DPDK-dev Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: <pravin.bathija@dell.com>
To: <dev@dpdk.org>, <fengchengwen@huawei.com>,
	<stephen@networkplumber.org>, <maxime.coquelin@redhat.com>
Cc: <pravin.bathija@dell.com>, <thomas@monjalon.net>
Subject: [PATCH v13 0/5] Support add/remove memory region and get-max-slots
Date: Thu, 14 May 2026 02:01:52 +0000	[thread overview]
Message-ID: <20260514020157.1937404-1-pravin.bathija@dell.com> (raw)

From: Pravin M Bathija <pravin.bathija@dell.com>

This is version v13 of the patchset and it incorporates the
recommendations made by Fengcheng Wen.

Changes made to patch 3/5 and 4/5
* Relocated function remove_guest_pages from patch 3/5 to 4/5.
* Renamed VhostUserSingleMemReg to VhostUserMemRegMsg and memory_single
  to memreg.

This implementation has been extensively tested by doing Read/Write I/O
from multiple instances of fio + libblkio (front-end) talking to
spdk/dpdk (back-end) based drives. Tested with qemu front-end talking to
dpdk testpmd (back-end) performing add/removal of memory regions. Also
tested post-copy live migration after doing add_memory_region.

Version Log:
Version v13 (Current version): Incorporate code review suggestions from
Fengcheng Wen as described above.
Version v12: Incorporate code review suggestions from Maxime Coquelin
and ai-code-review.
Changes made to patch 3/5
Refactored async_dma_map() to delegate to async_dma_map_region(),
eliminating code duplication between the two functions.
Restored original comments in async_dma_map_region() explaining why
ENODEV and EINVAL errors are ignored (these were stripped in v10)
Reverted unnecessary changes to vhost_user_postcopy_register() --
removed the host_user_addr == 0 checks and reg_msg_index indirection
that were added in  v10, since this function is only called from
vhost_user_set_mem_table() where regions are always contiguous.

Version v11: Incorporate code review suggestions from Stephen Hemminger.
Change made to patch 4/5
Fix incomplete cleanup in vhost_user_add_mem_reg() when
vhost_user_mmap_region() fails after the mmap succeeds (e.g.
add_guest_pages() realloc failure) realloc failure). The error path now
calls remove_guest_pages() and free_mem_region() to undo the mapping
and stale guest-page entries, preventing a leaked mmap and slot reuse
corruption. The plain close(fd) path is kept for pre-mmap failures.

Version v10: Incorporate code review suggestions from Stephen Hemminger.
Change made to patch 4/5
Moved dev_invalidate_vrings after free_mem_region, array compaction, and
nregions decrement. This ensures translate_ring_addresses only sees
surviving memory regions, preventing vring pointers from resolving into
a region that is about to be unmapped.

Version v9: Incorporate code review suggestions from Stephen Hemminger.
Changes made to patch 3/5
Restored max_guest_pages initial value to hardcoded 8 instead of
VHOST_MEMORY_MAX_NREGIONS, matching upstream semantics.
Changes made to patch 4/5
Added close(reg->fd) and reg->fd = -1 before goto close_msg_fds in the
mmap failure path to fix fd leak after fd was moved from ctx->fds[0].
Converted dev_invalidate_vrings from a plain function to a macro +
implementation function pair, accepting message ID as a parameter so
the static_assert reports the correct handler at each call site.
Updated dev_invalidate_vrings call in add_mem_reg to pass
VHOST_USER_ADD_MEM_REG as message ID.
Updated dev_invalidate_vrings call in rem_mem_reg to pass
VHOST_USER_REM_MEM_REG as message ID.

Version v8:  Incorporate code review suggestions from Stephen Hemminger.
rewrite async_dma_map_region function to iterate guest pages by host
address range matching
change function dev_invalidate_vrings to accept a double pointer to
propagate pointer updates
new function remove_guest_pages was added
add_mem_reg error path was narrowed to only clean up the single failed
region instead of destroting all existing regions

Version v7: Incorporate code review suggestions from Maxime Coquelin.
Add debug messages to vhost_postcopy_register function.

Version v6: Added the enablement of this feature as a final patch in
this patch-set and other code optimizations as suggested by Maxime
Coquelin.

Version v5: removed the patch that increased the number of memory regions
from 8 to 128. This will be submitted as a separate feature at a later
point after incorporating additional optimizations. Also includes code
optimizations as suggested by Feng Cheng Wen.

Version v4: code optimizations as suggested by Feng Cheng Wen.

Version v3: code optimizations as suggested by Maxime Coquelin
and Thomas Monjalon.

Version v2: code optimizations as suggested by Maxime Coquelin.

Version v1: Initial patch set.

Pravin M Bathija (5):
  vhost: add user to mailmap and define to vhost hdr
  vhost_user: header defines for add/rem mem region
  vhost_user: support function defines for back-end
  vhost_user: Function defs for add/rem mem regions
  vhost_user: enable configure memory slots

 .mailmap               |   1 +
 lib/vhost/rte_vhost.h  |   4 +
 lib/vhost/vhost_user.c | 418 +++++++++++++++++++++++++++++++++++------
 lib/vhost/vhost_user.h |  10 +
 4 files changed, 371 insertions(+), 62 deletions(-)

-- 
2.43.0


             reply	other threads:[~2026-05-14  2:02 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-14  2:01 pravin.bathija [this message]
2026-05-14  2:01 ` [PATCH v13 1/5] vhost: add user to mailmap and define to vhost hdr pravin.bathija
2026-05-14  2:01 ` [PATCH v13 2/5] vhost_user: header defines for add/rem mem region pravin.bathija
2026-05-14  2:01 ` [PATCH v13 3/5] vhost_user: support function defines for back-end pravin.bathija
2026-05-14  2:01 ` [PATCH v13 4/5] vhost_user: Function defs for add/rem mem regions pravin.bathija
2026-05-14  2:01 ` [PATCH v13 5/5] vhost_user: enable configure memory slots pravin.bathija
2026-05-16  2:55   ` [PATCH v14 00/11] net/sxe2: fix logic errors and address feedback liujie5
2026-05-16  2:55     ` [PATCH v14 01/11] mailmap: add Jie Liu liujie5
2026-05-16  2:55     ` [PATCH v14 02/11] doc: add sxe2 guide and release notes liujie5
2026-05-16  2:55     ` [PATCH v14 03/11] common/sxe2: add sxe2 basic structures liujie5
2026-05-16  2:55     ` [PATCH v14 04/11] drivers: add base driver skeleton liujie5
2026-05-16  2:55     ` [PATCH v14 05/11] drivers: add base driver probe skeleton liujie5
2026-05-16  2:55     ` [PATCH v14 06/11] drivers: support PCI BAR mapping liujie5
2026-05-16  2:55     ` [PATCH v14 07/11] common/sxe2: add ioctl interface for DMA map and unmap liujie5
2026-05-16  2:55     ` [PATCH v14 08/11] net/sxe2: support queue setup and control liujie5
2026-05-16  2:55     ` [PATCH v14 09/11] drivers: add data path for Rx and Tx liujie5
2026-05-16  2:55     ` [PATCH v14 10/11] net/sxe2: add vectorized " liujie5
2026-05-16  2:55     ` [PATCH v14 11/11] net/sxe2: implement Tx done cleanup liujie5
2026-05-16  7:46       ` [PATCH v15 00/11] net/sxe2: fix logic errors and address feedback liujie5
2026-05-16  7:46         ` [PATCH v15 01/11] mailmap: add Jie Liu liujie5
2026-05-16  7:46         ` [PATCH v15 02/11] doc: add sxe2 guide and release notes liujie5
2026-05-16  7:46         ` [PATCH v15 03/11] common/sxe2: add sxe2 basic structures liujie5
2026-05-16  7:46         ` [PATCH v15 04/11] drivers: add base driver skeleton liujie5
2026-05-16  7:46         ` [PATCH v15 05/11] drivers: add base driver probe skeleton liujie5
2026-05-16  7:46         ` [PATCH v15 06/11] drivers: support PCI BAR mapping liujie5
2026-05-16  7:46         ` [PATCH v15 07/11] common/sxe2: add ioctl interface for DMA map and unmap liujie5
2026-05-16  7:46         ` [PATCH v15 08/11] net/sxe2: support queue setup and control liujie5
2026-05-16  7:46         ` [PATCH v15 09/11] drivers: add data path for Rx and Tx liujie5
2026-05-16  7:46         ` [PATCH v15 10/11] net/sxe2: add vectorized " liujie5
2026-05-16  7:46         ` [PATCH v15 11/11] net/sxe2: implement Tx done cleanup liujie5
  -- strict thread matches above, loose matches on Subject: below --
2026-05-14 22:46 [PATCH v13 0/5] Support add/remove memory region and get-max-slots pravin.bathija

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260514020157.1937404-1-pravin.bathija@dell.com \
    --to=pravin.bathija@dell.com \
    --cc=dev@dpdk.org \
    --cc=fengchengwen@huawei.com \
    --cc=maxime.coquelin@redhat.com \
    --cc=stephen@networkplumber.org \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox