[PATCH 21/61] net/bnxt: replace use of rte_memcpy

DPDK-dev Archive on lore.kernel.org
 help / color / mirror / Atom feed

From: Stephen Hemminger <stephen@networkplumber.org>
To: dev@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>,
	Kishore Padmanabha <kishore.padmanabha@broadcom.com>,
	Ajit Khaparde <ajit.khaparde@broadcom.com>
Subject: [PATCH 21/61] net/bnxt: replace use of rte_memcpy
Date: Wed, 19 Aug 2026 22:12:11 -0700	[thread overview]
Message-ID: <20260820052251.1453273-22-stephen@networkplumber.org> (raw)
In-Reply-To: <20260820052251.1453273-1-stephen@networkplumber.org>

Don't need rte_memcpy for fixed size value.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 drivers/net/bnxt/bnxt_flow.c | 34 ++++++++++++++++++----------------
 1 file changed, 18 insertions(+), 16 deletions(-)

diff --git a/drivers/net/bnxt/bnxt_flow.c b/drivers/net/bnxt/bnxt_flow.c
index a2e590540b..901b019e66 100644
--- a/drivers/net/bnxt/bnxt_flow.c
+++ b/drivers/net/bnxt/bnxt_flow.c
@@ -233,8 +233,9 @@ bnxt_validate_and_parse_flow_type(const struct rte_flow_attr *attr,
 						    "DMAC is invalid!");
 					return -rte_errno;
 				}
-				rte_memcpy(filter->dst_macaddr,
-					   &eth_spec->hdr.dst_addr, RTE_ETHER_ADDR_LEN);
+				memcpy(filter->dst_macaddr,
+				       &eth_spec->hdr.dst_addr,
+				       RTE_ETHER_ADDR_LEN);
 				en |= use_ntuple ?
 					NTUPLE_FLTR_ALLOC_INPUT_EN_DST_MACADDR :
 					EM_FLOW_ALLOC_INPUT_EN_DST_MACADDR;
@@ -257,8 +258,9 @@ bnxt_validate_and_parse_flow_type(const struct rte_flow_attr *attr,
 						    "SMAC is invalid!");
 					return -rte_errno;
 				}
-				rte_memcpy(filter->src_macaddr,
-					   &eth_spec->hdr.src_addr, RTE_ETHER_ADDR_LEN);
+				memcpy(filter->src_macaddr,
+				       &eth_spec->hdr.src_addr,
+				       RTE_ETHER_ADDR_LEN);
 				en |= use_ntuple ?
 					NTUPLE_FLTR_ALLOC_INPUT_EN_SRC_MACADDR :
 					EM_FLOW_ALLOC_INPUT_EN_SRC_MACADDR;
@@ -423,23 +425,23 @@ bnxt_validate_and_parse_flow_type(const struct rte_flow_attr *attr,
 				en |= EM_FLOW_ALLOC_INPUT_EN_SRC_IPADDR |
 					EM_FLOW_ALLOC_INPUT_EN_DST_IPADDR;
 
-			rte_memcpy(filter->src_ipaddr,
-				   &ipv6_spec->hdr.src_addr, 16);
-			rte_memcpy(filter->dst_ipaddr,
-				   &ipv6_spec->hdr.dst_addr, 16);
+			memcpy(filter->src_ipaddr, &ipv6_spec->hdr.src_addr,
+			       16);
+			memcpy(filter->dst_ipaddr, &ipv6_spec->hdr.dst_addr,
+			       16);
 
 			if (!bnxt_check_zero_bytes(ipv6_mask->hdr.src_addr.a,
 						   16)) {
-				rte_memcpy(filter->src_ipaddr_mask,
-					   &ipv6_mask->hdr.src_addr, 16);
+				memcpy(filter->src_ipaddr_mask,
+				       &ipv6_mask->hdr.src_addr, 16);
 				en |= !use_ntuple ? 0 :
 				    NTUPLE_FLTR_ALLOC_INPUT_EN_SRC_IPADDR_MASK;
 			}
 
 			if (!bnxt_check_zero_bytes(ipv6_mask->hdr.dst_addr.a,
 						   16)) {
-				rte_memcpy(filter->dst_ipaddr_mask,
-					   &ipv6_mask->hdr.dst_addr, 16);
+				memcpy(filter->dst_ipaddr_mask,
+				       &ipv6_mask->hdr.dst_addr, 16);
 				en |= !use_ntuple ? 0 :
 				     NTUPLE_FLTR_ALLOC_INPUT_EN_DST_IPADDR_MASK;
 			}
@@ -591,8 +593,8 @@ bnxt_validate_and_parse_flow_type(const struct rte_flow_attr *attr,
 					return -rte_errno;
 				}
 
-				rte_memcpy(((uint8_t *)&tenant_id_be + 1),
-					   vxlan_spec->hdr.vni, 3);
+				memcpy(((uint8_t *)&tenant_id_be + 1),
+				       vxlan_spec->hdr.vni, 3);
 				filter->vni =
 					rte_be_to_cpu_32(tenant_id_be);
 				filter->tunnel_type =
@@ -645,8 +647,8 @@ bnxt_validate_and_parse_flow_type(const struct rte_flow_attr *attr,
 						 "Invalid TNI mask");
 					return -rte_errno;
 				}
-				rte_memcpy(((uint8_t *)&tenant_id_be + 1),
-					   nvgre_spec->tni, 3);
+				memcpy(((uint8_t *)&tenant_id_be + 1),
+				       nvgre_spec->tni, 3);
 				filter->vni =
 					rte_be_to_cpu_32(tenant_id_be);
 				filter->tunnel_type =
-- 
2.53.0

next prev parent reply	other threads:[~2026-08-20  5:25 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-20  5:11 [PATCH 00/61] reduce use of rte_memcpy Stephen Hemminger
2026-08-20  5:11 ` [PATCH 01/61] devtools/cocci: add script to replace fixed size rte_memcpy Stephen Hemminger
2026-08-20  5:11 ` [PATCH 02/61] app/testpmd: replace rte_memcpy with memcpy Stephen Hemminger
2026-08-20  5:11 ` [PATCH 03/61] test: use memcpy instead of rte_memcpy Stephen Hemminger
2026-08-20  6:22   ` Morten Brørup
2026-08-20  5:11 ` [PATCH 04/61] app/graph: replace rte_memcpy with memcpy Stephen Hemminger
2026-08-20  5:11 ` [PATCH 05/61] lpm: remove unnecessary include of rte_memcpy.h Stephen Hemminger
2026-08-20  5:11 ` [PATCH 06/61] acl: " Stephen Hemminger
2026-08-20  5:11 ` [PATCH 07/61] drivers/bus: " Stephen Hemminger
2026-08-20  5:11 ` [PATCH 08/61] security: replace fixed size rte_memcpy Stephen Hemminger
2026-08-20  5:11 ` [PATCH 09/61] ethdev: replace use of rte_memcpy Stephen Hemminger
2026-08-20  5:12 ` [PATCH 10/61] net: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 11/61] pdcp: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 12/61] eventdev: replace fixed size rte_memcpy Stephen Hemminger
2026-08-20  5:12 ` [PATCH 13/61] eal: replace rte_memcpy of cpuset Stephen Hemminger
2026-08-20  5:12 ` [PATCH 14/61] cryptodev: replace use of rte_memcpy Stephen Hemminger
2026-08-20  5:12 ` [PATCH 15/61] drivers/raw: use memcpy for fixed size data Stephen Hemminger
2026-08-20  5:12 ` [PATCH 16/61] test-pipeline: replace use of rte_memcpy Stephen Hemminger
2026-08-20  5:12 ` [PATCH 17/61] net/af_xdp: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 18/61] net/avp: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 19/61] net/axgbe: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 20/61] net/bnx2x: " Stephen Hemminger
2026-08-20  5:12 ` Stephen Hemminger [this message]
2026-08-20  5:12 ` [PATCH 22/61] net/bonding: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 23/61] net/cnxk: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 24/61] net/cxgbe: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 25/61] net/dpaa2: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 26/61] net/enic: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 27/61] net/failsafe: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 28/61] net/gve: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 29/61] net/hinic: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 30/61] net/hns3: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 31/61] net/mlx5: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 32/61] net/mvpp2: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 33/61] net/netvsc: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 34/61] net/nfp: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 35/61] net/ngbe: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 36/61] net/ntnic: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 37/61] net/null: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 38/61] net/qede: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 39/61] net/ring: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 40/61] net/sfc: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 41/61] net/txgbe: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 42/61] net/vhost: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 43/61] net/virtio: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 44/61] net/sxe2: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 45/61] net/zxdh: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 46/61] net/memif: use memcpy for fixed size data Stephen Hemminger
2026-08-20  5:12 ` [PATCH 47/61] net/ice: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 48/61] test-bbdev: remove unnecessary include rte_memcpy.h Stephen Hemminger
2026-08-20  5:12 ` [PATCH 49/61] drivers/mempool: use memcpy for fixed size data Stephen Hemminger
2026-08-20  5:12 ` [PATCH 50/61] ml/cnxk: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 51/61] drivers/event: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 52/61] baseband/la12xx: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 53/61] baseband/acc: replace use of rte_memcpy Stephen Hemminger
2026-08-20  5:12 ` [PATCH 54/61] drivers/*/qat: use memcpy for fixed size data Stephen Hemminger
2026-08-20  5:12 ` [PATCH 55/61] hash: replace use of rte_memcpy Stephen Hemminger
2026-08-20  5:12 ` [PATCH 56/61] rib: remove rte_memcpy include Stephen Hemminger
2026-08-20  5:12 ` [PATCH 57/61] pcapng: replace use of rte_memcpy Stephen Hemminger
2026-08-20  5:12 ` [PATCH 58/61] efd: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 59/61] net/xsc: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 60/61] net/pcap: " Stephen Hemminger
2026-08-20  5:12 ` [PATCH 61/61] power: " Stephen Hemminger
2026-08-20  7:31 ` [PATCH 00/61] reduce " Morten Brørup
2026-08-20  8:16   ` Bruce Richardson

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:a2e590540 dfblob:901b019e6 )
 OR (
bs:"[PATCH 21/61] net/bnxt: replace use of rte_memcpy" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260820052251.1453273-22-stephen@networkplumber.org \
    --to=stephen@networkplumber.org \
    --cc=ajit.khaparde@broadcom.com \
    --cc=dev@dpdk.org \
    --cc=kishore.padmanabha@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox