From: Shai Brandes <shaibran@amazon.com>
To: <stephen@networkplumber.org>
Cc: <dev@dpdk.org>, Shai Brandes <shaibran@amazon.com>
Subject: [PATCH 05/13] net/ena/base: add LLQ policy inline helper
Date: Tue, 13 Oct 2026 18:08:35 +0300 [thread overview]
Message-ID: <20261013150835.9482-1-shaibran@amazon.com> (raw)
Introduce a helper to abstract the LLQ placement policy check,
replacing direct mem_queue_type comparisons across ena-com.
Signed-off-by: Shai Brandes <shaibran@amazon.com>
---
drivers/net/ena/base/ena_com.h | 5 +++
drivers/net/ena/base/ena_eth_com.c | 55 +++++++++++++++---------------
drivers/net/ena/base/ena_eth_com.h | 6 ++--
3 files changed, 35 insertions(+), 31 deletions(-)
diff --git a/drivers/net/ena/base/ena_com.h b/drivers/net/ena/base/ena_com.h
index 2002dd2bda..c4b4ea0620 100644
--- a/drivers/net/ena/base/ena_com.h
+++ b/drivers/net/ena/base/ena_com.h
@@ -1120,6 +1120,11 @@ static inline struct ena_com_dev *ena_com_io_cq_to_ena_dev(struct ena_com_io_cq
return container_of(io_cq, struct ena_com_dev, io_cq_queues[io_cq->qid]);
}
+static inline bool ena_com_sq_is_llq(struct ena_com_io_sq *io_sq)
+{
+ return io_sq->mem_queue_type != ENA_ADMIN_PLACEMENT_POLICY_HOST;
+}
+
static inline bool ena_com_get_adaptive_moderation_enabled(struct ena_com_dev *ena_dev)
{
return ena_dev->adaptive_coalescing;
diff --git a/drivers/net/ena/base/ena_eth_com.c b/drivers/net/ena/base/ena_eth_com.c
index 8a019b3451..e3b2a753c4 100644
--- a/drivers/net/ena/base/ena_eth_com.c
+++ b/drivers/net/ena/base/ena_eth_com.c
@@ -151,16 +151,16 @@ static int ena_com_write_bounce_buffer_to_dev(struct ena_com_io_sq *io_sq,
return ENA_COM_OK;
}
-static int ena_com_write_header_to_bounce(struct ena_com_io_sq *io_sq,
- u8 *header_src,
- u16 header_len)
+static int ena_com_write_header_to_llq_entry(struct ena_com_io_sq *io_sq,
+ u8 *header_src,
+ u16 header_len)
{
struct ena_com_llq_pkt_ctrl *pkt_ctrl = &io_sq->llq_buf_ctrl;
struct ena_com_llq_info *llq_info = &io_sq->llq_info;
- u8 *bounce_buffer = pkt_ctrl->curr_bounce_buf;
+ u8 *curr_llq_entry = pkt_ctrl->curr_llq_entry;
u16 header_offset;
- if (unlikely(io_sq->mem_queue_type == ENA_ADMIN_PLACEMENT_POLICY_HOST))
+ if (unlikely(!ena_com_sq_is_llq(io_sq)))
return 0;
header_offset =
@@ -172,13 +172,13 @@ static int ena_com_write_header_to_bounce(struct ena_com_io_sq *io_sq,
return ENA_COM_FAULT;
}
- if (unlikely(!bounce_buffer)) {
+ if (unlikely(!curr_llq_entry)) {
ena_trc_err(ena_com_io_sq_to_ena_dev(io_sq),
- "Bounce buffer is NULL\n");
+ "LLQ entry is NULL\n");
return ENA_COM_FAULT;
}
- memcpy(bounce_buffer + header_offset, header_src, header_len);
+ memcpy(curr_llq_entry + header_offset, header_src, header_len);
return 0;
}
@@ -186,46 +186,46 @@ static int ena_com_write_header_to_bounce(struct ena_com_io_sq *io_sq,
static void *get_sq_desc_llq(struct ena_com_io_sq *io_sq)
{
struct ena_com_llq_pkt_ctrl *pkt_ctrl = &io_sq->llq_buf_ctrl;
- u8 *bounce_buffer;
+ u8 *curr_llq_entry;
void *sq_desc;
- bounce_buffer = pkt_ctrl->curr_bounce_buf;
+ curr_llq_entry = pkt_ctrl->curr_llq_entry;
- if (unlikely(!bounce_buffer)) {
+ if (unlikely(!curr_llq_entry)) {
ena_trc_err(ena_com_io_sq_to_ena_dev(io_sq),
- "Bounce buffer is NULL\n");
+ "LLQ entry is NULL\n");
return NULL;
}
- sq_desc = bounce_buffer + pkt_ctrl->idx * io_sq->desc_entry_size;
+ sq_desc = curr_llq_entry + pkt_ctrl->idx * io_sq->desc_entry_size;
pkt_ctrl->idx++;
pkt_ctrl->descs_left_in_line--;
return sq_desc;
}
-static int ena_com_close_bounce_buffer(struct ena_com_io_sq *io_sq)
+static int ena_com_close_llq_entry(struct ena_com_io_sq *io_sq)
{
struct ena_com_llq_pkt_ctrl *pkt_ctrl = &io_sq->llq_buf_ctrl;
struct ena_com_llq_info *llq_info = &io_sq->llq_info;
int rc;
- if (unlikely(io_sq->mem_queue_type == ENA_ADMIN_PLACEMENT_POLICY_HOST))
+ if (unlikely(!ena_com_sq_is_llq(io_sq)))
return ENA_COM_OK;
/* bounce buffer was used, so write it and get a new one */
if (likely(pkt_ctrl->idx)) {
rc = ena_com_write_bounce_buffer_to_dev(io_sq,
- pkt_ctrl->curr_bounce_buf);
+ pkt_ctrl->curr_llq_entry);
if (unlikely(rc)) {
ena_trc_err(ena_com_io_sq_to_ena_dev(io_sq),
"Failed to write bounce buffer to device\n");
return rc;
}
- pkt_ctrl->curr_bounce_buf =
+ pkt_ctrl->curr_llq_entry =
ena_com_get_next_bounce_buffer(&io_sq->bounce_buf_ctrl);
- memset(io_sq->llq_buf_ctrl.curr_bounce_buf,
+ memset(io_sq->llq_buf_ctrl.curr_llq_entry,
0x0, llq_info->desc_list_entry_size);
}
@@ -241,7 +241,7 @@ static void *get_tx_sq_desc(struct ena_com_io_sq *io_sq)
{
void *tx_desc;
- if (likely(io_sq->mem_queue_type == ENA_ADMIN_PLACEMENT_POLICY_DEV))
+ if (likely(ena_com_sq_is_llq(io_sq)))
return get_sq_desc_llq(io_sq);
tx_desc = get_sq_desc_regular_queue(io_sq);
@@ -259,16 +259,16 @@ static int ena_com_sq_update_llq_tail(struct ena_com_io_sq *io_sq)
if (!pkt_ctrl->descs_left_in_line) {
rc = ena_com_write_bounce_buffer_to_dev(io_sq,
- pkt_ctrl->curr_bounce_buf);
+ pkt_ctrl->curr_llq_entry);
if (unlikely(rc)) {
ena_trc_err(ena_com_io_sq_to_ena_dev(io_sq),
"Failed to write bounce buffer to device\n");
return rc;
}
- pkt_ctrl->curr_bounce_buf =
+ pkt_ctrl->curr_llq_entry =
ena_com_get_next_bounce_buffer(&io_sq->bounce_buf_ctrl);
- memset(io_sq->llq_buf_ctrl.curr_bounce_buf,
+ memset(io_sq->llq_buf_ctrl.curr_llq_entry,
0x0, llq_info->desc_list_entry_size);
pkt_ctrl->idx = 0;
@@ -291,7 +291,7 @@ static int ena_com_sq_update_reqular_queue_tail(struct ena_com_io_sq *io_sq)
static int ena_com_sq_update_tail(struct ena_com_io_sq *io_sq)
{
- if (likely(io_sq->mem_queue_type == ENA_ADMIN_PLACEMENT_POLICY_DEV))
+ if (likely(ena_com_sq_is_llq(io_sq)))
return ena_com_sq_update_llq_tail(io_sq);
return ena_com_sq_update_reqular_queue_tail(io_sq);
@@ -514,14 +514,13 @@ int ena_com_prepare_tx(struct ena_com_io_sq *io_sq,
return ENA_COM_INVAL;
}
- if (unlikely(io_sq->mem_queue_type == ENA_ADMIN_PLACEMENT_POLICY_DEV
- && !buffer_to_push)) {
+ if (unlikely(ena_com_sq_is_llq(io_sq) && !buffer_to_push)) {
ena_trc_err(ena_com_io_sq_to_ena_dev(io_sq),
"Push header wasn't provided in LLQ mode\n");
return ENA_COM_INVAL;
}
- rc = ena_com_write_header_to_bounce(io_sq, buffer_to_push, header_len);
+ rc = ena_com_write_header_to_llq_entry(io_sq, buffer_to_push, header_len);
if (unlikely(rc))
return rc;
@@ -534,7 +533,7 @@ int ena_com_prepare_tx(struct ena_com_io_sq *io_sq,
/* If the caller doesn't want to send packets */
if (unlikely(!num_bufs && !header_len)) {
- rc = ena_com_close_bounce_buffer(io_sq);
+ rc = ena_com_close_llq_entry(io_sq);
if (unlikely(rc))
ena_trc_err(ena_com_io_sq_to_ena_dev(io_sq),
"Failed to write buffers to LLQ\n");
@@ -635,7 +634,7 @@ int ena_com_prepare_tx(struct ena_com_io_sq *io_sq,
return rc;
}
- rc = ena_com_close_bounce_buffer(io_sq);
+ rc = ena_com_close_llq_entry(io_sq);
*nb_hw_desc = io_sq->tail - start_tail;
return rc;
diff --git a/drivers/net/ena/base/ena_eth_com.h b/drivers/net/ena/base/ena_eth_com.h
index f773699467..503cf45cf7 100644
--- a/drivers/net/ena/base/ena_eth_com.h
+++ b/drivers/net/ena/base/ena_eth_com.h
@@ -110,7 +110,7 @@ static inline bool ena_com_sq_have_enough_space(struct ena_com_io_sq *io_sq,
{
int temp;
- if (unlikely(io_sq->mem_queue_type == ENA_ADMIN_PLACEMENT_POLICY_HOST))
+ if (unlikely(!ena_com_sq_is_llq(io_sq)))
return ena_com_free_q_entries(io_sq) >= required_buffers;
/* This calculation doesn't need to be 100% accurate. So to reduce
@@ -136,8 +136,8 @@ static inline bool ena_com_meta_desc_changed(struct ena_com_io_sq *io_sq,
static inline bool is_llq_max_tx_burst_exists(struct ena_com_io_sq *io_sq)
{
- return (io_sq->mem_queue_type == ENA_ADMIN_PLACEMENT_POLICY_DEV) &&
- io_sq->llq_info.max_entries_in_tx_burst > 0;
+ return likely(ena_com_sq_is_llq(io_sq)) &&
+ (io_sq->llq_info.max_entries_in_tx_burst > 0);
}
static inline bool ena_com_is_doorbell_needed(struct ena_com_io_sq *io_sq,
--
2.17.1
reply other threads:[~2026-10-13 15:09 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261013150835.9482-1-shaibran@amazon.com \
--to=shaibran@amazon.com \
--cc=dev@dpdk.org \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox