From mboxrd@z Thu Jan  1 00:00:00 1970
From: Ferruh Yigit <ferruh.yigit@intel.com>
Subject: Re: [PATCH v5 0/4] ethdev: add per-PMD tuning of RxTx
 parmeters
Date: Fri, 6 Apr 2018 18:01:46 +0100
Message-ID: <abb3bad7-5639-607f-0ae6-6ce3d4a18d64@intel.com>
References: <20180406145002.27480-1-remy.horton@intel.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 7bit
Cc: John McNamara <john.mcnamara@intel.com>, Wenzhuo Lu
 <wenzhuo.lu@intel.com>, Jingjing Wu <jingjing.wu@intel.com>,
 Qi Zhang <qi.z.zhang@intel.com>, Beilei Xing <beilei.xing@intel.com>,
 Shreyansh Jain <shreyansh.jain@nxp.com>,
 Thomas Monjalon <thomas@monjalon.net>
To: Remy Horton <remy.horton@intel.com>, dev@dpdk.org
Return-path: <dev-bounces@dpdk.org>
Received: from mga04.intel.com (mga04.intel.com [192.55.52.120])
 by dpdk.org (Postfix) with ESMTP id B06A91D078
 for <dev@dpdk.org>; Fri,  6 Apr 2018 19:01:50 +0200 (CEST)
In-Reply-To: <20180406145002.27480-1-remy.horton@intel.com>
Content-Language: en-US
List-Id: DPDK patches and discussions <dev.dpdk.org>
List-Unsubscribe: <https://dpdk.org/ml/options/dev>,
 <mailto:dev-request@dpdk.org?subject=unsubscribe>
List-Archive: <http://dpdk.org/ml/archives/dev/>
List-Post: <mailto:dev@dpdk.org>
List-Help: <mailto:dev-request@dpdk.org?subject=help>
List-Subscribe: <https://dpdk.org/ml/listinfo/dev>,
 <mailto:dev-request@dpdk.org?subject=subscribe>
Errors-To: dev-bounces@dpdk.org
Sender: "dev" <dev-bounces@dpdk.org>

On 4/6/2018 3:49 PM, Remy Horton wrote:
> The optimal values of several transmission & reception related parameters,
> such as burst sizes, descriptor ring sizes, and number of queues, varies
> between different network interface devices. This patchset allows individual
> PMDs to specify their preferred parameter values, and if so indicated by an
> application, for them to be used automatically by the ethdev layer.
> 
> rte_eth_dev_configure() has been changed so that specifying zero for both
> nb_rx_q AND nb_tx_q causes it to use driver preferred values, and if these
> are not available, falls back to EAL defaults. Setting one (but not both)
> to zero does not cause the use of defaults, as having one of them zeroed is
> a valid setup.
> 
> This patchset includes per-PMD values for e1000 and i40e but it is expected
> that subsequent patchsets will cover other PMDs. A deprecation notice
> covering the API/ABI change is in place.
> 
> Changes in v5:
> * uint_16_t corrected to uint16_t
> 
> Changes in v4:
> * Added API/ABI change documentation
> * Rebased to 78f5a2e93d74
> 
> Changes in v3:
> * Changed formatting around new rte_eth_dev_info fields
> * Added Doxygen documentation to struct rte_eth_dev_portconf
> * Testpmd "port config all burst 0" and --burst=0 uses PMD 
>   Rx burst recommendations.
> * Added to release notes
> * Rebased to 8ea081f38161
> 
> Changes in v2:
> * Rebased to master
> * Removed fallback values from rte_eth_dev_info_get()
> * Added fallback values to rte_rte_[rt]x_queue_setup()
> * Added fallback values to rte_eth_dev_configure()
> * Corrected comment
> * Removed deprecation notice
> * Split RX and Tx into seperate structures
> * Changed parameter names
> 
> 
> Remy Horton (4):
>   ethdev: add support for PMD-tuned Tx/Rx parameters
>   net/e1000: add TxRx tuning parameters
>   net/i40e: add TxRx tuning parameters
>   testpmd: make use of per-PMD TxRx parameters

For series,
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>