From: Stephen Hemminger <stephen@networkplumber.org>
To: Jiacheng Ye <yejiacheng4@h-partners.com>
Cc: dev@dpdk.org, Feifei Wang <wangfeifei40@huawei.com>,
Thomas Monjalon <thomas@monjalon.net>,
Anatoly Burakov <anatoly.burakov@intel.com>
Subject: Re: [PATCH v8 00/28] net/hinic3: add PMD features and fixes
Date: Fri, 20 Nov 2026 13:35:25 -0800 [thread overview]
Message-ID: <20261120133525.400a54bb@phoenix.local> (raw)
In-Reply-To: <20261120163454.1159-1-yejiacheng4@h-partners.com>
On Sat, 21 Nov 2026 00:34:25 +0800
Jiacheng Ye <yejiacheng4@h-partners.com> wrote:
> This series fixes offload capability advertisement, cmdq/compact CQE
> configuration, and a handful of driver defects, and adds NIC
> type identification, FEC, CIR drop statistics, VF LAG/link state, COS
> mask/map, mbox recording, RSS hash configuration, compact CQE Rx/Tx
> paths, TSO segment expansion, Tx burst mode reporting, queue statistics,
> pseudo-header checksum, per-tile cmdq ops, SP560 NIC support, and device
> kvargs tunables.
Applied to next-net for 27.03
The AI review noted:
Info
====
[PATCH 10/28] hinic3_check_rxq_intr_vec() also runs in the SP230
branch where the application did not ask for Rx interrupts. If there
are more queues than vectors, dev_start now fails for an application
that only polls. Consider falling back to the old behaviour in that
branch (leave dp_intr_en at 0 and log a warning) and keep the hard
failure only for intr_conf.rxq:
if (hinic3_check_rxq_intr_vec(dev, dev->data->nb_rx_queues))
return 0;
next prev parent reply other threads:[~2026-11-20 21:35 UTC|newest]
Thread overview: 232+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-10 14:44 [PATCH v1 00/17] net/hinic3: add PMD features and fixes Jiacheng Ye
2026-10-10 14:44 ` [PATCH v1 01/17] net/hinic3: fix offload and cmdq/compact CQE config Jiacheng Ye
2026-10-10 14:44 ` [PATCH v1 02/17] net/hinic3: add CIR drop statistics and VF LAG support Jiacheng Ye
2026-10-10 14:44 ` [PATCH v1 03/17] net/hinic3: add FEC mode get/set and capability support Jiacheng Ye
2026-10-10 14:44 ` [PATCH v1 04/17] net/hinic3: add mbox message recording and debug dump Jiacheng Ye
2026-10-10 14:44 ` [PATCH v1 05/17] net/hinic3: add COS mask and COS map support Jiacheng Ye
2026-10-10 14:44 ` [PATCH v1 06/17] net/hinic3: add VF link state and promiscuous support Jiacheng Ye
2026-10-10 14:44 ` [PATCH v1 07/17] net/hinic3: convert cmdq ops to static global variables Jiacheng Ye
2026-10-10 14:44 ` [PATCH v1 08/17] net/hinic3: update RSS hash type configuration Jiacheng Ye
2026-10-10 14:45 ` [PATCH v1 09/17] net/hinic3: refactor flow rule parsing Jiacheng Ye
2026-10-10 14:45 ` [PATCH v1 10/17] net/hinic3: add SP560 NIC type identification and handling Jiacheng Ye
2026-10-10 14:45 ` [PATCH v1 11/17] net/hinic3: add device kvargs parameters support Jiacheng Ye
2026-10-10 14:45 ` [PATCH v1 12/17] net/hinic3: add compact CQE Rx path and ptype table Jiacheng Ye
2026-10-10 14:45 ` [PATCH v1 13/17] net/hinic3: expand TSO from 127 to 255 segments Jiacheng Ye
2026-10-10 14:45 ` [PATCH v1 14/17] net/hinic3: split Tx burst function for compact CQE support Jiacheng Ye
2026-10-10 14:45 ` [PATCH v1 15/17] net/hinic3: add pseudo-header checksum calculation Jiacheng Ye
2026-10-10 14:45 ` [PATCH v1 16/17] net/hinic3: add per-tile prefetch/drop/CEQ cmdq ops Jiacheng Ye
2026-10-10 14:45 ` [PATCH v1 17/17] net/hinic3: add mbox count telemetry support Jiacheng Ye
2026-10-10 18:30 ` [PATCH v1 00/17] net/hinic3: add PMD features and fixes Stephen Hemminger
2026-10-14 14:39 ` jiachengye_123
2026-10-14 15:08 ` [PATCH v2 00/26] " Jiacheng Ye
2026-10-14 15:08 ` [PATCH v2 01/26] net/hinic3: fix SP230 VF PCI device ID Jiacheng Ye
2026-10-14 15:08 ` [PATCH v2 02/26] net/hinic3: fix double removal in ethertype flow destroy Jiacheng Ye
2026-10-14 15:08 ` [PATCH v2 03/26] net/hinic3: fix VXLAN VNI spec and mask write Jiacheng Ye
2026-10-14 15:09 ` [PATCH v2 04/26] net/hinic3: fix vport enable null dereference Jiacheng Ye
2026-10-14 15:09 ` [PATCH v2 05/26] net/hinic3: attach ethdev and set ops in secondary process Jiacheng Ye
2026-10-14 15:09 ` [PATCH v2 06/26] net/hinic3: add NIC type identification Jiacheng Ye
2026-10-14 15:09 ` [PATCH v2 07/26] net/hinic3: fix offload and cmdq/compact CQE config Jiacheng Ye
2026-10-14 15:09 ` [PATCH v2 08/26] net/hinic3: add CIR drop statistics and VF LAG support Jiacheng Ye
2026-10-14 15:09 ` [PATCH v2 09/26] net/hinic3: add FEC mode get/set and capability support Jiacheng Ye
2026-10-14 15:09 ` [PATCH v2 10/26] net/hinic3: add mbox message recording and debug dump Jiacheng Ye
2026-10-14 15:09 ` [PATCH v2 11/26] net/hinic3: add COS mask and COS map support Jiacheng Ye
2026-10-14 15:09 ` [PATCH v2 12/26] net/hinic3: add VF link state and promiscuous support Jiacheng Ye
2026-10-14 15:09 ` [PATCH v2 13/26] net/hinic3: convert cmdq ops to static global variables Jiacheng Ye
2026-10-14 15:09 ` [PATCH v2 14/26] net/hinic3: update RSS hash type configuration Jiacheng Ye
2026-10-14 15:09 ` [PATCH v2 15/26] net/hinic3: refactor flow rule parsing Jiacheng Ye
2026-10-14 15:09 ` [PATCH v2 16/26] net/hinic3: add SP560 NIC type identification and handling Jiacheng Ye
2026-10-14 15:09 ` [PATCH v2 17/26] net/hinic3: add device kvargs parameters support Jiacheng Ye
2026-10-14 15:09 ` [PATCH v2 18/26] net/hinic3: add compact CQE Rx path and ptype table Jiacheng Ye
2026-10-14 15:09 ` [PATCH v2 19/26] net/hinic3: expand TSO from 127 to 255 segments Jiacheng Ye
2026-10-14 15:09 ` [PATCH v2 20/26] net/hinic3: split Tx burst function for compact CQE support Jiacheng Ye
2026-10-14 15:09 ` [PATCH v2 21/26] net/hinic3: ensure queue depth and state consistency Jiacheng Ye
2026-10-14 15:09 ` [PATCH v2 22/26] net/hinic3: add SP230 VF software statistics Jiacheng Ye
2026-10-14 15:09 ` [PATCH v2 23/26] net/hinic3: add Tx burst mode get Jiacheng Ye
2026-10-14 15:09 ` [PATCH v2 24/26] net/hinic3: expose Tx queue copied-mbuf statistics Jiacheng Ye
2026-10-14 15:09 ` [PATCH v2 25/26] net/hinic3: add pseudo-header checksum calculation Jiacheng Ye
2026-10-14 15:09 ` [PATCH v2 26/26] net/hinic3: add per-tile prefetch/drop/CEQ cmdq ops Jiacheng Ye
2026-10-14 17:13 ` [PATCH v2 00/26] net/hinic3: add PMD features and fixes Stephen Hemminger
2026-10-19 15:19 ` [PATCH v3 00/27] " Jiacheng Ye
2026-10-19 15:19 ` [PATCH 01/27] net/hinic3: fix SP230 VF PCI device ID Jiacheng Ye
2026-10-19 15:19 ` [PATCH 02/27] net/hinic3: fix double removal in ethertype flow destroy Jiacheng Ye
2026-10-19 15:19 ` [PATCH 03/27] net/hinic3: fix TCAM index leak on ethertype flow set Jiacheng Ye
2026-10-19 15:19 ` [PATCH 04/27] net/hinic3: fix VXLAN VNI spec and mask write Jiacheng Ye
2026-10-19 15:19 ` [PATCH 05/27] net/hinic3: fix vport enable null dereference Jiacheng Ye
2026-10-19 15:19 ` [PATCH 06/27] net/hinic3: attach ethdev and set ops in secondary process Jiacheng Ye
2026-10-19 15:19 ` [PATCH 07/27] net/hinic3: add NIC type identification Jiacheng Ye
2026-10-19 15:19 ` [PATCH 08/27] net/hinic3: add SP230 Rx queue interrupt handling Jiacheng Ye
2026-10-19 15:19 ` [PATCH 09/27] net/hinic3: fix offload and cmdq/compact CQE config Jiacheng Ye
2026-10-19 15:19 ` [PATCH 10/27] net/hinic3: add CIR drop statistics and VF LAG support Jiacheng Ye
2026-10-19 15:19 ` [PATCH 11/27] net/hinic3: add FEC mode get/set and capability support Jiacheng Ye
2026-10-19 15:19 ` [PATCH 12/27] net/hinic3: add mbox message recording and debug dump Jiacheng Ye
2026-10-19 15:19 ` [PATCH 13/27] net/hinic3: add COS mask and COS map support Jiacheng Ye
2026-10-19 15:19 ` [PATCH 14/27] net/hinic3: add VF link state and promiscuous support Jiacheng Ye
2026-10-19 15:19 ` [PATCH 15/27] net/hinic3: convert cmdq ops to static global variables Jiacheng Ye
2026-10-19 15:19 ` [PATCH 16/27] net/hinic3: update RSS hash type configuration Jiacheng Ye
2026-10-19 15:19 ` [PATCH 17/27] net/hinic3: refactor flow rule parsing Jiacheng Ye
2026-10-19 15:19 ` [PATCH 18/27] net/hinic3: add SP560 NIC type identification and handling Jiacheng Ye
2026-10-19 15:19 ` [PATCH 19/27] net/hinic3: add device kvargs parameters support Jiacheng Ye
2026-10-19 15:19 ` [PATCH 20/27] net/hinic3: add compact CQE Rx path and ptype table Jiacheng Ye
2026-10-19 15:19 ` [PATCH 21/27] net/hinic3: expand TSO from 127 to 255 segments Jiacheng Ye
2026-10-19 15:19 ` [PATCH 22/27] net/hinic3: split Tx burst function for compact CQE support Jiacheng Ye
2026-10-19 15:19 ` [PATCH 23/27] net/hinic3: ensure queue depth and state consistency Jiacheng Ye
2026-10-19 15:19 ` [PATCH 24/27] net/hinic3: add SP230 VF software statistics Jiacheng Ye
2026-10-19 15:19 ` [PATCH 25/27] net/hinic3: add Tx burst mode get Jiacheng Ye
2026-10-19 15:19 ` [PATCH 26/27] net/hinic3: expose Tx queue copied-mbuf statistics Jiacheng Ye
2026-10-19 15:19 ` [PATCH 27/27] net/hinic3: add pseudo-header checksum calculation Jiacheng Ye
2026-10-19 16:52 ` [PATCH v3 00/27] net/hinic3: add PMD features and fixes Stephen Hemminger
2026-10-23 15:56 ` jiachengye_123
2026-10-23 15:57 ` [PATCH v4 " Jiacheng Ye
2026-10-23 15:57 ` [PATCH v4 01/27] net/hinic3: fix SP230 VF PCI device ID Jiacheng Ye
2026-10-23 15:57 ` [PATCH v4 02/27] net/hinic3: fix double removal in ethertype flow destroy Jiacheng Ye
2026-10-23 15:57 ` [PATCH v4 03/27] net/hinic3: fix TCAM index leak on ethertype flow set Jiacheng Ye
2026-10-23 15:57 ` [PATCH v4 04/27] net/hinic3: fix VXLAN VNI spec and mask write Jiacheng Ye
2026-10-23 15:57 ` [PATCH v4 05/27] net/hinic3: fix vport enable null dereference Jiacheng Ye
2026-10-23 15:57 ` [PATCH v4 06/27] net/hinic3: attach ethdev and set ops in secondary process Jiacheng Ye
2026-10-23 15:57 ` [PATCH v4 07/27] net/hinic3: add NIC type identification Jiacheng Ye
2026-10-23 15:57 ` [PATCH v4 08/27] net/hinic3: fix pseudo-header checksum calculation Jiacheng Ye
2026-10-23 15:57 ` [PATCH v4 09/27] net/hinic3: add SP230 Rx queue interrupt handling Jiacheng Ye
2026-10-23 15:57 ` [PATCH v4 10/27] net/hinic3: fix offload and cmdq/compact CQE config Jiacheng Ye
2026-10-23 15:57 ` [PATCH v4 11/27] net/hinic3: add CIR drop statistics and VF LAG support Jiacheng Ye
2026-10-23 15:57 ` [PATCH v4 12/27] net/hinic3: add FEC mode get/set and capability support Jiacheng Ye
2026-10-23 15:57 ` [PATCH v4 13/27] net/hinic3: add mbox message recording and debug dump Jiacheng Ye
2026-10-23 15:57 ` [PATCH v4 14/27] net/hinic3: add COS mask and COS map support Jiacheng Ye
2026-10-23 15:57 ` [PATCH v4 15/27] net/hinic3: add VF link state and promiscuous support Jiacheng Ye
2026-10-23 15:57 ` [PATCH v4 16/27] net/hinic3: convert cmdq ops to static global variables Jiacheng Ye
2026-10-23 15:57 ` [PATCH v4 17/27] net/hinic3: update RSS hash type configuration Jiacheng Ye
2026-10-23 15:57 ` [PATCH v4 18/27] net/hinic3: refactor flow rule parsing Jiacheng Ye
2026-10-23 15:58 ` [PATCH v4 19/27] net/hinic3: add SP560 NIC type identification and handling Jiacheng Ye
2026-10-23 15:58 ` [PATCH v4 20/27] net/hinic3: add device kvargs parameters support Jiacheng Ye
2026-10-23 15:58 ` [PATCH v4 21/27] net/hinic3: add compact CQE Rx path and ptype table Jiacheng Ye
2026-10-23 15:58 ` [PATCH v4 22/27] net/hinic3: ensure queue depth and state consistency Jiacheng Ye
2026-10-23 15:58 ` [PATCH v4 23/27] net/hinic3: expand TSO from 127 to 255 segments Jiacheng Ye
2026-10-23 15:58 ` [PATCH v4 24/27] net/hinic3: split Tx burst function for compact CQE support Jiacheng Ye
2026-10-23 15:58 ` [PATCH v4 25/27] net/hinic3: add SP230 VF software statistics Jiacheng Ye
2026-10-23 15:58 ` [PATCH v4 26/27] net/hinic3: add Tx burst mode get Jiacheng Ye
2026-10-23 15:58 ` [PATCH v4 27/27] net/hinic3: expose Tx queue copied-mbuf statistics Jiacheng Ye
2026-10-23 16:21 ` [PATCH v4 00/27] net/hinic3: add PMD features and fixes Stephen Hemminger
2026-10-30 14:47 ` [PATCH v5 00/28] " Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 01/28] net/hinic3: fix SP230 VF PCI device ID Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 02/28] net/hinic3: fix double removal in ethertype flow destroy Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 03/28] net/hinic3: fix TCAM index leak on ethertype flow set Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 04/28] net/hinic3: fix VXLAN VNI spec and mask write Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 05/28] net/hinic3: fix vport enable null dereference Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 06/28] net/hinic3: clear stale Rx hardware CI on queue reset Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 07/28] net/hinic3: attach ethdev and set ops in secondary process Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 08/28] net/hinic3: add NIC type identification Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 09/28] net/hinic3: fix pseudo-header checksum calculation Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 10/28] net/hinic3: add SP230 Rx queue interrupt handling Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 11/28] net/hinic3: fix offload and cmdq/compact CQE config Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 12/28] net/hinic3: add CIR drop statistics and VF LAG support Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 13/28] net/hinic3: add FEC mode get/set and capability support Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 14/28] net/hinic3: add mbox message recording and debug dump Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 15/28] net/hinic3: add COS mask and COS map support Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 16/28] net/hinic3: add VF link state and promiscuous support Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 17/28] net/hinic3: convert cmdq ops to static global variables Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 18/28] net/hinic3: update RSS hash type configuration Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 19/28] net/hinic3: refactor flow rule parsing Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 20/28] net/hinic3: add SP560 NIC type identification and handling Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 21/28] net/hinic3: add device kvargs parameters support Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 22/28] net/hinic3: add compact CQE Rx path and ptype table Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 23/28] net/hinic3: ensure queue depth and state consistency Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 24/28] net/hinic3: expand TSO from 127 to 255 segments Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 25/28] net/hinic3: split Tx burst function for compact CQE support Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 26/28] net/hinic3: add SP230 VF software statistics Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 27/28] net/hinic3: add Tx burst mode get Jiacheng Ye
2026-10-30 14:47 ` [PATCH v5 28/28] net/hinic3: expose Tx queue copied-mbuf statistics Jiacheng Ye
2026-11-02 7:48 ` [PATCH v5 00/28] net/hinic3: add PMD features and fixes Stephen Hemminger
2026-11-09 16:02 ` jiachengye_123
2026-11-09 16:20 ` [PATCH v6 " Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 01/28] net/hinic3: fix SP230 VF PCI device ID Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 02/28] net/hinic3: fix double removal in ethertype flow destroy Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 03/28] net/hinic3: fix TCAM index leak on ethertype flow set Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 04/28] net/hinic3: fix VXLAN VNI spec and mask write Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 05/28] net/hinic3: fix vport enable null dereference Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 06/28] net/hinic3: clear stale Rx hardware CI on queue reset Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 07/28] net/hinic3: attach ethdev and set ops in secondary process Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 08/28] net/hinic3: add NIC type identification Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 09/28] net/hinic3: fix pseudo-header checksum calculation Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 10/28] net/hinic3: add SP230 Rx queue interrupt handling Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 11/28] net/hinic3: fix offload and cmdq/compact CQE config Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 12/28] net/hinic3: add CIR drop statistics and VF LAG support Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 13/28] net/hinic3: add FEC mode get/set and capability support Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 14/28] net/hinic3: add mbox message recording and debug dump Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 15/28] net/hinic3: add COS mask and COS map support Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 16/28] net/hinic3: add VF link state and promiscuous support Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 17/28] net/hinic3: convert cmdq ops to static global variables Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 18/28] net/hinic3: update RSS hash type configuration Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 19/28] net/hinic3: refactor flow rule parsing Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 20/28] net/hinic3: add SP560 NIC type identification and handling Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 21/28] net/hinic3: add device kvargs parameters support Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 22/28] net/hinic3: add compact CQE Rx path and ptype table Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 23/28] net/hinic3: ensure queue depth and state consistency Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 24/28] net/hinic3: expand TSO from 127 to 255 segments Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 25/28] net/hinic3: split Tx burst function for compact CQE support Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 26/28] net/hinic3: add SP230 VF software statistics Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 27/28] net/hinic3: add Tx burst mode get Jiacheng Ye
2026-11-09 16:20 ` [PATCH v6 28/28] net/hinic3: expose Tx queue copied-mbuf statistics Jiacheng Ye
2026-11-09 17:30 ` [PATCH v6 00/28] net/hinic3: add PMD features and fixes Stephen Hemminger
2026-11-17 15:52 ` jiachengye_123
2026-11-17 15:56 ` [PATCH v7 00/29] " Jiacheng Ye
2026-11-17 15:56 ` [PATCH v7 01/29] net/hinic3: fix SP230 VF PCI device ID Jiacheng Ye
2026-11-17 15:56 ` [PATCH v7 02/29] net/hinic3: fix double removal in ethertype flow destroy Jiacheng Ye
2026-11-17 15:56 ` [PATCH v7 03/29] net/hinic3: fix TCAM index leak on ethertype flow set Jiacheng Ye
2026-11-17 15:56 ` [PATCH v7 04/29] net/hinic3: fix VXLAN VNI spec and mask write Jiacheng Ye
2026-11-17 15:56 ` [PATCH v7 05/29] net/hinic3: fix vport enable null dereference Jiacheng Ye
2026-11-17 15:56 ` [PATCH v7 06/29] net/hinic3: clear stale Rx hardware CI on queue reset Jiacheng Ye
2026-11-17 15:56 ` [PATCH v7 07/29] net/hinic3: attach ethdev and set ops in secondary process Jiacheng Ye
2026-11-17 15:56 ` [PATCH v7 08/29] net/hinic3: fix per-queue start/stop on non-HTN devices Jiacheng Ye
2026-11-17 15:56 ` [PATCH v7 09/29] net/hinic3: add NIC type identification Jiacheng Ye
2026-11-17 15:56 ` [PATCH v7 10/29] net/hinic3: fix pseudo-header checksum calculation Jiacheng Ye
2026-11-17 15:56 ` [PATCH v7 11/29] net/hinic3: add SP230 Rx queue interrupt handling Jiacheng Ye
2026-11-17 15:56 ` [PATCH v7 12/29] net/hinic3: fix offload and cmdq/compact CQE config Jiacheng Ye
2026-11-17 15:56 ` [PATCH v7 13/29] net/hinic3: add CIR drop statistics and VF LAG support Jiacheng Ye
2026-11-17 15:56 ` [PATCH v7 14/29] net/hinic3: add FEC mode get/set and capability support Jiacheng Ye
2026-11-17 15:56 ` [PATCH v7 15/29] net/hinic3: add mbox message recording and debug dump Jiacheng Ye
2026-11-17 15:56 ` [PATCH v7 16/29] net/hinic3: add COS mask and COS map support Jiacheng Ye
2026-11-17 15:56 ` [PATCH v7 17/29] net/hinic3: add VF link state and promiscuous support Jiacheng Ye
2026-11-17 15:56 ` [PATCH v7 18/29] net/hinic3: convert cmdq ops to static global variables Jiacheng Ye
2026-11-17 15:57 ` [PATCH v7 19/29] net/hinic3: update RSS hash type configuration Jiacheng Ye
2026-11-17 15:57 ` [PATCH v7 20/29] net/hinic3: refactor flow rule parsing Jiacheng Ye
2026-11-17 15:57 ` [PATCH v7 21/29] net/hinic3: add SP560 NIC type identification and handling Jiacheng Ye
2026-11-17 15:57 ` [PATCH v7 22/29] net/hinic3: add device kvargs parameters support Jiacheng Ye
2026-11-17 15:57 ` [PATCH v7 23/29] net/hinic3: add compact CQE Rx path and ptype table Jiacheng Ye
2026-11-17 15:57 ` [PATCH v7 24/29] net/hinic3: ensure queue depth and state consistency Jiacheng Ye
2026-11-17 15:57 ` [PATCH v7 25/29] net/hinic3: expand TSO from 127 to 255 segments Jiacheng Ye
2026-11-17 15:57 ` [PATCH v7 26/29] net/hinic3: split Tx burst function for compact CQE support Jiacheng Ye
2026-11-17 15:57 ` [PATCH v7 27/29] net/hinic3: add SP230 VF software statistics Jiacheng Ye
2026-11-17 15:57 ` [PATCH v7 28/29] net/hinic3: add Tx burst mode get Jiacheng Ye
2026-11-17 15:57 ` [PATCH v7 29/29] net/hinic3: expose Tx queue copied-mbuf statistics Jiacheng Ye
2026-11-18 23:54 ` [PATCH v7 00/29] net/hinic3: add PMD features and fixes Stephen Hemminger
2026-11-20 16:33 ` jiachengye_123
2026-11-20 16:34 ` [PATCH v8 00/28] " Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 01/28] net/hinic3: fix SP230 VF PCI device ID Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 02/28] net/hinic3: fix double removal in ethertype flow destroy Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 03/28] net/hinic3: fix TCAM index leak on ethertype flow set Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 04/28] net/hinic3: fix VXLAN VNI spec and mask write Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 05/28] net/hinic3: fix vport enable null dereference Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 06/28] net/hinic3: clear stale Rx hardware CI on queue reset Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 07/28] net/hinic3: attach ethdev and set ops in secondary process Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 08/28] net/hinic3: fix per-queue start/stop on non-HTN devices Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 09/28] net/hinic3: fix pseudo-header checksum and identify NIC type Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 10/28] net/hinic3: add SP230 Rx queue interrupt handling Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 11/28] net/hinic3: fix offload and cmdq/compact CQE config Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 12/28] net/hinic3: add vport statistics and VF LAG support Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 13/28] net/hinic3: add FEC mode get/set and capability support Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 14/28] net/hinic3: add mbox message recording and debug dump Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 15/28] net/hinic3: add COS mask and COS map support Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 16/28] net/hinic3: add VF link state and promiscuous support Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 17/28] net/hinic3: convert cmdq ops to static global variables Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 18/28] net/hinic3: update RSS hash type configuration Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 19/28] net/hinic3: refactor flow rule parsing Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 20/28] net/hinic3: add SP560 NIC type identification and handling Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 21/28] net/hinic3: add device kvargs parameters support Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 22/28] net/hinic3: add compact CQE Rx path and ptype table Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 23/28] net/hinic3: ensure queue depth and state consistency Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 24/28] net/hinic3: expand TSO from 127 to 255 segments Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 25/28] net/hinic3: split Tx burst function for compact task support Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 26/28] net/hinic3: add SP230 VF software statistics Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 27/28] net/hinic3: add Tx burst mode get Jiacheng Ye
2026-11-20 16:34 ` [PATCH v8 28/28] net/hinic3: expose Tx queue copied-mbuf statistics Jiacheng Ye
2026-11-20 21:35 ` Stephen Hemminger [this message]
2026-11-17 16:28 ` [PATCH v6 00/28] net/hinic3: add PMD features and fixes Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261120133525.400a54bb@phoenix.local \
--to=stephen@networkplumber.org \
--cc=anatoly.burakov@intel.com \
--cc=dev@dpdk.org \
--cc=thomas@monjalon.net \
--cc=wangfeifei40@huawei.com \
--cc=yejiacheng4@h-partners.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox