* DPDK xen-dom0 not working at all
@ 2014-10-30 10:26 Murillo
[not found] ` <54521263.5020600-+ngl/9zrRLQ@public.gmane.org>
0 siblings, 1 reply; 5+ messages in thread
From: Murillo @ 2014-10-30 10:26 UTC (permalink / raw)
To: dev-VfR2kkLFssw
English is not my native language; please excuse typing errors.
I am new to DPDK with Xen, but I am able to run DPDK applications
without xen using hugepages. But when I try to do it in xen-dom0 it does
not work. Let me explain:
I have followed the intructions on the Getting Started Guide, so I
execute the next steps:
Dpdk/config/common_linuxapp
CONFIG_RTE_LIBRTE_XEN_DOM0=y
make config T=x86_64-native-linuxapp-gcc
make install T=x86_64-native-linuxapp-gcc
sudo modprobe uio
sudo insmod x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
sudo insmod x86_64-native-linuxapp-gcc/kmod/rte_dom0_mm.ko rsv_memsize=2048
echo 2048 /sys/kernel/mm/dom0-mm/memsize-mB/memsize
tools/dpdk_nic_bind.py --bind=igb_uio $(tools/dpdk_nic_bind.py --status
| sed -rn 's,.* if=([^ ]*).*igb_uio *$,\1,p')
The main problem appears when I try to execute helloworld for example.
Sudo ./build/helloworld -c 0xf -n 2 –xen-dom0
Output:
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 0
EAL: Detected lcore 2 as core 1 on socket 0
…
EAL: Detected lcore 39 as core 12 on socket 0
EAL: Support maximum 64 logical core(s) by configuration.
EAL: Detected 40 lcore(s)
And it stops.
If I execute dmegs I get the following:
[ 1098.120193] helloworld[20116] trap invalid opcode ip:45adb7
sp:7fff4cf7e150 error:0 in helloworld[400000+115000]
Here are the characteristics of the server:
DPDK 1.7.1
xm info:
host : vh05
release : 3.5.0-47-generic
version : #71~precise1-Ubuntu SMP Wed Feb 19 22:02:52 UTC 2014
machine : x86_64
nr_cpus : 40
nr_nodes : 2
cores_per_socket : 10
threads_per_core : 2
cpu_mhz : 3000
hw_caps :
bfebfbff:2c100800:00000000:00007f40:73bee3ff:00000000:00000001:00000281
virt_caps : hvm hvm_directio
total_memory : 32722
free_memory : 28196
free_cpus : 0
xen_major : 4
xen_minor : 1
xen_extra : .5
xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p
hvm-3.0-x86_64
xen_scheduler : credit
xen_pagesize : 4096
platform_params : virt_start=0xffff800000000000
xen_changeset : unavailable
xen_commandline : placeholder dom0_mem=4096M max_loop=64
cc_compiler : gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5)
cc_compile_by : stefan.bader
cc_compile_domain : canonical.com
cc_compile_date : Wed Feb 19 15:32:59 UTC 2014
xend_config_format : 4
Thank you in anvanced.
^ permalink raw reply [flat|nested] 5+ messages in thread[parent not found: <54521263.5020600-+ngl/9zrRLQ@public.gmane.org>]
* Re: DPDK xen-dom0 not working at all [not found] ` <54521263.5020600-+ngl/9zrRLQ@public.gmane.org> @ 2014-10-30 12:59 ` Liu, Jijiang [not found] ` <1ED644BD7E0A5F4091CF203DAFB8E4CC01D8438A-0J0gbvR4kThpB2pF5aRoyrfspsVTdybXVpNB7YpNyf8@public.gmane.org> 0 siblings, 1 reply; 5+ messages in thread From: Liu, Jijiang @ 2014-10-30 12:59 UTC (permalink / raw) To: Murillo, dev-VfR2kkLFssw@public.gmane.org ">" was missed in the following command. echo 2048 > /sys/kernel/mm/dom0-mm/memsize-mB/memsize > -----Original Message----- > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Murillo > Sent: Thursday, October 30, 2014 6:27 PM > To: dev@dpdk.org > Subject: [dpdk-dev] DPDK xen-dom0 not working at all > > English is not my native language; please excuse typing errors. > > > I am new to DPDK with Xen, but I am able to run DPDK applications without xen > using hugepages. But when I try to do it in xen-dom0 it does not work. Let me > explain: > > > I have followed the intructions on the Getting Started Guide, so I execute the next > steps: > > > Dpdk/config/common_linuxapp > > CONFIG_RTE_LIBRTE_XEN_DOM0=y > > make config T=x86_64-native-linuxapp-gcc > > make install T=x86_64-native-linuxapp-gcc > > sudo modprobe uio > > sudo insmod x86_64-native-linuxapp-gcc/kmod/igb_uio.ko > > sudo insmod x86_64-native-linuxapp-gcc/kmod/rte_dom0_mm.ko > rsv_memsize=2048 > > echo 2048 /sys/kernel/mm/dom0-mm/memsize-mB/memsize > > tools/dpdk_nic_bind.py --bind=igb_uio $(tools/dpdk_nic_bind.py --status > | sed -rn 's,.* if=([^ ]*).*igb_uio *$,\1,p') > > > > The main problem appears when I try to execute helloworld for example. > > Sudo ./build/helloworld -c 0xf -n 2 –xen-dom0 > > Output: > > EAL: Detected lcore 0 as core 0 on socket 0 > > EAL: Detected lcore 1 as core 0 on socket 0 > > EAL: Detected lcore 2 as core 1 on socket 0 > > … > > EAL: Detected lcore 39 as core 12 on socket 0 > > EAL: Support maximum 64 logical core(s) by configuration. > > EAL: Detected 40 lcore(s) > > And it stops. > > > > If I execute dmegs I get the following: > > [ 1098.120193] helloworld[20116] trap invalid opcode ip:45adb7 > sp:7fff4cf7e150 error:0 in helloworld[400000+115000] > > > > Here are the characteristics of the server: > > DPDK 1.7.1 > > xm info: > > host : vh05 > > release : 3.5.0-47-generic > > version : #71~precise1-Ubuntu SMP Wed Feb 19 22:02:52 UTC 2014 > > machine : x86_64 > > nr_cpus : 40 > > nr_nodes : 2 > > cores_per_socket : 10 > > threads_per_core : 2 > > cpu_mhz : 3000 > > hw_caps : > bfebfbff:2c100800:00000000:00007f40:73bee3ff:00000000:00000001:00000281 > > virt_caps : hvm hvm_directio > > total_memory : 32722 > > free_memory : 28196 > > free_cpus : 0 > > xen_major : 4 > > xen_minor : 1 > > xen_extra : .5 > > xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p > hvm-3.0-x86_64 > > xen_scheduler : credit > > xen_pagesize : 4096 > > platform_params : virt_start=0xffff800000000000 > > xen_changeset : unavailable > > xen_commandline : placeholder dom0_mem=4096M max_loop=64 > > cc_compiler : gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) > > cc_compile_by : stefan.bader > > cc_compile_domain : canonical.com > > cc_compile_date : Wed Feb 19 15:32:59 UTC 2014 > > xend_config_format : 4 > > > > Thank you in anvanced. > > > > > > > > > > ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <1ED644BD7E0A5F4091CF203DAFB8E4CC01D8438A-0J0gbvR4kThpB2pF5aRoyrfspsVTdybXVpNB7YpNyf8@public.gmane.org>]
* Re: DPDK xen-dom0 not working at all [not found] ` <1ED644BD7E0A5F4091CF203DAFB8E4CC01D8438A-0J0gbvR4kThpB2pF5aRoyrfspsVTdybXVpNB7YpNyf8@public.gmane.org> @ 2014-10-30 15:10 ` Murillo [not found] ` <545254FE.3080200-+ngl/9zrRLQ@public.gmane.org> 0 siblings, 1 reply; 5+ messages in thread From: Murillo @ 2014-10-30 15:10 UTC (permalink / raw) To: dev-VfR2kkLFssw I am sorry, I missed it during the redaction of the email. I executed it correcly. When I do "cat /sys/kernel/mm/dom0-mm/memsize-mB/memsize" it prints 2048. Thank you for your answer and your time. El 30/10/14 a las 13:59, Liu, Jijiang escribió: > ">" was missed in the following command. > > echo 2048 > /sys/kernel/mm/dom0-mm/memsize-mB/memsize > >> -----Original Message----- >> From: dev [mailto:dev-bounces-VfR2kkLFssw@public.gmane.org] On Behalf Of Murillo >> Sent: Thursday, October 30, 2014 6:27 PM >> To: dev-VfR2kkLFssw@public.gmane.org >> Subject: [dpdk-dev] DPDK xen-dom0 not working at all >> >> English is not my native language; please excuse typing errors. >> >> >> I am new to DPDK with Xen, but I am able to run DPDK applications without xen >> using hugepages. But when I try to do it in xen-dom0 it does not work. Let me >> explain: >> >> >> I have followed the intructions on the Getting Started Guide, so I execute the next >> steps: >> >> >> Dpdk/config/common_linuxapp >> >> CONFIG_RTE_LIBRTE_XEN_DOM0=y >> >> make config T=x86_64-native-linuxapp-gcc >> >> make install T=x86_64-native-linuxapp-gcc >> >> sudo modprobe uio >> >> sudo insmod x86_64-native-linuxapp-gcc/kmod/igb_uio.ko >> >> sudo insmod x86_64-native-linuxapp-gcc/kmod/rte_dom0_mm.ko >> rsv_memsize=2048 >> >> echo 2048 /sys/kernel/mm/dom0-mm/memsize-mB/memsize >> >> tools/dpdk_nic_bind.py --bind=igb_uio $(tools/dpdk_nic_bind.py --status >> | sed -rn 's,.* if=([^ ]*).*igb_uio *$,\1,p') >> >> >> >> The main problem appears when I try to execute helloworld for example. >> >> Sudo ./build/helloworld -c 0xf -n 2 –xen-dom0 >> >> Output: >> >> EAL: Detected lcore 0 as core 0 on socket 0 >> >> EAL: Detected lcore 1 as core 0 on socket 0 >> >> EAL: Detected lcore 2 as core 1 on socket 0 >> >> … >> >> EAL: Detected lcore 39 as core 12 on socket 0 >> >> EAL: Support maximum 64 logical core(s) by configuration. >> >> EAL: Detected 40 lcore(s) >> >> And it stops. >> >> >> >> If I execute dmegs I get the following: >> >> [ 1098.120193] helloworld[20116] trap invalid opcode ip:45adb7 >> sp:7fff4cf7e150 error:0 in helloworld[400000+115000] >> >> >> >> Here are the characteristics of the server: >> >> DPDK 1.7.1 >> >> xm info: >> >> host : vh05 >> >> release : 3.5.0-47-generic >> >> version : #71~precise1-Ubuntu SMP Wed Feb 19 22:02:52 UTC 2014 >> >> machine : x86_64 >> >> nr_cpus : 40 >> >> nr_nodes : 2 >> >> cores_per_socket : 10 >> >> threads_per_core : 2 >> >> cpu_mhz : 3000 >> >> hw_caps : >> bfebfbff:2c100800:00000000:00007f40:73bee3ff:00000000:00000001:00000281 >> >> virt_caps : hvm hvm_directio >> >> total_memory : 32722 >> >> free_memory : 28196 >> >> free_cpus : 0 >> >> xen_major : 4 >> >> xen_minor : 1 >> >> xen_extra : .5 >> >> xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p >> hvm-3.0-x86_64 >> >> xen_scheduler : credit >> >> xen_pagesize : 4096 >> >> platform_params : virt_start=0xffff800000000000 >> >> xen_changeset : unavailable >> >> xen_commandline : placeholder dom0_mem=4096M max_loop=64 >> >> cc_compiler : gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) >> >> cc_compile_by : stefan.bader >> >> cc_compile_domain : canonical.com >> >> cc_compile_date : Wed Feb 19 15:32:59 UTC 2014 >> >> xend_config_format : 4 >> >> >> >> Thank you in anvanced. >> >> >> >> >> >> >> >> >> >> ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <545254FE.3080200-+ngl/9zrRLQ@public.gmane.org>]
* Re: DPDK xen-dom0 not working at all [not found] ` <545254FE.3080200-+ngl/9zrRLQ@public.gmane.org> @ 2014-11-03 2:47 ` Liu, Jijiang [not found] ` <1ED644BD7E0A5F4091CF203DAFB8E4CC01D84914-0J0gbvR4kThpB2pF5aRoyrfspsVTdybXVpNB7YpNyf8@public.gmane.org> 0 siblings, 1 reply; 5+ messages in thread From: Liu, Jijiang @ 2014-11-03 2:47 UTC (permalink / raw) To: Murillo; +Cc: dev-VfR2kkLFssw@public.gmane.org You are using Xen 4.1.5, and try to do following change In dpdk/config/defconfig_x86_64-native-linuxapp-gcc(assuming you use x86_64-native-linuxapp-gcc to compile). Change CONFIG_RTE_MACHINE="native" To CONFIG_RTE_MACHINE="default" > -----Original Message----- > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Murillo > Sent: Thursday, October 30, 2014 11:11 PM > To: dev@dpdk.org > Subject: Re: [dpdk-dev] DPDK xen-dom0 not working at all > > I am sorry, I missed it during the redaction of the email. I executed it correcly. > When I do "cat /sys/kernel/mm/dom0-mm/memsize-mB/memsize" it prints > 2048. > > Thank you for your answer and your time. > > El 30/10/14 a las 13:59, Liu, Jijiang escribió: > > ">" was missed in the following command. > > > > echo 2048 > /sys/kernel/mm/dom0-mm/memsize-mB/memsize > > > >> -----Original Message----- > >> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Murillo > >> Sent: Thursday, October 30, 2014 6:27 PM > >> To: dev@dpdk.org > >> Subject: [dpdk-dev] DPDK xen-dom0 not working at all > >> > >> English is not my native language; please excuse typing errors. > >> > >> > >> I am new to DPDK with Xen, but I am able to run DPDK applications > >> without xen using hugepages. But when I try to do it in xen-dom0 it > >> does not work. Let me > >> explain: > >> > >> > >> I have followed the intructions on the Getting Started Guide, so I > >> execute the next > >> steps: > >> > >> > >> Dpdk/config/common_linuxapp > >> > >> CONFIG_RTE_LIBRTE_XEN_DOM0=y > >> > >> make config T=x86_64-native-linuxapp-gcc > >> > >> make install T=x86_64-native-linuxapp-gcc > >> > >> sudo modprobe uio > >> > >> sudo insmod x86_64-native-linuxapp-gcc/kmod/igb_uio.ko > >> > >> sudo insmod x86_64-native-linuxapp-gcc/kmod/rte_dom0_mm.ko > >> rsv_memsize=2048 > >> > >> echo 2048 /sys/kernel/mm/dom0-mm/memsize-mB/memsize > >> > >> tools/dpdk_nic_bind.py --bind=igb_uio $(tools/dpdk_nic_bind.py > >> --status > >> | sed -rn 's,.* if=([^ ]*).*igb_uio *$,\1,p') > >> > >> > >> > >> The main problem appears when I try to execute helloworld for example. > >> > >> Sudo ./build/helloworld -c 0xf -n 2 –xen-dom0 > >> > >> Output: > >> > >> EAL: Detected lcore 0 as core 0 on socket 0 > >> > >> EAL: Detected lcore 1 as core 0 on socket 0 > >> > >> EAL: Detected lcore 2 as core 1 on socket 0 > >> > >> … > >> > >> EAL: Detected lcore 39 as core 12 on socket 0 > >> > >> EAL: Support maximum 64 logical core(s) by configuration. > >> > >> EAL: Detected 40 lcore(s) > >> > >> And it stops. > >> > >> > >> > >> If I execute dmegs I get the following: > >> > >> [ 1098.120193] helloworld[20116] trap invalid opcode ip:45adb7 > >> sp:7fff4cf7e150 error:0 in helloworld[400000+115000] > >> > >> > >> > >> Here are the characteristics of the server: > >> > >> DPDK 1.7.1 > >> > >> xm info: > >> > >> host : vh05 > >> > >> release : 3.5.0-47-generic > >> > >> version : #71~precise1-Ubuntu SMP Wed Feb 19 22:02:52 UTC 2014 > >> > >> machine : x86_64 > >> > >> nr_cpus : 40 > >> > >> nr_nodes : 2 > >> > >> cores_per_socket : 10 > >> > >> threads_per_core : 2 > >> > >> cpu_mhz : 3000 > >> > >> hw_caps : > >> bfebfbff:2c100800:00000000:00007f40:73bee3ff:00000000:00000001:000002 > >> 81 > >> > >> virt_caps : hvm hvm_directio > >> > >> total_memory : 32722 > >> > >> free_memory : 28196 > >> > >> free_cpus : 0 > >> > >> xen_major : 4 > >> > >> xen_minor : 1 > >> > >> xen_extra : .5 > >> > >> xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 > >> hvm-3.0-x86_32p > >> hvm-3.0-x86_64 > >> > >> xen_scheduler : credit > >> > >> xen_pagesize : 4096 > >> > >> platform_params : virt_start=0xffff800000000000 > >> > >> xen_changeset : unavailable > >> > >> xen_commandline : placeholder dom0_mem=4096M max_loop=64 > >> > >> cc_compiler : gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) > >> > >> cc_compile_by : stefan.bader > >> > >> cc_compile_domain : canonical.com > >> > >> cc_compile_date : Wed Feb 19 15:32:59 UTC 2014 > >> > >> xend_config_format : 4 > >> > >> > >> > >> Thank you in anvanced. > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <1ED644BD7E0A5F4091CF203DAFB8E4CC01D84914-0J0gbvR4kThpB2pF5aRoyrfspsVTdybXVpNB7YpNyf8@public.gmane.org>]
* Re: DPDK xen-dom0 not working at all [not found] ` <1ED644BD7E0A5F4091CF203DAFB8E4CC01D84914-0J0gbvR4kThpB2pF5aRoyrfspsVTdybXVpNB7YpNyf8@public.gmane.org> @ 2014-11-03 8:58 ` Murillo 0 siblings, 0 replies; 5+ messages in thread From: Murillo @ 2014-11-03 8:58 UTC (permalink / raw) To: dev-VfR2kkLFssw Hello, Thank you for your help. It worked for me. El 03/11/14 a las 03:47, Liu, Jijiang escribió: > You are using Xen 4.1.5, and try to do following change In dpdk/config/defconfig_x86_64-native-linuxapp-gcc(assuming you use x86_64-native-linuxapp-gcc to compile). > > Change > CONFIG_RTE_MACHINE="native" > To > CONFIG_RTE_MACHINE="default" > > >> -----Original Message----- >> From: dev [mailto:dev-bounces-VfR2kkLFssw@public.gmane.org] On Behalf Of Murillo >> Sent: Thursday, October 30, 2014 11:11 PM >> To: dev-VfR2kkLFssw@public.gmane.org >> Subject: Re: [dpdk-dev] DPDK xen-dom0 not working at all >> >> I am sorry, I missed it during the redaction of the email. I executed it correcly. >> When I do "cat /sys/kernel/mm/dom0-mm/memsize-mB/memsize" it prints >> 2048. >> >> Thank you for your answer and your time. >> >> El 30/10/14 a las 13:59, Liu, Jijiang escribió: >>> ">" was missed in the following command. >>> >>> echo 2048 > /sys/kernel/mm/dom0-mm/memsize-mB/memsize >>> >>>> -----Original Message----- >>>> From: dev [mailto:dev-bounces-VfR2kkLFssw@public.gmane.org] On Behalf Of Murillo >>>> Sent: Thursday, October 30, 2014 6:27 PM >>>> To: dev-VfR2kkLFssw@public.gmane.org >>>> Subject: [dpdk-dev] DPDK xen-dom0 not working at all >>>> >>>> English is not my native language; please excuse typing errors. >>>> >>>> >>>> I am new to DPDK with Xen, but I am able to run DPDK applications >>>> without xen using hugepages. But when I try to do it in xen-dom0 it >>>> does not work. Let me >>>> explain: >>>> >>>> >>>> I have followed the intructions on the Getting Started Guide, so I >>>> execute the next >>>> steps: >>>> >>>> >>>> Dpdk/config/common_linuxapp >>>> >>>> CONFIG_RTE_LIBRTE_XEN_DOM0=y >>>> >>>> make config T=x86_64-native-linuxapp-gcc >>>> >>>> make install T=x86_64-native-linuxapp-gcc >>>> >>>> sudo modprobe uio >>>> >>>> sudo insmod x86_64-native-linuxapp-gcc/kmod/igb_uio.ko >>>> >>>> sudo insmod x86_64-native-linuxapp-gcc/kmod/rte_dom0_mm.ko >>>> rsv_memsize=2048 >>>> >>>> echo 2048 /sys/kernel/mm/dom0-mm/memsize-mB/memsize >>>> >>>> tools/dpdk_nic_bind.py --bind=igb_uio $(tools/dpdk_nic_bind.py >>>> --status >>>> | sed -rn 's,.* if=([^ ]*).*igb_uio *$,\1,p') >>>> >>>> >>>> >>>> The main problem appears when I try to execute helloworld for example. >>>> >>>> Sudo ./build/helloworld -c 0xf -n 2 –xen-dom0 >>>> >>>> Output: >>>> >>>> EAL: Detected lcore 0 as core 0 on socket 0 >>>> >>>> EAL: Detected lcore 1 as core 0 on socket 0 >>>> >>>> EAL: Detected lcore 2 as core 1 on socket 0 >>>> >>>> … >>>> >>>> EAL: Detected lcore 39 as core 12 on socket 0 >>>> >>>> EAL: Support maximum 64 logical core(s) by configuration. >>>> >>>> EAL: Detected 40 lcore(s) >>>> >>>> And it stops. >>>> >>>> >>>> >>>> If I execute dmegs I get the following: >>>> >>>> [ 1098.120193] helloworld[20116] trap invalid opcode ip:45adb7 >>>> sp:7fff4cf7e150 error:0 in helloworld[400000+115000] >>>> >>>> >>>> >>>> Here are the characteristics of the server: >>>> >>>> DPDK 1.7.1 >>>> >>>> xm info: >>>> >>>> host : vh05 >>>> >>>> release : 3.5.0-47-generic >>>> >>>> version : #71~precise1-Ubuntu SMP Wed Feb 19 22:02:52 UTC 2014 >>>> >>>> machine : x86_64 >>>> >>>> nr_cpus : 40 >>>> >>>> nr_nodes : 2 >>>> >>>> cores_per_socket : 10 >>>> >>>> threads_per_core : 2 >>>> >>>> cpu_mhz : 3000 >>>> >>>> hw_caps : >>>> bfebfbff:2c100800:00000000:00007f40:73bee3ff:00000000:00000001:000002 >>>> 81 >>>> >>>> virt_caps : hvm hvm_directio >>>> >>>> total_memory : 32722 >>>> >>>> free_memory : 28196 >>>> >>>> free_cpus : 0 >>>> >>>> xen_major : 4 >>>> >>>> xen_minor : 1 >>>> >>>> xen_extra : .5 >>>> >>>> xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 >>>> hvm-3.0-x86_32p >>>> hvm-3.0-x86_64 >>>> >>>> xen_scheduler : credit >>>> >>>> xen_pagesize : 4096 >>>> >>>> platform_params : virt_start=0xffff800000000000 >>>> >>>> xen_changeset : unavailable >>>> >>>> xen_commandline : placeholder dom0_mem=4096M max_loop=64 >>>> >>>> cc_compiler : gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) >>>> >>>> cc_compile_by : stefan.bader >>>> >>>> cc_compile_domain : canonical.com >>>> >>>> cc_compile_date : Wed Feb 19 15:32:59 UTC 2014 >>>> >>>> xend_config_format : 4 >>>> >>>> >>>> >>>> Thank you in anvanced. >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-11-03 8:58 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-10-30 10:26 DPDK xen-dom0 not working at all Murillo
[not found] ` <54521263.5020600-+ngl/9zrRLQ@public.gmane.org>
2014-10-30 12:59 ` Liu, Jijiang
[not found] ` <1ED644BD7E0A5F4091CF203DAFB8E4CC01D8438A-0J0gbvR4kThpB2pF5aRoyrfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2014-10-30 15:10 ` Murillo
[not found] ` <545254FE.3080200-+ngl/9zrRLQ@public.gmane.org>
2014-11-03 2:47 ` Liu, Jijiang
[not found] ` <1ED644BD7E0A5F4091CF203DAFB8E4CC01D84914-0J0gbvR4kThpB2pF5aRoyrfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2014-11-03 8:58 ` Murillo
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).