DPDK-dev Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Gagandeep Singh <g.singh@nxp.com>
To: dev@dpdk.org
Cc: hemant.agrawal@nxp.com
Subject: [PATCH v5 3/4] net/dpaa: support non fmX-macY type of shared Ethernet name
Date: Tue, 17 Nov 2026 11:15:57 +0530	[thread overview]
Message-ID: <20261117054558.1297266-4-g.singh@nxp.com> (raw)
In-Reply-To: <20261117054558.1297266-1-g.singh@nxp.com>

From: Hemant Agrawal <hemant.agrawal@nxp.com>

A shared MAC interface needs the kernel netdev name to read the MTU,
and that name is only the DPDK port name for fmX-macY style netdevs.

Look it up in sysfs under the platform device of the dpa-ethernet node
the port was created from, and fall back to the port name.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
---
 doc/guides/nics/dpaa.rst       |  6 ++-
 drivers/net/dpaa/dpaa_ethdev.c | 68 +++++++++++++++++++++++++++++++++-
 2 files changed, 72 insertions(+), 2 deletions(-)

diff --git a/doc/guides/nics/dpaa.rst b/doc/guides/nics/dpaa.rst
index 7658e6d454..d391c0607f 100644
--- a/doc/guides/nics/dpaa.rst
+++ b/doc/guides/nics/dpaa.rst
@@ -276,6 +276,11 @@ Refer to the document :doc:`build_and_test` for details.
   and thus disabling hardware based packet handling at driver level,
   e.g. ``dpaa:fm1-mac3,recv_err_pkts=1``.
 
+* For a shared MAC interface the kernel network interface name is looked up
+  in sysfs from the device tree node the port was created from,
+  so a kernel interface that does not follow
+  the ``fmX-macY`` naming style is handled without extra configuration.
+
 ``drv_bh_port``
    Name of the back-half port associated with an offline (O/H) port device.
    It is passed on the offline port device itself, which is named
@@ -307,7 +312,6 @@ port identified by its ``port_id``, via the experimental
 ``rte_pmd_dpaa_ol_set_lgw_info()`` and ``rte_pmd_dpaa_ol_reset_lgw_info()``
 APIs declared in ``rte_pmd_dpaa_oldev.h``.
 
-
 FMAN Config
 -----------
 
diff --git a/drivers/net/dpaa/dpaa_ethdev.c b/drivers/net/dpaa/dpaa_ethdev.c
index fe49c7b961..a821e68807 100644
--- a/drivers/net/dpaa/dpaa_ethdev.c
+++ b/drivers/net/dpaa/dpaa_ethdev.c
@@ -9,12 +9,14 @@
 #include <inttypes.h>
 #include <unistd.h>
 #include <limits.h>
+#include <stdlib.h>
 #include <sched.h>
 #include <signal.h>
 #include <pthread.h>
 #include <sys/types.h>
 #include <sys/syscall.h>
 #include <sys/ioctl.h>
+#include <dirent.h>
 
 #include <eal_export.h>
 #include <rte_string_fns.h>
@@ -57,6 +59,61 @@
 #define DRIVER_RECV_ERR_PKTS      "recv_err_pkts"
 #define RTE_PRIORITY_103 103
 
+#define DPAA_OF_BASE_PATH "/sys/firmware/devicetree/base"
+
+/*
+ * Get the kernel netdev name bound to the same device tree node as this
+ * port, by matching each /sys/class/net/<ifname>/device/of_node against
+ * node_path. Returns 1 on success, 0 if none was found, negative on error.
+ */
+static int
+dpaa_get_kernel_ifname(const char *node_path, char *name, size_t size)
+{
+	char path[PATH_MAX], resolved[PATH_MAX];
+	struct dirent *entry;
+	DIR *dir;
+	int ret;
+
+	if (!node_path || node_path[0] == '\0')
+		return 0;
+
+	dir = opendir("/sys/class/net");
+	if (!dir)
+		return 0;
+
+	ret = 0;
+	while ((entry = readdir(dir)) != NULL) {
+		if (entry->d_name[0] == '.')
+			continue;
+
+		if (snprintf(path, sizeof(path),
+			     "/sys/class/net/%s/device/of_node",
+			     entry->d_name) >= (int)sizeof(path))
+			continue;
+
+		if (realpath(path, resolved) == NULL)
+			continue;
+
+		if (strncmp(resolved, DPAA_OF_BASE_PATH,
+			    strlen(DPAA_OF_BASE_PATH)) != 0)
+			continue;
+
+		if (strcmp(resolved + strlen(DPAA_OF_BASE_PATH),
+			   node_path) != 0)
+			continue;
+
+		if (rte_strscpy(name, entry->d_name, size) < 0) {
+			ret = -ENAMETOOLONG;
+			break;
+		}
+		ret = 1;
+		break;
+	}
+
+	closedir(dir);
+	return ret;
+}
+
 /* Supported Rx offloads */
 static uint64_t dev_rx_offloads_sup =
 		RTE_ETH_RX_OFFLOAD_SCATTER;
@@ -251,6 +308,7 @@ dpaa_eth_dev_configure(struct rte_eth_dev *dev)
 	int speed, duplex;
 	int ret, rx_status, socket_fd;
 	struct ifreq ifr;
+	char sh_if_name[IFNAMSIZ];
 
 	PMD_INIT_FUNC_TRACE();
 
@@ -272,7 +330,15 @@ dpaa_eth_dev_configure(struct rte_eth_dev *dev)
 			DPAA_PMD_ERR("Cannot open IF socket");
 			return -errno;
 		}
-		strlcpy(ifr.ifr_name, dpaa_intf->name, IFNAMSIZ);
+
+		/* The DPDK port name matches the netdev only for fmX-macY. */
+		sh_if_name[0] = '\0';
+		ret = dpaa_get_kernel_ifname(__fif->node_path, sh_if_name,
+					     sizeof(sh_if_name));
+		if (ret <= 0 || sh_if_name[0] == '\0')
+			strlcpy(ifr.ifr_name, dpaa_intf->name, IFNAMSIZ);
+		else
+			strlcpy(ifr.ifr_name, sh_if_name, IFNAMSIZ);
 
 		if (ioctl(socket_fd, SIOCGIFMTU, &ifr) < 0) {
 			DPAA_PMD_ERR("Cannot get interface mtu");
-- 
2.25.1


  parent reply	other threads:[~2026-11-17  5:46 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-28  8:55 [PATCH v1 0/3] DPAA driver changes Gagandeep Singh
2026-10-28  8:55 ` [PATCH v1 1/3] drivers: add offline (O/H) port device support Gagandeep Singh
2026-10-28  8:55 ` [PATCH v1 2/3] net/dpaa: support non fmX-macY type of shared Ethernet name Gagandeep Singh
2026-10-28  8:55 ` [PATCH v1 3/3] drivers: add DPAA cgrid cleanup support Gagandeep Singh
2026-10-28 14:41 ` [PATCH v1 0/3] DPAA driver changes Stephen Hemminger
2026-10-30  4:43   ` Gagandeep Singh
2026-10-30  4:43 ` [PATCH v2 0/4] " Gagandeep Singh
2026-10-30  4:43   ` [PATCH v2 1/4] bus/dpaa: fix out-of-bounds read of mac_idx array Gagandeep Singh
2026-10-30  4:43   ` [PATCH v2 2/4] drivers: add offline (O/H) port device support Gagandeep Singh
2026-10-30  4:43   ` [PATCH v2 3/4] net/dpaa: support non fmX-macY type of shared Ethernet name Gagandeep Singh
2026-10-30  4:43   ` [PATCH v2 4/4] drivers: add DPAA cgrid cleanup support Gagandeep Singh
2026-11-02  8:09   ` [PATCH v2 0/4] DPAA driver changes Stephen Hemminger
2026-11-02 13:23   ` Stephen Hemminger
2026-11-03  9:38     ` Gagandeep Singh
2026-11-03  9:35   ` [PATCH v3 " Gagandeep Singh
2026-11-03  9:35     ` [PATCH v3 1/4] bus/dpaa: fix out-of-bounds read of mac_idx array Gagandeep Singh
2026-11-03  9:35     ` [PATCH v3 2/4] drivers: add offline (O/H) port device support Gagandeep Singh
2026-11-03  9:36     ` [PATCH v3 3/4] net/dpaa: support non fmX-macY type of shared Ethernet name Gagandeep Singh
2026-11-03  9:36     ` [PATCH v3 4/4] drivers: add DPAA cgrid cleanup support Gagandeep Singh
2026-11-04 11:29     ` [PATCH v3 0/4] DPAA driver changes Stephen Hemminger
2026-11-05  5:53       ` Gagandeep Singh
2026-11-16  6:25     ` [PATCH v4 " Gagandeep Singh
2026-11-16  6:25       ` [PATCH v4 1/4] bus/dpaa: fix out-of-bounds read of mac_idx array Gagandeep Singh
2026-11-16  6:25       ` [PATCH v4 2/4] drivers: add offline (O/H) port device support Gagandeep Singh
2026-11-16  6:25       ` [PATCH v4 3/4] net/dpaa: support non fmX-macY type of shared Ethernet name Gagandeep Singh
2026-11-16  6:25       ` [PATCH v4 4/4] drivers: add DPAA cgrid cleanup support Gagandeep Singh
2026-11-16 22:48       ` [PATCH v4 0/4] DPAA driver changes Stephen Hemminger
2026-11-17  5:45       ` [PATCH v5 " Gagandeep Singh
2026-11-17  5:45         ` [PATCH v5 1/4] bus/dpaa: fix out-of-bounds read of mac_idx array Gagandeep Singh
2026-11-17  5:45         ` [PATCH v5 2/4] drivers: add offline (O/H) port device support Gagandeep Singh
2026-11-17  5:45         ` Gagandeep Singh [this message]
2026-11-17  5:45         ` [PATCH v5 4/4] drivers: add DPAA cgrid cleanup support Gagandeep Singh
2026-11-17 17:25         ` [PATCH v5 0/4] DPAA driver changes Stephen Hemminger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261117054558.1297266-4-g.singh@nxp.com \
    --to=g.singh@nxp.com \
    --cc=dev@dpdk.org \
    --cc=hemant.agrawal@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox