From: Ivan Malov <ivan.malov@arknetworks.am>
To: dev@dpdk.org
Cc: Andy Moreton <andy.moreton@amd.com>,
Viacheslav Galaktionov <viacheslav.galaktionov@arknetworks.am>,
Roman Zhukov <Roman.Zhukov@arknetworks.am>,
Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>,
Stephen Hemminger <stephen@networkplumber.org>,
Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>,
stable@dpdk.org
Subject: [PATCH 3/3] common/sfc_efx/base: fix reading advertised autoneg ability
Date: Tue, 11 Aug 2026 21:49:13 +0400 [thread overview]
Message-ID: <20260811174913.8961-4-ivan.malov@arknetworks.am> (raw)
In-Reply-To: <20260811174913.8961-1-ivan.malov@arknetworks.am>
The issue is that when the user disables auto-negotiation by removing
the capability bit from the 'advertised mask' (set method) and then
reads the resulting capabilities, which involves querying MCDI, the
bit reappears in the mask irrespective of the user's intent.
Fix this by remembering the user's intent before any link-state queries.
Fixes: 2a5cf77e6de8 ("common/sfc_efx/base: provide PHY link get method on Medford4")
Fixes: 06f569de6c06 ("common/sfc_efx/base: decode netport link state on probe path")
Cc: stable@dpdk.org
Suggested-by: Andy Moreton <andy.moreton@amd.com>
Signed-off-by: Ivan Malov <ivan.malov@arknetworks.am>
Reviewed-by: Viacheslav Galaktionov <viacheslav.galaktionov@arknetworks.am>
Reviewed-by: Andy Moreton <andy.moreton@amd.com>
---
drivers/common/sfc_efx/base/efx_np.c | 11 +++++------
drivers/common/sfc_efx/base/medford4_phy.c | 6 +++++-
2 files changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/common/sfc_efx/base/efx_np.c b/drivers/common/sfc_efx/base/efx_np.c
index 4ba3c7d260..a8396535bf 100644
--- a/drivers/common/sfc_efx/base/efx_np.c
+++ b/drivers/common/sfc_efx/base/efx_np.c
@@ -436,9 +436,6 @@ efx_np_link_state(
MCDI_OUT2(req, const uint8_t, LINK_STATE_OUT_ADVERTISED_ABILITIES),
&lsp->enls_adv_cap_mask);
- if (lsp->enls_an_supported != B_FALSE)
- lsp->enls_adv_cap_mask |= 1U << EFX_PHY_CAP_AN;
-
efx_np_cap_hw_data_to_sw_mask(
MCDI_OUT2(req, const uint8_t,
LINK_STATE_OUT_LINK_PARTNER_ABILITIES),
@@ -1020,11 +1017,13 @@ efx_np_attach(
if (rc != 0)
goto fail3;
- if (ls.enls_an_supported != B_FALSE)
- epp->ep_phy_cap_mask |= 1U << EFX_PHY_CAP_AN;
-
epp->ep_adv_cap_mask = ls.enls_adv_cap_mask;
+ if (ls.enls_an_supported != B_FALSE) {
+ epp->ep_adv_cap_mask |= 1U << EFX_PHY_CAP_AN;
+ epp->ep_phy_cap_mask |= 1U << EFX_PHY_CAP_AN;
+ }
+
#if EFSYS_OPT_LOOPBACK
efx_np_assign_loopback_props(enp);
#endif /* EFSYS_OPT_LOOPBACK */
diff --git a/drivers/common/sfc_efx/base/medford4_phy.c b/drivers/common/sfc_efx/base/medford4_phy.c
index 7b456c9b8a..4d2a954d4f 100644
--- a/drivers/common/sfc_efx/base/medford4_phy.c
+++ b/drivers/common/sfc_efx/base/medford4_phy.c
@@ -32,15 +32,19 @@ medford4_phy_get_link(
__out ef10_link_state_t *elsp)
{
efx_np_handle_t nph = enp->en_port.ep_np_handle;
+ const efx_port_t *port = &enp->en_port;
efx_np_link_state_t ls;
efx_np_mac_state_t ms;
+ uint32_t preserve_an;
efx_rc_t rc;
+ preserve_an = port->ep_adv_cap_mask & (1U << EFX_PHY_CAP_AN);
+
rc = efx_np_link_state(enp, nph, &ls);
if (rc != 0)
goto fail1;
- elsp->epls.epls_adv_cap_mask = ls.enls_adv_cap_mask;
+ elsp->epls.epls_adv_cap_mask = ls.enls_adv_cap_mask | preserve_an;
elsp->epls.epls_lp_cap_mask = ls.enls_lp_cap_mask;
elsp->epls.epls_lane_count = ls.enls_lane_count;
elsp->els_loopback = ls.enls_loopback;
--
2.47.3
next prev parent reply other threads:[~2026-08-11 17:50 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-11 17:49 [PATCH 0/3] net/sfc: miscellaneous bug fixes Ivan Malov
2026-08-11 17:49 ` [PATCH 1/3] net/sfc: set Rx queue type flags from scratch on queue setup Ivan Malov
2026-08-11 17:49 ` [PATCH 2/3] net/sfc: drop wrong static qualifier from iterator variable Ivan Malov
2026-08-11 17:49 ` Ivan Malov [this message]
2026-08-11 20:24 ` [PATCH 0/3] net/sfc: miscellaneous bug fixes Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260811174913.8961-4-ivan.malov@arknetworks.am \
--to=ivan.malov@arknetworks.am \
--cc=Roman.Zhukov@arknetworks.am \
--cc=andrew.rybchenko@oktetlabs.ru \
--cc=andy.moreton@amd.com \
--cc=dev@dpdk.org \
--cc=pieter.jansen-van-vuuren@amd.com \
--cc=stable@dpdk.org \
--cc=stephen@networkplumber.org \
--cc=viacheslav.galaktionov@arknetworks.am \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox