From: Zaiyu Wang <zaiyuwang@trustnetic.com>
To: dev@dpdk.org
Cc: Zaiyu Wang <zaiyuwang@trustnetic.com>,
Jiawen Wu <jiawenwu@trustnetic.com>
Subject: [PATCH v2 2/4] net/txgbe: add USO support
Date: Wed, 17 Jun 2026 19:33:32 +0800 [thread overview]
Message-ID: <20260617113335.15648-3-zaiyuwang@trustnetic.com> (raw)
In-Reply-To: <20260617113335.15648-1-zaiyuwang@trustnetic.com>
USO (UDP Segmentation Offload), also known as UFO (UDP Fragmentation
Offload), is a hardware offload rarely seen in DPDK. Its implementation
is similar to TSO (TCP Segmentation Offload), so the driver enables
USO based on existing TSO support.
Note:
USO segments UDP packets, requiring hardware to recalculate both IP
and UDP checksums due to length change. Thus, USO implicitly requires
IP and UDP checksum offloads, same as TSO.
Signed-off-by: Zaiyu Wang <zaiyuwang@trustnetic.com>
---
drivers/net/txgbe/txgbe_rxtx.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/net/txgbe/txgbe_rxtx.c b/drivers/net/txgbe/txgbe_rxtx.c
index e2cd9b8841..c4cbdbc2b4 100644
--- a/drivers/net/txgbe/txgbe_rxtx.c
+++ b/drivers/net/txgbe/txgbe_rxtx.c
@@ -58,6 +58,7 @@ static const u64 TXGBE_TX_OFFLOAD_MASK = (RTE_MBUF_F_TX_IP_CKSUM |
RTE_MBUF_F_TX_VLAN |
RTE_MBUF_F_TX_L4_MASK |
RTE_MBUF_F_TX_TCP_SEG |
+ RTE_MBUF_F_TX_UDP_SEG |
RTE_MBUF_F_TX_TUNNEL_MASK |
RTE_MBUF_F_TX_OUTER_IP_CKSUM |
RTE_MBUF_F_TX_OUTER_UDP_CKSUM |
@@ -367,7 +368,7 @@ txgbe_set_xmit_ctx(struct txgbe_tx_queue *txq,
type_tucmd_mlhl |= TXGBE_TXD_PTID(tx_offload.ptid);
/* check if TCP segmentation required for this packet */
- if (ol_flags & RTE_MBUF_F_TX_TCP_SEG) {
+ if (ol_flags & (RTE_MBUF_F_TX_TCP_SEG | RTE_MBUF_F_TX_UDP_SEG)) {
tx_offload_mask.l2_len |= ~0;
tx_offload_mask.l3_len |= ~0;
tx_offload_mask.l4_len |= ~0;
@@ -517,7 +518,7 @@ tx_desc_cksum_flags_to_olinfo(uint64_t ol_flags)
tmp |= TXGBE_TXD_CC;
tmp |= TXGBE_TXD_EIPCS;
}
- if (ol_flags & RTE_MBUF_F_TX_TCP_SEG) {
+ if (ol_flags & (RTE_MBUF_F_TX_TCP_SEG | RTE_MBUF_F_TX_UDP_SEG)) {
tmp |= TXGBE_TXD_CC;
/* implies IPv4 cksum */
if (ol_flags & RTE_MBUF_F_TX_IPV4)
@@ -537,7 +538,7 @@ tx_desc_ol_flags_to_cmdtype(uint64_t ol_flags)
if (ol_flags & RTE_MBUF_F_TX_VLAN)
cmdtype |= TXGBE_TXD_VLE;
- if (ol_flags & RTE_MBUF_F_TX_TCP_SEG)
+ if (ol_flags & (RTE_MBUF_F_TX_TCP_SEG | RTE_MBUF_F_TX_UDP_SEG))
cmdtype |= TXGBE_TXD_TSE;
if (ol_flags & RTE_MBUF_F_TX_MACSEC)
cmdtype |= TXGBE_TXD_LINKSEC;
@@ -587,6 +588,8 @@ tx_desc_ol_flags_to_ptype(uint64_t oflags)
if (oflags & RTE_MBUF_F_TX_TCP_SEG)
ptype |= (tun ? RTE_PTYPE_INNER_L4_TCP : RTE_PTYPE_L4_TCP);
+ else if (oflags & RTE_MBUF_F_TX_UDP_SEG)
+ ptype |= (tun ? RTE_PTYPE_INNER_L4_UDP : RTE_PTYPE_L4_UDP);
/* Tunnel */
switch (oflags & RTE_MBUF_F_TX_TUNNEL_MASK) {
@@ -1071,7 +1074,7 @@ txgbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
olinfo_status = 0;
if (tx_ol_req) {
- if (ol_flags & RTE_MBUF_F_TX_TCP_SEG) {
+ if (ol_flags & (RTE_MBUF_F_TX_TCP_SEG | RTE_MBUF_F_TX_UDP_SEG)) {
/* when TSO is on, paylen in descriptor is the
* not the packet len but the tcp payload len
*/
@@ -2389,7 +2392,7 @@ txgbe_get_tx_port_offloads(struct rte_eth_dev *dev)
RTE_ETH_TX_OFFLOAD_TCP_CKSUM |
RTE_ETH_TX_OFFLOAD_SCTP_CKSUM |
RTE_ETH_TX_OFFLOAD_TCP_TSO |
- RTE_ETH_TX_OFFLOAD_UDP_TSO |
+ RTE_ETH_TX_OFFLOAD_UDP_TSO |
RTE_ETH_TX_OFFLOAD_UDP_TNL_TSO |
RTE_ETH_TX_OFFLOAD_IP_TNL_TSO |
RTE_ETH_TX_OFFLOAD_VXLAN_TNL_TSO |
--
2.21.0.windows.1
next prev parent reply other threads:[~2026-06-17 11:33 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-17 10:59 [PATCH 0/4] Wangxun new feature Zaiyu Wang
2026-06-17 10:59 ` [PATCH 1/4] net/ngbe: add USO support Zaiyu Wang
2026-06-17 10:59 ` [PATCH 2/4] net/txgbe: " Zaiyu Wang
2026-06-17 10:59 ` [PATCH 3/4] net/txgbe: add support for VF sensing PF down Zaiyu Wang
2026-06-17 10:59 ` [PATCH 4/4] net/txgbe: add VF support for Amber-Lite 40G NIC Zaiyu Wang
2026-06-17 11:33 ` [PATCH v2 0/4] Wangxun new feature Zaiyu Wang
2026-06-17 11:33 ` [PATCH v2 1/4] net/ngbe: add USO support Zaiyu Wang
2026-06-17 11:33 ` Zaiyu Wang [this message]
2026-06-17 11:33 ` [PATCH v2 3/4] net/txgbe: add support for VF sensing PF down Zaiyu Wang
2026-06-17 11:33 ` [PATCH v2 4/4] net/txgbe: add VF support for Amber-Lite 40G NIC Zaiyu Wang
2026-06-17 15:36 ` [PATCH 0/4] Wangxun new feature Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260617113335.15648-3-zaiyuwang@trustnetic.com \
--to=zaiyuwang@trustnetic.com \
--cc=dev@dpdk.org \
--cc=jiawenwu@trustnetic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox