[PATCH 0/2] Enable DCB in SRIOV mode for ixgbe driver

[PATCH 0/2] Enable DCB in SRIOV mode for ixgbe driver

[Michal Jastrzebski]

Date: Mon, 12 Jan 2015 15:39:39 +0100
Message-Id: <1421073581-6644-1-git-send-email-michalx.k.jastrzebski-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
X-Mailer: git-send-email 2.1.1

From: Pawel Wodkowski <pawelx.wodkowski-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>


Hi,

this patchset enables DCB in SRIOV (ETH_MQ_RX_VMDQ_DCB and ETH_MQ_TX_VMDQ_DCB)

for each VF and PF for ixgbe driver.



As a side effect this allow to use multiple queues for TX in VF (8 if there is

16 or less VFs or 4 if there is 32 or less VFs) when PFC is not enabled.





Pawel Wodkowski (2):

  pmd: add DCB for VF for ixgbe

  testpmd: fix dcb in vt mode



 app/test-pmd/cmdline.c              |    4 +-

 app/test-pmd/testpmd.c              |   39 ++++++++++----

 app/test-pmd/testpmd.h              |   10 ----

 lib/librte_ether/rte_ethdev.c       |   84 +++++++++++++++++++++---------

 lib/librte_ether/rte_ethdev.h       |    5 +-

 lib/librte_pmd_e1000/igb_pf.c       |    3 +-

 lib/librte_pmd_ixgbe/ixgbe_ethdev.c |   10 ++--

 lib/librte_pmd_ixgbe/ixgbe_ethdev.h |    1 +

 lib/librte_pmd_ixgbe/ixgbe_pf.c     |   98 ++++++++++++++++++++++++++++++-----

 lib/librte_pmd_ixgbe/ixgbe_rxtx.c   |    7 ++-

 10 files changed, 190 insertions(+), 71 deletions(-)



-- 

1.7.9.5

Re: [PATCH 0/2] Enable DCB in SRIOV mode for ixgbe driver

[Jastrzebski, MichalX K]

> -----Original Message-----
> From: dev [mailto:dev-bounces-VfR2kkLFssw@public.gmane.org] On Behalf Of Michal Jastrzebski
> Sent: Monday, January 12, 2015 3:41 PM
> To: dev-VfR2kkLFssw@public.gmane.org
> Subject: [dpdk-dev] [PATCH 0/2] Enable DCB in SRIOV mode for ixgbe driver
> 
> Date: Mon, 12 Jan 2015 15:39:39 +0100
> Message-Id: <1421073581-6644-1-git-send-email-
> michalx.k.jastrzebski-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> X-Mailer: git-send-email 2.1.1
> 
> From: Pawel Wodkowski <pawelx.wodkowski-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> 
> 
> Hi,
> 
> this patchset enables DCB in SRIOV (ETH_MQ_RX_VMDQ_DCB and
> ETH_MQ_TX_VMDQ_DCB)
> 
> for each VF and PF for ixgbe driver.
> 
> 
> 
> As a side effect this allow to use multiple queues for TX in VF (8 if there is
> 
> 16 or less VFs or 4 if there is 32 or less VFs) when PFC is not enabled.
> 
> 
> 
> 
> 
> Pawel Wodkowski (2):
> 
>   pmd: add DCB for VF for ixgbe
> 
>   testpmd: fix dcb in vt mode
> 
> 
> 
>  app/test-pmd/cmdline.c              |    4 +-
> 
>  app/test-pmd/testpmd.c              |   39 ++++++++++----
> 
>  app/test-pmd/testpmd.h              |   10 ----
> 
>  lib/librte_ether/rte_ethdev.c       |   84 +++++++++++++++++++++---------
> 
>  lib/librte_ether/rte_ethdev.h       |    5 +-
> 
>  lib/librte_pmd_e1000/igb_pf.c       |    3 +-
> 
>  lib/librte_pmd_ixgbe/ixgbe_ethdev.c |   10 ++--
> 
>  lib/librte_pmd_ixgbe/ixgbe_ethdev.h |    1 +
> 
>  lib/librte_pmd_ixgbe/ixgbe_pf.c     |   98 ++++++++++++++++++++++++++++++--
> ---
> 
>  lib/librte_pmd_ixgbe/ixgbe_rxtx.c   |    7 ++-
> 
>  10 files changed, 190 insertions(+), 71 deletions(-)
> 
> 
> 
> --
> 
> 1.7.9.5
> 
> 
Self nacked - because of wrong message format.

[PATCH 0/2] Enable DCB in SRIOV mode for ixgbe driver

[Michal Jastrzebski]

From: Pawel Wodkowski <pawelx.wodkowski-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>

Hi,
this patchset enables DCB in SRIOV (ETH_MQ_RX_VMDQ_DCB and ETH_MQ_TX_VMDQ_DCB)
for each VF and PF for ixgbe driver.

As a side effect this allow to use multiple queues for TX in VF (8 if there is
16 or less VFs or 4 if there is 32 or less VFs) when PFC is not enabled.


Pawel Wodkowski (2):
  pmd: add DCB for VF for ixgbe
  testpmd: fix dcb in vt mode

 app/test-pmd/cmdline.c              |    4 +-
 app/test-pmd/testpmd.c              |   39 ++++++++++----
 app/test-pmd/testpmd.h              |   10 ----
 lib/librte_ether/rte_ethdev.c       |   84 +++++++++++++++++++++---------
 lib/librte_ether/rte_ethdev.h       |    5 +-
 lib/librte_pmd_e1000/igb_pf.c       |    3 +-
 lib/librte_pmd_ixgbe/ixgbe_ethdev.c |   10 ++--
 lib/librte_pmd_ixgbe/ixgbe_ethdev.h |    1 +
 lib/librte_pmd_ixgbe/ixgbe_pf.c     |   98 ++++++++++++++++++++++++++++++-----
 lib/librte_pmd_ixgbe/ixgbe_rxtx.c   |    7 ++-
 10 files changed, 190 insertions(+), 71 deletions(-)

-- 
1.7.9.5

Re: [PATCH 0/2] Enable DCB in SRIOV mode for ixgbe driver

[Wodkowski, PawelX]

Comments are more than welcome :)

Pawel

Re: [PATCH 0/2] Enable DCB in SRIOV mode for ixgbe driver

[Vlad Zolotarov]

On 01/12/15 17:50, Michal Jastrzebski wrote:
> From: Pawel Wodkowski <pawelx.wodkowski-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
>
> Hi,
> this patchset enables DCB in SRIOV (ETH_MQ_RX_VMDQ_DCB and ETH_MQ_TX_VMDQ_DCB)
> for each VF and PF for ixgbe driver.
>
> As a side effect this allow to use multiple queues for TX in VF (8 if there is
> 16 or less VFs or 4 if there is 32 or less VFs) when PFC is not enabled.

Here it is! ;) Thanks. Pls., ignore my previous email about the 
respinning... ;)

>
>
> Pawel Wodkowski (2):
>    pmd: add DCB for VF for ixgbe
>    testpmd: fix dcb in vt mode
>
>   app/test-pmd/cmdline.c              |    4 +-
>   app/test-pmd/testpmd.c              |   39 ++++++++++----
>   app/test-pmd/testpmd.h              |   10 ----
>   lib/librte_ether/rte_ethdev.c       |   84 +++++++++++++++++++++---------
>   lib/librte_ether/rte_ethdev.h       |    5 +-
>   lib/librte_pmd_e1000/igb_pf.c       |    3 +-
>   lib/librte_pmd_ixgbe/ixgbe_ethdev.c |   10 ++--
>   lib/librte_pmd_ixgbe/ixgbe_ethdev.h |    1 +
>   lib/librte_pmd_ixgbe/ixgbe_pf.c     |   98 ++++++++++++++++++++++++++++++-----
>   lib/librte_pmd_ixgbe/ixgbe_rxtx.c   |    7 ++-
>   10 files changed, 190 insertions(+), 71 deletions(-)
>