Re: multiple VLAN IDs for SR-IOV ports

[James Yu <ypyu2011-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

Patel,

I can use the following command to add one VLAN with VID of 3 to VF 0 of
eth6

ip link set eth6 vf 0 vlan 3

Could you show me an example of adding 2 VLAN IDs such as VID of 3 and 13
to the same VF 0 ? I want VF 0 to pass traffic from VLAN 3 and 13. How do I
do that ?
>From the man page of ip, I do not see it describes about adding more than
one VLAN IDs to the same VF port.
Can I use this ?
ip link set eth6 vf0 vlan 3,13


Thanks

James


On Sat, Feb 1, 2014 at 9:13 AM, Jose Gavine Cueto <pepedocs-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>wrote:

> hi,
>
>
> On Thu, Jan 30, 2014 at 2:45 PM, James Yu <ypyu2011-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>
>> Any one know what commands to use on the KVM host to add multiple VLAN IDs
>> to a SR-IOV port ?
>>
>> I could only add one VLAN ID using
>>
>> ip link set ethN vf NUM vlan VLANID
>>
>
> What do you mean by "multiple VLAN IDs" ?  ethN and vf NUM here let's you
> add more than one vlan id.
>
>
>>
>> Also do I have to call any routine on the DPDK side to add those VIDs ?
>>
>> James
>>
>
>
>
> --
> To stop learning is like to stop loving.
>