe2_errno.h
create mode 100644 drivers/common/sxe2/sxe2_host_regs.h
create mode 100644 drivers/common/sxe2/sxe2_internal_ver.h
create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.c
create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.h
create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl_func.h
create mode 100644 drivers/common/sxe2/sxe2_osal.h
create mode 100644 drivers/common/sxe2/sxe2_type.h
create mode 100644 drivers/net/sxe2/meson.build
create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.c
create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.h
create mode 100644 drivers/net/sxe2/sxe2_drv_cmd.h
create mode 100644 drivers/net/sxe2/sxe2_ethdev.c
create mode 100644 drivers/net/sxe2/sxe2_ethdev.h
create mode 100644 drivers/net/sxe2/sxe2_irq.h
create mode 100644 drivers/net/sxe2/sxe2_queue.c
create mode 100644 drivers/net/sxe2/sxe2_queue.h
create mode 100644 drivers/net/sxe2/sxe2_rx.c
create mode 100644 drivers/net/sxe2/sxe2_rx.h
create mode 100644 drivers/net/sxe2/sxe2_tx.c
create mode 100644 drivers/net/sxe2/sxe2_tx.h
create mode 100644 drivers/net/sxe2/sxe2_txrx.c
create mode 100644 drivers/net/sxe2/sxe2_txrx.h
create mode 100644 drivers/net/sxe2/sxe2_txrx_common.h
create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.c
create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.h
create mode 100644 drivers/net/sxe2/sxe2_txrx_vec.c
create mode 100644 drivers/net/sxe2/sxe2_txrx_vec.h
create mode 100644 drivers/net/sxe2/sxe2_txrx_vec_common.h
create mode 100644 drivers/net/sxe2/sxe2_txrx_vec_sse.c
create mode 100644 drivers/net/sxe2/sxe2_vsi.c
create mode 100644 drivers/net/sxe2/sxe2_vsi.h
--
2.47.3
next prev parent reply other threads:[~2026-05-12 8:07 UTC|newest]
Thread overview: 143+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-30 7:01 [PATCH v1 0/9] common/sxe2: add common functions for sxe2 driver liujie5
2026-04-30 7:01 ` [PATCH v1 1/9] mailmap: add Jie Liu liujie5
2026-04-30 7:01 ` [PATCH v1 2/9] doc: add sxe2 guide and release notes liujie5
2026-04-30 7:01 ` [PATCH v1 3/9] drivers: add sxe2 basic structures liujie5
2026-04-30 7:01 ` [PATCH v1 4/9] common/sxe2: add base driver skeleton liujie5
2026-04-30 7:01 ` [PATCH v1 5/9] drivers: add base driver probe skeleton liujie5
2026-04-30 7:01 ` [PATCH v1 6/9] drivers: support PCI BAR mapping liujie5
2026-04-30 7:01 ` [PATCH v1 7/9] common/sxe2: add ioctl interface for DMA map and unmap liujie5
2026-04-30 7:01 ` [PATCH v1 8/9] net/sxe2: support queue setup and control liujie5
2026-04-30 7:01 ` [PATCH v1 9/9] net/sxe2: add data path for Rx and Tx liujie5
2026-04-30 9:22 ` [PATCH v2 0/9] net/sxe2: added Linkdata sxe2 ethernet driver liujie5
2026-04-30 9:22 ` [PATCH v2 1/9] mailmap: add Jie Liu liujie5
2026-04-30 9:22 ` [PATCH v2 2/9] doc: add sxe2 guide and release notes liujie5
2026-04-30 9:22 ` [PATCH v2 3/9] drivers: add sxe2 basic structures liujie5
2026-04-30 9:22 ` [PATCH v2 4/9] common/sxe2: add base driver skeleton liujie5
2026-04-30 9:22 ` [PATCH v2 5/9] drivers: add base driver probe skeleton liujie5
2026-04-30 9:22 ` [PATCH v2 6/9] drivers: support PCI BAR mapping liujie5
2026-04-30 9:22 ` [PATCH v2 7/9] common/sxe2: add ioctl interface for DMA map and unmap liujie5
2026-04-30 9:22 ` [PATCH v2 8/9] net/sxe2: support queue setup and control liujie5
2026-04-30 9:22 ` [PATCH v2 9/9] net/sxe2: add data path for Rx and Tx liujie5
2026-04-30 10:18 ` [PATCH v3 0/9] net/sxe2: added Linkdata sxe2 ethernet driver liujie5
2026-04-30 10:18 ` [PATCH v3 1/9] mailmap: add Jie Liu liujie5
2026-04-30 10:18 ` [PATCH v3 2/9] doc: add sxe2 guide and release notes liujie5
2026-04-30 10:18 ` [PATCH v3 3/9] drivers: add sxe2 basic structures liujie5
2026-04-30 10:18 ` [PATCH v3 4/9] common/sxe2: add base driver skeleton liujie5
2026-04-30 10:18 ` [PATCH v3 5/9] drivers: add base driver probe skeleton liujie5
2026-04-30 10:18 ` [PATCH v3 6/9] drivers: support PCI BAR mapping liujie5
2026-04-30 10:18 ` [PATCH v3 7/9] common/sxe2: add ioctl interface for DMA map and unmap liujie5
2026-04-30 10:18 ` [PATCH v3 8/9] net/sxe2: support queue setup and control liujie5
2026-04-30 10:18 ` [PATCH v3 9/9] net/sxe2: add data path for Rx and Tx liujie5
2026-05-01 1:59 ` [PATCH v4 0/9] net/sxe2: added Linkdata sxe2 ethernet driver liujie5
2026-05-01 1:59 ` [PATCH v4 1/9] mailmap: add Jie Liu liujie5
2026-05-01 1:59 ` [PATCH v4 2/9] doc: add sxe2 guide and release notes liujie5
2026-05-01 1:59 ` [PATCH v4 3/9] drivers: add sxe2 basic structures liujie5
2026-05-01 3:05 ` Stephen Hemminger
2026-05-01 1:59 ` [PATCH v4 4/9] common/sxe2: add base driver skeleton liujie5
2026-05-01 1:59 ` [PATCH v4 5/9] drivers: add base driver probe skeleton liujie5
2026-05-01 1:59 ` [PATCH v4 6/9] drivers: support PCI BAR mapping liujie5
2026-05-01 1:59 ` [PATCH v4 7/9] common/sxe2: add ioctl interface for DMA map and unmap liujie5
2026-05-01 1:59 ` [PATCH v4 8/9] net/sxe2: support queue setup and control liujie5
2026-05-01 1:59 ` [PATCH v4 9/9] net/sxe2: add data path for Rx and Tx liujie5
2026-05-01 3:33 ` [PATCH v5 0/9] net/sxe2: added Linkdata sxe2 ethernet driver liujie5
2026-05-01 3:33 ` [PATCH v5 1/9] mailmap: add Jie Liu liujie5
2026-05-01 3:33 ` [PATCH v5 2/9] doc: add sxe2 guide and release notes liujie5
2026-05-01 3:33 ` [PATCH v5 3/9] drivers: add sxe2 basic structures liujie5
2026-05-01 14:46 ` Stephen Hemminger
2026-05-01 3:33 ` [PATCH v5 4/9] common/sxe2: add base driver skeleton liujie5
2026-05-01 3:33 ` [PATCH v5 5/9] drivers: add base driver probe skeleton liujie5
2026-05-01 3:33 ` [PATCH v5 6/9] drivers: support PCI BAR mapping liujie5
2026-05-01 3:33 ` [PATCH v5 7/9] common/sxe2: add ioctl interface for DMA map and unmap liujie5
2026-05-01 3:33 ` [PATCH v5 8/9] net/sxe2: support queue setup and control liujie5
2026-05-01 3:33 ` [PATCH v5 9/9] net/sxe2: add data path for Rx and Tx liujie5
2026-05-06 2:12 ` [PATCH v6 00/10] Add sxe2 driver liujie5
2026-05-06 2:12 ` [PATCH v6 01/10] mailmap: add Jie Liu liujie5
2026-05-06 2:12 ` [PATCH v6 02/10] doc: add sxe2 guide and release notes liujie5
2026-05-06 2:12 ` [PATCH v6 03/10] drivers: add sxe2 basic structures liujie5
2026-05-06 2:12 ` [PATCH v6 04/10] common/sxe2: add base driver skeleton liujie5
2026-05-06 2:12 ` [PATCH v6 05/10] drivers: add base driver probe skeleton liujie5
2026-05-06 2:12 ` [PATCH v6 06/10] drivers: support PCI BAR mapping liujie5
2026-05-06 2:12 ` [PATCH v6 07/10] common/sxe2: add ioctl interface for DMA map and unmap liujie5
2026-05-06 2:12 ` [PATCH v6 08/10] net/sxe2: support queue setup and control liujie5
2026-05-06 2:12 ` [PATCH v6 09/10] drivers: add data path for Rx and Tx liujie5
2026-05-06 2:12 ` [PATCH v6 10/10] net/sxe2: add vectorized " liujie5
2026-05-06 3:31 ` [PATCH v7 00/10] Add Linkdata sxe2 driver liujie5
2026-05-06 3:31 ` [PATCH v7 01/10] doc: add sxe2 guide and release notes liujie5
2026-05-06 3:31 ` [PATCH v7 02/10] drivers: add sxe2 basic structures liujie5
2026-05-06 3:31 ` [PATCH v7 03/10] common/sxe2: add base driver skeleton liujie5
2026-05-06 3:31 ` [PATCH v7 04/10] drivers: add base driver probe skeleton liujie5
2026-05-06 3:31 ` [PATCH v7 05/10] drivers: support PCI BAR mapping liujie5
2026-05-06 3:31 ` [PATCH v7 06/10] common/sxe2: add ioctl interface for DMA map and unmap liujie5
2026-05-06 3:31 ` [PATCH v7 07/10] net/sxe2: support queue setup and control liujie5
2026-05-06 3:31 ` [PATCH v7 08/10] drivers: add data path for Rx and Tx liujie5
2026-05-06 3:31 ` [PATCH v7 09/10] net/sxe2: add vectorized " liujie5
2026-05-06 6:12 ` [PATCH v8 00/10] Add Linkdata sxe2 driver liujie5
2026-05-06 6:12 ` [PATCH v8 01/10] mailmap: add Jie Liu liujie5
2026-05-06 6:12 ` [PATCH v8 02/10] doc: add sxe2 guide and release notes liujie5
2026-05-06 6:12 ` [PATCH v8 03/10] drivers: add sxe2 basic structures liujie5
2026-05-06 6:12 ` [PATCH v8 04/10] common/sxe2: add base driver skeleton liujie5
2026-05-06 6:12 ` [PATCH v8 05/10] drivers: add base driver probe skeleton liujie5
2026-05-06 6:12 ` [PATCH v8 06/10] drivers: support PCI BAR mapping liujie5
2026-05-06 6:12 ` [PATCH v8 07/10] common/sxe2: add ioctl interface for DMA map and unmap liujie5
2026-05-06 6:12 ` [PATCH v8 08/10] net/sxe2: support queue setup and control liujie5
2026-05-06 6:12 ` [PATCH v8 09/10] drivers: add data path for Rx and Tx liujie5
2026-05-06 6:12 ` [PATCH v8 10/10] net/sxe2: add vectorized " liujie5
2026-05-06 9:56 ` [PATCH v9 00/10] Add Linkdata sxe2 driver liujie5
2026-05-06 9:56 ` [PATCH v9 01/10] mailmap: add Jie Liu liujie5
2026-05-06 9:56 ` [PATCH v9 02/10] doc: add sxe2 guide and release notes liujie5
2026-05-06 9:56 ` [PATCH v9 03/10] drivers: add sxe2 basic structures liujie5
2026-05-06 9:56 ` [PATCH v9 04/10] common/sxe2: add base driver skeleton liujie5
2026-05-06 9:56 ` [PATCH v9 05/10] drivers: add base driver probe skeleton liujie5
2026-05-06 9:56 ` [PATCH v9 06/10] drivers: support PCI BAR mapping liujie5
2026-05-06 9:56 ` [PATCH v9 07/10] common/sxe2: add ioctl interface for DMA map and unmap liujie5
2026-05-06 9:57 ` [PATCH v9 08/10] net/sxe2: support queue setup and control liujie5
2026-05-06 9:57 ` [PATCH v9 09/10] drivers: add data path for Rx and Tx liujie5
2026-05-06 9:57 ` [PATCH v9 10/10] net/sxe2: add vectorized " liujie5
2026-05-06 11:35 ` [PATCH v10 00/10] Add Linkdata sxe2 driver liujie5
2026-05-06 11:35 ` [PATCH v10 01/10] mailmap: add Jie Liu liujie5
2026-05-06 11:35 ` [PATCH v10 02/10] doc: add sxe2 guide and release notes liujie5
2026-05-06 11:35 ` [PATCH v10 03/10] drivers: add sxe2 basic structures liujie5
2026-05-06 11:35 ` [PATCH v10 04/10] common/sxe2: add base driver skeleton liujie5
2026-05-06 11:35 ` [PATCH v10 05/10] drivers: add base driver probe skeleton liujie5
2026-05-06 11:35 ` [PATCH v10 06/10] drivers: support PCI BAR mapping liujie5
2026-05-06 11:35 ` [PATCH v10 07/10] common/sxe2: add ioctl interface for DMA map and unmap liujie5
2026-05-06 11:35 ` [PATCH v10 08/10] net/sxe2: support queue setup and control liujie5
2026-05-06 11:35 ` [PATCH v10 09/10] drivers: add data path for Rx and Tx liujie5
2026-05-06 11:35 ` [PATCH v10 10/10] net/sxe2: add vectorized " liujie5
2026-05-07 1:44 ` [PATCH v11 0/9] Add Linkdata sxe2 driver liujie5
2026-05-07 1:44 ` [PATCH v11 1/9] mailmap: add Jie Liu liujie5
2026-05-07 1:44 ` [PATCH v11 2/9] doc: add sxe2 guide and release notes liujie5
2026-05-07 1:44 ` [PATCH v11 3/9] drivers: add sxe2 basic structures liujie5
2026-05-07 1:44 ` [PATCH v11 4/9] common/sxe2: add base driver skeleton liujie5
2026-05-07 1:44 ` [PATCH v11 5/9] drivers: add base driver probe skeleton liujie5
2026-05-07 1:44 ` [PATCH v11 6/9] drivers: support PCI BAR mapping liujie5
2026-05-07 1:44 ` [PATCH v11 7/9] common/sxe2: add ioctl interface for DMA map and unmap liujie5
2026-05-07 1:44 ` [PATCH v11 8/9] net/sxe2: support queue setup and control liujie5
2026-05-07 1:44 ` [PATCH v11 9/9] drivers: add data path for Rx and Tx liujie5
2026-05-07 2:40 ` [PATCH v11 0/9] Add Linkdata sxe2 driver Stephen Hemminger
2026-05-12 8:06 ` liujie5 [this message]
2026-05-12 8:06 ` [PATCH v12 01/10] mailmap: add Jie Liu liujie5
2026-05-12 8:06 ` [PATCH v12 02/10] doc: add sxe2 guide and release notes liujie5
2026-05-12 8:06 ` [PATCH v12 03/10] common/sxe2: add sxe2 basic structures liujie5
2026-05-12 8:06 ` [PATCH v12 04/10] drivers: add base driver skeleton liujie5
2026-05-12 8:06 ` [PATCH v12 05/10] drivers: add base driver probe skeleton liujie5
2026-05-12 8:06 ` [PATCH v12 06/10] drivers: support PCI BAR mapping liujie5
2026-05-12 8:06 ` [PATCH v12 07/10] common/sxe2: add ioctl interface for DMA map and unmap liujie5
2026-05-12 8:06 ` [PATCH v12 08/10] net/sxe2: support queue setup and control liujie5
2026-05-12 8:06 ` [PATCH v12 09/10] drivers: add data path for Rx and Tx liujie5
2026-05-12 8:06 ` [PATCH v12 10/10] net/sxe2: add vectorized " liujie5
2026-05-12 11:36 ` [PATCH v13 00/10] net/sxe2: fix logic errors and address feedback liujie5
2026-05-12 11:36 ` [PATCH v13 01/10] mailmap: add Jie Liu liujie5
2026-05-12 11:36 ` [PATCH v13 02/10] doc: add sxe2 guide and release notes liujie5
2026-05-12 11:36 ` [PATCH v13 03/10] common/sxe2: add sxe2 basic structures liujie5
2026-05-12 11:36 ` [PATCH v13 04/10] drivers: add base driver skeleton liujie5
2026-05-12 11:36 ` [PATCH v13 05/10] drivers: add base driver probe skeleton liujie5
2026-05-12 11:36 ` [PATCH v13 06/10] drivers: support PCI BAR mapping liujie5
2026-05-12 11:36 ` [PATCH v13 07/10] common/sxe2: add ioctl interface for DMA map and unmap liujie5
2026-05-12 11:36 ` [PATCH v13 08/10] net/sxe2: support queue setup and control liujie5
2026-05-12 11:36 ` [PATCH v13 09/10] drivers: add data path for Rx and Tx liujie5
2026-05-12 11:36 ` [PATCH v13 10/10] net/sxe2: add vectorized " liujie5
2026-05-13 14:45 ` [PATCH v13 00/10] net/sxe2: fix logic errors and address feedback Stephen Hemminger
2026-05-07 0:23 ` [PATCH v10 00/10] Add Linkdata sxe2 driver Stephen Hemminger
2026-04-30 16:21 ` [PATCH v3 0/9] net/sxe2: added Linkdata sxe2 ethernet driver Stephen Hemminger
2026-04-30 17:02 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260512080616.454171-1-liujie5@linkdatatechnology.com \
--to=liujie5@linkdatatechnology.com \
--cc=dev@dpdk.org \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox