From mboxrd@z Thu Jan  1 00:00:00 1970
From: "Gonzalez Monroy, Sergio" <sergio.gonzalez.monroy-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Subject: Re: Not getting statistics for all queues.
Date: Fri, 06 Mar 2015 08:45:36 +0000
Message-ID: <54F96930.4000401@intel.com>
References: <CAMFpKOhoEnVvG3tx68vrhd41LXYF_D6uPRVyxGUxp3qbuq4_wQ@mail.gmail.com>
 <CAMFpKOi2cNFNNPCNnQ7=pzQM_6=uvr3MigB_+dpKCcUFTGmxsg@mail.gmail.com>
 <54F42A15.7040700@intel.com>
 <CAMFpKOi3Nbb7zk+n1Taa50JtJ48a8hZdP6V8TjrYtm9QJ=hEaw@mail.gmail.com>
 <CAMFpKOjruXOFPoVjLbK+vWTbzgJ7Mm7MKjrDhEpKFKBnxx-rYg@mail.gmail.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Cc: dev-VfR2kkLFssw@public.gmane.org
To: Alexandra Sava <alexandrasava18-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Return-path: <dev-bounces-VfR2kkLFssw@public.gmane.org>
In-Reply-To: <CAMFpKOjruXOFPoVjLbK+vWTbzgJ7Mm7MKjrDhEpKFKBnxx-rYg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
List-Id: patches and discussions about DPDK <dev.dpdk.org>
List-Unsubscribe: <http://dpdk.org/ml/options/dev>,
 <mailto:dev-request-VfR2kkLFssw@public.gmane.org?subject=unsubscribe>
List-Archive: <http://dpdk.org/ml/archives/dev/>
List-Post: <mailto:dev-VfR2kkLFssw@public.gmane.org>
List-Help: <mailto:dev-request-VfR2kkLFssw@public.gmane.org?subject=help>
List-Subscribe: <http://dpdk.org/ml/listinfo/dev>,
 <mailto:dev-request-VfR2kkLFssw@public.gmane.org?subject=subscribe>
Errors-To: dev-bounces-VfR2kkLFssw@public.gmane.org
Sender: "dev" <dev-bounces-VfR2kkLFssw@public.gmane.org>

On 05/03/2015 10:57, Alexandra Sava wrote:
> ping  :-) ? Any thoughts about this ?
>
Sorry for the delay.

I'm not able to reproduce your issue with testpmd app.
I gather that you are using your own app, have you tried to use testpmd 
to get queue stats?
If so, what command line options did you use?

Sergio
>
> Thanks,
> Alexandra
>
> On 2 March 2015 at 17:00, Alexandra Sava <alexandrasava18-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org 
> <mailto:alexandrasava18-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>> wrote:
>
>     Hi,
>
>     lspci command shows the following:
>     /04:00.0 Ethernet controller: Intel Corporation 82599EB 10-Gigabit
>     SFI/SFP+ Network Connection (rev 01)
>     Subsystem: Hewlett-Packard Company Ethernet 10Gb 2-port 560SFP+
>     Adapter/
>
>
>     Thanks,
>     Alexandra
>
>     On 2 March 2015 at 11:15, Gonzalez Monroy, Sergio
>     <sergio.gonzalez.monroy-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org
>     <mailto:sergio.gonzalez.monroy-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>> wrote:
>
>         Hi Alexandra,
>
>
>         On 02/03/2015 08:50, Alexandra Sava wrote:
>
>             Hi guys,
>
>             Did you have a chance to look over my question?
>
>
>
>             Thanks,
>             Alexandra
>
>
>             On 24 February 2015 at 13:14, Alexandra Sava
>             <alexandrasava18-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
>             <mailto:alexandrasava18-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>> wrote:
>
>                 Hi guys,
>
>                 I'm trying to get statistics per queue (on rx side),
>                 therefore I'm
>                 using rte_eth_dev_set_rx_queue_stats_mapping
>                 function in order to map a particular queue to a stat
>                 index (Note: I
>                 have 4 rx queues with the following mapping: queue 0
>                 -> stat_idx 0;
>                 queue 1 -> stat_idx 1 , etc).
>                 The problem is that I only get statistics for the
>                 first queue (in this
>                 case, queue 0), the rest of them are 0. Also, the
>                 statistics for the first
>                 queue are equal to the total statistics, so
>                 rte_eth_stats.ipackets
>                 is equal to rte_eth_stats.q_ipackets[0] and
>                 rte_eth_stats.ibytes is
>                 equal to rte_eth_stats.q_ibytes[0].
>
>                 I'm using dpdk-1.8.0, Ubuntu 12.04, Intel x86_64
>                 architecture.
>
>                 Any idea about this issue ?
>
>         What NIC are you using?
>
>         Sergio
>
>
>
>                 Thanks,
>                 Alexandra
>
>
>