* Error while compiling DPDK
@ 2014-07-14 0:24 BYEONG-GI KIM
[not found] ` <CAEHt_JY7+sLzAUhNOt8dZ6amaWNLz4nAz8JeSyW8w=7EH4AFXw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 11+ messages in thread
From: BYEONG-GI KIM @ 2014-07-14 0:24 UTC (permalink / raw)
To: Dpdk-ovs-hn68Rpc1hR1g9hUCZPvPmw, dev-VfR2kkLFssw
Hello.
An error occured while compiling DPDK 1.6.0r2 as below:
[root@compute dpdk-1.6.0r2]# make install T=x86_64*gcc
...Installing...
/ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c: In function
‘rte_eal_init’:
/ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c:873:2: error:
format ‘%p’ expects argument of type ‘void *’, but argument 5 has type
‘pthread_t’ [-Werror=format=]
RTE_LOG(DEBUG, EAL, "Master core %u is ready (tid=%p)\n",
^
The current OS is Fedora20. What should I do?...
Best regards
Byeong-Gi KIM
^ permalink raw reply [flat|nested] 11+ messages in thread[parent not found: <CAEHt_JY7+sLzAUhNOt8dZ6amaWNLz4nAz8JeSyW8w=7EH4AFXw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: Error while compiling DPDK [not found] ` <CAEHt_JY7+sLzAUhNOt8dZ6amaWNLz4nAz8JeSyW8w=7EH4AFXw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2014-07-14 1:00 ` Choi, Sy Jong [not found] ` <697F8B1B48670548A5BAB03E8283550F2D2FFC0D-j2khPEwRog0LtBVenmexd7fspsVTdybXVpNB7YpNyf8@public.gmane.org> 2014-07-14 11:46 ` Neil Horman 1 sibling, 1 reply; 11+ messages in thread From: Choi, Sy Jong @ 2014-07-14 1:00 UTC (permalink / raw) To: 'BYEONG-GI KIM', 'Dpdk-ovs-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org', 'dev-VfR2kkLFssw@public.gmane.org' Hi Mr. Kim, Please do not compile with "T=x86*gcc" because it will compile BSD app too, which cause the error. Please complile only the configuration you need. This should remove the error. Regards, Choi, Sy Jong -----Original Message----- From: BYEONG-GI KIM [kimbyeonggi@gmail.com<mailto:kimbyeonggi@gmail.com>] Sent: Monday, July 14, 2014 08:25 AM Malay Peninsula Standard Time To: Dpdk-ovs@lists.01.org; dev@dpdk.org Subject: [dpdk-dev] Error while compiling DPDK Hello. An error occured while compiling DPDK 1.6.0r2 as below: [root@compute dpdk-1.6.0r2]# make install T=x86_64*gcc ...Installing... /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c: In function ‘rte_eal_init’: /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c:873:2: error: format ‘%p’ expects argument of type ‘void *’, but argument 5 has type ‘pthread_t’ [-Werror=format=] RTE_LOG(DEBUG, EAL, "Master core %u is ready (tid=%p)\n", ^ The current OS is Fedora20. What should I do?... Best regards Byeong-Gi KIM ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <697F8B1B48670548A5BAB03E8283550F2D2FFC0D-j2khPEwRog0LtBVenmexd7fspsVTdybXVpNB7YpNyf8@public.gmane.org>]
* Re: Error while compiling DPDK [not found] ` <697F8B1B48670548A5BAB03E8283550F2D2FFC0D-j2khPEwRog0LtBVenmexd7fspsVTdybXVpNB7YpNyf8@public.gmane.org> @ 2014-07-14 1:24 ` BYEONG-GI KIM [not found] ` <CAEHt_JaR66oMk1V-_Fgh6UPGEmedDrOzawkvo9G-75nEKo-gnA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 0 siblings, 1 reply; 11+ messages in thread From: BYEONG-GI KIM @ 2014-07-14 1:24 UTC (permalink / raw) To: Choi, Sy Jong; +Cc: dev-VfR2kkLFssw, Dpdk-ovs-hn68Rpc1hR1g9hUCZPvPmw Dear choi, Thank you for the reply. I've been trying to install DPDK while changing the command as you mentioned, i.e., I used T=x86_64-default-linuxapp-gcc, but error was still shown; [root@compute DPDK-1.6.0]# make install T=x86_64-default-linuxapp-gcc ================== Installing x86_64-default-linuxapp-gcc Configuration done == Build scripts == Build scripts/testhost HOSTCC testhost.o HOSTLD testhost INSTALL-HOSTAPP testhost == Build lib == Build lib/librte_eal == Build lib/librte_eal/common SYMLINK-FILE include/rte_atomic.h SYMLINK-FILE include/rte_branch_prediction.h SYMLINK-FILE include/rte_byteorder.h SYMLINK-FILE include/rte_common.h SYMLINK-FILE include/rte_cycles.h SYMLINK-FILE include/rte_debug.h SYMLINK-FILE include/rte_eal.h SYMLINK-FILE include/rte_errno.h SYMLINK-FILE include/rte_launch.h SYMLINK-FILE include/rte_lcore.h SYMLINK-FILE include/rte_log.h SYMLINK-FILE include/rte_memcpy.h SYMLINK-FILE include/rte_memory.h SYMLINK-FILE include/rte_memzone.h SYMLINK-FILE include/rte_pci.h SYMLINK-FILE include/rte_pci_dev_ids.h SYMLINK-FILE include/rte_per_lcore.h SYMLINK-FILE include/rte_prefetch.h SYMLINK-FILE include/rte_random.h SYMLINK-FILE include/rte_rwlock.h SYMLINK-FILE include/rte_spinlock.h SYMLINK-FILE include/rte_tailq.h SYMLINK-FILE include/rte_interrupts.h SYMLINK-FILE include/rte_alarm.h SYMLINK-FILE include/rte_string_fns.h SYMLINK-FILE include/rte_cpuflags.h SYMLINK-FILE include/rte_version.h SYMLINK-FILE include/rte_tailq_elem.h SYMLINK-FILE include/rte_eal_memconfig.h SYMLINK-FILE include/rte_malloc_heap.h SYMLINK-FILE include/rte_hexdump.h SYMLINK-FILE include/arch/rte_atomic.h == Build lib/librte_eal/linuxapp == Build lib/librte_eal/linuxapp/igb_uio LD /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/built-in.o CC [M] /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.o Building modules, stage 2. MODPOST 1 modules CC /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.mod.o LD [M] /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.ko INSTALL-MODULE igb_uio.ko == Build lib/librte_eal/linuxapp/eal CC eal.o gcc: error: –g: 그런 파일이나 디렉터리가 없습니다 make[7]: *** [eal.o] 오류 1 make[6]: *** [eal] 오류 2 make[5]: *** [linuxapp] 오류 2 make[4]: *** [librte_eal] 오류 2 make[3]: *** [lib] 오류 2 make[2]: *** [all] 오류 2 make[1]: *** [x86_64-default-linuxapp-gcc_install] 오류 2 make: *** [install] 오류 2 I'm sorry for the Korean characteristics. It was shown because My Fedora OS is set to use Korean as a default language. I set two environmental variables following the intel-dpdk-programmers-guide.pdf as below: export RTE_SDK=/home/stack/dpdk/DPDK-1.6.0 export RTE_TARGET=x86_64-native-linuxapp-gcc What should I do in order to install DPDK successfully?... Thanks in advance. Best regards Byeong-Gi KIM 2014-07-14 10:00 GMT+09:00 Choi, Sy Jong <sy.jong.choi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>: > Hi Mr. Kim, > > Please do not compile with "T=x86*gcc" because it will compile BSD app > too, which cause the error. > > Please complile only the configuration you need. This should remove the > error. > > > Regards, > Choi, Sy Jong > > > -----Original Message----- > *From: *BYEONG-GI KIM [kimbyeonggi-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org] > *Sent: *Monday, July 14, 2014 08:25 AM Malay Peninsula Standard Time > *To: *Dpdk-ovs-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org; dev-VfR2kkLFssw@public.gmane.org > *Subject: *[dpdk-dev] Error while compiling DPDK > > Hello. > > An error occured while compiling DPDK 1.6.0r2 as below: > > [root@compute dpdk-1.6.0r2]# make install T=x86_64*gcc > ...Installing... > /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c: In function > ‘rte_eal_init’: > /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c:873:2: error: > format ‘%p’ expects argument of type ‘void *’, but argument 5 has type > ‘pthread_t’ [-Werror=format=] > RTE_LOG(DEBUG, EAL, "Master core %u is ready (tid=%p)\n", > ^ > > The current OS is Fedora20. What should I do?... > > Best regards > > Byeong-Gi KIM > ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <CAEHt_JaR66oMk1V-_Fgh6UPGEmedDrOzawkvo9G-75nEKo-gnA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: Error while compiling DPDK [not found] ` <CAEHt_JaR66oMk1V-_Fgh6UPGEmedDrOzawkvo9G-75nEKo-gnA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2014-07-14 2:02 ` Masaru Oki [not found] ` <CAFLKUz+hiZ829tVbLUz14zM2=JjR1Dv8vK=iH4iq-Y2Rqk_ahg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 0 siblings, 1 reply; 11+ messages in thread From: Masaru Oki @ 2014-07-14 2:02 UTC (permalink / raw) To: BYEONG-GI KIM Cc: <dev-VfR2kkLFssw@public.gmane.org>, Dpdk-ovs-hn68Rpc1hR1g9hUCZPvPmw > I'm sorry for the Korean characteristics. It was shown because My Fedora OS > is set to use Korean as a default language. Try env LANG=C make install ... 2014-07-14 10:24 GMT+09:00 BYEONG-GI KIM <kimbyeonggi-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>: > Dear choi, > > Thank you for the reply. > > I've been trying to install DPDK while changing the command as you > mentioned, i.e., I used T=x86_64-default-linuxapp-gcc, but error was still > shown; > > > [root@compute DPDK-1.6.0]# make install T=x86_64-default-linuxapp-gcc > ================== Installing x86_64-default-linuxapp-gcc > Configuration done > == Build scripts > == Build scripts/testhost > HOSTCC testhost.o > HOSTLD testhost > INSTALL-HOSTAPP testhost > == Build lib > == Build lib/librte_eal > == Build lib/librte_eal/common > SYMLINK-FILE include/rte_atomic.h > SYMLINK-FILE include/rte_branch_prediction.h > SYMLINK-FILE include/rte_byteorder.h > SYMLINK-FILE include/rte_common.h > SYMLINK-FILE include/rte_cycles.h > SYMLINK-FILE include/rte_debug.h > SYMLINK-FILE include/rte_eal.h > SYMLINK-FILE include/rte_errno.h > SYMLINK-FILE include/rte_launch.h > SYMLINK-FILE include/rte_lcore.h > SYMLINK-FILE include/rte_log.h > SYMLINK-FILE include/rte_memcpy.h > SYMLINK-FILE include/rte_memory.h > SYMLINK-FILE include/rte_memzone.h > SYMLINK-FILE include/rte_pci.h > SYMLINK-FILE include/rte_pci_dev_ids.h > SYMLINK-FILE include/rte_per_lcore.h > SYMLINK-FILE include/rte_prefetch.h > SYMLINK-FILE include/rte_random.h > SYMLINK-FILE include/rte_rwlock.h > SYMLINK-FILE include/rte_spinlock.h > SYMLINK-FILE include/rte_tailq.h > SYMLINK-FILE include/rte_interrupts.h > SYMLINK-FILE include/rte_alarm.h > SYMLINK-FILE include/rte_string_fns.h > SYMLINK-FILE include/rte_cpuflags.h > SYMLINK-FILE include/rte_version.h > SYMLINK-FILE include/rte_tailq_elem.h > SYMLINK-FILE include/rte_eal_memconfig.h > SYMLINK-FILE include/rte_malloc_heap.h > SYMLINK-FILE include/rte_hexdump.h > SYMLINK-FILE include/arch/rte_atomic.h > == Build lib/librte_eal/linuxapp > == Build lib/librte_eal/linuxapp/igb_uio > LD > > /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/built-in.o > CC [M] > > /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.o > Building modules, stage 2. > MODPOST 1 modules > CC > > /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.mod.o > LD [M] > > /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.ko > INSTALL-MODULE igb_uio.ko > == Build lib/librte_eal/linuxapp/eal > CC eal.o > gcc: error: –g: 그런 파일이나 디렉터리가 없습니다 > make[7]: *** [eal.o] 오류 1 > make[6]: *** [eal] 오류 2 > make[5]: *** [linuxapp] 오류 2 > make[4]: *** [librte_eal] 오류 2 > make[3]: *** [lib] 오류 2 > make[2]: *** [all] 오류 2 > make[1]: *** [x86_64-default-linuxapp-gcc_install] 오류 2 > make: *** [install] 오류 2 > > I'm sorry for the Korean characteristics. It was shown because My Fedora OS > is set to use Korean as a default language. > > I set two environmental variables following the > intel-dpdk-programmers-guide.pdf as below: > > export RTE_SDK=/home/stack/dpdk/DPDK-1.6.0 > export RTE_TARGET=x86_64-native-linuxapp-gcc > > What should I do in order to install DPDK successfully?... > > Thanks in advance. > > Best regards > > Byeong-Gi KIM > > > > > 2014-07-14 10:00 GMT+09:00 Choi, Sy Jong <sy.jong.choi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>: > > > Hi Mr. Kim, > > > > Please do not compile with "T=x86*gcc" because it will compile BSD app > > too, which cause the error. > > > > Please complile only the configuration you need. This should remove the > > error. > > > > > > Regards, > > Choi, Sy Jong > > > > > > -----Original Message----- > > *From: *BYEONG-GI KIM [kimbyeonggi-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org] > > *Sent: *Monday, July 14, 2014 08:25 AM Malay Peninsula Standard Time > > *To: *Dpdk-ovs-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org; dev-VfR2kkLFssw@public.gmane.org > > *Subject: *[dpdk-dev] Error while compiling DPDK > > > > Hello. > > > > An error occured while compiling DPDK 1.6.0r2 as below: > > > > [root@compute dpdk-1.6.0r2]# make install T=x86_64*gcc > > ...Installing... > > /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c: In function > > ‘rte_eal_init’: > > /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c:873:2: error: > > format ‘%p’ expects argument of type ‘void *’, but argument 5 has type > > ‘pthread_t’ [-Werror=format=] > > RTE_LOG(DEBUG, EAL, "Master core %u is ready (tid=%p)\n", > > ^ > > > > The current OS is Fedora20. What should I do?... > > > > Best regards > > > > Byeong-Gi KIM > > > ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <CAFLKUz+hiZ829tVbLUz14zM2=JjR1Dv8vK=iH4iq-Y2Rqk_ahg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: Error while compiling DPDK [not found] ` <CAFLKUz+hiZ829tVbLUz14zM2=JjR1Dv8vK=iH4iq-Y2Rqk_ahg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2014-07-14 2:04 ` BYEONG-GI KIM [not found] ` <CAEHt_JZY0YRJtouL-+jogCcyLazv1Rf41=0T_OOeKTP8imH2MQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 0 siblings, 1 reply; 11+ messages in thread From: BYEONG-GI KIM @ 2014-07-14 2:04 UTC (permalink / raw) To: Masaru Oki, dev-VfR2kkLFssw, Dpdk-ovs-hn68Rpc1hR1g9hUCZPvPmw Here is the error message in English; == Build lib/librte_eal/linuxapp == Build lib/librte_eal/linuxapp/igb_uio LD /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/built-in.o CC [M] /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.o Building modules, stage 2. MODPOST 1 modules CC /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.mod.o LD [M] /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.ko INSTALL-MODULE igb_uio.ko == Build lib/librte_eal/linuxapp/eal CC eal.o gcc: error: –g: No such file or directory make[7]: *** [eal.o] Error 1 make[6]: *** [eal] Error 2 make[5]: *** [linuxapp] Error 2 make[4]: *** [librte_eal] Error 2 make[3]: *** [lib] Error 2 make[2]: *** [all] Error 2 make[1]: *** [x86_64-default-linuxapp-gcc_install] Error 2 make: *** [install] Error 2 2014-07-14 11:02 GMT+09:00 Masaru Oki <m-oki-kJJssGRo5Gr08ZWpFnN8/c8NsWr+9BEh@public.gmane.org>: > > I'm sorry for the Korean characteristics. It was shown because My Fedora > OS > > is set to use Korean as a default language. > > Try env LANG=C make install ... > > > 2014-07-14 10:24 GMT+09:00 BYEONG-GI KIM <kimbyeonggi-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>: > >> Dear choi, >> >> Thank you for the reply. >> >> I've been trying to install DPDK while changing the command as you >> mentioned, i.e., I used T=x86_64-default-linuxapp-gcc, but error was still >> shown; >> >> >> [root@compute DPDK-1.6.0]# make install T=x86_64-default-linuxapp-gcc >> ================== Installing x86_64-default-linuxapp-gcc >> Configuration done >> == Build scripts >> == Build scripts/testhost >> HOSTCC testhost.o >> HOSTLD testhost >> INSTALL-HOSTAPP testhost >> == Build lib >> == Build lib/librte_eal >> == Build lib/librte_eal/common >> SYMLINK-FILE include/rte_atomic.h >> SYMLINK-FILE include/rte_branch_prediction.h >> SYMLINK-FILE include/rte_byteorder.h >> SYMLINK-FILE include/rte_common.h >> SYMLINK-FILE include/rte_cycles.h >> SYMLINK-FILE include/rte_debug.h >> SYMLINK-FILE include/rte_eal.h >> SYMLINK-FILE include/rte_errno.h >> SYMLINK-FILE include/rte_launch.h >> SYMLINK-FILE include/rte_lcore.h >> SYMLINK-FILE include/rte_log.h >> SYMLINK-FILE include/rte_memcpy.h >> SYMLINK-FILE include/rte_memory.h >> SYMLINK-FILE include/rte_memzone.h >> SYMLINK-FILE include/rte_pci.h >> SYMLINK-FILE include/rte_pci_dev_ids.h >> SYMLINK-FILE include/rte_per_lcore.h >> SYMLINK-FILE include/rte_prefetch.h >> SYMLINK-FILE include/rte_random.h >> SYMLINK-FILE include/rte_rwlock.h >> SYMLINK-FILE include/rte_spinlock.h >> SYMLINK-FILE include/rte_tailq.h >> SYMLINK-FILE include/rte_interrupts.h >> SYMLINK-FILE include/rte_alarm.h >> SYMLINK-FILE include/rte_string_fns.h >> SYMLINK-FILE include/rte_cpuflags.h >> SYMLINK-FILE include/rte_version.h >> SYMLINK-FILE include/rte_tailq_elem.h >> SYMLINK-FILE include/rte_eal_memconfig.h >> SYMLINK-FILE include/rte_malloc_heap.h >> SYMLINK-FILE include/rte_hexdump.h >> SYMLINK-FILE include/arch/rte_atomic.h >> == Build lib/librte_eal/linuxapp >> == Build lib/librte_eal/linuxapp/igb_uio >> LD >> >> /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/built-in.o >> CC [M] >> >> /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.o >> Building modules, stage 2. >> MODPOST 1 modules >> CC >> >> /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.mod.o >> LD [M] >> >> /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.ko >> INSTALL-MODULE igb_uio.ko >> == Build lib/librte_eal/linuxapp/eal >> CC eal.o >> gcc: error: –g: 그런 파일이나 디렉터리가 없습니다 >> make[7]: *** [eal.o] 오류 1 >> make[6]: *** [eal] 오류 2 >> make[5]: *** [linuxapp] 오류 2 >> make[4]: *** [librte_eal] 오류 2 >> make[3]: *** [lib] 오류 2 >> make[2]: *** [all] 오류 2 >> make[1]: *** [x86_64-default-linuxapp-gcc_install] 오류 2 >> make: *** [install] 오류 2 >> >> I'm sorry for the Korean characteristics. It was shown because My Fedora >> OS >> is set to use Korean as a default language. >> >> I set two environmental variables following the >> intel-dpdk-programmers-guide.pdf as below: >> >> export RTE_SDK=/home/stack/dpdk/DPDK-1.6.0 >> export RTE_TARGET=x86_64-native-linuxapp-gcc >> >> What should I do in order to install DPDK successfully?... >> >> Thanks in advance. >> >> Best regards >> >> Byeong-Gi KIM >> >> >> >> >> 2014-07-14 10:00 GMT+09:00 Choi, Sy Jong <sy.jong.choi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>: >> >> > Hi Mr. Kim, >> > >> > Please do not compile with "T=x86*gcc" because it will compile BSD app >> > too, which cause the error. >> > >> > Please complile only the configuration you need. This should remove the >> > error. >> > >> > >> > Regards, >> > Choi, Sy Jong >> > >> > >> > -----Original Message----- >> > *From: *BYEONG-GI KIM [kimbyeonggi-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org] >> > *Sent: *Monday, July 14, 2014 08:25 AM Malay Peninsula Standard Time >> > *To: *Dpdk-ovs-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org; dev-VfR2kkLFssw@public.gmane.org >> > *Subject: *[dpdk-dev] Error while compiling DPDK >> >> > >> > Hello. >> > >> > An error occured while compiling DPDK 1.6.0r2 as below: >> > >> > [root@compute dpdk-1.6.0r2]# make install T=x86_64*gcc >> > ...Installing... >> > /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c: In function >> > ‘rte_eal_init’: >> > /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c:873:2: error: >> > format ‘%p’ expects argument of type ‘void *’, but argument 5 has type >> > ‘pthread_t’ [-Werror=format=] >> > RTE_LOG(DEBUG, EAL, "Master core %u is ready (tid=%p)\n", >> > ^ >> > >> > The current OS is Fedora20. What should I do?... >> > >> > Best regards >> > >> > Byeong-Gi KIM >> > >> > > ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <CAEHt_JZY0YRJtouL-+jogCcyLazv1Rf41=0T_OOeKTP8imH2MQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: Error while compiling DPDK [not found] ` <CAEHt_JZY0YRJtouL-+jogCcyLazv1Rf41=0T_OOeKTP8imH2MQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2014-07-14 2:40 ` Choi, Sy Jong [not found] ` <697F8B1B48670548A5BAB03E8283550F2D300085-j2khPEwRog0LtBVenmexd7fspsVTdybXVpNB7YpNyf8@public.gmane.org> 0 siblings, 1 reply; 11+ messages in thread From: Choi, Sy Jong @ 2014-07-14 2:40 UTC (permalink / raw) To: 'BYEONG-GI KIM', 'Masaru Oki', 'dev-VfR2kkLFssw@public.gmane.org', 'Dpdk-ovs-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org' Hi Mr. Kim, May confirm which environment are you using? x86_64-default-linuxapp-gcc or x86_64-native-linuxapp-gcc Regards, Choi, Sy Jong -----Original Message----- From: BYEONG-GI KIM [kimbyeonggi@gmail.com<mailto:kimbyeonggi@gmail.com>] Sent: Monday, July 14, 2014 10:05 AM Malay Peninsula Standard Time To: Masaru Oki; dev@dpdk.org; Dpdk-ovs@lists.01.org Subject: Re: [dpdk-dev] Error while compiling DPDK Here is the error message in English; == Build lib/librte_eal/linuxapp == Build lib/librte_eal/linuxapp/igb_uio LD /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/built-in.o CC [M] /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.o Building modules, stage 2. MODPOST 1 modules CC /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.mod.o LD [M] /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.ko INSTALL-MODULE igb_uio.ko == Build lib/librte_eal/linuxapp/eal CC eal.o gcc: error: –g: No such file or directory make[7]: *** [eal.o] Error 1 make[6]: *** [eal] Error 2 make[5]: *** [linuxapp] Error 2 make[4]: *** [librte_eal] Error 2 make[3]: *** [lib] Error 2 make[2]: *** [all] Error 2 make[1]: *** [x86_64-default-linuxapp-gcc_install] Error 2 make: *** [install] Error 2 2014-07-14 11:02 GMT+09:00 Masaru Oki <m-oki@stratosphere.co.jp>: > > I'm sorry for the Korean characteristics. It was shown because My Fedora > OS > > is set to use Korean as a default language. > > Try env LANG=C make install ... > > > 2014-07-14 10:24 GMT+09:00 BYEONG-GI KIM <kimbyeonggi@gmail.com>: > >> Dear choi, >> >> Thank you for the reply. >> >> I've been trying to install DPDK while changing the command as you >> mentioned, i.e., I used T=x86_64-default-linuxapp-gcc, but error was still >> shown; >> >> >> [root@compute DPDK-1.6.0]# make install T=x86_64-default-linuxapp-gcc >> ================== Installing x86_64-default-linuxapp-gcc >> Configuration done >> == Build scripts >> == Build scripts/testhost >> HOSTCC testhost.o >> HOSTLD testhost >> INSTALL-HOSTAPP testhost >> == Build lib >> == Build lib/librte_eal >> == Build lib/librte_eal/common >> SYMLINK-FILE include/rte_atomic.h >> SYMLINK-FILE include/rte_branch_prediction.h >> SYMLINK-FILE include/rte_byteorder.h >> SYMLINK-FILE include/rte_common.h >> SYMLINK-FILE include/rte_cycles.h >> SYMLINK-FILE include/rte_debug.h >> SYMLINK-FILE include/rte_eal.h >> SYMLINK-FILE include/rte_errno.h >> SYMLINK-FILE include/rte_launch.h >> SYMLINK-FILE include/rte_lcore.h >> SYMLINK-FILE include/rte_log.h >> SYMLINK-FILE include/rte_memcpy.h >> SYMLINK-FILE include/rte_memory.h >> SYMLINK-FILE include/rte_memzone.h >> SYMLINK-FILE include/rte_pci.h >> SYMLINK-FILE include/rte_pci_dev_ids.h >> SYMLINK-FILE include/rte_per_lcore.h >> SYMLINK-FILE include/rte_prefetch.h >> SYMLINK-FILE include/rte_random.h >> SYMLINK-FILE include/rte_rwlock.h >> SYMLINK-FILE include/rte_spinlock.h >> SYMLINK-FILE include/rte_tailq.h >> SYMLINK-FILE include/rte_interrupts.h >> SYMLINK-FILE include/rte_alarm.h >> SYMLINK-FILE include/rte_string_fns.h >> SYMLINK-FILE include/rte_cpuflags.h >> SYMLINK-FILE include/rte_version.h >> SYMLINK-FILE include/rte_tailq_elem.h >> SYMLINK-FILE include/rte_eal_memconfig.h >> SYMLINK-FILE include/rte_malloc_heap.h >> SYMLINK-FILE include/rte_hexdump.h >> SYMLINK-FILE include/arch/rte_atomic.h >> == Build lib/librte_eal/linuxapp >> == Build lib/librte_eal/linuxapp/igb_uio >> LD >> >> /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/built-in.o >> CC [M] >> >> /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.o >> Building modules, stage 2. >> MODPOST 1 modules >> CC >> >> /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.mod.o >> LD [M] >> >> /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.ko >> INSTALL-MODULE igb_uio.ko >> == Build lib/librte_eal/linuxapp/eal >> CC eal.o >> gcc: error: –g: 그런 파일이나 디렉터리가 없습니다 >> make[7]: *** [eal.o] 오류 1 >> make[6]: *** [eal] 오류 2 >> make[5]: *** [linuxapp] 오류 2 >> make[4]: *** [librte_eal] 오류 2 >> make[3]: *** [lib] 오류 2 >> make[2]: *** [all] 오류 2 >> make[1]: *** [x86_64-default-linuxapp-gcc_install] 오류 2 >> make: *** [install] 오류 2 >> >> I'm sorry for the Korean characteristics. It was shown because My Fedora >> OS >> is set to use Korean as a default language. >> >> I set two environmental variables following the >> intel-dpdk-programmers-guide.pdf as below: >> >> export RTE_SDK=/home/stack/dpdk/DPDK-1.6.0 >> export RTE_TARGET=x86_64-native-linuxapp-gcc >> >> What should I do in order to install DPDK successfully?... >> >> Thanks in advance. >> >> Best regards >> >> Byeong-Gi KIM >> >> >> >> >> 2014-07-14 10:00 GMT+09:00 Choi, Sy Jong <sy.jong.choi@intel.com>: >> >> > Hi Mr. Kim, >> > >> > Please do not compile with "T=x86*gcc" because it will compile BSD app >> > too, which cause the error. >> > >> > Please complile only the configuration you need. This should remove the >> > error. >> > >> > >> > Regards, >> > Choi, Sy Jong >> > >> > >> > -----Original Message----- >> > *From: *BYEONG-GI KIM [kimbyeonggi@gmail.com] >> > *Sent: *Monday, July 14, 2014 08:25 AM Malay Peninsula Standard Time >> > *To: *Dpdk-ovs@lists.01.org; dev@dpdk.org >> > *Subject: *[dpdk-dev] Error while compiling DPDK >> >> > >> > Hello. >> > >> > An error occured while compiling DPDK 1.6.0r2 as below: >> > >> > [root@compute dpdk-1.6.0r2]# make install T=x86_64*gcc >> > ...Installing... >> > /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c: In function >> > ‘rte_eal_init’: >> > /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c:873:2: error: >> > format ‘%p’ expects argument of type ‘void *’, but argument 5 has type >> > ‘pthread_t’ [-Werror=format=] >> > RTE_LOG(DEBUG, EAL, "Master core %u is ready (tid=%p)\n", >> > ^ >> > >> > The current OS is Fedora20. What should I do?... >> > >> > Best regards >> > >> > Byeong-Gi KIM >> > >> > > ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <697F8B1B48670548A5BAB03E8283550F2D300085-j2khPEwRog0LtBVenmexd7fspsVTdybXVpNB7YpNyf8@public.gmane.org>]
* Re: Error while compiling DPDK [not found] ` <697F8B1B48670548A5BAB03E8283550F2D300085-j2khPEwRog0LtBVenmexd7fspsVTdybXVpNB7YpNyf8@public.gmane.org> @ 2014-07-14 3:28 ` BYEONG-GI KIM [not found] ` <CAEHt_JbGRk3PahkkoYtBLNdpN+GUrJUp=85HQOLze=jFg5kMPw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 0 siblings, 1 reply; 11+ messages in thread From: BYEONG-GI KIM @ 2014-07-14 3:28 UTC (permalink / raw) To: Choi, Sy Jong, dev-VfR2kkLFssw, Dpdk-ovs-hn68Rpc1hR1g9hUCZPvPmw Dear Choi I used x86_64-default-linuxapp-gcc. I also checked x86_64-native-linuxapp-gcc after exporting RTE_TARGET=x86_64-native-linuxapp-gcc, but there was a message "make[1]: Nothing to be done for `install'." while trying to install it. Best regards Byeong-Gi KIM 2014-07-14 11:40 GMT+09:00 Choi, Sy Jong <sy.jong.choi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>: > Hi Mr. Kim, > > May confirm which environment are you using? > x86_64-default-linuxapp-gcc or > x86_64-native-linuxapp-gcc > > > > > Regards, > Choi, Sy Jong > > -----Original Message----- > *From: *BYEONG-GI KIM [kimbyeonggi-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org] > *Sent: *Monday, July 14, 2014 10:05 AM Malay Peninsula Standard Time > *To: *Masaru Oki; dev-VfR2kkLFssw@public.gmane.org; Dpdk-ovs-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org > *Subject: *Re: [dpdk-dev] Error while compiling DPDK > > Here is the error message in English; > > == Build lib/librte_eal/linuxapp > == Build lib/librte_eal/linuxapp/igb_uio > LD > > /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/built-in.o > CC [M] > > /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.o > Building modules, stage 2. > MODPOST 1 modules > CC > > /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.mod.o > LD [M] > > /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.ko > INSTALL-MODULE igb_uio.ko > == Build lib/librte_eal/linuxapp/eal > CC eal.o > gcc: error: –g: No such file or directory > make[7]: *** [eal.o] Error 1 > make[6]: *** [eal] Error 2 > make[5]: *** [linuxapp] Error 2 > make[4]: *** [librte_eal] Error 2 > make[3]: *** [lib] Error 2 > make[2]: *** [all] Error 2 > make[1]: *** [x86_64-default-linuxapp-gcc_install] Error 2 > make: *** [install] Error 2 > > > > 2014-07-14 11:02 GMT+09:00 Masaru Oki <m-oki-kJJssGRo5Gr08ZWpFnN8/c8NsWr+9BEh@public.gmane.org>: > > > > I'm sorry for the Korean characteristics. It was shown because My > Fedora > > OS > > > is set to use Korean as a default language. > > > > Try env LANG=C make install ... > > > > > > 2014-07-14 10:24 GMT+09:00 BYEONG-GI KIM <kimbyeonggi-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>: > > > >> Dear choi, > >> > >> Thank you for the reply. > >> > >> I've been trying to install DPDK while changing the command as you > >> mentioned, i.e., I used T=x86_64-default-linuxapp-gcc, but error was > still > >> shown; > >> > >> > >> [root@compute DPDK-1.6.0]# make install T=x86_64-default-linuxapp-gcc > >> ================== Installing x86_64-default-linuxapp-gcc > >> Configuration done > >> == Build scripts > >> == Build scripts/testhost > >> HOSTCC testhost.o > >> HOSTLD testhost > >> INSTALL-HOSTAPP testhost > >> == Build lib > >> == Build lib/librte_eal > >> == Build lib/librte_eal/common > >> SYMLINK-FILE include/rte_atomic.h > >> SYMLINK-FILE include/rte_branch_prediction.h > >> SYMLINK-FILE include/rte_byteorder.h > >> SYMLINK-FILE include/rte_common.h > >> SYMLINK-FILE include/rte_cycles.h > >> SYMLINK-FILE include/rte_debug.h > >> SYMLINK-FILE include/rte_eal.h > >> SYMLINK-FILE include/rte_errno.h > >> SYMLINK-FILE include/rte_launch.h > >> SYMLINK-FILE include/rte_lcore.h > >> SYMLINK-FILE include/rte_log.h > >> SYMLINK-FILE include/rte_memcpy.h > >> SYMLINK-FILE include/rte_memory.h > >> SYMLINK-FILE include/rte_memzone.h > >> SYMLINK-FILE include/rte_pci.h > >> SYMLINK-FILE include/rte_pci_dev_ids.h > >> SYMLINK-FILE include/rte_per_lcore.h > >> SYMLINK-FILE include/rte_prefetch.h > >> SYMLINK-FILE include/rte_random.h > >> SYMLINK-FILE include/rte_rwlock.h > >> SYMLINK-FILE include/rte_spinlock.h > >> SYMLINK-FILE include/rte_tailq.h > >> SYMLINK-FILE include/rte_interrupts.h > >> SYMLINK-FILE include/rte_alarm.h > >> SYMLINK-FILE include/rte_string_fns.h > >> SYMLINK-FILE include/rte_cpuflags.h > >> SYMLINK-FILE include/rte_version.h > >> SYMLINK-FILE include/rte_tailq_elem.h > >> SYMLINK-FILE include/rte_eal_memconfig.h > >> SYMLINK-FILE include/rte_malloc_heap.h > >> SYMLINK-FILE include/rte_hexdump.h > >> SYMLINK-FILE include/arch/rte_atomic.h > >> == Build lib/librte_eal/linuxapp > >> == Build lib/librte_eal/linuxapp/igb_uio > >> LD > >> > >> > /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/built-in.o > >> CC [M] > >> > >> > /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.o > >> Building modules, stage 2. > >> MODPOST 1 modules > >> CC > >> > >> > /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.mod.o > >> LD [M] > >> > >> > /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.ko > >> INSTALL-MODULE igb_uio.ko > >> == Build lib/librte_eal/linuxapp/eal > >> CC eal.o > >> gcc: error: –g: 그런 파일이나 디렉터리가 없습니다 > >> make[7]: *** [eal.o] 오류 1 > >> make[6]: *** [eal] 오류 2 > >> make[5]: *** [linuxapp] 오류 2 > >> make[4]: *** [librte_eal] 오류 2 > >> make[3]: *** [lib] 오류 2 > >> make[2]: *** [all] 오류 2 > >> make[1]: *** [x86_64-default-linuxapp-gcc_install] 오류 2 > >> make: *** [install] 오류 2 > >> > >> I'm sorry for the Korean characteristics. It was shown because My Fedora > >> OS > >> is set to use Korean as a default language. > >> > >> I set two environmental variables following the > >> intel-dpdk-programmers-guide.pdf as below: > >> > >> export RTE_SDK=/home/stack/dpdk/DPDK-1.6.0 > >> export RTE_TARGET=x86_64-native-linuxapp-gcc > >> > >> What should I do in order to install DPDK successfully?... > >> > >> Thanks in advance. > >> > >> Best regards > >> > >> Byeong-Gi KIM > >> > >> > >> > >> > >> 2014-07-14 10:00 GMT+09:00 Choi, Sy Jong <sy.jong.choi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>: > >> > >> > Hi Mr. Kim, > >> > > >> > Please do not compile with "T=x86*gcc" because it will compile BSD app > >> > too, which cause the error. > >> > > >> > Please complile only the configuration you need. This should remove > the > >> > error. > >> > > >> > > >> > Regards, > >> > Choi, Sy Jong > >> > > >> > > >> > -----Original Message----- > >> > *From: *BYEONG-GI KIM [kimbyeonggi-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org] > >> > *Sent: *Monday, July 14, 2014 08:25 AM Malay Peninsula Standard Time > >> > *To: *Dpdk-ovs-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org; dev-VfR2kkLFssw@public.gmane.org > >> > *Subject: *[dpdk-dev] Error while compiling DPDK > >> > >> > > >> > Hello. > >> > > >> > An error occured while compiling DPDK 1.6.0r2 as below: > >> > > >> > [root@compute dpdk-1.6.0r2]# make install T=x86_64*gcc > >> > ...Installing... > >> > /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c: In function > >> > ‘rte_eal_init’: > >> > /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c:873:2: error: > >> > format ‘%p’ expects argument of type ‘void *’, but argument 5 has type > >> > ‘pthread_t’ [-Werror=format=] > >> > RTE_LOG(DEBUG, EAL, "Master core %u is ready (tid=%p)\n", > >> > ^ > >> > > >> > The current OS is Fedora20. What should I do?... > >> > > >> > Best regards > >> > > >> > Byeong-Gi KIM > >> > > >> > > > > > ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <CAEHt_JbGRk3PahkkoYtBLNdpN+GUrJUp=85HQOLze=jFg5kMPw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: Error while compiling DPDK [not found] ` <CAEHt_JbGRk3PahkkoYtBLNdpN+GUrJUp=85HQOLze=jFg5kMPw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2014-07-14 4:32 ` Choi, Sy Jong [not found] ` <697F8B1B48670548A5BAB03E8283550F2D3000F3-j2khPEwRog0LtBVenmexd7fspsVTdybXVpNB7YpNyf8@public.gmane.org> 0 siblings, 1 reply; 11+ messages in thread From: Choi, Sy Jong @ 2014-07-14 4:32 UTC (permalink / raw) To: BYEONG-GI KIM, dev-VfR2kkLFssw@public.gmane.org, Dpdk-ovs-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org Hi Mr. Kim, If you are compiling x86_64-default-linuxapp-gcc The RTE_TARGET=x86_64-default-linuxapp-gcc I have manage to compile DPDK r1.6.0 with the following OS and kernel version CentOS with customer kernel Linux localhost.localdomain 3.3.1 #1 SMP Tue Jan 7 22:44:17 MYT 2014 x86_64 x86_64 x86_64 GNU/Linux Ubuntu 14.04 Linux choi-desktop 3.13.0-30-generic #55-Ubuntu SMP Fri Jul 4 21:40:53 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux May I know, have you been able to compile DPDK previously? Regards, Choi, Sy Jong Platform Application Engineer From: BYEONG-GI KIM [mailto:kimbyeonggi@gmail.com] Sent: Monday, July 14, 2014 11:29 AM To: Choi, Sy Jong; dev@dpdk.org; Dpdk-ovs@lists.01.org Subject: Re: [dpdk-dev] Error while compiling DPDK Dear Choi I used x86_64-default-linuxapp-gcc. I also checked x86_64-native-linuxapp-gcc after exporting RTE_TARGET=x86_64-native-linuxapp-gcc, but there was a message "make[1]: Nothing to be done for `install'." while trying to install it. Best regards Byeong-Gi KIM 2014-07-14 11:40 GMT+09:00 Choi, Sy Jong <sy.jong.choi@intel.com<mailto:sy.jong.choi@intel.com>>: Hi Mr. Kim, May confirm which environment are you using? x86_64-default-linuxapp-gcc or x86_64-native-linuxapp-gcc Regards, Choi, Sy Jong -----Original Message----- From: BYEONG-GI KIM [kimbyeonggi@gmail.com<mailto:kimbyeonggi@gmail.com>] Sent: Monday, July 14, 2014 10:05 AM Malay Peninsula Standard Time To: Masaru Oki; dev@dpdk.org<mailto:dev@dpdk.org>; Dpdk-ovs@lists.01.org<mailto:Dpdk-ovs@lists.01.org> Subject: Re: [dpdk-dev] Error while compiling DPDK Here is the error message in English; == Build lib/librte_eal/linuxapp == Build lib/librte_eal/linuxapp/igb_uio LD /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/built-in.o CC [M] /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.o Building modules, stage 2. MODPOST 1 modules CC /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.mod.o LD [M] /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.ko INSTALL-MODULE igb_uio.ko == Build lib/librte_eal/linuxapp/eal CC eal.o gcc: error: –g: No such file or directory make[7]: *** [eal.o] Error 1 make[6]: *** [eal] Error 2 make[5]: *** [linuxapp] Error 2 make[4]: *** [librte_eal] Error 2 make[3]: *** [lib] Error 2 make[2]: *** [all] Error 2 make[1]: *** [x86_64-default-linuxapp-gcc_install] Error 2 make: *** [install] Error 2 2014-07-14 11:02 GMT+09:00 Masaru Oki <m-oki@stratosphere.co.jp<mailto:m-oki@stratosphere.co.jp>>: > > I'm sorry for the Korean characteristics. It was shown because My Fedora > OS > > is set to use Korean as a default language. > > Try env LANG=C make install ... > > > 2014-07-14 10:24 GMT+09:00 BYEONG-GI KIM <kimbyeonggi@gmail.com<mailto:kimbyeonggi@gmail.com>>: > >> Dear choi, >> >> Thank you for the reply. >> >> I've been trying to install DPDK while changing the command as you >> mentioned, i.e., I used T=x86_64-default-linuxapp-gcc, but error was still >> shown; >> >> >> [root@compute DPDK-1.6.0]# make install T=x86_64-default-linuxapp-gcc >> ================== Installing x86_64-default-linuxapp-gcc >> Configuration done >> == Build scripts >> == Build scripts/testhost >> HOSTCC testhost.o >> HOSTLD testhost >> INSTALL-HOSTAPP testhost >> == Build lib >> == Build lib/librte_eal >> == Build lib/librte_eal/common >> SYMLINK-FILE include/rte_atomic.h >> SYMLINK-FILE include/rte_branch_prediction.h >> SYMLINK-FILE include/rte_byteorder.h >> SYMLINK-FILE include/rte_common.h >> SYMLINK-FILE include/rte_cycles.h >> SYMLINK-FILE include/rte_debug.h >> SYMLINK-FILE include/rte_eal.h >> SYMLINK-FILE include/rte_errno.h >> SYMLINK-FILE include/rte_launch.h >> SYMLINK-FILE include/rte_lcore.h >> SYMLINK-FILE include/rte_log.h >> SYMLINK-FILE include/rte_memcpy.h >> SYMLINK-FILE include/rte_memory.h >> SYMLINK-FILE include/rte_memzone.h >> SYMLINK-FILE include/rte_pci.h >> SYMLINK-FILE include/rte_pci_dev_ids.h >> SYMLINK-FILE include/rte_per_lcore.h >> SYMLINK-FILE include/rte_prefetch.h >> SYMLINK-FILE include/rte_random.h >> SYMLINK-FILE include/rte_rwlock.h >> SYMLINK-FILE include/rte_spinlock.h >> SYMLINK-FILE include/rte_tailq.h >> SYMLINK-FILE include/rte_interrupts.h >> SYMLINK-FILE include/rte_alarm.h >> SYMLINK-FILE include/rte_string_fns.h >> SYMLINK-FILE include/rte_cpuflags.h >> SYMLINK-FILE include/rte_version.h >> SYMLINK-FILE include/rte_tailq_elem.h >> SYMLINK-FILE include/rte_eal_memconfig.h >> SYMLINK-FILE include/rte_malloc_heap.h >> SYMLINK-FILE include/rte_hexdump.h >> SYMLINK-FILE include/arch/rte_atomic.h >> == Build lib/librte_eal/linuxapp >> == Build lib/librte_eal/linuxapp/igb_uio >> LD >> >> /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/built-in.o >> CC [M] >> >> /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.o >> Building modules, stage 2. >> MODPOST 1 modules >> CC >> >> /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.mod.o >> LD [M] >> >> /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.ko >> INSTALL-MODULE igb_uio.ko >> == Build lib/librte_eal/linuxapp/eal >> CC eal.o >> gcc: error: –g: 그런 파일이나 디렉터리가 없습니다 >> make[7]: *** [eal.o] 오류 1 >> make[6]: *** [eal] 오류 2 >> make[5]: *** [linuxapp] 오류 2 >> make[4]: *** [librte_eal] 오류 2 >> make[3]: *** [lib] 오류 2 >> make[2]: *** [all] 오류 2 >> make[1]: *** [x86_64-default-linuxapp-gcc_install] 오류 2 >> make: *** [install] 오류 2 >> >> I'm sorry for the Korean characteristics. It was shown because My Fedora >> OS >> is set to use Korean as a default language. >> >> I set two environmental variables following the >> intel-dpdk-programmers-guide.pdf as below: >> >> export RTE_SDK=/home/stack/dpdk/DPDK-1.6.0 >> export RTE_TARGET=x86_64-native-linuxapp-gcc >> >> What should I do in order to install DPDK successfully?... >> >> Thanks in advance. >> >> Best regards >> >> Byeong-Gi KIM >> >> >> >> >> 2014-07-14 10:00 GMT+09:00 Choi, Sy Jong <sy.jong.choi@intel.com<mailto:sy.jong.choi@intel.com>>: >> >> > Hi Mr. Kim, >> > >> > Please do not compile with "T=x86*gcc" because it will compile BSD app >> > too, which cause the error. >> > >> > Please complile only the configuration you need. This should remove the >> > error. >> > >> > >> > Regards, >> > Choi, Sy Jong >> > >> > >> > -----Original Message----- >> > *From: *BYEONG-GI KIM [kimbyeonggi@gmail.com<mailto:kimbyeonggi@gmail.com>] >> > *Sent: *Monday, July 14, 2014 08:25 AM Malay Peninsula Standard Time >> > *To: *Dpdk-ovs@lists.01.org<mailto:Dpdk-ovs@lists.01.org>; dev@dpdk.org<mailto:dev@dpdk.org> >> > *Subject: *[dpdk-dev] Error while compiling DPDK >> >> > >> > Hello. >> > >> > An error occured while compiling DPDK 1.6.0r2 as below: >> > >> > [root@compute dpdk-1.6.0r2]# make install T=x86_64*gcc >> > ...Installing... >> > /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c: In function >> > ‘rte_eal_init’: >> > /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c:873:2: error: >> > format ‘%p’ expects argument of type ‘void *’, but argument 5 has type >> > ‘pthread_t’ [-Werror=format=] >> > RTE_LOG(DEBUG, EAL, "Master core %u is ready (tid=%p)\n", >> > ^ >> > >> > The current OS is Fedora20. What should I do?... >> > >> > Best regards >> > >> > Byeong-Gi KIM >> > >> > > ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <697F8B1B48670548A5BAB03E8283550F2D3000F3-j2khPEwRog0LtBVenmexd7fspsVTdybXVpNB7YpNyf8@public.gmane.org>]
* Re: Error while compiling DPDK [not found] ` <697F8B1B48670548A5BAB03E8283550F2D3000F3-j2khPEwRog0LtBVenmexd7fspsVTdybXVpNB7YpNyf8@public.gmane.org> @ 2014-07-14 4:43 ` BYEONG-GI KIM [not found] ` <CAEHt_JahewNF2DUfNkbb+3j8==-dG-sDCMJsr4BHi1t3+69BgQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 0 siblings, 1 reply; 11+ messages in thread From: BYEONG-GI KIM @ 2014-07-14 4:43 UTC (permalink / raw) To: Choi, Sy Jong, Dpdk-ovs-hn68Rpc1hR1g9hUCZPvPmw, dev-VfR2kkLFssw Dear Choi, Of course I used "export RTE_TARGET=x86_64-default-linuxapp-gcc" when I was trying to compile it. By the way, the compilation went off to one more step, there was another error message though; == Build lib/librte_eal/linuxapp/kni LD /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/built-in.o CC [M] /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/ixgbe_main.o /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/ixgbe_main.c: In function 'ixgbe_del_mac_filter': /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/ixgbe_main.c:525:3: error: implicit declaration of function 'compare_ether_addr' [-Werror=implicit-function-declaration] if (!compare_ether_addr(addr, adapter->mac_table[i].addr) && ^ cc1: all warnings being treated as errors make[10]: *** [/home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/ixgbe_main.o] Error 1 make[9]: *** [_module_/home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni] Error 2 make[8]: *** [sub-make] Error 2 make[7]: *** [rte_kni.ko] Error 2 make[6]: *** [kni] Error 2 make[5]: *** [linuxapp] Error 2 make[4]: *** [librte_eal] Error 2 make[3]: *** [lib] Error 2 make[2]: *** [all] Error 2 make[1]: *** [x86_64-default-linuxapp-gcc_install] Error 2 make: *** [install] Error 2 Honestly, I've never been able to compile DPDK successfully... I had been trying to compile it on CentOS 6.5, and was failed. Then I changed OS from CentOS to Fedora, but there are still lots of errors. Best regards Byeong-Gi KIM 2014-07-14 13:32 GMT+09:00 Choi, Sy Jong <sy.jong.choi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>: > Hi Mr. Kim, > > > > If you are compiling x86_64-default-linuxapp-gcc > > The RTE_TARGET=x86_64-default-linuxapp-gcc > > > > I have manage to compile DPDK r1.6.0 with the following OS and kernel > version > > CentOS with customer kernel > > Linux localhost.localdomain 3.3.1 #1 SMP Tue Jan 7 22:44:17 MYT 2014 > x86_64 x86_64 x86_64 GNU/Linux > > > > Ubuntu 14.04 > > Linux choi-desktop 3.13.0-30-generic #55-Ubuntu SMP Fri Jul 4 21:40:53 UTC > 2014 x86_64 x86_64 x86_64 GNU/Linux > > > > May I know, have you been able to compile DPDK previously? > > > > Regards, > > Choi, Sy Jong > > Platform Application Engineer > > > > *From:* BYEONG-GI KIM [mailto:kimbyeonggi-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org] > *Sent:* Monday, July 14, 2014 11:29 AM > *To:* Choi, Sy Jong; dev-VfR2kkLFssw@public.gmane.org; Dpdk-ovs-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org > > *Subject:* Re: [dpdk-dev] Error while compiling DPDK > > > > Dear Choi > > > > I used x86_64-default-linuxapp-gcc. > > > > I also checked x86_64-native-linuxapp-gcc after exporting > RTE_TARGET=x86_64-native-linuxapp-gcc, but there was a message "make[1]: > Nothing to be done for `install'." while trying to install it. > > > > Best regards > > > > Byeong-Gi KIM > > > > 2014-07-14 11:40 GMT+09:00 Choi, Sy Jong <sy.jong.choi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>: > > Hi Mr. Kim, > > May confirm which environment are you using? > x86_64-default-linuxapp-gcc or > x86_64-native-linuxapp-gcc > > > > > > Regards, > Choi, Sy Jong > > -----Original Message----- > > *From: *BYEONG-GI KIM [kimbyeonggi-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org] > *Sent: *Monday, July 14, 2014 10:05 AM Malay Peninsula Standard Time > *To: *Masaru Oki; dev-VfR2kkLFssw@public.gmane.org; Dpdk-ovs-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org > *Subject: *Re: [dpdk-dev] Error while compiling DPDK > > Here is the error message in English; > > == Build lib/librte_eal/linuxapp > == Build lib/librte_eal/linuxapp/igb_uio > LD > > /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/built-in.o > CC [M] > > /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.o > Building modules, stage 2. > MODPOST 1 modules > CC > > /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.mod.o > LD [M] > > /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.ko > INSTALL-MODULE igb_uio.ko > == Build lib/librte_eal/linuxapp/eal > CC eal.o > gcc: error: –g: No such file or directory > make[7]: *** [eal.o] Error 1 > make[6]: *** [eal] Error 2 > make[5]: *** [linuxapp] Error 2 > make[4]: *** [librte_eal] Error 2 > make[3]: *** [lib] Error 2 > make[2]: *** [all] Error 2 > make[1]: *** [x86_64-default-linuxapp-gcc_install] Error 2 > make: *** [install] Error 2 > > > > 2014-07-14 11:02 GMT+09:00 Masaru Oki <m-oki-kJJssGRo5Gr08ZWpFnN8/c8NsWr+9BEh@public.gmane.org>: > > > > I'm sorry for the Korean characteristics. It was shown because My > Fedora > > OS > > > is set to use Korean as a default language. > > > > Try env LANG=C make install ... > > > > > > 2014-07-14 10:24 GMT+09:00 BYEONG-GI KIM <kimbyeonggi-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>: > > > >> Dear choi, > >> > >> Thank you for the reply. > >> > >> I've been trying to install DPDK while changing the command as you > >> mentioned, i.e., I used T=x86_64-default-linuxapp-gcc, but error was > still > >> shown; > >> > >> > >> [root@compute DPDK-1.6.0]# make install T=x86_64-default-linuxapp-gcc > >> ================== Installing x86_64-default-linuxapp-gcc > >> Configuration done > >> == Build scripts > >> == Build scripts/testhost > >> HOSTCC testhost.o > >> HOSTLD testhost > >> INSTALL-HOSTAPP testhost > >> == Build lib > >> == Build lib/librte_eal > >> == Build lib/librte_eal/common > >> SYMLINK-FILE include/rte_atomic.h > >> SYMLINK-FILE include/rte_branch_prediction.h > >> SYMLINK-FILE include/rte_byteorder.h > >> SYMLINK-FILE include/rte_common.h > >> SYMLINK-FILE include/rte_cycles.h > >> SYMLINK-FILE include/rte_debug.h > >> SYMLINK-FILE include/rte_eal.h > >> SYMLINK-FILE include/rte_errno.h > >> SYMLINK-FILE include/rte_launch.h > >> SYMLINK-FILE include/rte_lcore.h > >> SYMLINK-FILE include/rte_log.h > >> SYMLINK-FILE include/rte_memcpy.h > >> SYMLINK-FILE include/rte_memory.h > >> SYMLINK-FILE include/rte_memzone.h > >> SYMLINK-FILE include/rte_pci.h > >> SYMLINK-FILE include/rte_pci_dev_ids.h > >> SYMLINK-FILE include/rte_per_lcore.h > >> SYMLINK-FILE include/rte_prefetch.h > >> SYMLINK-FILE include/rte_random.h > >> SYMLINK-FILE include/rte_rwlock.h > >> SYMLINK-FILE include/rte_spinlock.h > >> SYMLINK-FILE include/rte_tailq.h > >> SYMLINK-FILE include/rte_interrupts.h > >> SYMLINK-FILE include/rte_alarm.h > >> SYMLINK-FILE include/rte_string_fns.h > >> SYMLINK-FILE include/rte_cpuflags.h > >> SYMLINK-FILE include/rte_version.h > >> SYMLINK-FILE include/rte_tailq_elem.h > >> SYMLINK-FILE include/rte_eal_memconfig.h > >> SYMLINK-FILE include/rte_malloc_heap.h > >> SYMLINK-FILE include/rte_hexdump.h > >> SYMLINK-FILE include/arch/rte_atomic.h > >> == Build lib/librte_eal/linuxapp > >> == Build lib/librte_eal/linuxapp/igb_uio > >> LD > >> > >> > /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/built-in.o > >> CC [M] > >> > >> > /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.o > >> Building modules, stage 2. > >> MODPOST 1 modules > >> CC > >> > >> > /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.mod.o > >> LD [M] > >> > >> > /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.ko > >> INSTALL-MODULE igb_uio.ko > >> == Build lib/librte_eal/linuxapp/eal > >> CC eal.o > >> gcc: error: –g: 그런 파일이나 디렉터리가 없습니다 > >> make[7]: *** [eal.o] 오류 1 > >> make[6]: *** [eal] 오류 2 > >> make[5]: *** [linuxapp] 오류 2 > >> make[4]: *** [librte_eal] 오류 2 > >> make[3]: *** [lib] 오류 2 > >> make[2]: *** [all] 오류 2 > >> make[1]: *** [x86_64-default-linuxapp-gcc_install] 오류 2 > >> make: *** [install] 오류 2 > >> > >> I'm sorry for the Korean characteristics. It was shown because My Fedora > >> OS > >> is set to use Korean as a default language. > >> > >> I set two environmental variables following the > >> intel-dpdk-programmers-guide.pdf as below: > >> > >> export RTE_SDK=/home/stack/dpdk/DPDK-1.6.0 > >> export RTE_TARGET=x86_64-native-linuxapp-gcc > >> > >> What should I do in order to install DPDK successfully?... > >> > >> Thanks in advance. > >> > >> Best regards > >> > >> Byeong-Gi KIM > >> > >> > >> > >> > >> 2014-07-14 10:00 GMT+09:00 Choi, Sy Jong <sy.jong.choi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>: > >> > >> > Hi Mr. Kim, > >> > > >> > Please do not compile with "T=x86*gcc" because it will compile BSD app > >> > too, which cause the error. > >> > > >> > Please complile only the configuration you need. This should remove > the > >> > error. > >> > > >> > > >> > Regards, > >> > Choi, Sy Jong > >> > > >> > > >> > -----Original Message----- > >> > *From: *BYEONG-GI KIM [kimbyeonggi-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org] > >> > *Sent: *Monday, July 14, 2014 08:25 AM Malay Peninsula Standard Time > >> > *To: *Dpdk-ovs-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org; dev-VfR2kkLFssw@public.gmane.org > >> > *Subject: *[dpdk-dev] Error while compiling DPDK > >> > >> > > >> > Hello. > >> > > >> > An error occured while compiling DPDK 1.6.0r2 as below: > >> > > >> > [root@compute dpdk-1.6.0r2]# make install T=x86_64*gcc > >> > ...Installing... > >> > /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c: In function > >> > ‘rte_eal_init’: > >> > /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c:873:2: error: > >> > format ‘%p’ expects argument of type ‘void *’, but argument 5 has type > >> > ‘pthread_t’ [-Werror=format=] > >> > RTE_LOG(DEBUG, EAL, "Master core %u is ready (tid=%p)\n", > >> > ^ > >> > > >> > The current OS is Fedora20. What should I do?... > >> > > >> > Best regards > >> > > >> > Byeong-Gi KIM > >> > > >> > > > > > > > ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <CAEHt_JahewNF2DUfNkbb+3j8==-dG-sDCMJsr4BHi1t3+69BgQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: Error while compiling DPDK [not found] ` <CAEHt_JahewNF2DUfNkbb+3j8==-dG-sDCMJsr4BHi1t3+69BgQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2014-07-14 8:27 ` De Lara Guarch, Pablo 0 siblings, 0 replies; 11+ messages in thread From: De Lara Guarch, Pablo @ 2014-07-14 8:27 UTC (permalink / raw) To: BYEONG-GI KIM, Choi, Sy Jong, Dpdk-ovs-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org, dev-VfR2kkLFssw@public.gmane.org Hi Byeong-gi, > -----Original Message----- > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of BYEONG-GI KIM > Sent: Monday, July 14, 2014 5:44 AM > To: Choi, Sy Jong; Dpdk-ovs@lists.01.org; dev@dpdk.org > Subject: Re: [dpdk-dev] Error while compiling DPDK > > Dear Choi, > > Of course I used "export RTE_TARGET=x86_64-default-linuxapp-gcc" when I was > trying to compile it. > > By the way, the compilation went off to one more step, there was another > error message though; > > == Build lib/librte_eal/linuxapp/kni > LD > /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp- > gcc/build/lib/librte_eal/linuxapp/kni/built-in.o > CC [M] > /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp- > gcc/build/lib/librte_eal/linuxapp/kni/ixgbe_main.o > /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp- > gcc/build/lib/librte_eal/linuxapp/kni/ixgbe_main.c: > In function 'ixgbe_del_mac_filter': > /home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp- > gcc/build/lib/librte_eal/linuxapp/kni/ixgbe_main.c:525:3: > error: implicit declaration of function 'compare_ether_addr' > [-Werror=implicit-function-declaration] > if (!compare_ether_addr(addr, adapter->mac_table[i].addr) && > ^ > cc1: all warnings being treated as errors > make[10]: *** > [/home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp- > gcc/build/lib/librte_eal/linuxapp/kni/ixgbe_main.o] > Error 1 > make[9]: *** > [_module_/home/stack/dpdk/DPDK-1.6.0/x86_64-default-linuxapp- > gcc/build/lib/librte_eal/linuxapp/kni] > Error 2 > make[8]: *** [sub-make] Error 2 > make[7]: *** [rte_kni.ko] Error 2 > make[6]: *** [kni] Error 2 > make[5]: *** [linuxapp] Error 2 > make[4]: *** [librte_eal] Error 2 > make[3]: *** [lib] Error 2 > make[2]: *** [all] Error 2 > make[1]: *** [x86_64-default-linuxapp-gcc_install] Error 2 > make: *** [install] Error 2 > > Honestly, I've never been able to compile DPDK successfully... I had been > trying to compile it on CentOS 6.5, and was failed. Then I changed OS from > CentOS to Fedora, but there are still lots of errors. > > Best regards > > Byeong-Gi KIM To compile DPDK, you don't need to export RTE_TARGET, that's just for apps. Anyway, have you tried to compile the latest dpdk version? Just remember to use different target: x86_64-native-linuxapp-gcc. Regards, Pablo ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Error while compiling DPDK [not found] ` <CAEHt_JY7+sLzAUhNOt8dZ6amaWNLz4nAz8JeSyW8w=7EH4AFXw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2014-07-14 1:00 ` Choi, Sy Jong @ 2014-07-14 11:46 ` Neil Horman 1 sibling, 0 replies; 11+ messages in thread From: Neil Horman @ 2014-07-14 11:46 UTC (permalink / raw) To: BYEONG-GI KIM; +Cc: dev-VfR2kkLFssw, Dpdk-ovs-y27Ovi1pjclAfugRpC6u6w On Mon, Jul 14, 2014 at 09:24:52AM +0900, BYEONG-GI KIM wrote: > Hello. > > An error occured while compiling DPDK 1.6.0r2 as below: > > [root@compute dpdk-1.6.0r2]# make install T=x86_64*gcc > ...Installing... > /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c: In function > ‘rte_eal_init’: > /ovdk/dpdk/dpdk-1.6.0r2/lib/librte_eal/bsdapp/eal/eal.c:873:2: error: > format ‘%p’ expects argument of type ‘void *’, but argument 5 has type > ‘pthread_t’ [-Werror=format=] > RTE_LOG(DEBUG, EAL, "Master core %u is ready (tid=%p)\n", > ^ > > The current OS is Fedora20. What should I do?... > > Best regards > > Byeong-Gi KIM > FWIW, The dpdk is already packaged for fedora. Neil ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2014-07-14 11:46 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-07-14 0:24 Error while compiling DPDK BYEONG-GI KIM
[not found] ` <CAEHt_JY7+sLzAUhNOt8dZ6amaWNLz4nAz8JeSyW8w=7EH4AFXw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-07-14 1:00 ` Choi, Sy Jong
[not found] ` <697F8B1B48670548A5BAB03E8283550F2D2FFC0D-j2khPEwRog0LtBVenmexd7fspsVTdybXVpNB7YpNyf8@public.gmane.org>
2014-07-14 1:24 ` BYEONG-GI KIM
[not found] ` <CAEHt_JaR66oMk1V-_Fgh6UPGEmedDrOzawkvo9G-75nEKo-gnA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-07-14 2:02 ` Masaru Oki
[not found] ` <CAFLKUz+hiZ829tVbLUz14zM2=JjR1Dv8vK=iH4iq-Y2Rqk_ahg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-07-14 2:04 ` BYEONG-GI KIM
[not found] ` <CAEHt_JZY0YRJtouL-+jogCcyLazv1Rf41=0T_OOeKTP8imH2MQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-07-14 2:40 ` Choi, Sy Jong
[not found] ` <697F8B1B48670548A5BAB03E8283550F2D300085-j2khPEwRog0LtBVenmexd7fspsVTdybXVpNB7YpNyf8@public.gmane.org>
2014-07-14 3:28 ` BYEONG-GI KIM
[not found] ` <CAEHt_JbGRk3PahkkoYtBLNdpN+GUrJUp=85HQOLze=jFg5kMPw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-07-14 4:32 ` Choi, Sy Jong
[not found] ` <697F8B1B48670548A5BAB03E8283550F2D3000F3-j2khPEwRog0LtBVenmexd7fspsVTdybXVpNB7YpNyf8@public.gmane.org>
2014-07-14 4:43 ` BYEONG-GI KIM
[not found] ` <CAEHt_JahewNF2DUfNkbb+3j8==-dG-sDCMJsr4BHi1t3+69BgQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-07-14 8:27 ` De Lara Guarch, Pablo
2014-07-14 11:46 ` Neil Horman
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).