From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vlad Zolotarov Subject: Re: [PATCH v8 0/3]: Add LRO support to ixgbe PMD Date: Sun, 29 Mar 2015 11:57:19 +0300 Message-ID: <5517BE6F.3000605@cloudius-systems.com> References: <1426701144-21231-1-git-send-email-vladz@cloudius-systems.com> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit To: dev-VfR2kkLFssw@public.gmane.org Return-path: In-Reply-To: <1426701144-21231-1-git-send-email-vladz-RmZWMc9puTNJc61us3aD9laTQe2KTcn/@public.gmane.org> List-Id: patches and discussions about DPDK List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces-VfR2kkLFssw@public.gmane.org Sender: "dev" On 03/18/15 19:52, Vlad Zolotarov wrote: > This series adds the missing flow for enabling the LRO in the ethdev and > adds a support for this feature in the ixgbe PMD. There is a big hope that this > initiative is going to be picked up by some Intel developer that would add the LRO support > to other Intel PMDs. > > The series starts with some cleanup work in the code the final patch (the actual adding of > the LRO support) is going to touch/use/change. There are still quite a few issues in the ixgbe > PMD code left but they have to be a matter of a different series and I've left a few "TODO" > remarks in the code. > > The LRO ("RSC" in Intel's context) PMD completion handling code follows the same design as the > corresponding Linux and FreeBSD implementation: pass the aggregation's cluster HEAD buffer to > the NEXTP entry of the software ring till EOP is met. > > HW configuration follows the corresponding specs: this feature is supported only by x540 and > 82599 PF devices. > > The feature has been tested with seastar TCP stack with the following configuration on Tx side: > - MTU: 400B > - 100 concurrent TCP connections. > > The results were: > - Without LRO: total throughput: 0.12Gbps, coefficient of variance: 1.41% > - With LRO: total throughput: 8.21Gbps, coefficient of variance: 0.59% > > This is an almost factor 80 improvement. ping > > New in v8: > - Fixed the structs naming: igb_xxx -> ixgbe_xxx (some leftovers in PATCH2). > - Took the RSC configuration code from ixgbe_dev_rx_init() into a separate > function - ixgbe_set_rsc(). > - Added some missing macros for HW configuration. > - Styling adjustments: > - Functions names. > - Functions descriptions. > - Reworked the ixgbe_free_rsc_cluster() code to make it more readable. > - Kill the HEADER_SPLIT flow in ixgbe_set_rsc() since it's not supported by > ixgbe PMD. > > New in v7: > - Free not-yet-completed RSC aggregations in rte_eth_dev_stop() flow. > - Fixed rx_bulk_alloc_allowed and rx_vec_allowed initialization: > - Don't set them to FALSE in rte_eth_dev_stop() flow - the following > rte_eth_dev_start() will need them. > - Reset them to TRUE in rte_eth_dev_configure() and not in a probe() flow. > This will ensure the proper behaviour if port is re-configured. > - Reset the sw_ring[].mbuf entry in a bulk allocation case. > This is needed for ixgbe_rx_queue_release_mbufs(). > - _recv_pkts_lro(): added the missing memory barrier before RDT update in a > non-bulk allocation case. > - Don't allow RSC when device is configured in an SR-IOV mode. > > New in v6: > - Fix of the typo in the "bug fixes" series that broke the compilation caused a > minor change in this follow-up series. > > New in v5: > - Split the series into "bug fixes" and "all the rest" so that the former could be > integrated into a 2.0 release. > - Put the RTE_ETHDEV_HAS_LRO_SUPPORT definition at the beginning of rte_ethdev.h. > - Removed the "TODO: Remove me" comment near RTE_ETHDEV_HAS_LRO_SUPPORT. > > New in v4: > - Remove CONFIG_RTE_ETHDEV_LRO_SUPPORT from config/common_linuxapp. > - Define RTE_ETHDEV_HAS_LRO_SUPPORT in rte_ethdev.h. > - As a result of "ixgbe: check rxd number to avoid mbuf leak" (352078e8e) Vector Rx > had to get the same treatment as Rx Bulk Alloc (see PATCH4 for more details). > > New in v3: > - ixgbe_rx_alloc_bufs(): Always reset refcnt of the buffers to 1. Otherwise rte_pktmbuf_free() > won't free them. > > New in v2: > - Removed rte_eth_dev_data.lro_bulk_alloc and added ixgbe_hw.rx_bulk_alloc_allowed > instead. > - Unified the rx_pkt_bulk callback setting (a separate new patch). > - Fixed a few styling and spelling issues. > > > Vlad Zolotarov (3): > ixgbe: Cleanups > ixgbe: Code refactoring > ixgbe: Add LRO support > > lib/librte_ether/rte_ethdev.h | 9 +- > lib/librte_net/rte_ip.h | 3 + > lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h | 6 + > lib/librte_pmd_ixgbe/ixgbe_ethdev.c | 11 + > lib/librte_pmd_ixgbe/ixgbe_ethdev.h | 5 + > lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 766 +++++++++++++++++++++++++++++--- > lib/librte_pmd_ixgbe/ixgbe_rxtx.h | 6 + > 7 files changed, 737 insertions(+), 69 deletions(-) >