[PATCH v13 14/25] dma/dpaa: add devargs for SG and errata workaround

[Hemant Agrawal <hemant.agrawal@nxp.com>]

From: Gagandeep Singh <g.singh@nxp.com>

Scatter-gather batching, the post-transfer data validation helper and the
ERR050757 read-transaction workaround already exist in the driver. This
patch does not add them; it makes them configurable at runtime and gates
the previously always-on data-validation and ERR050757 programming.

Add three new device arguments:

  dpaa_dma_sg_disable
    Submit each pending descriptor as an individual single-entry transfer
    instead of grouping them into one SG command. SG batching stays on by
    default.

  dpaa_dma_data_validation
    Enable the existing read-back-and-compare data validation helper, which
    is otherwise skipped. For debugging only; significant performance cost.

  dpaa_dma_pci_read_disable
    Skip the ERR050757 source-frame-descriptor programming (read
    transaction type and stride limiting). Only available when built with
    RTE_DMA_DPAA_ERRATA_ERR050757. May improve throughput on unaffected
    platforms.

Also let dma_pool_alloc() accept a NULL phy_addr and update the dmadev
documentation for the new arguments.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
---
 doc/guides/dmadevs/dpaa.rst  |  30 +++++++++-
 drivers/dma/dpaa/dpaa_qdma.c | 107 +++++++++++++++++++++++++++--------
 2 files changed, 110 insertions(+), 27 deletions(-)

diff --git a/doc/guides/dmadevs/dpaa.rst b/doc/guides/dmadevs/dpaa.rst
index 01104d7f1e..17aac5208c 100644
--- a/doc/guides/dmadevs/dpaa.rst
+++ b/doc/guides/dmadevs/dpaa.rst
@@ -76,5 +76,31 @@ Device Arguments
 ----------------
 
 ``dpaa_dma_err_check=1``
-  Check DMA errors at driver level.
-  Usage example: ``dpaa_bus:dpaa_qdma-1,dpaa_dma_err_check=1``
+  Enable DMA error checking at driver level. When set, the driver reads
+  the hardware error detect register after each dequeue and increments
+  the error statistics counter on any reported error.
+  Usage example: ``-a dpaa_bus:dpaa_qdma-1,dpaa_dma_err_check=1``
+
+``dpaa_dma_sg_disable=1``
+  Disable scatter-gather (SG) batching. By default the driver groups
+  multiple pending descriptors into a single SG command to reduce
+  doorbell overhead. Setting this devarg forces each descriptor to be
+  submitted as an individual single-entry transfer. Useful for latency
+  benchmarking or debugging.
+  Usage example: ``-a dpaa_bus:dpaa_qdma-1,dpaa_dma_sg_disable=1``
+
+``dpaa_dma_data_validation=1``
+  Enable post-DMA data validation. After each completed transfer the
+  driver reads back source and destination buffers and compares them
+  byte by byte, logging any mismatch. This has significant performance
+  impact and is intended for debugging only.
+  Usage example: ``-a dpaa_bus:dpaa_qdma-1,dpaa_dma_data_validation=1``
+
+``dpaa_dma_pci_read_disable=1``
+  Disable the ERR050757 workaround programming. The workaround sets the
+  read transaction type on the source frame descriptor and, for transfers
+  longer than the errata safe length, programs the source stride so that
+  read transactions stay within that limit. Only available when the driver
+  is built with ``RTE_DMA_DPAA_ERRATA_ERR050757`` enabled. Disabling it may
+  improve throughput on platforms not affected by the erratum.
+  Usage example: ``-a dpaa_bus:dpaa_qdma-1,dpaa_dma_pci_read_disable=1``
diff --git a/drivers/dma/dpaa/dpaa_qdma.c b/drivers/dma/dpaa/dpaa_qdma.c
index 3981bf277e..0dfb835d5b 100644
--- a/drivers/dma/dpaa/dpaa_qdma.c
+++ b/drivers/dma/dpaa/dpaa_qdma.c
@@ -11,8 +11,18 @@
 
 static uint32_t s_sg_max_entry_sz = 2000;
 static bool s_hw_err_check;
+static bool s_data_validation;
+static bool s_sg_enable = true;
+#ifdef RTE_DMA_DPAA_ERRATA_ERR050757
+static bool s_pci_read = true;
+#endif
 
-#define DPAA_DMA_ERROR_CHECK "dpaa_dma_err_check"
+#define DPAA_DMA_ERROR_CHECK		"dpaa_dma_err_check"
+#define DPAA_DMA_SG_DISABLE		"dpaa_dma_sg_disable"
+#define DPAA_DMA_DATA_VALID		"dpaa_dma_data_validation"
+#ifdef RTE_DMA_DPAA_ERRATA_ERR050757
+#define DPAA_DMA_PCI_READ_DISABLE	"dpaa_dma_pci_read_disable"
+#endif
 
 static inline void
 qdma_desc_addr_set64(struct fsl_qdma_comp_cmd_desc *ccdf, u64 addr)
@@ -112,7 +122,8 @@ dma_pool_alloc(char *nm, int size, int aligned, dma_addr_t *phy_addr)
 	if (!virt_addr)
 		return NULL;
 
-	*phy_addr = rte_mem_virt2iova(virt_addr);
+	if (phy_addr)
+		*phy_addr = rte_mem_virt2iova(virt_addr);
 
 	return virt_addr;
 }
@@ -392,6 +403,8 @@ fsl_qdma_data_validation(struct fsl_qdma_desc *desc[],
 	char err_msg[512];
 	int offset;
 
+	if (likely(!s_data_validation))
+		return;
 
 	offset = sprintf(err_msg, "Fatal TC%d/queue%d: ",
 		fsl_queue->block_id,
@@ -716,19 +729,21 @@ fsl_qdma_enqueue_desc_single(struct fsl_qdma_queue *fsl_queue,
 	ft = fsl_queue->ft[fsl_queue->ci];
 
 #ifdef RTE_DMA_DPAA_ERRATA_ERR050757
-	sdf = &ft->df.sdf;
-	sdf->srttype = FSL_QDMA_CMD_RWTTYPE;
+	if (s_pci_read) {
+		sdf = &ft->df.sdf;
+		sdf->srttype = FSL_QDMA_CMD_RWTTYPE;
 #ifdef RTE_DMA_DPAA_ERRATA_ERR050265
-	sdf->prefetch = 1;
+		sdf->prefetch = 1;
 #endif
-	if (len > FSL_QDMA_CMD_SS_ERR050757_LEN) {
-		sdf->ssen = 1;
-		sdf->sss = FSL_QDMA_CMD_SS_ERR050757_LEN;
-		sdf->ssd = FSL_QDMA_CMD_SS_ERR050757_LEN;
-	} else {
-		sdf->ssen = 0;
-		sdf->sss = 0;
-		sdf->ssd = 0;
+		if (len > FSL_QDMA_CMD_SS_ERR050757_LEN) {
+			sdf->ssen = 1;
+			sdf->sss = FSL_QDMA_CMD_SS_ERR050757_LEN;
+			sdf->ssd = FSL_QDMA_CMD_SS_ERR050757_LEN;
+		} else {
+			sdf->ssen = 0;
+			sdf->sss = 0;
+			sdf->ssd = 0;
+		}
 	}
 #endif
 	csgf_src = &ft->desc_sbuf;
@@ -837,19 +852,21 @@ fsl_qdma_enqueue_desc_sg(struct fsl_qdma_queue *fsl_queue)
 	csgf_src->length = total_len;
 	csgf_dest->length = total_len;
 #ifdef RTE_DMA_DPAA_ERRATA_ERR050757
-	sdf = &ft->df.sdf;
-	sdf->srttype = FSL_QDMA_CMD_RWTTYPE;
+	if (s_pci_read) {
+		sdf = &ft->df.sdf;
+		sdf->srttype = FSL_QDMA_CMD_RWTTYPE;
 #ifdef RTE_DMA_DPAA_ERRATA_ERR050265
-	sdf->prefetch = 1;
+		sdf->prefetch = 1;
 #endif
-	if (total_len > FSL_QDMA_CMD_SS_ERR050757_LEN) {
-		sdf->ssen = 1;
-		sdf->sss = FSL_QDMA_CMD_SS_ERR050757_LEN;
-		sdf->ssd = FSL_QDMA_CMD_SS_ERR050757_LEN;
-	} else {
-		sdf->ssen = 0;
-		sdf->sss = 0;
-		sdf->ssd = 0;
+		if (total_len > FSL_QDMA_CMD_SS_ERR050757_LEN) {
+			sdf->ssen = 1;
+			sdf->sss = FSL_QDMA_CMD_SS_ERR050757_LEN;
+			sdf->ssd = FSL_QDMA_CMD_SS_ERR050757_LEN;
+		} else {
+			sdf->ssen = 0;
+			sdf->sss = 0;
+			sdf->ssd = 0;
+		}
 	}
 #endif
 	ret = fsl_qdma_enqueue_desc_to_ring(fsl_queue, num);
@@ -888,6 +905,25 @@ fsl_qdma_enqueue_desc(struct fsl_qdma_queue *fsl_queue)
 			fsl_queue->pending_num = 0;
 		}
 		return ret;
+	} else if (!s_sg_enable) {
+		while (fsl_queue->pending_num > 0) {
+			ret = fsl_qdma_enqueue_desc_single(fsl_queue,
+				fsl_queue->pending_desc[start].dst,
+				fsl_queue->pending_desc[start].src,
+				fsl_queue->pending_desc[start].len);
+			if (!ret) {
+				start = (start + 1) &
+					(fsl_queue->pending_max - 1);
+				fsl_queue->pending_start = start;
+				fsl_queue->pending_num--;
+			} else {
+				DPAA_QDMA_ERR("Eq pending desc failed(%d)",
+					ret);
+				return -EIO;
+			}
+		}
+
+		return 0;
 	}
 
 	return fsl_qdma_enqueue_desc_sg(fsl_queue);
@@ -1358,6 +1394,20 @@ dpaa_qdma_init(struct rte_dma_dev *dmadev)
 		s_hw_err_check = true;
 		DPAA_QDMA_INFO("Enable DMA error checks");
 	}
+	if (dpaa_get_devargs(dmadev->device->devargs, DPAA_DMA_SG_DISABLE)) {
+		s_sg_enable = false;
+		DPAA_QDMA_INFO("SG mode disabled via devarg");
+	}
+	if (dpaa_get_devargs(dmadev->device->devargs, DPAA_DMA_DATA_VALID)) {
+		s_data_validation = true;
+		DPAA_QDMA_INFO("Data validation enabled via devarg");
+	}
+#ifdef RTE_DMA_DPAA_ERRATA_ERR050757
+	if (dpaa_get_devargs(dmadev->device->devargs, DPAA_DMA_PCI_READ_DISABLE)) {
+		s_pci_read = false;
+		DPAA_QDMA_INFO("ERR050757 PCI read workaround disabled via devarg");
+	}
+#endif
 
 	fsl_qdma->n_queues = QDMA_QUEUES * QDMA_BLOCKS;
 	fsl_qdma->num_blocks = QDMA_BLOCKS;
@@ -1483,5 +1533,12 @@ static struct rte_dpaa_driver rte_dpaa_qdma_pmd = {
 };
 
 RTE_PMD_REGISTER_DPAA(dpaa_qdma, rte_dpaa_qdma_pmd);
-RTE_PMD_REGISTER_PARAM_STRING(dpaa_qdma, DPAA_DMA_ERROR_CHECK "=<int>");
+RTE_PMD_REGISTER_PARAM_STRING(dpaa_qdma,
+	DPAA_DMA_ERROR_CHECK "=<int> "
+	DPAA_DMA_SG_DISABLE "=<int> "
+	DPAA_DMA_DATA_VALID "=<int> "
+#ifdef RTE_DMA_DPAA_ERRATA_ERR050757
+	DPAA_DMA_PCI_READ_DISABLE "=<int>"
+#endif
+	);
 RTE_LOG_REGISTER_DEFAULT(dpaa_qdma_logtype, INFO);
-- 
2.25.1