* hw.nic_uio.bdfs
@ 2014-03-26 5:35 Fred Pedrisa
[not found] ` <COL131-DS45B88A00BD19770A807E5B0640-MsuGFMq8XAE@public.gmane.org>
[not found] ` <013601cf48bb$0e1ed6a0$2a5c83e0$@stratosphere.co.jp>
0 siblings, 2 replies; 11+ messages in thread
From: Fred Pedrisa @ 2014-03-26 5:35 UTC (permalink / raw)
To: dev-VfR2kkLFssw
Hi, guys.
This variable is not working as intended for FreeBSD :(
It does not dettach nic_uio from the wanted ports :/
^ permalink raw reply [flat|nested] 11+ messages in thread[parent not found: <COL131-DS45B88A00BD19770A807E5B0640-MsuGFMq8XAE@public.gmane.org>]
* Re: hw.nic_uio.bdfs [not found] ` <COL131-DS45B88A00BD19770A807E5B0640-MsuGFMq8XAE@public.gmane.org> @ 2014-03-26 6:15 ` Masaru Oki 0 siblings, 0 replies; 11+ messages in thread From: Masaru Oki @ 2014-03-26 6:15 UTC (permalink / raw) To: Fred Pedrisa; +Cc: dev-VfR2kkLFssw Hi, I tried with Intel version 1.6.0 and FreeBSD 9.2-RELEASE on VMware Player. kldload nic_uio by hand, works fine. But kldunload nic_uio only detach uio driver, don't re-attach kernel driver. [oki@ ~]$ cat /boot/loader.conf ############################################################## ### User settings ########################################## ############################################################## hw.contigmem.num_buffers=64 hw.contigmem.buffer_size=2097152 hw.nic_uio.bdfs="2:5:0,2:6:0" contigmem_load="YES" #nic_uio_load="YES" [oki@ ~]$ pciconf -l | egrep '(em|uio)' em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 em1@pci0:2:5:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 em2@pci0:2:6:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 [oki@ ~]$ kenv hw.nic_uio.bdfs 2:5:0,2:6:0 [oki@ ~]$ sudo kldload nic_uio Password: [oki@ ~]$ pciconf -l | egrep '(em|uio)' em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 nic_uio0@pci0:2:5:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 nic_uio1@pci0:2:6:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 [oki@ ~]$ sudo kldunload nic_uio [oki@ ~]$ pciconf -l | egrep '(em|uio)' em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 [oki@ ~]$ 2014-03-26 14:35 GMT+09:00 Fred Pedrisa <fredhps10-PkbjNfxxIARBDgjK7y7TUQ@public.gmane.org>: > Hi, guys. > > > > This variable is not working as intended for FreeBSD :( > > > > It does not dettach nic_uio from the wanted ports :/ > > > > ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <013601cf48bb$0e1ed6a0$2a5c83e0$@stratosphere.co.jp>]
* RES: hw.nic_uio.bdfs [not found] ` <013601cf48bb$0e1ed6a0$2a5c83e0$@stratosphere.co.jp> @ 2014-03-26 6:20 ` Fred Pedrisa [not found] ` <COL131-DS10C032EEFFC3DF69D14D4FB0640-MsuGFMq8XAE@public.gmane.org> [not found] ` <014d01cf48be$f02c3990$d084acb0$@stratosphere.co.jp> 0 siblings, 2 replies; 11+ messages in thread From: Fred Pedrisa @ 2014-03-26 6:20 UTC (permalink / raw) To: 'Masaru Oki'; +Cc: dev-VfR2kkLFssw Hello, You did not understand the purpose of that parameter, it is made to ‘avoid’ nic_uio from pursuing the wanted NICs... so they are free to be used in the system :) Right now the code to handle it is wrong and I am trying to fix it myself. De: Masaru Oki [mailto:m-oki-kJJssGRo5Gr08ZWpFnN8/c8NsWr+9BEh@public.gmane.org] Enviada em: quarta-feira, 26 de março de 2014 03:16 Para: Fred Pedrisa Cc: dev-VfR2kkLFssw@public.gmane.org Assunto: Re: [dpdk-dev] hw.nic_uio.bdfs Hi, I tried with Intel version 1.6.0 and FreeBSD 9.2-RELEASE on VMware Player. kldload nic_uio by hand, works fine. But kldunload nic_uio only detach uio driver, don't re-attach kernel driver. [oki@ ~]$ cat /boot/loader.conf ############################################################## ### User settings ########################################## ############################################################## hw.contigmem.num_buffers=64 hw.contigmem.buffer_size=2097152 hw.nic_uio.bdfs="2:5:0,2:6:0" contigmem_load="YES" #nic_uio_load="YES" [oki@ ~]$ pciconf -l | egrep '(em|uio)' em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 em1@pci0:2:5:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 em2@pci0:2:6:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 [oki@ ~]$ kenv hw.nic_uio.bdfs 2:5:0,2:6:0 [oki@ ~]$ sudo kldload nic_uio Password: [oki@ ~]$ pciconf -l | egrep '(em|uio)' em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 nic_uio0@pci0:2:5:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 nic_uio1@pci0:2:6:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 [oki@ ~]$ sudo kldunload nic_uio [oki@ ~]$ pciconf -l | egrep '(em|uio)' em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 [oki@ ~]$ 2014-03-26 14:35 GMT+09:00 Fred Pedrisa <fredhps10-PkbjNfxxIARBDgjK7y7TUQ@public.gmane.org>: Hi, guys. This variable is not working as intended for FreeBSD :( It does not dettach nic_uio from the wanted ports :/ ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <COL131-DS10C032EEFFC3DF69D14D4FB0640-MsuGFMq8XAE@public.gmane.org>]
* Re: hw.nic_uio.bdfs [not found] ` <COL131-DS10C032EEFFC3DF69D14D4FB0640-MsuGFMq8XAE@public.gmane.org> @ 2014-03-26 6:42 ` Masaru Oki 0 siblings, 0 replies; 11+ messages in thread From: Masaru Oki @ 2014-03-26 6:42 UTC (permalink / raw) To: Fred Pedrisa; +Cc: dev-VfR2kkLFssw avoid??? want you hw.nic_uio.avoid_bdfs? nic_uio behavior I guessed 1. detach kernel driver specified by hw.nic_uio.bdfs 2. attach nic_uio driver for all NICs not attached. but 2. is not correct, I think. 2014-03-26 15:20 GMT+09:00 Fred Pedrisa <fredhps10-PkbjNfxxIARBDgjK7y7TUQ@public.gmane.org>: > Hello, > > > > You did not understand the purpose of that parameter, it is made to > 'avoid' nic_uio from pursuing the wanted NICs... so they are free to be > used in the system :) > > > > Right now the code to handle it is wrong and I am trying to fix it myself. > > > > *De:* Masaru Oki [mailto:m-oki-kJJssGRo5Gr08ZWpFnN8/c8NsWr+9BEh@public.gmane.org] > *Enviada em:* quarta-feira, 26 de março de 2014 03:16 > *Para:* Fred Pedrisa > *Cc:* dev-VfR2kkLFssw@public.gmane.org > *Assunto:* Re: [dpdk-dev] hw.nic_uio.bdfs > > > > Hi, > > I tried with Intel version 1.6.0 and FreeBSD 9.2-RELEASE on VMware Player. > > kldload nic_uio by hand, works fine. > But kldunload nic_uio only detach uio driver, don't re-attach kernel > driver. > > [oki@ ~]$ cat /boot/loader.conf > ############################################################## > ### User settings ########################################## > ############################################################## > hw.contigmem.num_buffers=64 > hw.contigmem.buffer_size=2097152 > hw.nic_uio.bdfs="2:5:0,2:6:0" > contigmem_load="YES" > #nic_uio_load="YES" > [oki@ ~]$ pciconf -l | egrep '(em|uio)' > em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 > hdr=0x00 > em1@pci0:2:5:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 > hdr=0x00 > em2@pci0:2:6:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 > hdr=0x00 > [oki@ ~]$ kenv hw.nic_uio.bdfs > 2:5:0,2:6:0 > [oki@ ~]$ sudo kldload nic_uio > Password: > [oki@ ~]$ pciconf -l | egrep '(em|uio)' > em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 > hdr=0x00 > nic_uio0@pci0:2:5:0: class=0x020000 card=0x075015ad chip=0x100f8086 > rev=0x01 hdr=0x00 > nic_uio1@pci0:2:6:0: class=0x020000 card=0x075015ad chip=0x100f8086 > rev=0x01 hdr=0x00 > [oki@ ~]$ sudo kldunload nic_uio > [oki@ ~]$ pciconf -l | egrep '(em|uio)' > em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 > hdr=0x00 > [oki@ ~]$ > > > > 2014-03-26 14:35 GMT+09:00 Fred Pedrisa <fredhps10-PkbjNfxxIARBDgjK7y7TUQ@public.gmane.org>: > > Hi, guys. > > > > > This variable is not working as intended for FreeBSD :( > > > > It does not dettach nic_uio from the wanted ports :/ > > > > ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <014d01cf48be$f02c3990$d084acb0$@stratosphere.co.jp>]
* RES: hw.nic_uio.bdfs [not found] ` <014d01cf48be$f02c3990$d084acb0$@stratosphere.co.jp> @ 2014-03-26 6:49 ` Fred Pedrisa [not found] ` <COL131-DS688FD7DF0F374C5AFDAD2B0640-MsuGFMq8XAE@public.gmane.org> [not found] ` <016201cf48c2$59f0ead0$0dd2c070$@stratosphere.co.jp> 0 siblings, 2 replies; 11+ messages in thread From: Fred Pedrisa @ 2014-03-26 6:49 UTC (permalink / raw) To: 'Masaru Oki'; +Cc: dev-VfR2kkLFssw Hello, By default nic_uio takes all the NICs for itself… So in theory, you needed an option to reserve some NIC ports to your system, without DPDK taking it for itself… De: Masaru Oki [mailto:m-oki-kJJssGRo5Gr08ZWpFnN8/c8NsWr+9BEh@public.gmane.org] Enviada em: quarta-feira, 26 de março de 2014 03:43 Para: Fred Pedrisa Cc: dev-VfR2kkLFssw@public.gmane.org Assunto: Re: [dpdk-dev] hw.nic_uio.bdfs avoid??? want you hw.nic_uio.avoid_bdfs? nic_uio behavior I guessed 1. detach kernel driver specified by hw.nic_uio.bdfs 2. attach nic_uio driver for all NICs not attached. but 2. is not correct, I think. 2014-03-26 15:20 GMT+09:00 Fred Pedrisa <fredhps10-PkbjNfxxIARBDgjK7y7TUQ@public.gmane.org>: Hello, You did not understand the purpose of that parameter, it is made to ‘avoid’ nic_uio from pursuing the wanted NICs... so they are free to be used in the system :) Right now the code to handle it is wrong and I am trying to fix it myself. De: Masaru Oki [mailto:m-oki-kJJssGRo5Gr08ZWpFnN8/c8NsWr+9BEh@public.gmane.org] Enviada em: quarta-feira, 26 de março de 2014 03:16 Para: Fred Pedrisa Cc: dev-VfR2kkLFssw@public.gmane.org Assunto: Re: [dpdk-dev] hw.nic_uio.bdfs Hi, I tried with Intel version 1.6.0 and FreeBSD 9.2-RELEASE on VMware Player. kldload nic_uio by hand, works fine. But kldunload nic_uio only detach uio driver, don't re-attach kernel driver. [oki@ ~]$ cat /boot/loader.conf ############################################################## ### User settings ########################################## ############################################################## hw.contigmem.num_buffers=64 hw.contigmem.buffer_size=2097152 hw.nic_uio.bdfs="2:5:0,2:6:0" contigmem_load="YES" #nic_uio_load="YES" [oki@ ~]$ pciconf -l | egrep '(em|uio)' em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 em1@pci0:2:5:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 em2@pci0:2:6:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 [oki@ ~]$ kenv hw.nic_uio.bdfs 2:5:0,2:6:0 [oki@ ~]$ sudo kldload nic_uio Password: [oki@ ~]$ pciconf -l | egrep '(em|uio)' em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 nic_uio0@pci0:2:5:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 nic_uio1@pci0:2:6:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 [oki@ ~]$ sudo kldunload nic_uio [oki@ ~]$ pciconf -l | egrep '(em|uio)' em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 [oki@ ~]$ 2014-03-26 14:35 GMT+09:00 Fred Pedrisa <fredhps10-PkbjNfxxIARBDgjK7y7TUQ@public.gmane.org>: Hi, guys. This variable is not working as intended for FreeBSD :( It does not dettach nic_uio from the wanted ports :/ ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <COL131-DS688FD7DF0F374C5AFDAD2B0640-MsuGFMq8XAE@public.gmane.org>]
* RES: RES: hw.nic_uio.bdfs [not found] ` <COL131-DS688FD7DF0F374C5AFDAD2B0640-MsuGFMq8XAE@public.gmane.org> @ 2014-03-26 6:52 ` Fred Pedrisa 2014-03-26 7:07 ` hw.nic_uio.bdfs Masaru Oki 1 sibling, 0 replies; 11+ messages in thread From: Fred Pedrisa @ 2014-03-26 6:52 UTC (permalink / raw) To: 'Masaru Oki'; +Cc: dev-VfR2kkLFssw Hello, Anyways, here is my proposition for this code : static void nic_uio_load(void) { char *remaining; long bus = 0, device = 0, function = 0; char bdf_str[1024]; int i, j, len; device_t dev; memset(bdf_str, 0, sizeof(bdf_str)); TUNABLE_STR_FETCH("hw.nic_uio.bdfs", bdf_str, sizeof(bdf_str)); remaining = bdf_str; len = strlen(remaining); for (i = 0; remaining && len >= 5 && i < len;i+=6) { if ( remaining[i + 1] == ':' && remaining[i + 3] == ':' ) { bus = strtol(&remaining[i + 0],NULL,0); device = strtol(&remaining[i + 2],NULL,0); function = strtol(&remaining[i + 4],NULL,0); dev = pci_find_bsf(bus, device, function); if (dev != NULL) { for (j = 0; j < NUM_DEVICES; j++) { if (pci_get_vendor(dev) == devices[j].vend && pci_get_device(dev) == devices[j].dev) { device_detach(dev); } } } } } } I think it looks better this way. -----Mensagem original----- De: dev [mailto:dev-bounces-VfR2kkLFssw@public.gmane.org] Em nome de Fred Pedrisa Enviada em: quarta-feira, 26 de março de 2014 03:50 Para: 'Masaru Oki' Cc: dev-VfR2kkLFssw@public.gmane.org Assunto: [dpdk-dev] RES: hw.nic_uio.bdfs Hello, By default nic_uio takes all the NICs for itself… So in theory, you needed an option to reserve some NIC ports to your system, without DPDK taking it for itself… De: Masaru Oki [mailto:m-oki-kJJssGRo5Gr08ZWpFnN8/c8NsWr+9BEh@public.gmane.org] Enviada em: quarta-feira, 26 de março de 2014 03:43 Para: Fred Pedrisa Cc: dev-VfR2kkLFssw@public.gmane.org Assunto: Re: [dpdk-dev] hw.nic_uio.bdfs avoid??? want you hw.nic_uio.avoid_bdfs? nic_uio behavior I guessed 1. detach kernel driver specified by hw.nic_uio.bdfs 2. attach nic_uio driver for all NICs not attached. but 2. is not correct, I think. 2014-03-26 15:20 GMT+09:00 Fred Pedrisa <fredhps10-PkbjNfxxIARBDgjK7y7TUQ@public.gmane.org>: Hello, You did not understand the purpose of that parameter, it is made to ‘avoid’ nic_uio from pursuing the wanted NICs... so they are free to be used in the system :) Right now the code to handle it is wrong and I am trying to fix it myself. De: Masaru Oki [mailto:m-oki-kJJssGRo5Gr08ZWpFnN8/c8NsWr+9BEh@public.gmane.org] Enviada em: quarta-feira, 26 de março de 2014 03:16 Para: Fred Pedrisa Cc: dev-VfR2kkLFssw@public.gmane.org Assunto: Re: [dpdk-dev] hw.nic_uio.bdfs Hi, I tried with Intel version 1.6.0 and FreeBSD 9.2-RELEASE on VMware Player. kldload nic_uio by hand, works fine. But kldunload nic_uio only detach uio driver, don't re-attach kernel driver. [oki@ ~]$ cat /boot/loader.conf ############################################################## ### User settings ########################################## ############################################################## hw.contigmem.num_buffers=64 hw.contigmem.buffer_size=2097152 hw.nic_uio.bdfs="2:5:0,2:6:0" contigmem_load="YES" #nic_uio_load="YES" [oki@ ~]$ pciconf -l | egrep '(em|uio)' em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 em1@pci0:2:5:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 em2@pci0:2:6:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 [oki@ ~]$ kenv hw.nic_uio.bdfs 2:5:0,2:6:0 [oki@ ~]$ sudo kldload nic_uio Password: [oki@ ~]$ pciconf -l | egrep '(em|uio)' em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 nic_uio0@pci0:2:5:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 nic_uio1@pci0:2:6:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 [oki@ ~]$ sudo kldunload nic_uio [oki@ ~]$ pciconf -l | egrep '(em|uio)' em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 [oki@ ~]$ 2014-03-26 14:35 GMT+09:00 Fred Pedrisa <fredhps10-PkbjNfxxIARBDgjK7y7TUQ@public.gmane.org>: Hi, guys. This variable is not working as intended for FreeBSD :( It does not dettach nic_uio from the wanted ports :/ ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: hw.nic_uio.bdfs [not found] ` <COL131-DS688FD7DF0F374C5AFDAD2B0640-MsuGFMq8XAE@public.gmane.org> 2014-03-26 6:52 ` RES: " Fred Pedrisa @ 2014-03-26 7:07 ` Masaru Oki 1 sibling, 0 replies; 11+ messages in thread From: Masaru Oki @ 2014-03-26 7:07 UTC (permalink / raw) To: Fred Pedrisa; +Cc: dev-VfR2kkLFssw > By default nic_uio takes all the NICs for itself... Yes. I think nic_uio_probe should check hw.nic_uio.bdfs. 2014-03-26 15:49 GMT+09:00 Fred Pedrisa <fredhps10-PkbjNfxxIARBDgjK7y7TUQ@public.gmane.org>: > Hello, > > > > By default nic_uio takes all the NICs for itself... > > > > So in theory, you needed an option to reserve some NIC ports to your > system, without DPDK taking it for itself... > > > > *De:* Masaru Oki [mailto:m-oki-kJJssGRo5Gr08ZWpFnN8/c8NsWr+9BEh@public.gmane.org] > *Enviada em:* quarta-feira, 26 de março de 2014 03:43 > > *Para:* Fred Pedrisa > *Cc:* dev-VfR2kkLFssw@public.gmane.org > *Assunto:* Re: [dpdk-dev] hw.nic_uio.bdfs > > > > avoid??? want you hw.nic_uio.avoid_bdfs? > > > nic_uio behavior I guessed > 1. detach kernel driver specified by hw.nic_uio.bdfs > > 2. attach nic_uio driver for all NICs not attached. > > but 2. is not correct, I think. > > > > > > 2014-03-26 15:20 GMT+09:00 Fred Pedrisa <fredhps10-PkbjNfxxIARBDgjK7y7TUQ@public.gmane.org>: > > Hello, > > > > You did not understand the purpose of that parameter, it is made to > 'avoid' nic_uio from pursuing the wanted NICs... so they are free to be > used in the system :) > > > > Right now the code to handle it is wrong and I am trying to fix it myself. > > > > *De:* Masaru Oki [mailto:m-oki-kJJssGRo5Gr08ZWpFnN8/c8NsWr+9BEh@public.gmane.org] > *Enviada em:* quarta-feira, 26 de março de 2014 03:16 > *Para:* Fred Pedrisa > *Cc:* dev-VfR2kkLFssw@public.gmane.org > *Assunto:* Re: [dpdk-dev] hw.nic_uio.bdfs > > > > Hi, > > I tried with Intel version 1.6.0 and FreeBSD 9.2-RELEASE on VMware Player. > > kldload nic_uio by hand, works fine. > But kldunload nic_uio only detach uio driver, don't re-attach kernel > driver. > > [oki@ ~]$ cat /boot/loader.conf > ############################################################## > ### User settings ########################################## > ############################################################## > hw.contigmem.num_buffers=64 > hw.contigmem.buffer_size=2097152 > hw.nic_uio.bdfs="2:5:0,2:6:0" > contigmem_load="YES" > #nic_uio_load="YES" > [oki@ ~]$ pciconf -l | egrep '(em|uio)' > em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 > hdr=0x00 > em1@pci0:2:5:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 > hdr=0x00 > em2@pci0:2:6:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 > hdr=0x00 > [oki@ ~]$ kenv hw.nic_uio.bdfs > 2:5:0,2:6:0 > [oki@ ~]$ sudo kldload nic_uio > Password: > [oki@ ~]$ pciconf -l | egrep '(em|uio)' > em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 > hdr=0x00 > nic_uio0@pci0:2:5:0: class=0x020000 card=0x075015ad chip=0x100f8086 > rev=0x01 hdr=0x00 > nic_uio1@pci0:2:6:0: class=0x020000 card=0x075015ad chip=0x100f8086 > rev=0x01 hdr=0x00 > [oki@ ~]$ sudo kldunload nic_uio > [oki@ ~]$ pciconf -l | egrep '(em|uio)' > em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 > hdr=0x00 > [oki@ ~]$ > > > > 2014-03-26 14:35 GMT+09:00 Fred Pedrisa <fredhps10-PkbjNfxxIARBDgjK7y7TUQ@public.gmane.org>: > > Hi, guys. > > > > > > This variable is not working as intended for FreeBSD :( > > > > It does not dettach nic_uio from the wanted ports :/ > > > > > ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <016201cf48c2$59f0ead0$0dd2c070$@stratosphere.co.jp>]
* RES: hw.nic_uio.bdfs [not found] ` <016201cf48c2$59f0ead0$0dd2c070$@stratosphere.co.jp> @ 2014-03-26 7:16 ` Fred Pedrisa [not found] ` <016f01cf48c3$99aedc30$cd0c9490$@hotmail.com> 1 sibling, 0 replies; 11+ messages in thread From: Fred Pedrisa @ 2014-03-26 7:16 UTC (permalink / raw) To: 'Masaru Oki'; +Cc: dev-VfR2kkLFssw Hello, Yes, I am writing a fix for this too ;) De: Masaru Oki [mailto:m-oki-kJJssGRo5Gr08ZWpFnN8/c8NsWr+9BEh@public.gmane.org] Enviada em: quarta-feira, 26 de março de 2014 04:08 Para: Fred Pedrisa Cc: dev-VfR2kkLFssw@public.gmane.org Assunto: Re: [dpdk-dev] hw.nic_uio.bdfs > By default nic_uio takes all the NICs for itself… Yes. I think nic_uio_probe should check hw.nic_uio.bdfs. 2014-03-26 15:49 GMT+09:00 Fred Pedrisa <fredhps10-PkbjNfxxIARBDgjK7y7TUQ@public.gmane.org>: Hello, By default nic_uio takes all the NICs for itself… So in theory, you needed an option to reserve some NIC ports to your system, without DPDK taking it for itself… De: Masaru Oki [mailto:m-oki-kJJssGRo5Gr08ZWpFnN8/c8NsWr+9BEh@public.gmane.org] Enviada em: quarta-feira, 26 de março de 2014 03:43 Para: Fred Pedrisa Cc: dev-VfR2kkLFssw@public.gmane.org Assunto: Re: [dpdk-dev] hw.nic_uio.bdfs avoid??? want you hw.nic_uio.avoid_bdfs? nic_uio behavior I guessed 1. detach kernel driver specified by hw.nic_uio.bdfs 2. attach nic_uio driver for all NICs not attached. but 2. is not correct, I think. 2014-03-26 15:20 GMT+09:00 Fred Pedrisa <fredhps10-PkbjNfxxIARBDgjK7y7TUQ@public.gmane.org>: Hello, You did not understand the purpose of that parameter, it is made to ‘avoid’ nic_uio from pursuing the wanted NICs... so they are free to be used in the system :) Right now the code to handle it is wrong and I am trying to fix it myself. De: Masaru Oki [mailto:m-oki-kJJssGRo5Gr08ZWpFnN8/c8NsWr+9BEh@public.gmane.org] Enviada em: quarta-feira, 26 de março de 2014 03:16 Para: Fred Pedrisa Cc: dev-VfR2kkLFssw@public.gmane.org Assunto: Re: [dpdk-dev] hw.nic_uio.bdfs Hi, I tried with Intel version 1.6.0 and FreeBSD 9.2-RELEASE on VMware Player. kldload nic_uio by hand, works fine. But kldunload nic_uio only detach uio driver, don't re-attach kernel driver. [oki@ ~]$ cat /boot/loader.conf ############################################################## ### User settings ########################################## ############################################################## hw.contigmem.num_buffers=64 hw.contigmem.buffer_size=2097152 hw.nic_uio.bdfs="2:5:0,2:6:0" contigmem_load="YES" #nic_uio_load="YES" [oki@ ~]$ pciconf -l | egrep '(em|uio)' em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 em1@pci0:2:5:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 em2@pci0:2:6:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 [oki@ ~]$ kenv hw.nic_uio.bdfs 2:5:0,2:6:0 [oki@ ~]$ sudo kldload nic_uio Password: [oki@ ~]$ pciconf -l | egrep '(em|uio)' em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 nic_uio0@pci0:2:5:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 nic_uio1@pci0:2:6:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 [oki@ ~]$ sudo kldunload nic_uio [oki@ ~]$ pciconf -l | egrep '(em|uio)' em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 [oki@ ~]$ 2014-03-26 14:35 GMT+09:00 Fred Pedrisa <fredhps10-PkbjNfxxIARBDgjK7y7TUQ@public.gmane.org>: Hi, guys. This variable is not working as intended for FreeBSD :( It does not dettach nic_uio from the wanted ports :/ ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <016f01cf48c3$99aedc30$cd0c9490$@hotmail.com>]
* RES: RES: hw.nic_uio.bdfs [not found] ` <016f01cf48c3$99aedc30$cd0c9490$@hotmail.com> @ 2014-03-26 7:22 ` Fred Pedrisa [not found] ` <COL131-DS1742442E12162ABBC8639FB0640-MsuGFMq8XAE@public.gmane.org> [not found] ` <017001cf48c4$4439eaf0$ccadc0d0$@hotmail.com> 1 sibling, 1 reply; 11+ messages in thread From: Fred Pedrisa @ 2014-03-26 7:22 UTC (permalink / raw) To: 'Masaru Oki'; +Cc: dev-VfR2kkLFssw Hello, Here is my fix for probe code : static int nic_uio_probe (device_t dev) { int i, len; char *remaining; long bus = 0, device = 0, function = 0; remaining = bdf_str; len = strlen(remaining); for (i = 0; remaining && len >= 5 && i < len;i+=6) { if ( remaining[i + 1] == ':' && remaining[i + 3] == ':' ) { bus = strtol(&remaining[i + 0],NULL,0); device = strtol(&remaining[i + 2],NULL,0); function = strtol(&remaining[i + 4],NULL,0); if (dev != NULL) { if (pci_get_bus(dev) == bus && pci_get_slot(dev) == device && pci_get_function(dev) == function) { printf("nic_uio: success blocking probe of : %ld:%ld:%ld!\n", bus, device, function); return (ENXIO); } } } } for (i = 0; i < NUM_DEVICES; i++) if (pci_get_vendor(dev) == devices[i].vend && pci_get_device(dev) == devices[i].dev) { device_set_desc(dev, "Intel(R) DPDK PCI Device"); return (BUS_PROBE_SPECIFIC); } return (ENXIO); } Now it is working as intended ;) -----Mensagem original----- De: dev [mailto:dev-bounces-VfR2kkLFssw@public.gmane.org] Em nome de Fred Pedrisa Enviada em: quarta-feira, 26 de março de 2014 04:16 Para: 'Masaru Oki' Cc: dev-VfR2kkLFssw@public.gmane.org Assunto: [dpdk-dev] RES: hw.nic_uio.bdfs Hello, Yes, I am writing a fix for this too ;) De: Masaru Oki [mailto:m-oki-kJJssGRo5Gr08ZWpFnN8/c8NsWr+9BEh@public.gmane.org] Enviada em: quarta-feira, 26 de março de 2014 04:08 Para: Fred Pedrisa Cc: dev-VfR2kkLFssw@public.gmane.org Assunto: Re: [dpdk-dev] hw.nic_uio.bdfs > By default nic_uio takes all the NICs for itself… Yes. I think nic_uio_probe should check hw.nic_uio.bdfs. 2014-03-26 15:49 GMT+09:00 Fred Pedrisa <fredhps10-PkbjNfxxIARBDgjK7y7TUQ@public.gmane.org>: Hello, By default nic_uio takes all the NICs for itself… So in theory, you needed an option to reserve some NIC ports to your system, without DPDK taking it for itself… De: Masaru Oki [mailto:m-oki-kJJssGRo5Gr08ZWpFnN8/c8NsWr+9BEh@public.gmane.org] Enviada em: quarta-feira, 26 de março de 2014 03:43 Para: Fred Pedrisa Cc: dev-VfR2kkLFssw@public.gmane.org Assunto: Re: [dpdk-dev] hw.nic_uio.bdfs avoid??? want you hw.nic_uio.avoid_bdfs? nic_uio behavior I guessed 1. detach kernel driver specified by hw.nic_uio.bdfs 2. attach nic_uio driver for all NICs not attached. but 2. is not correct, I think. 2014-03-26 15:20 GMT+09:00 Fred Pedrisa <fredhps10-PkbjNfxxIARBDgjK7y7TUQ@public.gmane.org>: Hello, You did not understand the purpose of that parameter, it is made to ‘avoid’ nic_uio from pursuing the wanted NICs... so they are free to be used in the system :) Right now the code to handle it is wrong and I am trying to fix it myself. De: Masaru Oki [mailto:m-oki-kJJssGRo5Gr08ZWpFnN8/c8NsWr+9BEh@public.gmane.org] Enviada em: quarta-feira, 26 de março de 2014 03:16 Para: Fred Pedrisa Cc: dev-VfR2kkLFssw@public.gmane.org Assunto: Re: [dpdk-dev] hw.nic_uio.bdfs Hi, I tried with Intel version 1.6.0 and FreeBSD 9.2-RELEASE on VMware Player. kldload nic_uio by hand, works fine. But kldunload nic_uio only detach uio driver, don't re-attach kernel driver. [oki@ ~]$ cat /boot/loader.conf ############################################################## ### User settings ########################################## ############################################################## hw.contigmem.num_buffers=64 hw.contigmem.buffer_size=2097152 hw.nic_uio.bdfs="2:5:0,2:6:0" contigmem_load="YES" #nic_uio_load="YES" [oki@ ~]$ pciconf -l | egrep '(em|uio)' em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 em1@pci0:2:5:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 em2@pci0:2:6:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 [oki@ ~]$ kenv hw.nic_uio.bdfs 2:5:0,2:6:0 [oki@ ~]$ sudo kldload nic_uio Password: [oki@ ~]$ pciconf -l | egrep '(em|uio)' em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 nic_uio0@pci0:2:5:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 nic_uio1@pci0:2:6:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 [oki@ ~]$ sudo kldunload nic_uio [oki@ ~]$ pciconf -l | egrep '(em|uio)' em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 [oki@ ~]$ 2014-03-26 14:35 GMT+09:00 Fred Pedrisa <fredhps10-PkbjNfxxIARBDgjK7y7TUQ@public.gmane.org>: Hi, guys. This variable is not working as intended for FreeBSD :( It does not dettach nic_uio from the wanted ports :/ ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <COL131-DS1742442E12162ABBC8639FB0640-MsuGFMq8XAE@public.gmane.org>]
* Re: RES: RES: hw.nic_uio.bdfs [not found] ` <COL131-DS1742442E12162ABBC8639FB0640-MsuGFMq8XAE@public.gmane.org> @ 2014-04-17 14:05 ` Thomas Monjalon 0 siblings, 0 replies; 11+ messages in thread From: Thomas Monjalon @ 2014-04-17 14:05 UTC (permalink / raw) To: Fred Pedrisa; +Cc: dev-VfR2kkLFssw Hi Fred, 2014-03-26 04:22, Fred Pedrisa: > Here is my fix for probe code : > > static int > nic_uio_probe (device_t dev) > { > int i, len; > char *remaining; > long bus = 0, device = 0, function = 0; > remaining = bdf_str; > len = strlen(remaining); > > for (i = 0; remaining && len >= 5 && i < len;i+=6) { > if ( remaining[i + 1] == ':' && remaining[i + 3] == ':' ) { > bus = strtol(&remaining[i + 0],NULL,0); > device = strtol(&remaining[i + 2],NULL,0); > function = strtol(&remaining[i + 4],NULL,0); > if (dev != NULL) { > if (pci_get_bus(dev) == bus && > pci_get_slot(dev) == device && pci_get_function(dev) == function) { > printf("nic_uio: success blocking > probe of : %ld:%ld:%ld!\n", bus, device, function); > return (ENXIO); > } > } > } > } > > for (i = 0; i < NUM_DEVICES; i++) > if (pci_get_vendor(dev) == devices[i].vend && > pci_get_device(dev) == devices[i].dev) { > > device_set_desc(dev, "Intel(R) DPDK PCI Device"); > return (BUS_PROBE_SPECIFIC); > } > > return (ENXIO); > } > > Now it is working as intended ;) If you think a patch should be applied, please send it with git-send-email as described in http://dpdk.org/dev#send Thank you -- Thomas ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <017001cf48c4$4439eaf0$ccadc0d0$@hotmail.com>]
* RES: RES: RES: hw.nic_uio.bdfs [not found] ` <017001cf48c4$4439eaf0$ccadc0d0$@hotmail.com> @ 2014-03-26 7:51 ` Fred Pedrisa 0 siblings, 0 replies; 11+ messages in thread From: Fred Pedrisa @ 2014-03-26 7:51 UTC (permalink / raw) To: 'Masaru Oki'; +Cc: dev-VfR2kkLFssw Oh, don't forget to make : static char bdf_str[1024]; Anywhere in the nic_uio.c file, so this way the other methods can check the content :-) And remove the local declaration from nic_uio_load. -----Mensagem original----- De: dev [mailto:dev-bounces-VfR2kkLFssw@public.gmane.org] Em nome de Fred Pedrisa Enviada em: quarta-feira, 26 de março de 2014 04:22 Para: 'Masaru Oki' Cc: dev-VfR2kkLFssw@public.gmane.org Assunto: [dpdk-dev] RES: RES: hw.nic_uio.bdfs Hello, Here is my fix for probe code : static int nic_uio_probe (device_t dev) { int i, len; char *remaining; long bus = 0, device = 0, function = 0; remaining = bdf_str; len = strlen(remaining); for (i = 0; remaining && len >= 5 && i < len;i+=6) { if ( remaining[i + 1] == ':' && remaining[i + 3] == ':' ) { bus = strtol(&remaining[i + 0],NULL,0); device = strtol(&remaining[i + 2],NULL,0); function = strtol(&remaining[i + 4],NULL,0); if (dev != NULL) { if (pci_get_bus(dev) == bus && pci_get_slot(dev) == device && pci_get_function(dev) == function) { printf("nic_uio: success blocking probe of : %ld:%ld:%ld!\n", bus, device, function); return (ENXIO); } } } } for (i = 0; i < NUM_DEVICES; i++) if (pci_get_vendor(dev) == devices[i].vend && pci_get_device(dev) == devices[i].dev) { device_set_desc(dev, "Intel(R) DPDK PCI Device"); return (BUS_PROBE_SPECIFIC); } return (ENXIO); } Now it is working as intended ;) -----Mensagem original----- De: dev [mailto:dev-bounces-VfR2kkLFssw@public.gmane.org] Em nome de Fred Pedrisa Enviada em: quarta-feira, 26 de março de 2014 04:16 Para: 'Masaru Oki' Cc: dev-VfR2kkLFssw@public.gmane.org Assunto: [dpdk-dev] RES: hw.nic_uio.bdfs Hello, Yes, I am writing a fix for this too ;) De: Masaru Oki [mailto:m-oki-kJJssGRo5Gr08ZWpFnN8/c8NsWr+9BEh@public.gmane.org] Enviada em: quarta-feira, 26 de março de 2014 04:08 Para: Fred Pedrisa Cc: dev-VfR2kkLFssw@public.gmane.org Assunto: Re: [dpdk-dev] hw.nic_uio.bdfs > By default nic_uio takes all the NICs for itself… Yes. I think nic_uio_probe should check hw.nic_uio.bdfs. 2014-03-26 15:49 GMT+09:00 Fred Pedrisa <fredhps10-PkbjNfxxIARBDgjK7y7TUQ@public.gmane.org>: Hello, By default nic_uio takes all the NICs for itself… So in theory, you needed an option to reserve some NIC ports to your system, without DPDK taking it for itself… De: Masaru Oki [mailto:m-oki-kJJssGRo5Gr08ZWpFnN8/c8NsWr+9BEh@public.gmane.org] Enviada em: quarta-feira, 26 de março de 2014 03:43 Para: Fred Pedrisa Cc: dev-VfR2kkLFssw@public.gmane.org Assunto: Re: [dpdk-dev] hw.nic_uio.bdfs avoid??? want you hw.nic_uio.avoid_bdfs? nic_uio behavior I guessed 1. detach kernel driver specified by hw.nic_uio.bdfs 2. attach nic_uio driver for all NICs not attached. but 2. is not correct, I think. 2014-03-26 15:20 GMT+09:00 Fred Pedrisa <fredhps10-PkbjNfxxIARBDgjK7y7TUQ@public.gmane.org>: Hello, You did not understand the purpose of that parameter, it is made to ‘avoid’ nic_uio from pursuing the wanted NICs... so they are free to be used in the system :) Right now the code to handle it is wrong and I am trying to fix it myself. De: Masaru Oki [mailto:m-oki-kJJssGRo5Gr08ZWpFnN8/c8NsWr+9BEh@public.gmane.org] Enviada em: quarta-feira, 26 de março de 2014 03:16 Para: Fred Pedrisa Cc: dev-VfR2kkLFssw@public.gmane.org Assunto: Re: [dpdk-dev] hw.nic_uio.bdfs Hi, I tried with Intel version 1.6.0 and FreeBSD 9.2-RELEASE on VMware Player. kldload nic_uio by hand, works fine. But kldunload nic_uio only detach uio driver, don't re-attach kernel driver. [oki@ ~]$ cat /boot/loader.conf ############################################################## ### User settings ########################################## ############################################################## hw.contigmem.num_buffers=64 hw.contigmem.buffer_size=2097152 hw.nic_uio.bdfs="2:5:0,2:6:0" contigmem_load="YES" #nic_uio_load="YES" [oki@ ~]$ pciconf -l | egrep '(em|uio)' em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 em1@pci0:2:5:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 em2@pci0:2:6:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 [oki@ ~]$ kenv hw.nic_uio.bdfs 2:5:0,2:6:0 [oki@ ~]$ sudo kldload nic_uio Password: [oki@ ~]$ pciconf -l | egrep '(em|uio)' em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 nic_uio0@pci0:2:5:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 nic_uio1@pci0:2:6:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 [oki@ ~]$ sudo kldunload nic_uio [oki@ ~]$ pciconf -l | egrep '(em|uio)' em0@pci0:2:1:0: class=0x020000 card=0x075015ad chip=0x100f8086 rev=0x01 hdr=0x00 [oki@ ~]$ 2014-03-26 14:35 GMT+09:00 Fred Pedrisa <fredhps10-PkbjNfxxIARBDgjK7y7TUQ@public.gmane.org>: Hi, guys. This variable is not working as intended for FreeBSD :( It does not dettach nic_uio from the wanted ports :/ ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2014-04-17 14:05 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-03-26 5:35 hw.nic_uio.bdfs Fred Pedrisa
[not found] ` <COL131-DS45B88A00BD19770A807E5B0640-MsuGFMq8XAE@public.gmane.org>
2014-03-26 6:15 ` hw.nic_uio.bdfs Masaru Oki
[not found] ` <013601cf48bb$0e1ed6a0$2a5c83e0$@stratosphere.co.jp>
2014-03-26 6:20 ` RES: hw.nic_uio.bdfs Fred Pedrisa
[not found] ` <COL131-DS10C032EEFFC3DF69D14D4FB0640-MsuGFMq8XAE@public.gmane.org>
2014-03-26 6:42 ` hw.nic_uio.bdfs Masaru Oki
[not found] ` <014d01cf48be$f02c3990$d084acb0$@stratosphere.co.jp>
2014-03-26 6:49 ` RES: hw.nic_uio.bdfs Fred Pedrisa
[not found] ` <COL131-DS688FD7DF0F374C5AFDAD2B0640-MsuGFMq8XAE@public.gmane.org>
2014-03-26 6:52 ` RES: " Fred Pedrisa
2014-03-26 7:07 ` hw.nic_uio.bdfs Masaru Oki
[not found] ` <016201cf48c2$59f0ead0$0dd2c070$@stratosphere.co.jp>
2014-03-26 7:16 ` RES: hw.nic_uio.bdfs Fred Pedrisa
[not found] ` <016f01cf48c3$99aedc30$cd0c9490$@hotmail.com>
2014-03-26 7:22 ` RES: " Fred Pedrisa
[not found] ` <COL131-DS1742442E12162ABBC8639FB0640-MsuGFMq8XAE@public.gmane.org>
2014-04-17 14:05 ` Thomas Monjalon
[not found] ` <017001cf48c4$4439eaf0$ccadc0d0$@hotmail.com>
2014-03-26 7:51 ` RES: " Fred Pedrisa
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).