[PATCH 1/6] crypto/dpaa2_sec: fix buffer overflow in GCM decrypt

[Gagandeep Singh <g.singh@nxp.com>]

In build_authenc_gcm_fd, when both AAD (auth_only_len > 0) and decrypt
direction are active, the SGE layout occupies 8 entries plus 16 bytes of
old_icv storage at index 8. The FLE pool buffer was only 256 bytes
(8 x 32), causing old_icv to be written one entry past the end of the
allocated buffer. The resulting virtual address was not mapped by the
IOMMU, so DPAA2_VADDR_TO_IOVA returned 0 and the SEC engine received
iova=0x00000000 as the ICV buffer address, triggering an SMMU
translation fault (FSR=0x402 TF).

Additionally, the upfront bpid/IVP initialization only covered sge+3,
leaving sge+4 (the input data SGE when AAD is present) without a valid
bpid or IVP assignment.

Increase FLE_POOL_BUF_SIZE from 256 to 288 (9 x 32 bytes) to
accommodate the full layout, and extend the bpid/IVP initialization
to cover sge+4 in both branches of build_authenc_gcm_fd.

Fixes: 13273250ee ("crypto/dpaa2_sec: support AES-GCM and CTR")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
---
 drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c | 2 ++
 drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h   | 2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
index 3d980d096f..2a015a3d82 100644
--- a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
+++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
@@ -569,6 +569,7 @@ build_authenc_gcm_fd(dpaa2_sec_session *sess,
 		DPAA2_SET_FLE_BPID(sge + 1, bpid);
 		DPAA2_SET_FLE_BPID(sge + 2, bpid);
 		DPAA2_SET_FLE_BPID(sge + 3, bpid);
+		DPAA2_SET_FLE_BPID(sge + 4, bpid);
 	} else {
 		DPAA2_SET_FD_IVP(fd);
 		DPAA2_SET_FLE_IVP(fle);
@@ -577,6 +578,7 @@ build_authenc_gcm_fd(dpaa2_sec_session *sess,
 		DPAA2_SET_FLE_IVP((sge + 1));
 		DPAA2_SET_FLE_IVP((sge + 2));
 		DPAA2_SET_FLE_IVP((sge + 3));
+		DPAA2_SET_FLE_IVP((sge + 4));
 	}
 
 	/* Save the shared descriptor */
diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h b/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h
index 755c8e9cc3..ff32f3d860 100644
--- a/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h
+++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h
@@ -17,7 +17,7 @@ extern uint8_t cryptodev_driver_id;
 
 /* FLE_POOL_NUM_BUFS is set as per the ipsec-secgw application */
 #define FLE_POOL_NUM_BUFS	32000
-#define FLE_POOL_BUF_SIZE	256
+#define FLE_POOL_BUF_SIZE	288
 #define FLE_POOL_CACHE_SIZE	512
 #define FLE_SG_MEM_SIZE(num)	(FLE_POOL_BUF_SIZE + ((num) * 32))
 
-- 
2.25.1