DPDK-dev Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Maxime Leroy <maxime@leroys.fr>
To: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Cc: dev@dpdk.org, stable@dpdk.org, Maxime Leroy <maxime@leroys.fr>
Subject: [PATCH v1 2/5] test/fib6: add reproducer for tbl8 reservation drift
Date: Fri, 22 May 2026 16:58:51 +0200	[thread overview]
Message-ID: <20260522145855.1748406-3-maxime@leroys.fr> (raw)
In-Reply-To: <20260522145855.1748406-1-maxime@leroys.fr>

test_drift covers the asymmetric ADD parent / ADD children / DEL
parent / DEL children sequence that wraps rsvd_tbl8s past zero in a
single iteration. After the wrap the next /25+ ADD is rejected with
-ENOSPC even though the tbl8 pool is empty. With the preceding fix
in place the final ADD succeeds.

Signed-off-by: Maxime Leroy <maxime@leroys.fr>
---
 app/test/test_fib6.c | 74 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 74 insertions(+)

diff --git a/app/test/test_fib6.c b/app/test/test_fib6.c
index fffb590dbf..c4283f3f2d 100644
--- a/app/test/test_fib6.c
+++ b/app/test/test_fib6.c
@@ -25,6 +25,7 @@ static int32_t test_get_invalid(void);
 static int32_t test_lookup(void);
 static int32_t test_invalid_rcu(void);
 static int32_t test_fib_rcu_sync_rw(void);
+static int32_t test_drift(void);
 
 #define MAX_ROUTES	(1 << 16)
 /** Maximum number of tbl8 for 2-byte entries */
@@ -599,6 +600,78 @@ test_fib_rcu_sync_rw(void)
 	return status == 0 ? TEST_SUCCESS : TEST_FAILED;
 }
 
+/*
+ * Reproducer for the rsvd_tbl8s drift bug. depth_diff used to maintain
+ * rsvd_tbl8s is computed from the current RIB state, so it is not
+ * invariant between the ADD of a prefix and its later DEL when a
+ * covering parent prefix is removed in between.
+ *
+ * Layout: one /28 parent (fcde::/28) and three /48 siblings under it
+ * (fcde:0:6000::/48, fcde:1:6000::/48, fcde:2:6000::/48). The second
+ * hextet's high 12 bits are zero, so the three /48 IPs all fall inside
+ * the /28.
+ *
+ * One asymmetric sequence is enough to wrap the counter:
+ *   ADD /28                                  rsvd_tbl8s += 1
+ *   ADD /48 child_0,1,2 (with /28 parent)    rsvd_tbl8s += 2 each (+6)
+ *   DEL /28 (sibling /48 found)              rsvd_tbl8s -= 0
+ *   DEL /48 child_0,1,2 (no parent left)     rsvd_tbl8s -= 3 each (-9)
+ */
+static int32_t
+test_drift(void)
+{
+	struct rte_fib6_conf config = { 0 };
+	struct rte_fib6 *fib;
+	struct rte_ipv6_addr parent =
+		RTE_IPV6(0xfcde, 0, 0, 0, 0, 0, 0, 0);
+	struct rte_ipv6_addr child[3] = {
+		RTE_IPV6(0xfcde, 0, 0x6000, 0, 0, 0, 0, 0),
+		RTE_IPV6(0xfcde, 1, 0x6000, 0, 0, 0, 0, 0),
+		RTE_IPV6(0xfcde, 2, 0x6000, 0, 0, 0, 0, 0),
+	};
+	unsigned int c;
+	int ret;
+
+	config.max_routes = 1024;
+	config.rib_ext_sz = 0;
+	config.default_nh = 0;
+	config.type = RTE_FIB6_TRIE;
+	config.trie.nh_sz = RTE_FIB6_TRIE_2B;
+	config.trie.num_tbl8 = 256;
+
+	fib = rte_fib6_create(__func__, SOCKET_ID_ANY, &config);
+	RTE_TEST_ASSERT(fib != NULL, "Failed to create FIB\n");
+
+	ret = rte_fib6_add(fib, &parent, 28, 0xa);
+	RTE_TEST_ASSERT(ret == 0, "ADD /28 failed (ret=%d)\n", ret);
+
+	for (c = 0; c < 3; c++) {
+		ret = rte_fib6_add(fib, &child[c], 48, 0xb + c);
+		RTE_TEST_ASSERT(ret == 0,
+			"ADD /48 child %u failed (ret=%d)\n", c, ret);
+	}
+
+	ret = rte_fib6_delete(fib, &parent, 28);
+	RTE_TEST_ASSERT(ret == 0, "DEL /28 failed (ret=%d)\n", ret);
+
+	for (c = 0; c < 3; c++) {
+		ret = rte_fib6_delete(fib, &child[c], 48);
+		RTE_TEST_ASSERT(ret == 0,
+			"DEL /48 child %u failed (ret=%d)\n", c, ret);
+	}
+
+	/* Pre-fix: -ENOSPC. Post-fix: succeeds. */
+	ret = rte_fib6_add(fib, &parent, 28, 0xe);
+	RTE_TEST_ASSERT(ret == 0,
+		"Fresh ADD /28 spuriously failed (ret=%d)\n", ret);
+
+	ret = rte_fib6_delete(fib, &parent, 28);
+	RTE_TEST_ASSERT(ret == 0, "Final DEL /28 failed (ret=%d)\n", ret);
+
+	rte_fib6_free(fib);
+	return TEST_SUCCESS;
+}
+
 static struct unit_test_suite fib6_fast_tests = {
 	.suite_name = "fib6 autotest",
 	.setup = NULL,
@@ -611,6 +684,7 @@ static struct unit_test_suite fib6_fast_tests = {
 	TEST_CASE(test_lookup),
 	TEST_CASE(test_invalid_rcu),
 	TEST_CASE(test_fib_rcu_sync_rw),
+	TEST_CASE(test_drift),
 	TEST_CASES_END()
 	}
 };
-- 
2.43.0


  parent reply	other threads:[~2026-05-22 14:59 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-07  9:50 [RFC 0/3] fib: tbl8 reservation drift reproducer and proposed fix Maxime Leroy
2026-05-07  9:50 ` [RFC 1/3] fib6: fix tbl8 reservation drift in trie Maxime Leroy
2026-05-07  9:50 ` [RFC 2/3] test/fib6: add reproducer for tbl8 reservation drift Maxime Leroy
2026-05-07  9:50 ` [RFC 3/3] fib: drop redundant tbl8 reservation counter Maxime Leroy
2026-05-07 19:02 ` [RFC 0/3] fib: tbl8 reservation drift reproducer and proposed fix Stephen Hemminger
2026-05-11  7:29   ` Maxime Leroy
2026-05-22 14:58 ` [PATCH v1 0/5] fib6: fix tbl8 reservation drift Maxime Leroy
2026-05-22 14:58   ` [PATCH v1 1/5] fib6: fix tbl8 reservation drift in trie Maxime Leroy
2026-06-05 13:03     ` [PATCH 1/3] " Vladimir Medvedkin
2026-05-22 14:58   ` Maxime Leroy [this message]
2026-05-22 14:58   ` [PATCH v1 3/5] test/fib6: extended drift test cases Maxime Leroy
2026-05-22 14:58   ` [PATCH v1 4/5] rib: track valid descendant count per node Maxime Leroy
2026-05-22 14:58   ` [PATCH v1 5/5] fib6: speed up tbl8 reservation accounting Maxime Leroy
2026-06-05 13:04   ` [PATCH v1 0/5] fib6: fix tbl8 reservation drift Medvedkin, Vladimir
2026-06-17  8:23   ` [PATCH v2 0/3] " Maxime Leroy
2026-06-17  8:23     ` [PATCH v2 1/3] fib6: fix tbl8 reservation drift in trie Maxime Leroy
2026-06-17  8:23     ` [PATCH v2 2/3] test/fib6: add reproducer for tbl8 reservation drift Maxime Leroy
2026-06-17  8:24     ` [PATCH v2 3/3] test/fib6: extended drift test cases Maxime Leroy
2026-07-01 10:27     ` [PATCH v2 0/3] fib6: fix tbl8 reservation drift David Marchand

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260522145855.1748406-3-maxime@leroys.fr \
    --to=maxime@leroys.fr \
    --cc=dev@dpdk.org \
    --cc=stable@dpdk.org \
    --cc=vladimir.medvedkin@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox