From: Zhang Tengfei <zhtfdev@gmail.com>
To: Jiawen Wu <jiawenwu@trustnetic.com>,
Zaiyu Wang <zaiyuwang@trustnetic.com>
Cc: dev@dpdk.org, stephen@networkplumber.org,
Zhang Tengfei <zhtfdev@gmail.com>,
stable@dpdk.org
Subject: [PATCH v2 3/3] net/txgbe: fix flow create error codes
Date: Wed, 16 Sep 2026 21:11:05 +0800 [thread overview]
Message-ID: <20260916131106.105667-4-zhtfdev@gmail.com> (raw)
In-Reply-To: <20260916131106.105667-1-zhtfdev@gmail.com>
txgbe_flow_create() reports failures with rte_flow_error_set(error, -ret).
The FDIR flex offset mismatch and mask-only paths jump to that handler
with ret == 0, so the application sees a failed create and errno 0. The
global mask memcmp path stores memcmp's positive result in ret, so -ret
is negative.
Set -EINVAL on these paths.
Fixes: 5c2352b9ece6 ("net/txgbe: support creating consistent filter")
Cc: stable@dpdk.org
Signed-off-by: Zhang Tengfei <zhtfdev@gmail.com>
---
drivers/net/txgbe/txgbe_flow.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/net/txgbe/txgbe_flow.c b/drivers/net/txgbe/txgbe_flow.c
index a1a497fa22..084b1eec1d 100644
--- a/drivers/net/txgbe/txgbe_flow.c
+++ b/drivers/net/txgbe/txgbe_flow.c
@@ -3388,12 +3388,12 @@ txgbe_flow_create(struct rte_eth_dev *dev,
* Only support one global mask,
* all the masks should be the same.
*/
- ret = memcmp(&fdir_info->mask,
+ if (memcmp(&fdir_info->mask,
&fdir_rule.mask,
- sizeof(struct txgbe_hw_fdir_mask));
- if (ret) {
+ sizeof(struct txgbe_hw_fdir_mask)) != 0) {
PMD_DRV_LOG(ERR, "only support one global mask");
rte_free(fdir_rule_ptr);
+ ret = -EINVAL;
goto out;
}
@@ -3402,6 +3402,7 @@ txgbe_flow_create(struct rte_eth_dev *dev,
fdir_info->flex_relative !=
fdir_rule.flex_relative) {
rte_free(fdir_rule_ptr);
+ ret = -EINVAL;
goto out;
}
}
@@ -3431,6 +3432,7 @@ txgbe_flow_create(struct rte_eth_dev *dev,
}
rte_free(fdir_rule_ptr);
+ ret = -EINVAL;
goto out;
}
--
2.53.0
next prev parent reply other threads:[~2026-09-16 13:12 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-15 15:24 [PATCH] net/txgbe: fix leak of filters on flow create Zhang Tengfei
2026-09-15 15:38 ` Stephen Hemminger
2026-09-15 15:48 ` Zhang Tengfei
2026-09-16 13:11 ` [PATCH v2 0/3] net/txgbe: fix flow create errors Zhang Tengfei
2026-09-16 13:11 ` [PATCH v2 1/3] net/txgbe: fix L2 tunnel error on flow create Zhang Tengfei
2026-09-16 13:11 ` [PATCH v2 2/3] net/txgbe: fix leak of filters " Zhang Tengfei
2026-09-16 13:11 ` Zhang Tengfei [this message]
2026-09-16 16:21 ` [PATCH v2 0/3] net/txgbe: fix flow create errors Stephen Hemminger
2026-09-17 15:32 ` [PATCH v3 " Zhang Tengfei
2026-09-17 15:32 ` [PATCH v3 1/3] net/txgbe: fix L2 tunnel error on flow create Zhang Tengfei
2026-09-17 15:32 ` [PATCH v3 2/3] net/txgbe: fix leak of filters " Zhang Tengfei
2026-09-17 15:32 ` [PATCH v3 3/3] net/txgbe: fix FDIR error handling " Zhang Tengfei
2026-09-18 16:06 ` [PATCH v3 0/3] net/txgbe: fix flow create errors Stephen Hemminger
2026-09-18 18:14 ` Zhang Tengfei
2026-09-18 18:30 ` [PATCH v4 " Zhang Tengfei
2026-09-18 18:30 ` [PATCH v4 1/3] net/txgbe: fix L2 tunnel error on flow create Zhang Tengfei
2026-09-18 18:30 ` [PATCH v4 2/3] net/txgbe: fix leak of filters " Zhang Tengfei
2026-09-18 18:30 ` [PATCH v4 3/3] net/txgbe: fix FDIR error handling " Zhang Tengfei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260916131106.105667-4-zhtfdev@gmail.com \
--to=zhtfdev@gmail.com \
--cc=dev@dpdk.org \
--cc=jiawenwu@trustnetic.com \
--cc=stable@dpdk.org \
--cc=stephen@networkplumber.org \
--cc=zaiyuwang@trustnetic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox