From: "Morten Brørup" <mb@smartsharesystems.com>
To: dev@dpdk.org, Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>,
Jie Liu <liujie5@linkdatatechnology.com>
Cc: "Morten Brørup" <mb@smartsharesystems.com>
Subject: [PATCH] mempool: remove cache flush threshold
Date: Fri, 24 Jul 2026 12:07:47 +0000 [thread overview]
Message-ID: <20260724120747.33981-1-mb@smartsharesystems.com> (raw)
mempool: remove cache flush threshold
Removed the mempool cache flush threshold field (``flushthresh``),
which was obsolete and marked for removal.
Reduced the size of the mempool cache objects array; it was double the
required size.
Also fixed a couple of commments.
The sxe2 driver was updated to use the ``size`` field instead of the
``flushthresh`` field; it contains the same value.
Signed-off-by: Morten Brørup <mb@smartsharesystems.com>
---
doc/guides/rel_notes/release_26_11.rst | 5 +++++
drivers/net/sxe2/sxe2_txrx_vec_avx512.c | 2 +-
lib/mempool/mempool_trace.h | 1 -
lib/mempool/rte_mempool.c | 5 ++---
lib/mempool/rte_mempool.h | 15 ++++-----------
5 files changed, 12 insertions(+), 16 deletions(-)
diff --git a/doc/guides/rel_notes/release_26_11.rst b/doc/guides/rel_notes/release_26_11.rst
index 938617ca75..8a109cae56 100644
--- a/doc/guides/rel_notes/release_26_11.rst
+++ b/doc/guides/rel_notes/release_26_11.rst
@@ -100,6 +100,11 @@ ABI Changes
Also, make sure to start the actual text at the margin.
=======================================================
+* mempool: The structure ``rte_mempool_cache`` was updated as follows:
+ - The obsolete ``flushthresh`` field was removed.
+ - The size of the ``objs`` array was reduced from ``RTE_MEMPOOL_CACHE_MAX_SIZE`` * 2 to ``RTE_MEMPOOL_CACHE_MAX_SIZE``.
+ - A cache guard was added at the end of the structure.
+
Known Issues
------------
diff --git a/drivers/net/sxe2/sxe2_txrx_vec_avx512.c b/drivers/net/sxe2/sxe2_txrx_vec_avx512.c
index a830c7a33b..2e680f4027 100644
--- a/drivers/net/sxe2/sxe2_txrx_vec_avx512.c
+++ b/drivers/net/sxe2/sxe2_txrx_vec_avx512.c
@@ -67,7 +67,7 @@ static __rte_always_inline int32_t sxe2_tx_bufs_free_vec_avx512(struct sxe2_tx_q
}
cache->len += rs_thresh;
- if (cache->len >= cache->flushthresh) {
+ if (cache->len >= cache->size) {
(void)rte_mempool_ops_enqueue_bulk(mp,
&cache->objs[cache->size], cache->len - cache->size);
cache->len = cache->size;
diff --git a/lib/mempool/mempool_trace.h b/lib/mempool/mempool_trace.h
index 23cda1473c..60e47cf67b 100644
--- a/lib/mempool/mempool_trace.h
+++ b/lib/mempool/mempool_trace.h
@@ -119,7 +119,6 @@ RTE_TRACE_POINT(
rte_trace_point_emit_i32(socket_id);
rte_trace_point_emit_ptr(cache);
rte_trace_point_emit_u32(cache->len);
- rte_trace_point_emit_u32(cache->flushthresh);
)
RTE_TRACE_POINT(
diff --git a/lib/mempool/rte_mempool.c b/lib/mempool/rte_mempool.c
index 817e2b8dc1..4a79a4c800 100644
--- a/lib/mempool/rte_mempool.c
+++ b/lib/mempool/rte_mempool.c
@@ -753,7 +753,6 @@ static void
mempool_cache_init(struct rte_mempool_cache *cache, uint32_t size)
{
cache->size = size;
- cache->flushthresh = size; /* Obsolete; for API/ABI compatibility purposes only */
cache->len = 0;
}
@@ -1197,6 +1196,7 @@ mempool_obj_audit(struct rte_mempool *mp, __rte_unused void *opaque,
RTE_MEMPOOL_CHECK_COOKIES(mp, &obj, 1, 2);
}
+/* check cookies before and after objects */
static void
mempool_audit_cookies(struct rte_mempool *mp)
{
@@ -1213,11 +1213,10 @@ mempool_audit_cookies(struct rte_mempool *mp)
#define mempool_audit_cookies(mp) do {} while(0)
#endif
-/* check cookies before and after objects */
+/* check cache size consistency */
static void
mempool_audit_cache(const struct rte_mempool *mp)
{
- /* check cache size consistency */
unsigned lcore_id;
if (mp->cache_size == 0)
diff --git a/lib/mempool/rte_mempool.h b/lib/mempool/rte_mempool.h
index 50d958c7c6..b531c8cbb5 100644
--- a/lib/mempool/rte_mempool.h
+++ b/lib/mempool/rte_mempool.h
@@ -89,14 +89,13 @@ struct __rte_cache_aligned rte_mempool_debug_stats {
*/
struct __rte_cache_aligned rte_mempool_cache {
uint32_t size; /**< Size of the cache */
- uint32_t flushthresh; /**< Obsolete; for API/ABI compatibility purposes only */
uint32_t len; /**< Current cache count */
#ifdef RTE_LIBRTE_MEMPOOL_STATS
- uint32_t unused;
/*
* Alternative location for the most frequently updated mempool statistics (per-lcore),
* providing faster update access when using a mempool cache.
*/
+ alignas(16)
struct {
uint64_t put_bulk; /**< Number of puts. */
uint64_t put_objs; /**< Number of objects successfully put. */
@@ -104,15 +103,9 @@ struct __rte_cache_aligned rte_mempool_cache {
uint64_t get_success_objs; /**< Objects successfully allocated. */
} stats; /**< Statistics */
#endif
- /**
- * Cache objects
- *
- * Note:
- * Cache is allocated at double size for API/ABI compatibility purposes only.
- * When reducing its size at an API/ABI breaking release,
- * remember to add a cache guard after it.
- */
- alignas(RTE_CACHE_LINE_SIZE) void *objs[RTE_MEMPOOL_CACHE_MAX_SIZE * 2];
+ /** Cache objects */
+ alignas(RTE_CACHE_LINE_SIZE) void *objs[RTE_MEMPOOL_CACHE_MAX_SIZE];
+ RTE_CACHE_GUARD;
};
/**
--
2.43.0
next reply other threads:[~2026-07-24 12:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-24 12:07 Morten Brørup [this message]
2026-07-24 13:35 ` [PATCH] mempool: remove cache flush threshold Andrew Rybchenko
2026-07-24 15:14 ` [PATCH v2] mempool: remove cache flush threshold field Morten Brørup
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260724120747.33981-1-mb@smartsharesystems.com \
--to=mb@smartsharesystems.com \
--cc=andrew.rybchenko@oktetlabs.ru \
--cc=dev@dpdk.org \
--cc=liujie5@linkdatatechnology.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox