dev.dpdk.org archive mirror
 help / color / mirror / Atom feed
From: Yong Wang <yongwang-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org>
To: Stephen Hemminger
	<stephen-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>,
	"dev-VfR2kkLFssw@public.gmane.org"
	<dev-VfR2kkLFssw@public.gmane.org>
Cc: Stephen Hemminger <shemming-43mecJUBy8ZBDgjK7y7TUQ@public.gmane.org>
Subject: Re: [PATCH 2/7] vmxnet3: remove mtu check
Date: Wed, 11 Feb 2015 00:54:51 +0000	[thread overview]
Message-ID: <D0FFDBB1.34A9B%yongwang@vmware.com> (raw)
In-Reply-To: <1418793196-17953-3-git-send-email-stephen-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>


On 12/16/14, 9:13 PM, "Stephen Hemminger" <stephen-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
wrote:

>From: Stephen Hemminger <shemming-43mecJUBy8ZBDgjK7y7TUQ@public.gmane.org>
>
>Remove check for packets sending packets greater than MTU. No other
>driver does
>this, it should be handled at higher layer.
>
>Signed-off-by: Stephen Hemminger <stephen-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
>---
> lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c |  2 --
> lib/librte_pmd_vmxnet3/vmxnet3_ethdev.h |  1 -
> lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c   | 10 ----------
> 3 files changed, 13 deletions(-)
>
>diff --git a/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c
>b/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c
>index 30d0659..4947c78 100644
>--- a/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c
>+++ b/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c
>@@ -219,7 +219,6 @@ eth_vmxnet3_dev_init(__attribute__((unused)) struct
>eth_driver *eth_drv,
> 
> 	hw->num_rx_queues = 1;
> 	hw->num_tx_queues = 1;
>-	hw->cur_mtu = ETHER_MTU;
> 	hw->bufs_per_pkt = 1;
> 
> 	/* Check h/w version compatibility with driver. */
>@@ -394,7 +393,6 @@ vmxnet3_setup_driver_shared(struct rte_eth_dev *dev)
> 
> 	devRead->misc.queueDescPA  = hw->queueDescPA;
> 	devRead->misc.queueDescLen = hw->queue_desc_len;
>-	devRead->misc.mtu          = hw->cur_mtu;
> 	devRead->misc.numTxQueues  = hw->num_tx_queues;
> 	devRead->misc.numRxQueues  = hw->num_rx_queues;
> 
>diff --git a/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.h
>b/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.h
>index 2c180ad..258fbae 100644
>--- a/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.h
>+++ b/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.h
>@@ -101,7 +101,6 @@ struct vmxnet3_hw {
> 	uint8_t num_tx_queues;
> 	uint8_t num_rx_queues;
> 	uint8_t bufs_per_pkt;
>-	uint16_t cur_mtu;
> 
> 	Vmxnet3_TxQueueDesc   *tqd_start;	/* start address of all tx queue desc
>*/
> 	Vmxnet3_RxQueueDesc   *rqd_start;	/* start address of all rx queue desc
>*/
>diff --git a/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
>b/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
>index 9871f16..8e15784 100644
>--- a/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
>+++ b/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
>@@ -369,16 +369,6 @@ vmxnet3_xmit_pkts(void *tx_queue, struct rte_mbuf
>**tx_pkts,
> 				continue;
> 			}
> 
>-			/* Needs to minus ether header len */
>-			if (txm->data_len > (hw->cur_mtu + ETHER_HDR_LEN)) {
>-				PMD_TX_LOG(DEBUG, "Packet data_len higher than MTU");
>-				rte_pktmbuf_free(tx_pkts[nb_tx]);
>-				txq->stats.drop_total++;
>-
>-				nb_tx++;
>-				continue;
>-			}
>-
> 			txd = (Vmxnet3_TxDesc *)(txq->cmd_ring.base +
>txq->cmd_ring.next2fill);
> 			if (rte_pktmbuf_pkt_len(txm) <= VMXNET3_HDR_COPY_SIZE) {
> 				struct Vmxnet3_TxDataDesc *tdd;
>-- 
>2.1.3
>

Acked-by: Yong Wang <yongwang-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org>

  parent reply	other threads:[~2015-02-11  0:54 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-17  5:13 [PATCH 0/7] vmxnet3: driver enhancements Stephen Hemminger
     [not found] ` <1418793196-17953-1-git-send-email-stephen-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
2014-12-17  5:13   ` [PATCH 1/7] vmxnet3: add support for VLAN filtering Stephen Hemminger
     [not found]     ` <1418793196-17953-2-git-send-email-stephen-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
2015-02-12 18:40       ` Yong Wang
2014-12-17  5:13   ` [PATCH 2/7] vmxnet3: remove mtu check Stephen Hemminger
     [not found]     ` <1418793196-17953-3-git-send-email-stephen-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
2015-02-11  0:54       ` Yong Wang [this message]
2014-12-17  5:13   ` [PATCH 3/7] vmxnet3: add support for mulit-segment transmit Stephen Hemminger
     [not found]     ` <1418793196-17953-4-git-send-email-stephen-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
2015-02-11 21:15       ` Yong Wang
2014-12-17  5:13   ` [PATCH 4/7] vmxnet3: fix link state handling Stephen Hemminger
     [not found]     ` <1418793196-17953-5-git-send-email-stephen-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
2015-02-11  2:24       ` Yong Wang
2014-12-17  5:13   ` [PATCH 5/7] vmxnet3: get rid of DEBUG ifdefs Stephen Hemminger
     [not found]     ` <1418793196-17953-6-git-send-email-stephen-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
2015-02-11  0:54       ` Yong Wang
     [not found]         ` <D0FFDD6B.34A9C%yongwang-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org>
2015-02-11  2:18           ` Stephen Hemminger
2014-12-17  5:13   ` [PATCH 6/7] vmxnet3: support RSS and refactor offload Stephen Hemminger
     [not found]     ` <1418793196-17953-7-git-send-email-stephen-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
2015-02-11  1:28       ` Yong Wang
2014-12-17  5:13   ` [PATCH 7/7] vmxnet3: support jumbo frames Stephen Hemminger
2015-01-15 11:02   ` [PATCH 0/7] vmxnet3: driver enhancements Thomas Monjalon
2015-01-22  0:49     ` Stephen Hemminger
2015-01-22  9:42       ` Thomas Monjalon
  -- strict thread matches above, loose matches on Subject: below --
2015-02-26  2:31 [PATCH 1/7] vmxnet3: enable VLAN filtering Stephen Hemminger
     [not found] ` <1424917922-1979-1-git-send-email-stephen-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
2015-02-26  2:31   ` [PATCH 2/7] vmxnet3: remove mtu check Stephen Hemminger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=D0FFDBB1.34A9B%yongwang@vmware.com \
    --to=yongwang-pghwnbhtmq7qt0dzr+alfa@public.gmane.org \
    --cc=dev-VfR2kkLFssw@public.gmane.org \
    --cc=shemming-43mecJUBy8ZBDgjK7y7TUQ@public.gmane.org \
    --cc=stephen-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).