From: Gagandeep Singh <g.singh@nxp.com>
To: dev@dpdk.org
Cc: hemant.agrawal@nxp.com, Gagandeep Singh <g.singh@nxp.com>,
Prashant Gupta <prashant.gupta_3@nxp.com>
Subject: [PATCH v3 5/5] dma/imx_edma5: add statistics and dump
Date: Tue, 11 Aug 2026 16:19:33 +0530 [thread overview]
Message-ID: <20260811104933.3843522-6-g.singh@nxp.com> (raw)
In-Reply-To: <20260811104933.3843522-1-g.singh@nxp.com>
Add per-vchan statistics, virtual channel status reporting and a device
dump callback to the eDMA5 dmadev.
stats_get and stats_reset expose the submitted, completed and error
counters maintained by the data path, supporting both a single vchan and
the RTE_DMA_ALL_VCHAN aggregate. vchan_status reports whether a channel is
idle, active or halted on an unreaped error by inspecting the outstanding
jobs in the software ring. dev_dump prints the device and per-vchan
software state to aid debugging.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Prashant Gupta <prashant.gupta_3@nxp.com>
---
drivers/dma/imx_edma5/imx_edma5_dmadev.c | 126 +++++++++++++++++++++++
1 file changed, 126 insertions(+)
diff --git a/drivers/dma/imx_edma5/imx_edma5_dmadev.c b/drivers/dma/imx_edma5/imx_edma5_dmadev.c
index 82eb1c87cb..0793c9aa7a 100644
--- a/drivers/dma/imx_edma5/imx_edma5_dmadev.c
+++ b/drivers/dma/imx_edma5/imx_edma5_dmadev.c
@@ -929,6 +929,126 @@ imx_edma5_burst_capacity(const void *dev_private, uint16_t vchan)
return vc->nb_desc - 1 - vc->nb_enqueued;
}
+static int
+imx_edma5_vchan_status(const struct rte_dma_dev *dev, uint16_t vchan,
+ enum rte_dma_vchan_status *status)
+{
+ const struct imx_edma5_dev *ed = dev->data->dev_private;
+ const struct imx_edma5_vchan *vc = &ed->vchans[vchan];
+ uint16_t idx;
+
+ /*
+ * HALTED_ERROR if an errored job is still unreaped, ACTIVE while any job
+ * is outstanding (not done, or enqueued but not submitted), else IDLE.
+ */
+ *status = RTE_DMA_VCHAN_IDLE;
+
+ for (idx = vc->tail; idx != vc->head; idx = (idx + 1) & vc->desc_mask) {
+ const struct imx_edma5_job *job = &vc->jobs[idx];
+
+ if (job->submitted && job->done && job->error) {
+ *status = RTE_DMA_VCHAN_HALTED_ERROR;
+ break;
+ }
+
+ if (!job->submitted || !job->done) {
+ *status = RTE_DMA_VCHAN_ACTIVE;
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static int
+imx_edma5_stats_get(const struct rte_dma_dev *dev, uint16_t vchan,
+ struct rte_dma_stats *stats, uint32_t stats_sz)
+{
+ const struct imx_edma5_dev *ed = dev->data->dev_private;
+
+ RTE_SET_USED(stats_sz);
+
+ stats->submitted = 0;
+ stats->completed = 0;
+ stats->errors = 0;
+
+ /* RTE_DMA_ALL_VCHAN requests the aggregate across every vchan. */
+ if (vchan == RTE_DMA_ALL_VCHAN) {
+ uint16_t i;
+
+ for (i = 0; i < ed->nb_vchans; i++) {
+ const struct imx_edma5_vchan *vc = &ed->vchans[i];
+
+ stats->submitted += vc->submitted_count;
+ stats->completed += vc->completed_count;
+ stats->errors += vc->errors_count;
+ }
+ } else if (vchan < ed->nb_vchans) {
+ const struct imx_edma5_vchan *vc = &ed->vchans[vchan];
+
+ stats->submitted = vc->submitted_count;
+ stats->completed = vc->completed_count;
+ stats->errors = vc->errors_count;
+ }
+
+ return 0;
+}
+
+static int
+imx_edma5_stats_reset(struct rte_dma_dev *dev, uint16_t vchan)
+{
+ struct imx_edma5_dev *ed = dev->data->dev_private;
+
+ /* RTE_DMA_ALL_VCHAN requests a reset of every vchan. */
+ if (vchan == RTE_DMA_ALL_VCHAN) {
+ uint16_t i;
+
+ for (i = 0; i < ed->nb_vchans; i++) {
+ struct imx_edma5_vchan *vc = &ed->vchans[i];
+
+ vc->submitted_count = 0;
+ vc->completed_count = 0;
+ vc->errors_count = 0;
+ }
+ } else if (vchan < ed->nb_vchans) {
+ struct imx_edma5_vchan *vc = &ed->vchans[vchan];
+
+ vc->submitted_count = 0;
+ vc->completed_count = 0;
+ vc->errors_count = 0;
+ }
+
+ return 0;
+}
+
+static int
+imx_edma5_dump(const struct rte_dma_dev *dev, FILE *f)
+{
+ const struct imx_edma5_dev *ed = dev->data->dev_private;
+ uint16_t i;
+
+ fprintf(f, " imx_edma5 nb_channels=%u nb_vchans=%u\n",
+ ed->nb_channels, ed->nb_vchans);
+ for (i = 0; i < ed->nb_vchans; i++) {
+ const struct imx_edma5_vchan *vc = &ed->vchans[i];
+
+ fprintf(f,
+ " vchan %u: hw_chan=%u nb_desc=%u enqueued=%u "
+ "submitted=%" PRIu64 " completed=%" PRIu64
+ " errors=%" PRIu64 "\n",
+ i, vc->hw_chan, vc->nb_desc, vc->nb_enqueued,
+ vc->submitted_count, vc->completed_count,
+ vc->errors_count);
+ /* Hardware register snapshot for debug (CH_CSR, CH_ES). */
+ fprintf(f,
+ " hw: CH_CSR=0x%08x CH_ES=0x%08x\n",
+ imx_edma5_read32(vc->ch_regs, IMX_EDMA5_CH_CSR),
+ imx_edma5_read32(vc->ch_regs, IMX_EDMA5_CH_ES));
+ }
+
+ return 0;
+}
+
static const struct rte_dma_dev_ops imx_edma5_ops = {
.dev_info_get = imx_edma5_info_get,
.dev_configure = imx_edma5_configure,
@@ -937,6 +1057,12 @@ static const struct rte_dma_dev_ops imx_edma5_ops = {
.dev_close = imx_edma5_close,
.vchan_setup = imx_edma5_vchan_setup,
+ .vchan_status = imx_edma5_vchan_status,
+
+ .stats_get = imx_edma5_stats_get,
+ .stats_reset = imx_edma5_stats_reset,
+
+ .dev_dump = imx_edma5_dump,
};
static int
--
2.25.1
next prev parent reply other threads:[~2026-08-11 10:50 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-06 8:42 [PATCH 0/4] dma/imx_edma5: introduce NXP i.MX95 eDMA5 driver Gagandeep Singh
2026-08-06 8:42 ` [PATCH 1/4] dma/imx_edma5: introduce eDMA5 dmadev skeleton Gagandeep Singh
2026-08-06 8:42 ` [PATCH 2/4] dma/imx_edma5: add device configuration Gagandeep Singh
2026-08-06 8:42 ` [PATCH 3/4] dma/imx_edma5: add data path Gagandeep Singh
2026-08-06 8:42 ` [PATCH 4/4] dma/imx_edma5: add statistics and dump Gagandeep Singh
2026-08-06 16:21 ` Stephen Hemminger
2026-08-07 7:05 ` Gagandeep Singh
2026-08-06 17:11 ` [PATCH 0/4] dma/imx_edma5: introduce NXP i.MX95 eDMA5 driver Stephen Hemminger
2026-08-07 6:54 ` Gagandeep Singh
2026-08-07 6:48 ` [PATCH v2 0/5] " Gagandeep Singh
2026-08-07 6:48 ` [PATCH v2 1/5] bus/platform: match device by devicetree compatible string Gagandeep Singh
2026-08-07 6:48 ` [PATCH v2 2/5] dma/imx_edma5: introduce eDMA5 dmadev skeleton Gagandeep Singh
2026-08-07 6:48 ` [PATCH v2 3/5] dma/imx_edma5: add device configuration Gagandeep Singh
2026-08-07 6:48 ` [PATCH v2 4/5] dma/imx_edma5: add data path Gagandeep Singh
2026-08-07 6:48 ` [PATCH v2 5/5] dma/imx_edma5: add statistics and dump Gagandeep Singh
2026-08-10 15:37 ` [PATCH v2 0/5] dma/imx_edma5: introduce NXP i.MX95 eDMA5 driver Stephen Hemminger
2026-08-11 10:49 ` [PATCH v3 " Gagandeep Singh
2026-08-11 10:49 ` [PATCH v3 1/5] bus/platform: match device by devicetree compatible string Gagandeep Singh
2026-08-11 10:49 ` [PATCH v3 2/5] dma/imx_edma5: introduce eDMA5 dmadev skeleton Gagandeep Singh
2026-08-11 10:49 ` [PATCH v3 3/5] dma/imx_edma5: add device configuration Gagandeep Singh
2026-08-11 10:49 ` [PATCH v3 4/5] dma/imx_edma5: add data path Gagandeep Singh
2026-08-11 10:49 ` Gagandeep Singh [this message]
2026-08-11 17:00 ` [PATCH v3 0/5] dma/imx_edma5: introduce NXP i.MX95 eDMA5 driver Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260811104933.3843522-6-g.singh@nxp.com \
--to=g.singh@nxp.com \
--cc=dev@dpdk.org \
--cc=hemant.agrawal@nxp.com \
--cc=prashant.gupta_3@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox