Environment
===========
DPDK version: e5176f23ae8b31437c3e5eb875c81f95bf3a9942 version: 25.03-rc1
OS: Ubuntu24.04.1 LTS (Noble Numbat)/6.8.0-41-generic
Compiler:  gcc version 13.2.0
Hardware platform: Intel(R) Xeon(R) Platinum 8380 CPU @ 2.30GHz
NIC hardware: Intel Corporation Ethernet Controller E810-C for SFP [8086:1593]
(rev 01)
NIC firmware: 
  driver: ice-1.16.3
  FW: 4.70 0x8001f7e2 1.3755.0

Test Setup
Steps to reproduce
==================
1. bind ports to dpdk  
./usertools/dpdk-devbind.py -b vfio-pci 0000:af:00.0
2. launch testpmd 
x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-3 -n 4 -a 0000:af:00.0 -- -i 
3. detach and attach ports
port stop all
port detach 0
port attach 0000:af:00.0
port stop all
4. config port rxq/txq 
port config all rxq 16
port config all txq 16  


Results: 
========
The status of the port is down, but it cannot be configured.
testpmd> port config all rxq 16
Please stop all ports first
testpmd> port config all txq 16
Please stop all ports first

Expected Result:
================
Can successfully configure rxq/txq after attaching the port.
testpmd> port config all rxq 16
testpmd> port config all txq 16

bad commit:
===========
commit 994635edb2c038e64617bcf2790a8cd326c3e8e0
Author: Huisong Li <lihuisong@huawei.com>
Date:   Mon Jan 20 14:42:18 2025 +0800

    app/testpmd: add port attach/detach for multiple process

    The port information needs to be updated due to attaching and detaching
    port. Currently, it is done in the same thread as removing or probing
    device, which doesn't satisfy the operation of attaching and detaching
    device in multiple process.

    If this operation is performed in one process, the other process can
    receive 'new' or 'destroy' event. So we can move updating port information
    to event callback to support attaching and detaching port in primary and
    secondary process.

    Note: the reason for adding an alarm callback in 'destroy' event is that
    the ethdev state is changed from 'ATTACHED' to 'UNUSED' only after the
    event callback finished. But the remove_invalid_ports() function removes
    invalid port only if ethdev state is 'UNUSED'. If we don't add alarm
    callback, this detached port information can not be removed.

    Signed-off-by: Huisong Li <lihuisong@huawei.com>
    Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
    Acked-by: Chengwen Feng <fengchengwen@huawei.com>

 app/test-pmd/testpmd.c | 68 +++++++++++++++++++++++++++++++++++++-------------
 1 file changed, 51 insertions, 17 deletions