* [PATCH] doc: arm64: document DPDK application profiling methods
From: Jerin Jacob @ 2016-10-04 10:40 UTC (permalink / raw)
To: dev; +Cc: thomas.monjalon, jianbo.liu, viktorin, Jerin Jacob
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
---
doc/guides/prog_guide/profile_app.rst | 58 +++++++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/doc/guides/prog_guide/profile_app.rst b/doc/guides/prog_guide/profile_app.rst
index 3226187..bb78623 100644
--- a/doc/guides/prog_guide/profile_app.rst
+++ b/doc/guides/prog_guide/profile_app.rst
@@ -31,6 +31,14 @@
Profile Your Application
========================
+Introduction
+------------
+
+The following sections describe the methods to profile DPDK applications on
+different architectures.
+
+x86
+~~~
Intel processors provide performance counters to monitor events.
Some tools provided by Intel can be used to profile and benchmark an application.
See the *VTune Performance Analyzer Essentials* publication from Intel Press for more information.
@@ -50,3 +58,53 @@ The main situations that should be monitored through event counters are:
Refer to the
`Intel Performance Analysis Guide <http://software.intel.com/sites/products/collateral/hpc/vtune/performance_analysis_guide.pdf>`_
for details about application profiling.
+
+ARM64
+~~~~~
+
+Perf
+^^^^
+ARM64 architecture provide performance counters to monitor events.
+The Linux perf tool can be used to profile and benchmark an application.
+In addition to the standard events, perf can be used to profile arm64 specific
+PMU events through raw events(-e -rXX)
+
+Refer to the
+`ARM64 specific PMU events enumeration <http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.100095_0002_04_en/way1382543438508.html>`_
+
+High-resolution cycle counter
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+The default cntvct_el0 based rte_rdtsc() provides portable means to get wall
+clock counter at user space. Typically it runs at <= 100MHz.
+
+The alternative method to enable rte_rdtsc() for high resolution
+wall clock counter is through armv8 PMU subsystem.
+The PMU cycle counter runs at CPU frequency, However, access to PMU cycle
+counter from user space is not enabled by default in the arm64 linux kernel.
+It is possible to enable cycle counter at user space access
+by configuring the PMU from the privileged mode (kernel space).
+
+by default rte_rdtsc() implementation uses portable cntvct_el0 scheme.
+Application can choose the PMU based implementation with
+CONFIG_RTE_ARM_EAL_RDTSC_USE_PMU
+
+The PMU based scheme useful for high accuracy performance profiling.
+Find below the example steps to configure the PMU based cycle counter on an
+armv8 machine.
+
+.. code-block:: console
+
+ git clone https://github.com/jerinjacobk/armv8_pmu_cycle_counter_el0
+ cd armv8_pmu_cycle_counter_el0
+ make
+ sudo insmod pmu_el0_cycle_counter.ko
+ cd $DPDK_DIR
+ make config T=arm64-armv8a-linuxapp-gcc
+ echo "CONFIG_RTE_ARM_EAL_RDTSC_USE_PMU=y" >> build/.config
+ make
+
+.. warning::
+
+ This method can not be used in production systems as this may alter PMU
+ state used by standard Linux user space tool like perf.
+
--
2.5.5
^ permalink raw reply related
* [PATCH v2] examples: fix ip_pipeline to load PMD driver correctly
From: Gowrishankar @ 2016-10-04 10:43 UTC (permalink / raw)
To: dev
Cc: Chao Zhu, Thomas Monjalon, Cristian Dumitrescu,
Christian Ehrhardt, Pradeep, Gowrishankar Muthukrishnan
In-Reply-To: <1474447127-7416-1-git-send-email-gowrishankar.m@linux.vnet.ibm.com>
From: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
v2: minor correction in patch to avoid space between -d option and driver path
Gowrishankar Muthukrishnan (1):
examples: fix ip_pipeline to load PMD driver correctly
examples/ip_pipeline/init.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--
1.9.1
^ permalink raw reply
* [PATCH v2] examples: fix ip_pipeline to load PMD driver correctly
From: Gowrishankar @ 2016-10-04 10:43 UTC (permalink / raw)
To: dev
Cc: Chao Zhu, Thomas Monjalon, Cristian Dumitrescu,
Christian Ehrhardt, Pradeep, Gowrishankar Muthukrishnan
In-Reply-To: <cover.1475577468.git.gowrishankar.m@linux.vnet.ibm.com>
From: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
There is typo in init.c of ip_pipeline example due to which,
invalid file path is added to -d option of EAL i.e path starting
with =.
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
---
examples/ip_pipeline/init.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/examples/ip_pipeline/init.c b/examples/ip_pipeline/init.c
index 0dbc332..d580ddf 100644
--- a/examples/ip_pipeline/init.c
+++ b/examples/ip_pipeline/init.c
@@ -236,7 +236,7 @@ app_init_eal(struct app_params *app)
}
if (p->add_driver) {
- snprintf(buffer, sizeof(buffer), "-d=%s", p->add_driver);
+ snprintf(buffer, sizeof(buffer), "-d%s", p->add_driver);
app->eal_argv[n_args++] = strdup(buffer);
}
--
1.9.1
^ permalink raw reply related
* Re: Proposal: enable redirection of DPDK logs from the user app
From: Olivier Matz @ 2016-10-04 11:26 UTC (permalink / raw)
To: Montorsi, Francesco, dev@dpdk.org
In-Reply-To: <32054c5dd466431ebf99d84641c6313a@bilemail1.empirix.com>
Hi Francesco,
On 10/04/2016 12:24 PM, Montorsi, Francesco wrote:
> Hi all,
> I've not been following closely latest DPDK activity but my company is using DPDK and we recently upgraded to 16.07.
> We apply several patches to DPDK sources, to make it more similar to a "standard library" (currently it is quite intrusive: calls abort() at will, writes its own log, etc etc)... I think that it may be useful to give back to the community some of these (small) "enhancements".
>
> One of them is about logging: as the application where we embed DPDK already has its log file, we want DPDK to log in our log facility framework.
> My "fix" is simple: I just put a callback function in RTE logging system that, by default, points to the existing rte_vlog() function. If needed the library user can provide its own callback function to do what he likes.
>
> The attached patch is what we use right now. I totally understand it needs some rework to put it in a better shape... but first of all: are you interested in such patch?
It seems the mailing list stripped your patch sent as attachment.
Can you please resend it again in the body of the mail?
I think we can already redirect logs to a file by using fopencookie() +
rte_openlog_stream(). Did you already check these functions?
Regards,
Olivier
^ permalink raw reply
* Re: [PATCH 1/2] mbuf: add rte_pktmbuff_reset_headroom function
From: Maxime Coquelin @ 2016-10-04 11:51 UTC (permalink / raw)
To: Olivier Matz, dev; +Cc: stephen, mst, yuanhan.liu
In-Reply-To: <8b1847c7-e1a7-7477-8937-1e49c3ec0a8f@6wind.com>
On 10/03/2016 06:11 PM, Olivier Matz wrote:
> Hi Maxime,
>
> On 09/29/2016 02:20 PM, Maxime Coquelin wrote:
>> Some application use rte_mbuf_raw_alloc() function to improve
>> performance by not resetting mbuf's fields to their default state.
>>
>> This can be however problematic for mbuf consumers that need some
>> headroom, meaning that data_off field gets decremented after
>> allocation. When the mbuf is re-used afterwards, there might not
>> be enough room for the consumer to prepend anything, if the data_off
>> field is not reset to its default value.
>>
>> This patch adds a new rte_pktmbuf_reset_headroom() function that
>> applications can call to reset the data_off field.
>> This patch also replaces current data_off affectations in the mbuf
>> lib with a call to this function.
>>
>> Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
>
> Sounds like a good idea. Just one small comment below.
>
>>
>> /**
>> + * Reset the data_off field of a packet mbuf to its default value.
>> + *
>> + * The given mbuf must have only one segment.
>> + *
>> + * @param m
>> + * The packet mbuf's data_off field has to be reset.
>> + */
>> +static inline void rte_pktmbuf_reset_headroom(struct rte_mbuf *m)
>> +{
>> + m->data_off = RTE_MIN(RTE_PKTMBUF_HEADROOM, (uint16_t)m->buf_len);
>> +}
>
> Maybe we should also highlight in the API comment that the segment
> should be empty.
Good point. I'll change to:
The given mbuf must have only one segment, which should be empty.
Thanks,
Maxime
^ permalink raw reply
* [PATCH v2 1/2] mbuf: add rte_pktmbuff_reset_headroom function
From: Maxime Coquelin @ 2016-10-04 12:05 UTC (permalink / raw)
To: olivier.matz, dev; +Cc: stephen, mst, yuanhan.liu, Maxime Coquelin
Some application use rte_mbuf_raw_alloc() function to improve
performance by not resetting mbuf's fields to their default state.
This can be however problematic for mbuf consumers that need some
headroom, meaning that data_off field gets decremented after
allocation. When the mbuf is re-used afterwards, there might not
be enough room for the consumer to prepend anything, if the data_off
field is not reset to its default value.
This patch adds a new rte_pktmbuf_reset_headroom() function that
applications can call to reset the data_off field.
This patch also replaces current data_off affectations in the mbuf
lib with a call to this function.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
---
Changes since v2:
=================
- Specify headroom may be reset only if segment is empty.
lib/librte_mbuf/rte_mbuf.h | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
index 23b7bf8..85a653c 100644
--- a/lib/librte_mbuf/rte_mbuf.h
+++ b/lib/librte_mbuf/rte_mbuf.h
@@ -1387,6 +1387,19 @@ rte_pktmbuf_priv_size(struct rte_mempool *mp)
}
/**
+ * Reset the data_off field of a packet mbuf to its default value.
+ *
+ * The given mbuf must have only one segment, which should be empty.
+ *
+ * @param m
+ * The packet mbuf's data_off field has to be reset.
+ */
+static inline void rte_pktmbuf_reset_headroom(struct rte_mbuf *m)
+{
+ m->data_off = RTE_MIN(RTE_PKTMBUF_HEADROOM, (uint16_t)m->buf_len);
+}
+
+/**
* Reset the fields of a packet mbuf to their default values.
*
* The given mbuf must have only one segment.
@@ -1406,8 +1419,7 @@ static inline void rte_pktmbuf_reset(struct rte_mbuf *m)
m->ol_flags = 0;
m->packet_type = 0;
- m->data_off = (RTE_PKTMBUF_HEADROOM <= m->buf_len) ?
- RTE_PKTMBUF_HEADROOM : m->buf_len;
+ rte_pktmbuf_reset_headroom(m);
m->data_len = 0;
__rte_mbuf_sanity_check(m, 1);
@@ -1571,7 +1583,7 @@ static inline void rte_pktmbuf_detach(struct rte_mbuf *m)
m->buf_addr = (char *)m + mbuf_size;
m->buf_physaddr = rte_mempool_virt2phy(mp, m) + mbuf_size;
m->buf_len = (uint16_t)buf_len;
- m->data_off = RTE_MIN(RTE_PKTMBUF_HEADROOM, (uint16_t)m->buf_len);
+ rte_pktmbuf_reset_headroom(m);
m->data_len = 0;
m->ol_flags = 0;
--
2.7.4
^ permalink raw reply related
* [PATCH v2 2/2] app/testpmd/txonly: Reset headroom after raw packet allocation
From: Maxime Coquelin @ 2016-10-04 12:05 UTC (permalink / raw)
To: olivier.matz, dev; +Cc: stephen, mst, yuanhan.liu, Maxime Coquelin
In-Reply-To: <1475582724-5202-1-git-send-email-maxime.coquelin@redhat.com>
This patch fixes txonly raw packets allocations by resetting the
available headroom.
Indeed, some PMDs such as Virtio might prepend some data to the
packet, resulting in mbuf's data_off field to be decremented each
time the mbuf gets re-allocated.
For Virtio PMD, it means that we use only single descriptors for the
first times mbufs get allocated, as at some point there is not
enough headroom to store the header.
Other alternative would be use standard API to allocate the packets,
which does reset the headroom, but the impact on performance is too
big to consider this an option.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
---
app/test-pmd/txonly.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/app/test-pmd/txonly.c b/app/test-pmd/txonly.c
index d2736b7..8513a06 100644
--- a/app/test-pmd/txonly.c
+++ b/app/test-pmd/txonly.c
@@ -222,6 +222,14 @@ pkt_burst_transmit(struct fwd_stream *fs)
return;
break;
}
+
+ /*
+ * Using raw alloc is good to improve performance,
+ * but some consumers may use the headroom and so
+ * decrement data_off. We need to make sure it is
+ * reset to default value.
+ */
+ rte_pktmbuf_reset_headroom(pkt);
pkt->data_len = tx_pkt_seg_lengths[0];
pkt_seg = pkt;
if (tx_pkt_split == TX_PKT_SPLIT_RND)
--
2.7.4
^ permalink raw reply related
* Re: Proposal: enable redirection of DPDK logs from the user app
From: Montorsi, Francesco @ 2016-10-04 12:28 UTC (permalink / raw)
To: Olivier Matz, dev@dpdk.org
In-Reply-To: <d84074d2-e6c3-2a29-679f-f0e97c34b698@6wind.com>
Hi Olivier,
> It seems the mailing list stripped your patch sent as attachment.
> Can you please resend it again in the body of the mail?
You're right sorry. It's attached at the end of this mail.
> I think we can already redirect logs to a file by using fopencookie() +
> rte_openlog_stream(). Did you already check these functions?
Yes, but to be honest, that seems a troublesome solution for something as easy as logging a string; e.g. by using fopencookie() approach, you don't have the concept of "log message", you just provide a function that must write a block of bytes somewhere. Typically instead, you need to know where a log message starts and ends, to e.g., add prefixes/postfixes to it.
Indeed, most of the C/C++ (open source) libraries have some simple hook that allows the user to have more control on logging... I think DPDK should be no exception... :)
Thanks,
Francesco
>From 52d4fdccee4de3787e85589ff8f666028ad9ea7b Mon Sep 17 00:00:00 2001
From: Francesco Montorsi <fmontorsi@empirix.com>
Date: Tue, 4 Oct 2016 12:08:34 +0200
Subject: [PATCH] Enable custom log sink implementations
---
lib/librte_eal/common/eal_common_log.c | 23 ++++++++++++++++++++---
lib/librte_eal/common/include/rte_log.h | 8 ++++++--
lib/librte_eal/linuxapp/eal/eal_debug.c | 16 ++++++++++++++--
lib/librte_eal/linuxapp/eal/rte_eal_version.map | 2 +-
4 files changed, 41 insertions(+), 8 deletions(-)
diff --git a/lib/librte_eal/common/eal_common_log.c b/lib/librte_eal/common/eal_common_log.c
index 967991a..5e86309 100644
--- a/lib/librte_eal/common/eal_common_log.c
+++ b/lib/librte_eal/common/eal_common_log.c
@@ -41,15 +41,25 @@
#include "eal_private.h"
+
+/* forward declaration */
+int
+rte_vlog_to_FILE(uint32_t level, uint32_t logtype, const char *formattedstr);
+
/* global log structure */
struct rte_logs rte_logs = {
.type = ~0,
.level = RTE_LOG_DEBUG,
.file = NULL,
+ .log_callback = rte_vlog_to_FILE
};
static FILE *default_log_stream;
+#define LOG_BUFFER_SIZE 4095
+static char log_buffer[LOG_BUFFER_SIZE+1];
+
+
/**
* This global structure stores some informations about the message
* that is currently beeing processed by one lcore
@@ -123,7 +133,7 @@ int rte_log_cur_msg_logtype(void)
* defined by the previous call to rte_openlog_stream().
*/
int
-rte_vlog(uint32_t level, uint32_t logtype, const char *format, va_list ap)
+rte_vlog_to_FILE(uint32_t level, uint32_t logtype, const char *formattedstr)
{
int ret;
FILE *f = rte_logs.file;
@@ -135,11 +145,16 @@ rte_vlog(uint32_t level, uint32_t logtype, const char *format, va_list ap)
RTE_PER_LCORE(log_cur_msg).loglevel = level;
RTE_PER_LCORE(log_cur_msg).logtype = logtype;
- ret = vfprintf(f, format, ap);
+ ret = fprintf(f, "%s", formattedstr);
fflush(f);
return ret;
}
+void rte_set_custom_vlog(rte_vlog_func_t callback)
+{
+ rte_logs.log_callback = callback;
+}
+
/*
* Generates a log message The message will be sent in the stream
* defined by the previous call to rte_openlog_stream().
@@ -152,8 +167,10 @@ rte_log(uint32_t level, uint32_t logtype, const char *format, ...)
int ret;
va_start(ap, format);
- ret = rte_vlog(level, logtype, format, ap);
+ vsnprintf(log_buffer, LOG_BUFFER_SIZE, format, ap);
va_end(ap);
+
+ ret = rte_logs.log_callback(level, logtype, log_buffer);
return ret;
}
diff --git a/lib/librte_eal/common/include/rte_log.h b/lib/librte_eal/common/include/rte_log.h
index 919563c..3dcb135 100644
--- a/lib/librte_eal/common/include/rte_log.h
+++ b/lib/librte_eal/common/include/rte_log.h
@@ -50,11 +50,15 @@ extern "C" {
#include <stdio.h>
#include <stdarg.h>
+/** The backend used for logging. Can be user-defined. */
+typedef int (*rte_vlog_func_t)(uint32_t level, uint32_t logtype, const char *formattedstr);
+
/** The rte_log structure. */
struct rte_logs {
uint32_t type; /**< Bitfield with enabled logs. */
uint32_t level; /**< Log level. */
FILE *file; /**< Pointer to current FILE* for logs. */
+ rte_vlog_func_t log_callback;
};
/** Global log informations */
@@ -236,8 +240,8 @@ int rte_log(uint32_t level, uint32_t logtype, const char *format, ...)
* - 0: Success.
* - Negative on error.
*/
-int rte_vlog(uint32_t level, uint32_t logtype, const char *format, va_list ap)
- __attribute__((format(printf,3,0)));
+void rte_set_custom_vlog(rte_vlog_func_t callback);
+
/**
* Generates a log message.
diff --git a/lib/librte_eal/linuxapp/eal/eal_debug.c b/lib/librte_eal/linuxapp/eal/eal_debug.c
index 5fbc17c..f411d96 100644
--- a/lib/librte_eal/linuxapp/eal/eal_debug.c
+++ b/lib/librte_eal/linuxapp/eal/eal_debug.c
@@ -78,9 +78,16 @@ void __rte_panic(const char *funcname, const char *format, ...)
va_list ap;
rte_log(RTE_LOG_CRIT, RTE_LOGTYPE_EAL, "PANIC in %s():\n", funcname);
+
+#define LOG_BUFFER_SIZE 4095
+static char log_buffer[LOG_BUFFER_SIZE+1];
+
va_start(ap, format);
- rte_vlog(RTE_LOG_CRIT, RTE_LOGTYPE_EAL, format, ap);
+ vsnprintf(log_buffer, LOG_BUFFER_SIZE, format, ap);
va_end(ap);
+
+ rte_logs.log_callback(RTE_LOG_CRIT, RTE_LOGTYPE_EAL, log_buffer);
+
rte_dump_stack();
rte_dump_registers();
abort();
@@ -99,10 +106,15 @@ rte_exit(int exit_code, const char *format, ...)
RTE_LOG(CRIT, EAL, "Error - exiting with code: %d\n"
" Cause: ", exit_code);
+#define LOG_BUFFER_SIZE 4095
+static char log_buffer[LOG_BUFFER_SIZE+1];
+
va_start(ap, format);
- rte_vlog(RTE_LOG_CRIT, RTE_LOGTYPE_EAL, format, ap);
+ vsnprintf(log_buffer, LOG_BUFFER_SIZE, format, ap);
va_end(ap);
+ rte_logs.log_callback(RTE_LOG_CRIT, RTE_LOGTYPE_EAL, log_buffer);
+
#ifndef RTE_EAL_ALWAYS_PANIC_ON_ERROR
exit(exit_code);
#else
diff --git a/lib/librte_eal/linuxapp/eal/rte_eal_version.map b/lib/librte_eal/linuxapp/eal/rte_eal_version.map
index 83721ba..b35c8c3 100644
--- a/lib/librte_eal/linuxapp/eal/rte_eal_version.map
+++ b/lib/librte_eal/linuxapp/eal/rte_eal_version.map
@@ -94,6 +94,7 @@ DPDK_2.0 {
rte_openlog_stream;
rte_realloc;
rte_set_application_usage_hook;
+ rte_set_custom_vlog;
rte_set_log_level;
rte_set_log_type;
rte_socket_id;
@@ -102,7 +103,6 @@ DPDK_2.0 {
rte_sys_gettid;
rte_thread_get_affinity;
rte_thread_set_affinity;
- rte_vlog;
rte_xen_dom0_memory_attach;
rte_xen_dom0_memory_init;
rte_zmalloc;
--
2.7.4
^ permalink raw reply related
* Re: [PATCH] doc: arm64: document DPDK application profiling methods
From: Thomas Monjalon @ 2016-10-04 12:40 UTC (permalink / raw)
To: Jerin Jacob; +Cc: dev, jianbo.liu, viktorin
In-Reply-To: <1475577630-14318-1-git-send-email-jerin.jacob@caviumnetworks.com>
Thanks for providing a patch so quickly :)
2016-10-04 16:10, Jerin Jacob:
> +The PMU based scheme useful for high accuracy performance profiling.
A verb is missing.
> +Find below the example steps to configure the PMU based cycle counter on an
> +armv8 machine.
> +
> +.. code-block:: console
> +
> + git clone https://github.com/jerinjacobk/armv8_pmu_cycle_counter_el0
> + cd armv8_pmu_cycle_counter_el0
> + make
> + sudo insmod pmu_el0_cycle_counter.ko
> + cd $DPDK_DIR
> + make config T=arm64-armv8a-linuxapp-gcc
> + echo "CONFIG_RTE_ARM_EAL_RDTSC_USE_PMU=y" >> build/.config
> + make
What about the ARM 32 code that Jan is using?
> +.. warning::
> +
> + This method can not be used in production systems as this may alter PMU
> + state used by standard Linux user space tool like perf.
More details please?
^ permalink raw reply
* Re: [PATCH] doc: arm64: document DPDK application profiling methods
From: Jan Viktorin @ 2016-10-04 12:45 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: Jerin Jacob, dev, jianbo.liu
In-Reply-To: <1570506.0gxVEm9dQ5@xps13>
On Tue, 04 Oct 2016 14:40:47 +0200
Thomas Monjalon <thomas.monjalon@6wind.com> wrote:
> Thanks for providing a patch so quickly :)
>
> 2016-10-04 16:10, Jerin Jacob:
> > +The PMU based scheme useful for high accuracy performance profiling.
>
> A verb is missing.
>
> > +Find below the example steps to configure the PMU based cycle counter on an
> > +armv8 machine.
> > +
> > +.. code-block:: console
> > +
> > + git clone https://github.com/jerinjacobk/armv8_pmu_cycle_counter_el0
> > + cd armv8_pmu_cycle_counter_el0
> > + make
> > + sudo insmod pmu_el0_cycle_counter.ko
> > + cd $DPDK_DIR
> > + make config T=arm64-armv8a-linuxapp-gcc
> > + echo "CONFIG_RTE_ARM_EAL_RDTSC_USE_PMU=y" >> build/.config
> > + make
>
> What about the ARM 32 code that Jan is using?
Hi, I didn't have time for this yet. The basic description is here:
lib/librte_eal/common/include/arch/arm/rte_cycles_32.h
In the Linux Kernel, it is used here:
arch/arm/kernel/perf_event_v7.c (see registers c12, c13 and c14)
Regards
Jan
>
> > +.. warning::
> > +
> > + This method can not be used in production systems as this may alter PMU
> > + state used by standard Linux user space tool like perf.
>
> More details please?
>
--
Jan Viktorin E-mail: Viktorin@RehiveTech.com
System Architect Web: www.RehiveTech.com
RehiveTech
Brno, Czech Republic
^ permalink raw reply
* Re: [PATCH 1/1] eal: Don't fail secondary if primary is missing tailqs
From: Sergio Gonzalez Monroy @ 2016-10-04 13:11 UTC (permalink / raw)
To: jean.tourrilhes, dev, David Marchand
In-Reply-To: <20160922211728.GA3124@labs.hpe.com>
Hi Jean,
As with your other patch, commit title needs fixing and also missing
Signed-off-by line.
On 22/09/2016 22:17, Jean Tourrilhes wrote:
> lib/librte_eal/common/eal_common_tailqs.c | 15 ++++++++++++---
> 1 file changed, 12 insertions(+), 3 deletions(-)
>
> diff --git a/lib/librte_eal/common/eal_common_tailqs.c b/lib/librte_eal/common/eal_common_tailqs.c
> index bb08ec8..6960d06 100644
> --- a/lib/librte_eal/common/eal_common_tailqs.c
> +++ b/lib/librte_eal/common/eal_common_tailqs.c
> @@ -143,6 +143,8 @@ rte_eal_tailq_update(struct rte_tailq_elem *t)
> t->head = rte_eal_tailq_create(t->name);
> } else {
> t->head = rte_eal_tailq_lookup(t->name);
> + if (t->head != NULL)
> + rte_tailqs_count++;
> }
> }
>
> @@ -188,9 +190,16 @@ rte_eal_tailqs_init(void)
> if (t->head == NULL) {
> RTE_LOG(ERR, EAL,
> "Cannot initialize tailq: %s\n", t->name);
> - /* no need to TAILQ_REMOVE, we are going to panic in
> - * rte_eal_init() */
> - goto fail;
> + if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
> + /* no need to TAILQ_REMOVE, we are going
> + * to panic in rte_eal_init() */
> + goto fail;
> + } else {
> + /* This means our list of constructor is
> + * no the same as primary. Just remove
> + * that missing tailq and continue */
> + TAILQ_REMOVE(&rte_tailq_elem_head, t, next);
> + }
> }
> }
>
I might be missing something here so bear with me.
The case you are trying to fix is, as an example, when your secondary
app is using LPM but your primary is not.
So basically with this patch, you are removing the tailq for LPM on
secondary and continuing as normal, is that the case?
I am not convinced about this approach.
I guess the assumption here is that all the TAILQ infrastructure works
even when the tailq list itself is NULL?
I say assumption because I don't have an easy way to trigger this use
case with default DPDK sample/test apps.
What about letting the secondary process create a tailq if it doesn't
exists?
We would need to lock protect at least the register function to avoid
race conditions when having multiple secondary processes.
David, what do you think?
Sergio
^ permalink raw reply
* [PATCH v6 0/4] new crypto software based device
From: Slawomir Mrozowicz @ 2016-10-04 15:11 UTC (permalink / raw)
To: dev; +Cc: Slawomir Mrozowicz
In-Reply-To: <1475504792-31557-1-git-send-email-slawomirx.mrozowicz@intel.com>
This code provides the initial implementation of the libcrypto poll mode driver.
All cryptography operations are using Openssl library crypto API.
Each algorithm uses EVP_ interface from openssl API - which is recommended by
Openssl maintainers.
For more information about how to use this driver, go to:
doc/guides/cryptodevs/libcrypto.rst
Changes in V6:
- fix checkpatch warnings
Changes in V5:
- reduce source of big data test
Changes in V4:
- move aes test rework to another patch
- move big data test to another patch
- checking if libcrypto pmd is available
Changes in V3:
- add nagative verification tests
- add big data test
- fix pmd according to negative verification tests
- change gmac aad max size
- update documentation and commits comments
Changes in V2:
- add gcm/gmac algorithm correction
- unit test rework
Slawomir Mrozowicz (1):
libcrypto_pmd: initial implementation of SW crypto device
Piotr Azarewicz (2)
app/test: cryptodev AES tests rework
app/test: added tests for libcrypto PMD
Daniel Mrzyglod (1)
examples/l2fwd-crypto: updated example for libcrypto PMD
MAINTAINERS | 4 +
app/test/Makefile | 2 +-
app/test/test_cryptodev.c | 1584 ++++++++++++++++++--
app/test/test_cryptodev.h | 1 +
app/test/test_cryptodev_aes.c | 687 ---------
app/test/test_cryptodev_aes.h | 1124 --------------
app/test/test_cryptodev_aes_test_vectors.h | 1097 ++++++++++++++
app/test/test_cryptodev_blockcipher.c | 538 +++++++
app/test/test_cryptodev_blockcipher.h | 125 ++
app/test/test_cryptodev_des_test_vectors.h | 955 ++++++++++++
app/test/test_cryptodev_gcm_test_vectors.h | 36 +-
app/test/test_cryptodev_hash_test_vectors.h | 491 ++++++
app/test/test_cryptodev_perf.c | 712 ++++++++-
config/common_base | 6 +
doc/guides/cryptodevs/index.rst | 1 +
doc/guides/cryptodevs/libcrypto.rst | 116 ++
doc/guides/rel_notes/release_16_11.rst | 23 +-
drivers/crypto/Makefile | 1 +
drivers/crypto/libcrypto/Makefile | 60 +
drivers/crypto/libcrypto/rte_libcrypto_pmd.c | 1062 +++++++++++++
drivers/crypto/libcrypto/rte_libcrypto_pmd_ops.c | 708 +++++++++
.../crypto/libcrypto/rte_libcrypto_pmd_private.h | 174 +++
.../crypto/libcrypto/rte_pmd_libcrypto_version.map | 3 +
examples/l2fwd-crypto/main.c | 9 +
lib/librte_cryptodev/rte_cryptodev.h | 5 +-
mk/rte.app.mk | 23 +-
26 files changed, 7621 insertions(+), 1926 deletions(-)
delete mode 100644 app/test/test_cryptodev_aes.c
delete mode 100644 app/test/test_cryptodev_aes.h
create mode 100644 app/test/test_cryptodev_aes_test_vectors.h
create mode 100644 app/test/test_cryptodev_blockcipher.c
create mode 100644 app/test/test_cryptodev_blockcipher.h
create mode 100644 app/test/test_cryptodev_des_test_vectors.h
create mode 100644 app/test/test_cryptodev_hash_test_vectors.h
create mode 100644 doc/guides/cryptodevs/libcrypto.rst
create mode 100644 drivers/crypto/libcrypto/Makefile
create mode 100644 drivers/crypto/libcrypto/rte_libcrypto_pmd.c
create mode 100644 drivers/crypto/libcrypto/rte_libcrypto_pmd_ops.c
create mode 100644 drivers/crypto/libcrypto/rte_libcrypto_pmd_private.h
create mode 100644 drivers/crypto/libcrypto/rte_pmd_libcrypto_version.map
--
2.5.0
^ permalink raw reply
* [PATCH v6 1/4] libcrypto_pmd: initial implementation of SW crypto device
From: Slawomir Mrozowicz @ 2016-10-04 15:11 UTC (permalink / raw)
To: dev; +Cc: Slawomir Mrozowicz, Michal Kobylinski, Tomasz Kulasek,
Daniel Mrzyglod
In-Reply-To: <1475593882-32364-1-git-send-email-slawomirx.mrozowicz@intel.com>
This code provides the initial implementation of the libcrypto
poll mode driver. All cryptography operations are using Openssl
library crypto API. Each algorithm uses EVP_ interface from
openssl API - which is recommended by Openssl maintainers.
This patch adds libcrypto poll mode driver support to librte_cryptodev
library.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
---
v2:
- add gcm crypto cipher and authentication algorithm
- rework gmac crypto authentication algorithm
v3:
- fix pmd according to negative verification tests
- change gmac aad max size
- update documentation
v6:
- fix checkpatch warnings
---
MAINTAINERS | 4 +
config/common_base | 6 +
doc/guides/cryptodevs/index.rst | 1 +
doc/guides/cryptodevs/libcrypto.rst | 116 +++
doc/guides/rel_notes/release_16_11.rst | 23 +-
drivers/crypto/Makefile | 1 +
drivers/crypto/libcrypto/Makefile | 60 ++
drivers/crypto/libcrypto/rte_libcrypto_pmd.c | 1062 ++++++++++++++++++++
drivers/crypto/libcrypto/rte_libcrypto_pmd_ops.c | 708 +++++++++++++
.../crypto/libcrypto/rte_libcrypto_pmd_private.h | 174 ++++
.../crypto/libcrypto/rte_pmd_libcrypto_version.map | 3 +
lib/librte_cryptodev/rte_cryptodev.h | 5 +-
mk/rte.app.mk | 23 +-
13 files changed, 2173 insertions(+), 13 deletions(-)
create mode 100644 doc/guides/cryptodevs/libcrypto.rst
create mode 100644 drivers/crypto/libcrypto/Makefile
create mode 100644 drivers/crypto/libcrypto/rte_libcrypto_pmd.c
create mode 100644 drivers/crypto/libcrypto/rte_libcrypto_pmd_ops.c
create mode 100644 drivers/crypto/libcrypto/rte_libcrypto_pmd_private.h
create mode 100644 drivers/crypto/libcrypto/rte_pmd_libcrypto_version.map
diff --git a/MAINTAINERS b/MAINTAINERS
index 58a10b8..1e9d1f8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -439,6 +439,10 @@ M: Declan Doherty <declan.doherty@intel.com>
F: drivers/crypto/null/
F: doc/guides/cryptodevs/null.rst
+LibCrypto Crypto PMD
+M: Declan Doherty <declan.doherty@intel.com>
+F: drivers/crypto/libcrypto/
+F: doc/guides/cryptodevs/libcrypto.rst
Packet processing
-----------------
diff --git a/config/common_base b/config/common_base
index 3a412ee..87b8646 100644
--- a/config/common_base
+++ b/config/common_base
@@ -376,6 +376,12 @@ CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n
#
+# Compile PMD for Software backed device
+#
+CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO=n
+CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO_DEBUG=n
+
+#
# Compile PMD for AESNI GCM device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
diff --git a/doc/guides/cryptodevs/index.rst b/doc/guides/cryptodevs/index.rst
index 906f1b4..bae8e53 100644
--- a/doc/guides/cryptodevs/index.rst
+++ b/doc/guides/cryptodevs/index.rst
@@ -39,6 +39,7 @@ Crypto Device Drivers
aesni_mb
aesni_gcm
kasumi
+ libcrypto
null
snow3g
qat
diff --git a/doc/guides/cryptodevs/libcrypto.rst b/doc/guides/cryptodevs/libcrypto.rst
new file mode 100644
index 0000000..77eff95
--- /dev/null
+++ b/doc/guides/cryptodevs/libcrypto.rst
@@ -0,0 +1,116 @@
+.. BSD LICENSE
+ Copyright(c) 2016 Intel Corporation. All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+LibCrypto Crypto Poll Mode Driver
+
+This code provides the initial implementation of the libcrypto poll mode
+driver. All cryptography operations are using Openssl library crypto API.
+Each algorithm uses EVP_ interface from openssl API - which is recommended
+by Openssl maintainers.
+
+For more details about openssl library please visit openssl webpage:
+https://www.openssl.org/
+
+Features
+--------
+
+LibCrypto PMD has support for:
+
+Supported cipher algorithms:
+* ``RTE_CRYPTO_CIPHER_3DES_CBC``
+* ``RTE_CRYPTO_CIPHER_AES_CBC``
+* ``RTE_CRYPTO_CIPHER_AES_CTR``
+* ``RTE_CRYPTO_CIPHER_3DES_CTR``
+* ``RTE_CRYPTO_CIPHER_AES_GCM``
+
+Supported authentication algorithms:
+* ``RTE_CRYPTO_AUTH_AES_GMAC``
+* ``RTE_CRYPTO_AUTH_MD5``
+* ``RTE_CRYPTO_AUTH_SHA1``
+* ``RTE_CRYPTO_AUTH_SHA224``
+* ``RTE_CRYPTO_AUTH_SHA256``
+* ``RTE_CRYPTO_AUTH_SHA384``
+* ``RTE_CRYPTO_AUTH_SHA512``
+* ``RTE_CRYPTO_AUTH_MD5_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA1_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA224_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA256_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA384_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA512_HMAC``
+
+
+Installation
+------------
+
+To compile libcrypto PMD, it has to be enabled in the config/common_base file
+and appropriate openssl packages have to be installed in the build environment.
+
+The newest openssl library version is supported:
+* 1.0.2h-fips 3 May 2016.
+Older versions that were also verified:
+* 1.0.1f 6 Jan 2014
+* 1.0.1 14 Mar 2012
+
+For Ubuntu 14.04 LTS these packages have to be installed in the build system:
+sudo apt-get install openssl
+sudo apt-get install libc6-dev-i386 (for i686-native-linuxapp-gcc target)
+
+This code was also verified on Fedora 24.
+This code was NOT yet verified on FreeBSD.
+
+Initialization
+--------------
+
+User can use app/test application to check how to use this pmd and to verify
+crypto processing.
+
+Test name is cryptodev_libcrypto_autotest.
+For performance test cryptodev_libcrypto_perftest can be used.
+
+To verify real traffic l2fwd-crypto example can be used with this command:
+
+.. code-block:: console
+
+sudo ./build/l2fwd-crypto -c 0x3 -n 4 --vdev "cryptodev_libcrypto_pmd"
+--vdev "cryptodev_libcrypto_pmd"-- -p 0x3 --chain CIPHER_HASH
+--cipher_op ENCRYPT --cipher_algo AES_CBC
+--cipher_key 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f
+--iv 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:ff
+--auth_op GENERATE --auth_algo SHA1_HMAC
+--auth_key 11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11
+:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11
+:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11
+
+Limitations
+-----------
+
+* Maximum number of sessions is 2048.
+* Chained mbufs are not supported.
+* Hash only is not supported for GCM and GMAC.
+* Cipher only is not supported for GCM and GMAC.
diff --git a/doc/guides/rel_notes/release_16_11.rst b/doc/guides/rel_notes/release_16_11.rst
index cc507a9..6e92966 100644
--- a/doc/guides/rel_notes/release_16_11.rst
+++ b/doc/guides/rel_notes/release_16_11.rst
@@ -34,7 +34,28 @@ New Features
Refer to the previous release notes for examples.
- This section is a comment. Make sure to start the actual text at the margin.
+* **Added libcrypto PMD.**
+
+ A new crypto PMD has been added, which provides several ciphering and hashing.
+ All cryptography operations are using Openssl library crypto API.
+
+* ** Added support of C3xxx Device in QAT PMD.**
+ Support for Device c3xxx has been enabled in QAT PMD.
+
+* ** Added support of C62XX Device in QAT PMD.**
+ Support for Device c62xx has been enabled in QAT PMD.
+
+
+* **Updated the QAT PMD.**
+ The QAT PMD was updated with changes including the following:
+
+ * Added support for MD5_HMAC algorithm.
+ * Added support for SHA224-HMAC algorithm.
+ * Added support for SHA384-HMAC algorithm.
+ * Added support for NULL algorithm.
+ * Added support for KASUMI (F8 and F9) algorithm.
+ * Added support for GMAC algorithm.
+ * Added support for 3DES block cipher algorithm.
* ** Added support of C3xxx Device in QAT PMD.**
Support for Device c3xxx has been enabled in QAT PMD.
diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
index 17d74fc..b452ea6 100644
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
@@ -33,6 +33,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
DIRS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_GCM) += aesni_gcm
DIRS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB) += aesni_mb
+DIRS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += libcrypto
DIRS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat
DIRS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G) += snow3g
DIRS-$(CONFIG_RTE_LIBRTE_PMD_KASUMI) += kasumi
diff --git a/drivers/crypto/libcrypto/Makefile b/drivers/crypto/libcrypto/Makefile
new file mode 100644
index 0000000..c5f8cf2
--- /dev/null
+++ b/drivers/crypto/libcrypto/Makefile
@@ -0,0 +1,60 @@
+# BSD LICENSE
+#
+# Copyright(c) 2016 Intel Corporation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# library name
+LIB = librte_pmd_libcrypto.a
+
+# build flags
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+
+# library version
+LIBABIVER := 1
+
+# versioning export map
+EXPORT_MAP := rte_pmd_libcrypto_version.map
+
+# external library dependencies
+LDLIBS += -lcrypto
+
+# library source files
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += rte_libcrypto_pmd.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += rte_libcrypto_pmd_ops.c
+
+# library dependencies
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += lib/librte_mbuf
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += lib/librte_mempool
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += lib/librte_ring
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += lib/librte_cryptodev
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/crypto/libcrypto/rte_libcrypto_pmd.c b/drivers/crypto/libcrypto/rte_libcrypto_pmd.c
new file mode 100644
index 0000000..4997a45
--- /dev/null
+++ b/drivers/crypto/libcrypto/rte_libcrypto_pmd.c
@@ -0,0 +1,1062 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_common.h>
+#include <rte_hexdump.h>
+#include <rte_cryptodev.h>
+#include <rte_cryptodev_pmd.h>
+#include <rte_dev.h>
+#include <rte_malloc.h>
+#include <rte_cpuflags.h>
+
+#include <openssl/evp.h>
+
+#include "rte_libcrypto_pmd_private.h"
+
+static int cryptodev_libcrypto_uninit(const char *name);
+
+/*----------------------------------------------------------------------------*/
+
+/**
+ * Global static parameter used to create a unique name for each
+ * LIBCRYPTO crypto device.
+ */
+static unsigned int unique_name_id;
+
+static inline int
+create_unique_device_name(char *name, size_t size)
+{
+ int ret;
+
+ if (name == NULL)
+ return -EINVAL;
+
+ ret = snprintf(name, size, "%s_%u",
+ RTE_STR(CRYPTODEV_NAME_LIBCRYPTO_PMD),
+ unique_name_id++);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+/**
+ * Increment counter by 1
+ * Counter is 64 bit array, big-endian
+ */
+static void
+ctr_inc(uint8_t *ctr)
+{
+ uint64_t *ctr64 = (uint64_t *)ctr;
+
+ *ctr64 = __builtin_bswap64(*ctr64);
+ (*ctr64)++;
+ *ctr64 = __builtin_bswap64(*ctr64);
+}
+
+/*
+ *------------------------------------------------------------------------------
+ * Session Prepare
+ *------------------------------------------------------------------------------
+ */
+
+/** Get xform chain order */
+static enum libcrypto_chain_order
+libcrypto_get_chain_order(const struct rte_crypto_sym_xform *xform)
+{
+ enum libcrypto_chain_order res = LIBCRYPTO_CHAIN_NOT_SUPPORTED;
+
+ if (xform != NULL) {
+ if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH) {
+ if (xform->next == NULL)
+ res = LIBCRYPTO_CHAIN_ONLY_AUTH;
+ else if (xform->next->type ==
+ RTE_CRYPTO_SYM_XFORM_CIPHER)
+ res = LIBCRYPTO_CHAIN_AUTH_CIPHER;
+ }
+ if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER) {
+ if (xform->next == NULL)
+ res = LIBCRYPTO_CHAIN_ONLY_CIPHER;
+ else if (xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH)
+ res = LIBCRYPTO_CHAIN_CIPHER_AUTH;
+ }
+ }
+
+ return res;
+}
+
+/** Get session cipher key from input cipher key */
+static void
+get_cipher_key(uint8_t *input_key, int keylen, uint8_t *session_key)
+{
+ memcpy(session_key, input_key, keylen);
+}
+
+/** Get key ede 24 bytes standard from input key */
+static int
+get_cipher_key_ede(uint8_t *key, int keylen, uint8_t *key_ede)
+{
+ int res = 0;
+
+ /* Initialize keys - 24 bytes: [key1-key2-key3] */
+ switch (keylen) {
+ case 24:
+ memcpy(key_ede, key, 24);
+ break;
+ case 16:
+ /* K3 = K1 */
+ memcpy(key_ede, key, 16);
+ memcpy(key_ede + 16, key, 8);
+ break;
+ case 8:
+ /* K1 = K2 = K3 (DES compatibility) */
+ memcpy(key_ede, key, 8);
+ memcpy(key_ede + 8, key, 8);
+ memcpy(key_ede + 16, key, 8);
+ break;
+ default:
+ LIBCRYPTO_LOG_ERR("Unsupported key size");
+ res = -EINVAL;
+ }
+
+ return res;
+}
+
+/** Get adequate libcrypto function for input cipher algorithm */
+static uint8_t
+get_cipher_algo(enum rte_crypto_cipher_algorithm sess_algo, size_t keylen,
+ const EVP_CIPHER **algo)
+{
+ int res = 0;
+
+ if (algo != NULL) {
+ switch (sess_algo) {
+ case RTE_CRYPTO_CIPHER_3DES_CBC:
+ switch (keylen) {
+ case 16:
+ *algo = EVP_des_ede_cbc();
+ break;
+ case 24:
+ *algo = EVP_des_ede3_cbc();
+ break;
+ default:
+ res = -EINVAL;
+ }
+ break;
+ case RTE_CRYPTO_CIPHER_3DES_CTR:
+ break;
+ case RTE_CRYPTO_CIPHER_AES_CBC:
+ switch (keylen) {
+ case 16:
+ *algo = EVP_aes_128_cbc();
+ break;
+ case 24:
+ *algo = EVP_aes_192_cbc();
+ break;
+ case 32:
+ *algo = EVP_aes_256_cbc();
+ break;
+ default:
+ res = -EINVAL;
+ }
+ break;
+ case RTE_CRYPTO_CIPHER_AES_CTR:
+ switch (keylen) {
+ case 16:
+ *algo = EVP_aes_128_ctr();
+ break;
+ case 24:
+ *algo = EVP_aes_192_ctr();
+ break;
+ case 32:
+ *algo = EVP_aes_256_ctr();
+ break;
+ default:
+ res = -EINVAL;
+ }
+ break;
+ case RTE_CRYPTO_CIPHER_AES_GCM:
+ switch (keylen) {
+ case 16:
+ *algo = EVP_aes_128_gcm();
+ break;
+ case 24:
+ *algo = EVP_aes_192_gcm();
+ break;
+ case 32:
+ *algo = EVP_aes_256_gcm();
+ break;
+ default:
+ res = -EINVAL;
+ }
+ break;
+ default:
+ res = -EINVAL;
+ break;
+ }
+ } else {
+ res = -EINVAL;
+ }
+
+ return res;
+}
+
+/** Get adequate libcrypto function for input auth algorithm */
+static uint8_t
+get_auth_algo(enum rte_crypto_auth_algorithm sessalgo,
+ const EVP_MD **algo)
+{
+ int res = 0;
+
+ if (algo != NULL) {
+ switch (sessalgo) {
+ case RTE_CRYPTO_AUTH_MD5:
+ case RTE_CRYPTO_AUTH_MD5_HMAC:
+ *algo = EVP_md5();
+ break;
+ case RTE_CRYPTO_AUTH_SHA1:
+ case RTE_CRYPTO_AUTH_SHA1_HMAC:
+ *algo = EVP_sha1();
+ break;
+ case RTE_CRYPTO_AUTH_SHA224:
+ case RTE_CRYPTO_AUTH_SHA224_HMAC:
+ *algo = EVP_sha224();
+ break;
+ case RTE_CRYPTO_AUTH_SHA256:
+ case RTE_CRYPTO_AUTH_SHA256_HMAC:
+ *algo = EVP_sha256();
+ break;
+ case RTE_CRYPTO_AUTH_SHA384:
+ case RTE_CRYPTO_AUTH_SHA384_HMAC:
+ *algo = EVP_sha384();
+ break;
+ case RTE_CRYPTO_AUTH_SHA512:
+ case RTE_CRYPTO_AUTH_SHA512_HMAC:
+ *algo = EVP_sha512();
+ break;
+ default:
+ res = -EINVAL;
+ break;
+ }
+ } else {
+ res = -EINVAL;
+ }
+
+ return res;
+}
+
+/** Set session cipher parameters */
+static int
+libcrypto_set_session_cipher_parameters(struct libcrypto_session *sess,
+ const struct rte_crypto_sym_xform *xform)
+{
+ /* Select cipher direction */
+ sess->cipher.direction = xform->cipher.op;
+ /* Select cipher key */
+ sess->cipher.key.length = xform->cipher.key.length;
+
+ /* Select cipher algo */
+ switch (xform->cipher.algo) {
+ case RTE_CRYPTO_CIPHER_3DES_CBC:
+ case RTE_CRYPTO_CIPHER_AES_CBC:
+ case RTE_CRYPTO_CIPHER_AES_CTR:
+ case RTE_CRYPTO_CIPHER_AES_GCM:
+ sess->cipher.mode = LIBCRYPTO_CIPHER_LIB;
+ sess->cipher.algo = xform->cipher.algo;
+ sess->cipher.ctx = EVP_CIPHER_CTX_new();
+
+ if (get_cipher_algo(sess->cipher.algo, sess->cipher.key.length,
+ &sess->cipher.evp_algo) != 0)
+ return -EINVAL;
+
+ get_cipher_key(xform->cipher.key.data, sess->cipher.key.length,
+ sess->cipher.key.data);
+
+ break;
+
+ case RTE_CRYPTO_CIPHER_3DES_CTR:
+ sess->cipher.mode = LIBCRYPTO_CIPHER_DES3CTR;
+ sess->cipher.ctx = EVP_CIPHER_CTX_new();
+
+ if (get_cipher_key_ede(xform->cipher.key.data,
+ sess->cipher.key.length,
+ sess->cipher.key.data) != 0)
+ return -EINVAL;
+ break;
+
+ default:
+ sess->cipher.algo = RTE_CRYPTO_CIPHER_NULL;
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* Set session auth parameters */
+static int
+libcrypto_set_session_auth_parameters(struct libcrypto_session *sess,
+ const struct rte_crypto_sym_xform *xform)
+{
+ /* Select auth generate/verify */
+ sess->auth.operation = xform->auth.op;
+ sess->auth.algo = xform->auth.algo;
+
+ /* Select auth algo */
+ switch (xform->auth.algo) {
+ case RTE_CRYPTO_AUTH_AES_GMAC:
+ case RTE_CRYPTO_AUTH_AES_GCM:
+ /* Check additional condition for AES_GMAC/GCM */
+ if (sess->cipher.algo != RTE_CRYPTO_CIPHER_AES_GCM)
+ return -EINVAL;
+ sess->chain_order = LIBCRYPTO_CHAIN_COMBINED;
+ break;
+
+ case RTE_CRYPTO_AUTH_MD5:
+ case RTE_CRYPTO_AUTH_SHA1:
+ case RTE_CRYPTO_AUTH_SHA224:
+ case RTE_CRYPTO_AUTH_SHA256:
+ case RTE_CRYPTO_AUTH_SHA384:
+ case RTE_CRYPTO_AUTH_SHA512:
+ sess->auth.mode = LIBCRYPTO_AUTH_AS_AUTH;
+ if (get_auth_algo(xform->auth.algo,
+ &sess->auth.auth.evp_algo) != 0)
+ return -EINVAL;
+ sess->auth.auth.ctx = EVP_MD_CTX_create();
+ break;
+
+ case RTE_CRYPTO_AUTH_MD5_HMAC:
+ case RTE_CRYPTO_AUTH_SHA1_HMAC:
+ case RTE_CRYPTO_AUTH_SHA224_HMAC:
+ case RTE_CRYPTO_AUTH_SHA256_HMAC:
+ case RTE_CRYPTO_AUTH_SHA384_HMAC:
+ case RTE_CRYPTO_AUTH_SHA512_HMAC:
+ sess->auth.mode = LIBCRYPTO_AUTH_AS_HMAC;
+ sess->auth.hmac.ctx = EVP_MD_CTX_create();
+ if (get_auth_algo(xform->auth.algo,
+ &sess->auth.hmac.evp_algo) != 0)
+ return -EINVAL;
+ sess->auth.hmac.pkey = EVP_PKEY_new_mac_key(EVP_PKEY_HMAC, NULL,
+ xform->auth.key.data, xform->auth.key.length);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/** Parse crypto xform chain and set private session parameters */
+int
+libcrypto_set_session_parameters(struct libcrypto_session *sess,
+ const struct rte_crypto_sym_xform *xform)
+{
+ const struct rte_crypto_sym_xform *cipher_xform = NULL;
+ const struct rte_crypto_sym_xform *auth_xform = NULL;
+
+ sess->chain_order = libcrypto_get_chain_order(xform);
+ switch (sess->chain_order) {
+ case LIBCRYPTO_CHAIN_ONLY_CIPHER:
+ cipher_xform = xform;
+ break;
+ case LIBCRYPTO_CHAIN_ONLY_AUTH:
+ auth_xform = xform;
+ break;
+ case LIBCRYPTO_CHAIN_CIPHER_AUTH:
+ cipher_xform = xform;
+ auth_xform = xform->next;
+ break;
+ case LIBCRYPTO_CHAIN_AUTH_CIPHER:
+ auth_xform = xform;
+ cipher_xform = xform->next;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* cipher_xform must be check before auth_xform */
+ if (cipher_xform) {
+ if (libcrypto_set_session_cipher_parameters(
+ sess, cipher_xform)) {
+ LIBCRYPTO_LOG_ERR(
+ "Invalid/unsupported cipher parameters");
+ return -EINVAL;
+ }
+ }
+
+ if (auth_xform) {
+ if (libcrypto_set_session_auth_parameters(sess, auth_xform)) {
+ LIBCRYPTO_LOG_ERR(
+ "Invalid/unsupported auth parameters");
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+/** Reset private session parameters */
+void
+libcrypto_reset_session(struct libcrypto_session *sess)
+{
+ EVP_CIPHER_CTX_free(sess->cipher.ctx);
+
+ switch (sess->auth.mode) {
+ case LIBCRYPTO_AUTH_AS_AUTH:
+ EVP_MD_CTX_destroy(sess->auth.auth.ctx);
+ break;
+ case LIBCRYPTO_AUTH_AS_HMAC:
+ EVP_PKEY_free(sess->auth.hmac.pkey);
+ EVP_MD_CTX_destroy(sess->auth.hmac.ctx);
+ break;
+ default:
+ break;
+ }
+}
+
+/** Provide session for operation */
+static struct libcrypto_session *
+get_session(struct libcrypto_qp *qp, struct rte_crypto_op *op)
+{
+ struct libcrypto_session *sess = NULL;
+
+ if (op->sym->sess_type == RTE_CRYPTO_SYM_OP_WITH_SESSION) {
+ /* get existing session */
+ if (likely(op->sym->session != NULL &&
+ op->sym->session->dev_type ==
+ RTE_CRYPTODEV_LIBCRYPTO_PMD))
+ sess = (struct libcrypto_session *)
+ op->sym->session->_private;
+ } else {
+ /* provide internal session */
+ void *_sess = NULL;
+
+ if (!rte_mempool_get(qp->sess_mp, (void **)&_sess)) {
+ sess = (struct libcrypto_session *)
+ ((struct rte_cryptodev_sym_session *)_sess)
+ ->_private;
+
+ if (unlikely(libcrypto_set_session_parameters(
+ sess, op->sym->xform) != 0)) {
+ rte_mempool_put(qp->sess_mp, _sess);
+ sess = NULL;
+ } else
+ op->sym->session = _sess;
+ }
+ }
+
+ if (sess == NULL)
+ op->status = RTE_CRYPTO_OP_STATUS_INVALID_SESSION;
+
+ return sess;
+}
+
+/*
+ *------------------------------------------------------------------------------
+ * Process Operations
+ *------------------------------------------------------------------------------
+ */
+
+/** Process standard libcrypto cipher encryption */
+static int
+process_libcrypto_cipher_encrypt(uint8_t *src, uint8_t *dst,
+ uint8_t *iv, uint8_t *key, int srclen,
+ EVP_CIPHER_CTX *ctx, const EVP_CIPHER *algo)
+{
+ int dstlen, totlen;
+
+ if (EVP_EncryptInit_ex(ctx, algo, NULL, key, iv) <= 0)
+ goto process_cipher_encrypt_err;
+
+ if (EVP_EncryptUpdate(ctx, dst, &dstlen, src, srclen) <= 0)
+ goto process_cipher_encrypt_err;
+
+ if (EVP_EncryptFinal_ex(ctx, dst + dstlen, &totlen) <= 0)
+ goto process_cipher_encrypt_err;
+
+ return 0;
+
+process_cipher_encrypt_err:
+ LIBCRYPTO_LOG_ERR("Process libcrypto cipher encrypt failed");
+ return -EINVAL;
+}
+
+/** Process standard libcrypto cipher decryption */
+static int
+process_libcrypto_cipher_decrypt(uint8_t *src, uint8_t *dst,
+ uint8_t *iv, uint8_t *key, int srclen,
+ EVP_CIPHER_CTX *ctx, const EVP_CIPHER *algo)
+{
+ int dstlen, totlen;
+
+ if (EVP_DecryptInit_ex(ctx, algo, NULL, key, iv) <= 0)
+ goto process_cipher_decrypt_err;
+
+ if (EVP_CIPHER_CTX_set_padding(ctx, 0) <= 0)
+ goto process_cipher_decrypt_err;
+
+ if (EVP_DecryptUpdate(ctx, dst, &dstlen, src, srclen) <= 0)
+ goto process_cipher_decrypt_err;
+
+ if (EVP_DecryptFinal_ex(ctx, dst + dstlen, &totlen) <= 0)
+ goto process_cipher_decrypt_err;
+
+ return 0;
+
+process_cipher_decrypt_err:
+ LIBCRYPTO_LOG_ERR("Process libcrypto cipher decrypt failed");
+ return -EINVAL;
+}
+
+/** Process cipher des 3 ctr encryption, decryption algorithm */
+static int
+process_libcrypto_cipher_des3ctr(uint8_t *src, uint8_t *dst,
+ uint8_t *iv, uint8_t *key, int srclen, EVP_CIPHER_CTX *ctx)
+{
+ uint8_t ebuf[8], ctr[8];
+ int unused, n;
+
+ /* We use 3DES encryption also for decryption.
+ * IV is not important for 3DES ecb
+ */
+ if (EVP_EncryptInit_ex(ctx, EVP_des_ede3_ecb(), NULL, key, NULL) <= 0)
+ goto process_cipher_des3ctr_err;
+
+ memcpy(ctr, iv, 8);
+ n = 0;
+
+ while (n < srclen) {
+ if (n % 8 == 0) {
+ if (EVP_EncryptUpdate(ctx,
+ (unsigned char *)&ebuf, &unused,
+ (const unsigned char *)&ctr, 8) <= 0)
+ goto process_cipher_des3ctr_err;
+ ctr_inc(ctr);
+ }
+ dst[n] = src[n] ^ ebuf[n % 8];
+ n++;
+ }
+
+ return 0;
+
+process_cipher_des3ctr_err:
+ LIBCRYPTO_LOG_ERR("Process libcrypto cipher des 3 ede ctr failed");
+ return -EINVAL;
+}
+
+/** Process auth/encription aes-gcm algorithm */
+static int
+process_libcrypto_auth_encryption_gcm(uint8_t *src, int srclen,
+ uint8_t *aad, int aadlen, uint8_t *iv, int ivlen,
+ uint8_t *key, uint8_t *dst, uint8_t *tag,
+ EVP_CIPHER_CTX *ctx, const EVP_CIPHER *algo)
+{
+ int len = 0, unused = 0;
+ uint8_t empty[] = {};
+
+ if (EVP_EncryptInit_ex(ctx, algo, NULL, NULL, NULL) <= 0)
+ goto process_auth_encryption_gcm_err;
+
+ if (EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_GCM_SET_IVLEN, ivlen, NULL) <= 0)
+ goto process_auth_encryption_gcm_err;
+
+ if (EVP_EncryptInit_ex(ctx, NULL, NULL, key, iv) <= 0)
+ goto process_auth_encryption_gcm_err;
+
+ if (aadlen > 0) {
+ if (EVP_EncryptUpdate(ctx, NULL, &len, aad, aadlen) <= 0)
+ goto process_auth_encryption_gcm_err;
+
+ /* Workaround open ssl bug in version less then 1.0.1f */
+ if (EVP_EncryptUpdate(ctx, empty, &unused, empty, 0) <= 0)
+ goto process_auth_encryption_gcm_err;
+ }
+
+ if (srclen > 0)
+ if (EVP_EncryptUpdate(ctx, dst, &len, src, srclen) <= 0)
+ goto process_auth_encryption_gcm_err;
+
+ if (EVP_EncryptFinal_ex(ctx, dst + len, &len) <= 0)
+ goto process_auth_encryption_gcm_err;
+
+ if (EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_GCM_GET_TAG, 16, tag) <= 0)
+ goto process_auth_encryption_gcm_err;
+
+ return 0;
+
+process_auth_encryption_gcm_err:
+ LIBCRYPTO_LOG_ERR("Process libcrypto auth encryption gcm failed");
+ return -EINVAL;
+}
+
+static int
+process_libcrypto_auth_decryption_gcm(uint8_t *src, int srclen,
+ uint8_t *aad, int aadlen, uint8_t *iv, int ivlen,
+ uint8_t *key, uint8_t *dst, uint8_t *tag,
+ EVP_CIPHER_CTX *ctx, const EVP_CIPHER *algo)
+{
+ int len = 0, unused = 0;
+ uint8_t empty[] = {};
+
+ if (EVP_DecryptInit_ex(ctx, algo, NULL, NULL, NULL) <= 0)
+ goto process_auth_decryption_gcm_err;
+
+ if (EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_GCM_SET_IVLEN, ivlen, NULL) <= 0)
+ goto process_auth_decryption_gcm_err;
+
+ if (EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_GCM_SET_TAG, 16, tag) <= 0)
+ goto process_auth_decryption_gcm_err;
+
+ if (EVP_DecryptInit_ex(ctx, NULL, NULL, key, iv) <= 0)
+ goto process_auth_decryption_gcm_err;
+
+ if (aadlen > 0) {
+ if (EVP_DecryptUpdate(ctx, NULL, &len, aad, aadlen) <= 0)
+ goto process_auth_decryption_gcm_err;
+
+ /* Workaround open ssl bug in version less then 1.0.1f */
+ if (EVP_DecryptUpdate(ctx, empty, &unused, empty, 0) <= 0)
+ goto process_auth_decryption_gcm_err;
+ }
+
+ if (srclen > 0)
+ if (EVP_DecryptUpdate(ctx, dst, &len, src, srclen) <= 0)
+ goto process_auth_decryption_gcm_err;
+
+ if (EVP_DecryptFinal_ex(ctx, dst + len, &len) <= 0)
+ goto process_auth_decryption_gcm_final_err;
+
+ return 0;
+
+process_auth_decryption_gcm_err:
+ LIBCRYPTO_LOG_ERR("Process libcrypto auth description gcm failed");
+ return -EINVAL;
+
+process_auth_decryption_gcm_final_err:
+ return -EFAULT;
+}
+
+/** Process standard libcrypto auth algorithms */
+static int
+process_libcrypto_auth(uint8_t *src, uint8_t *dst,
+ __rte_unused uint8_t *iv, __rte_unused EVP_PKEY * pkey,
+ int srclen, EVP_MD_CTX *ctx, const EVP_MD *algo)
+{
+ size_t dstlen;
+
+ if (EVP_DigestInit_ex(ctx, algo, NULL) <= 0)
+ goto process_auth_err;
+
+ if (EVP_DigestUpdate(ctx, (char *)src, srclen) <= 0)
+ goto process_auth_err;
+
+ if (EVP_DigestFinal_ex(ctx, dst, (unsigned int *)&dstlen) <= 0)
+ goto process_auth_err;
+
+ return 0;
+
+process_auth_err:
+ LIBCRYPTO_LOG_ERR("Process libcrypto auth failed");
+ return -EINVAL;
+}
+
+/** Process standard libcrypto auth algorithms with hmac */
+static int
+process_libcrypto_auth_hmac(uint8_t *src, uint8_t *dst,
+ __rte_unused uint8_t *iv, EVP_PKEY *pkey,
+ int srclen, EVP_MD_CTX *ctx, const EVP_MD *algo)
+{
+ size_t dstlen;
+
+ if (EVP_DigestSignInit(ctx, NULL, algo, NULL, pkey) <= 0)
+ goto process_auth_err;
+
+ if (EVP_DigestSignUpdate(ctx, (char *)src, srclen) <= 0)
+ goto process_auth_err;
+
+ if (EVP_DigestSignFinal(ctx, dst, &dstlen) <= 0)
+ goto process_auth_err;
+
+ return 0;
+
+process_auth_err:
+ LIBCRYPTO_LOG_ERR("Process libcrypto auth failed");
+ return -EINVAL;
+}
+
+/*----------------------------------------------------------------------------*/
+
+/** Process auth/cipher combined operation */
+static void
+process_libcrypto_combined_op
+ (struct rte_crypto_op *op, struct libcrypto_session *sess,
+ struct rte_mbuf *mbuf_src, struct rte_mbuf *mbuf_dst)
+{
+ /* cipher */
+ uint8_t *src = NULL, *dst = NULL, *iv, *tag, *aad;
+ int srclen, ivlen, aadlen, status = -1;
+
+ iv = op->sym->cipher.iv.data;
+ ivlen = op->sym->cipher.iv.length;
+ aad = op->sym->auth.aad.data;
+ aadlen = op->sym->auth.aad.length;
+
+ tag = op->sym->auth.digest.data;
+ if (tag == NULL)
+ tag = rte_pktmbuf_mtod_offset(mbuf_dst, uint8_t *,
+ op->sym->cipher.data.offset +
+ op->sym->cipher.data.length);
+
+ if (sess->auth.algo == RTE_CRYPTO_AUTH_AES_GMAC)
+ srclen = 0;
+ else {
+ srclen = op->sym->cipher.data.length;
+ src = rte_pktmbuf_mtod_offset(mbuf_src, uint8_t *,
+ op->sym->cipher.data.offset);
+ dst = rte_pktmbuf_mtod_offset(mbuf_dst, uint8_t *,
+ op->sym->cipher.data.offset);
+ }
+
+ if (sess->cipher.direction == RTE_CRYPTO_CIPHER_OP_ENCRYPT)
+ status = process_libcrypto_auth_encryption_gcm(
+ src, srclen, aad, aadlen, iv, ivlen,
+ sess->cipher.key.data, dst, tag,
+ sess->cipher.ctx, sess->cipher.evp_algo);
+ else
+ status = process_libcrypto_auth_decryption_gcm(
+ src, srclen, aad, aadlen, iv, ivlen,
+ sess->cipher.key.data, dst, tag,
+ sess->cipher.ctx, sess->cipher.evp_algo);
+
+ if (status != 0) {
+ if (status == (-EFAULT) &&
+ sess->auth.operation ==
+ RTE_CRYPTO_AUTH_OP_VERIFY)
+ op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
+ else
+ op->status = RTE_CRYPTO_OP_STATUS_ERROR;
+ }
+}
+
+/** Process cipher operation */
+static void
+process_libcrypto_cipher_op
+ (struct rte_crypto_op *op, struct libcrypto_session *sess,
+ struct rte_mbuf *mbuf_src, struct rte_mbuf *mbuf_dst)
+{
+ uint8_t *src, *dst, *iv;
+ int srclen, status;
+
+ srclen = op->sym->cipher.data.length;
+ src = rte_pktmbuf_mtod_offset(mbuf_src, uint8_t *,
+ op->sym->cipher.data.offset);
+ dst = rte_pktmbuf_mtod_offset(mbuf_dst, uint8_t *,
+ op->sym->cipher.data.offset);
+
+ iv = op->sym->cipher.iv.data;
+
+ if (sess->cipher.mode == LIBCRYPTO_CIPHER_LIB)
+ if (sess->cipher.direction == RTE_CRYPTO_CIPHER_OP_ENCRYPT)
+ status = process_libcrypto_cipher_encrypt(src, dst, iv,
+ sess->cipher.key.data, srclen,
+ sess->cipher.ctx,
+ sess->cipher.evp_algo);
+ else
+ status = process_libcrypto_cipher_decrypt(src, dst, iv,
+ sess->cipher.key.data, srclen,
+ sess->cipher.ctx,
+ sess->cipher.evp_algo);
+ else
+ status = process_libcrypto_cipher_des3ctr(src, dst, iv,
+ sess->cipher.key.data, srclen,
+ sess->cipher.ctx);
+
+ if (status != 0)
+ op->status = RTE_CRYPTO_OP_STATUS_ERROR;
+}
+
+/** Process auth operation */
+static void
+process_libcrypto_auth_op
+ (struct rte_crypto_op *op, struct libcrypto_session *sess,
+ struct rte_mbuf *mbuf_src, struct rte_mbuf *mbuf_dst)
+{
+ uint8_t *src, *dst;
+ int srclen, status;
+
+ srclen = op->sym->auth.data.length;
+ src = rte_pktmbuf_mtod_offset(mbuf_src, uint8_t *,
+ op->sym->auth.data.offset);
+
+ if (sess->auth.operation == RTE_CRYPTO_AUTH_OP_VERIFY)
+ dst = (uint8_t *)rte_pktmbuf_append(mbuf_src,
+ op->sym->auth.digest.length);
+ else {
+ dst = op->sym->auth.digest.data;
+ if (dst == NULL)
+ dst = rte_pktmbuf_mtod_offset(mbuf_dst, uint8_t *,
+ op->sym->auth.data.offset +
+ op->sym->auth.data.length);
+ }
+
+ switch (sess->auth.mode) {
+ case LIBCRYPTO_AUTH_AS_AUTH:
+ status = process_libcrypto_auth(src, dst,
+ NULL, NULL, srclen,
+ sess->auth.auth.ctx, sess->auth.auth.evp_algo);
+ break;
+ case LIBCRYPTO_AUTH_AS_HMAC:
+ status = process_libcrypto_auth_hmac(src, dst,
+ NULL, sess->auth.hmac.pkey, srclen,
+ sess->auth.hmac.ctx, sess->auth.hmac.evp_algo);
+ break;
+ default:
+ status = -1;
+ break;
+ }
+
+ if (sess->auth.operation == RTE_CRYPTO_AUTH_OP_VERIFY) {
+ if (memcmp(dst, op->sym->auth.digest.data,
+ op->sym->auth.digest.length) != 0) {
+ op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
+ }
+ /* Trim area used for digest from mbuf. */
+ rte_pktmbuf_trim(mbuf_src,
+ op->sym->auth.digest.length);
+ }
+
+ if (status != 0)
+ op->status = RTE_CRYPTO_OP_STATUS_ERROR;
+}
+
+/** Process crypto operation for mbuf */
+static int
+process_op(const struct libcrypto_qp *qp, struct rte_crypto_op *op,
+ struct libcrypto_session *sess)
+{
+ struct rte_mbuf *msrc, *mdst;
+ int retval;
+
+ msrc = op->sym->m_src;
+ mdst = op->sym->m_dst ? op->sym->m_dst : op->sym->m_src;
+
+ op->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
+
+ switch (sess->chain_order) {
+ case LIBCRYPTO_CHAIN_ONLY_CIPHER:
+ process_libcrypto_cipher_op(op, sess, msrc, mdst);
+ break;
+ case LIBCRYPTO_CHAIN_ONLY_AUTH:
+ process_libcrypto_auth_op(op, sess, msrc, mdst);
+ break;
+ case LIBCRYPTO_CHAIN_CIPHER_AUTH:
+ process_libcrypto_cipher_op(op, sess, msrc, mdst);
+ process_libcrypto_auth_op(op, sess, mdst, mdst);
+ break;
+ case LIBCRYPTO_CHAIN_AUTH_CIPHER:
+ process_libcrypto_auth_op(op, sess, msrc, mdst);
+ process_libcrypto_cipher_op(op, sess, msrc, mdst);
+ break;
+ case LIBCRYPTO_CHAIN_COMBINED:
+ process_libcrypto_combined_op(op, sess, msrc, mdst);
+ break;
+ default:
+ op->status = RTE_CRYPTO_OP_STATUS_ERROR;
+ break;
+ }
+
+ /* Free session if a session-less crypto op */
+ if (op->sym->sess_type == RTE_CRYPTO_SYM_OP_SESSIONLESS) {
+ libcrypto_reset_session(sess);
+ memset(sess, 0, sizeof(struct libcrypto_session));
+ rte_mempool_put(qp->sess_mp, op->sym->session);
+ op->sym->session = NULL;
+ }
+
+
+ if (op->status == RTE_CRYPTO_OP_STATUS_NOT_PROCESSED)
+ op->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
+
+ if (op->status != RTE_CRYPTO_OP_STATUS_ERROR)
+ retval = rte_ring_enqueue(qp->processed_ops, (void *)op);
+ else
+ retval = -1;
+
+ return retval;
+}
+
+/*
+ *------------------------------------------------------------------------------
+ * PMD Framework
+ *------------------------------------------------------------------------------
+ */
+
+/** Enqueue burst */
+static uint16_t
+libcrypto_pmd_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops,
+ uint16_t nb_ops)
+{
+ struct libcrypto_session *sess;
+ struct libcrypto_qp *qp = queue_pair;
+ int i, retval;
+
+ for (i = 0; i < nb_ops; i++) {
+ sess = get_session(qp, ops[i]);
+ if (unlikely(sess == NULL))
+ goto enqueue_err;
+
+ retval = process_op(qp, ops[i], sess);
+ if (unlikely(retval < 0))
+ goto enqueue_err;
+ }
+
+ qp->stats.enqueued_count += i;
+ return i;
+
+enqueue_err:
+ qp->stats.enqueue_err_count++;
+ return i;
+}
+
+/** Dequeue burst */
+static uint16_t
+libcrypto_pmd_dequeue_burst(void *queue_pair, struct rte_crypto_op **ops,
+ uint16_t nb_ops)
+{
+ struct libcrypto_qp *qp = queue_pair;
+
+ unsigned int nb_dequeued = 0;
+
+ nb_dequeued = rte_ring_dequeue_burst(qp->processed_ops,
+ (void **)ops, nb_ops);
+ qp->stats.dequeued_count += nb_dequeued;
+
+ return nb_dequeued;
+}
+
+/** Create LIBCRYPTO crypto device */
+static int
+cryptodev_libcrypto_create(const char *name,
+ struct rte_crypto_vdev_init_params *init_params)
+{
+ struct rte_cryptodev *dev;
+ char crypto_dev_name[RTE_CRYPTODEV_NAME_MAX_LEN];
+ struct libcrypto_private *internals;
+
+ /* create a unique device name */
+ if (create_unique_device_name(crypto_dev_name,
+ RTE_CRYPTODEV_NAME_MAX_LEN) != 0) {
+ LIBCRYPTO_LOG_ERR("failed to create unique cryptodev name");
+ return -EINVAL;
+ }
+
+ dev = rte_cryptodev_pmd_virtual_dev_init(crypto_dev_name,
+ sizeof(struct libcrypto_private),
+ init_params->socket_id);
+ if (dev == NULL) {
+ LIBCRYPTO_LOG_ERR("failed to create cryptodev vdev");
+ goto init_error;
+ }
+
+ dev->dev_type = RTE_CRYPTODEV_LIBCRYPTO_PMD;
+ dev->dev_ops = rte_libcrypto_pmd_ops;
+
+ /* register rx/tx burst functions for data path */
+ dev->dequeue_burst = libcrypto_pmd_dequeue_burst;
+ dev->enqueue_burst = libcrypto_pmd_enqueue_burst;
+
+ dev->feature_flags = RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO |
+ RTE_CRYPTODEV_FF_SYM_OPERATION_CHAINING |
+ RTE_CRYPTODEV_FF_CPU_AESNI;
+
+ /* Set vector instructions mode supported */
+ internals = dev->data->dev_private;
+
+ internals->max_nb_qpairs = init_params->max_nb_queue_pairs;
+ internals->max_nb_sessions = init_params->max_nb_sessions;
+
+ return 0;
+
+init_error:
+ LIBCRYPTO_LOG_ERR("driver %s: cryptodev_libcrypto_create failed", name);
+
+ cryptodev_libcrypto_uninit(crypto_dev_name);
+ return -EFAULT;
+}
+
+/** Initialise LIBCRYPTO crypto device */
+static int
+cryptodev_libcrypto_init(const char *name,
+ const char *input_args)
+{
+ struct rte_crypto_vdev_init_params init_params = {
+ RTE_CRYPTODEV_VDEV_DEFAULT_MAX_NB_QUEUE_PAIRS,
+ RTE_CRYPTODEV_VDEV_DEFAULT_MAX_NB_SESSIONS,
+ rte_socket_id()
+ };
+
+ rte_cryptodev_parse_vdev_init_params(&init_params, input_args);
+
+ RTE_LOG(INFO, PMD, "Initialising %s on NUMA node %d\n", name,
+ init_params.socket_id);
+ RTE_LOG(INFO, PMD, " Max number of queue pairs = %d\n",
+ init_params.max_nb_queue_pairs);
+ RTE_LOG(INFO, PMD, " Max number of sessions = %d\n",
+ init_params.max_nb_sessions);
+
+ return cryptodev_libcrypto_create(name, &init_params);
+}
+
+/** Uninitialise LIBCRYPTO crypto device */
+static int
+cryptodev_libcrypto_uninit(const char *name)
+{
+ if (name == NULL)
+ return -EINVAL;
+
+ RTE_LOG(INFO, PMD,
+ "Closing LIBCRYPTO crypto device %s on numa socket %u\n",
+ name, rte_socket_id());
+
+ return 0;
+}
+
+static struct rte_driver cryptodev_libcrypto_pmd_drv = {
+ .type = PMD_VDEV,
+ .init = cryptodev_libcrypto_init,
+ .uninit = cryptodev_libcrypto_uninit
+};
+
+PMD_REGISTER_DRIVER(cryptodev_libcrypto_pmd_drv, CRYPTODEV_NAME_LIBCRYPTO_PMD);
+DRIVER_REGISTER_PARAM_STRING(CRYPTODEV_NAME_LIBCRYPTO_PMD,
+ "max_nb_queue_pairs=<int> "
+ "max_nb_sessions=<int> "
+ "socket_id=<int>");
diff --git a/drivers/crypto/libcrypto/rte_libcrypto_pmd_ops.c b/drivers/crypto/libcrypto/rte_libcrypto_pmd_ops.c
new file mode 100644
index 0000000..b5d7bd5
--- /dev/null
+++ b/drivers/crypto/libcrypto/rte_libcrypto_pmd_ops.c
@@ -0,0 +1,708 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <string.h>
+
+#include <rte_common.h>
+#include <rte_malloc.h>
+#include <rte_cryptodev_pmd.h>
+
+#include "rte_libcrypto_pmd_private.h"
+
+
+static const struct rte_cryptodev_capabilities libcrypto_pmd_capabilities[] = {
+ { /* MD5 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_MD5_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* MD5 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_MD5,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA1 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 20,
+ .max = 20,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA1 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA1,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 20,
+ .max = 20,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA224 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA224_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 28,
+ .max = 28,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA224 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA224,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 28,
+ .max = 28,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA256 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA256_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 32,
+ .max = 32,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA256 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA256,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 32,
+ .max = 32,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA384 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA384_HMAC,
+ .block_size = 128,
+ .key_size = {
+ .min = 128,
+ .max = 128,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 48,
+ .max = 48,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA384 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA384,
+ .block_size = 128,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 48,
+ .max = 48,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA512 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA512_HMAC,
+ .block_size = 128,
+ .key_size = {
+ .min = 128,
+ .max = 128,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA512 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA512,
+ .block_size = 128,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* AES CBC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .block_size = 16,
+ .key_size = {
+ .min = 16,
+ .max = 32,
+ .increment = 8
+ },
+ .iv_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+ { /* AES CTR */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_AES_CTR,
+ .block_size = 16,
+ .key_size = {
+ .min = 16,
+ .max = 32,
+ .increment = 8
+ },
+ .iv_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+ { /* AES GCM (AUTH) */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_AES_GCM,
+ .block_size = 16,
+ .key_size = {
+ .min = 16,
+ .max = 32,
+ .increment = 8
+ },
+ .digest_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ },
+ .aad_size = {
+ .min = 8,
+ .max = 12,
+ .increment = 4
+ }
+ }, }
+ }, }
+ },
+ { /* AES GCM (CIPHER) */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_AES_GCM,
+ .block_size = 16,
+ .key_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ },
+ .iv_size = {
+ .min = 12,
+ .max = 16,
+ .increment = 4
+ }
+ }, }
+ }, }
+ },
+ { /* AES GMAC (AUTH) */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_AES_GMAC,
+ .block_size = 16,
+ .key_size = {
+ .min = 16,
+ .max = 32,
+ .increment = 8
+ },
+ .digest_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ },
+ .aad_size = {
+ .min = 8,
+ .max = 65532,
+ .increment = 4
+ }
+ }, }
+ }, }
+ },
+ { /* 3DES CBC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_3DES_CBC,
+ .block_size = 8,
+ .key_size = {
+ .min = 16,
+ .max = 24,
+ .increment = 8
+ },
+ .iv_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+ { /* 3DES CTR */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_3DES_CTR,
+ .block_size = 8,
+ .key_size = {
+ .min = 16,
+ .max = 24,
+ .increment = 8
+ },
+ .iv_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+
+ RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
+};
+
+
+/** Configure device */
+static int
+libcrypto_pmd_config(__rte_unused struct rte_cryptodev *dev)
+{
+ return 0;
+}
+
+/** Start device */
+static int
+libcrypto_pmd_start(__rte_unused struct rte_cryptodev *dev)
+{
+ return 0;
+}
+
+/** Stop device */
+static void
+libcrypto_pmd_stop(__rte_unused struct rte_cryptodev *dev)
+{
+}
+
+/** Close device */
+static int
+libcrypto_pmd_close(__rte_unused struct rte_cryptodev *dev)
+{
+ return 0;
+}
+
+
+/** Get device statistics */
+static void
+libcrypto_pmd_stats_get(struct rte_cryptodev *dev,
+ struct rte_cryptodev_stats *stats)
+{
+ int qp_id;
+
+ for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
+ struct libcrypto_qp *qp = dev->data->queue_pairs[qp_id];
+
+ stats->enqueued_count += qp->stats.enqueued_count;
+ stats->dequeued_count += qp->stats.dequeued_count;
+
+ stats->enqueue_err_count += qp->stats.enqueue_err_count;
+ stats->dequeue_err_count += qp->stats.dequeue_err_count;
+ }
+}
+
+/** Reset device statistics */
+static void
+libcrypto_pmd_stats_reset(struct rte_cryptodev *dev)
+{
+ int qp_id;
+
+ for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
+ struct libcrypto_qp *qp = dev->data->queue_pairs[qp_id];
+
+ memset(&qp->stats, 0, sizeof(qp->stats));
+ }
+}
+
+
+/** Get device info */
+static void
+libcrypto_pmd_info_get(struct rte_cryptodev *dev,
+ struct rte_cryptodev_info *dev_info)
+{
+ struct libcrypto_private *internals = dev->data->dev_private;
+
+ if (dev_info != NULL) {
+ dev_info->dev_type = dev->dev_type;
+ dev_info->feature_flags = dev->feature_flags;
+ dev_info->capabilities = libcrypto_pmd_capabilities;
+ dev_info->max_nb_queue_pairs = internals->max_nb_qpairs;
+ dev_info->sym.max_nb_sessions = internals->max_nb_sessions;
+ }
+}
+
+/** Release queue pair */
+static int
+libcrypto_pmd_qp_release(struct rte_cryptodev *dev, uint16_t qp_id)
+{
+ if (dev->data->queue_pairs[qp_id] != NULL) {
+ rte_free(dev->data->queue_pairs[qp_id]);
+ dev->data->queue_pairs[qp_id] = NULL;
+ }
+ return 0;
+}
+
+/** set a unique name for the queue pair based on it's name, dev_id and qp_id */
+static int
+libcrypto_pmd_qp_set_unique_name(struct rte_cryptodev *dev,
+ struct libcrypto_qp *qp)
+{
+ unsigned int n = snprintf(qp->name, sizeof(qp->name),
+ "libcrypto_pmd_%u_qp_%u",
+ dev->data->dev_id, qp->id);
+
+ if (n > sizeof(qp->name))
+ return -1;
+
+ return 0;
+}
+
+
+/** Create a ring to place processed operations on */
+static struct rte_ring *
+libcrypto_pmd_qp_create_processed_ops_ring(struct libcrypto_qp *qp,
+ unsigned int ring_size, int socket_id)
+{
+ struct rte_ring *r;
+
+ r = rte_ring_lookup(qp->name);
+ if (r) {
+ if (r->prod.size >= ring_size) {
+ LIBCRYPTO_LOG_INFO(
+ "Reusing existing ring %s for processed ops",
+ qp->name);
+ return r;
+ }
+
+ LIBCRYPTO_LOG_ERR(
+ "Unable to reuse existing ring %s for processed ops",
+ qp->name);
+ return NULL;
+ }
+
+ return rte_ring_create(qp->name, ring_size, socket_id,
+ RING_F_SP_ENQ | RING_F_SC_DEQ);
+}
+
+
+/** Setup a queue pair */
+static int
+libcrypto_pmd_qp_setup(struct rte_cryptodev *dev, uint16_t qp_id,
+ const struct rte_cryptodev_qp_conf *qp_conf,
+ int socket_id)
+{
+ struct libcrypto_qp *qp = NULL;
+
+ /* Free memory prior to re-allocation if needed. */
+ if (dev->data->queue_pairs[qp_id] != NULL)
+ libcrypto_pmd_qp_release(dev, qp_id);
+
+ /* Allocate the queue pair data structure. */
+ qp = rte_zmalloc_socket("LIBCRYPTO PMD Queue Pair", sizeof(*qp),
+ RTE_CACHE_LINE_SIZE, socket_id);
+ if (qp == NULL)
+ return -ENOMEM;
+
+ qp->id = qp_id;
+ dev->data->queue_pairs[qp_id] = qp;
+
+ if (libcrypto_pmd_qp_set_unique_name(dev, qp))
+ goto qp_setup_cleanup;
+
+ qp->processed_ops = libcrypto_pmd_qp_create_processed_ops_ring(qp,
+ qp_conf->nb_descriptors, socket_id);
+ if (qp->processed_ops == NULL)
+ goto qp_setup_cleanup;
+
+ qp->sess_mp = dev->data->session_pool;
+
+ memset(&qp->stats, 0, sizeof(qp->stats));
+
+ return 0;
+
+qp_setup_cleanup:
+ if (qp)
+ rte_free(qp);
+
+ return -1;
+}
+
+/** Start queue pair */
+static int
+libcrypto_pmd_qp_start(__rte_unused struct rte_cryptodev *dev,
+ __rte_unused uint16_t queue_pair_id)
+{
+ return -ENOTSUP;
+}
+
+/** Stop queue pair */
+static int
+libcrypto_pmd_qp_stop(__rte_unused struct rte_cryptodev *dev,
+ __rte_unused uint16_t queue_pair_id)
+{
+ return -ENOTSUP;
+}
+
+/** Return the number of allocated queue pairs */
+static uint32_t
+libcrypto_pmd_qp_count(struct rte_cryptodev *dev)
+{
+ return dev->data->nb_queue_pairs;
+}
+
+/** Returns the size of the session structure */
+static unsigned
+libcrypto_pmd_session_get_size(struct rte_cryptodev *dev __rte_unused)
+{
+ return sizeof(struct libcrypto_session);
+}
+
+/** Configure the session from a crypto xform chain */
+static void *
+libcrypto_pmd_session_configure(struct rte_cryptodev *dev __rte_unused,
+ struct rte_crypto_sym_xform *xform, void *sess)
+{
+ if (unlikely(sess == NULL)) {
+ LIBCRYPTO_LOG_ERR("invalid session struct");
+ return NULL;
+ }
+
+ if (libcrypto_set_session_parameters(
+ sess, xform) != 0) {
+ LIBCRYPTO_LOG_ERR("failed configure session parameters");
+ return NULL;
+ }
+
+ return sess;
+}
+
+
+/** Clear the memory of session so it doesn't leave key material behind */
+static void
+libcrypto_pmd_session_clear(struct rte_cryptodev *dev __rte_unused, void *sess)
+{
+ /*
+ * Current just resetting the whole data structure, need to investigate
+ * whether a more selective reset of key would be more performant
+ */
+ if (sess) {
+ libcrypto_reset_session(sess);
+ memset(sess, 0, sizeof(struct libcrypto_session));
+ }
+}
+
+struct rte_cryptodev_ops libcrypto_pmd_ops = {
+ .dev_configure = libcrypto_pmd_config,
+ .dev_start = libcrypto_pmd_start,
+ .dev_stop = libcrypto_pmd_stop,
+ .dev_close = libcrypto_pmd_close,
+
+ .stats_get = libcrypto_pmd_stats_get,
+ .stats_reset = libcrypto_pmd_stats_reset,
+
+ .dev_infos_get = libcrypto_pmd_info_get,
+
+ .queue_pair_setup = libcrypto_pmd_qp_setup,
+ .queue_pair_release = libcrypto_pmd_qp_release,
+ .queue_pair_start = libcrypto_pmd_qp_start,
+ .queue_pair_stop = libcrypto_pmd_qp_stop,
+ .queue_pair_count = libcrypto_pmd_qp_count,
+
+ .session_get_size = libcrypto_pmd_session_get_size,
+ .session_configure = libcrypto_pmd_session_configure,
+ .session_clear = libcrypto_pmd_session_clear
+};
+
+struct rte_cryptodev_ops *rte_libcrypto_pmd_ops = &libcrypto_pmd_ops;
diff --git a/drivers/crypto/libcrypto/rte_libcrypto_pmd_private.h b/drivers/crypto/libcrypto/rte_libcrypto_pmd_private.h
new file mode 100644
index 0000000..dbef57f
--- /dev/null
+++ b/drivers/crypto/libcrypto/rte_libcrypto_pmd_private.h
@@ -0,0 +1,174 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _LIBCRYPTO_PMD_PRIVATE_H_
+#define _LIBCRYPTO_PMD_PRIVATE_H_
+
+#include <openssl/evp.h>
+#include <openssl/des.h>
+
+
+#define LIBCRYPTO_LOG_ERR(fmt, args...) \
+ RTE_LOG(ERR, CRYPTODEV, "[%s] %s() line %u: " fmt "\n", \
+ RTE_STR(CRYPTODEV_NAME_LIBCRYPTO_PMD), \
+ __func__, __LINE__, ## args)
+
+#ifdef RTE_LIBRTE_LIBCRYPTO_DEBUG
+#define LIBCRYPTO_LOG_INFO(fmt, args...) \
+ RTE_LOG(INFO, CRYPTODEV, "[%s] %s() line %u: " fmt "\n", \
+ RTE_STR(CRYPTODEV_NAME_LIBCRYPTO_PMD), \
+ __func__, __LINE__, ## args)
+
+#define LIBCRYPTO_LOG_DBG(fmt, args...) \
+ RTE_LOG(DEBUG, CRYPTODEV, "[%s] %s() line %u: " fmt "\n", \
+ RTE_STR(CRYPTODEV_NAME_LIBCRYPTO_PMD), \
+ __func__, __LINE__, ## args)
+#else
+#define LIBCRYPTO_LOG_INFO(fmt, args...)
+#define LIBCRYPTO_LOG_DBG(fmt, args...)
+#endif
+
+
+/** LIBCRYPTO operation order mode enumerator */
+enum libcrypto_chain_order {
+ LIBCRYPTO_CHAIN_ONLY_CIPHER,
+ LIBCRYPTO_CHAIN_ONLY_AUTH,
+ LIBCRYPTO_CHAIN_CIPHER_AUTH,
+ LIBCRYPTO_CHAIN_AUTH_CIPHER,
+ LIBCRYPTO_CHAIN_COMBINED,
+ LIBCRYPTO_CHAIN_NOT_SUPPORTED
+};
+
+/** LIBCRYPTO cipher mode enumerator */
+enum libcrypto_cipher_mode {
+ LIBCRYPTO_CIPHER_LIB,
+ LIBCRYPTO_CIPHER_DES3CTR,
+};
+
+/** LIBCRYPTO auth mode enumerator */
+enum libcrypto_auth_mode {
+ LIBCRYPTO_AUTH_AS_AUTH,
+ LIBCRYPTO_AUTH_AS_HMAC,
+};
+
+/** private data structure for each LIBCRYPTO crypto device */
+struct libcrypto_private {
+ unsigned int max_nb_qpairs;
+ /**< Max number of queue pairs */
+ unsigned int max_nb_sessions;
+ /**< Max number of sessions */
+};
+
+/** LIBCRYPTO crypto queue pair */
+struct libcrypto_qp {
+ uint16_t id;
+ /**< Queue Pair Identifier */
+ char name[RTE_CRYPTODEV_NAME_LEN];
+ /**< Unique Queue Pair Name */
+ struct rte_ring *processed_ops;
+ /**< Ring for placing process packets */
+ struct rte_mempool *sess_mp;
+ /**< Session Mempool */
+ struct rte_cryptodev_stats stats;
+ /**< Queue pair statistics */
+} __rte_cache_aligned;
+
+/** LIBCRYPTO crypto private session structure */
+struct libcrypto_session {
+ enum libcrypto_chain_order chain_order;
+ /**< chain order mode */
+
+ /** Cipher Parameters */
+ struct {
+ enum rte_crypto_cipher_operation direction;
+ /**< cipher operation direction */
+ enum libcrypto_cipher_mode mode;
+ /**< cipher operation mode */
+ enum rte_crypto_cipher_algorithm algo;
+ /**< cipher algorithm */
+
+ struct {
+ uint8_t data[32];
+ /**< key data */
+ size_t length;
+ /**< key length in bytes */
+ } key;
+
+ const EVP_CIPHER *evp_algo;
+ /**< pointer to EVP algorithm function */
+ EVP_CIPHER_CTX *ctx;
+ /**< pointer to EVP context structure */
+ } cipher;
+
+ /** Authentication Parameters */
+ struct {
+ enum rte_crypto_auth_operation operation;
+ /**< auth operation generate or verify */
+ enum libcrypto_auth_mode mode;
+ /**< auth operation mode */
+ enum rte_crypto_auth_algorithm algo;
+ /**< cipher algorithm */
+
+ union {
+ struct {
+ const EVP_MD *evp_algo;
+ /**< pointer to EVP algorithm function */
+ EVP_MD_CTX *ctx;
+ /**< pointer to EVP context structure */
+ } auth;
+
+ struct {
+ EVP_PKEY *pkey;
+ /**< pointer to EVP key */
+ const EVP_MD *evp_algo;
+ /**< pointer to EVP algorithm function */
+ EVP_MD_CTX *ctx;
+ /**< pointer to EVP context structure */
+ } hmac;
+ };
+ } auth;
+
+} __rte_cache_aligned;
+
+/** Set and validate LIBCRYPTO crypto session parameters */
+extern int
+libcrypto_set_session_parameters(struct libcrypto_session *sess,
+ const struct rte_crypto_sym_xform *xform);
+
+/** Reset LIBCRYPTO crypto session parameters */
+extern void
+libcrypto_reset_session(struct libcrypto_session *sess);
+
+/** device specific operations function pointer structure */
+extern struct rte_cryptodev_ops *rte_libcrypto_pmd_ops;
+
+#endif /* _LIBCRYPTO_PMD_PRIVATE_H_ */
diff --git a/drivers/crypto/libcrypto/rte_pmd_libcrypto_version.map b/drivers/crypto/libcrypto/rte_pmd_libcrypto_version.map
new file mode 100644
index 0000000..cc5829e
--- /dev/null
+++ b/drivers/crypto/libcrypto/rte_pmd_libcrypto_version.map
@@ -0,0 +1,3 @@
+DPDK_16.11 {
+ local: *;
+};
diff --git a/lib/librte_cryptodev/rte_cryptodev.h b/lib/librte_cryptodev/rte_cryptodev.h
index b1658eb..311fd78 100644
--- a/lib/librte_cryptodev/rte_cryptodev.h
+++ b/lib/librte_cryptodev/rte_cryptodev.h
@@ -56,6 +56,8 @@ extern "C" {
/**< AES-NI Multi buffer PMD device name */
#define CRYPTODEV_NAME_AESNI_GCM_PMD crypto_aesni_gcm
/**< AES-NI GCM PMD device name */
+#define CRYPTODEV_NAME_LIBCRYPTO_PMD cryptodev_libcrypto
+/**< Open SSL Crypto PMD device name */
#define CRYPTODEV_NAME_QAT_SYM_PMD crypto_qat
/**< Intel QAT Symmetric Crypto PMD device name */
#define CRYPTODEV_NAME_SNOW3G_PMD crypto_snow3g
@@ -73,7 +75,8 @@ enum rte_cryptodev_type {
RTE_CRYPTODEV_QAT_SYM_PMD, /**< QAT PMD Symmetric Crypto */
RTE_CRYPTODEV_SNOW3G_PMD, /**< SNOW 3G PMD */
RTE_CRYPTODEV_KASUMI_PMD, /**< KASUMI PMD */
- RTE_CRYPTODEV_ZUC_PMD /**< ZUC PMD */
+ RTE_CRYPTODEV_ZUC_PMD, /**< ZUC PMD */
+ RTE_CRYPTODEV_LIBCRYPTO_PMD, /**< LibCrypto PMD */
};
extern const char **rte_cyptodev_names;
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 440bf83..43ea1c1 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -131,18 +131,19 @@ endif # $(CONFIG_RTE_LIBRTE_VHOST)
_LDLIBS-$(CONFIG_RTE_LIBRTE_VMXNET3_PMD) += -lrte_pmd_vmxnet3_uio
ifeq ($(CONFIG_RTE_LIBRTE_CRYPTODEV),y)
-_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB) += -lrte_pmd_aesni_mb
-_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB) += -L$(AESNI_MULTI_BUFFER_LIB_PATH) -lIPSec_MB
-_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_GCM) += -lrte_pmd_aesni_gcm -lcrypto
-_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_GCM) += -L$(AESNI_MULTI_BUFFER_LIB_PATH) -lIPSec_MB
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB) += -lrte_pmd_aesni_mb
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB) += -L$(AESNI_MULTI_BUFFER_LIB_PATH) -lIPSec_MB
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_GCM) += -lrte_pmd_aesni_gcm -lcrypto
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_GCM) += -L$(AESNI_MULTI_BUFFER_LIB_PATH) -lIPSec_MB
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += -lrte_pmd_libcrypto -lcrypto
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO) += -lrte_pmd_null_crypto
-_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += -lrte_pmd_qat -lcrypto
-_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G) += -lrte_pmd_snow3g
-_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G) += -L$(LIBSSO_SNOW3G_PATH)/build -lsso_snow3g
-_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_KASUMI) += -lrte_pmd_kasumi
-_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_KASUMI) += -L$(LIBSSO_KASUMI_PATH)/build -lsso_kasumi
-_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ZUC) += -lrte_pmd_zuc
-_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ZUC) += -L$(LIBSSO_ZUC_PATH)/build -lsso_zuc
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += -lrte_pmd_qat -lcrypto
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G) += -lrte_pmd_snow3g
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G) += -L$(LIBSSO_SNOW3G_PATH)/build -lsso_snow3g
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_KASUMI) += -lrte_pmd_kasumi
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_KASUMI) += -L$(LIBSSO_KASUMI_PATH)/build -lsso_kasumi
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ZUC) += -lrte_pmd_zuc
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ZUC) += -L$(LIBSSO_ZUC_PATH)/build -lsso_zuc
endif # CONFIG_RTE_LIBRTE_CRYPTODEV
endif # !CONFIG_RTE_BUILD_SHARED_LIBS
--
2.5.0
^ permalink raw reply related
* [PATCH v6 2/4] app/test: cryptodev AES tests rework
From: Slawomir Mrozowicz @ 2016-10-04 15:11 UTC (permalink / raw)
To: dev; +Cc: Slawomir Mrozowicz, Piotr Azarewicz, Fiona Trahe
In-Reply-To: <1475593882-32364-1-git-send-email-slawomirx.mrozowicz@intel.com>
This patch rework AES tests .
In general - rename AES-named functions to blockcipher functions pattern.
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
---
v6:
- fix checkpatch warnings
---
app/test/Makefile | 2 +-
app/test/test_cryptodev.c | 75 +-
app/test/test_cryptodev_aes.c | 687 -----------------
app/test/test_cryptodev_aes.h | 1124 ----------------------------
app/test/test_cryptodev_aes_test_vectors.h | 797 ++++++++++++++++++++
app/test/test_cryptodev_blockcipher.c | 516 +++++++++++++
app/test/test_cryptodev_blockcipher.h | 124 +++
7 files changed, 1486 insertions(+), 1839 deletions(-)
delete mode 100644 app/test/test_cryptodev_aes.c
delete mode 100644 app/test/test_cryptodev_aes.h
create mode 100644 app/test/test_cryptodev_aes_test_vectors.h
create mode 100644 app/test/test_cryptodev_blockcipher.c
create mode 100644 app/test/test_cryptodev_blockcipher.h
diff --git a/app/test/Makefile b/app/test/Makefile
index 611d77a..5be023a 100644
--- a/app/test/Makefile
+++ b/app/test/Makefile
@@ -193,7 +193,7 @@ endif
SRCS-$(CONFIG_RTE_LIBRTE_PMD_RING) += test_pmd_ring.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_RING) += test_pmd_ring_perf.c
-SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev_aes.c
+SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev_blockcipher.c
SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev_perf.c
SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev.c
diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
index 9d7caba..8f03157 100644
--- a/app/test/test_cryptodev.c
+++ b/app/test/test_cryptodev.c
@@ -43,7 +43,8 @@
#include "test.h"
#include "test_cryptodev.h"
-#include "test_cryptodev_aes.h"
+#include "test_cryptodev_blockcipher.h"
+#include "test_cryptodev_aes_test_vectors.h"
#include "test_cryptodev_kasumi_test_vectors.h"
#include "test_cryptodev_kasumi_hash_test_vectors.h"
#include "test_cryptodev_snow3g_test_vectors.h"
@@ -86,12 +87,16 @@ struct crypto_unittest_params {
*/
static int
test_AES_CBC_HMAC_SHA512_decrypt_create_session_params(
- struct crypto_unittest_params *ut_params);
+ struct crypto_unittest_params *ut_params, uint8_t *cipher_key,
+ uint8_t *hmac_key);
static int
test_AES_CBC_HMAC_SHA512_decrypt_perform(struct rte_cryptodev_sym_session *sess,
struct crypto_unittest_params *ut_params,
- struct crypto_testsuite_params *ts_param);
+ struct crypto_testsuite_params *ts_param,
+ const uint8_t *cipher,
+ const uint8_t *digest,
+ const uint8_t *iv);
static struct rte_mbuf *
setup_test_string(struct rte_mempool *mpool,
@@ -313,7 +318,7 @@ testsuite_setup(void)
nb_devs = rte_cryptodev_count();
if (nb_devs < 1) {
- RTE_LOG(ERR, USER1, "No crypto devices found?");
+ RTE_LOG(ERR, USER1, "No crypto devices found?\n");
return TEST_FAILED;
}
@@ -872,7 +877,6 @@ static const uint8_t catch_22_quote_2_512_bytes_AES_CBC_HMAC_SHA1_digest[] = {
0x18, 0x8c, 0x1d, 0x32
};
-
static int
test_AES_CBC_HMAC_SHA1_encrypt_digest(void)
{
@@ -1003,17 +1007,24 @@ static const uint8_t catch_22_quote_2_512_bytes_AES_CBC_HMAC_SHA512_digest[] = {
static int
test_AES_CBC_HMAC_SHA512_decrypt_create_session_params(
- struct crypto_unittest_params *ut_params);
+ struct crypto_unittest_params *ut_params,
+ uint8_t *cipher_key,
+ uint8_t *hmac_key);
static int
test_AES_CBC_HMAC_SHA512_decrypt_perform(struct rte_cryptodev_sym_session *sess,
struct crypto_unittest_params *ut_params,
- struct crypto_testsuite_params *ts_params);
+ struct crypto_testsuite_params *ts_params,
+ const uint8_t *cipher,
+ const uint8_t *digest,
+ const uint8_t *iv);
static int
test_AES_CBC_HMAC_SHA512_decrypt_create_session_params(
- struct crypto_unittest_params *ut_params)
+ struct crypto_unittest_params *ut_params,
+ uint8_t *cipher_key,
+ uint8_t *hmac_key)
{
/* Setup Cipher Parameters */
@@ -1022,7 +1033,7 @@ test_AES_CBC_HMAC_SHA512_decrypt_create_session_params(
ut_params->cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_AES_CBC;
ut_params->cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_DECRYPT;
- ut_params->cipher_xform.cipher.key.data = aes_cbc_key;
+ ut_params->cipher_xform.cipher.key.data = cipher_key;
ut_params->cipher_xform.cipher.key.length = CIPHER_KEY_LENGTH_AES_CBC;
/* Setup HMAC Parameters */
@@ -1031,7 +1042,7 @@ test_AES_CBC_HMAC_SHA512_decrypt_create_session_params(
ut_params->auth_xform.auth.op = RTE_CRYPTO_AUTH_OP_VERIFY;
ut_params->auth_xform.auth.algo = RTE_CRYPTO_AUTH_SHA512_HMAC;
- ut_params->auth_xform.auth.key.data = hmac_sha512_key;
+ ut_params->auth_xform.auth.key.data = hmac_key;
ut_params->auth_xform.auth.key.length = HMAC_KEY_LENGTH_SHA512;
ut_params->auth_xform.auth.digest_length = DIGEST_BYTE_LENGTH_SHA512;
@@ -1042,12 +1053,15 @@ test_AES_CBC_HMAC_SHA512_decrypt_create_session_params(
static int
test_AES_CBC_HMAC_SHA512_decrypt_perform(struct rte_cryptodev_sym_session *sess,
struct crypto_unittest_params *ut_params,
- struct crypto_testsuite_params *ts_params)
+ struct crypto_testsuite_params *ts_params,
+ const uint8_t *cipher,
+ const uint8_t *digest,
+ const uint8_t *iv)
{
/* Generate test mbuf data and digest */
ut_params->ibuf = setup_test_string(ts_params->mbuf_pool,
(const char *)
- catch_22_quote_2_512_bytes_AES_CBC_ciphertext,
+ cipher,
QUOTE_512_BYTES, 0);
ut_params->digest = (uint8_t *)rte_pktmbuf_append(ut_params->ibuf,
@@ -1055,7 +1069,7 @@ test_AES_CBC_HMAC_SHA512_decrypt_perform(struct rte_cryptodev_sym_session *sess,
TEST_ASSERT_NOT_NULL(ut_params->digest, "no room to append digest");
rte_memcpy(ut_params->digest,
- catch_22_quote_2_512_bytes_AES_CBC_HMAC_SHA512_digest,
+ digest,
DIGEST_BYTE_LENGTH_SHA512);
/* Generate Crypto op data structure */
@@ -1085,7 +1099,7 @@ test_AES_CBC_HMAC_SHA512_decrypt_perform(struct rte_cryptodev_sym_session *sess,
ut_params->ibuf, 0);
sym_op->cipher.iv.length = CIPHER_IV_LENGTH_AES_CBC;
- rte_memcpy(sym_op->cipher.iv.data, aes_cbc_iv,
+ rte_memcpy(sym_op->cipher.iv.data, iv,
CIPHER_IV_LENGTH_AES_CBC);
sym_op->cipher.data.offset = CIPHER_IV_LENGTH_AES_CBC;
@@ -1115,14 +1129,15 @@ test_AES_CBC_HMAC_SHA512_decrypt_perform(struct rte_cryptodev_sym_session *sess,
}
static int
-test_AES_mb_all(void)
+test_AES_chain_mb_all(void)
{
struct crypto_testsuite_params *ts_params = &testsuite_params;
int status;
- status = test_AES_all_tests(ts_params->mbuf_pool,
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
ts_params->op_mpool, ts_params->valid_devs[0],
- RTE_CRYPTODEV_AESNI_MB_PMD);
+ RTE_CRYPTODEV_AESNI_MB_PMD,
+ BLKCIPHER_AES_CHAIN_TYPE);
TEST_ASSERT_EQUAL(status, 0, "Test failed");
@@ -1130,14 +1145,15 @@ test_AES_mb_all(void)
}
static int
-test_AES_qat_all(void)
+test_AES_chain_qat_all(void)
{
struct crypto_testsuite_params *ts_params = &testsuite_params;
int status;
- status = test_AES_all_tests(ts_params->mbuf_pool,
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
ts_params->op_mpool, ts_params->valid_devs[0],
- RTE_CRYPTODEV_QAT_SYM_PMD);
+ RTE_CRYPTODEV_QAT_SYM_PMD,
+ BLKCIPHER_AES_CHAIN_TYPE);
TEST_ASSERT_EQUAL(status, 0, "Test failed");
@@ -4024,7 +4040,8 @@ test_multi_session(void)
uint16_t i;
- test_AES_CBC_HMAC_SHA512_decrypt_create_session_params(ut_params);
+ test_AES_CBC_HMAC_SHA512_decrypt_create_session_params(ut_params,
+ aes_cbc_key, hmac_sha512_key);
rte_cryptodev_info_get(ts_params->valid_devs[0], &dev_info);
@@ -4043,10 +4060,14 @@ test_multi_session(void)
i);
/* Attempt to send a request on each session */
- TEST_ASSERT_SUCCESS(test_AES_CBC_HMAC_SHA512_decrypt_perform(
- sessions[i], ut_params, ts_params),
- "Failed to perform decrypt on request "
- "number %u.", i);
+ TEST_ASSERT_SUCCESS( test_AES_CBC_HMAC_SHA512_decrypt_perform(
+ sessions[i],
+ ut_params,
+ ts_params,
+ catch_22_quote_2_512_bytes_AES_CBC_ciphertext,
+ catch_22_quote_2_512_bytes_AES_CBC_HMAC_SHA512_digest,
+ aes_cbc_iv),
+ "Failed to perform decrypt on request number %u.", i);
/* free crypto operation structure */
if (ut_params->op)
rte_crypto_op_free(ut_params->op);
@@ -4700,7 +4721,7 @@ static struct unit_test_suite cryptodev_qat_testsuite = {
TEST_CASE_ST(ut_setup, ut_teardown,
test_multi_session),
- TEST_CASE_ST(ut_setup, ut_teardown, test_AES_qat_all),
+ TEST_CASE_ST(ut_setup, ut_teardown, test_AES_chain_qat_all),
TEST_CASE_ST(ut_setup, ut_teardown, test_stats),
/** AES GCM Authenticated Encryption */
@@ -4836,7 +4857,7 @@ static struct unit_test_suite cryptodev_aesni_mb_testsuite = {
.setup = testsuite_setup,
.teardown = testsuite_teardown,
.unit_test_cases = {
- TEST_CASE_ST(ut_setup, ut_teardown, test_AES_mb_all),
+ TEST_CASE_ST(ut_setup, ut_teardown, test_AES_chain_mb_all),
TEST_CASES_END() /**< NULL terminate unit test array */
}
diff --git a/app/test/test_cryptodev_aes.c b/app/test/test_cryptodev_aes.c
deleted file mode 100644
index e19c45b..0000000
--- a/app/test/test_cryptodev_aes.c
+++ /dev/null
@@ -1,687 +0,0 @@
-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2015-2016 Intel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <rte_common.h>
-#include <rte_hexdump.h>
-#include <rte_mbuf.h>
-#include <rte_malloc.h>
-#include <rte_memcpy.h>
-
-#include <rte_crypto.h>
-#include <rte_cryptodev.h>
-#include <rte_cryptodev_pmd.h>
-
-#include "test.h"
-#include "test_cryptodev_aes.h"
-
-#ifndef AES_TEST_MSG_LEN
-#define AES_TEST_MSG_LEN 256
-#endif
-
-#define AES_TEST_OP_ENCRYPT 0x01
-#define AES_TEST_OP_DECRYPT 0x02
-#define AES_TEST_OP_AUTH_GEN 0x04
-#define AES_TEST_OP_AUTH_VERIFY 0x08
-
-#define AES_TEST_FEATURE_OOP 0x01
-#define AES_TEST_FEATURE_SESSIONLESS 0x02
-#define AES_TEST_FEATURE_STOPPER 0x04 /* stop upon failing */
-
-#define AES_TEST_TARGET_PMD_MB 0x0001 /* Multi-buffer flag */
-#define AES_TEST_TARGET_PMD_QAT 0x0002 /* QAT flag */
-
-#define AES_TEST_OP_CIPHER (AES_TEST_OP_ENCRYPT | \
- AES_TEST_OP_DECRYPT)
-
-#define AES_TEST_OP_AUTH (AES_TEST_OP_AUTH_GEN | \
- AES_TEST_OP_AUTH_VERIFY)
-
-#define AES_TEST_OP_ENC_AUTH_GEN (AES_TEST_OP_ENCRYPT | \
- AES_TEST_OP_AUTH_GEN)
-
-#define AES_TEST_OP_AUTH_VERIFY_DEC (AES_TEST_OP_DECRYPT | \
- AES_TEST_OP_AUTH_VERIFY)
-
-struct aes_test_case {
- const char *test_descr; /* test description */
- const struct aes_test_data *test_data;
- uint8_t op_mask; /* operation mask */
- uint8_t feature_mask;
- uint32_t pmd_mask;
-};
-
-static const struct aes_test_case aes_test_cases[] = {
- {
- .test_descr = "AES-128-CTR HMAC-SHA1 Encryption Digest",
- .test_data = &aes_test_data_1,
- .op_mask = AES_TEST_OP_ENC_AUTH_GEN,
- .pmd_mask = AES_TEST_TARGET_PMD_MB |
- AES_TEST_TARGET_PMD_QAT
- },
- {
- .test_descr = "AES-128-CTR HMAC-SHA1 Decryption Digest "
- "Verify",
- .test_data = &aes_test_data_1,
- .op_mask = AES_TEST_OP_AUTH_VERIFY_DEC,
- .pmd_mask = AES_TEST_TARGET_PMD_MB |
- AES_TEST_TARGET_PMD_QAT
- },
- {
- .test_descr = "AES-192-CTR XCBC Encryption Digest",
- .test_data = &aes_test_data_2,
- .op_mask = AES_TEST_OP_ENC_AUTH_GEN,
- .pmd_mask = AES_TEST_TARGET_PMD_MB |
- AES_TEST_TARGET_PMD_QAT
- },
- {
- .test_descr = "AES-192-CTR XCBC Decryption Digest Verify",
- .test_data = &aes_test_data_2,
- .op_mask = AES_TEST_OP_AUTH_VERIFY_DEC,
- .pmd_mask = AES_TEST_TARGET_PMD_MB |
- AES_TEST_TARGET_PMD_QAT
- },
- {
- .test_descr = "AES-256-CTR HMAC-SHA1 Encryption Digest",
- .test_data = &aes_test_data_3,
- .op_mask = AES_TEST_OP_ENC_AUTH_GEN,
- .pmd_mask = AES_TEST_TARGET_PMD_MB |
- AES_TEST_TARGET_PMD_QAT
- },
- {
- .test_descr = "AES-256-CTR HMAC-SHA1 Decryption Digest "
- "Verify",
- .test_data = &aes_test_data_3,
- .op_mask = AES_TEST_OP_AUTH_VERIFY_DEC,
- .pmd_mask = AES_TEST_TARGET_PMD_MB |
- AES_TEST_TARGET_PMD_QAT
- },
- {
- .test_descr = "AES-128-CBC HMAC-SHA1 Encryption Digest",
- .test_data = &aes_test_data_4,
- .op_mask = AES_TEST_OP_ENC_AUTH_GEN,
- .pmd_mask = AES_TEST_TARGET_PMD_MB |
- AES_TEST_TARGET_PMD_QAT
- },
- {
- .test_descr = "AES-128-CBC HMAC-SHA1 Decryption Digest "
- "Verify",
- .test_data = &aes_test_data_4,
- .op_mask = AES_TEST_OP_AUTH_VERIFY_DEC,
- .pmd_mask = AES_TEST_TARGET_PMD_MB |
- AES_TEST_TARGET_PMD_QAT
- },
- {
- .test_descr = "AES-128-CBC HMAC-SHA256 Encryption Digest",
- .test_data = &aes_test_data_5,
- .op_mask = AES_TEST_OP_ENC_AUTH_GEN,
- .pmd_mask = AES_TEST_TARGET_PMD_MB |
- AES_TEST_TARGET_PMD_QAT
- },
- {
- .test_descr = "AES-128-CBC HMAC-SHA256 Decryption Digest "
- "Verify",
- .test_data = &aes_test_data_5,
- .op_mask = AES_TEST_OP_AUTH_VERIFY_DEC,
- .pmd_mask = AES_TEST_TARGET_PMD_MB |
- AES_TEST_TARGET_PMD_QAT
- },
- {
- .test_descr = "AES-128-CBC HMAC-SHA512 Encryption Digest",
- .test_data = &aes_test_data_6,
- .op_mask = AES_TEST_OP_ENC_AUTH_GEN,
- .pmd_mask = AES_TEST_TARGET_PMD_MB |
- AES_TEST_TARGET_PMD_QAT
- },
- {
- .test_descr = "AES-128-CBC HMAC-SHA512 Encryption Digest "
- "Sessionless",
- .test_data = &aes_test_data_6,
- .op_mask = AES_TEST_OP_ENC_AUTH_GEN,
- .feature_mask = AES_TEST_FEATURE_SESSIONLESS,
- .pmd_mask = AES_TEST_TARGET_PMD_MB
- },
- {
- .test_descr = "AES-128-CBC HMAC-SHA512 Decryption Digest "
- "Verify",
- .test_data = &aes_test_data_6,
- .op_mask = AES_TEST_OP_AUTH_VERIFY_DEC,
- .pmd_mask = AES_TEST_TARGET_PMD_MB |
- AES_TEST_TARGET_PMD_QAT
- },
- {
- .test_descr = "AES-128-CBC XCBC Encryption Digest",
- .test_data = &aes_test_data_7,
- .op_mask = AES_TEST_OP_ENC_AUTH_GEN,
- .pmd_mask = AES_TEST_TARGET_PMD_MB |
- AES_TEST_TARGET_PMD_QAT
- },
- {
- .test_descr = "AES-128-CBC XCBC Decryption Digest Verify",
- .test_data = &aes_test_data_7,
- .op_mask = AES_TEST_OP_AUTH_VERIFY_DEC,
- .pmd_mask = AES_TEST_TARGET_PMD_MB |
- AES_TEST_TARGET_PMD_QAT
- },
- {
- .test_descr = "AES-128-CBC HMAC-SHA1 Encryption Digest "
- "OOP",
- .test_data = &aes_test_data_4,
- .op_mask = AES_TEST_OP_ENC_AUTH_GEN,
- .feature_mask = AES_TEST_FEATURE_OOP,
- .pmd_mask = AES_TEST_TARGET_PMD_QAT
- },
- {
- .test_descr = "AES-128-CBC HMAC-SHA1 Decryption Digest "
- "Verify OOP",
- .test_data = &aes_test_data_4,
- .op_mask = AES_TEST_OP_AUTH_VERIFY_DEC,
- .feature_mask = AES_TEST_FEATURE_OOP,
- .pmd_mask = AES_TEST_TARGET_PMD_QAT
- },
- {
- .test_descr = "AES-128-CBC HMAC-SHA224 Encryption Digest",
- .test_data = &aes_test_data_8,
- .op_mask = AES_TEST_OP_ENC_AUTH_GEN,
- .pmd_mask = AES_TEST_TARGET_PMD_MB |
- AES_TEST_TARGET_PMD_QAT
- },
- {
- .test_descr = "AES-128-CBC HMAC-SHA224 Decryption Digest "
- "Verify",
- .test_data = &aes_test_data_8,
- .op_mask = AES_TEST_OP_AUTH_VERIFY_DEC,
- .pmd_mask = AES_TEST_TARGET_PMD_MB |
- AES_TEST_TARGET_PMD_QAT
- },
- {
- .test_descr = "AES-128-CBC HMAC-SHA384 Encryption Digest",
- .test_data = &aes_test_data_9,
- .op_mask = AES_TEST_OP_ENC_AUTH_GEN,
- .pmd_mask = AES_TEST_TARGET_PMD_MB |
- AES_TEST_TARGET_PMD_QAT
- },
- {
- .test_descr = "AES-128-CBC HMAC-SHA384 Decryption Digest "
- "Verify",
- .test_data = &aes_test_data_9,
- .op_mask = AES_TEST_OP_AUTH_VERIFY_DEC,
- .pmd_mask = AES_TEST_TARGET_PMD_MB |
- AES_TEST_TARGET_PMD_QAT
- },
-};
-
-static int
-test_AES_one_case(const struct aes_test_case *t,
- struct rte_mempool *mbuf_pool,
- struct rte_mempool *op_mpool,
- uint8_t dev_id,
- enum rte_cryptodev_type cryptodev_type,
- char *test_msg)
-{
- struct rte_mbuf *ibuf = NULL;
- struct rte_mbuf *obuf = NULL;
- struct rte_mbuf *iobuf;
- struct rte_crypto_sym_xform *cipher_xform = NULL;
- struct rte_crypto_sym_xform *auth_xform = NULL;
- struct rte_crypto_sym_xform *init_xform = NULL;
- struct rte_crypto_sym_op *sym_op = NULL;
- struct rte_crypto_op *op = NULL;
- struct rte_cryptodev_sym_session *sess = NULL;
-
- int status = TEST_SUCCESS;
- const struct aes_test_data *tdata = t->test_data;
- uint8_t cipher_key[tdata->cipher_key.len];
- uint8_t auth_key[tdata->auth_key.len];
- uint32_t buf_len = tdata->ciphertext.len;
- uint32_t digest_len = 0;
- char *buf_p = NULL;
-
- if (tdata->cipher_key.len)
- memcpy(cipher_key, tdata->cipher_key.data,
- tdata->cipher_key.len);
- if (tdata->auth_key.len)
- memcpy(auth_key, tdata->auth_key.data,
- tdata->auth_key.len);
-
- switch (cryptodev_type) {
- case RTE_CRYPTODEV_QAT_SYM_PMD:
- digest_len = tdata->digest.len;
- break;
- case RTE_CRYPTODEV_AESNI_MB_PMD:
- digest_len = tdata->digest.truncated_len;
- break;
- default:
- snprintf(test_msg, AES_TEST_MSG_LEN, "line %u FAILED: %s",
- __LINE__, "Unsupported PMD type");
- status = TEST_FAILED;
- goto error_exit;
- }
-
- /* preparing data */
- ibuf = rte_pktmbuf_alloc(mbuf_pool);
- if (!ibuf) {
- snprintf(test_msg, AES_TEST_MSG_LEN, "line %u FAILED: %s",
- __LINE__, "Allocation of rte_mbuf failed");
- status = TEST_FAILED;
- goto error_exit;
- }
-
- if (t->op_mask & AES_TEST_OP_CIPHER)
- buf_len += tdata->iv.len;
- if (t->op_mask & AES_TEST_OP_AUTH)
- buf_len += digest_len;
-
- buf_p = rte_pktmbuf_append(ibuf, buf_len);
- if (!buf_p) {
- snprintf(test_msg, AES_TEST_MSG_LEN, "line %u FAILED: %s",
- __LINE__, "No room to append mbuf");
- status = TEST_FAILED;
- goto error_exit;
- }
-
- if (t->op_mask & AES_TEST_OP_CIPHER) {
- rte_memcpy(buf_p, tdata->iv.data, tdata->iv.len);
- buf_p += tdata->iv.len;
- }
-
- /* only encryption requires plaintext.data input,
- * decryption/(digest gen)/(digest verify) use ciphertext.data
- * to be computed */
- if (t->op_mask & AES_TEST_OP_ENCRYPT) {
- rte_memcpy(buf_p, tdata->plaintext.data,
- tdata->plaintext.len);
- buf_p += tdata->plaintext.len;
- } else {
- rte_memcpy(buf_p, tdata->ciphertext.data,
- tdata->ciphertext.len);
- buf_p += tdata->ciphertext.len;
- }
-
- if (t->op_mask & AES_TEST_OP_AUTH_VERIFY)
- rte_memcpy(buf_p, tdata->digest.data, digest_len);
- else
- memset(buf_p, 0, digest_len);
-
- if (t->feature_mask & AES_TEST_FEATURE_OOP) {
- obuf = rte_pktmbuf_alloc(mbuf_pool);
- if (!obuf) {
- snprintf(test_msg, AES_TEST_MSG_LEN, "line %u "
- "FAILED: %s", __LINE__,
- "Allocation of rte_mbuf failed");
- status = TEST_FAILED;
- goto error_exit;
- }
-
- buf_p = rte_pktmbuf_append(obuf, buf_len);
- if (!buf_p) {
- snprintf(test_msg, AES_TEST_MSG_LEN, "line %u "
- "FAILED: %s", __LINE__,
- "No room to append mbuf");
- status = TEST_FAILED;
- goto error_exit;
- }
- memset(buf_p, 0, buf_len);
- }
-
- /* Generate Crypto op data structure */
- op = rte_crypto_op_alloc(op_mpool, RTE_CRYPTO_OP_TYPE_SYMMETRIC);
- if (!op) {
- snprintf(test_msg, AES_TEST_MSG_LEN, "line %u FAILED: %s",
- __LINE__, "Failed to allocate symmetric crypto "
- "operation struct");
- status = TEST_FAILED;
- goto error_exit;
- }
-
- sym_op = op->sym;
-
- sym_op->m_src = ibuf;
-
- if (t->feature_mask & AES_TEST_FEATURE_OOP) {
- sym_op->m_dst = obuf;
- iobuf = obuf;
- } else {
- sym_op->m_dst = NULL;
- iobuf = ibuf;
- }
-
- /* sessionless op requires allocate xform using
- * rte_crypto_op_sym_xforms_alloc(), otherwise rte_zmalloc()
- * is used */
- if (t->feature_mask & AES_TEST_FEATURE_SESSIONLESS) {
- uint32_t n_xforms = 0;
-
- if (t->op_mask & AES_TEST_OP_CIPHER)
- n_xforms++;
- if (t->op_mask & AES_TEST_OP_AUTH)
- n_xforms++;
-
- if (rte_crypto_op_sym_xforms_alloc(op, n_xforms)
- == NULL) {
- snprintf(test_msg, AES_TEST_MSG_LEN, "line %u "
- "FAILED: %s", __LINE__, "Failed to "
- "allocate space for crypto transforms");
- status = TEST_FAILED;
- goto error_exit;
- }
- } else {
- cipher_xform = rte_zmalloc(NULL,
- sizeof(struct rte_crypto_sym_xform), 0);
-
- auth_xform = rte_zmalloc(NULL,
- sizeof(struct rte_crypto_sym_xform), 0);
-
- if (!cipher_xform || !auth_xform) {
- snprintf(test_msg, AES_TEST_MSG_LEN, "line %u "
- "FAILED: %s", __LINE__, "Failed to "
- "allocate memory for crypto transforms");
- status = TEST_FAILED;
- goto error_exit;
- }
- }
-
- /* preparing xform, for sessioned op, init_xform is initialized
- * here and later as param in rte_cryptodev_sym_session_create()
- * call */
- if (t->op_mask == AES_TEST_OP_ENC_AUTH_GEN) {
- if (t->feature_mask & AES_TEST_FEATURE_SESSIONLESS) {
- cipher_xform = op->sym->xform;
- auth_xform = cipher_xform->next;
- auth_xform->next = NULL;
- } else {
- cipher_xform->next = auth_xform;
- auth_xform->next = NULL;
- init_xform = cipher_xform;
- }
- } else if (t->op_mask == AES_TEST_OP_AUTH_VERIFY_DEC) {
- if (t->feature_mask & AES_TEST_FEATURE_SESSIONLESS) {
- auth_xform = op->sym->xform;
- cipher_xform = auth_xform->next;
- cipher_xform->next = NULL;
- } else {
- auth_xform->next = cipher_xform;
- cipher_xform->next = NULL;
- init_xform = auth_xform;
- }
- } else if ((t->op_mask == AES_TEST_OP_ENCRYPT) ||
- (t->op_mask == AES_TEST_OP_DECRYPT)) {
- if (t->feature_mask & AES_TEST_FEATURE_SESSIONLESS)
- cipher_xform = op->sym->xform;
- else
- init_xform = cipher_xform;
- cipher_xform->next = NULL;
- } else if ((t->op_mask == AES_TEST_OP_AUTH_GEN) ||
- (t->op_mask == AES_TEST_OP_AUTH_VERIFY)) {
- if (t->feature_mask & AES_TEST_FEATURE_SESSIONLESS)
- auth_xform = op->sym->xform;
- else
- init_xform = auth_xform;
- auth_xform->next = NULL;
- } else {
- snprintf(test_msg, AES_TEST_MSG_LEN, "line %u FAILED: %s",
- __LINE__, "Unrecognized operation");
- status = TEST_FAILED;
- goto error_exit;
- }
-
- /*configure xforms & sym_op cipher and auth data*/
- if (t->op_mask & AES_TEST_OP_CIPHER) {
- cipher_xform->type = RTE_CRYPTO_SYM_XFORM_CIPHER;
- cipher_xform->cipher.algo = tdata->crypto_algo;
- if (t->op_mask & AES_TEST_OP_ENCRYPT)
- cipher_xform->cipher.op =
- RTE_CRYPTO_CIPHER_OP_ENCRYPT;
- else
- cipher_xform->cipher.op =
- RTE_CRYPTO_CIPHER_OP_DECRYPT;
- cipher_xform->cipher.key.data = cipher_key;
- cipher_xform->cipher.key.length = tdata->cipher_key.len;
-
- sym_op->cipher.data.offset = tdata->iv.len;
- sym_op->cipher.data.length = tdata->ciphertext.len;
- sym_op->cipher.iv.data = rte_pktmbuf_mtod(sym_op->m_src,
- uint8_t *);
- sym_op->cipher.iv.length = tdata->iv.len;
- sym_op->cipher.iv.phys_addr = rte_pktmbuf_mtophys(
- sym_op->m_src);
- }
-
- if (t->op_mask & AES_TEST_OP_AUTH) {
- uint32_t auth_data_offset = 0;
- uint32_t digest_offset = tdata->ciphertext.len;
-
- if (t->op_mask & AES_TEST_OP_CIPHER) {
- digest_offset += tdata->iv.len;
- auth_data_offset += tdata->iv.len;
- }
-
- auth_xform->type = RTE_CRYPTO_SYM_XFORM_AUTH;
- auth_xform->auth.algo = tdata->auth_algo;
- auth_xform->auth.key.length = tdata->auth_key.len;
- auth_xform->auth.key.data = auth_key;
- auth_xform->auth.digest_length = digest_len;
-
- if (t->op_mask & AES_TEST_OP_AUTH_GEN) {
- auth_xform->auth.op = RTE_CRYPTO_AUTH_OP_GENERATE;
- sym_op->auth.digest.data = rte_pktmbuf_mtod_offset
- (iobuf, uint8_t *, digest_offset);
- sym_op->auth.digest.phys_addr =
- rte_pktmbuf_mtophys_offset(iobuf,
- digest_offset);
- } else {
- auth_xform->auth.op = RTE_CRYPTO_AUTH_OP_VERIFY;
- sym_op->auth.digest.data = rte_pktmbuf_mtod_offset
- (sym_op->m_src, uint8_t *, digest_offset);
- sym_op->auth.digest.phys_addr =
- rte_pktmbuf_mtophys_offset(sym_op->m_src,
- digest_offset);
- }
-
- sym_op->auth.data.offset = auth_data_offset;
- sym_op->auth.data.length = tdata->ciphertext.len;
- sym_op->auth.digest.length = digest_len;
- }
-
- /* create session for sessioned op */
- if (!(t->feature_mask & AES_TEST_FEATURE_SESSIONLESS)) {
- sess = rte_cryptodev_sym_session_create(dev_id,
- init_xform);
- if (!sess) {
- snprintf(test_msg, AES_TEST_MSG_LEN, "line %u "
- "FAILED: %s", __LINE__,
- "Session creation failed");
- status = TEST_FAILED;
- goto error_exit;
- }
-
- /* attach symmetric crypto session to crypto operations */
- rte_crypto_op_attach_sym_session(op, sess);
- }
-
- /* Process crypto operation */
- if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
- snprintf(test_msg, AES_TEST_MSG_LEN, "line %u FAILED: %s",
- __LINE__, "Error sending packet for encryption");
- status = TEST_FAILED;
- goto error_exit;
- }
-
- op = NULL;
-
- while (rte_cryptodev_dequeue_burst(dev_id, 0, &op, 1) == 0)
- rte_pause();
-
- if (!op) {
- snprintf(test_msg, AES_TEST_MSG_LEN, "line %u FAILED: %s",
- __LINE__, "Failed to process sym crypto op");
- status = TEST_FAILED;
- goto error_exit;
- }
-
- TEST_HEXDUMP(stdout, "m_src:",
- rte_pktmbuf_mtod(sym_op->m_src, uint8_t *), buf_len);
- if (t->feature_mask & AES_TEST_FEATURE_OOP)
- TEST_HEXDUMP(stdout, "m_dst:",
- rte_pktmbuf_mtod(sym_op->m_dst, uint8_t *),
- buf_len);
-
- /* Verify results */
- if (op->status != RTE_CRYPTO_OP_STATUS_SUCCESS) {
- if (t->op_mask & AES_TEST_OP_AUTH_VERIFY)
- snprintf(test_msg, AES_TEST_MSG_LEN, "line %u "
- "FAILED: Digest verification failed "
- "(0x%X)", __LINE__, op->status);
- else
- snprintf(test_msg, AES_TEST_MSG_LEN, "line %u "
- "FAILED: Digest verification failed "
- "(0x%X)", __LINE__, op->status);
- status = TEST_FAILED;
- goto error_exit;
- }
-
- if (t->op_mask & AES_TEST_OP_CIPHER) {
- uint8_t *crypto_res;
- const uint8_t *compare_ref;
- uint32_t compare_len;
-
- crypto_res = rte_pktmbuf_mtod_offset(iobuf, uint8_t *,
- tdata->iv.len);
-
- if (t->op_mask & AES_TEST_OP_ENCRYPT) {
- compare_ref = tdata->ciphertext.data;
- compare_len = tdata->ciphertext.len;
- } else {
- compare_ref = tdata->plaintext.data;
- compare_len = tdata->plaintext.len;
- }
-
- if (memcmp(crypto_res, compare_ref, compare_len)) {
- snprintf(test_msg, AES_TEST_MSG_LEN, "line %u "
- "FAILED: %s", __LINE__,
- "Crypto data not as expected");
- status = TEST_FAILED;
- goto error_exit;
- }
- }
-
- if (t->op_mask & AES_TEST_OP_AUTH_GEN) {
- uint8_t *auth_res;
-
- if (t->op_mask & AES_TEST_OP_CIPHER)
- auth_res = rte_pktmbuf_mtod_offset(iobuf,
- uint8_t *,
- tdata->iv.len + tdata->ciphertext.len);
- else
- auth_res = rte_pktmbuf_mtod_offset(iobuf,
- uint8_t *, tdata->ciphertext.len);
-
- if (memcmp(auth_res, tdata->digest.data, digest_len)) {
- snprintf(test_msg, AES_TEST_MSG_LEN, "line %u "
- "FAILED: %s", __LINE__, "Generated "
- "digest data not as expected");
- status = TEST_FAILED;
- goto error_exit;
- }
- }
-
- snprintf(test_msg, AES_TEST_MSG_LEN, "PASS");
-
-error_exit:
- if (!(t->feature_mask & AES_TEST_FEATURE_SESSIONLESS)) {
- if (sess)
- rte_cryptodev_sym_session_free(dev_id, sess);
- if (cipher_xform)
- rte_free(cipher_xform);
- if (auth_xform)
- rte_free(auth_xform);
- }
-
- if (op)
- rte_crypto_op_free(op);
-
- if (obuf)
- rte_pktmbuf_free(obuf);
-
- if (ibuf)
- rte_pktmbuf_free(ibuf);
-
- return status;
-}
-
-int
-test_AES_all_tests(struct rte_mempool *mbuf_pool,
- struct rte_mempool *op_mpool,
- uint8_t dev_id,
- enum rte_cryptodev_type cryptodev_type)
-{
- int status, overall_status = TEST_SUCCESS;
- uint32_t i, test_index = 0;
- char test_msg[AES_TEST_MSG_LEN + 1];
- uint32_t n_test_cases = sizeof(aes_test_cases) /
- sizeof(aes_test_cases[0]);
- uint32_t target_pmd_mask = 0;
-
- switch (cryptodev_type) {
- case RTE_CRYPTODEV_AESNI_MB_PMD:
- target_pmd_mask = AES_TEST_TARGET_PMD_MB;
- break;
- case RTE_CRYPTODEV_QAT_SYM_PMD:
- target_pmd_mask = AES_TEST_TARGET_PMD_QAT;
- break;
- default:
- TEST_ASSERT(-1, "Unrecognized cryptodev type");
- break;
- }
-
- for (i = 0; i < n_test_cases; i++) {
- const struct aes_test_case *tc = &aes_test_cases[i];
-
- if (!(tc->pmd_mask & target_pmd_mask))
- continue;
-
- status = test_AES_one_case(tc, mbuf_pool, op_mpool,
- dev_id, cryptodev_type, test_msg);
-
- printf(" %u) TestCase %s %s\n", test_index ++,
- tc->test_descr, test_msg);
-
- if (status != TEST_SUCCESS) {
- if (overall_status == TEST_SUCCESS)
- overall_status = status;
-
- if (tc->feature_mask & AES_TEST_FEATURE_STOPPER)
- break;
- }
- }
-
- return overall_status;
-}
diff --git a/app/test/test_cryptodev_aes.h b/app/test/test_cryptodev_aes.h
deleted file mode 100644
index ef518e0..0000000
--- a/app/test/test_cryptodev_aes.h
+++ /dev/null
@@ -1,1124 +0,0 @@
-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2016 Intel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef TEST_CRYPTODEV_AES_H_
-#define TEST_CRYPTODEV_AES_H_
-
-struct aes_test_data {
- enum rte_crypto_cipher_algorithm crypto_algo;
-
- struct {
- uint8_t data[64];
- unsigned len;
- } cipher_key;
-
- struct {
- uint8_t data[64] __rte_aligned(16);
- unsigned len;
- } iv;
-
- struct {
- uint8_t data[2048];
- unsigned len;
- } plaintext;
-
- struct {
- uint8_t data[2048];
- unsigned len;
- } ciphertext;
-
- enum rte_crypto_auth_algorithm auth_algo;
-
- struct {
- uint8_t data[128];
- unsigned len;
- } auth_key;
-
- struct {
- uint8_t data[128];
- unsigned len; /* for qat */
- unsigned truncated_len; /* for mb */
- } digest;
-};
-
-int
-test_AES_all_tests(struct rte_mempool *mbuf_pool,
- struct rte_mempool *op_mpool,
- uint8_t dev_id,
- enum rte_cryptodev_type cryptodev_type);
-
-/* test vectors */
-/* AES128-CTR-SHA1 test vector */
-static const struct aes_test_data aes_test_data_1 = {
- .crypto_algo = RTE_CRYPTO_CIPHER_AES_CTR,
- .cipher_key = {
- .data = {
- 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6,
- 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C
- },
- .len = 16
- },
- .iv = {
- .data = {
- 0xF0, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7,
- 0xF8, 0xF9, 0xFA, 0xFB, 0xFC, 0xFD, 0xFE, 0xFF
- },
- .len = 16
- },
- .plaintext = {
- .data = {
- 0x6B, 0xC1, 0xBE, 0xE2, 0x2E, 0x40, 0x9F, 0x96,
- 0xE9, 0x3D, 0x7E, 0x11, 0x73, 0x93, 0x17, 0x2A,
- 0xAE, 0x2D, 0x8A, 0x57, 0x1E, 0x03, 0xAC, 0x9C,
- 0x9E, 0xB7, 0x6F, 0xAC, 0x45, 0xAF, 0x8E, 0x51,
- 0x30, 0xC8, 0x1C, 0x46, 0xA3, 0x5C, 0xE4, 0x11,
- 0xE5, 0xFB, 0xC1, 0x19, 0x1A, 0x0A, 0x52, 0xEF,
- 0xF6, 0x9F, 0x24, 0x45, 0xDF, 0x4F, 0x9B, 0x17,
- 0xAD, 0x2B, 0x41, 0x7B, 0xE6, 0x6C, 0x37, 0x10
- },
- .len = 64
- },
- .ciphertext = {
- .data = {
- 0x87, 0x4D, 0x61, 0x91, 0xB6, 0x20, 0xE3, 0x26,
- 0x1B, 0xEF, 0x68, 0x64, 0x99, 0x0D, 0xB6, 0xCE,
- 0x98, 0x06, 0xF6, 0x6B, 0x79, 0x70, 0xFD, 0xFF,
- 0x86, 0x17, 0x18, 0x7B, 0xB9, 0xFF, 0xFD, 0xFF,
- 0x5A, 0xE4, 0xDF, 0x3E, 0xDB, 0xD5, 0xD3, 0x5E,
- 0x5B, 0x4F, 0x09, 0x02, 0x0D, 0xB0, 0x3E, 0xAB,
- 0x1E, 0x03, 0x1D, 0xDA, 0x2F, 0xBE, 0x03, 0xD1,
- 0x79, 0x21, 0x70, 0xA0, 0xF3, 0x00, 0x9C, 0xEE
- },
- .len = 64
- },
- .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
- .auth_key = {
- .data = {
- 0xF8, 0x2A, 0xC7, 0x54, 0xDB, 0x96, 0x18, 0xAA,
- 0xC3, 0xA1, 0x53, 0xF6, 0x1F, 0x17, 0x60, 0xBD,
- 0xDE, 0xF4, 0xDE, 0xAD
- },
- .len = 20
- },
- .digest = {
- .data = {
- 0x9B, 0x6F, 0x0C, 0x43, 0xF5, 0xC1, 0x3E, 0xB0,
- 0xB1, 0x70, 0xB8, 0x2B, 0x33, 0x09, 0xD2, 0xB2,
- 0x56, 0x20, 0xFB, 0xFE
- },
- .len = 20,
- .truncated_len = 12
- }
-};
-
-/** AES-192-CTR XCBC test vector */
-static const struct aes_test_data aes_test_data_2 = {
- .crypto_algo = RTE_CRYPTO_CIPHER_AES_CTR,
- .cipher_key = {
- .data = {
- 0xCB, 0xC5, 0xED, 0x5B, 0xE7, 0x7C, 0xBD, 0x8C,
- 0x50, 0xD9, 0x30, 0xF2, 0xB5, 0x6A, 0x0E, 0x5F,
- 0xAA, 0xAE, 0xAD, 0xA2, 0x1F, 0x49, 0x52, 0xD4
- },
- .len = 24
- },
- .iv = {
- .data = {
- 0x3F, 0x69, 0xA8, 0xCD, 0xE8, 0xF0, 0xEF, 0x40,
- 0xB8, 0x7A, 0x4B, 0xED, 0x2B, 0xAF, 0xBF, 0x57
- },
- .len = 16
- },
- .plaintext = {
- .data = {
- 0x01, 0x0F, 0x10, 0x1F, 0x20, 0x1C, 0x0E, 0xB8,
- 0xFB, 0x5C, 0xCD, 0xCC, 0x1F, 0xF9, 0xAF, 0x0B,
- 0x95, 0x03, 0x74, 0x99, 0x49, 0xE7, 0x62, 0x55,
- 0xDA, 0xEA, 0x13, 0x20, 0x1D, 0xC6, 0xCC, 0xCC,
- 0xD1, 0x70, 0x75, 0x47, 0x02, 0x2F, 0xFB, 0x86,
- 0xBB, 0x6B, 0x23, 0xD2, 0xC9, 0x74, 0xD7, 0x7B,
- 0x08, 0x03, 0x3B, 0x79, 0x39, 0xBB, 0x91, 0x29,
- 0xDA, 0x14, 0x39, 0x8D, 0xFF, 0x81, 0x50, 0x96,
- },
- .len = 64
- },
- .ciphertext = {
- .data = {
- 0x4A, 0x6C, 0xC8, 0xCC, 0x96, 0x2A, 0x13, 0x84,
- 0x1C, 0x36, 0x88, 0xE9, 0xE5, 0x94, 0x70, 0xB2,
- 0x14, 0x5B, 0x13, 0x80, 0xEA, 0xD8, 0x8D, 0x37,
- 0xFD, 0x70, 0xA8, 0x83, 0xE8, 0x2B, 0x88, 0x1E,
- 0xBA, 0x94, 0x3F, 0xF6, 0xB3, 0x1F, 0xDE, 0x34,
- 0xF3, 0x5B, 0x80, 0xE9, 0xAB, 0xF5, 0x1C, 0x29,
- 0xB6, 0xD9, 0x76, 0x2B, 0x06, 0xC6, 0x74, 0xF1,
- 0x59, 0x5E, 0x9E, 0xA5, 0x7B, 0x2D, 0xD7, 0xF0
- },
- .len = 64
- },
- .auth_algo = RTE_CRYPTO_AUTH_AES_XCBC_MAC,
- .auth_key = {
- .data = {
- 0x87, 0x61, 0x54, 0x53, 0xC4, 0x6D, 0xDD, 0x51,
- 0xE1, 0x9F, 0x86, 0x64, 0x39, 0x0A, 0xE6, 0x59
- },
- .len = 16
- },
- .digest = {
- .data = {
- 0xCA, 0x33, 0xB3, 0x3B, 0x16, 0x94, 0xAA, 0x55,
- 0x36, 0x6B, 0x45, 0x46
- },
- .len = 12,
- .truncated_len = 12
- }
-};
-
-/** AES-256-CTR SHA1 test vector */
-static const struct aes_test_data aes_test_data_3 = {
- .crypto_algo = RTE_CRYPTO_CIPHER_AES_CTR,
- .cipher_key = {
- .data = {
- 0x60, 0x3D, 0xEB, 0x10, 0x15, 0xCA, 0x71, 0xBE,
- 0x2B, 0x73, 0xAE, 0xF0, 0x85, 0x7D, 0x77, 0x81,
- 0x1F, 0x35, 0x2C, 0x07, 0x3B, 0x61, 0x08, 0xD7,
- 0x2D, 0x98, 0x10, 0xA3, 0x09, 0x14, 0xDF, 0xF4
- },
- .len = 32
- },
- .iv = {
- .data = {
- 0xF0, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7,
- 0xF8, 0xF9, 0xFA, 0xFB, 0xFC, 0xFD, 0xFE, 0xFF
- },
- .len = 16
- },
- .plaintext = {
- .data = {
- 0x6B, 0xC1, 0xBE, 0xE2, 0x2E, 0x40, 0x9F, 0x96,
- 0xE9, 0x3D, 0x7E, 0x11, 0x73, 0x93, 0x17, 0x2A,
- 0xAE, 0x2D, 0x8A, 0x57, 0x1E, 0x03, 0xAC, 0x9C,
- 0x9E, 0xB7, 0x6F, 0xAC, 0x45, 0xAF, 0x8E, 0x51,
- 0x30, 0xC8, 0x1C, 0x46, 0xA3, 0x5C, 0xE4, 0x11,
- 0xE5, 0xFB, 0xC1, 0x19, 0x1A, 0x0A, 0x52, 0xEF,
- 0xF6, 0x9F, 0x24, 0x45, 0xDF, 0x4F, 0x9B, 0x17,
- 0xAD, 0x2B, 0x41, 0x7B, 0xE6, 0x6C, 0x37, 0x10
- },
- .len = 64
- },
- .ciphertext = {
- .data = {
- 0x60, 0x1E, 0xC3, 0x13, 0x77, 0x57, 0x89, 0xA5,
- 0xB7, 0xA7, 0xF5, 0x04, 0xBB, 0xF3, 0xD2, 0x28,
- 0xF4, 0x43, 0xE3, 0xCA, 0x4D, 0x62, 0xB5, 0x9A,
- 0xCA, 0x84, 0xE9, 0x90, 0xCA, 0xCA, 0xF5, 0xC5,
- 0x2B, 0x09, 0x30, 0xDA, 0xA2, 0x3D, 0xE9, 0x4C,
- 0xE8, 0x70, 0x17, 0xBA, 0x2D, 0x84, 0x98, 0x8D,
- 0xDF, 0xC9, 0xC5, 0x8D, 0xB6, 0x7A, 0xAD, 0xA6,
- 0x13, 0xC2, 0xDD, 0x08, 0x45, 0x79, 0x41, 0xA6
- },
- .len = 64
- },
- .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
- .auth_key = {
- .data = {
- 0xF8, 0x2A, 0xC7, 0x54, 0xDB, 0x96, 0x18, 0xAA,
- 0xC3, 0xA1, 0x53, 0xF6, 0x1F, 0x17, 0x60, 0xBD,
- 0xDE, 0xF4, 0xDE, 0xAD
- },
- .len = 20
- },
- .digest = {
- .data = {
- 0x3B, 0x1A, 0x9D, 0x82, 0x35, 0xD5, 0xDD, 0x64,
- 0xCC, 0x1B, 0xA9, 0xC0, 0xEB, 0xE9, 0x42, 0x16,
- 0xE7, 0x87, 0xA3, 0xEF
- },
- .len = 20,
- .truncated_len = 12
- }
-};
-
-/** AES-128-CBC SHA1 test vector */
-static const struct aes_test_data aes_test_data_4 = {
- .crypto_algo = RTE_CRYPTO_CIPHER_AES_CBC,
- .cipher_key = {
- .data = {
- 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
- 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A
- },
- .len = 16
- },
- .iv = {
- .data = {
- 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
- 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
- },
- .len = 16
- },
- .plaintext = {
- .data = {
- "What a lousy earth! He wondered how many people "
- "were destitute that same night even in his own "
- "prosperous country, how many homes were "
- "shanties, how many husbands were drunk and "
- "wives socked, and how many children were "
- "bullied, abused, or abandoned. How many "
- "families hungered for food they could not "
- "afford to buy? How many hearts were broken? How "
- "many suicides would take place that same night, "
- "how many people would go insane? How many "
- "cockroaches and landlords would triumph? How "
- "many winners were losers, successes failures, "
- "and rich men poor men? How many wise guys were "
- "stupid? How many happy endings were unhappy "
- "endings? How many honest men were liars, brave "
- "men cowards, loyal men traitors, how many "
- "sainted men were corrupt, how many people in "
- "positions of trust had sold their souls to "
- "bodyguards, how many had never had souls? How "
- "many straight-and-narrow paths were crooked "
- "paths? How many best families were worst "
- "families and how many good people were bad "
- "people? When you added them all up and then "
- "subtracted, you might be left with only the "
- "children, and perhaps with Albert Einstein and "
- "an old violinist or sculptor somewhere."
- },
- .len = 512
- },
- .ciphertext = {
- .data = {
- 0x8B, 0x4D, 0xDA, 0x1B, 0xCF, 0x04, 0xA0, 0x31,
- 0xB4, 0xBF, 0xBD, 0x68, 0x43, 0x20, 0x7E, 0x76,
- 0xB1, 0x96, 0x8B, 0xA2, 0x7C, 0xA2, 0x83, 0x9E,
- 0x39, 0x5A, 0x2F, 0x7E, 0x92, 0xB4, 0x48, 0x1A,
- 0x3F, 0x6B, 0x5D, 0xDF, 0x52, 0x85, 0x5F, 0x8E,
- 0x42, 0x3C, 0xFB, 0xE9, 0x1A, 0x24, 0xD6, 0x08,
- 0xDD, 0xFD, 0x16, 0xFB, 0xE9, 0x55, 0xEF, 0xF0,
- 0xA0, 0x8D, 0x13, 0xAB, 0x81, 0xC6, 0x90, 0x01,
- 0xB5, 0x18, 0x84, 0xB3, 0xF6, 0xE6, 0x11, 0x57,
- 0xD6, 0x71, 0xC6, 0x3C, 0x3F, 0x2F, 0x33, 0xEE,
- 0x24, 0x42, 0x6E, 0xAC, 0x0B, 0xCA, 0xEC, 0xF9,
- 0x84, 0xF8, 0x22, 0xAA, 0x60, 0xF0, 0x32, 0xA9,
- 0x75, 0x75, 0x3B, 0xCB, 0x70, 0x21, 0x0A, 0x8D,
- 0x0F, 0xE0, 0xC4, 0x78, 0x2B, 0xF8, 0x97, 0xE3,
- 0xE4, 0x26, 0x4B, 0x29, 0xDA, 0x88, 0xCD, 0x46,
- 0xEC, 0xAA, 0xF9, 0x7F, 0xF1, 0x15, 0xEA, 0xC3,
- 0x87, 0xE6, 0x31, 0xF2, 0xCF, 0xDE, 0x4D, 0x80,
- 0x70, 0x91, 0x7E, 0x0C, 0xF7, 0x26, 0x3A, 0x92,
- 0x4F, 0x18, 0x83, 0xC0, 0x8F, 0x59, 0x01, 0xA5,
- 0x88, 0xD1, 0xDB, 0x26, 0x71, 0x27, 0x16, 0xF5,
- 0xEE, 0x10, 0x82, 0xAC, 0x68, 0x26, 0x9B, 0xE2,
- 0x6D, 0xD8, 0x9A, 0x80, 0xDF, 0x04, 0x31, 0xD5,
- 0xF1, 0x35, 0x5C, 0x3B, 0xDD, 0x9A, 0x65, 0xBA,
- 0x58, 0x34, 0x85, 0x61, 0x1C, 0x42, 0x10, 0x76,
- 0x73, 0x02, 0x42, 0xC9, 0x23, 0x18, 0x8E, 0xB4,
- 0x6F, 0xB4, 0xA3, 0x54, 0x6E, 0x88, 0x3B, 0x62,
- 0x7C, 0x02, 0x8D, 0x4C, 0x9F, 0xC8, 0x45, 0xF4,
- 0xC9, 0xDE, 0x4F, 0xEB, 0x22, 0x83, 0x1B, 0xE4,
- 0x49, 0x37, 0xE4, 0xAD, 0xE7, 0xCD, 0x21, 0x54,
- 0xBC, 0x1C, 0xC2, 0x04, 0x97, 0xB4, 0x10, 0x61,
- 0xF0, 0xE4, 0xEF, 0x27, 0x63, 0x3A, 0xDA, 0x91,
- 0x41, 0x25, 0x62, 0x1C, 0x5C, 0xB6, 0x38, 0x4A,
- 0x88, 0x71, 0x59, 0x5A, 0x8D, 0xA0, 0x09, 0xAF,
- 0x72, 0x94, 0xD7, 0x79, 0x5C, 0x60, 0x7C, 0x8F,
- 0x4C, 0xF5, 0xD9, 0xA1, 0x39, 0x6D, 0x81, 0x28,
- 0xEF, 0x13, 0x28, 0xDF, 0xF5, 0x3E, 0xF7, 0x8E,
- 0x09, 0x9C, 0x78, 0x18, 0x79, 0xB8, 0x68, 0xD7,
- 0xA8, 0x29, 0x62, 0xAD, 0xDE, 0xE1, 0x61, 0x76,
- 0x1B, 0x05, 0x16, 0xCD, 0xBF, 0x02, 0x8E, 0xA6,
- 0x43, 0x6E, 0x92, 0x55, 0x4F, 0x60, 0x9C, 0x03,
- 0xB8, 0x4F, 0xA3, 0x02, 0xAC, 0xA8, 0xA7, 0x0C,
- 0x1E, 0xB5, 0x6B, 0xF8, 0xC8, 0x4D, 0xDE, 0xD2,
- 0xB0, 0x29, 0x6E, 0x40, 0xE6, 0xD6, 0xC9, 0xE6,
- 0xB9, 0x0F, 0xB6, 0x63, 0xF5, 0xAA, 0x2B, 0x96,
- 0xA7, 0x16, 0xAC, 0x4E, 0x0A, 0x33, 0x1C, 0xA6,
- 0xE6, 0xBD, 0x8A, 0xCF, 0x40, 0xA9, 0xB2, 0xFA,
- 0x63, 0x27, 0xFD, 0x9B, 0xD9, 0xFC, 0xD5, 0x87,
- 0x8D, 0x4C, 0xB6, 0xA4, 0xCB, 0xE7, 0x74, 0x55,
- 0xF4, 0xFB, 0x41, 0x25, 0xB5, 0x4B, 0x0A, 0x1B,
- 0xB1, 0xD6, 0xB7, 0xD9, 0x47, 0x2A, 0xC3, 0x98,
- 0x6A, 0xC4, 0x03, 0x73, 0x1F, 0x93, 0x6E, 0x53,
- 0x19, 0x25, 0x64, 0x15, 0x83, 0xF9, 0x73, 0x2A,
- 0x74, 0xB4, 0x93, 0x69, 0xC4, 0x72, 0xFC, 0x26,
- 0xA2, 0x9F, 0x43, 0x45, 0xDD, 0xB9, 0xEF, 0x36,
- 0xC8, 0x3A, 0xCD, 0x99, 0x9B, 0x54, 0x1A, 0x36,
- 0xC1, 0x59, 0xF8, 0x98, 0xA8, 0xCC, 0x28, 0x0D,
- 0x73, 0x4C, 0xEE, 0x98, 0xCB, 0x7C, 0x58, 0x7E,
- 0x20, 0x75, 0x1E, 0xB7, 0xC9, 0xF8, 0xF2, 0x0E,
- 0x63, 0x9E, 0x05, 0x78, 0x1A, 0xB6, 0xA8, 0x7A,
- 0xF9, 0x98, 0x6A, 0xA6, 0x46, 0x84, 0x2E, 0xF6,
- 0x4B, 0xDC, 0x9B, 0x8F, 0x9B, 0x8F, 0xEE, 0xB4,
- 0xAA, 0x3F, 0xEE, 0xC0, 0x37, 0x27, 0x76, 0xC7,
- 0x95, 0xBB, 0x26, 0x74, 0x69, 0x12, 0x7F, 0xF1,
- 0xBB, 0xFF, 0xAE, 0xB5, 0x99, 0x6E, 0xCB, 0x0C
- },
- .len = 512
- },
- .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
- .auth_key = {
- .data = {
- 0xF8, 0x2A, 0xC7, 0x54, 0xDB, 0x96, 0x18, 0xAA,
- 0xC3, 0xA1, 0x53, 0xF6, 0x1F, 0x17, 0x60, 0xBD,
- 0xDE, 0xF4, 0xDE, 0xAD
- },
- .len = 20
- },
- .digest = {
- .data = {
- 0x9A, 0x4F, 0x88, 0x1B, 0xB6, 0x8F, 0xD8, 0x60,
- 0x42, 0x1A, 0x7D, 0x3D, 0xF5, 0x82, 0x80, 0xF1,
- 0x18, 0x8C, 0x1D, 0x32
- },
- .len = 20,
- .truncated_len = 12
- }
-};
-
-/** AES-128-CBC SHA256 test vector */
-static const struct aes_test_data aes_test_data_5 = {
- .crypto_algo = RTE_CRYPTO_CIPHER_AES_CBC,
- .cipher_key = {
- .data = {
- 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
- 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A
- },
- .len = 16
- },
- .iv = {
- .data = {
- 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
- 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
- },
- .len = 16
- },
- .plaintext = {
- .data = {
- "What a lousy earth! He wondered how many people "
- "were destitute that same night even in his own "
- "prosperous country, how many homes were "
- "shanties, how many husbands were drunk and "
- "wives socked, and how many children were "
- "bullied, abused, or abandoned. How many "
- "families hungered for food they could not "
- "afford to buy? How many hearts were broken? How "
- "many suicides would take place that same night, "
- "how many people would go insane? How many "
- "cockroaches and landlords would triumph? How "
- "many winners were losers, successes failures, "
- "and rich men poor men? How many wise guys were "
- "stupid? How many happy endings were unhappy "
- "endings? How many honest men were liars, brave "
- "men cowards, loyal men traitors, how many "
- "sainted men were corrupt, how many people in "
- "positions of trust had sold their souls to "
- "bodyguards, how many had never had souls? How "
- "many straight-and-narrow paths were crooked "
- "paths? How many best families were worst "
- "families and how many good people were bad "
- "people? When you added them all up and then "
- "subtracted, you might be left with only the "
- "children, and perhaps with Albert Einstein and "
- "an old violinist or sculptor somewhere."
- },
- .len = 512
- },
- .ciphertext = {
- .data = {
- 0x8B, 0x4D, 0xDA, 0x1B, 0xCF, 0x04, 0xA0, 0x31,
- 0xB4, 0xBF, 0xBD, 0x68, 0x43, 0x20, 0x7E, 0x76,
- 0xB1, 0x96, 0x8B, 0xA2, 0x7C, 0xA2, 0x83, 0x9E,
- 0x39, 0x5A, 0x2F, 0x7E, 0x92, 0xB4, 0x48, 0x1A,
- 0x3F, 0x6B, 0x5D, 0xDF, 0x52, 0x85, 0x5F, 0x8E,
- 0x42, 0x3C, 0xFB, 0xE9, 0x1A, 0x24, 0xD6, 0x08,
- 0xDD, 0xFD, 0x16, 0xFB, 0xE9, 0x55, 0xEF, 0xF0,
- 0xA0, 0x8D, 0x13, 0xAB, 0x81, 0xC6, 0x90, 0x01,
- 0xB5, 0x18, 0x84, 0xB3, 0xF6, 0xE6, 0x11, 0x57,
- 0xD6, 0x71, 0xC6, 0x3C, 0x3F, 0x2F, 0x33, 0xEE,
- 0x24, 0x42, 0x6E, 0xAC, 0x0B, 0xCA, 0xEC, 0xF9,
- 0x84, 0xF8, 0x22, 0xAA, 0x60, 0xF0, 0x32, 0xA9,
- 0x75, 0x75, 0x3B, 0xCB, 0x70, 0x21, 0x0A, 0x8D,
- 0x0F, 0xE0, 0xC4, 0x78, 0x2B, 0xF8, 0x97, 0xE3,
- 0xE4, 0x26, 0x4B, 0x29, 0xDA, 0x88, 0xCD, 0x46,
- 0xEC, 0xAA, 0xF9, 0x7F, 0xF1, 0x15, 0xEA, 0xC3,
- 0x87, 0xE6, 0x31, 0xF2, 0xCF, 0xDE, 0x4D, 0x80,
- 0x70, 0x91, 0x7E, 0x0C, 0xF7, 0x26, 0x3A, 0x92,
- 0x4F, 0x18, 0x83, 0xC0, 0x8F, 0x59, 0x01, 0xA5,
- 0x88, 0xD1, 0xDB, 0x26, 0x71, 0x27, 0x16, 0xF5,
- 0xEE, 0x10, 0x82, 0xAC, 0x68, 0x26, 0x9B, 0xE2,
- 0x6D, 0xD8, 0x9A, 0x80, 0xDF, 0x04, 0x31, 0xD5,
- 0xF1, 0x35, 0x5C, 0x3B, 0xDD, 0x9A, 0x65, 0xBA,
- 0x58, 0x34, 0x85, 0x61, 0x1C, 0x42, 0x10, 0x76,
- 0x73, 0x02, 0x42, 0xC9, 0x23, 0x18, 0x8E, 0xB4,
- 0x6F, 0xB4, 0xA3, 0x54, 0x6E, 0x88, 0x3B, 0x62,
- 0x7C, 0x02, 0x8D, 0x4C, 0x9F, 0xC8, 0x45, 0xF4,
- 0xC9, 0xDE, 0x4F, 0xEB, 0x22, 0x83, 0x1B, 0xE4,
- 0x49, 0x37, 0xE4, 0xAD, 0xE7, 0xCD, 0x21, 0x54,
- 0xBC, 0x1C, 0xC2, 0x04, 0x97, 0xB4, 0x10, 0x61,
- 0xF0, 0xE4, 0xEF, 0x27, 0x63, 0x3A, 0xDA, 0x91,
- 0x41, 0x25, 0x62, 0x1C, 0x5C, 0xB6, 0x38, 0x4A,
- 0x88, 0x71, 0x59, 0x5A, 0x8D, 0xA0, 0x09, 0xAF,
- 0x72, 0x94, 0xD7, 0x79, 0x5C, 0x60, 0x7C, 0x8F,
- 0x4C, 0xF5, 0xD9, 0xA1, 0x39, 0x6D, 0x81, 0x28,
- 0xEF, 0x13, 0x28, 0xDF, 0xF5, 0x3E, 0xF7, 0x8E,
- 0x09, 0x9C, 0x78, 0x18, 0x79, 0xB8, 0x68, 0xD7,
- 0xA8, 0x29, 0x62, 0xAD, 0xDE, 0xE1, 0x61, 0x76,
- 0x1B, 0x05, 0x16, 0xCD, 0xBF, 0x02, 0x8E, 0xA6,
- 0x43, 0x6E, 0x92, 0x55, 0x4F, 0x60, 0x9C, 0x03,
- 0xB8, 0x4F, 0xA3, 0x02, 0xAC, 0xA8, 0xA7, 0x0C,
- 0x1E, 0xB5, 0x6B, 0xF8, 0xC8, 0x4D, 0xDE, 0xD2,
- 0xB0, 0x29, 0x6E, 0x40, 0xE6, 0xD6, 0xC9, 0xE6,
- 0xB9, 0x0F, 0xB6, 0x63, 0xF5, 0xAA, 0x2B, 0x96,
- 0xA7, 0x16, 0xAC, 0x4E, 0x0A, 0x33, 0x1C, 0xA6,
- 0xE6, 0xBD, 0x8A, 0xCF, 0x40, 0xA9, 0xB2, 0xFA,
- 0x63, 0x27, 0xFD, 0x9B, 0xD9, 0xFC, 0xD5, 0x87,
- 0x8D, 0x4C, 0xB6, 0xA4, 0xCB, 0xE7, 0x74, 0x55,
- 0xF4, 0xFB, 0x41, 0x25, 0xB5, 0x4B, 0x0A, 0x1B,
- 0xB1, 0xD6, 0xB7, 0xD9, 0x47, 0x2A, 0xC3, 0x98,
- 0x6A, 0xC4, 0x03, 0x73, 0x1F, 0x93, 0x6E, 0x53,
- 0x19, 0x25, 0x64, 0x15, 0x83, 0xF9, 0x73, 0x2A,
- 0x74, 0xB4, 0x93, 0x69, 0xC4, 0x72, 0xFC, 0x26,
- 0xA2, 0x9F, 0x43, 0x45, 0xDD, 0xB9, 0xEF, 0x36,
- 0xC8, 0x3A, 0xCD, 0x99, 0x9B, 0x54, 0x1A, 0x36,
- 0xC1, 0x59, 0xF8, 0x98, 0xA8, 0xCC, 0x28, 0x0D,
- 0x73, 0x4C, 0xEE, 0x98, 0xCB, 0x7C, 0x58, 0x7E,
- 0x20, 0x75, 0x1E, 0xB7, 0xC9, 0xF8, 0xF2, 0x0E,
- 0x63, 0x9E, 0x05, 0x78, 0x1A, 0xB6, 0xA8, 0x7A,
- 0xF9, 0x98, 0x6A, 0xA6, 0x46, 0x84, 0x2E, 0xF6,
- 0x4B, 0xDC, 0x9B, 0x8F, 0x9B, 0x8F, 0xEE, 0xB4,
- 0xAA, 0x3F, 0xEE, 0xC0, 0x37, 0x27, 0x76, 0xC7,
- 0x95, 0xBB, 0x26, 0x74, 0x69, 0x12, 0x7F, 0xF1,
- 0xBB, 0xFF, 0xAE, 0xB5, 0x99, 0x6E, 0xCB, 0x0C
- },
- .len = 512
- },
- .auth_algo = RTE_CRYPTO_AUTH_SHA256_HMAC,
- .auth_key = {
- .data = {
- 0x42, 0x1A, 0x7D, 0x3D, 0xF5, 0x82, 0x80, 0xF1,
- 0xF1, 0x35, 0x5C, 0x3B, 0xDD, 0x9A, 0x65, 0xBA,
- 0x58, 0x34, 0x85, 0x61, 0x1C, 0x42, 0x10, 0x76,
- 0x9A, 0x4F, 0x88, 0x1B, 0xB6, 0x8F, 0xD8, 0x60
- },
- .len = 32
- },
- .digest = {
- .data = {
- 0xC8, 0x57, 0x57, 0x31, 0x03, 0xE0, 0x03, 0x55,
- 0x07, 0xC8, 0x9E, 0x7F, 0x48, 0x9A, 0x61, 0x9A,
- 0x68, 0xEE, 0x03, 0x0E, 0x71, 0x75, 0xC7, 0xF4,
- 0x2E, 0x45, 0x26, 0x32, 0x7C, 0x12, 0x15, 0x15
- },
- .len = 32,
- .truncated_len = 16
- }
-};
-
-/** AES-128-CBC SHA512 test vector */
-static const struct aes_test_data aes_test_data_6 = {
- .crypto_algo = RTE_CRYPTO_CIPHER_AES_CBC,
- .cipher_key = {
- .data = {
- 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
- 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A
- },
- .len = 16
- },
- .iv = {
- .data = {
- 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
- 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
- },
- .len = 16
- },
- .plaintext = {
- .data = {
- "What a lousy earth! He wondered how many people "
- "were destitute that same night even in his own "
- "prosperous country, how many homes were "
- "shanties, how many husbands were drunk and "
- "wives socked, and how many children were "
- "bullied, abused, or abandoned. How many "
- "families hungered for food they could not "
- "afford to buy? How many hearts were broken? How "
- "many suicides would take place that same night, "
- "how many people would go insane? How many "
- "cockroaches and landlords would triumph? How "
- "many winners were losers, successes failures, "
- "and rich men poor men? How many wise guys were "
- "stupid? How many happy endings were unhappy "
- "endings? How many honest men were liars, brave "
- "men cowards, loyal men traitors, how many "
- "sainted men were corrupt, how many people in "
- "positions of trust had sold their souls to "
- "bodyguards, how many had never had souls? How "
- "many straight-and-narrow paths were crooked "
- "paths? How many best families were worst "
- "families and how many good people were bad "
- "people? When you added them all up and then "
- "subtracted, you might be left with only the "
- "children, and perhaps with Albert Einstein and "
- "an old violinist or sculptor somewhere."
- },
- .len = 512
- },
- .ciphertext = {
- .data = {
- 0x8B, 0x4D, 0xDA, 0x1B, 0xCF, 0x04, 0xA0, 0x31,
- 0xB4, 0xBF, 0xBD, 0x68, 0x43, 0x20, 0x7E, 0x76,
- 0xB1, 0x96, 0x8B, 0xA2, 0x7C, 0xA2, 0x83, 0x9E,
- 0x39, 0x5A, 0x2F, 0x7E, 0x92, 0xB4, 0x48, 0x1A,
- 0x3F, 0x6B, 0x5D, 0xDF, 0x52, 0x85, 0x5F, 0x8E,
- 0x42, 0x3C, 0xFB, 0xE9, 0x1A, 0x24, 0xD6, 0x08,
- 0xDD, 0xFD, 0x16, 0xFB, 0xE9, 0x55, 0xEF, 0xF0,
- 0xA0, 0x8D, 0x13, 0xAB, 0x81, 0xC6, 0x90, 0x01,
- 0xB5, 0x18, 0x84, 0xB3, 0xF6, 0xE6, 0x11, 0x57,
- 0xD6, 0x71, 0xC6, 0x3C, 0x3F, 0x2F, 0x33, 0xEE,
- 0x24, 0x42, 0x6E, 0xAC, 0x0B, 0xCA, 0xEC, 0xF9,
- 0x84, 0xF8, 0x22, 0xAA, 0x60, 0xF0, 0x32, 0xA9,
- 0x75, 0x75, 0x3B, 0xCB, 0x70, 0x21, 0x0A, 0x8D,
- 0x0F, 0xE0, 0xC4, 0x78, 0x2B, 0xF8, 0x97, 0xE3,
- 0xE4, 0x26, 0x4B, 0x29, 0xDA, 0x88, 0xCD, 0x46,
- 0xEC, 0xAA, 0xF9, 0x7F, 0xF1, 0x15, 0xEA, 0xC3,
- 0x87, 0xE6, 0x31, 0xF2, 0xCF, 0xDE, 0x4D, 0x80,
- 0x70, 0x91, 0x7E, 0x0C, 0xF7, 0x26, 0x3A, 0x92,
- 0x4F, 0x18, 0x83, 0xC0, 0x8F, 0x59, 0x01, 0xA5,
- 0x88, 0xD1, 0xDB, 0x26, 0x71, 0x27, 0x16, 0xF5,
- 0xEE, 0x10, 0x82, 0xAC, 0x68, 0x26, 0x9B, 0xE2,
- 0x6D, 0xD8, 0x9A, 0x80, 0xDF, 0x04, 0x31, 0xD5,
- 0xF1, 0x35, 0x5C, 0x3B, 0xDD, 0x9A, 0x65, 0xBA,
- 0x58, 0x34, 0x85, 0x61, 0x1C, 0x42, 0x10, 0x76,
- 0x73, 0x02, 0x42, 0xC9, 0x23, 0x18, 0x8E, 0xB4,
- 0x6F, 0xB4, 0xA3, 0x54, 0x6E, 0x88, 0x3B, 0x62,
- 0x7C, 0x02, 0x8D, 0x4C, 0x9F, 0xC8, 0x45, 0xF4,
- 0xC9, 0xDE, 0x4F, 0xEB, 0x22, 0x83, 0x1B, 0xE4,
- 0x49, 0x37, 0xE4, 0xAD, 0xE7, 0xCD, 0x21, 0x54,
- 0xBC, 0x1C, 0xC2, 0x04, 0x97, 0xB4, 0x10, 0x61,
- 0xF0, 0xE4, 0xEF, 0x27, 0x63, 0x3A, 0xDA, 0x91,
- 0x41, 0x25, 0x62, 0x1C, 0x5C, 0xB6, 0x38, 0x4A,
- 0x88, 0x71, 0x59, 0x5A, 0x8D, 0xA0, 0x09, 0xAF,
- 0x72, 0x94, 0xD7, 0x79, 0x5C, 0x60, 0x7C, 0x8F,
- 0x4C, 0xF5, 0xD9, 0xA1, 0x39, 0x6D, 0x81, 0x28,
- 0xEF, 0x13, 0x28, 0xDF, 0xF5, 0x3E, 0xF7, 0x8E,
- 0x09, 0x9C, 0x78, 0x18, 0x79, 0xB8, 0x68, 0xD7,
- 0xA8, 0x29, 0x62, 0xAD, 0xDE, 0xE1, 0x61, 0x76,
- 0x1B, 0x05, 0x16, 0xCD, 0xBF, 0x02, 0x8E, 0xA6,
- 0x43, 0x6E, 0x92, 0x55, 0x4F, 0x60, 0x9C, 0x03,
- 0xB8, 0x4F, 0xA3, 0x02, 0xAC, 0xA8, 0xA7, 0x0C,
- 0x1E, 0xB5, 0x6B, 0xF8, 0xC8, 0x4D, 0xDE, 0xD2,
- 0xB0, 0x29, 0x6E, 0x40, 0xE6, 0xD6, 0xC9, 0xE6,
- 0xB9, 0x0F, 0xB6, 0x63, 0xF5, 0xAA, 0x2B, 0x96,
- 0xA7, 0x16, 0xAC, 0x4E, 0x0A, 0x33, 0x1C, 0xA6,
- 0xE6, 0xBD, 0x8A, 0xCF, 0x40, 0xA9, 0xB2, 0xFA,
- 0x63, 0x27, 0xFD, 0x9B, 0xD9, 0xFC, 0xD5, 0x87,
- 0x8D, 0x4C, 0xB6, 0xA4, 0xCB, 0xE7, 0x74, 0x55,
- 0xF4, 0xFB, 0x41, 0x25, 0xB5, 0x4B, 0x0A, 0x1B,
- 0xB1, 0xD6, 0xB7, 0xD9, 0x47, 0x2A, 0xC3, 0x98,
- 0x6A, 0xC4, 0x03, 0x73, 0x1F, 0x93, 0x6E, 0x53,
- 0x19, 0x25, 0x64, 0x15, 0x83, 0xF9, 0x73, 0x2A,
- 0x74, 0xB4, 0x93, 0x69, 0xC4, 0x72, 0xFC, 0x26,
- 0xA2, 0x9F, 0x43, 0x45, 0xDD, 0xB9, 0xEF, 0x36,
- 0xC8, 0x3A, 0xCD, 0x99, 0x9B, 0x54, 0x1A, 0x36,
- 0xC1, 0x59, 0xF8, 0x98, 0xA8, 0xCC, 0x28, 0x0D,
- 0x73, 0x4C, 0xEE, 0x98, 0xCB, 0x7C, 0x58, 0x7E,
- 0x20, 0x75, 0x1E, 0xB7, 0xC9, 0xF8, 0xF2, 0x0E,
- 0x63, 0x9E, 0x05, 0x78, 0x1A, 0xB6, 0xA8, 0x7A,
- 0xF9, 0x98, 0x6A, 0xA6, 0x46, 0x84, 0x2E, 0xF6,
- 0x4B, 0xDC, 0x9B, 0x8F, 0x9B, 0x8F, 0xEE, 0xB4,
- 0xAA, 0x3F, 0xEE, 0xC0, 0x37, 0x27, 0x76, 0xC7,
- 0x95, 0xBB, 0x26, 0x74, 0x69, 0x12, 0x7F, 0xF1,
- 0xBB, 0xFF, 0xAE, 0xB5, 0x99, 0x6E, 0xCB, 0x0C
- },
- .len = 512
- },
- .auth_algo = RTE_CRYPTO_AUTH_SHA512_HMAC,
- .auth_key = {
- .data = {
- 0x42, 0x1A, 0x7D, 0x3D, 0xF5, 0x82, 0x80, 0xF1,
- 0xF1, 0x35, 0x5C, 0x3B, 0xDD, 0x9A, 0x65, 0xBA,
- 0x58, 0x34, 0x85, 0x65, 0x1C, 0x42, 0x50, 0x76,
- 0x9A, 0xAF, 0x88, 0x1B, 0xB6, 0x8F, 0xF8, 0x60,
- 0xA2, 0x5A, 0x7F, 0x3F, 0xF4, 0x72, 0x70, 0xF1,
- 0xF5, 0x35, 0x4C, 0x3B, 0xDD, 0x90, 0x65, 0xB0,
- 0x47, 0x3A, 0x75, 0x61, 0x5C, 0xA2, 0x10, 0x76,
- 0x9A, 0xAF, 0x77, 0x5B, 0xB6, 0x7F, 0xF7, 0x60
- },
- .len = 64
- },
- .digest = {
- .data = {
- 0x5D, 0x54, 0x66, 0xC1, 0x6E, 0xBC, 0x04, 0xB8,
- 0x46, 0xB8, 0x08, 0x6E, 0xE0, 0xF0, 0x43, 0x48,
- 0x37, 0x96, 0x9C, 0xC6, 0x9C, 0xC2, 0x1E, 0xE8,
- 0xF2, 0x0C, 0x0B, 0xEF, 0x86, 0xA2, 0xE3, 0x70,
- 0x95, 0xC8, 0xB3, 0x06, 0x47, 0xA9, 0x90, 0xE8,
- 0xA0, 0xC6, 0x72, 0x69, 0x05, 0xC0, 0x0D, 0x0E,
- 0x21, 0x96, 0x65, 0x93, 0x74, 0x43, 0x2A, 0x1D,
- 0x2E, 0xBF, 0xC2, 0xC2, 0xEE, 0xCC, 0x2F, 0x0A
- },
- .len = 64,
- .truncated_len = 32
- }
-};
-
-/** AES-128-CBC XCBC test vector */
-static const struct aes_test_data aes_test_data_7 = {
- .crypto_algo = RTE_CRYPTO_CIPHER_AES_CBC,
- .cipher_key = {
- .data = {
- 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
- 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A
- },
- .len = 16
- },
- .iv = {
- .data = {
- 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
- 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
- },
- .len = 16
- },
- .plaintext = {
- .data = {
- "What a lousy earth! He wondered how many people "
- "were destitute that same night even in his own "
- "prosperous country, how many homes were "
- "shanties, how many husbands were drunk and "
- "wives socked, and how many children were "
- "bullied, abused, or abandoned. How many "
- "families hungered for food they could not "
- "afford to buy? How many hearts were broken? How "
- "many suicides would take place that same night, "
- "how many people would go insane? How many "
- "cockroaches and landlords would triumph? How "
- "many winners were losers, successes failures, "
- "and rich men poor men? How many wise guys were "
- "stupid? How many happy endings were unhappy "
- "endings? How many honest men were liars, brave "
- "men cowards, loyal men traitors, how many "
- "sainted men were corrupt, how many people in "
- "positions of trust had sold their souls to "
- "bodyguards, how many had never had souls? How "
- "many straight-and-narrow paths were crooked "
- "paths? How many best families were worst "
- "families and how many good people were bad "
- "people? When you added them all up and then "
- "subtracted, you might be left with only the "
- "children, and perhaps with Albert Einstein and "
- "an old violinist or sculptor somewhere."
- },
- .len = 512
- },
- .ciphertext = {
- .data = {
- 0x8B, 0x4D, 0xDA, 0x1B, 0xCF, 0x04, 0xA0, 0x31,
- 0xB4, 0xBF, 0xBD, 0x68, 0x43, 0x20, 0x7E, 0x76,
- 0xB1, 0x96, 0x8B, 0xA2, 0x7C, 0xA2, 0x83, 0x9E,
- 0x39, 0x5A, 0x2F, 0x7E, 0x92, 0xB4, 0x48, 0x1A,
- 0x3F, 0x6B, 0x5D, 0xDF, 0x52, 0x85, 0x5F, 0x8E,
- 0x42, 0x3C, 0xFB, 0xE9, 0x1A, 0x24, 0xD6, 0x08,
- 0xDD, 0xFD, 0x16, 0xFB, 0xE9, 0x55, 0xEF, 0xF0,
- 0xA0, 0x8D, 0x13, 0xAB, 0x81, 0xC6, 0x90, 0x01,
- 0xB5, 0x18, 0x84, 0xB3, 0xF6, 0xE6, 0x11, 0x57,
- 0xD6, 0x71, 0xC6, 0x3C, 0x3F, 0x2F, 0x33, 0xEE,
- 0x24, 0x42, 0x6E, 0xAC, 0x0B, 0xCA, 0xEC, 0xF9,
- 0x84, 0xF8, 0x22, 0xAA, 0x60, 0xF0, 0x32, 0xA9,
- 0x75, 0x75, 0x3B, 0xCB, 0x70, 0x21, 0x0A, 0x8D,
- 0x0F, 0xE0, 0xC4, 0x78, 0x2B, 0xF8, 0x97, 0xE3,
- 0xE4, 0x26, 0x4B, 0x29, 0xDA, 0x88, 0xCD, 0x46,
- 0xEC, 0xAA, 0xF9, 0x7F, 0xF1, 0x15, 0xEA, 0xC3,
- 0x87, 0xE6, 0x31, 0xF2, 0xCF, 0xDE, 0x4D, 0x80,
- 0x70, 0x91, 0x7E, 0x0C, 0xF7, 0x26, 0x3A, 0x92,
- 0x4F, 0x18, 0x83, 0xC0, 0x8F, 0x59, 0x01, 0xA5,
- 0x88, 0xD1, 0xDB, 0x26, 0x71, 0x27, 0x16, 0xF5,
- 0xEE, 0x10, 0x82, 0xAC, 0x68, 0x26, 0x9B, 0xE2,
- 0x6D, 0xD8, 0x9A, 0x80, 0xDF, 0x04, 0x31, 0xD5,
- 0xF1, 0x35, 0x5C, 0x3B, 0xDD, 0x9A, 0x65, 0xBA,
- 0x58, 0x34, 0x85, 0x61, 0x1C, 0x42, 0x10, 0x76,
- 0x73, 0x02, 0x42, 0xC9, 0x23, 0x18, 0x8E, 0xB4,
- 0x6F, 0xB4, 0xA3, 0x54, 0x6E, 0x88, 0x3B, 0x62,
- 0x7C, 0x02, 0x8D, 0x4C, 0x9F, 0xC8, 0x45, 0xF4,
- 0xC9, 0xDE, 0x4F, 0xEB, 0x22, 0x83, 0x1B, 0xE4,
- 0x49, 0x37, 0xE4, 0xAD, 0xE7, 0xCD, 0x21, 0x54,
- 0xBC, 0x1C, 0xC2, 0x04, 0x97, 0xB4, 0x10, 0x61,
- 0xF0, 0xE4, 0xEF, 0x27, 0x63, 0x3A, 0xDA, 0x91,
- 0x41, 0x25, 0x62, 0x1C, 0x5C, 0xB6, 0x38, 0x4A,
- 0x88, 0x71, 0x59, 0x5A, 0x8D, 0xA0, 0x09, 0xAF,
- 0x72, 0x94, 0xD7, 0x79, 0x5C, 0x60, 0x7C, 0x8F,
- 0x4C, 0xF5, 0xD9, 0xA1, 0x39, 0x6D, 0x81, 0x28,
- 0xEF, 0x13, 0x28, 0xDF, 0xF5, 0x3E, 0xF7, 0x8E,
- 0x09, 0x9C, 0x78, 0x18, 0x79, 0xB8, 0x68, 0xD7,
- 0xA8, 0x29, 0x62, 0xAD, 0xDE, 0xE1, 0x61, 0x76,
- 0x1B, 0x05, 0x16, 0xCD, 0xBF, 0x02, 0x8E, 0xA6,
- 0x43, 0x6E, 0x92, 0x55, 0x4F, 0x60, 0x9C, 0x03,
- 0xB8, 0x4F, 0xA3, 0x02, 0xAC, 0xA8, 0xA7, 0x0C,
- 0x1E, 0xB5, 0x6B, 0xF8, 0xC8, 0x4D, 0xDE, 0xD2,
- 0xB0, 0x29, 0x6E, 0x40, 0xE6, 0xD6, 0xC9, 0xE6,
- 0xB9, 0x0F, 0xB6, 0x63, 0xF5, 0xAA, 0x2B, 0x96,
- 0xA7, 0x16, 0xAC, 0x4E, 0x0A, 0x33, 0x1C, 0xA6,
- 0xE6, 0xBD, 0x8A, 0xCF, 0x40, 0xA9, 0xB2, 0xFA,
- 0x63, 0x27, 0xFD, 0x9B, 0xD9, 0xFC, 0xD5, 0x87,
- 0x8D, 0x4C, 0xB6, 0xA4, 0xCB, 0xE7, 0x74, 0x55,
- 0xF4, 0xFB, 0x41, 0x25, 0xB5, 0x4B, 0x0A, 0x1B,
- 0xB1, 0xD6, 0xB7, 0xD9, 0x47, 0x2A, 0xC3, 0x98,
- 0x6A, 0xC4, 0x03, 0x73, 0x1F, 0x93, 0x6E, 0x53,
- 0x19, 0x25, 0x64, 0x15, 0x83, 0xF9, 0x73, 0x2A,
- 0x74, 0xB4, 0x93, 0x69, 0xC4, 0x72, 0xFC, 0x26,
- 0xA2, 0x9F, 0x43, 0x45, 0xDD, 0xB9, 0xEF, 0x36,
- 0xC8, 0x3A, 0xCD, 0x99, 0x9B, 0x54, 0x1A, 0x36,
- 0xC1, 0x59, 0xF8, 0x98, 0xA8, 0xCC, 0x28, 0x0D,
- 0x73, 0x4C, 0xEE, 0x98, 0xCB, 0x7C, 0x58, 0x7E,
- 0x20, 0x75, 0x1E, 0xB7, 0xC9, 0xF8, 0xF2, 0x0E,
- 0x63, 0x9E, 0x05, 0x78, 0x1A, 0xB6, 0xA8, 0x7A,
- 0xF9, 0x98, 0x6A, 0xA6, 0x46, 0x84, 0x2E, 0xF6,
- 0x4B, 0xDC, 0x9B, 0x8F, 0x9B, 0x8F, 0xEE, 0xB4,
- 0xAA, 0x3F, 0xEE, 0xC0, 0x37, 0x27, 0x76, 0xC7,
- 0x95, 0xBB, 0x26, 0x74, 0x69, 0x12, 0x7F, 0xF1,
- 0xBB, 0xFF, 0xAE, 0xB5, 0x99, 0x6E, 0xCB, 0x0C
- },
- .len = 512
- },
- .auth_algo = RTE_CRYPTO_AUTH_AES_XCBC_MAC,
- .auth_key = {
- .data = {
- 0x87, 0x61, 0x54, 0x53, 0xC4, 0x6D, 0xDD, 0x51,
- 0xE1, 0x9F, 0x86, 0x64, 0x39, 0x0A, 0xE6, 0x59
- },
- .len = 16
- },
- .digest = {
- .data = {
- 0xE0, 0xAC, 0x9A, 0xC4, 0x22, 0x64, 0x35, 0x89,
- 0x77, 0x1D, 0x8B, 0x75
- },
- .len = 12,
- .truncated_len = 12
- }
-};
-
-/** AES-128-CBC SHA224 test vector */
-static const struct aes_test_data aes_test_data_8 = {
- .crypto_algo = RTE_CRYPTO_CIPHER_AES_CBC,
- .cipher_key = {
- .data = {
- 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
- 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A
- },
- .len = 16
- },
- .iv = {
- .data = {
- 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
- 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
- },
- .len = 16
- },
- .plaintext = {
- .data = {
- "What a lousy earth! He wondered how many people "
- "were destitute that same night even in his own "
- "prosperous country, how many homes were "
- "shanties, how many husbands were drunk and "
- "wives socked, and how many children were "
- "bullied, abused, or abandoned. How many "
- "families hungered for food they could not "
- "afford to buy? How many hearts were broken? How "
- "many suicides would take place that same night, "
- "how many people would go insane? How many "
- "cockroaches and landlords would triumph? How "
- "many winners were losers, successes failures, "
- "and rich men poor men? How many wise guys were "
- "stupid? How many happy endings were unhappy "
- "endings? How many honest men were liars, brave "
- "men cowards, loyal men traitors, how many "
- "sainted men were corrupt, how many people in "
- "positions of trust had sold their souls to "
- "bodyguards, how many had never had souls? How "
- "many straight-and-narrow paths were crooked "
- "paths? How many best families were worst "
- "families and how many good people were bad "
- "people? When you added them all up and then "
- "subtracted, you might be left with only the "
- "children, and perhaps with Albert Einstein and "
- "an old violinist or sculptor somewhere."
- },
- .len = 512
- },
- .ciphertext = {
- .data = {
- 0x8B, 0x4D, 0xDA, 0x1B, 0xCF, 0x04, 0xA0, 0x31,
- 0xB4, 0xBF, 0xBD, 0x68, 0x43, 0x20, 0x7E, 0x76,
- 0xB1, 0x96, 0x8B, 0xA2, 0x7C, 0xA2, 0x83, 0x9E,
- 0x39, 0x5A, 0x2F, 0x7E, 0x92, 0xB4, 0x48, 0x1A,
- 0x3F, 0x6B, 0x5D, 0xDF, 0x52, 0x85, 0x5F, 0x8E,
- 0x42, 0x3C, 0xFB, 0xE9, 0x1A, 0x24, 0xD6, 0x08,
- 0xDD, 0xFD, 0x16, 0xFB, 0xE9, 0x55, 0xEF, 0xF0,
- 0xA0, 0x8D, 0x13, 0xAB, 0x81, 0xC6, 0x90, 0x01,
- 0xB5, 0x18, 0x84, 0xB3, 0xF6, 0xE6, 0x11, 0x57,
- 0xD6, 0x71, 0xC6, 0x3C, 0x3F, 0x2F, 0x33, 0xEE,
- 0x24, 0x42, 0x6E, 0xAC, 0x0B, 0xCA, 0xEC, 0xF9,
- 0x84, 0xF8, 0x22, 0xAA, 0x60, 0xF0, 0x32, 0xA9,
- 0x75, 0x75, 0x3B, 0xCB, 0x70, 0x21, 0x0A, 0x8D,
- 0x0F, 0xE0, 0xC4, 0x78, 0x2B, 0xF8, 0x97, 0xE3,
- 0xE4, 0x26, 0x4B, 0x29, 0xDA, 0x88, 0xCD, 0x46,
- 0xEC, 0xAA, 0xF9, 0x7F, 0xF1, 0x15, 0xEA, 0xC3,
- 0x87, 0xE6, 0x31, 0xF2, 0xCF, 0xDE, 0x4D, 0x80,
- 0x70, 0x91, 0x7E, 0x0C, 0xF7, 0x26, 0x3A, 0x92,
- 0x4F, 0x18, 0x83, 0xC0, 0x8F, 0x59, 0x01, 0xA5,
- 0x88, 0xD1, 0xDB, 0x26, 0x71, 0x27, 0x16, 0xF5,
- 0xEE, 0x10, 0x82, 0xAC, 0x68, 0x26, 0x9B, 0xE2,
- 0x6D, 0xD8, 0x9A, 0x80, 0xDF, 0x04, 0x31, 0xD5,
- 0xF1, 0x35, 0x5C, 0x3B, 0xDD, 0x9A, 0x65, 0xBA,
- 0x58, 0x34, 0x85, 0x61, 0x1C, 0x42, 0x10, 0x76,
- 0x73, 0x02, 0x42, 0xC9, 0x23, 0x18, 0x8E, 0xB4,
- 0x6F, 0xB4, 0xA3, 0x54, 0x6E, 0x88, 0x3B, 0x62,
- 0x7C, 0x02, 0x8D, 0x4C, 0x9F, 0xC8, 0x45, 0xF4,
- 0xC9, 0xDE, 0x4F, 0xEB, 0x22, 0x83, 0x1B, 0xE4,
- 0x49, 0x37, 0xE4, 0xAD, 0xE7, 0xCD, 0x21, 0x54,
- 0xBC, 0x1C, 0xC2, 0x04, 0x97, 0xB4, 0x10, 0x61,
- 0xF0, 0xE4, 0xEF, 0x27, 0x63, 0x3A, 0xDA, 0x91,
- 0x41, 0x25, 0x62, 0x1C, 0x5C, 0xB6, 0x38, 0x4A,
- 0x88, 0x71, 0x59, 0x5A, 0x8D, 0xA0, 0x09, 0xAF,
- 0x72, 0x94, 0xD7, 0x79, 0x5C, 0x60, 0x7C, 0x8F,
- 0x4C, 0xF5, 0xD9, 0xA1, 0x39, 0x6D, 0x81, 0x28,
- 0xEF, 0x13, 0x28, 0xDF, 0xF5, 0x3E, 0xF7, 0x8E,
- 0x09, 0x9C, 0x78, 0x18, 0x79, 0xB8, 0x68, 0xD7,
- 0xA8, 0x29, 0x62, 0xAD, 0xDE, 0xE1, 0x61, 0x76,
- 0x1B, 0x05, 0x16, 0xCD, 0xBF, 0x02, 0x8E, 0xA6,
- 0x43, 0x6E, 0x92, 0x55, 0x4F, 0x60, 0x9C, 0x03,
- 0xB8, 0x4F, 0xA3, 0x02, 0xAC, 0xA8, 0xA7, 0x0C,
- 0x1E, 0xB5, 0x6B, 0xF8, 0xC8, 0x4D, 0xDE, 0xD2,
- 0xB0, 0x29, 0x6E, 0x40, 0xE6, 0xD6, 0xC9, 0xE6,
- 0xB9, 0x0F, 0xB6, 0x63, 0xF5, 0xAA, 0x2B, 0x96,
- 0xA7, 0x16, 0xAC, 0x4E, 0x0A, 0x33, 0x1C, 0xA6,
- 0xE6, 0xBD, 0x8A, 0xCF, 0x40, 0xA9, 0xB2, 0xFA,
- 0x63, 0x27, 0xFD, 0x9B, 0xD9, 0xFC, 0xD5, 0x87,
- 0x8D, 0x4C, 0xB6, 0xA4, 0xCB, 0xE7, 0x74, 0x55,
- 0xF4, 0xFB, 0x41, 0x25, 0xB5, 0x4B, 0x0A, 0x1B,
- 0xB1, 0xD6, 0xB7, 0xD9, 0x47, 0x2A, 0xC3, 0x98,
- 0x6A, 0xC4, 0x03, 0x73, 0x1F, 0x93, 0x6E, 0x53,
- 0x19, 0x25, 0x64, 0x15, 0x83, 0xF9, 0x73, 0x2A,
- 0x74, 0xB4, 0x93, 0x69, 0xC4, 0x72, 0xFC, 0x26,
- 0xA2, 0x9F, 0x43, 0x45, 0xDD, 0xB9, 0xEF, 0x36,
- 0xC8, 0x3A, 0xCD, 0x99, 0x9B, 0x54, 0x1A, 0x36,
- 0xC1, 0x59, 0xF8, 0x98, 0xA8, 0xCC, 0x28, 0x0D,
- 0x73, 0x4C, 0xEE, 0x98, 0xCB, 0x7C, 0x58, 0x7E,
- 0x20, 0x75, 0x1E, 0xB7, 0xC9, 0xF8, 0xF2, 0x0E,
- 0x63, 0x9E, 0x05, 0x78, 0x1A, 0xB6, 0xA8, 0x7A,
- 0xF9, 0x98, 0x6A, 0xA6, 0x46, 0x84, 0x2E, 0xF6,
- 0x4B, 0xDC, 0x9B, 0x8F, 0x9B, 0x8F, 0xEE, 0xB4,
- 0xAA, 0x3F, 0xEE, 0xC0, 0x37, 0x27, 0x76, 0xC7,
- 0x95, 0xBB, 0x26, 0x74, 0x69, 0x12, 0x7F, 0xF1,
- 0xBB, 0xFF, 0xAE, 0xB5, 0x99, 0x6E, 0xCB, 0x0C
- },
- .len = 512
- },
- .auth_algo = RTE_CRYPTO_AUTH_SHA224_HMAC,
- .auth_key = {
- .data = {
- 0x42, 0x1A, 0x7D, 0x3D, 0xF5, 0x82, 0x80, 0xF1,
- 0xF1, 0x35, 0x5C, 0x3B, 0xDD, 0x9A, 0x65, 0xBA,
- 0x58, 0x34, 0x85, 0x65, 0x1C, 0x42, 0x50, 0x76,
- 0x9A, 0xAF, 0x88, 0x1B, 0xB6, 0x8F, 0xF8, 0x60,
- 0xA2, 0x5A, 0x7F, 0x3F, 0xF4, 0x72, 0x70, 0xF1,
- 0xF5, 0x35, 0x4C, 0x3B, 0xDD, 0x90, 0x65, 0xB0,
- 0x47, 0x3A, 0x75, 0x61, 0x5C, 0xA2, 0x10, 0x76,
- 0x9A, 0xAF, 0x77, 0x5B, 0xB6, 0x7F, 0xF7, 0x60
- },
- .len = 64
- },
- .digest = {
- .data = {
- 0xA3, 0xCA, 0xC7, 0x1D, 0xA8, 0x61, 0x30, 0x98,
- 0x3B, 0x8F, 0x01, 0x19, 0xAE, 0x8D, 0xBD, 0x34,
- 0x40, 0x63, 0xA8, 0x2F, 0xDF, 0x85, 0x2B, 0x7F,
- 0x63, 0x7C, 0xDD, 0xB7
- },
- .len = 28,
- .truncated_len = 14
- }
-};
-
-/** AES-128-CBC SHA384 test vector */
-static const struct aes_test_data aes_test_data_9 = {
- .crypto_algo = RTE_CRYPTO_CIPHER_AES_CBC,
- .cipher_key = {
- .data = {
- 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
- 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A
- },
- .len = 16
- },
- .iv = {
- .data = {
- 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
- 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
- },
- .len = 16
- },
- .plaintext = {
- .data = {
- "What a lousy earth! He wondered how many people "
- "were destitute that same night even in his own "
- "prosperous country, how many homes were "
- "shanties, how many husbands were drunk and "
- "wives socked, and how many children were "
- "bullied, abused, or abandoned. How many "
- "families hungered for food they could not "
- "afford to buy? How many hearts were broken? How "
- "many suicides would take place that same night, "
- "how many people would go insane? How many "
- "cockroaches and landlords would triumph? How "
- "many winners were losers, successes failures, "
- "and rich men poor men? How many wise guys were "
- "stupid? How many happy endings were unhappy "
- "endings? How many honest men were liars, brave "
- "men cowards, loyal men traitors, how many "
- "sainted men were corrupt, how many people in "
- "positions of trust had sold their souls to "
- "bodyguards, how many had never had souls? How "
- "many straight-and-narrow paths were crooked "
- "paths? How many best families were worst "
- "families and how many good people were bad "
- "people? When you added them all up and then "
- "subtracted, you might be left with only the "
- "children, and perhaps with Albert Einstein and "
- "an old violinist or sculptor somewhere."
- },
- .len = 512
- },
- .ciphertext = {
- .data = {
- 0x8B, 0x4D, 0xDA, 0x1B, 0xCF, 0x04, 0xA0, 0x31,
- 0xB4, 0xBF, 0xBD, 0x68, 0x43, 0x20, 0x7E, 0x76,
- 0xB1, 0x96, 0x8B, 0xA2, 0x7C, 0xA2, 0x83, 0x9E,
- 0x39, 0x5A, 0x2F, 0x7E, 0x92, 0xB4, 0x48, 0x1A,
- 0x3F, 0x6B, 0x5D, 0xDF, 0x52, 0x85, 0x5F, 0x8E,
- 0x42, 0x3C, 0xFB, 0xE9, 0x1A, 0x24, 0xD6, 0x08,
- 0xDD, 0xFD, 0x16, 0xFB, 0xE9, 0x55, 0xEF, 0xF0,
- 0xA0, 0x8D, 0x13, 0xAB, 0x81, 0xC6, 0x90, 0x01,
- 0xB5, 0x18, 0x84, 0xB3, 0xF6, 0xE6, 0x11, 0x57,
- 0xD6, 0x71, 0xC6, 0x3C, 0x3F, 0x2F, 0x33, 0xEE,
- 0x24, 0x42, 0x6E, 0xAC, 0x0B, 0xCA, 0xEC, 0xF9,
- 0x84, 0xF8, 0x22, 0xAA, 0x60, 0xF0, 0x32, 0xA9,
- 0x75, 0x75, 0x3B, 0xCB, 0x70, 0x21, 0x0A, 0x8D,
- 0x0F, 0xE0, 0xC4, 0x78, 0x2B, 0xF8, 0x97, 0xE3,
- 0xE4, 0x26, 0x4B, 0x29, 0xDA, 0x88, 0xCD, 0x46,
- 0xEC, 0xAA, 0xF9, 0x7F, 0xF1, 0x15, 0xEA, 0xC3,
- 0x87, 0xE6, 0x31, 0xF2, 0xCF, 0xDE, 0x4D, 0x80,
- 0x70, 0x91, 0x7E, 0x0C, 0xF7, 0x26, 0x3A, 0x92,
- 0x4F, 0x18, 0x83, 0xC0, 0x8F, 0x59, 0x01, 0xA5,
- 0x88, 0xD1, 0xDB, 0x26, 0x71, 0x27, 0x16, 0xF5,
- 0xEE, 0x10, 0x82, 0xAC, 0x68, 0x26, 0x9B, 0xE2,
- 0x6D, 0xD8, 0x9A, 0x80, 0xDF, 0x04, 0x31, 0xD5,
- 0xF1, 0x35, 0x5C, 0x3B, 0xDD, 0x9A, 0x65, 0xBA,
- 0x58, 0x34, 0x85, 0x61, 0x1C, 0x42, 0x10, 0x76,
- 0x73, 0x02, 0x42, 0xC9, 0x23, 0x18, 0x8E, 0xB4,
- 0x6F, 0xB4, 0xA3, 0x54, 0x6E, 0x88, 0x3B, 0x62,
- 0x7C, 0x02, 0x8D, 0x4C, 0x9F, 0xC8, 0x45, 0xF4,
- 0xC9, 0xDE, 0x4F, 0xEB, 0x22, 0x83, 0x1B, 0xE4,
- 0x49, 0x37, 0xE4, 0xAD, 0xE7, 0xCD, 0x21, 0x54,
- 0xBC, 0x1C, 0xC2, 0x04, 0x97, 0xB4, 0x10, 0x61,
- 0xF0, 0xE4, 0xEF, 0x27, 0x63, 0x3A, 0xDA, 0x91,
- 0x41, 0x25, 0x62, 0x1C, 0x5C, 0xB6, 0x38, 0x4A,
- 0x88, 0x71, 0x59, 0x5A, 0x8D, 0xA0, 0x09, 0xAF,
- 0x72, 0x94, 0xD7, 0x79, 0x5C, 0x60, 0x7C, 0x8F,
- 0x4C, 0xF5, 0xD9, 0xA1, 0x39, 0x6D, 0x81, 0x28,
- 0xEF, 0x13, 0x28, 0xDF, 0xF5, 0x3E, 0xF7, 0x8E,
- 0x09, 0x9C, 0x78, 0x18, 0x79, 0xB8, 0x68, 0xD7,
- 0xA8, 0x29, 0x62, 0xAD, 0xDE, 0xE1, 0x61, 0x76,
- 0x1B, 0x05, 0x16, 0xCD, 0xBF, 0x02, 0x8E, 0xA6,
- 0x43, 0x6E, 0x92, 0x55, 0x4F, 0x60, 0x9C, 0x03,
- 0xB8, 0x4F, 0xA3, 0x02, 0xAC, 0xA8, 0xA7, 0x0C,
- 0x1E, 0xB5, 0x6B, 0xF8, 0xC8, 0x4D, 0xDE, 0xD2,
- 0xB0, 0x29, 0x6E, 0x40, 0xE6, 0xD6, 0xC9, 0xE6,
- 0xB9, 0x0F, 0xB6, 0x63, 0xF5, 0xAA, 0x2B, 0x96,
- 0xA7, 0x16, 0xAC, 0x4E, 0x0A, 0x33, 0x1C, 0xA6,
- 0xE6, 0xBD, 0x8A, 0xCF, 0x40, 0xA9, 0xB2, 0xFA,
- 0x63, 0x27, 0xFD, 0x9B, 0xD9, 0xFC, 0xD5, 0x87,
- 0x8D, 0x4C, 0xB6, 0xA4, 0xCB, 0xE7, 0x74, 0x55,
- 0xF4, 0xFB, 0x41, 0x25, 0xB5, 0x4B, 0x0A, 0x1B,
- 0xB1, 0xD6, 0xB7, 0xD9, 0x47, 0x2A, 0xC3, 0x98,
- 0x6A, 0xC4, 0x03, 0x73, 0x1F, 0x93, 0x6E, 0x53,
- 0x19, 0x25, 0x64, 0x15, 0x83, 0xF9, 0x73, 0x2A,
- 0x74, 0xB4, 0x93, 0x69, 0xC4, 0x72, 0xFC, 0x26,
- 0xA2, 0x9F, 0x43, 0x45, 0xDD, 0xB9, 0xEF, 0x36,
- 0xC8, 0x3A, 0xCD, 0x99, 0x9B, 0x54, 0x1A, 0x36,
- 0xC1, 0x59, 0xF8, 0x98, 0xA8, 0xCC, 0x28, 0x0D,
- 0x73, 0x4C, 0xEE, 0x98, 0xCB, 0x7C, 0x58, 0x7E,
- 0x20, 0x75, 0x1E, 0xB7, 0xC9, 0xF8, 0xF2, 0x0E,
- 0x63, 0x9E, 0x05, 0x78, 0x1A, 0xB6, 0xA8, 0x7A,
- 0xF9, 0x98, 0x6A, 0xA6, 0x46, 0x84, 0x2E, 0xF6,
- 0x4B, 0xDC, 0x9B, 0x8F, 0x9B, 0x8F, 0xEE, 0xB4,
- 0xAA, 0x3F, 0xEE, 0xC0, 0x37, 0x27, 0x76, 0xC7,
- 0x95, 0xBB, 0x26, 0x74, 0x69, 0x12, 0x7F, 0xF1,
- 0xBB, 0xFF, 0xAE, 0xB5, 0x99, 0x6E, 0xCB, 0x0C
- },
- .len = 512
- },
- .auth_algo = RTE_CRYPTO_AUTH_SHA384_HMAC,
- .auth_key = {
- .data = {
- 0x42, 0x1A, 0x7D, 0x3D, 0xF5, 0x82, 0x80, 0xF1,
- 0xF1, 0x35, 0x5C, 0x3B, 0xDD, 0x9A, 0x65, 0xBA,
- 0x58, 0x34, 0x85, 0x65, 0x1C, 0x42, 0x50, 0x76,
- 0x9A, 0xAF, 0x88, 0x1B, 0xB6, 0x8F, 0xF8, 0x60,
- 0xA2, 0x5A, 0x7F, 0x3F, 0xF4, 0x72, 0x70, 0xF1,
- 0xF5, 0x35, 0x4C, 0x3B, 0xDD, 0x90, 0x65, 0xB0,
- 0x47, 0x3A, 0x75, 0x61, 0x5C, 0xA2, 0x10, 0x76,
- 0x9A, 0xAF, 0x77, 0x5B, 0xB6, 0x7F, 0xF7, 0x60,
- 0x42, 0x1A, 0x7D, 0x3D, 0xF5, 0x82, 0x80, 0xF1,
- 0xF1, 0x35, 0x5C, 0x3B, 0xDD, 0x9A, 0x65, 0xBA,
- 0x58, 0x34, 0x85, 0x65, 0x1C, 0x42, 0x50, 0x76,
- 0x9A, 0xAF, 0x88, 0x1B, 0xB6, 0x8F, 0xF8, 0x60,
- 0xA2, 0x5A, 0x7F, 0x3F, 0xF4, 0x72, 0x70, 0xF1,
- 0xF5, 0x35, 0x4C, 0x3B, 0xDD, 0x90, 0x65, 0xB0,
- 0x47, 0x3A, 0x75, 0x61, 0x5C, 0xA2, 0x10, 0x76,
- 0x9A, 0xAF, 0x77, 0x5B, 0xB6, 0x7F, 0xF7, 0x60
- },
- .len = 128
- },
- .digest = {
- .data = {
- 0x23, 0x60, 0xC8, 0xB1, 0x2D, 0x6C, 0x1E, 0x72,
- 0x25, 0xAB, 0xF9, 0xC3, 0x9A, 0xA9, 0x4F, 0x8C,
- 0x56, 0x38, 0x65, 0x0E, 0x74, 0xD5, 0x45, 0x9D,
- 0xA3, 0xFD, 0x7E, 0x6D, 0x9E, 0x74, 0x88, 0x9D,
- 0xA7, 0x12, 0x9D, 0xD8, 0x81, 0x3C, 0x86, 0x2F,
- 0x4D, 0xF9, 0x6F, 0x0A, 0xB0, 0xC9, 0xEB, 0x0B
- },
- .len = 48,
- .truncated_len = 24
- }
-};
-
-#endif /* TEST_CRYPTODEV_AES_H_ */
diff --git a/app/test/test_cryptodev_aes_test_vectors.h b/app/test/test_cryptodev_aes_test_vectors.h
new file mode 100644
index 0000000..92c0cc2
--- /dev/null
+++ b/app/test/test_cryptodev_aes_test_vectors.h
@@ -0,0 +1,797 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef TEST_CRYPTODEV_AES_TEST_VECTORS_H_
+#define TEST_CRYPTODEV_AES_TEST_VECTORS_H_
+
+/* test vectors */
+static const uint8_t plaintext_aes128ctr[] = {
+ 0x6B, 0xC1, 0xBE, 0xE2, 0x2E, 0x40, 0x9F, 0x96,
+ 0xE9, 0x3D, 0x7E, 0x11, 0x73, 0x93, 0x17, 0x2A,
+ 0xAE, 0x2D, 0x8A, 0x57, 0x1E, 0x03, 0xAC, 0x9C,
+ 0x9E, 0xB7, 0x6F, 0xAC, 0x45, 0xAF, 0x8E, 0x51,
+ 0x30, 0xC8, 0x1C, 0x46, 0xA3, 0x5C, 0xE4, 0x11,
+ 0xE5, 0xFB, 0xC1, 0x19, 0x1A, 0x0A, 0x52, 0xEF,
+ 0xF6, 0x9F, 0x24, 0x45, 0xDF, 0x4F, 0x9B, 0x17,
+ 0xAD, 0x2B, 0x41, 0x7B, 0xE6, 0x6C, 0x37, 0x10
+};
+
+static const uint8_t ciphertext64_aes128ctr[] = {
+ 0x87, 0x4D, 0x61, 0x91, 0xB6, 0x20, 0xE3, 0x26,
+ 0x1B, 0xEF, 0x68, 0x64, 0x99, 0x0D, 0xB6, 0xCE,
+ 0x98, 0x06, 0xF6, 0x6B, 0x79, 0x70, 0xFD, 0xFF,
+ 0x86, 0x17, 0x18, 0x7B, 0xB9, 0xFF, 0xFD, 0xFF,
+ 0x5A, 0xE4, 0xDF, 0x3E, 0xDB, 0xD5, 0xD3, 0x5E,
+ 0x5B, 0x4F, 0x09, 0x02, 0x0D, 0xB0, 0x3E, 0xAB,
+ 0x1E, 0x03, 0x1D, 0xDA, 0x2F, 0xBE, 0x03, 0xD1,
+ 0x79, 0x21, 0x70, 0xA0, 0xF3, 0x00, 0x9C, 0xEE
+};
+
+static const uint8_t plaintext_aes192ctr[] = {
+ 0x01, 0x0F, 0x10, 0x1F, 0x20, 0x1C, 0x0E, 0xB8,
+ 0xFB, 0x5C, 0xCD, 0xCC, 0x1F, 0xF9, 0xAF, 0x0B,
+ 0x95, 0x03, 0x74, 0x99, 0x49, 0xE7, 0x62, 0x55,
+ 0xDA, 0xEA, 0x13, 0x20, 0x1D, 0xC6, 0xCC, 0xCC,
+ 0xD1, 0x70, 0x75, 0x47, 0x02, 0x2F, 0xFB, 0x86,
+ 0xBB, 0x6B, 0x23, 0xD2, 0xC9, 0x74, 0xD7, 0x7B,
+ 0x08, 0x03, 0x3B, 0x79, 0x39, 0xBB, 0x91, 0x29,
+ 0xDA, 0x14, 0x39, 0x8D, 0xFF, 0x81, 0x50, 0x96,
+};
+
+static const uint8_t ciphertext64_aes192ctr[] = {
+ 0x4A, 0x6C, 0xC8, 0xCC, 0x96, 0x2A, 0x13, 0x84,
+ 0x1C, 0x36, 0x88, 0xE9, 0xE5, 0x94, 0x70, 0xB2,
+ 0x14, 0x5B, 0x13, 0x80, 0xEA, 0xD8, 0x8D, 0x37,
+ 0xFD, 0x70, 0xA8, 0x83, 0xE8, 0x2B, 0x88, 0x1E,
+ 0xBA, 0x94, 0x3F, 0xF6, 0xB3, 0x1F, 0xDE, 0x34,
+ 0xF3, 0x5B, 0x80, 0xE9, 0xAB, 0xF5, 0x1C, 0x29,
+ 0xB6, 0xD9, 0x76, 0x2B, 0x06, 0xC6, 0x74, 0xF1,
+ 0x59, 0x5E, 0x9E, 0xA5, 0x7B, 0x2D, 0xD7, 0xF0
+};
+
+static const uint8_t plaintext_aes256ctr[] = {
+ 0x6B, 0xC1, 0xBE, 0xE2, 0x2E, 0x40, 0x9F, 0x96,
+ 0xE9, 0x3D, 0x7E, 0x11, 0x73, 0x93, 0x17, 0x2A,
+ 0xAE, 0x2D, 0x8A, 0x57, 0x1E, 0x03, 0xAC, 0x9C,
+ 0x9E, 0xB7, 0x6F, 0xAC, 0x45, 0xAF, 0x8E, 0x51,
+ 0x30, 0xC8, 0x1C, 0x46, 0xA3, 0x5C, 0xE4, 0x11,
+ 0xE5, 0xFB, 0xC1, 0x19, 0x1A, 0x0A, 0x52, 0xEF,
+ 0xF6, 0x9F, 0x24, 0x45, 0xDF, 0x4F, 0x9B, 0x17,
+ 0xAD, 0x2B, 0x41, 0x7B, 0xE6, 0x6C, 0x37, 0x10
+};
+
+static const uint8_t ciphertext64_aes256ctr[] = {
+ 0x60, 0x1E, 0xC3, 0x13, 0x77, 0x57, 0x89, 0xA5,
+ 0xB7, 0xA7, 0xF5, 0x04, 0xBB, 0xF3, 0xD2, 0x28,
+ 0xF4, 0x43, 0xE3, 0xCA, 0x4D, 0x62, 0xB5, 0x9A,
+ 0xCA, 0x84, 0xE9, 0x90, 0xCA, 0xCA, 0xF5, 0xC5,
+ 0x2B, 0x09, 0x30, 0xDA, 0xA2, 0x3D, 0xE9, 0x4C,
+ 0xE8, 0x70, 0x17, 0xBA, 0x2D, 0x84, 0x98, 0x8D,
+ 0xDF, 0xC9, 0xC5, 0x8D, 0xB6, 0x7A, 0xAD, 0xA6,
+ 0x13, 0xC2, 0xDD, 0x08, 0x45, 0x79, 0x41, 0xA6
+};
+
+static const uint8_t plaintext_aes_common[] = {
+ "What a lousy earth! He wondered how many people "
+ "were destitute that same night even in his own "
+ "prosperous country, how many homes were "
+ "shanties, how many husbands were drunk and "
+ "wives socked, and how many children were "
+ "bullied, abused, or abandoned. How many "
+ "families hungered for food they could not "
+ "afford to buy? How many hearts were broken? How "
+ "many suicides would take place that same night, "
+ "how many people would go insane? How many "
+ "cockroaches and landlords would triumph? How "
+ "many winners were losers, successes failures, "
+ "and rich men poor men? How many wise guys were "
+ "stupid? How many happy endings were unhappy "
+ "endings? How many honest men were liars, brave "
+ "men cowards, loyal men traitors, how many "
+ "sainted men were corrupt, how many people in "
+ "positions of trust had sold their souls to "
+ "bodyguards, how many had never had souls? How "
+ "many straight-and-narrow paths were crooked "
+ "paths? How many best families were worst "
+ "families and how many good people were bad "
+ "people? When you added them all up and then "
+ "subtracted, you might be left with only the "
+ "children, and perhaps with Albert Einstein and "
+ "an old violinist or sculptor somewhere."
+};
+
+static const uint8_t ciphertext512_aes128cbc[] = {
+ 0x8B, 0x4D, 0xDA, 0x1B, 0xCF, 0x04, 0xA0, 0x31,
+ 0xB4, 0xBF, 0xBD, 0x68, 0x43, 0x20, 0x7E, 0x76,
+ 0xB1, 0x96, 0x8B, 0xA2, 0x7C, 0xA2, 0x83, 0x9E,
+ 0x39, 0x5A, 0x2F, 0x7E, 0x92, 0xB4, 0x48, 0x1A,
+ 0x3F, 0x6B, 0x5D, 0xDF, 0x52, 0x85, 0x5F, 0x8E,
+ 0x42, 0x3C, 0xFB, 0xE9, 0x1A, 0x24, 0xD6, 0x08,
+ 0xDD, 0xFD, 0x16, 0xFB, 0xE9, 0x55, 0xEF, 0xF0,
+ 0xA0, 0x8D, 0x13, 0xAB, 0x81, 0xC6, 0x90, 0x01,
+ 0xB5, 0x18, 0x84, 0xB3, 0xF6, 0xE6, 0x11, 0x57,
+ 0xD6, 0x71, 0xC6, 0x3C, 0x3F, 0x2F, 0x33, 0xEE,
+ 0x24, 0x42, 0x6E, 0xAC, 0x0B, 0xCA, 0xEC, 0xF9,
+ 0x84, 0xF8, 0x22, 0xAA, 0x60, 0xF0, 0x32, 0xA9,
+ 0x75, 0x75, 0x3B, 0xCB, 0x70, 0x21, 0x0A, 0x8D,
+ 0x0F, 0xE0, 0xC4, 0x78, 0x2B, 0xF8, 0x97, 0xE3,
+ 0xE4, 0x26, 0x4B, 0x29, 0xDA, 0x88, 0xCD, 0x46,
+ 0xEC, 0xAA, 0xF9, 0x7F, 0xF1, 0x15, 0xEA, 0xC3,
+ 0x87, 0xE6, 0x31, 0xF2, 0xCF, 0xDE, 0x4D, 0x80,
+ 0x70, 0x91, 0x7E, 0x0C, 0xF7, 0x26, 0x3A, 0x92,
+ 0x4F, 0x18, 0x83, 0xC0, 0x8F, 0x59, 0x01, 0xA5,
+ 0x88, 0xD1, 0xDB, 0x26, 0x71, 0x27, 0x16, 0xF5,
+ 0xEE, 0x10, 0x82, 0xAC, 0x68, 0x26, 0x9B, 0xE2,
+ 0x6D, 0xD8, 0x9A, 0x80, 0xDF, 0x04, 0x31, 0xD5,
+ 0xF1, 0x35, 0x5C, 0x3B, 0xDD, 0x9A, 0x65, 0xBA,
+ 0x58, 0x34, 0x85, 0x61, 0x1C, 0x42, 0x10, 0x76,
+ 0x73, 0x02, 0x42, 0xC9, 0x23, 0x18, 0x8E, 0xB4,
+ 0x6F, 0xB4, 0xA3, 0x54, 0x6E, 0x88, 0x3B, 0x62,
+ 0x7C, 0x02, 0x8D, 0x4C, 0x9F, 0xC8, 0x45, 0xF4,
+ 0xC9, 0xDE, 0x4F, 0xEB, 0x22, 0x83, 0x1B, 0xE4,
+ 0x49, 0x37, 0xE4, 0xAD, 0xE7, 0xCD, 0x21, 0x54,
+ 0xBC, 0x1C, 0xC2, 0x04, 0x97, 0xB4, 0x10, 0x61,
+ 0xF0, 0xE4, 0xEF, 0x27, 0x63, 0x3A, 0xDA, 0x91,
+ 0x41, 0x25, 0x62, 0x1C, 0x5C, 0xB6, 0x38, 0x4A,
+ 0x88, 0x71, 0x59, 0x5A, 0x8D, 0xA0, 0x09, 0xAF,
+ 0x72, 0x94, 0xD7, 0x79, 0x5C, 0x60, 0x7C, 0x8F,
+ 0x4C, 0xF5, 0xD9, 0xA1, 0x39, 0x6D, 0x81, 0x28,
+ 0xEF, 0x13, 0x28, 0xDF, 0xF5, 0x3E, 0xF7, 0x8E,
+ 0x09, 0x9C, 0x78, 0x18, 0x79, 0xB8, 0x68, 0xD7,
+ 0xA8, 0x29, 0x62, 0xAD, 0xDE, 0xE1, 0x61, 0x76,
+ 0x1B, 0x05, 0x16, 0xCD, 0xBF, 0x02, 0x8E, 0xA6,
+ 0x43, 0x6E, 0x92, 0x55, 0x4F, 0x60, 0x9C, 0x03,
+ 0xB8, 0x4F, 0xA3, 0x02, 0xAC, 0xA8, 0xA7, 0x0C,
+ 0x1E, 0xB5, 0x6B, 0xF8, 0xC8, 0x4D, 0xDE, 0xD2,
+ 0xB0, 0x29, 0x6E, 0x40, 0xE6, 0xD6, 0xC9, 0xE6,
+ 0xB9, 0x0F, 0xB6, 0x63, 0xF5, 0xAA, 0x2B, 0x96,
+ 0xA7, 0x16, 0xAC, 0x4E, 0x0A, 0x33, 0x1C, 0xA6,
+ 0xE6, 0xBD, 0x8A, 0xCF, 0x40, 0xA9, 0xB2, 0xFA,
+ 0x63, 0x27, 0xFD, 0x9B, 0xD9, 0xFC, 0xD5, 0x87,
+ 0x8D, 0x4C, 0xB6, 0xA4, 0xCB, 0xE7, 0x74, 0x55,
+ 0xF4, 0xFB, 0x41, 0x25, 0xB5, 0x4B, 0x0A, 0x1B,
+ 0xB1, 0xD6, 0xB7, 0xD9, 0x47, 0x2A, 0xC3, 0x98,
+ 0x6A, 0xC4, 0x03, 0x73, 0x1F, 0x93, 0x6E, 0x53,
+ 0x19, 0x25, 0x64, 0x15, 0x83, 0xF9, 0x73, 0x2A,
+ 0x74, 0xB4, 0x93, 0x69, 0xC4, 0x72, 0xFC, 0x26,
+ 0xA2, 0x9F, 0x43, 0x45, 0xDD, 0xB9, 0xEF, 0x36,
+ 0xC8, 0x3A, 0xCD, 0x99, 0x9B, 0x54, 0x1A, 0x36,
+ 0xC1, 0x59, 0xF8, 0x98, 0xA8, 0xCC, 0x28, 0x0D,
+ 0x73, 0x4C, 0xEE, 0x98, 0xCB, 0x7C, 0x58, 0x7E,
+ 0x20, 0x75, 0x1E, 0xB7, 0xC9, 0xF8, 0xF2, 0x0E,
+ 0x63, 0x9E, 0x05, 0x78, 0x1A, 0xB6, 0xA8, 0x7A,
+ 0xF9, 0x98, 0x6A, 0xA6, 0x46, 0x84, 0x2E, 0xF6,
+ 0x4B, 0xDC, 0x9B, 0x8F, 0x9B, 0x8F, 0xEE, 0xB4,
+ 0xAA, 0x3F, 0xEE, 0xC0, 0x37, 0x27, 0x76, 0xC7,
+ 0x95, 0xBB, 0x26, 0x74, 0x69, 0x12, 0x7F, 0xF1,
+ 0xBB, 0xFF, 0xAE, 0xB5, 0x99, 0x6E, 0xCB, 0x0C
+};
+
+/* AES128-CTR-SHA1 test vector */
+static const struct blockcipher_test_data aes_test_data_1 = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_AES_CTR,
+ .cipher_key = {
+ .data = {
+ 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6,
+ 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C
+ },
+ .len = 16
+ },
+ .iv = {
+ .data = {
+ 0xF0, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7,
+ 0xF8, 0xF9, 0xFA, 0xFB, 0xFC, 0xFD, 0xFE, 0xFF
+ },
+ .len = 16
+ },
+ .plaintext = {
+ .data = plaintext_aes128ctr,
+ .len = 64
+ },
+ .ciphertext = {
+ .data = ciphertext64_aes128ctr,
+ .len = 64
+ },
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .auth_key = {
+ .data = {
+ 0xF8, 0x2A, 0xC7, 0x54, 0xDB, 0x96, 0x18, 0xAA,
+ 0xC3, 0xA1, 0x53, 0xF6, 0x1F, 0x17, 0x60, 0xBD,
+ 0xDE, 0xF4, 0xDE, 0xAD
+ },
+ .len = 20
+ },
+ .digest = {
+ .data = {
+ 0x9B, 0x6F, 0x0C, 0x43, 0xF5, 0xC1, 0x3E, 0xB0,
+ 0xB1, 0x70, 0xB8, 0x2B, 0x33, 0x09, 0xD2, 0xB2,
+ 0x56, 0x20, 0xFB, 0xFE
+ },
+ .len = 20,
+ .truncated_len = 12
+ }
+};
+
+/** AES-192-CTR XCBC test vector */
+static const struct blockcipher_test_data aes_test_data_2 = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_AES_CTR,
+ .cipher_key = {
+ .data = {
+ 0xCB, 0xC5, 0xED, 0x5B, 0xE7, 0x7C, 0xBD, 0x8C,
+ 0x50, 0xD9, 0x30, 0xF2, 0xB5, 0x6A, 0x0E, 0x5F,
+ 0xAA, 0xAE, 0xAD, 0xA2, 0x1F, 0x49, 0x52, 0xD4
+ },
+ .len = 24
+ },
+ .iv = {
+ .data = {
+ 0x3F, 0x69, 0xA8, 0xCD, 0xE8, 0xF0, 0xEF, 0x40,
+ 0xB8, 0x7A, 0x4B, 0xED, 0x2B, 0xAF, 0xBF, 0x57
+ },
+ .len = 16
+ },
+ .plaintext = {
+ .data = plaintext_aes192ctr,
+ .len = 64
+ },
+ .ciphertext = {
+ .data = ciphertext64_aes192ctr,
+ .len = 64
+ },
+ .auth_algo = RTE_CRYPTO_AUTH_AES_XCBC_MAC,
+ .auth_key = {
+ .data = {
+ 0x87, 0x61, 0x54, 0x53, 0xC4, 0x6D, 0xDD, 0x51,
+ 0xE1, 0x9F, 0x86, 0x64, 0x39, 0x0A, 0xE6, 0x59
+ },
+ .len = 16
+ },
+ .digest = {
+ .data = {
+ 0xCA, 0x33, 0xB3, 0x3B, 0x16, 0x94, 0xAA, 0x55,
+ 0x36, 0x6B, 0x45, 0x46
+ },
+ .len = 12,
+ .truncated_len = 12
+ }
+};
+
+/** AES-256-CTR SHA1 test vector */
+static const struct blockcipher_test_data aes_test_data_3 = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_AES_CTR,
+ .cipher_key = {
+ .data = {
+ 0x60, 0x3D, 0xEB, 0x10, 0x15, 0xCA, 0x71, 0xBE,
+ 0x2B, 0x73, 0xAE, 0xF0, 0x85, 0x7D, 0x77, 0x81,
+ 0x1F, 0x35, 0x2C, 0x07, 0x3B, 0x61, 0x08, 0xD7,
+ 0x2D, 0x98, 0x10, 0xA3, 0x09, 0x14, 0xDF, 0xF4
+ },
+ .len = 32
+ },
+ .iv = {
+ .data = {
+ 0xF0, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7,
+ 0xF8, 0xF9, 0xFA, 0xFB, 0xFC, 0xFD, 0xFE, 0xFF
+ },
+ .len = 16
+ },
+ .plaintext = {
+ .data = plaintext_aes256ctr,
+ .len = 64
+ },
+ .ciphertext = {
+ .data = ciphertext64_aes256ctr,
+ .len = 64
+ },
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .auth_key = {
+ .data = {
+ 0xF8, 0x2A, 0xC7, 0x54, 0xDB, 0x96, 0x18, 0xAA,
+ 0xC3, 0xA1, 0x53, 0xF6, 0x1F, 0x17, 0x60, 0xBD,
+ 0xDE, 0xF4, 0xDE, 0xAD
+ },
+ .len = 20
+ },
+ .digest = {
+ .data = {
+ 0x3B, 0x1A, 0x9D, 0x82, 0x35, 0xD5, 0xDD, 0x64,
+ 0xCC, 0x1B, 0xA9, 0xC0, 0xEB, 0xE9, 0x42, 0x16,
+ 0xE7, 0x87, 0xA3, 0xEF
+ },
+ .len = 20,
+ .truncated_len = 12
+ }
+};
+
+/** AES-128-CBC SHA1 test vector */
+static const struct blockcipher_test_data aes_test_data_4 = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .cipher_key = {
+ .data = {
+ 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
+ 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A
+ },
+ .len = 16
+ },
+ .iv = {
+ .data = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
+ },
+ .len = 16
+ },
+ .plaintext = {
+ .data = plaintext_aes_common,
+ .len = 512
+ },
+ .ciphertext = {
+ .data = ciphertext512_aes128cbc,
+ .len = 512
+ },
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .auth_key = {
+ .data = {
+ 0xF8, 0x2A, 0xC7, 0x54, 0xDB, 0x96, 0x18, 0xAA,
+ 0xC3, 0xA1, 0x53, 0xF6, 0x1F, 0x17, 0x60, 0xBD,
+ 0xDE, 0xF4, 0xDE, 0xAD
+ },
+ .len = 20
+ },
+ .digest = {
+ .data = {
+ 0x9A, 0x4F, 0x88, 0x1B, 0xB6, 0x8F, 0xD8, 0x60,
+ 0x42, 0x1A, 0x7D, 0x3D, 0xF5, 0x82, 0x80, 0xF1,
+ 0x18, 0x8C, 0x1D, 0x32
+ },
+ .len = 20,
+ .truncated_len = 12
+ }
+};
+
+/** AES-128-CBC SHA256 test vector */
+static const struct blockcipher_test_data aes_test_data_5 = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .cipher_key = {
+ .data = {
+ 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
+ 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A
+ },
+ .len = 16
+ },
+ .iv = {
+ .data = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
+ },
+ .len = 16
+ },
+ .plaintext = {
+ .data = plaintext_aes_common,
+ .len = 512
+ },
+ .ciphertext = {
+ .data = ciphertext512_aes128cbc,
+ .len = 512
+ },
+ .auth_algo = RTE_CRYPTO_AUTH_SHA256_HMAC,
+ .auth_key = {
+ .data = {
+ 0x42, 0x1A, 0x7D, 0x3D, 0xF5, 0x82, 0x80, 0xF1,
+ 0xF1, 0x35, 0x5C, 0x3B, 0xDD, 0x9A, 0x65, 0xBA,
+ 0x58, 0x34, 0x85, 0x61, 0x1C, 0x42, 0x10, 0x76,
+ 0x9A, 0x4F, 0x88, 0x1B, 0xB6, 0x8F, 0xD8, 0x60
+ },
+ .len = 32
+ },
+ .digest = {
+ .data = {
+ 0xC8, 0x57, 0x57, 0x31, 0x03, 0xE0, 0x03, 0x55,
+ 0x07, 0xC8, 0x9E, 0x7F, 0x48, 0x9A, 0x61, 0x9A,
+ 0x68, 0xEE, 0x03, 0x0E, 0x71, 0x75, 0xC7, 0xF4,
+ 0x2E, 0x45, 0x26, 0x32, 0x7C, 0x12, 0x15, 0x15
+ },
+ .len = 32,
+ .truncated_len = 16
+ }
+};
+
+/** AES-128-CBC SHA512 test vector */
+static const struct blockcipher_test_data aes_test_data_6 = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .cipher_key = {
+ .data = {
+ 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
+ 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A
+ },
+ .len = 16
+ },
+ .iv = {
+ .data = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
+ },
+ .len = 16
+ },
+ .plaintext = {
+ .data = plaintext_aes_common,
+ .len = 512
+ },
+ .ciphertext = {
+ .data = ciphertext512_aes128cbc,
+ .len = 512
+ },
+ .auth_algo = RTE_CRYPTO_AUTH_SHA512_HMAC,
+ .auth_key = {
+ .data = {
+ 0x42, 0x1A, 0x7D, 0x3D, 0xF5, 0x82, 0x80, 0xF1,
+ 0xF1, 0x35, 0x5C, 0x3B, 0xDD, 0x9A, 0x65, 0xBA,
+ 0x58, 0x34, 0x85, 0x65, 0x1C, 0x42, 0x50, 0x76,
+ 0x9A, 0xAF, 0x88, 0x1B, 0xB6, 0x8F, 0xF8, 0x60,
+ 0xA2, 0x5A, 0x7F, 0x3F, 0xF4, 0x72, 0x70, 0xF1,
+ 0xF5, 0x35, 0x4C, 0x3B, 0xDD, 0x90, 0x65, 0xB0,
+ 0x47, 0x3A, 0x75, 0x61, 0x5C, 0xA2, 0x10, 0x76,
+ 0x9A, 0xAF, 0x77, 0x5B, 0xB6, 0x7F, 0xF7, 0x60
+ },
+ .len = 64
+ },
+ .digest = {
+ .data = {
+ 0x5D, 0x54, 0x66, 0xC1, 0x6E, 0xBC, 0x04, 0xB8,
+ 0x46, 0xB8, 0x08, 0x6E, 0xE0, 0xF0, 0x43, 0x48,
+ 0x37, 0x96, 0x9C, 0xC6, 0x9C, 0xC2, 0x1E, 0xE8,
+ 0xF2, 0x0C, 0x0B, 0xEF, 0x86, 0xA2, 0xE3, 0x70,
+ 0x95, 0xC8, 0xB3, 0x06, 0x47, 0xA9, 0x90, 0xE8,
+ 0xA0, 0xC6, 0x72, 0x69, 0x05, 0xC0, 0x0D, 0x0E,
+ 0x21, 0x96, 0x65, 0x93, 0x74, 0x43, 0x2A, 0x1D,
+ 0x2E, 0xBF, 0xC2, 0xC2, 0xEE, 0xCC, 0x2F, 0x0A
+ },
+ .len = 64,
+ .truncated_len = 32
+ }
+};
+
+/** AES-128-CBC XCBC test vector */
+static const struct blockcipher_test_data aes_test_data_7 = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .cipher_key = {
+ .data = {
+ 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
+ 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A
+ },
+ .len = 16
+ },
+ .iv = {
+ .data = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
+ },
+ .len = 16
+ },
+ .plaintext = {
+ .data = plaintext_aes_common,
+ .len = 512
+ },
+ .ciphertext = {
+ .data = ciphertext512_aes128cbc,
+ .len = 512
+ },
+ .auth_algo = RTE_CRYPTO_AUTH_AES_XCBC_MAC,
+ .auth_key = {
+ .data = {
+ 0x87, 0x61, 0x54, 0x53, 0xC4, 0x6D, 0xDD, 0x51,
+ 0xE1, 0x9F, 0x86, 0x64, 0x39, 0x0A, 0xE6, 0x59
+ },
+ .len = 16
+ },
+ .digest = {
+ .data = {
+ 0xE0, 0xAC, 0x9A, 0xC4, 0x22, 0x64, 0x35, 0x89,
+ 0x77, 0x1D, 0x8B, 0x75
+ },
+ .len = 12,
+ .truncated_len = 12
+ }
+};
+
+/** AES-128-CBC SHA224 test vector */
+static const struct blockcipher_test_data aes_test_data_8 = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .cipher_key = {
+ .data = {
+ 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
+ 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A
+ },
+ .len = 16
+ },
+ .iv = {
+ .data = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
+ },
+ .len = 16
+ },
+ .plaintext = {
+ .data = plaintext_aes_common,
+ .len = 512
+ },
+ .ciphertext = {
+ .data = ciphertext512_aes128cbc,
+ .len = 512
+ },
+ .auth_algo = RTE_CRYPTO_AUTH_SHA224_HMAC,
+ .auth_key = {
+ .data = {
+ 0x42, 0x1A, 0x7D, 0x3D, 0xF5, 0x82, 0x80, 0xF1,
+ 0xF1, 0x35, 0x5C, 0x3B, 0xDD, 0x9A, 0x65, 0xBA,
+ 0x58, 0x34, 0x85, 0x65, 0x1C, 0x42, 0x50, 0x76,
+ 0x9A, 0xAF, 0x88, 0x1B, 0xB6, 0x8F, 0xF8, 0x60,
+ 0xA2, 0x5A, 0x7F, 0x3F, 0xF4, 0x72, 0x70, 0xF1,
+ 0xF5, 0x35, 0x4C, 0x3B, 0xDD, 0x90, 0x65, 0xB0,
+ 0x47, 0x3A, 0x75, 0x61, 0x5C, 0xA2, 0x10, 0x76,
+ 0x9A, 0xAF, 0x77, 0x5B, 0xB6, 0x7F, 0xF7, 0x60
+ },
+ .len = 64
+ },
+ .digest = {
+ .data = {
+ 0xA3, 0xCA, 0xC7, 0x1D, 0xA8, 0x61, 0x30, 0x98,
+ 0x3B, 0x8F, 0x01, 0x19, 0xAE, 0x8D, 0xBD, 0x34,
+ 0x40, 0x63, 0xA8, 0x2F, 0xDF, 0x85, 0x2B, 0x7F,
+ 0x63, 0x7C, 0xDD, 0xB7
+ },
+ .len = 28,
+ .truncated_len = 14
+ }
+};
+
+/** AES-128-CBC SHA384 test vector */
+static const struct blockcipher_test_data aes_test_data_9 = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .cipher_key = {
+ .data = {
+ 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
+ 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A
+ },
+ .len = 16
+ },
+ .iv = {
+ .data = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
+ },
+ .len = 16
+ },
+ .plaintext = {
+ .data = plaintext_aes_common,
+ .len = 512
+ },
+ .ciphertext = {
+ .data = ciphertext512_aes128cbc,
+ .len = 512
+ },
+ .auth_algo = RTE_CRYPTO_AUTH_SHA384_HMAC,
+ .auth_key = {
+ .data = {
+ 0x42, 0x1A, 0x7D, 0x3D, 0xF5, 0x82, 0x80, 0xF1,
+ 0xF1, 0x35, 0x5C, 0x3B, 0xDD, 0x9A, 0x65, 0xBA,
+ 0x58, 0x34, 0x85, 0x65, 0x1C, 0x42, 0x50, 0x76,
+ 0x9A, 0xAF, 0x88, 0x1B, 0xB6, 0x8F, 0xF8, 0x60,
+ 0xA2, 0x5A, 0x7F, 0x3F, 0xF4, 0x72, 0x70, 0xF1,
+ 0xF5, 0x35, 0x4C, 0x3B, 0xDD, 0x90, 0x65, 0xB0,
+ 0x47, 0x3A, 0x75, 0x61, 0x5C, 0xA2, 0x10, 0x76,
+ 0x9A, 0xAF, 0x77, 0x5B, 0xB6, 0x7F, 0xF7, 0x60,
+ 0x42, 0x1A, 0x7D, 0x3D, 0xF5, 0x82, 0x80, 0xF1,
+ 0xF1, 0x35, 0x5C, 0x3B, 0xDD, 0x9A, 0x65, 0xBA,
+ 0x58, 0x34, 0x85, 0x65, 0x1C, 0x42, 0x50, 0x76,
+ 0x9A, 0xAF, 0x88, 0x1B, 0xB6, 0x8F, 0xF8, 0x60,
+ 0xA2, 0x5A, 0x7F, 0x3F, 0xF4, 0x72, 0x70, 0xF1,
+ 0xF5, 0x35, 0x4C, 0x3B, 0xDD, 0x90, 0x65, 0xB0,
+ 0x47, 0x3A, 0x75, 0x61, 0x5C, 0xA2, 0x10, 0x76,
+ 0x9A, 0xAF, 0x77, 0x5B, 0xB6, 0x7F, 0xF7, 0x60
+ },
+ .len = 128
+ },
+ .digest = {
+ .data = {
+ 0x23, 0x60, 0xC8, 0xB1, 0x2D, 0x6C, 0x1E, 0x72,
+ 0x25, 0xAB, 0xF9, 0xC3, 0x9A, 0xA9, 0x4F, 0x8C,
+ 0x56, 0x38, 0x65, 0x0E, 0x74, 0xD5, 0x45, 0x9D,
+ 0xA3, 0xFD, 0x7E, 0x6D, 0x9E, 0x74, 0x88, 0x9D,
+ 0xA7, 0x12, 0x9D, 0xD8, 0x81, 0x3C, 0x86, 0x2F,
+ 0x4D, 0xF9, 0x6F, 0x0A, 0xB0, 0xC9, 0xEB, 0x0B
+ },
+ .len = 48,
+ .truncated_len = 24
+ }
+};
+
+static const struct blockcipher_test_case aes_chain_test_cases[] = {
+ {
+ .test_descr = "AES-128-CTR HMAC-SHA1 Encryption Digest",
+ .test_data = &aes_test_data_1,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-128-CTR HMAC-SHA1 Decryption Digest "
+ "Verify",
+ .test_data = &aes_test_data_1,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-192-CTR XCBC Encryption Digest",
+ .test_data = &aes_test_data_2,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-192-CTR XCBC Decryption Digest Verify",
+ .test_data = &aes_test_data_2,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-256-CTR HMAC-SHA1 Encryption Digest",
+ .test_data = &aes_test_data_3,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-256-CTR HMAC-SHA1 Decryption Digest "
+ "Verify",
+ .test_data = &aes_test_data_3,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-128-CBC HMAC-SHA1 Encryption Digest",
+ .test_data = &aes_test_data_4,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-128-CBC HMAC-SHA1 Decryption Digest "
+ "Verify",
+ .test_data = &aes_test_data_4,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-128-CBC HMAC-SHA256 Encryption Digest",
+ .test_data = &aes_test_data_5,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-128-CBC HMAC-SHA256 Decryption Digest "
+ "Verify",
+ .test_data = &aes_test_data_5,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-128-CBC HMAC-SHA512 Encryption Digest",
+ .test_data = &aes_test_data_6,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-128-CBC HMAC-SHA512 Encryption Digest "
+ "Sessionless",
+ .test_data = &aes_test_data_6,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
+ .feature_mask = BLOCKCIPHER_TEST_FEATURE_SESSIONLESS,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB
+ },
+ {
+ .test_descr = "AES-128-CBC HMAC-SHA512 Decryption Digest "
+ "Verify",
+ .test_data = &aes_test_data_6,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-128-CBC XCBC Encryption Digest",
+ .test_data = &aes_test_data_7,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-128-CBC XCBC Decryption Digest Verify",
+ .test_data = &aes_test_data_7,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-128-CBC HMAC-SHA1 Encryption Digest "
+ "OOP",
+ .test_data = &aes_test_data_4,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
+ .feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-128-CBC HMAC-SHA1 Decryption Digest "
+ "Verify OOP",
+ .test_data = &aes_test_data_4,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
+ .feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-128-CBC HMAC-SHA224 Encryption Digest",
+ .test_data = &aes_test_data_8,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-128-CBC HMAC-SHA224 Decryption Digest "
+ "Verify",
+ .test_data = &aes_test_data_8,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-128-CBC HMAC-SHA384 Encryption Digest",
+ .test_data = &aes_test_data_9,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-128-CBC HMAC-SHA384 Decryption Digest "
+ "Verify",
+ .test_data = &aes_test_data_9,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+};
+
+#endif /* TEST_CRYPTODEV_AES_TEST_VECTORS_H_ */
diff --git a/app/test/test_cryptodev_blockcipher.c b/app/test/test_cryptodev_blockcipher.c
new file mode 100644
index 0000000..a1d8c8b
--- /dev/null
+++ b/app/test/test_cryptodev_blockcipher.c
@@ -0,0 +1,516 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015-2016 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_common.h>
+#include <rte_hexdump.h>
+#include <rte_mbuf.h>
+#include <rte_malloc.h>
+#include <rte_memcpy.h>
+
+#include <rte_crypto.h>
+#include <rte_cryptodev.h>
+#include <rte_cryptodev_pmd.h>
+
+#include "test.h"
+#include "test_cryptodev_blockcipher.h"
+#include "test_cryptodev_aes_test_vectors.h"
+
+static int
+test_blockcipher_one_case(const struct blockcipher_test_case *t,
+ struct rte_mempool *mbuf_pool,
+ struct rte_mempool *op_mpool,
+ uint8_t dev_id,
+ enum rte_cryptodev_type cryptodev_type,
+ char *test_msg)
+{
+ struct rte_mbuf *ibuf = NULL;
+ struct rte_mbuf *obuf = NULL;
+ struct rte_mbuf *iobuf;
+ struct rte_crypto_sym_xform *cipher_xform = NULL;
+ struct rte_crypto_sym_xform *auth_xform = NULL;
+ struct rte_crypto_sym_xform *init_xform = NULL;
+ struct rte_crypto_sym_op *sym_op = NULL;
+ struct rte_crypto_op *op = NULL;
+ struct rte_cryptodev_sym_session *sess = NULL;
+
+ int status = TEST_SUCCESS;
+ const struct blockcipher_test_data *tdata = t->test_data;
+ uint8_t cipher_key[tdata->cipher_key.len];
+ uint8_t auth_key[tdata->auth_key.len];
+ uint32_t buf_len = tdata->ciphertext.len;
+ uint32_t digest_len = 0;
+ char *buf_p = NULL;
+
+ if (tdata->cipher_key.len)
+ memcpy(cipher_key, tdata->cipher_key.data,
+ tdata->cipher_key.len);
+ if (tdata->auth_key.len)
+ memcpy(auth_key, tdata->auth_key.data,
+ tdata->auth_key.len);
+
+ switch (cryptodev_type) {
+ case RTE_CRYPTODEV_QAT_SYM_PMD:
+ digest_len = tdata->digest.len;
+ break;
+ case RTE_CRYPTODEV_AESNI_MB_PMD:
+ digest_len = tdata->digest.truncated_len;
+ break;
+ default:
+ snprintf(test_msg, BLOCKCIPHER_TEST_MSG_LEN,
+ "line %u FAILED: %s",
+ __LINE__, "Unsupported PMD type");
+ status = TEST_FAILED;
+ goto error_exit;
+ }
+
+ /* preparing data */
+ ibuf = rte_pktmbuf_alloc(mbuf_pool);
+ if (!ibuf) {
+ snprintf(test_msg, BLOCKCIPHER_TEST_MSG_LEN,
+ "line %u FAILED: %s",
+ __LINE__, "Allocation of rte_mbuf failed");
+ status = TEST_FAILED;
+ goto error_exit;
+ }
+
+ if (t->op_mask & BLOCKCIPHER_TEST_OP_CIPHER)
+ buf_len += tdata->iv.len;
+ if (t->op_mask & BLOCKCIPHER_TEST_OP_AUTH)
+ buf_len += digest_len;
+
+ buf_p = rte_pktmbuf_append(ibuf, buf_len);
+ if (!buf_p) {
+ snprintf(test_msg, BLOCKCIPHER_TEST_MSG_LEN,
+ "line %u FAILED: %s",
+ __LINE__, "No room to append mbuf");
+ status = TEST_FAILED;
+ goto error_exit;
+ }
+
+ if (t->op_mask & BLOCKCIPHER_TEST_OP_CIPHER) {
+ rte_memcpy(buf_p, tdata->iv.data, tdata->iv.len);
+ buf_p += tdata->iv.len;
+ }
+
+ /* only encryption requires plaintext.data input,
+ * decryption/(digest gen)/(digest verify) use ciphertext.data
+ * to be computed
+ */
+ if (t->op_mask & BLOCKCIPHER_TEST_OP_ENCRYPT) {
+ rte_memcpy(buf_p, tdata->plaintext.data,
+ tdata->plaintext.len);
+ buf_p += tdata->plaintext.len;
+ } else {
+ rte_memcpy(buf_p, tdata->ciphertext.data,
+ tdata->ciphertext.len);
+ buf_p += tdata->ciphertext.len;
+ }
+
+ if (t->op_mask & BLOCKCIPHER_TEST_OP_AUTH_VERIFY)
+ rte_memcpy(buf_p, tdata->digest.data, digest_len);
+ else
+ memset(buf_p, 0, digest_len);
+
+ if (t->feature_mask & BLOCKCIPHER_TEST_FEATURE_OOP) {
+ obuf = rte_pktmbuf_alloc(mbuf_pool);
+ if (!obuf) {
+ snprintf(test_msg, BLOCKCIPHER_TEST_MSG_LEN, "line %u "
+ "FAILED: %s", __LINE__,
+ "Allocation of rte_mbuf failed");
+ status = TEST_FAILED;
+ goto error_exit;
+ }
+
+ buf_p = rte_pktmbuf_append(obuf, buf_len);
+ if (!buf_p) {
+ snprintf(test_msg, BLOCKCIPHER_TEST_MSG_LEN, "line %u "
+ "FAILED: %s", __LINE__,
+ "No room to append mbuf");
+ status = TEST_FAILED;
+ goto error_exit;
+ }
+ memset(buf_p, 0, buf_len);
+ }
+
+ /* Generate Crypto op data structure */
+ op = rte_crypto_op_alloc(op_mpool, RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+ if (!op) {
+ snprintf(test_msg, BLOCKCIPHER_TEST_MSG_LEN,
+ "line %u FAILED: %s",
+ __LINE__, "Failed to allocate symmetric crypto "
+ "operation struct");
+ status = TEST_FAILED;
+ goto error_exit;
+ }
+
+ sym_op = op->sym;
+
+ sym_op->m_src = ibuf;
+
+ if (t->feature_mask & BLOCKCIPHER_TEST_FEATURE_OOP) {
+ sym_op->m_dst = obuf;
+ iobuf = obuf;
+ } else {
+ sym_op->m_dst = NULL;
+ iobuf = ibuf;
+ }
+
+ /* sessionless op requires allocate xform using
+ * rte_crypto_op_sym_xforms_alloc(), otherwise rte_zmalloc()
+ * is used
+ */
+ if (t->feature_mask & BLOCKCIPHER_TEST_FEATURE_SESSIONLESS) {
+ uint32_t n_xforms = 0;
+
+ if (t->op_mask & BLOCKCIPHER_TEST_OP_CIPHER)
+ n_xforms++;
+ if (t->op_mask & BLOCKCIPHER_TEST_OP_AUTH)
+ n_xforms++;
+
+ if (rte_crypto_op_sym_xforms_alloc(op, n_xforms)
+ == NULL) {
+ snprintf(test_msg, BLOCKCIPHER_TEST_MSG_LEN, "line %u "
+ "FAILED: %s", __LINE__, "Failed to "
+ "allocate space for crypto transforms");
+ status = TEST_FAILED;
+ goto error_exit;
+ }
+ } else {
+ cipher_xform = rte_zmalloc(NULL,
+ sizeof(struct rte_crypto_sym_xform), 0);
+
+ auth_xform = rte_zmalloc(NULL,
+ sizeof(struct rte_crypto_sym_xform), 0);
+
+ if (!cipher_xform || !auth_xform) {
+ snprintf(test_msg, BLOCKCIPHER_TEST_MSG_LEN, "line %u "
+ "FAILED: %s", __LINE__, "Failed to "
+ "allocate memory for crypto transforms");
+ status = TEST_FAILED;
+ goto error_exit;
+ }
+ }
+
+ /* preparing xform, for sessioned op, init_xform is initialized
+ * here and later as param in rte_cryptodev_sym_session_create() call
+ */
+ if (t->op_mask == BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN) {
+ if (t->feature_mask & BLOCKCIPHER_TEST_FEATURE_SESSIONLESS) {
+ cipher_xform = op->sym->xform;
+ auth_xform = cipher_xform->next;
+ auth_xform->next = NULL;
+ } else {
+ cipher_xform->next = auth_xform;
+ auth_xform->next = NULL;
+ init_xform = cipher_xform;
+ }
+ } else if (t->op_mask == BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC) {
+ if (t->feature_mask & BLOCKCIPHER_TEST_FEATURE_SESSIONLESS) {
+ auth_xform = op->sym->xform;
+ cipher_xform = auth_xform->next;
+ cipher_xform->next = NULL;
+ } else {
+ auth_xform->next = cipher_xform;
+ cipher_xform->next = NULL;
+ init_xform = auth_xform;
+ }
+ } else if ((t->op_mask == BLOCKCIPHER_TEST_OP_ENCRYPT) ||
+ (t->op_mask == BLOCKCIPHER_TEST_OP_DECRYPT)) {
+ if (t->feature_mask & BLOCKCIPHER_TEST_FEATURE_SESSIONLESS)
+ cipher_xform = op->sym->xform;
+ else
+ init_xform = cipher_xform;
+ cipher_xform->next = NULL;
+ } else if ((t->op_mask == BLOCKCIPHER_TEST_OP_AUTH_GEN) ||
+ (t->op_mask == BLOCKCIPHER_TEST_OP_AUTH_VERIFY)) {
+ if (t->feature_mask & BLOCKCIPHER_TEST_FEATURE_SESSIONLESS)
+ auth_xform = op->sym->xform;
+ else
+ init_xform = auth_xform;
+ auth_xform->next = NULL;
+ } else {
+ snprintf(test_msg, BLOCKCIPHER_TEST_MSG_LEN,
+ "line %u FAILED: %s",
+ __LINE__, "Unrecognized operation");
+ status = TEST_FAILED;
+ goto error_exit;
+ }
+
+ /*configure xforms & sym_op cipher and auth data*/
+ if (t->op_mask & BLOCKCIPHER_TEST_OP_CIPHER) {
+ cipher_xform->type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+ cipher_xform->cipher.algo = tdata->crypto_algo;
+ if (t->op_mask & BLOCKCIPHER_TEST_OP_ENCRYPT)
+ cipher_xform->cipher.op =
+ RTE_CRYPTO_CIPHER_OP_ENCRYPT;
+ else
+ cipher_xform->cipher.op =
+ RTE_CRYPTO_CIPHER_OP_DECRYPT;
+ cipher_xform->cipher.key.data = cipher_key;
+ cipher_xform->cipher.key.length = tdata->cipher_key.len;
+
+ sym_op->cipher.data.offset = tdata->iv.len;
+ sym_op->cipher.data.length = tdata->ciphertext.len;
+ sym_op->cipher.iv.data = rte_pktmbuf_mtod(sym_op->m_src,
+ uint8_t *);
+ sym_op->cipher.iv.length = tdata->iv.len;
+ sym_op->cipher.iv.phys_addr = rte_pktmbuf_mtophys(
+ sym_op->m_src);
+ }
+
+ if (t->op_mask & BLOCKCIPHER_TEST_OP_AUTH) {
+ uint32_t auth_data_offset = 0;
+ uint32_t digest_offset = tdata->ciphertext.len;
+
+ if (t->op_mask & BLOCKCIPHER_TEST_OP_CIPHER) {
+ digest_offset += tdata->iv.len;
+ auth_data_offset += tdata->iv.len;
+ }
+
+ auth_xform->type = RTE_CRYPTO_SYM_XFORM_AUTH;
+ auth_xform->auth.algo = tdata->auth_algo;
+ auth_xform->auth.key.length = tdata->auth_key.len;
+ auth_xform->auth.key.data = auth_key;
+ auth_xform->auth.digest_length = digest_len;
+
+ if (t->op_mask & BLOCKCIPHER_TEST_OP_AUTH_GEN) {
+ auth_xform->auth.op = RTE_CRYPTO_AUTH_OP_GENERATE;
+ sym_op->auth.digest.data = rte_pktmbuf_mtod_offset
+ (iobuf, uint8_t *, digest_offset);
+ sym_op->auth.digest.phys_addr =
+ rte_pktmbuf_mtophys_offset(iobuf,
+ digest_offset);
+ } else {
+ auth_xform->auth.op = RTE_CRYPTO_AUTH_OP_VERIFY;
+ sym_op->auth.digest.data = rte_pktmbuf_mtod_offset
+ (sym_op->m_src, uint8_t *, digest_offset);
+ sym_op->auth.digest.phys_addr =
+ rte_pktmbuf_mtophys_offset(sym_op->m_src,
+ digest_offset);
+ }
+
+ sym_op->auth.data.offset = auth_data_offset;
+ sym_op->auth.data.length = tdata->ciphertext.len;
+ sym_op->auth.digest.length = digest_len;
+ }
+
+ /* create session for sessioned op */
+ if (!(t->feature_mask & BLOCKCIPHER_TEST_FEATURE_SESSIONLESS)) {
+ sess = rte_cryptodev_sym_session_create(dev_id,
+ init_xform);
+ if (!sess) {
+ snprintf(test_msg, BLOCKCIPHER_TEST_MSG_LEN, "line %u "
+ "FAILED: %s", __LINE__,
+ "Session creation failed");
+ status = TEST_FAILED;
+ goto error_exit;
+ }
+
+ /* attach symmetric crypto session to crypto operations */
+ rte_crypto_op_attach_sym_session(op, sess);
+ }
+
+ /* Process crypto operation */
+ if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
+ snprintf(test_msg, BLOCKCIPHER_TEST_MSG_LEN,
+ "line %u FAILED: %s",
+ __LINE__, "Error sending packet for encryption");
+ status = TEST_FAILED;
+ goto error_exit;
+ }
+
+ op = NULL;
+
+ while (rte_cryptodev_dequeue_burst(dev_id, 0, &op, 1) == 0)
+ rte_pause();
+
+ if (!op) {
+ snprintf(test_msg, BLOCKCIPHER_TEST_MSG_LEN,
+ "line %u FAILED: %s",
+ __LINE__, "Failed to process sym crypto op");
+ status = TEST_FAILED;
+ goto error_exit;
+ }
+
+ TEST_HEXDUMP(stdout, "m_src:",
+ rte_pktmbuf_mtod(sym_op->m_src, uint8_t *), buf_len);
+ if (t->feature_mask & BLOCKCIPHER_TEST_FEATURE_OOP)
+ TEST_HEXDUMP(stdout, "m_dst:",
+ rte_pktmbuf_mtod(sym_op->m_dst, uint8_t *),
+ buf_len);
+
+ /* Verify results */
+ if (op->status != RTE_CRYPTO_OP_STATUS_SUCCESS) {
+ if (t->op_mask & BLOCKCIPHER_TEST_OP_AUTH_VERIFY)
+ snprintf(test_msg, BLOCKCIPHER_TEST_MSG_LEN, "line %u "
+ "FAILED: Digest verification failed "
+ "(0x%X)", __LINE__, op->status);
+ else
+ snprintf(test_msg, BLOCKCIPHER_TEST_MSG_LEN, "line %u "
+ "FAILED: Digest verification failed "
+ "(0x%X)", __LINE__, op->status);
+ status = TEST_FAILED;
+ goto error_exit;
+ }
+
+ if (t->op_mask & BLOCKCIPHER_TEST_OP_CIPHER) {
+ uint8_t *crypto_res;
+ const uint8_t *compare_ref;
+ uint32_t compare_len;
+
+ crypto_res = rte_pktmbuf_mtod_offset(iobuf, uint8_t *,
+ tdata->iv.len);
+
+ if (t->op_mask & BLOCKCIPHER_TEST_OP_ENCRYPT) {
+ compare_ref = tdata->ciphertext.data;
+ compare_len = tdata->ciphertext.len;
+ } else {
+ compare_ref = tdata->plaintext.data;
+ compare_len = tdata->plaintext.len;
+ }
+
+ if (memcmp(crypto_res, compare_ref, compare_len)) {
+ snprintf(test_msg, BLOCKCIPHER_TEST_MSG_LEN, "line %u "
+ "FAILED: %s", __LINE__,
+ "Crypto data not as expected");
+ status = TEST_FAILED;
+ goto error_exit;
+ }
+ }
+
+ if (t->op_mask & BLOCKCIPHER_TEST_OP_AUTH_GEN) {
+ uint8_t *auth_res;
+
+ if (t->op_mask & BLOCKCIPHER_TEST_OP_CIPHER)
+ auth_res = rte_pktmbuf_mtod_offset(iobuf,
+ uint8_t *,
+ tdata->iv.len + tdata->ciphertext.len);
+ else
+ auth_res = rte_pktmbuf_mtod_offset(iobuf,
+ uint8_t *, tdata->ciphertext.len);
+
+ if (memcmp(auth_res, tdata->digest.data, digest_len)) {
+ snprintf(test_msg, BLOCKCIPHER_TEST_MSG_LEN, "line %u "
+ "FAILED: %s", __LINE__, "Generated "
+ "digest data not as expected");
+ status = TEST_FAILED;
+ goto error_exit;
+ }
+ }
+
+ snprintf(test_msg, BLOCKCIPHER_TEST_MSG_LEN, "PASS");
+
+error_exit:
+ if (!(t->feature_mask & BLOCKCIPHER_TEST_FEATURE_SESSIONLESS)) {
+ if (sess)
+ rte_cryptodev_sym_session_free(dev_id, sess);
+ if (cipher_xform)
+ rte_free(cipher_xform);
+ if (auth_xform)
+ rte_free(auth_xform);
+ }
+
+ if (op)
+ rte_crypto_op_free(op);
+
+ if (obuf)
+ rte_pktmbuf_free(obuf);
+
+ if (ibuf)
+ rte_pktmbuf_free(ibuf);
+
+ return status;
+}
+
+int
+test_blockcipher_all_tests(struct rte_mempool *mbuf_pool,
+ struct rte_mempool *op_mpool,
+ uint8_t dev_id,
+ enum rte_cryptodev_type cryptodev_type,
+ enum blockcipher_test_type test_type)
+{
+ int status, overall_status = TEST_SUCCESS;
+ uint32_t i, test_index = 0;
+ char test_msg[BLOCKCIPHER_TEST_MSG_LEN + 1];
+ uint32_t n_test_cases = 0;
+ uint32_t target_pmd_mask = 0;
+ const struct blockcipher_test_case *tcs = NULL;
+
+ switch (test_type) {
+ case BLKCIPHER_AES_CHAIN_TYPE:
+ n_test_cases = sizeof(aes_chain_test_cases) /
+ sizeof(aes_chain_test_cases[0]);
+ tcs = aes_chain_test_cases;
+ break;
+ case BLKCIPHER_AES_CIPHERONLY_TYPE:
+ case BLKCIPHER_3DES_CHAIN_TYPE:
+ case BLKCIPHER_3DES_CIPHERONLY_TYPE:
+ case BLKCIPHER_AUTHONLY_TYPE:
+ default:
+ break;
+ }
+
+ switch (cryptodev_type) {
+ case RTE_CRYPTODEV_AESNI_MB_PMD:
+ target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB;
+ break;
+ case RTE_CRYPTODEV_QAT_SYM_PMD:
+ target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT;
+ break;
+ default:
+ TEST_ASSERT(0, "Unrecognized cryptodev type");
+ break;
+ }
+
+ for (i = 0; i < n_test_cases; i++) {
+ const struct blockcipher_test_case *tc = &tcs[i];
+
+ if (!(tc->pmd_mask & target_pmd_mask))
+ continue;
+
+ status = test_blockcipher_one_case(tc, mbuf_pool, op_mpool,
+ dev_id, cryptodev_type, test_msg);
+
+ printf(" %u) TestCase %s %s\n", test_index ++,
+ tc->test_descr, test_msg);
+
+ if (status != TEST_SUCCESS) {
+ if (overall_status == TEST_SUCCESS)
+ overall_status = status;
+
+ if (tc->feature_mask & BLOCKCIPHER_TEST_FEATURE_STOPPER)
+ break;
+ }
+ }
+
+ return overall_status;
+}
diff --git a/app/test/test_cryptodev_blockcipher.h b/app/test/test_cryptodev_blockcipher.h
new file mode 100644
index 0000000..3e25d4d
--- /dev/null
+++ b/app/test/test_cryptodev_blockcipher.h
@@ -0,0 +1,124 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef TEST_CRYPTODEV_BLOCKCIPHER_H_
+#define TEST_CRYPTODEV_BLOCKCIPHER_H_
+
+#ifndef BLOCKCIPHER_TEST_MSG_LEN
+#define BLOCKCIPHER_TEST_MSG_LEN 256
+#endif
+
+#define BLOCKCIPHER_TEST_OP_ENCRYPT 0x01
+#define BLOCKCIPHER_TEST_OP_DECRYPT 0x02
+#define BLOCKCIPHER_TEST_OP_AUTH_GEN 0x04
+#define BLOCKCIPHER_TEST_OP_AUTH_VERIFY 0x08
+
+#define BLOCKCIPHER_TEST_FEATURE_OOP 0x01
+#define BLOCKCIPHER_TEST_FEATURE_SESSIONLESS 0x02
+#define BLOCKCIPHER_TEST_FEATURE_STOPPER 0x04 /* stop upon failing */
+
+#define BLOCKCIPHER_TEST_TARGET_PMD_MB 0x0001 /* Multi-buffer flag */
+#define BLOCKCIPHER_TEST_TARGET_PMD_QAT 0x0002 /* QAT flag */
+
+#define BLOCKCIPHER_TEST_OP_CIPHER (BLOCKCIPHER_TEST_OP_ENCRYPT | \
+ BLOCKCIPHER_TEST_OP_DECRYPT)
+
+#define BLOCKCIPHER_TEST_OP_AUTH (BLOCKCIPHER_TEST_OP_AUTH_GEN | \
+ BLOCKCIPHER_TEST_OP_AUTH_VERIFY)
+
+#define BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN (BLOCKCIPHER_TEST_OP_ENCRYPT | \
+ BLOCKCIPHER_TEST_OP_AUTH_GEN)
+
+#define BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC (BLOCKCIPHER_TEST_OP_DECRYPT | \
+ BLOCKCIPHER_TEST_OP_AUTH_VERIFY)
+
+enum blockcipher_test_type {
+ BLKCIPHER_AES_CHAIN_TYPE, /* use aes_chain_test_cases[] */
+ BLKCIPHER_AES_CIPHERONLY_TYPE, /* use aes_cipheronly_test_cases[] */
+ BLKCIPHER_3DES_CHAIN_TYPE, /* use triple_des_chain_test_cases[] */
+ BLKCIPHER_3DES_CIPHERONLY_TYPE, /* triple_des_cipheronly_test_cases[] */
+ BLKCIPHER_AUTHONLY_TYPE /* use hash_test_cases[] */
+};
+
+struct blockcipher_test_case {
+ const char *test_descr; /* test description */
+ const struct blockcipher_test_data *test_data;
+ uint8_t op_mask; /* operation mask */
+ uint8_t feature_mask;
+ uint32_t pmd_mask;
+};
+
+struct blockcipher_test_data {
+ enum rte_crypto_cipher_algorithm crypto_algo;
+
+ struct {
+ uint8_t data[64];
+ unsigned int len;
+ } cipher_key;
+
+ struct {
+ uint8_t data[64] __rte_aligned(16);
+ unsigned int len;
+ } iv;
+
+ struct {
+ const uint8_t *data;
+ unsigned int len;
+ } plaintext;
+
+ struct {
+ const uint8_t *data;
+ unsigned int len;
+ } ciphertext;
+
+ enum rte_crypto_auth_algorithm auth_algo;
+
+ struct {
+ uint8_t data[128];
+ unsigned int len;
+ } auth_key;
+
+ struct {
+ uint8_t data[128];
+ unsigned int len; /* for qat */
+ unsigned int truncated_len; /* for mb */
+ } digest;
+};
+
+int
+test_blockcipher_all_tests(struct rte_mempool *mbuf_pool,
+ struct rte_mempool *op_mpool,
+ uint8_t dev_id,
+ enum rte_cryptodev_type cryptodev_type,
+ enum blockcipher_test_type test_type);
+
+#endif /* TEST_CRYPTODEV_BLOCKCIPHER_H_ */
--
2.5.0
^ permalink raw reply related
* [PATCH v6 3/4] app/test: added tests for libcrypto PMD
From: Slawomir Mrozowicz @ 2016-10-04 15:11 UTC (permalink / raw)
To: dev; +Cc: Slawomir Mrozowicz, Piotr Azarewicz, Marcin Kerlin,
Daniel Mrzyglod
In-Reply-To: <1475593882-32364-1-git-send-email-slawomirx.mrozowicz@intel.com>
This patch contains unit tests for libcrypto PMD. User can
use app/test application to check how to use this pmd and to
verify crypto processing.
Test name is cryptodev_libcrypto_autotest.
For performance test cryptodev_libcrypto_perftest can be used.
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com>
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
---
v2:
- rename AES-named functions to blockcipher
- replace different test cases with blockcipher functions pattern
- add 3DES tests into QuickAssist PMD testsuite
v3:
- add nagative verification tests
- add big data test
v4:
- move aes test rework to another patch
- move big data test to another patch
- checking if libcrypto pmd is available
v5:
- add reduced big data test
v6:
- fix checkpatch warnings
---
app/test/test_cryptodev.c | 1505 ++++++++++++++++++++++++++-
app/test/test_cryptodev.h | 1 +
app/test/test_cryptodev_aes_test_vectors.h | 306 +++++-
app/test/test_cryptodev_blockcipher.c | 22 +
app/test/test_cryptodev_blockcipher.h | 1 +
app/test/test_cryptodev_des_test_vectors.h | 955 +++++++++++++++++
app/test/test_cryptodev_gcm_test_vectors.h | 36 +-
app/test/test_cryptodev_hash_test_vectors.h | 491 +++++++++
app/test/test_cryptodev_perf.c | 712 ++++++++++++-
9 files changed, 3954 insertions(+), 75 deletions(-)
create mode 100644 app/test/test_cryptodev_des_test_vectors.h
create mode 100644 app/test/test_cryptodev_hash_test_vectors.h
diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
index 8f03157..9767704 100644
--- a/app/test/test_cryptodev.c
+++ b/app/test/test_cryptodev.c
@@ -45,6 +45,8 @@
#include "test_cryptodev_blockcipher.h"
#include "test_cryptodev_aes_test_vectors.h"
+#include "test_cryptodev_des_test_vectors.h"
+#include "test_cryptodev_hash_test_vectors.h"
#include "test_cryptodev_kasumi_test_vectors.h"
#include "test_cryptodev_kasumi_hash_test_vectors.h"
#include "test_cryptodev_snow3g_test_vectors.h"
@@ -167,7 +169,7 @@ testsuite_setup(void)
/* Not already created so create */
ts_params->mbuf_pool = rte_pktmbuf_pool_create(
"CRYPTO_MBUFPOOL",
- NUM_MBUFS, MBUF_CACHE_SIZE, 0, MBUF_SIZE,
+ NUM_MBUFS, MBUF_CACHE_SIZE, 0, UINT16_MAX,
rte_socket_id());
if (ts_params->mbuf_pool == NULL) {
RTE_LOG(ERR, USER1, "Can't create CRYPTO_MBUFPOOL\n");
@@ -308,6 +310,28 @@ testsuite_setup(void)
}
}
+ /* Create 2 LIBCRYPTO devices if required */
+ if (gbl_cryptodev_type == RTE_CRYPTODEV_LIBCRYPTO_PMD) {
+#ifndef RTE_LIBRTE_PMD_LIBCRYPTO
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
+ nb_devs = rte_cryptodev_count_devtype(
+ RTE_CRYPTODEV_LIBCRYPTO_PMD);
+ if (nb_devs < 2) {
+ for (i = nb_devs; i < 2; i++) {
+ ret = rte_eal_vdev_init(
+ RTE_STR(CRYPTODEV_NAME_LIBCRYPTO_PMD),
+ NULL);
+
+ TEST_ASSERT(ret == 0, "Failed to create "
+ "instance %u of pmd : %s", i,
+ RTE_STR(CRYPTODEV_NAME_LIBCRYPTO_PMD));
+ }
+ }
+ }
+
#ifndef RTE_LIBRTE_PMD_QAT
if (gbl_cryptodev_type == RTE_CRYPTODEV_QAT_SYM_PMD) {
RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_QAT must be enabled "
@@ -877,6 +901,315 @@ static const uint8_t catch_22_quote_2_512_bytes_AES_CBC_HMAC_SHA1_digest[] = {
0x18, 0x8c, 0x1d, 0x32
};
+
+/* Multisession Vector context Test */
+/*Begin Session 0 */
+static uint8_t ms_aes_cbc_key0[] = {
+ 0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7,
+ 0xf8, 0xf9, 0xfa, 0xfb, 0xfc, 0xfd, 0xfe, 0xff
+};
+
+static uint8_t ms_aes_cbc_iv0[] = {
+ 0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7,
+ 0xf8, 0xf9, 0xfa, 0xfb, 0xfc, 0xfd, 0xfe, 0xff
+};
+
+static const uint8_t ms_aes_cbc_cipher0[] = {
+ 0x3C, 0xE4, 0xEE, 0x42, 0xB6, 0x9B, 0xC3, 0x38,
+ 0x5F, 0xAD, 0x54, 0xDC, 0xA8, 0x32, 0x81, 0xDC,
+ 0x7A, 0x6F, 0x85, 0x58, 0x07, 0x35, 0xED, 0xEB,
+ 0xAD, 0x79, 0x79, 0x96, 0xD3, 0x0E, 0xA6, 0xD9,
+ 0xAA, 0x86, 0xA4, 0x8F, 0xB5, 0xD6, 0x6E, 0x6D,
+ 0x0C, 0x91, 0x2F, 0xC4, 0x67, 0x98, 0x0E, 0xC4,
+ 0x8D, 0x83, 0x68, 0x69, 0xC4, 0xD3, 0x94, 0x34,
+ 0xC4, 0x5D, 0x60, 0x55, 0x22, 0x87, 0x8F, 0x6F,
+ 0x17, 0x8E, 0x75, 0xE4, 0x02, 0xF5, 0x1B, 0x99,
+ 0xC8, 0x39, 0xA9, 0xAB, 0x23, 0x91, 0x12, 0xED,
+ 0x08, 0xE7, 0xD9, 0x25, 0x89, 0x24, 0x4F, 0x8D,
+ 0x68, 0xF3, 0x10, 0x39, 0x0A, 0xEE, 0x45, 0x24,
+ 0xDF, 0x7A, 0x9D, 0x00, 0x25, 0xE5, 0x35, 0x71,
+ 0x4E, 0x40, 0x59, 0x6F, 0x0A, 0x13, 0xB3, 0x72,
+ 0x1D, 0x98, 0x63, 0x94, 0x89, 0xA5, 0x39, 0x8E,
+ 0xD3, 0x9C, 0x8A, 0x7F, 0x71, 0x2F, 0xC7, 0xCD,
+ 0x81, 0x05, 0xDC, 0xC0, 0x8D, 0xCE, 0x6D, 0x18,
+ 0x30, 0xC4, 0x72, 0x51, 0xF0, 0x27, 0xC8, 0xF6,
+ 0x60, 0x5B, 0x7C, 0xB2, 0xE3, 0x49, 0x0C, 0x29,
+ 0xC6, 0x9F, 0x39, 0x57, 0x80, 0x55, 0x24, 0x2C,
+ 0x9B, 0x0F, 0x5A, 0xB3, 0x89, 0x55, 0x31, 0x96,
+ 0x0D, 0xCD, 0xF6, 0x51, 0x03, 0x2D, 0x89, 0x26,
+ 0x74, 0x44, 0xD6, 0xE8, 0xDC, 0xEA, 0x44, 0x55,
+ 0x64, 0x71, 0x9C, 0x9F, 0x5D, 0xBA, 0x39, 0x46,
+ 0xA8, 0x17, 0xA1, 0x9C, 0x52, 0x9D, 0xBC, 0x6B,
+ 0x4A, 0x98, 0xE6, 0xEA, 0x33, 0xEC, 0x58, 0xB4,
+ 0x43, 0xF0, 0x32, 0x45, 0xA4, 0xC1, 0x55, 0xB7,
+ 0x5D, 0xB5, 0x59, 0xB2, 0xE3, 0x96, 0xFF, 0xA5,
+ 0xAF, 0xE1, 0x86, 0x1B, 0x42, 0xE6, 0x3B, 0xA0,
+ 0x90, 0x4A, 0xE8, 0x8C, 0x21, 0x7F, 0x36, 0x1E,
+ 0x5B, 0x65, 0x25, 0xD1, 0xC1, 0x5A, 0xCA, 0x3D,
+ 0x10, 0xED, 0x2D, 0x79, 0xD0, 0x0F, 0x58, 0x44,
+ 0x69, 0x81, 0xF5, 0xD4, 0xC9, 0x0F, 0x90, 0x76,
+ 0x1F, 0x54, 0xD2, 0xD5, 0x97, 0xCE, 0x2C, 0xE3,
+ 0xEF, 0xF4, 0xB7, 0xC6, 0x3A, 0x87, 0x7F, 0x83,
+ 0x2A, 0xAF, 0xCD, 0x90, 0x12, 0xA7, 0x7D, 0x85,
+ 0x1D, 0x62, 0xD3, 0x85, 0x25, 0x05, 0xDB, 0x45,
+ 0x92, 0xA3, 0xF6, 0xA2, 0xA8, 0x41, 0xE4, 0x25,
+ 0x86, 0x87, 0x67, 0x24, 0xEC, 0x89, 0x23, 0x2A,
+ 0x9B, 0x20, 0x4D, 0x93, 0xEE, 0xE2, 0x2E, 0xC1,
+ 0x0B, 0x15, 0x33, 0xCF, 0x00, 0xD1, 0x1A, 0xDA,
+ 0x93, 0xFD, 0x28, 0x21, 0x5B, 0xCF, 0xD1, 0xF3,
+ 0x5A, 0x81, 0xBA, 0x82, 0x5E, 0x2F, 0x61, 0xB4,
+ 0x05, 0x71, 0xB5, 0xF4, 0x39, 0x3C, 0x1F, 0x60,
+ 0x00, 0x7A, 0xC4, 0xF8, 0x35, 0x20, 0x6C, 0x3A,
+ 0xCC, 0x03, 0x8F, 0x7B, 0xA2, 0xB6, 0x65, 0x8A,
+ 0xB6, 0x5F, 0xFD, 0x25, 0xD3, 0x5F, 0x92, 0xF9,
+ 0xAE, 0x17, 0x9B, 0x5E, 0x6E, 0x9A, 0xE4, 0x55,
+ 0x10, 0x25, 0x07, 0xA4, 0xAF, 0x21, 0x69, 0x13,
+ 0xD8, 0xFA, 0x31, 0xED, 0xF7, 0xA7, 0xA7, 0x3B,
+ 0xB8, 0x96, 0x8E, 0x10, 0x86, 0x74, 0xD8, 0xB1,
+ 0x34, 0x9E, 0x9B, 0x6A, 0x26, 0xA8, 0xD4, 0xD0,
+ 0xB5, 0xF6, 0xDE, 0xE7, 0xCA, 0x06, 0xDC, 0xA3,
+ 0x6F, 0xEE, 0x6B, 0x1E, 0xB5, 0x30, 0x99, 0x23,
+ 0xF9, 0x76, 0xF0, 0xA0, 0xCF, 0x3B, 0x94, 0x7B,
+ 0x19, 0x8D, 0xA5, 0x0C, 0x18, 0xA6, 0x1D, 0x07,
+ 0x89, 0xBE, 0x5B, 0x61, 0xE5, 0xF1, 0x42, 0xDB,
+ 0xD4, 0x2E, 0x02, 0x1F, 0xCE, 0xEF, 0x92, 0xB1,
+ 0x1B, 0x56, 0x50, 0xF2, 0x16, 0xE5, 0xE7, 0x4F,
+ 0xFD, 0xBB, 0x3E, 0xD2, 0xFC, 0x3C, 0xC6, 0x0F,
+ 0xF9, 0x12, 0x4E, 0xCB, 0x1E, 0x0C, 0x15, 0x84,
+ 0x2A, 0x14, 0x8A, 0x02, 0xE4, 0x7E, 0x95, 0x5B,
+ 0x86, 0xDB, 0x9B, 0x62, 0x5B, 0x19, 0xD2, 0x17,
+ 0xFA, 0x13, 0xBB, 0x6B, 0x3F, 0x45, 0x9F, 0xBF
+};
+
+
+static uint8_t ms_hmac_key0[] = {
+ 0xFF, 0x1A, 0x7D, 0x3D, 0xF5, 0x82, 0x80, 0xF1,
+ 0xF1, 0x35, 0x5C, 0x3B, 0xDD, 0x9A, 0x65, 0xBA,
+ 0x58, 0x34, 0x85, 0x65, 0x1C, 0x42, 0x50, 0x76,
+ 0x9A, 0xAF, 0x88, 0x1B, 0xB6, 0x8F, 0xF8, 0x60,
+ 0xA2, 0x5A, 0x7F, 0x3F, 0xF4, 0x72, 0x70, 0xF1,
+ 0xF5, 0x35, 0x4C, 0x3B, 0xDD, 0x90, 0x65, 0xB0,
+ 0x47, 0x3A, 0x75, 0x61, 0x5C, 0xA2, 0x10, 0x76,
+ 0x9A, 0xAF, 0x77, 0x5B, 0xB6, 0x7F, 0xF7, 0x60
+};
+
+static const uint8_t ms_hmac_digest0[] = {
+ 0x43, 0x52, 0xED, 0x34, 0xAB, 0x36, 0xB2, 0x51,
+ 0xFB, 0xA3, 0xA6, 0x7C, 0x38, 0xFC, 0x42, 0x8F,
+ 0x57, 0x64, 0xAB, 0x81, 0xA7, 0x89, 0xB7, 0x6C,
+ 0xA0, 0xDC, 0xB9, 0x4D, 0xC4, 0x30, 0xF9, 0xD4,
+ 0x10, 0x82, 0x55, 0xD0, 0xAB, 0x32, 0xFB, 0x56,
+ 0x0D, 0xE4, 0x68, 0x3D, 0x76, 0xD0, 0x7B, 0xE4,
+ 0xA6, 0x2C, 0x34, 0x9E, 0x8C, 0x41, 0xF8, 0x23,
+ 0x28, 0x1B, 0x3A, 0x90, 0x26, 0x34, 0x47, 0x90
+ };
+
+/* End Session 0 */
+/* Begin session 1 */
+
+static uint8_t ms_aes_cbc_key1[] = {
+ 0xf1, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7,
+ 0xf8, 0xf9, 0xfa, 0xfb, 0xfc, 0xfd, 0xfe, 0xff
+};
+
+static uint8_t ms_aes_cbc_iv1[] = {
+ 0xf1, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7,
+ 0xf8, 0xf9, 0xfa, 0xfb, 0xfc, 0xfd, 0xfe, 0xff
+};
+
+static const uint8_t ms_aes_cbc_cipher1[] = {
+ 0x5A, 0x7A, 0x67, 0x5D, 0xB8, 0xE1, 0xDC, 0x71,
+ 0x39, 0xA8, 0x74, 0x93, 0x9C, 0x4C, 0xFE, 0x23,
+ 0x61, 0xCD, 0xA4, 0xB3, 0xD9, 0xCE, 0x99, 0x09,
+ 0x2A, 0x23, 0xF3, 0x29, 0xBF, 0x4C, 0xB4, 0x6A,
+ 0x1B, 0x6B, 0x73, 0x4D, 0x48, 0x0C, 0xCF, 0x6C,
+ 0x5E, 0x34, 0x9E, 0x7F, 0xBC, 0x8F, 0xCC, 0x8F,
+ 0x75, 0x1D, 0x3D, 0x77, 0x10, 0x76, 0xC8, 0xB9,
+ 0x99, 0x6F, 0xD6, 0x56, 0x75, 0xA9, 0xB2, 0x66,
+ 0xC2, 0x24, 0x2B, 0x9C, 0xFE, 0x40, 0x8E, 0x43,
+ 0x20, 0x97, 0x1B, 0xFA, 0xD0, 0xCF, 0x04, 0xAB,
+ 0xBB, 0xF6, 0x5D, 0xF5, 0xA0, 0x19, 0x7C, 0x23,
+ 0x5D, 0x80, 0x8C, 0x49, 0xF6, 0x76, 0x88, 0x29,
+ 0x27, 0x4C, 0x59, 0x2B, 0x43, 0xA6, 0xB2, 0x26,
+ 0x27, 0x78, 0xBE, 0x1B, 0xE1, 0x4F, 0x5A, 0x1F,
+ 0xFC, 0x68, 0x08, 0xE7, 0xC4, 0xD1, 0x34, 0x68,
+ 0xB7, 0x13, 0x14, 0x41, 0x62, 0x6B, 0x1F, 0x77,
+ 0x0C, 0x68, 0x1D, 0x0D, 0xED, 0x89, 0xAA, 0xD8,
+ 0x97, 0x02, 0xBA, 0x5E, 0xD4, 0x84, 0x25, 0x97,
+ 0x03, 0xA5, 0xA6, 0x13, 0x66, 0x02, 0xF4, 0xC3,
+ 0xF3, 0xD3, 0xCC, 0x95, 0xC3, 0x87, 0x46, 0x90,
+ 0x1F, 0x6E, 0x14, 0xA8, 0x00, 0xF2, 0x6F, 0xD5,
+ 0xA1, 0xAD, 0xD5, 0x40, 0xA2, 0x0F, 0x32, 0x7E,
+ 0x99, 0xA3, 0xF5, 0x53, 0xC3, 0x26, 0xA1, 0x45,
+ 0x01, 0x88, 0x57, 0x84, 0x3E, 0x7B, 0x4E, 0x0B,
+ 0x3C, 0xB5, 0x3E, 0x9E, 0xE9, 0x78, 0x77, 0xC5,
+ 0xC0, 0x89, 0xA8, 0xF8, 0xF1, 0xA5, 0x2D, 0x5D,
+ 0xF9, 0xC6, 0xFB, 0xCB, 0x05, 0x23, 0xBD, 0x6E,
+ 0x5E, 0x14, 0xC6, 0x57, 0x73, 0xCF, 0x98, 0xBD,
+ 0x10, 0x8B, 0x18, 0xA6, 0x01, 0x5B, 0x13, 0xAE,
+ 0x8E, 0xDE, 0x1F, 0xB5, 0xB7, 0x40, 0x6C, 0xC1,
+ 0x1E, 0xA1, 0x19, 0x20, 0x9E, 0x95, 0xE0, 0x2F,
+ 0x1C, 0xF5, 0xD9, 0xD0, 0x2B, 0x1E, 0x82, 0x25,
+ 0x62, 0xB4, 0xEB, 0xA1, 0x1F, 0xCE, 0x44, 0xA1,
+ 0xCB, 0x92, 0x01, 0x6B, 0xE4, 0x26, 0x23, 0xE3,
+ 0xC5, 0x67, 0x35, 0x55, 0xDA, 0xE5, 0x27, 0xEE,
+ 0x8D, 0x12, 0x84, 0xB7, 0xBA, 0xA7, 0x1C, 0xD6,
+ 0x32, 0x3F, 0x67, 0xED, 0xFB, 0x5B, 0x8B, 0x52,
+ 0x46, 0x8C, 0xF9, 0x69, 0xCD, 0xAE, 0x79, 0xAA,
+ 0x37, 0x78, 0x49, 0xEB, 0xC6, 0x8E, 0x76, 0x63,
+ 0x84, 0xFF, 0x9D, 0x22, 0x99, 0x51, 0xB7, 0x5E,
+ 0x83, 0x4C, 0x8B, 0xDF, 0x5A, 0x07, 0xCC, 0xBA,
+ 0x42, 0xA5, 0x98, 0xB6, 0x47, 0x0E, 0x66, 0xEB,
+ 0x23, 0x0E, 0xBA, 0x44, 0xA8, 0xAA, 0x20, 0x71,
+ 0x79, 0x9C, 0x77, 0x5F, 0xF5, 0xFE, 0xEC, 0xEF,
+ 0xC6, 0x64, 0x3D, 0x84, 0xD0, 0x2B, 0xA7, 0x0A,
+ 0xC3, 0x72, 0x5B, 0x9C, 0xFA, 0xA8, 0x87, 0x95,
+ 0x94, 0x11, 0x38, 0xA7, 0x1E, 0x58, 0xE3, 0x73,
+ 0xC6, 0xC9, 0xD1, 0x7B, 0x92, 0xDB, 0x0F, 0x49,
+ 0x74, 0xC2, 0xA2, 0x0E, 0x35, 0x57, 0xAC, 0xDB,
+ 0x9A, 0x1C, 0xCF, 0x5A, 0x32, 0x3E, 0x26, 0x9B,
+ 0xEC, 0xB3, 0xEF, 0x9C, 0xFE, 0xBE, 0x52, 0xAC,
+ 0xB1, 0x29, 0xDD, 0xFD, 0x07, 0xE2, 0xEE, 0xED,
+ 0xE4, 0x46, 0x37, 0xFE, 0xD1, 0xDC, 0xCD, 0x02,
+ 0xF9, 0x31, 0xB0, 0xFB, 0x36, 0xB7, 0x34, 0xA4,
+ 0x76, 0xE8, 0x57, 0xBF, 0x99, 0x92, 0xC7, 0xAF,
+ 0x98, 0x10, 0xE2, 0x70, 0xCA, 0xC9, 0x2B, 0x82,
+ 0x06, 0x96, 0x88, 0x0D, 0xB3, 0xAC, 0x9E, 0x6D,
+ 0x43, 0xBC, 0x5B, 0x31, 0xCF, 0x65, 0x8D, 0xA6,
+ 0xC7, 0xFE, 0x73, 0xE1, 0x54, 0xF7, 0x10, 0xF9,
+ 0x86, 0xF7, 0xDF, 0xA1, 0xA1, 0xD8, 0xAE, 0x35,
+ 0xB3, 0x90, 0xDC, 0x6F, 0x43, 0x7A, 0x8B, 0xE0,
+ 0xFE, 0x8F, 0x33, 0x4D, 0x29, 0x6C, 0x45, 0x53,
+ 0x73, 0xDD, 0x21, 0x0B, 0x85, 0x30, 0xB5, 0xA5,
+ 0xF3, 0x5D, 0xEC, 0x79, 0x61, 0x9D, 0x9E, 0xB3
+
+};
+
+static uint8_t ms_hmac_key1[] = {
+ 0xFE, 0x1A, 0x7D, 0x3D, 0xF5, 0x82, 0x80, 0xF1,
+ 0xF1, 0x35, 0x5C, 0x3B, 0xDD, 0x9A, 0x65, 0xBA,
+ 0x58, 0x34, 0x85, 0x65, 0x1C, 0x42, 0x50, 0x76,
+ 0x9A, 0xAF, 0x88, 0x1B, 0xB6, 0x8F, 0xF8, 0x60,
+ 0xA2, 0x5A, 0x7F, 0x3F, 0xF4, 0x72, 0x70, 0xF1,
+ 0xF5, 0x35, 0x4C, 0x3B, 0xDD, 0x90, 0x65, 0xB0,
+ 0x47, 0x3A, 0x75, 0x61, 0x5C, 0xA2, 0x10, 0x76,
+ 0x9A, 0xAF, 0x77, 0x5B, 0xB6, 0x7F, 0xF7, 0x60
+};
+
+static const uint8_t ms_hmac_digest1[] = {
+ 0xCE, 0x6E, 0x5F, 0x77, 0x96, 0x9A, 0xB1, 0x69,
+ 0x2D, 0x5E, 0xF3, 0x2F, 0x32, 0x10, 0xCB, 0x50,
+ 0x0E, 0x09, 0x56, 0x25, 0x07, 0x34, 0xC9, 0x20,
+ 0xEC, 0x13, 0x43, 0x23, 0x5C, 0x08, 0x8B, 0xCD,
+ 0xDC, 0x86, 0x8C, 0xEE, 0x0A, 0x95, 0x2E, 0xB9,
+ 0x8C, 0x7B, 0x02, 0x7A, 0xD4, 0xE1, 0x49, 0xB4,
+ 0x45, 0xB5, 0x52, 0x37, 0xC6, 0xFF, 0xFE, 0xAA,
+ 0x0A, 0x87, 0xB8, 0x51, 0xF9, 0x2A, 0x01, 0x8F
+};
+/* End Session 1 */
+/* Begin Session 2 */
+static uint8_t ms_aes_cbc_key2[] = {
+ 0xff, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7,
+ 0xf8, 0xf9, 0xfa, 0xfb, 0xfc, 0xfd, 0xfe, 0xff
+};
+
+static uint8_t ms_aes_cbc_iv2[] = {
+ 0xff, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7,
+ 0xf8, 0xf9, 0xfa, 0xfb, 0xfc, 0xfd, 0xfe, 0xff
+};
+
+static const uint8_t ms_aes_cbc_cipher2[] = {
+ 0xBB, 0x3C, 0x68, 0x25, 0xFD, 0xB6, 0xA2, 0x91,
+ 0x20, 0x56, 0xF6, 0x30, 0x35, 0xFC, 0x9E, 0x97,
+ 0xF2, 0x90, 0xFC, 0x7E, 0x3E, 0x0A, 0x75, 0xC8,
+ 0x4C, 0xF2, 0x2D, 0xAC, 0xD3, 0x93, 0xF0, 0xC5,
+ 0x14, 0x88, 0x8A, 0x23, 0xC2, 0x59, 0x9A, 0x98,
+ 0x4B, 0xD5, 0x2C, 0xDA, 0x43, 0xA9, 0x34, 0x69,
+ 0x7C, 0x6D, 0xDB, 0xDC, 0xCB, 0xC0, 0xA0, 0x09,
+ 0xA7, 0x86, 0x16, 0x4B, 0xBF, 0xA8, 0xB6, 0xCF,
+ 0x7F, 0x74, 0x1F, 0x22, 0xF0, 0xF6, 0xBB, 0x44,
+ 0x8B, 0x4C, 0x9E, 0x23, 0xF8, 0x9F, 0xFC, 0x5B,
+ 0x9E, 0x9C, 0x2A, 0x79, 0x30, 0x8F, 0xBF, 0xA9,
+ 0x68, 0xA1, 0x20, 0x71, 0x7C, 0x77, 0x22, 0x34,
+ 0x07, 0xCD, 0xC6, 0xF6, 0x50, 0x0A, 0x08, 0x99,
+ 0x17, 0x98, 0xE3, 0x93, 0x8A, 0xB0, 0xEE, 0xDF,
+ 0xC2, 0xBA, 0x3B, 0x44, 0x73, 0xDF, 0xDD, 0xDC,
+ 0x14, 0x4D, 0x3B, 0xBB, 0x5E, 0x58, 0xC1, 0x26,
+ 0xA7, 0xAE, 0x47, 0xF3, 0x24, 0x6D, 0x4F, 0xD3,
+ 0x6E, 0x3E, 0x33, 0xE6, 0x7F, 0xCA, 0x50, 0xAF,
+ 0x5D, 0x3D, 0xA0, 0xDD, 0xC9, 0xF3, 0x30, 0xD3,
+ 0x6E, 0x8B, 0x2E, 0x12, 0x24, 0x34, 0xF0, 0xD3,
+ 0xC7, 0x8D, 0x23, 0x29, 0xAA, 0x05, 0xE1, 0xFA,
+ 0x2E, 0xF6, 0x8D, 0x37, 0x86, 0xC0, 0x6D, 0x13,
+ 0x2D, 0x98, 0xF3, 0x52, 0x39, 0x22, 0xCE, 0x38,
+ 0xC2, 0x1A, 0x72, 0xED, 0xFB, 0xCC, 0xE4, 0x71,
+ 0x5A, 0x0C, 0x0D, 0x09, 0xF8, 0xE8, 0x1B, 0xBC,
+ 0x53, 0xC8, 0xD8, 0x8F, 0xE5, 0x98, 0x5A, 0xB1,
+ 0x06, 0xA6, 0x5B, 0xE6, 0xA2, 0x88, 0x21, 0x9E,
+ 0x36, 0xC0, 0x34, 0xF9, 0xFB, 0x3B, 0x0A, 0x22,
+ 0x00, 0x00, 0x39, 0x48, 0x8D, 0x23, 0x74, 0x62,
+ 0x72, 0x91, 0xE6, 0x36, 0xAA, 0x77, 0x9C, 0x72,
+ 0x9D, 0xA8, 0xC3, 0xA9, 0xD5, 0x44, 0x72, 0xA6,
+ 0xB9, 0x28, 0x8F, 0x64, 0x4C, 0x8A, 0x64, 0xE6,
+ 0x4E, 0xFA, 0xEF, 0x87, 0xDE, 0x7B, 0x22, 0x44,
+ 0xB0, 0xDF, 0x2E, 0x5F, 0x0B, 0xA5, 0xF2, 0x24,
+ 0x07, 0x5C, 0x2D, 0x39, 0xB7, 0x3D, 0x8A, 0xE5,
+ 0x0E, 0x9D, 0x4E, 0x50, 0xED, 0x03, 0x99, 0x8E,
+ 0xF0, 0x06, 0x55, 0x4E, 0xA2, 0x24, 0xE7, 0x17,
+ 0x46, 0xDF, 0x6C, 0xCD, 0xC6, 0x44, 0xE8, 0xF9,
+ 0xB9, 0x1B, 0x36, 0xF6, 0x7F, 0x10, 0xA4, 0x7D,
+ 0x90, 0xBD, 0xE4, 0xAA, 0xD6, 0x9E, 0x18, 0x9D,
+ 0x22, 0x35, 0xD6, 0x55, 0x54, 0xAA, 0xF7, 0x22,
+ 0xA3, 0x3E, 0xEF, 0xC8, 0xA2, 0x34, 0x8D, 0xA9,
+ 0x37, 0x63, 0xA6, 0xC3, 0x57, 0xCB, 0x0C, 0x49,
+ 0x7D, 0x02, 0xBE, 0xAA, 0x13, 0x75, 0xB7, 0x4E,
+ 0x52, 0x62, 0xA5, 0xC2, 0x33, 0xC7, 0x6C, 0x1B,
+ 0xF6, 0x34, 0xF6, 0x09, 0xA5, 0x0C, 0xC7, 0xA2,
+ 0x61, 0x48, 0x62, 0x7D, 0x17, 0x15, 0xE3, 0x95,
+ 0xC8, 0x63, 0xD2, 0xA4, 0x43, 0xA9, 0x49, 0x07,
+ 0xB2, 0x3B, 0x2B, 0x62, 0x7D, 0xCB, 0x51, 0xB3,
+ 0x25, 0x33, 0x47, 0x0E, 0x14, 0x67, 0xDC, 0x6A,
+ 0x9B, 0x51, 0xAC, 0x9D, 0x8F, 0xA2, 0x2B, 0x57,
+ 0x8C, 0x5C, 0x5F, 0x76, 0x23, 0x92, 0x0F, 0x84,
+ 0x46, 0x0E, 0x40, 0x85, 0x38, 0x60, 0xFA, 0x61,
+ 0x20, 0xC5, 0xE3, 0xF1, 0x70, 0xAC, 0x1B, 0xBF,
+ 0xC4, 0x2B, 0xC5, 0x67, 0xD1, 0x43, 0xC5, 0x17,
+ 0x74, 0x71, 0x69, 0x6F, 0x82, 0x89, 0x19, 0x8A,
+ 0x70, 0x43, 0x92, 0x01, 0xC4, 0x63, 0x7E, 0xB1,
+ 0x59, 0x4E, 0xCD, 0xEA, 0x93, 0xA4, 0x52, 0x53,
+ 0x9B, 0x61, 0x5B, 0xD2, 0x3E, 0x19, 0x39, 0xB7,
+ 0x32, 0xEA, 0x8E, 0xF8, 0x1D, 0x76, 0x5C, 0xB2,
+ 0x73, 0x2D, 0x91, 0xC0, 0x18, 0xED, 0x25, 0x2A,
+ 0x53, 0x64, 0xF0, 0x92, 0x31, 0x55, 0x21, 0xA8,
+ 0x24, 0xA9, 0xD1, 0x02, 0xF6, 0x6C, 0x2B, 0x70,
+ 0xA9, 0x59, 0xC1, 0xD6, 0xC3, 0x57, 0x5B, 0x92
+};
+
+static uint8_t ms_hmac_key2[] = {
+ 0xFC, 0x1A, 0x7D, 0x3D, 0xF5, 0x82, 0x80, 0xF1,
+ 0xF1, 0x35, 0x5C, 0x3B, 0xDD, 0x9A, 0x65, 0xBA,
+ 0x58, 0x34, 0x85, 0x65, 0x1C, 0x42, 0x50, 0x76,
+ 0x9A, 0xAF, 0x88, 0x1B, 0xB6, 0x8F, 0xF8, 0x60,
+ 0xA2, 0x5A, 0x7F, 0x3F, 0xF4, 0x72, 0x70, 0xF1,
+ 0xF5, 0x35, 0x4C, 0x3B, 0xDD, 0x90, 0x65, 0xB0,
+ 0x47, 0x3A, 0x75, 0x61, 0x5C, 0xA2, 0x10, 0x76,
+ 0x9A, 0xAF, 0x77, 0x5B, 0xB6, 0x7F, 0xF7, 0x60
+};
+
+static const uint8_t ms_hmac_digest2[] = {
+ 0xA5, 0x0F, 0x9C, 0xFB, 0x08, 0x62, 0x59, 0xFF,
+ 0x80, 0x2F, 0xEB, 0x4B, 0xE1, 0x46, 0x21, 0xD6,
+ 0x02, 0x98, 0xF2, 0x8E, 0xF4, 0xEC, 0xD4, 0x77,
+ 0x86, 0x4C, 0x31, 0x28, 0xC8, 0x25, 0x80, 0x27,
+ 0x3A, 0x72, 0x5D, 0x6A, 0x56, 0x8A, 0xD3, 0x82,
+ 0xB0, 0xEC, 0x31, 0x6D, 0x8B, 0x6B, 0xB4, 0x24,
+ 0xE7, 0x62, 0xC1, 0x52, 0xBC, 0x14, 0x1B, 0x8E,
+ 0xEC, 0x9A, 0xF1, 0x47, 0x80, 0xD2, 0xB0, 0x59
+};
+
+/* End Session 2 */
+
+
static int
test_AES_CBC_HMAC_SHA1_encrypt_digest(void)
{
@@ -1145,6 +1478,38 @@ test_AES_chain_mb_all(void)
}
static int
+test_AES_chain_libcrypto_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool, ts_params->valid_devs[0],
+ RTE_CRYPTODEV_LIBCRYPTO_PMD,
+ BLKCIPHER_AES_CHAIN_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_AES_cipheronly_libcrypto_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool, ts_params->valid_devs[0],
+ RTE_CRYPTODEV_LIBCRYPTO_PMD,
+ BLKCIPHER_AES_CIPHERONLY_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
+static int
test_AES_chain_qat_all(void)
{
struct crypto_testsuite_params *ts_params = &testsuite_params;
@@ -1160,6 +1525,22 @@ test_AES_chain_qat_all(void)
return TEST_SUCCESS;
}
+static int
+test_authonly_libcrypto_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool, ts_params->valid_devs[0],
+ RTE_CRYPTODEV_LIBCRYPTO_PMD,
+ BLKCIPHER_AUTHONLY_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
/* ***** SNOW 3G Tests ***** */
static int
create_wireless_algo_hash_session(uint8_t dev_id,
@@ -3411,6 +3792,70 @@ test_zuc_hash_generate_test_case_5(void)
return test_zuc_authentication(&zuc_hash_test_case_5);
}
+static int
+test_3DES_chain_qat_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool, ts_params->valid_devs[0],
+ RTE_CRYPTODEV_QAT_SYM_PMD,
+ BLKCIPHER_3DES_CHAIN_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_3DES_cipheronly_qat_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool, ts_params->valid_devs[0],
+ RTE_CRYPTODEV_QAT_SYM_PMD,
+ BLKCIPHER_3DES_CIPHERONLY_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_3DES_chain_libcrypto_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool, ts_params->valid_devs[0],
+ RTE_CRYPTODEV_LIBCRYPTO_PMD,
+ BLKCIPHER_3DES_CHAIN_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_3DES_cipheronly_libcrypto_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool, ts_params->valid_devs[0],
+ RTE_CRYPTODEV_LIBCRYPTO_PMD,
+ BLKCIPHER_3DES_CIPHERONLY_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
/* ***** AES-GCM Tests ***** */
static int
@@ -4104,6 +4549,119 @@ test_multi_session(void)
return TEST_SUCCESS;
}
+struct multi_session_params {
+ struct crypto_unittest_params ut_params;
+ uint8_t *cipher_key;
+ uint8_t *hmac_key;
+ const uint8_t *cipher;
+ const uint8_t *digest;
+ uint8_t *iv;
+};
+
+#define MB_SESSION_NUMBER 3
+
+static int
+test_multi_session_random_usage(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ struct rte_cryptodev_info dev_info;
+ struct rte_cryptodev_sym_session **sessions;
+ uint32_t i, j;
+ struct multi_session_params ut_paramz[] = {
+
+ {
+ .cipher_key = ms_aes_cbc_key0,
+ .hmac_key = ms_hmac_key0,
+ .cipher = ms_aes_cbc_cipher0,
+ .digest = ms_hmac_digest0,
+ .iv = ms_aes_cbc_iv0
+ },
+ {
+ .cipher_key = ms_aes_cbc_key1,
+ .hmac_key = ms_hmac_key1,
+ .cipher = ms_aes_cbc_cipher1,
+ .digest = ms_hmac_digest1,
+ .iv = ms_aes_cbc_iv1
+ },
+ {
+ .cipher_key = ms_aes_cbc_key2,
+ .hmac_key = ms_hmac_key2,
+ .cipher = ms_aes_cbc_cipher2,
+ .digest = ms_hmac_digest2,
+ .iv = ms_aes_cbc_iv2
+ },
+
+ };
+
+ rte_cryptodev_info_get(ts_params->valid_devs[0], &dev_info);
+
+ sessions = rte_malloc(NULL,
+ (sizeof(struct rte_cryptodev_sym_session *)
+ * dev_info.sym.max_nb_sessions) + 1, 0);
+
+ for (i = 0; i < MB_SESSION_NUMBER; i++) {
+ rte_memcpy(&ut_paramz[i].ut_params, &testsuite_params,
+ sizeof(struct crypto_unittest_params));
+
+ test_AES_CBC_HMAC_SHA512_decrypt_create_session_params(
+ &ut_paramz[i].ut_params,
+ ut_paramz[i].cipher_key, ut_paramz[i].hmac_key);
+
+ /* Create multiple crypto sessions*/
+ sessions[i] = rte_cryptodev_sym_session_create(
+ ts_params->valid_devs[0],
+ &ut_paramz[i].ut_params.auth_xform);
+
+ TEST_ASSERT_NOT_NULL(sessions[i],
+ "Session creation failed at session number %u",
+ i);
+
+ }
+
+ srand(time(NULL));
+ for (i = 0; i < 40000; i++) {
+
+ j = rand() % MB_SESSION_NUMBER;
+
+ TEST_ASSERT_SUCCESS(
+ test_AES_CBC_HMAC_SHA512_decrypt_perform(
+ sessions[j],
+ &ut_paramz[j].ut_params,
+ ts_params, ut_paramz[j].cipher,
+ ut_paramz[j].digest,
+ ut_paramz[j].iv),
+ "Failed to perform decrypt on request number %u.", i);
+
+ if (ut_paramz[j].ut_params.op)
+ rte_crypto_op_free(ut_paramz[j].ut_params.op);
+
+ /*
+ * free mbuf - both obuf and ibuf are usually the same,
+ * so check if they point at the same address is necessary,
+ * to avoid freeing the mbuf twice.
+ */
+ if (ut_paramz[j].ut_params.obuf) {
+ rte_pktmbuf_free(ut_paramz[j].ut_params.obuf);
+ if (ut_paramz[j].ut_params.ibuf
+ == ut_paramz[j].ut_params.obuf)
+ ut_paramz[j].ut_params.ibuf = 0;
+ ut_paramz[j].ut_params.obuf = 0;
+ }
+ if (ut_paramz[j].ut_params.ibuf) {
+ rte_pktmbuf_free(ut_paramz[j].ut_params.ibuf);
+ ut_paramz[j].ut_params.ibuf = 0;
+ }
+ }
+
+ for (i = 0; i < MB_SESSION_NUMBER; i++)
+ rte_cryptodev_sym_session_free(ts_params->valid_devs[0],
+ sessions[i]);
+
+ rte_free(sessions);
+
+ return TEST_SUCCESS;
+}
+
static int
test_null_cipher_only_operation(void)
{
@@ -4457,6 +5015,15 @@ test_null_burst_operation(void)
return TEST_SUCCESS;
}
+static void
+generate_gmac_large_plaintext(uint8_t *data)
+{
+ uint16_t i;
+
+ for (i = 32; i < GMAC_LARGE_PLAINTEXT_LENGTH; i += 32)
+ memcpy(&data[i], &data[0], 32);
+}
+
static int
create_gmac_operation(enum rte_crypto_auth_operation op,
const struct gmac_test_data *tdata)
@@ -4471,6 +5038,14 @@ create_gmac_operation(enum rte_crypto_auth_operation op,
iv_pad_len = RTE_ALIGN_CEIL(tdata->iv.len, 16);
aad_pad_len = RTE_ALIGN_CEIL(tdata->aad.len, 16);
+ /*
+ * Runtime generate the large plain text instead of use hard code
+ * plain text vector. It is done to avoid create huge source file
+ * with the test vector.
+ */
+ if (tdata->aad.len == GMAC_LARGE_PLAINTEXT_LENGTH)
+ generate_gmac_large_plaintext(tdata->aad.data);
+
/* Generate Crypto op data structure */
ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
RTE_CRYPTO_OP_TYPE_SYMMETRIC);
@@ -4648,6 +5223,12 @@ test_AES_GMAC_authentication_test_case_3(void)
}
static int
+test_AES_GMAC_authentication_test_case_4(void)
+{
+ return test_AES_GMAC_authentication(&gmac_test_case_4);
+}
+
+static int
test_AES_GMAC_authentication_verify(const struct gmac_test_data *tdata)
{
struct crypto_testsuite_params *ts_params = &testsuite_params;
@@ -4707,64 +5288,782 @@ test_AES_GMAC_authentication_verify_test_case_3(void)
return test_AES_GMAC_authentication_verify(&gmac_test_case_3);
}
-static struct unit_test_suite cryptodev_qat_testsuite = {
- .suite_name = "Crypto QAT Unit Test Suite",
- .setup = testsuite_setup,
- .teardown = testsuite_teardown,
- .unit_test_cases = {
- TEST_CASE_ST(ut_setup, ut_teardown,
- test_device_configure_invalid_dev_id),
- TEST_CASE_ST(ut_setup, ut_teardown,
- test_device_configure_invalid_queue_pair_ids),
- TEST_CASE_ST(ut_setup, ut_teardown,
- test_queue_pair_descriptor_setup),
- TEST_CASE_ST(ut_setup, ut_teardown,
- test_multi_session),
+static int
+test_AES_GMAC_authentication_verify_test_case_4(void)
+{
+ return test_AES_GMAC_authentication_verify(&gmac_test_case_4);
+}
- TEST_CASE_ST(ut_setup, ut_teardown, test_AES_chain_qat_all),
- TEST_CASE_ST(ut_setup, ut_teardown, test_stats),
+struct test_crypto_vector {
+ enum rte_crypto_cipher_algorithm crypto_algo;
- /** AES GCM Authenticated Encryption */
- TEST_CASE_ST(ut_setup, ut_teardown,
- test_mb_AES_GCM_authenticated_encryption_test_case_1),
- TEST_CASE_ST(ut_setup, ut_teardown,
- test_mb_AES_GCM_authenticated_encryption_test_case_2),
- TEST_CASE_ST(ut_setup, ut_teardown,
- test_mb_AES_GCM_authenticated_encryption_test_case_3),
- TEST_CASE_ST(ut_setup, ut_teardown,
- test_mb_AES_GCM_authenticated_encryption_test_case_4),
- TEST_CASE_ST(ut_setup, ut_teardown,
- test_mb_AES_GCM_authenticated_encryption_test_case_5),
- TEST_CASE_ST(ut_setup, ut_teardown,
- test_mb_AES_GCM_authenticated_encryption_test_case_6),
- TEST_CASE_ST(ut_setup, ut_teardown,
- test_mb_AES_GCM_authenticated_encryption_test_case_7),
+ struct {
+ uint8_t data[64];
+ unsigned int len;
+ } cipher_key;
- /** AES GCM Authenticated Decryption */
- TEST_CASE_ST(ut_setup, ut_teardown,
- test_mb_AES_GCM_authenticated_decryption_test_case_1),
- TEST_CASE_ST(ut_setup, ut_teardown,
- test_mb_AES_GCM_authenticated_decryption_test_case_2),
- TEST_CASE_ST(ut_setup, ut_teardown,
- test_mb_AES_GCM_authenticated_decryption_test_case_3),
- TEST_CASE_ST(ut_setup, ut_teardown,
- test_mb_AES_GCM_authenticated_decryption_test_case_4),
- TEST_CASE_ST(ut_setup, ut_teardown,
- test_mb_AES_GCM_authenticated_decryption_test_case_5),
- TEST_CASE_ST(ut_setup, ut_teardown,
- test_mb_AES_GCM_authenticated_decryption_test_case_6),
- TEST_CASE_ST(ut_setup, ut_teardown,
- test_mb_AES_GCM_authenticated_decryption_test_case_7),
+ struct {
+ uint8_t data[64];
+ unsigned int len;
+ } iv;
- /** AES GMAC Authentication */
- TEST_CASE_ST(ut_setup, ut_teardown,
- test_AES_GMAC_authentication_test_case_1),
- TEST_CASE_ST(ut_setup, ut_teardown,
- test_AES_GMAC_authentication_verify_test_case_1),
- TEST_CASE_ST(ut_setup, ut_teardown,
- test_AES_GMAC_authentication_test_case_2),
- TEST_CASE_ST(ut_setup, ut_teardown,
- test_AES_GMAC_authentication_verify_test_case_2),
+ struct {
+ const uint8_t *data;
+ unsigned int len;
+ } plaintext;
+
+ struct {
+ const uint8_t *data;
+ unsigned int len;
+ } ciphertext;
+
+ enum rte_crypto_auth_algorithm auth_algo;
+
+ struct {
+ uint8_t data[128];
+ unsigned int len;
+ } auth_key;
+
+ struct {
+ const uint8_t *data;
+ unsigned int len;
+ } aad;
+
+ struct {
+ uint8_t data[128];
+ unsigned int len;
+ } digest;
+};
+
+static const struct test_crypto_vector
+hmac_sha1_test_crypto_vector = {
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .plaintext = {
+ .data = plaintext_hash,
+ .len = 512
+ },
+ .auth_key = {
+ .data = {
+ 0xF8, 0x2A, 0xC7, 0x54, 0xDB, 0x96, 0x18, 0xAA,
+ 0xC3, 0xA1, 0x53, 0xF6, 0x1F, 0x17, 0x60, 0xBD,
+ 0xDE, 0xF4, 0xDE, 0xAD
+ },
+ .len = 20
+ },
+ .digest = {
+ .data = {
+ 0xC4, 0xB7, 0x0E, 0x6B, 0xDE, 0xD1, 0xE7, 0x77,
+ 0x7E, 0x2E, 0x8F, 0xFC, 0x48, 0x39, 0x46, 0x17,
+ 0x3F, 0x91, 0x64, 0x59
+ },
+ .len = 20
+ }
+};
+
+static const struct test_crypto_vector
+aes128_gmac_test_vector = {
+ .auth_algo = RTE_CRYPTO_AUTH_AES_GMAC,
+ .crypto_algo = RTE_CRYPTO_CIPHER_AES_GCM,
+ .aad = {
+ .data = plaintext_hash,
+ .len = 512
+ },
+ .iv = {
+ .data = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0A, 0x0B
+ },
+ .len = 12
+ },
+ .cipher_key = {
+ .data = {
+ 0x42, 0x1A, 0x7D, 0x3D, 0xF5, 0x82, 0x80, 0xF1,
+ 0xF1, 0x35, 0x5C, 0x3B, 0xDD, 0x9A, 0x65, 0xBA
+ },
+ .len = 16
+ },
+ .digest = {
+ .data = {
+ 0xCA, 0x00, 0x99, 0x8B, 0x30, 0x7E, 0x74, 0x56,
+ 0x32, 0xA7, 0x87, 0xB5, 0xE9, 0xB2, 0x34, 0x5A
+ },
+ .len = 16
+ }
+};
+
+static const struct test_crypto_vector
+aes128cbc_hmac_sha1_test_vector = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .cipher_key = {
+ .data = {
+ 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
+ 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A
+ },
+ .len = 16
+ },
+ .iv = {
+ .data = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
+ },
+ .len = 16
+ },
+ .plaintext = {
+ .data = plaintext_hash,
+ .len = 512
+ },
+ .ciphertext = {
+ .data = ciphertext512_aes128cbc,
+ .len = 512
+ },
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .auth_key = {
+ .data = {
+ 0xF8, 0x2A, 0xC7, 0x54, 0xDB, 0x96, 0x18, 0xAA,
+ 0xC3, 0xA1, 0x53, 0xF6, 0x1F, 0x17, 0x60, 0xBD,
+ 0xDE, 0xF4, 0xDE, 0xAD
+ },
+ .len = 20
+ },
+ .digest = {
+ .data = {
+ 0x9A, 0x4F, 0x88, 0x1B, 0xB6, 0x8F, 0xD8, 0x60,
+ 0x42, 0x1A, 0x7D, 0x3D, 0xF5, 0x82, 0x80, 0xF1,
+ 0x18, 0x8C, 0x1D, 0x32
+ },
+ .len = 20
+ }
+};
+
+static void
+data_corruption(uint8_t *data)
+{
+ data[0] += 1;
+}
+
+static void
+tag_corruption(uint8_t *data, unsigned int tag_offset)
+{
+ data[tag_offset] += 1;
+}
+
+static int
+create_auth_session(struct crypto_unittest_params *ut_params,
+ uint8_t dev_id,
+ const struct test_crypto_vector *reference,
+ enum rte_crypto_auth_operation auth_op)
+{
+ uint8_t auth_key[reference->auth_key.len + 1];
+
+ memcpy(auth_key, reference->auth_key.data, reference->auth_key.len);
+
+ /* Setup Authentication Parameters */
+ ut_params->auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+ ut_params->auth_xform.auth.op = auth_op;
+ ut_params->auth_xform.next = NULL;
+ ut_params->auth_xform.auth.algo = reference->auth_algo;
+ ut_params->auth_xform.auth.key.length = reference->auth_key.len;
+ ut_params->auth_xform.auth.key.data = auth_key;
+ ut_params->auth_xform.auth.digest_length = reference->digest.len;
+ ut_params->auth_xform.auth.add_auth_data_length = reference->aad.len;
+
+ /* Create Crypto session*/
+ ut_params->sess = rte_cryptodev_sym_session_create(dev_id,
+ &ut_params->auth_xform);
+
+ TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
+
+ return 0;
+}
+
+static int
+create_auth_cipher_session(struct crypto_unittest_params *ut_params,
+ uint8_t dev_id,
+ const struct test_crypto_vector *reference,
+ enum rte_crypto_auth_operation auth_op,
+ enum rte_crypto_cipher_operation cipher_op)
+{
+ uint8_t cipher_key[reference->cipher_key.len + 1];
+ uint8_t auth_key[reference->auth_key.len + 1];
+
+ memcpy(cipher_key, reference->cipher_key.data,
+ reference->cipher_key.len);
+ memcpy(auth_key, reference->auth_key.data, reference->auth_key.len);
+
+ /* Setup Authentication Parameters */
+ ut_params->auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+ ut_params->auth_xform.auth.op = auth_op;
+ ut_params->auth_xform.next = &ut_params->cipher_xform;
+ ut_params->auth_xform.auth.algo = reference->auth_algo;
+ ut_params->auth_xform.auth.key.length = reference->auth_key.len;
+ ut_params->auth_xform.auth.key.data = auth_key;
+ ut_params->auth_xform.auth.digest_length = reference->digest.len;
+ ut_params->auth_xform.auth.add_auth_data_length = reference->aad.len;
+
+ /* Setup Cipher Parameters */
+ ut_params->cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+ ut_params->cipher_xform.next = NULL;
+ ut_params->cipher_xform.cipher.algo = reference->crypto_algo;
+ ut_params->cipher_xform.cipher.op = cipher_op;
+ ut_params->cipher_xform.cipher.key.data = cipher_key;
+ ut_params->cipher_xform.cipher.key.length = reference->cipher_key.len;
+
+ /* Create Crypto session*/
+ ut_params->sess = rte_cryptodev_sym_session_create(dev_id,
+ &ut_params->auth_xform);
+
+ TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
+
+ return 0;
+}
+
+static int
+create_auth_operation(struct crypto_testsuite_params *ts_params,
+ struct crypto_unittest_params *ut_params,
+ const struct test_crypto_vector *reference,
+ unsigned int auth_generate)
+{
+ /* Generate Crypto op data structure */
+ ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
+ RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+ TEST_ASSERT_NOT_NULL(ut_params->op,
+ "Failed to allocate pktmbuf offload");
+
+ /* Set crypto operation data parameters */
+ rte_crypto_op_attach_sym_session(ut_params->op, ut_params->sess);
+
+ struct rte_crypto_sym_op *sym_op = ut_params->op->sym;
+
+ /* set crypto operation source mbuf */
+ sym_op->m_src = ut_params->ibuf;
+
+ /* digest */
+ sym_op->auth.digest.data = (uint8_t *)rte_pktmbuf_append(
+ ut_params->ibuf, reference->digest.len);
+
+ TEST_ASSERT_NOT_NULL(sym_op->auth.digest.data,
+ "no room to append auth tag");
+
+ sym_op->auth.digest.phys_addr = rte_pktmbuf_mtophys_offset(
+ ut_params->ibuf, reference->plaintext.len);
+ sym_op->auth.digest.length = reference->digest.len;
+
+ if (auth_generate)
+ memset(sym_op->auth.digest.data, 0, reference->digest.len);
+ else
+ memcpy(sym_op->auth.digest.data,
+ reference->digest.data,
+ reference->digest.len);
+
+ TEST_HEXDUMP(stdout, "digest:",
+ sym_op->auth.digest.data,
+ sym_op->auth.digest.length);
+
+ sym_op->auth.data.length = reference->plaintext.len;
+ sym_op->auth.data.offset = 0;
+
+ return 0;
+}
+
+static int
+create_auth_GMAC_operation(struct crypto_testsuite_params *ts_params,
+ struct crypto_unittest_params *ut_params,
+ const struct test_crypto_vector *reference,
+ unsigned int auth_generate)
+{
+ /* Generate Crypto op data structure */
+ ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
+ RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+ TEST_ASSERT_NOT_NULL(ut_params->op,
+ "Failed to allocate pktmbuf offload");
+
+ /* Set crypto operation data parameters */
+ rte_crypto_op_attach_sym_session(ut_params->op, ut_params->sess);
+
+ struct rte_crypto_sym_op *sym_op = ut_params->op->sym;
+
+ /* set crypto operation source mbuf */
+ sym_op->m_src = ut_params->ibuf;
+
+ /* aad */
+ sym_op->auth.aad.data = (uint8_t *)rte_pktmbuf_append(ut_params->ibuf,
+ reference->aad.len);
+ TEST_ASSERT_NOT_NULL(sym_op->auth.aad.data, "no room to append AAD");
+ memcpy(sym_op->auth.aad.data, reference->aad.data, reference->aad.len);
+
+ TEST_HEXDUMP(stdout, "AAD:", sym_op->auth.aad.data, reference->aad.len);
+
+ sym_op->auth.aad.phys_addr = rte_pktmbuf_mtophys(ut_params->ibuf);
+ sym_op->auth.aad.length = reference->aad.len;
+
+ /* digest */
+ sym_op->auth.digest.data = (uint8_t *)rte_pktmbuf_append(
+ ut_params->ibuf, reference->digest.len);
+
+ TEST_ASSERT_NOT_NULL(sym_op->auth.digest.data,
+ "no room to append auth tag");
+
+ sym_op->auth.digest.phys_addr = rte_pktmbuf_mtophys_offset(
+ ut_params->ibuf, reference->ciphertext.len);
+ sym_op->auth.digest.length = reference->digest.len;
+
+ if (auth_generate)
+ memset(sym_op->auth.digest.data, 0, reference->digest.len);
+ else
+ memcpy(sym_op->auth.digest.data,
+ reference->digest.data,
+ reference->digest.len);
+
+ TEST_HEXDUMP(stdout, "digest:",
+ sym_op->auth.digest.data,
+ sym_op->auth.digest.length);
+
+ sym_op->cipher.iv.data = (uint8_t *)rte_pktmbuf_prepend(
+ ut_params->ibuf, reference->iv.len);
+ TEST_ASSERT_NOT_NULL(sym_op->cipher.iv.data, "no room to prepend iv");
+
+ sym_op->cipher.iv.phys_addr = rte_pktmbuf_mtophys(ut_params->ibuf);
+ sym_op->cipher.iv.length = reference->iv.len;
+
+ memcpy(sym_op->cipher.iv.data, reference->iv.data, reference->iv.len);
+
+ sym_op->cipher.data.length = 0;
+ sym_op->cipher.data.offset = 0;
+
+ sym_op->auth.data.length = 0;
+ sym_op->auth.data.offset = 0;
+
+ return 0;
+}
+
+static int
+create_cipher_auth_operation(struct crypto_testsuite_params *ts_params,
+ struct crypto_unittest_params *ut_params,
+ const struct test_crypto_vector *reference,
+ unsigned int auth_generate)
+{
+ /* Generate Crypto op data structure */
+ ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
+ RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+ TEST_ASSERT_NOT_NULL(ut_params->op,
+ "Failed to allocate pktmbuf offload");
+
+ /* Set crypto operation data parameters */
+ rte_crypto_op_attach_sym_session(ut_params->op, ut_params->sess);
+
+ struct rte_crypto_sym_op *sym_op = ut_params->op->sym;
+
+ /* set crypto operation source mbuf */
+ sym_op->m_src = ut_params->ibuf;
+
+ /* digest */
+ sym_op->auth.digest.data = (uint8_t *)rte_pktmbuf_append(
+ ut_params->ibuf, reference->digest.len);
+
+ TEST_ASSERT_NOT_NULL(sym_op->auth.digest.data,
+ "no room to append auth tag");
+
+ sym_op->auth.digest.phys_addr = rte_pktmbuf_mtophys_offset(
+ ut_params->ibuf, reference->ciphertext.len);
+ sym_op->auth.digest.length = reference->digest.len;
+
+ if (auth_generate)
+ memset(sym_op->auth.digest.data, 0, reference->digest.len);
+ else
+ memcpy(sym_op->auth.digest.data,
+ reference->digest.data,
+ reference->digest.len);
+
+ TEST_HEXDUMP(stdout, "digest:",
+ sym_op->auth.digest.data,
+ sym_op->auth.digest.length);
+
+ sym_op->cipher.iv.data = (uint8_t *)rte_pktmbuf_prepend(
+ ut_params->ibuf, reference->iv.len);
+ TEST_ASSERT_NOT_NULL(sym_op->cipher.iv.data, "no room to prepend iv");
+
+ sym_op->cipher.iv.phys_addr = rte_pktmbuf_mtophys(ut_params->ibuf);
+ sym_op->cipher.iv.length = reference->iv.len;
+
+ memcpy(sym_op->cipher.iv.data, reference->iv.data, reference->iv.len);
+
+ sym_op->cipher.data.length = reference->ciphertext.len;
+ sym_op->cipher.data.offset = reference->iv.len;
+
+ sym_op->auth.data.length = reference->ciphertext.len;
+ sym_op->auth.data.offset = reference->iv.len;
+
+ return 0;
+}
+
+static int
+create_auth_verify_operation(struct crypto_testsuite_params *ts_params,
+ struct crypto_unittest_params *ut_params,
+ const struct test_crypto_vector *reference)
+{
+ return create_auth_operation(ts_params, ut_params, reference, 0);
+}
+
+static int
+create_auth_verify_GMAC_operation(
+ struct crypto_testsuite_params *ts_params,
+ struct crypto_unittest_params *ut_params,
+ const struct test_crypto_vector *reference)
+{
+ return create_auth_GMAC_operation(ts_params, ut_params, reference, 0);
+}
+
+static int
+create_cipher_auth_verify_operation(struct crypto_testsuite_params *ts_params,
+ struct crypto_unittest_params *ut_params,
+ const struct test_crypto_vector *reference)
+{
+ return create_cipher_auth_operation(ts_params, ut_params, reference, 0);
+}
+
+static int
+test_authentication_verify_fail_when_data_corruption(
+ struct crypto_testsuite_params *ts_params,
+ struct crypto_unittest_params *ut_params,
+ const struct test_crypto_vector *reference,
+ unsigned int data_corrupted)
+{
+ int retval;
+
+ uint8_t *plaintext;
+
+ /* Create session */
+ retval = create_auth_session(ut_params,
+ ts_params->valid_devs[0],
+ reference,
+ RTE_CRYPTO_AUTH_OP_VERIFY);
+ if (retval < 0)
+ return retval;
+
+ ut_params->ibuf = rte_pktmbuf_alloc(ts_params->mbuf_pool);
+ TEST_ASSERT_NOT_NULL(ut_params->ibuf,
+ "Failed to allocate input buffer in mempool");
+
+ /* clear mbuf payload */
+ memset(rte_pktmbuf_mtod(ut_params->ibuf, uint8_t *), 0,
+ rte_pktmbuf_tailroom(ut_params->ibuf));
+
+ plaintext = (uint8_t *)rte_pktmbuf_append(ut_params->ibuf,
+ reference->plaintext.len);
+ TEST_ASSERT_NOT_NULL(plaintext, "no room to append plaintext");
+ memcpy(plaintext, reference->plaintext.data, reference->plaintext.len);
+
+ TEST_HEXDUMP(stdout, "plaintext:", plaintext, reference->plaintext.len);
+
+ /* Create operation */
+ retval = create_auth_verify_operation(ts_params, ut_params, reference);
+
+ if (retval < 0)
+ return retval;
+
+ if (data_corrupted)
+ data_corruption(plaintext);
+ else
+ tag_corruption(plaintext, reference->plaintext.len);
+
+ ut_params->op = process_crypto_request(ts_params->valid_devs[0],
+ ut_params->op);
+ TEST_ASSERT_NOT_NULL(ut_params->op, "failed crypto process");
+ TEST_ASSERT_EQUAL(ut_params->op->status,
+ RTE_CRYPTO_OP_STATUS_AUTH_FAILED,
+ "authentication not failed");
+
+ ut_params->obuf = ut_params->op->sym->m_src;
+ TEST_ASSERT_NOT_NULL(ut_params->obuf, "failed to retrieve obuf");
+
+ return 0;
+}
+
+static int
+test_authentication_verify_GMAC_fail_when_corruption(
+ struct crypto_testsuite_params *ts_params,
+ struct crypto_unittest_params *ut_params,
+ const struct test_crypto_vector *reference,
+ unsigned int data_corrupted)
+{
+ int retval;
+
+ /* Create session */
+ retval = create_auth_cipher_session(ut_params,
+ ts_params->valid_devs[0],
+ reference,
+ RTE_CRYPTO_AUTH_OP_VERIFY,
+ RTE_CRYPTO_CIPHER_OP_DECRYPT);
+ if (retval < 0)
+ return retval;
+
+ ut_params->ibuf = rte_pktmbuf_alloc(ts_params->mbuf_pool);
+ TEST_ASSERT_NOT_NULL(ut_params->ibuf,
+ "Failed to allocate input buffer in mempool");
+
+ /* clear mbuf payload */
+ memset(rte_pktmbuf_mtod(ut_params->ibuf, uint8_t *), 0,
+ rte_pktmbuf_tailroom(ut_params->ibuf));
+
+ /* Create operation */
+ retval = create_auth_verify_GMAC_operation(ts_params,
+ ut_params,
+ reference);
+
+ if (retval < 0)
+ return retval;
+
+ if (data_corrupted)
+ data_corruption(ut_params->op->sym->auth.aad.data);
+ else
+ tag_corruption(ut_params->op->sym->auth.aad.data,
+ reference->aad.len);
+
+ ut_params->op = process_crypto_request(ts_params->valid_devs[0],
+ ut_params->op);
+ TEST_ASSERT_NOT_NULL(ut_params->op, "failed crypto process");
+ TEST_ASSERT_EQUAL(ut_params->op->status,
+ RTE_CRYPTO_OP_STATUS_AUTH_FAILED,
+ "authentication not failed");
+
+ ut_params->obuf = ut_params->op->sym->m_src;
+ TEST_ASSERT_NOT_NULL(ut_params->obuf, "failed to retrieve obuf");
+
+ return 0;
+}
+
+static int
+test_authenticated_decryption_fail_when_corruption(
+ struct crypto_testsuite_params *ts_params,
+ struct crypto_unittest_params *ut_params,
+ const struct test_crypto_vector *reference,
+ unsigned int data_corrupted)
+{
+ int retval;
+
+ uint8_t *ciphertext;
+
+ /* Create session */
+ retval = create_auth_cipher_session(ut_params,
+ ts_params->valid_devs[0],
+ reference,
+ RTE_CRYPTO_AUTH_OP_VERIFY,
+ RTE_CRYPTO_CIPHER_OP_DECRYPT);
+ if (retval < 0)
+ return retval;
+
+ ut_params->ibuf = rte_pktmbuf_alloc(ts_params->mbuf_pool);
+ TEST_ASSERT_NOT_NULL(ut_params->ibuf,
+ "Failed to allocate input buffer in mempool");
+
+ /* clear mbuf payload */
+ memset(rte_pktmbuf_mtod(ut_params->ibuf, uint8_t *), 0,
+ rte_pktmbuf_tailroom(ut_params->ibuf));
+
+ ciphertext = (uint8_t *)rte_pktmbuf_append(ut_params->ibuf,
+ reference->ciphertext.len);
+ TEST_ASSERT_NOT_NULL(ciphertext, "no room to append ciphertext");
+ memcpy(ciphertext, reference->ciphertext.data,
+ reference->ciphertext.len);
+
+ /* Create operation */
+ retval = create_cipher_auth_verify_operation(ts_params,
+ ut_params,
+ reference);
+
+ if (retval < 0)
+ return retval;
+
+ if (data_corrupted)
+ data_corruption(ciphertext);
+ else
+ tag_corruption(ciphertext, reference->ciphertext.len);
+
+ ut_params->op = process_crypto_request(ts_params->valid_devs[0],
+ ut_params->op);
+
+ TEST_ASSERT_NOT_NULL(ut_params->op, "failed crypto process");
+ TEST_ASSERT_EQUAL(ut_params->op->status,
+ RTE_CRYPTO_OP_STATUS_AUTH_FAILED,
+ "authentication not failed");
+
+ ut_params->obuf = ut_params->op->sym->m_src;
+ TEST_ASSERT_NOT_NULL(ut_params->obuf, "failed to retrieve obuf");
+
+ return 0;
+}
+
+static int
+test_authentication_verify_fail_when_data_corrupted(
+ struct crypto_testsuite_params *ts_params,
+ struct crypto_unittest_params *ut_params,
+ const struct test_crypto_vector *reference)
+{
+ return test_authentication_verify_fail_when_data_corruption(
+ ts_params, ut_params, reference, 1);
+}
+
+static int
+test_authentication_verify_fail_when_tag_corrupted(
+ struct crypto_testsuite_params *ts_params,
+ struct crypto_unittest_params *ut_params,
+ const struct test_crypto_vector *reference)
+{
+ return test_authentication_verify_fail_when_data_corruption(
+ ts_params, ut_params, reference, 0);
+}
+
+static int
+test_authentication_verify_GMAC_fail_when_data_corrupted(
+ struct crypto_testsuite_params *ts_params,
+ struct crypto_unittest_params *ut_params,
+ const struct test_crypto_vector *reference)
+{
+ return test_authentication_verify_GMAC_fail_when_corruption(
+ ts_params, ut_params, reference, 1);
+}
+
+static int
+test_authentication_verify_GMAC_fail_when_tag_corrupted(
+ struct crypto_testsuite_params *ts_params,
+ struct crypto_unittest_params *ut_params,
+ const struct test_crypto_vector *reference)
+{
+ return test_authentication_verify_GMAC_fail_when_corruption(
+ ts_params, ut_params, reference, 0);
+}
+
+static int
+test_authenticated_decryption_fail_when_data_corrupted(
+ struct crypto_testsuite_params *ts_params,
+ struct crypto_unittest_params *ut_params,
+ const struct test_crypto_vector *reference)
+{
+ return test_authenticated_decryption_fail_when_corruption(
+ ts_params, ut_params, reference, 1);
+}
+
+static int
+test_authenticated_decryption_fail_when_tag_corrupted(
+ struct crypto_testsuite_params *ts_params,
+ struct crypto_unittest_params *ut_params,
+ const struct test_crypto_vector *reference)
+{
+ return test_authenticated_decryption_fail_when_corruption(
+ ts_params, ut_params, reference, 0);
+}
+
+static int
+authentication_verify_HMAC_SHA1_fail_data_corrupt(void)
+{
+ return test_authentication_verify_fail_when_data_corrupted(
+ &testsuite_params, &unittest_params,
+ &hmac_sha1_test_crypto_vector);
+}
+
+static int
+authentication_verify_HMAC_SHA1_fail_tag_corrupt(void)
+{
+ return test_authentication_verify_fail_when_tag_corrupted(
+ &testsuite_params, &unittest_params,
+ &hmac_sha1_test_crypto_vector);
+}
+
+static int
+authentication_verify_AES128_GMAC_fail_data_corrupt(void)
+{
+ return test_authentication_verify_GMAC_fail_when_data_corrupted(
+ &testsuite_params, &unittest_params,
+ &aes128_gmac_test_vector);
+}
+
+static int
+authentication_verify_AES128_GMAC_fail_tag_corrupt(void)
+{
+ return test_authentication_verify_GMAC_fail_when_tag_corrupted(
+ &testsuite_params, &unittest_params,
+ &aes128_gmac_test_vector);
+}
+
+static int
+auth_decryption_AES128CBC_HMAC_SHA1_fail_data_corrupt(void)
+{
+ return test_authenticated_decryption_fail_when_data_corrupted(
+ &testsuite_params,
+ &unittest_params,
+ &aes128cbc_hmac_sha1_test_vector);
+}
+
+static int
+auth_decryption_AES128CBC_HMAC_SHA1_fail_tag_corrupt(void)
+{
+ return test_authenticated_decryption_fail_when_tag_corrupted(
+ &testsuite_params,
+ &unittest_params,
+ &aes128cbc_hmac_sha1_test_vector);
+}
+
+static struct unit_test_suite cryptodev_qat_testsuite = {
+ .suite_name = "Crypto QAT Unit Test Suite",
+ .setup = testsuite_setup,
+ .teardown = testsuite_teardown,
+ .unit_test_cases = {
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_device_configure_invalid_dev_id),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_device_configure_invalid_queue_pair_ids),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_queue_pair_descriptor_setup),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_multi_session),
+
+ TEST_CASE_ST(ut_setup, ut_teardown, test_AES_chain_qat_all),
+ TEST_CASE_ST(ut_setup, ut_teardown, test_3DES_chain_qat_all),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_3DES_cipheronly_qat_all),
+ TEST_CASE_ST(ut_setup, ut_teardown, test_stats),
+
+ /** AES GCM Authenticated Encryption */
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_encryption_test_case_1),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_encryption_test_case_2),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_encryption_test_case_3),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_encryption_test_case_4),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_encryption_test_case_5),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_encryption_test_case_6),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_encryption_test_case_7),
+
+ /** AES GCM Authenticated Decryption */
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_decryption_test_case_1),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_decryption_test_case_2),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_decryption_test_case_3),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_decryption_test_case_4),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_decryption_test_case_5),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_decryption_test_case_6),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_decryption_test_case_7),
+
+ /** AES GMAC Authentication */
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_AES_GMAC_authentication_test_case_1),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_AES_GMAC_authentication_verify_test_case_1),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_AES_GMAC_authentication_test_case_2),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_AES_GMAC_authentication_verify_test_case_2),
TEST_CASE_ST(ut_setup, ut_teardown,
test_AES_GMAC_authentication_test_case_3),
TEST_CASE_ST(ut_setup, ut_teardown,
@@ -4863,6 +6162,93 @@ static struct unit_test_suite cryptodev_aesni_mb_testsuite = {
}
};
+static struct unit_test_suite cryptodev_libcrypto_testsuite = {
+ .suite_name = "Crypto Device LIBCRYPTO Unit Test Suite",
+ .setup = testsuite_setup,
+ .teardown = testsuite_teardown,
+ .unit_test_cases = {
+ TEST_CASE_ST(ut_setup, ut_teardown, test_multi_session),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_multi_session_random_usage),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_AES_chain_libcrypto_all),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_AES_cipheronly_libcrypto_all),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_3DES_chain_libcrypto_all),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_3DES_cipheronly_libcrypto_all),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_authonly_libcrypto_all),
+
+ /** AES GCM Authenticated Encryption */
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_encryption_test_case_1),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_encryption_test_case_2),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_encryption_test_case_3),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_encryption_test_case_4),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_encryption_test_case_5),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_encryption_test_case_6),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_encryption_test_case_7),
+
+ /** AES GCM Authenticated Decryption */
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_decryption_test_case_1),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_decryption_test_case_2),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_decryption_test_case_3),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_decryption_test_case_4),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_decryption_test_case_5),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_decryption_test_case_6),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_decryption_test_case_7),
+
+ /** AES GMAC Authentication */
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_AES_GMAC_authentication_test_case_1),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_AES_GMAC_authentication_verify_test_case_1),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_AES_GMAC_authentication_test_case_2),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_AES_GMAC_authentication_verify_test_case_2),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_AES_GMAC_authentication_test_case_3),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_AES_GMAC_authentication_verify_test_case_3),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_AES_GMAC_authentication_test_case_4),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_AES_GMAC_authentication_verify_test_case_4),
+
+ /** Negative tests */
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ authentication_verify_HMAC_SHA1_fail_data_corrupt),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ authentication_verify_HMAC_SHA1_fail_tag_corrupt),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ authentication_verify_AES128_GMAC_fail_data_corrupt),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ authentication_verify_AES128_GMAC_fail_tag_corrupt),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ auth_decryption_AES128CBC_HMAC_SHA1_fail_data_corrupt),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ auth_decryption_AES128CBC_HMAC_SHA1_fail_tag_corrupt),
+
+ TEST_CASES_END() /**< NULL terminate unit test array */
+ }
+};
+
static struct unit_test_suite cryptodev_aesni_gcm_testsuite = {
.suite_name = "Crypto Device AESNI GCM Unit Test Suite",
.setup = testsuite_setup,
@@ -5106,6 +6492,14 @@ test_cryptodev_aesni_mb(void /*argv __rte_unused, int argc __rte_unused*/)
}
static int
+test_cryptodev_libcrypto(void)
+{
+ gbl_cryptodev_type = RTE_CRYPTODEV_LIBCRYPTO_PMD;
+
+ return unit_test_suite_runner(&cryptodev_libcrypto_testsuite);
+}
+
+static int
test_cryptodev_aesni_gcm(void)
{
gbl_cryptodev_type = RTE_CRYPTODEV_AESNI_GCM_PMD;
@@ -5147,6 +6541,7 @@ test_cryptodev_sw_zuc(void /*argv __rte_unused, int argc __rte_unused*/)
REGISTER_TEST_COMMAND(cryptodev_qat_autotest, test_cryptodev_qat);
REGISTER_TEST_COMMAND(cryptodev_aesni_mb_autotest, test_cryptodev_aesni_mb);
+REGISTER_TEST_COMMAND(cryptodev_libcrypto_autotest, test_cryptodev_libcrypto);
REGISTER_TEST_COMMAND(cryptodev_aesni_gcm_autotest, test_cryptodev_aesni_gcm);
REGISTER_TEST_COMMAND(cryptodev_null_autotest, test_cryptodev_null);
REGISTER_TEST_COMMAND(cryptodev_sw_snow3g_autotest, test_cryptodev_sw_snow3g);
diff --git a/app/test/test_cryptodev.h b/app/test/test_cryptodev.h
index 3c37c32..a9089aa 100644
--- a/app/test/test_cryptodev.h
+++ b/app/test/test_cryptodev.h
@@ -63,6 +63,7 @@
#define DIGEST_BYTE_LENGTH_SNOW3G_UIA2 (BYTE_LENGTH(32))
#define DIGEST_BYTE_LENGTH_KASUMI_F9 (BYTE_LENGTH(32))
#define AES_XCBC_MAC_KEY_SZ (16)
+#define DIGEST_BYTE_LENGTH_AES_GCM (BYTE_LENGTH(128))
#define TRUNCATED_DIGEST_BYTE_LENGTH_SHA1 (12)
#define TRUNCATED_DIGEST_BYTE_LENGTH_SHA224 (16)
diff --git a/app/test/test_cryptodev_aes_test_vectors.h b/app/test/test_cryptodev_aes_test_vectors.h
index 92c0cc2..e922cd3 100644
--- a/app/test/test_cryptodev_aes_test_vectors.h
+++ b/app/test/test_cryptodev_aes_test_vectors.h
@@ -634,12 +634,204 @@ static const struct blockcipher_test_data aes_test_data_9 = {
}
};
+static const uint8_t ciphertext512_aes192cbc[] = {
+ 0x45, 0xEE, 0x9A, 0xEA, 0x3C, 0x03, 0xFC, 0x4C,
+ 0x84, 0x36, 0xB0, 0xDA, 0xB0, 0xDC, 0xF3, 0x5B,
+ 0x75, 0xA7, 0xBE, 0x0E, 0xC0, 0x8D, 0x6C, 0xF8,
+ 0xC1, 0x0F, 0xD0, 0x35, 0x1D, 0x82, 0xAE, 0x7C,
+ 0x57, 0xC5, 0x7A, 0x55, 0x87, 0x1B, 0xD4, 0x03,
+ 0x0A, 0x64, 0xC9, 0xE0, 0xF4, 0xC7, 0x6F, 0x57,
+ 0x52, 0xC6, 0x73, 0xBA, 0x84, 0x0B, 0x5B, 0x89,
+ 0x21, 0xD2, 0x9B, 0x88, 0x68, 0xF5, 0xA9, 0x7F,
+ 0x3F, 0x49, 0xEB, 0xF4, 0xD4, 0x52, 0xD2, 0x64,
+ 0x80, 0xB2, 0x53, 0xDA, 0x19, 0xF6, 0x10, 0x24,
+ 0x23, 0x26, 0x7A, 0x7C, 0x07, 0x57, 0x4B, 0x0E,
+ 0x58, 0x49, 0x61, 0xD1, 0xDC, 0x9A, 0x32, 0x6B,
+ 0x0F, 0x43, 0x9E, 0x4D, 0xB4, 0x07, 0x4E, 0xB3,
+ 0x51, 0x74, 0xDE, 0x29, 0xBC, 0x98, 0xF9, 0xDF,
+ 0x78, 0x9A, 0x18, 0x9C, 0xD6, 0x7A, 0x55, 0x7C,
+ 0xE6, 0x1D, 0x5C, 0x1A, 0x99, 0xD2, 0xC3, 0x7B,
+ 0x9F, 0x96, 0x74, 0x2D, 0xE0, 0xEF, 0xD1, 0xE3,
+ 0x08, 0x9F, 0xAF, 0xE6, 0xED, 0xCA, 0xE1, 0xEA,
+ 0x23, 0x6F, 0x7C, 0x81, 0xA8, 0xC0, 0x5B, 0x8B,
+ 0x53, 0x90, 0x51, 0x2D, 0x0F, 0xF6, 0x7D, 0xA7,
+ 0x1C, 0xBD, 0x83, 0x84, 0x54, 0xA4, 0x15, 0xFB,
+ 0x3E, 0x25, 0xA7, 0x3A, 0x0A, 0x73, 0xD9, 0x88,
+ 0x6F, 0x80, 0x78, 0x95, 0x7F, 0x60, 0xAA, 0x86,
+ 0x8A, 0xFC, 0xDF, 0xC1, 0xCB, 0xDE, 0xBB, 0x25,
+ 0x52, 0x20, 0xC6, 0x79, 0xD4, 0x0F, 0x25, 0xE7,
+ 0xDB, 0xB2, 0x17, 0xA4, 0x6F, 0x3C, 0x6F, 0x91,
+ 0xF6, 0x44, 0x1E, 0xB6, 0x85, 0xBC, 0x7A, 0x14,
+ 0x10, 0x72, 0xBD, 0x16, 0x63, 0x39, 0x9E, 0x7B,
+ 0x84, 0x5B, 0x17, 0x61, 0xB1, 0x5D, 0x82, 0x0B,
+ 0x6D, 0x37, 0xD7, 0x79, 0xB8, 0x24, 0x91, 0x30,
+ 0x82, 0x91, 0x02, 0xB1, 0x18, 0x4B, 0xE0, 0xF4,
+ 0x13, 0x1B, 0xB2, 0x4C, 0xDA, 0xB8, 0x99, 0x96,
+ 0x83, 0x2F, 0xBE, 0x53, 0x8D, 0xDE, 0xFA, 0xAD,
+ 0xF6, 0x5C, 0xDB, 0xE5, 0x66, 0x26, 0x8F, 0x13,
+ 0x2B, 0x76, 0x47, 0x73, 0xDE, 0x1A, 0x74, 0xA6,
+ 0x30, 0xAF, 0x42, 0xA0, 0xE5, 0xD2, 0x8F, 0xC2,
+ 0xED, 0x3E, 0x9E, 0x29, 0x54, 0x3C, 0xDE, 0x9F,
+ 0x5D, 0x30, 0x2B, 0x63, 0xFB, 0xE3, 0xB1, 0x07,
+ 0xEE, 0x74, 0x4A, 0xAF, 0xB1, 0x20, 0x8D, 0xEC,
+ 0xE6, 0x78, 0x16, 0x8D, 0xA4, 0x6E, 0x34, 0x7D,
+ 0x47, 0xFB, 0x0B, 0xC1, 0x32, 0xD7, 0x0D, 0x6C,
+ 0x6F, 0x93, 0x9C, 0x5E, 0xEF, 0x1F, 0x9C, 0x45,
+ 0x80, 0x6B, 0x74, 0xA6, 0x81, 0xF2, 0xF6, 0xFA,
+ 0xAA, 0x9D, 0x4F, 0xCA, 0xB5, 0x90, 0x59, 0xB0,
+ 0x3B, 0xF2, 0xF0, 0x75, 0xFD, 0x8A, 0xD8, 0x97,
+ 0x65, 0x88, 0x56, 0x4C, 0x44, 0xDF, 0x73, 0xF7,
+ 0x56, 0x9C, 0x48, 0x7E, 0xB0, 0x1F, 0x1D, 0x7D,
+ 0x6A, 0x11, 0xF5, 0xC2, 0xF4, 0x17, 0xEF, 0x58,
+ 0xD8, 0x2A, 0xAF, 0x56, 0x2F, 0xCF, 0xEC, 0xA4,
+ 0x58, 0x8B, 0x60, 0xCE, 0xD4, 0x0F, 0x9C, 0x21,
+ 0xEC, 0x3E, 0x74, 0x7B, 0x81, 0x3D, 0x69, 0xC6,
+ 0x5E, 0x12, 0x83, 0xE9, 0xEF, 0x81, 0x58, 0x36,
+ 0x6A, 0x60, 0x0F, 0x54, 0x28, 0x11, 0xF9, 0x64,
+ 0x36, 0xAD, 0x79, 0xF5, 0x1C, 0x74, 0xD0, 0xC3,
+ 0x7B, 0x61, 0xE1, 0x92, 0xB0, 0x13, 0x91, 0x87,
+ 0x32, 0x1F, 0xF2, 0x5A, 0xDA, 0x25, 0x69, 0xEB,
+ 0xD7, 0x32, 0x7F, 0xF5, 0x23, 0x21, 0x54, 0x47,
+ 0x7B, 0x1B, 0x33, 0xB0, 0x3D, 0xF6, 0xE2, 0x7E,
+ 0x3E, 0xA2, 0x9E, 0xCA, 0x48, 0x0B, 0x4A, 0x29,
+ 0x81, 0xD4, 0x4E, 0xD5, 0x69, 0xFB, 0xCD, 0x37,
+ 0x8A, 0xC1, 0x5B, 0x50, 0xFF, 0xB5, 0x7D, 0x43,
+ 0x0F, 0xAE, 0xA6, 0xC2, 0xE5, 0x8F, 0x45, 0xB2,
+ 0x85, 0x99, 0x02, 0xA2, 0x9B, 0xBE, 0x90, 0x43,
+ 0x4F, 0x2F, 0x50, 0xE2, 0x77, 0x62, 0xD9, 0xCC
+};
+
+/** AES-192-CBC test vector */
+static const struct blockcipher_test_data aes_test_data_10 = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .cipher_key = {
+ .data = {
+ 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
+ 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A,
+ 0xD4, 0xC3, 0xA3, 0xAA, 0x33, 0x62, 0x61, 0xE0
+ },
+ .len = 24
+ },
+ .iv = {
+ .data = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
+ },
+ .len = 16
+ },
+ .plaintext = {
+ .data = plaintext_aes_common,
+ .len = 512
+ },
+ .ciphertext = {
+ .data = ciphertext512_aes192cbc,
+ .len = 512
+ }
+};
+
+static const uint8_t ciphertext512_aes256cbc[] = {
+ 0xF3, 0xDD, 0xF0, 0x0B, 0xFF, 0xA2, 0x6A, 0x04,
+ 0xBE, 0xDA, 0x52, 0xA6, 0xFE, 0x6B, 0xA6, 0xA7,
+ 0x48, 0x1D, 0x7D, 0x98, 0x65, 0xDB, 0xEF, 0x06,
+ 0x26, 0xB5, 0x8E, 0xEB, 0x05, 0x0E, 0x77, 0x98,
+ 0x17, 0x8E, 0xD0, 0xD4, 0x7B, 0x92, 0x8F, 0x5C,
+ 0xD0, 0x74, 0x5C, 0xA8, 0x4B, 0x54, 0xB6, 0x2F,
+ 0x83, 0x72, 0x2C, 0xFF, 0x72, 0xE9, 0xE4, 0x15,
+ 0x4C, 0x32, 0xAF, 0xC8, 0xC9, 0x89, 0x3C, 0x6E,
+ 0x31, 0xD5, 0xC0, 0x16, 0xC0, 0x31, 0x7D, 0x11,
+ 0xAB, 0xCB, 0xDE, 0xD2, 0xD6, 0xAA, 0x76, 0x5E,
+ 0xBA, 0xF6, 0xE2, 0x92, 0xCB, 0x86, 0x07, 0xFA,
+ 0xD4, 0x9E, 0x83, 0xED, 0xFD, 0xB8, 0x70, 0x54,
+ 0x6B, 0xBE, 0xEC, 0x72, 0xDD, 0x28, 0x5E, 0x95,
+ 0x78, 0xA5, 0x28, 0x43, 0x3D, 0x6D, 0xB1, 0xD9,
+ 0x69, 0x1F, 0xC9, 0x66, 0x0E, 0x32, 0x44, 0x08,
+ 0xD2, 0xAE, 0x2C, 0x43, 0xF2, 0xD0, 0x7D, 0x26,
+ 0x70, 0xE5, 0xA1, 0xCA, 0x37, 0xE9, 0x7D, 0xC7,
+ 0xA3, 0xFA, 0x81, 0x91, 0x64, 0xAA, 0x64, 0x91,
+ 0x9A, 0x95, 0x2D, 0xC9, 0xF9, 0xCE, 0xFE, 0x9F,
+ 0xC4, 0xD8, 0x81, 0xBE, 0x57, 0x84, 0xC5, 0x02,
+ 0xDB, 0x30, 0xC1, 0xD9, 0x0E, 0xA0, 0xA6, 0x00,
+ 0xD6, 0xF3, 0x52, 0x7E, 0x0D, 0x23, 0x6B, 0x2B,
+ 0x34, 0x99, 0x1F, 0x70, 0x27, 0x6D, 0x58, 0x84,
+ 0x93, 0x77, 0xB8, 0x3E, 0xF1, 0x71, 0x58, 0x42,
+ 0x8B, 0x2B, 0xC8, 0x6D, 0x05, 0x84, 0xFF, 0x4E,
+ 0x85, 0xEF, 0x4A, 0x9D, 0x91, 0x6A, 0xD5, 0xE1,
+ 0xAF, 0x01, 0xEB, 0x83, 0x8F, 0x23, 0x7C, 0x7F,
+ 0x12, 0x91, 0x05, 0xF0, 0x4E, 0xD9, 0x17, 0x62,
+ 0x75, 0xBB, 0xAC, 0x97, 0xEE, 0x3B, 0x4E, 0xC7,
+ 0xE5, 0x92, 0xF8, 0x9D, 0x4C, 0xF9, 0xEE, 0x55,
+ 0x18, 0xBB, 0xCC, 0xB4, 0xF2, 0x59, 0xB9, 0xFC,
+ 0x7A, 0x0F, 0x98, 0xD4, 0x8B, 0xFE, 0xF7, 0x83,
+ 0x46, 0xE2, 0x83, 0x33, 0x3E, 0x95, 0x8D, 0x17,
+ 0x1E, 0x85, 0xF8, 0x8C, 0x51, 0xB0, 0x6C, 0xB5,
+ 0x5E, 0x95, 0xBA, 0x4B, 0x69, 0x1B, 0x48, 0x69,
+ 0x0B, 0x8F, 0xA5, 0x18, 0x13, 0xB9, 0x77, 0xD1,
+ 0x80, 0x32, 0x32, 0x6D, 0x53, 0xA1, 0x95, 0x40,
+ 0x96, 0x8A, 0xCC, 0xA3, 0x69, 0xF8, 0x9F, 0xB5,
+ 0x8E, 0xD2, 0x68, 0x07, 0x4F, 0xA7, 0xEC, 0xF8,
+ 0x20, 0x21, 0x58, 0xF8, 0xD8, 0x9E, 0x5F, 0x40,
+ 0xBA, 0xB9, 0x76, 0x57, 0x3B, 0x17, 0xAD, 0xEE,
+ 0xCB, 0xDF, 0x07, 0xC1, 0xDF, 0x66, 0xA8, 0x0D,
+ 0xC2, 0xCE, 0x8F, 0x79, 0xC3, 0x32, 0xE0, 0x8C,
+ 0xFE, 0x5A, 0xF3, 0x55, 0x27, 0x73, 0x6F, 0xA1,
+ 0x54, 0xC6, 0xFC, 0x28, 0x9D, 0xBE, 0x97, 0xB9,
+ 0x54, 0x97, 0x72, 0x3A, 0x61, 0xAF, 0x6F, 0xDE,
+ 0xF8, 0x0E, 0xBB, 0x6B, 0x96, 0x84, 0xDD, 0x9B,
+ 0x62, 0xBA, 0x47, 0xB5, 0xC9, 0x3B, 0x4E, 0x8C,
+ 0x78, 0x2A, 0xCC, 0x0A, 0x69, 0x54, 0x25, 0x5E,
+ 0x8B, 0xAC, 0x56, 0xD9, 0xFE, 0x48, 0xBA, 0xCE,
+ 0xA9, 0xCE, 0xA6, 0x1D, 0xBF, 0x3E, 0x3C, 0x66,
+ 0x40, 0x71, 0x79, 0xAD, 0x5B, 0x26, 0xAD, 0xBE,
+ 0x58, 0x13, 0x64, 0x60, 0x7C, 0x05, 0xFC, 0xE3,
+ 0x51, 0x7A, 0xF2, 0xCC, 0x54, 0x16, 0x2C, 0xA4,
+ 0xCE, 0x5F, 0x59, 0x12, 0x77, 0xEB, 0xD9, 0x23,
+ 0xE3, 0x86, 0xFB, 0xD7, 0x48, 0x76, 0x9D, 0xE3,
+ 0x89, 0x87, 0x39, 0xFA, 0x7B, 0x21, 0x0B, 0x76,
+ 0xB2, 0xED, 0x1C, 0x27, 0x4B, 0xD5, 0x27, 0x05,
+ 0x8C, 0x7D, 0x58, 0x6C, 0xCA, 0xA5, 0x54, 0x9A,
+ 0x0F, 0xCB, 0xE9, 0x88, 0x31, 0xAD, 0x49, 0xEE,
+ 0x38, 0xFB, 0xC9, 0xFB, 0xB4, 0x7A, 0x00, 0x58,
+ 0x20, 0x32, 0xD3, 0x53, 0x5A, 0xDD, 0x74, 0x95,
+ 0x60, 0x59, 0x09, 0xAE, 0x7E, 0xEC, 0x74, 0xA3,
+ 0xB7, 0x1C, 0x6D, 0xF2, 0xAE, 0x79, 0xA4, 0x7C
+};
+
+/** AES-256-CBC test vector */
+static const struct blockcipher_test_data aes_test_data_11 = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .cipher_key = {
+ .data = {
+ 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
+ 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A,
+ 0xD4, 0xC3, 0xA3, 0xAA, 0x33, 0x62, 0x61, 0xE0,
+ 0x37, 0x07, 0xB8, 0x23, 0xA2, 0xA3, 0xB5, 0x8D
+ },
+ .len = 32
+ },
+ .iv = {
+ .data = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
+ },
+ .len = 16
+ },
+ .plaintext = {
+ .data = plaintext_aes_common,
+ .len = 512
+ },
+ .ciphertext = {
+ .data = ciphertext512_aes256cbc,
+ .len = 512
+ }
+};
+
static const struct blockcipher_test_case aes_chain_test_cases[] = {
{
.test_descr = "AES-128-CTR HMAC-SHA1 Encryption Digest",
.test_data = &aes_test_data_1,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
@@ -648,6 +840,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
.test_data = &aes_test_data_1,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
@@ -669,6 +862,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
.test_data = &aes_test_data_3,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
@@ -677,6 +871,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
.test_data = &aes_test_data_3,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
@@ -684,6 +879,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
.test_data = &aes_test_data_4,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
@@ -692,6 +888,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
.test_data = &aes_test_data_4,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
@@ -699,6 +896,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
.test_data = &aes_test_data_5,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
@@ -707,6 +905,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
.test_data = &aes_test_data_5,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
@@ -714,6 +913,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
.test_data = &aes_test_data_6,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
@@ -722,7 +922,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
.test_data = &aes_test_data_6,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.feature_mask = BLOCKCIPHER_TEST_FEATURE_SESSIONLESS,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
},
{
.test_descr = "AES-128-CBC HMAC-SHA512 Decryption Digest "
@@ -730,6 +931,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
.test_data = &aes_test_data_6,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
@@ -752,7 +954,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
.test_data = &aes_test_data_4,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
},
{
.test_descr = "AES-128-CBC HMAC-SHA1 Decryption Digest "
@@ -760,13 +963,15 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
.test_data = &aes_test_data_4,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
},
{
.test_descr = "AES-128-CBC HMAC-SHA224 Encryption Digest",
.test_data = &aes_test_data_8,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
@@ -775,6 +980,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
.test_data = &aes_test_data_8,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
@@ -782,6 +988,7 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
.test_data = &aes_test_data_9,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
@@ -790,8 +997,101 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
.test_data = &aes_test_data_9,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
+ {
+ .test_descr = "AES-128-CBC HMAC-SHA1 Encryption Digest "
+ "Sessionless",
+ .test_data = &aes_test_data_4,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
+ .feature_mask = BLOCKCIPHER_TEST_FEATURE_SESSIONLESS,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr =
+ "AES-128-CBC HMAC-SHA1 Decryption Digest "
+ "Verify Sessionless",
+ .test_data = &aes_test_data_4,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
+ .feature_mask = BLOCKCIPHER_TEST_FEATURE_SESSIONLESS,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+};
+
+static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
+ {
+ .test_descr = "AES-128-CBC Encryption",
+ .test_data = &aes_test_data_4,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "AES-128-CBC Decryption",
+ .test_data = &aes_test_data_4,
+ .op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "AES-192-CBC Encryption",
+ .test_data = &aes_test_data_10,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "AES-192-CBC Decryption",
+ .test_data = &aes_test_data_10,
+ .op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "AES-256-CBC Encryption",
+ .test_data = &aes_test_data_11,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "AES-256-CBC Decryption",
+ .test_data = &aes_test_data_11,
+ .op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "AES-128-CTR Encryption",
+ .test_data = &aes_test_data_1,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "AES-128-CTR Decryption",
+ .test_data = &aes_test_data_1,
+ .op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "AES-192-CTR Encryption",
+ .test_data = &aes_test_data_2,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "AES-192-CTR Decryption",
+ .test_data = &aes_test_data_2,
+ .op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "AES-256-CTR Encryption",
+ .test_data = &aes_test_data_3,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "AES-256-CTR Decryption",
+ .test_data = &aes_test_data_3,
+ .op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
};
#endif /* TEST_CRYPTODEV_AES_TEST_VECTORS_H_ */
diff --git a/app/test/test_cryptodev_blockcipher.c b/app/test/test_cryptodev_blockcipher.c
index a1d8c8b..deb2ada 100644
--- a/app/test/test_cryptodev_blockcipher.c
+++ b/app/test/test_cryptodev_blockcipher.c
@@ -43,6 +43,8 @@
#include "test.h"
#include "test_cryptodev_blockcipher.h"
#include "test_cryptodev_aes_test_vectors.h"
+#include "test_cryptodev_des_test_vectors.h"
+#include "test_cryptodev_hash_test_vectors.h"
static int
test_blockcipher_one_case(const struct blockcipher_test_case *t,
@@ -79,6 +81,7 @@ test_blockcipher_one_case(const struct blockcipher_test_case *t,
switch (cryptodev_type) {
case RTE_CRYPTODEV_QAT_SYM_PMD:
+ case RTE_CRYPTODEV_LIBCRYPTO_PMD:
digest_len = tdata->digest.len;
break;
case RTE_CRYPTODEV_AESNI_MB_PMD:
@@ -472,9 +475,25 @@ test_blockcipher_all_tests(struct rte_mempool *mbuf_pool,
tcs = aes_chain_test_cases;
break;
case BLKCIPHER_AES_CIPHERONLY_TYPE:
+ n_test_cases = sizeof(aes_cipheronly_test_cases) /
+ sizeof(aes_cipheronly_test_cases[0]);
+ tcs = aes_cipheronly_test_cases;
+ break;
case BLKCIPHER_3DES_CHAIN_TYPE:
+ n_test_cases = sizeof(triple_des_chain_test_cases) /
+ sizeof(triple_des_chain_test_cases[0]);
+ tcs = triple_des_chain_test_cases;
+ break;
case BLKCIPHER_3DES_CIPHERONLY_TYPE:
+ n_test_cases = sizeof(triple_des_cipheronly_test_cases) /
+ sizeof(triple_des_cipheronly_test_cases[0]);
+ tcs = triple_des_cipheronly_test_cases;
+ break;
case BLKCIPHER_AUTHONLY_TYPE:
+ n_test_cases = sizeof(hash_test_cases) /
+ sizeof(hash_test_cases[0]);
+ tcs = hash_test_cases;
+ break;
default:
break;
}
@@ -486,6 +505,9 @@ test_blockcipher_all_tests(struct rte_mempool *mbuf_pool,
case RTE_CRYPTODEV_QAT_SYM_PMD:
target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT;
break;
+ case RTE_CRYPTODEV_LIBCRYPTO_PMD:
+ target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO;
+ break;
default:
TEST_ASSERT(0, "Unrecognized cryptodev type");
break;
diff --git a/app/test/test_cryptodev_blockcipher.h b/app/test/test_cryptodev_blockcipher.h
index 3e25d4d..cce094d 100644
--- a/app/test/test_cryptodev_blockcipher.h
+++ b/app/test/test_cryptodev_blockcipher.h
@@ -48,6 +48,7 @@
#define BLOCKCIPHER_TEST_TARGET_PMD_MB 0x0001 /* Multi-buffer flag */
#define BLOCKCIPHER_TEST_TARGET_PMD_QAT 0x0002 /* QAT flag */
+#define BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO 0x0004 /* SW LIBCRYPTO flag */
#define BLOCKCIPHER_TEST_OP_CIPHER (BLOCKCIPHER_TEST_OP_ENCRYPT | \
BLOCKCIPHER_TEST_OP_DECRYPT)
diff --git a/app/test/test_cryptodev_des_test_vectors.h b/app/test/test_cryptodev_des_test_vectors.h
new file mode 100644
index 0000000..687ccbe
--- /dev/null
+++ b/app/test/test_cryptodev_des_test_vectors.h
@@ -0,0 +1,955 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef TEST_CRYPTODEV_DES_TEST_VECTORS_H_
+#define TEST_CRYPTODEV_DES_TEST_VECTORS_H_
+
+static const uint8_t plaintext_des[] = {
+ "What a lousy earth! He wondered how many people "
+ "were destitute that same night even in his own "
+ "prosperous country, how many homes were "
+ "shanties, how many husbands were drunk and "
+ "wives socked, and how many children were "
+ "bullied, abused, or abandoned. How many "
+ "families hungered for food they could not "
+ "afford to buy? How many hearts were broken? How "
+ "many suicides would take place that same night, "
+ "how many people would go insane? How many "
+ "cockroaches and landlords would triumph? How "
+ "many winners were losers, successes failures, "
+ "and rich men poor men? How many wise guys were "
+ "stupid? How many happy endings were unhappy "
+ "endings? How many honest men were liars, brave "
+ "men cowards, loyal men traitors, how many "
+ "sainted men were corrupt, how many people in "
+ "positions of trust had sold their souls to "
+ "bodyguards, how many had never had souls? How "
+ "many straight-and-narrow paths were crooked "
+ "paths? How many best families were worst "
+ "families and how many good people were bad "
+ "people? When you added them all up and then "
+ "subtracted, you might be left with only the "
+ "children, and perhaps with Albert Einstein and "
+ "an old violinist or sculptor somewhere."
+};
+
+static const uint8_t ciphertext512_des128ctr[] = {
+ 0x13, 0x39, 0x3B, 0xBC, 0x1D, 0xE3, 0x23, 0x09,
+ 0x9B, 0x08, 0xD1, 0x09, 0x52, 0x93, 0x78, 0x29,
+ 0x11, 0x21, 0xBA, 0x01, 0x15, 0xCD, 0xEC, 0xAA,
+ 0x79, 0x77, 0x58, 0xAE, 0xAE, 0xBC, 0x97, 0x33,
+ 0x94, 0xA9, 0x2D, 0xC0, 0x0A, 0xA9, 0xA4, 0x4B,
+ 0x19, 0x07, 0x88, 0x06, 0x7E, 0x81, 0x0F, 0xB5,
+ 0x60, 0xCF, 0xA7, 0xC3, 0x2A, 0x43, 0xFF, 0x16,
+ 0x3A, 0x5F, 0x11, 0x2D, 0x11, 0x38, 0x37, 0x94,
+ 0x2A, 0xC8, 0x3D, 0x20, 0xBB, 0x93, 0x95, 0x54,
+ 0x12, 0xFF, 0x0C, 0x47, 0x89, 0x7D, 0x73, 0xD1,
+ 0x2E, 0x3A, 0x80, 0x52, 0xA8, 0x92, 0x93, 0x99,
+ 0x16, 0xB8, 0x12, 0x1B, 0x8B, 0xA8, 0xC1, 0x81,
+ 0x95, 0x18, 0x82, 0xD6, 0x5A, 0xA7, 0xFE, 0xCF,
+ 0xC4, 0xAC, 0x85, 0x91, 0x0C, 0x2F, 0x1D, 0x10,
+ 0x9A, 0x65, 0x07, 0xB0, 0x2E, 0x5A, 0x2D, 0x48,
+ 0x26, 0xF8, 0x17, 0x7A, 0x53, 0xD6, 0xB8, 0xDF,
+ 0xB1, 0x10, 0x48, 0x7E, 0x8F, 0xBE, 0x2E, 0xA1,
+ 0x0D, 0x9E, 0xA9, 0xF1, 0x3B, 0x3B, 0x33, 0xCD,
+ 0xDC, 0x52, 0x7E, 0xC0, 0x0E, 0xA0, 0xD8, 0xA7,
+ 0xC6, 0x34, 0x5A, 0xAA, 0x29, 0x8B, 0xA9, 0xAC,
+ 0x1F, 0x78, 0xAD, 0xEE, 0x34, 0x59, 0x30, 0xFB,
+ 0x2A, 0x20, 0x3D, 0x4D, 0x30, 0xA7, 0x7D, 0xD8,
+ 0xA0, 0xC6, 0xA2, 0xD3, 0x9A, 0xFB, 0x50, 0x97,
+ 0x4D, 0x25, 0xA2, 0x37, 0x51, 0x54, 0xB7, 0xEB,
+ 0xED, 0x77, 0xDB, 0x94, 0x35, 0x8B, 0x70, 0x95,
+ 0x4A, 0x00, 0xA7, 0xF1, 0x8A, 0x66, 0x0E, 0xC6,
+ 0x05, 0x7B, 0x69, 0x05, 0x42, 0x03, 0x96, 0x2C,
+ 0x55, 0x00, 0x1B, 0xC0, 0x19, 0x4D, 0x0D, 0x2E,
+ 0xF5, 0x81, 0x11, 0x64, 0xCA, 0xBB, 0xF2, 0x0F,
+ 0x9C, 0x60, 0xE2, 0xCC, 0x02, 0x6E, 0x83, 0xD5,
+ 0x24, 0xF4, 0x12, 0x0E, 0x6A, 0xEA, 0x4F, 0x6C,
+ 0x79, 0x69, 0x65, 0x67, 0xDB, 0xF7, 0xEA, 0x98,
+ 0x5D, 0x56, 0x98, 0xB7, 0x88, 0xE7, 0x23, 0xC9,
+ 0x17, 0x32, 0x92, 0x33, 0x5A, 0x0C, 0x15, 0x20,
+ 0x3B, 0x1C, 0xF9, 0x0F, 0x4D, 0xD1, 0xE8, 0xE6,
+ 0x9E, 0x5E, 0x24, 0x1B, 0xA4, 0xB8, 0xB9, 0xE9,
+ 0x2F, 0xFC, 0x89, 0xB4, 0xB9, 0xF4, 0xA6, 0xAD,
+ 0x55, 0xF4, 0xDF, 0x58, 0x63, 0x25, 0xE3, 0x41,
+ 0x70, 0xDF, 0x10, 0xE7, 0x13, 0x87, 0x8D, 0xB3,
+ 0x62, 0x4F, 0xF5, 0x86, 0x85, 0x8F, 0x59, 0xF0,
+ 0x21, 0x0E, 0x8F, 0x11, 0xAD, 0xBF, 0xDD, 0x61,
+ 0x68, 0x3F, 0x54, 0x57, 0x49, 0x38, 0xC8, 0x24,
+ 0x8E, 0x0A, 0xAC, 0xCA, 0x2C, 0x36, 0x3E, 0x5F,
+ 0x0A, 0xCE, 0xFD, 0x1A, 0x60, 0x63, 0x5A, 0xE6,
+ 0x06, 0x64, 0xB5, 0x94, 0x3C, 0xC9, 0xAF, 0x7C,
+ 0xCD, 0x49, 0x10, 0xCF, 0xAF, 0x0E, 0x2E, 0x79,
+ 0x27, 0xB2, 0x67, 0x02, 0xED, 0xEE, 0x80, 0x77,
+ 0x7C, 0x6D, 0x4B, 0xDB, 0xCF, 0x8D, 0x68, 0x00,
+ 0x2E, 0xD9, 0xF0, 0x8E, 0x08, 0xBF, 0xA6, 0x9B,
+ 0xFE, 0xA4, 0xFB, 0x19, 0x46, 0xAF, 0x1B, 0xA9,
+ 0xF8, 0x22, 0x81, 0x21, 0x97, 0xFC, 0xC0, 0x8A,
+ 0x26, 0x58, 0x13, 0x29, 0xB6, 0x69, 0x94, 0x4B,
+ 0xAB, 0xB3, 0x88, 0x0D, 0xA9, 0x48, 0x0E, 0xE8,
+ 0x70, 0xFC, 0xA1, 0x21, 0xC4, 0x2C, 0xE5, 0x99,
+ 0xB4, 0xF1, 0x6F, 0xB2, 0x4B, 0x4B, 0xCD, 0x48,
+ 0x15, 0x47, 0x2D, 0x72, 0x39, 0x99, 0x9D, 0x24,
+ 0x0C, 0x8B, 0xDC, 0xA1, 0xEE, 0xF6, 0xF4, 0x73,
+ 0xC3, 0xB8, 0x0C, 0x23, 0x0D, 0xA7, 0xC4, 0x7D,
+ 0x27, 0xE2, 0x14, 0x11, 0x53, 0x19, 0xE7, 0xCA,
+ 0x94, 0x4E, 0x0D, 0x2C, 0xF7, 0x36, 0x47, 0xDB,
+ 0x77, 0x3C, 0x22, 0xAC, 0xBE, 0xE1, 0x06, 0x55,
+ 0xE5, 0xDD, 0x8B, 0x65, 0xE8, 0xE9, 0x91, 0x52,
+ 0x59, 0x97, 0xFC, 0x8C, 0xEE, 0x96, 0x22, 0x60,
+ 0xEE, 0xBF, 0x82, 0xF0, 0xCA, 0x14, 0xF9, 0xD3
+};
+
+static const struct blockcipher_test_data
+triple_des128ctr_test_vector = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_3DES_CTR,
+ .cipher_key = {
+ .data = {
+ 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
+ 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A
+ },
+ .len = 16
+ },
+ .iv = {
+ .data = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
+ },
+ .len = 8
+ },
+ .plaintext = {
+ .data = plaintext_des,
+ .len = 512
+ },
+ .ciphertext = {
+ .data = ciphertext512_des128ctr,
+ .len = 512
+ }
+};
+
+static const struct blockcipher_test_data
+triple_des128ctr_sha1_test_vector = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_3DES_CTR,
+ .cipher_key = {
+ .data = {
+ 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
+ 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A
+ },
+ .len = 16
+ },
+ .iv = {
+ .data = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
+ },
+ .len = 8
+ },
+ .plaintext = {
+ .data = plaintext_des,
+ .len = 512
+ },
+ .ciphertext = {
+ .data = ciphertext512_des128ctr,
+ .len = 512
+ },
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1,
+ .digest = {
+ .data = {
+ 0xC3, 0x40, 0xD5, 0xD9, 0x8F, 0x8A, 0xC0, 0xF0,
+ 0x46, 0x28, 0x02, 0x01, 0xB5, 0xC1, 0x87, 0x4D,
+ 0xAC, 0xFE, 0x48, 0x76
+ },
+ .len = 20
+ }
+};
+
+static const struct blockcipher_test_data
+triple_des128ctr_hmac_sha1_test_vector = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_3DES_CTR,
+ .cipher_key = {
+ .data = {
+ 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
+ 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A
+ },
+ .len = 16
+ },
+ .iv = {
+ .data = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
+ },
+ .len = 8
+ },
+ .plaintext = {
+ .data = plaintext_des,
+ .len = 512
+ },
+ .ciphertext = {
+ .data = ciphertext512_des128ctr,
+ .len = 512
+ },
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .auth_key = {
+ .data = {
+ 0xF8, 0x2A, 0xC7, 0x54, 0xDB, 0x96, 0x18, 0xAA,
+ 0xC3, 0xA1, 0x53, 0xF6, 0x1F, 0x17, 0x60, 0xBD,
+ 0xDE, 0xF4, 0xDE, 0xAD
+ },
+ .len = 20
+ },
+ .digest = {
+ .data = {
+ 0xF1, 0xC1, 0xDB, 0x4D, 0xFA, 0x7F, 0x2F, 0xE5,
+ 0xF8, 0x49, 0xEA, 0x1D, 0x7F, 0xCB, 0x42, 0x59,
+ 0xC4, 0x1E, 0xB1, 0x18
+ },
+ .len = 20
+ }
+};
+
+static const uint8_t ciphertext512_des192ctr[] = {
+ 0xFF, 0x32, 0x52, 0x97, 0x10, 0xBF, 0x0B, 0x10,
+ 0x68, 0x0F, 0x4F, 0x56, 0x8B, 0x2C, 0x7B, 0x8E,
+ 0x39, 0x1E, 0x1A, 0x2F, 0x83, 0xDE, 0x5E, 0x35,
+ 0xC8, 0x4B, 0xDF, 0xD5, 0xBC, 0x84, 0x50, 0x1A,
+ 0x02, 0xDF, 0xB3, 0x11, 0xE4, 0xDA, 0xB8, 0x0E,
+ 0x47, 0xC6, 0x0C, 0x51, 0x09, 0x62, 0x9C, 0x5D,
+ 0x71, 0x40, 0x49, 0xD8, 0x55, 0xBD, 0x7D, 0x90,
+ 0x71, 0xC5, 0xF7, 0x07, 0x6F, 0x08, 0x71, 0x2A,
+ 0xB1, 0x77, 0x9B, 0x0F, 0xA1, 0xB0, 0xD6, 0x10,
+ 0xB2, 0xE5, 0x31, 0xEC, 0x21, 0x13, 0x89, 0x2A,
+ 0x09, 0x7E, 0x30, 0xDB, 0xA0, 0xF0, 0xDC, 0xE4,
+ 0x74, 0x64, 0x39, 0xA3, 0xB0, 0xB1, 0x80, 0x66,
+ 0x52, 0xD4, 0x4E, 0xC9, 0x5A, 0x52, 0x6A, 0xC7,
+ 0xB5, 0x2B, 0x61, 0xD5, 0x17, 0xD5, 0xF3, 0xCC,
+ 0x41, 0x61, 0xD2, 0xA6, 0xF4, 0x51, 0x24, 0x3A,
+ 0x63, 0x5D, 0x23, 0xB1, 0xF0, 0x22, 0xE7, 0x45,
+ 0xFA, 0x5F, 0x7E, 0x99, 0x00, 0x11, 0x28, 0x35,
+ 0xA3, 0xF4, 0x61, 0x94, 0x0E, 0x98, 0xCE, 0x35,
+ 0xDD, 0x91, 0x1B, 0x0B, 0x4D, 0xEE, 0xFF, 0xFF,
+ 0x0B, 0xD4, 0xDC, 0x56, 0xFC, 0x71, 0xE9, 0xEC,
+ 0xE8, 0x36, 0x51, 0xF8, 0x8B, 0x6A, 0xE1, 0x8C,
+ 0x2B, 0x25, 0x91, 0x91, 0x9B, 0x92, 0x76, 0xB5,
+ 0x3D, 0x26, 0xA8, 0x53, 0xEA, 0x30, 0x5B, 0x4D,
+ 0xDA, 0x16, 0xDA, 0x7D, 0x04, 0x88, 0xF5, 0x22,
+ 0xA8, 0x0C, 0xB9, 0x41, 0xC7, 0x91, 0x64, 0x86,
+ 0x99, 0x7D, 0x18, 0xB9, 0x67, 0xA2, 0x6E, 0x05,
+ 0x1A, 0x82, 0x8F, 0xA2, 0xEB, 0x4D, 0x0B, 0x8C,
+ 0x88, 0x2D, 0xBA, 0x77, 0x87, 0x32, 0x50, 0x3C,
+ 0x4C, 0xD8, 0xD3, 0x50, 0x39, 0xFA, 0xDF, 0x48,
+ 0x3E, 0x30, 0xF5, 0x76, 0x06, 0xB0, 0x1A, 0x05,
+ 0x60, 0x2C, 0xD3, 0xA0, 0x63, 0x1A, 0x19, 0x2D,
+ 0x6B, 0x76, 0xF2, 0x31, 0x4C, 0xA7, 0xE6, 0x5C,
+ 0x1B, 0x23, 0x20, 0x41, 0x32, 0xE5, 0x83, 0x47,
+ 0x04, 0xB6, 0x3E, 0xE0, 0xFD, 0x49, 0x1E, 0x1B,
+ 0x75, 0x10, 0x11, 0x46, 0xE9, 0xF9, 0x96, 0x9A,
+ 0xD7, 0x59, 0xFE, 0x38, 0x31, 0xFE, 0x79, 0xC4,
+ 0xC8, 0x46, 0x88, 0xDE, 0x2E, 0xAE, 0x20, 0xED,
+ 0x77, 0x50, 0x40, 0x38, 0x26, 0xD3, 0x35, 0xF6,
+ 0x29, 0x55, 0x6A, 0x6B, 0x38, 0x69, 0xFE, 0x90,
+ 0x5B, 0xA7, 0xFA, 0x6B, 0x73, 0x4F, 0xB9, 0x5D,
+ 0xDC, 0x6F, 0x98, 0xC3, 0x6A, 0xC4, 0xB5, 0x09,
+ 0xC5, 0x84, 0xA5, 0x6A, 0x84, 0xA4, 0xB3, 0x8A,
+ 0x5F, 0xCA, 0x92, 0x64, 0x9E, 0xC3, 0x0F, 0x84,
+ 0x8B, 0x2D, 0x48, 0xC6, 0x67, 0xAE, 0x07, 0xE0,
+ 0x28, 0x38, 0x6D, 0xC4, 0x4D, 0x13, 0x87, 0xE0,
+ 0xB2, 0x2F, 0xAA, 0xC0, 0xCF, 0x68, 0xD7, 0x9C,
+ 0xB8, 0x07, 0xE4, 0x51, 0xD7, 0x75, 0x86, 0xFA,
+ 0x0C, 0x50, 0x74, 0x68, 0x00, 0x64, 0x2A, 0x27,
+ 0x59, 0xE9, 0x80, 0xEB, 0xC2, 0xA3, 0xFA, 0x58,
+ 0xCC, 0x03, 0xE7, 0x7B, 0x66, 0x53, 0xFF, 0x90,
+ 0xA0, 0x85, 0xE2, 0xF8, 0x82, 0xFE, 0xC6, 0x2B,
+ 0xFF, 0x5E, 0x70, 0x85, 0x34, 0xB7, 0x22, 0x38,
+ 0xDB, 0xBC, 0x15, 0x30, 0x59, 0xC1, 0x48, 0x42,
+ 0xE5, 0x38, 0x8D, 0x37, 0x59, 0xDB, 0xA3, 0x20,
+ 0x17, 0x36, 0x1D, 0x4B, 0xBF, 0x4E, 0xA4, 0x35,
+ 0xCC, 0xFE, 0xF5, 0x7A, 0x73, 0xB4, 0x6D, 0x20,
+ 0x1D, 0xC0, 0xE5, 0x21, 0x5C, 0xD2, 0x8A, 0x65,
+ 0x08, 0xB6, 0x63, 0xAC, 0x9A, 0x1E, 0x3F, 0x3C,
+ 0xAB, 0xB6, 0x6D, 0x34, 0xB2, 0x3A, 0x08, 0xDA,
+ 0x29, 0x63, 0xD1, 0xA4, 0x83, 0x52, 0xB0, 0x63,
+ 0x1B, 0x89, 0x35, 0x57, 0x59, 0x2C, 0x0F, 0x72,
+ 0x72, 0xFD, 0xA0, 0xAC, 0xDB, 0xB4, 0xA3, 0xA1,
+ 0x18, 0x10, 0x12, 0x97, 0x99, 0x63, 0x38, 0x98,
+ 0x96, 0xB5, 0x16, 0x07, 0x4E, 0xE9, 0x2C, 0x97
+};
+
+static const struct blockcipher_test_data
+triple_des192ctr_test_vector = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_3DES_CTR,
+ .cipher_key = {
+ .data = {
+ 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
+ 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A,
+ 0xD4, 0xC3, 0xA3, 0xAA, 0x33, 0x62, 0x61, 0xE0
+ },
+ .len = 24
+ },
+ .iv = {
+ .data = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
+ },
+ .len = 8
+ },
+ .plaintext = {
+ .data = plaintext_des,
+ .len = 512
+ },
+ .ciphertext = {
+ .data = ciphertext512_des192ctr,
+ .len = 512
+ }
+};
+
+static const struct blockcipher_test_data
+triple_des192ctr_sha1_test_vector = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_3DES_CTR,
+ .cipher_key = {
+ .data = {
+ 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
+ 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A,
+ 0xD4, 0xC3, 0xA3, 0xAA, 0x33, 0x62, 0x61, 0xE0
+ },
+ .len = 24
+ },
+ .iv = {
+ .data = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
+ },
+ .len = 8
+ },
+ .plaintext = {
+ .data = plaintext_des,
+ .len = 512
+ },
+ .ciphertext = {
+ .data = ciphertext512_des192ctr,
+ .len = 512
+ },
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1,
+ .digest = {
+ .data = {
+ 0xEA, 0x62, 0xB9, 0xB2, 0x78, 0x6C, 0x8E, 0xDB,
+ 0xA3, 0xB6, 0xFF, 0x23, 0x3A, 0x47, 0xD8, 0xC8,
+ 0xED, 0x5E, 0x20, 0x1D
+ },
+ .len = 20
+ }
+};
+
+static const struct blockcipher_test_data
+triple_des192ctr_hmac_sha1_test_vector = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_3DES_CTR,
+ .cipher_key = {
+ .data = {
+ 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
+ 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A,
+ 0xD4, 0xC3, 0xA3, 0xAA, 0x33, 0x62, 0x61, 0xE0
+ },
+ .len = 24
+ },
+ .iv = {
+ .data = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
+ },
+ .len = 8
+ },
+ .plaintext = {
+ .data = plaintext_des,
+ .len = 512
+ },
+ .ciphertext = {
+ .data = ciphertext512_des192ctr,
+ .len = 512
+ },
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .auth_key = {
+ .data = {
+ 0xF8, 0x2A, 0xC7, 0x54, 0xDB, 0x96, 0x18, 0xAA,
+ 0xC3, 0xA1, 0x53, 0xF6, 0x1F, 0x17, 0x60, 0xBD,
+ 0xDE, 0xF4, 0xDE, 0xAD
+ },
+ .len = 20
+ },
+ .digest = {
+ .data = {
+ 0x32, 0xD5, 0x19, 0x8F, 0x79, 0x3A, 0xAA, 0x7B,
+ 0x70, 0x67, 0x4E, 0x63, 0x88, 0xA3, 0x9A, 0x82,
+ 0x07, 0x33, 0x12, 0x94
+ },
+ .len = 20
+ }
+};
+
+static const uint8_t ciphertext512_des128cbc[] = {
+ 0x28, 0x2a, 0xff, 0x15, 0x5c, 0xdf, 0xd9, 0x6b,
+ 0x54, 0xbc, 0x7b, 0xfb, 0xc5, 0x64, 0x4d, 0xdd,
+ 0x3e, 0xf2, 0x9e, 0xb7, 0x53, 0x65, 0x37, 0x05,
+ 0xe0, 0xdf, 0xae, 0xf7, 0xc9, 0x27, 0xe4, 0xec,
+ 0x11, 0x27, 0xc2, 0x9e, 0x02, 0x4e, 0x03, 0x3b,
+ 0x33, 0xf2, 0x66, 0x08, 0x24, 0x5f, 0xab, 0xc2,
+ 0x7e, 0x21, 0x19, 0x5d, 0x51, 0xc3, 0xe2, 0x97,
+ 0x6f, 0x2e, 0xb4, 0xaa, 0x34, 0x70, 0x88, 0x78,
+ 0x4e, 0xe7, 0x3d, 0xe1, 0x9f, 0x87, 0x1c, 0x8b,
+ 0xac, 0x8d, 0xa1, 0x1a, 0xcd, 0xb0, 0xf8, 0xb6,
+ 0x24, 0x36, 0xe3, 0x8c, 0x07, 0xe7, 0xe4, 0x92,
+ 0x13, 0x86, 0x6f, 0x13, 0xec, 0x04, 0x5c, 0xe9,
+ 0xb9, 0xca, 0x45, 0x8a, 0x2c, 0x46, 0xda, 0x54,
+ 0x1d, 0xb5, 0x81, 0xb1, 0xcd, 0xf3, 0x7d, 0x11,
+ 0x6b, 0xb3, 0x0a, 0x45, 0xe5, 0x6e, 0x51, 0x3e,
+ 0x2c, 0xac, 0x7c, 0xbc, 0xa7, 0x7e, 0x22, 0x4d,
+ 0xe6, 0x02, 0xe3, 0x3f, 0x77, 0xd7, 0x73, 0x72,
+ 0x0e, 0xfb, 0x42, 0x85, 0x80, 0xdf, 0xa8, 0x91,
+ 0x60, 0x40, 0x48, 0xcd, 0x1b, 0xd9, 0xbf, 0x2f,
+ 0xf2, 0xdf, 0xd0, 0xbd, 0x3f, 0x82, 0xce, 0x15,
+ 0x9d, 0x6e, 0xc6, 0x59, 0x6f, 0x27, 0x0d, 0xf9,
+ 0x26, 0xe2, 0x11, 0x29, 0x50, 0xc3, 0x0a, 0xb7,
+ 0xde, 0x9d, 0xe9, 0x55, 0xa1, 0xe9, 0x01, 0x33,
+ 0x56, 0x51, 0xa7, 0x3a, 0x9e, 0x63, 0xc5, 0x08,
+ 0x01, 0x3b, 0x03, 0x4b, 0xc6, 0xc4, 0xa1, 0xc0,
+ 0xc0, 0xd0, 0x0e, 0x48, 0xe5, 0x4c, 0x55, 0x6b,
+ 0x4a, 0xc1, 0x0a, 0x24, 0x4b, 0xd0, 0x02, 0xf4,
+ 0x31, 0x63, 0x11, 0xbd, 0xa6, 0x1f, 0xf4, 0xae,
+ 0x23, 0x5a, 0x40, 0x7e, 0x0e, 0x4e, 0x63, 0x8b,
+ 0x66, 0x3d, 0x55, 0x46, 0x6e, 0x5c, 0x76, 0xa7,
+ 0x68, 0x31, 0xce, 0x5d, 0xca, 0xe2, 0xb4, 0xb0,
+ 0xc1, 0x1f, 0x66, 0x18, 0x75, 0x64, 0x73, 0xa9,
+ 0x9e, 0xd5, 0x0e, 0x0e, 0xf7, 0x77, 0x61, 0xf8,
+ 0x89, 0xc6, 0xcf, 0x0c, 0x41, 0xd3, 0x8f, 0xfd,
+ 0x22, 0x52, 0x4f, 0x94, 0x5c, 0x19, 0x11, 0x3a,
+ 0xb5, 0x63, 0xe8, 0x81, 0x33, 0x13, 0x54, 0x3c,
+ 0x93, 0x36, 0xb5, 0x5b, 0x51, 0xaf, 0x51, 0xa2,
+ 0x08, 0xae, 0x83, 0x15, 0x77, 0x07, 0x28, 0x0d,
+ 0x98, 0xe1, 0x2f, 0x69, 0x0e, 0xfb, 0x9a, 0x2e,
+ 0x27, 0x27, 0xb0, 0xd5, 0xce, 0xf8, 0x16, 0x55,
+ 0xfd, 0xaa, 0xd7, 0x1a, 0x1b, 0x2e, 0x4c, 0x86,
+ 0x7a, 0x6a, 0x90, 0xf7, 0x0a, 0x07, 0xd3, 0x81,
+ 0x4b, 0x75, 0x6a, 0x79, 0xdb, 0x63, 0x45, 0x0f,
+ 0x31, 0x7e, 0xd0, 0x2a, 0x14, 0xff, 0xee, 0xcc,
+ 0x97, 0x8a, 0x7d, 0x74, 0xbd, 0x9d, 0xaf, 0x00,
+ 0xdb, 0x7e, 0xf3, 0xe6, 0x22, 0x76, 0x77, 0x58,
+ 0xba, 0x1c, 0x06, 0x96, 0xfb, 0x6f, 0x41, 0x71,
+ 0x66, 0x98, 0xae, 0x31, 0x7d, 0x29, 0x18, 0x71,
+ 0x0e, 0xe4, 0x98, 0x7e, 0x59, 0x5a, 0xc9, 0x78,
+ 0x9c, 0xfb, 0x6c, 0x81, 0x44, 0xb4, 0x0f, 0x5e,
+ 0x18, 0x53, 0xb8, 0x6f, 0xbc, 0x3b, 0x15, 0xf0,
+ 0x10, 0xdd, 0x0d, 0x4b, 0x0a, 0x36, 0x0e, 0xb4,
+ 0x76, 0x0f, 0x16, 0xa7, 0x5c, 0x9d, 0xcf, 0xb0,
+ 0x6d, 0x38, 0x02, 0x07, 0x05, 0xe9, 0xe9, 0x46,
+ 0x08, 0xb8, 0x52, 0xd6, 0xd9, 0x4c, 0x81, 0x63,
+ 0x1d, 0xe2, 0x5b, 0xd0, 0xf6, 0x5e, 0x1e, 0x81,
+ 0x48, 0x08, 0x66, 0x3a, 0x85, 0xed, 0x65, 0xfe,
+ 0xe8, 0x05, 0x7a, 0xe1, 0xe6, 0x12, 0xf2, 0x52,
+ 0x83, 0xdd, 0x82, 0xbe, 0xf6, 0x34, 0x8a, 0x6f,
+ 0xc5, 0x83, 0xcd, 0x3f, 0xbe, 0x58, 0x8b, 0x11,
+ 0x78, 0xdc, 0x0c, 0x83, 0x72, 0x5d, 0x05, 0x2a,
+ 0x01, 0x29, 0xee, 0x48, 0x9a, 0x67, 0x00, 0x6e,
+ 0x14, 0x60, 0x2d, 0x00, 0x52, 0x87, 0x98, 0x5e,
+ 0x43, 0xfe, 0xf1, 0x10, 0x14, 0xf1, 0x91, 0xcc
+};
+
+static const struct blockcipher_test_data
+triple_des128cbc_test_vector = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_3DES_CBC,
+ .cipher_key = {
+ .data = {
+ 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
+ 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A
+ },
+ .len = 16
+ },
+ .iv = {
+ .data = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
+ },
+ .len = 8
+ },
+ .plaintext = {
+ .data = plaintext_des,
+ .len = 512
+ },
+ .ciphertext = {
+ .data = ciphertext512_des128cbc,
+ .len = 512
+ }
+};
+
+static const struct blockcipher_test_data
+triple_des128cbc_sha1_test_vector = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_3DES_CBC,
+ .cipher_key = {
+ .data = {
+ 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
+ 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A
+ },
+ .len = 16
+ },
+ .iv = {
+ .data = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
+ },
+ .len = 8
+ },
+ .plaintext = {
+ .data = plaintext_des,
+ .len = 512
+ },
+ .ciphertext = {
+ .data = ciphertext512_des128cbc,
+ .len = 512
+ },
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1,
+ .digest = {
+ .data = {
+ 0x94, 0x45, 0x7B, 0xDF, 0xFE, 0x80, 0xB9, 0xA6,
+ 0xA0, 0x7A, 0xE8, 0x93, 0x40, 0x7B, 0x85, 0x02,
+ 0x1C, 0xD7, 0xE8, 0x87
+ },
+ .len = 20
+ }
+};
+
+static const struct blockcipher_test_data
+triple_des128cbc_hmac_sha1_test_vector = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_3DES_CBC,
+ .cipher_key = {
+ .data = {
+ 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
+ 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A
+ },
+ .len = 16
+ },
+ .iv = {
+ .data = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
+ },
+ .len = 8
+ },
+ .plaintext = {
+ .data = plaintext_des,
+ .len = 512
+ },
+ .ciphertext = {
+ .data = ciphertext512_des128cbc,
+ .len = 512
+ },
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .auth_key = {
+ .data = {
+ 0xF8, 0x2A, 0xC7, 0x54, 0xDB, 0x96, 0x18, 0xAA,
+ 0xC3, 0xA1, 0x53, 0xF6, 0x1F, 0x17, 0x60, 0xBD,
+ 0xDE, 0xF4, 0xDE, 0xAD
+ },
+ .len = 20
+ },
+ .digest = {
+ .data = {
+ 0x7E, 0xBA, 0xFF, 0x86, 0x8D, 0x65, 0xCD, 0x08,
+ 0x76, 0x34, 0x94, 0xE9, 0x9A, 0xCD, 0xB2, 0xBB,
+ 0xBF, 0x65, 0xF5, 0x42
+ },
+ .len = 20
+ }
+};
+
+static const uint8_t ciphertext512_des192cbc[] = {
+ 0xd0, 0xc9, 0xdc, 0x51, 0x29, 0x97, 0x03, 0x64,
+ 0xcd, 0x22, 0xba, 0x3d, 0x2b, 0xbc, 0x21, 0x37,
+ 0x7b, 0x1e, 0x29, 0x23, 0xeb, 0x51, 0x6e, 0xac,
+ 0xbe, 0x5b, 0xd3, 0x67, 0xe0, 0x3f, 0xc3, 0xb5,
+ 0xe3, 0x04, 0x17, 0x42, 0x2b, 0xaa, 0xdd, 0xd6,
+ 0x0e, 0x69, 0xd0, 0x8f, 0x8a, 0xfc, 0xb4, 0x55,
+ 0x67, 0x06, 0x51, 0xbb, 0x00, 0x57, 0xee, 0x95,
+ 0x28, 0x79, 0x3f, 0xd9, 0x97, 0x2b, 0xb0, 0x02,
+ 0x35, 0x08, 0xce, 0x7a, 0xc3, 0x43, 0x2c, 0x87,
+ 0xaa, 0x97, 0x6a, 0xad, 0xf0, 0x26, 0xea, 0x1d,
+ 0xbb, 0x08, 0xe9, 0x52, 0x11, 0xd3, 0xaf, 0x36,
+ 0x17, 0x14, 0x21, 0xb2, 0xbc, 0x42, 0x51, 0x33,
+ 0x27, 0x8c, 0xd8, 0x45, 0xb9, 0x76, 0xa0, 0x11,
+ 0x24, 0x34, 0xde, 0x4d, 0x13, 0x67, 0x1b, 0xc3,
+ 0x31, 0x12, 0x66, 0x56, 0x59, 0xd2, 0xb1, 0x8f,
+ 0xec, 0x1e, 0xc0, 0x10, 0x7a, 0x86, 0xb1, 0x60,
+ 0xc3, 0x01, 0xd6, 0xa8, 0x55, 0xad, 0x58, 0x63,
+ 0xca, 0x68, 0xa9, 0x33, 0xe3, 0x93, 0x90, 0x7d,
+ 0x8f, 0xca, 0xf8, 0x1c, 0xc2, 0x9e, 0xfb, 0xde,
+ 0x9c, 0xc7, 0xf2, 0x6c, 0xff, 0xcc, 0x39, 0x17,
+ 0x49, 0x33, 0x0d, 0x7c, 0xed, 0x07, 0x99, 0x91,
+ 0x91, 0x6c, 0x5f, 0x3f, 0x02, 0x09, 0xdc, 0x70,
+ 0xf9, 0x3b, 0x8d, 0xaa, 0xf4, 0xbc, 0x0e, 0xec,
+ 0xf2, 0x26, 0xfb, 0xb2, 0x1c, 0x31, 0xae, 0xc6,
+ 0x72, 0xe8, 0x0b, 0x75, 0x05, 0x57, 0x58, 0x98,
+ 0x92, 0x37, 0x27, 0x8e, 0x3b, 0x0c, 0x25, 0xfb,
+ 0xcf, 0x82, 0x02, 0xd5, 0x0b, 0x1f, 0x89, 0x49,
+ 0xcd, 0x0f, 0xa1, 0xa7, 0x08, 0x63, 0x56, 0xa7,
+ 0x1f, 0x80, 0x3a, 0xef, 0x24, 0x89, 0x57, 0x1a,
+ 0x02, 0xdc, 0x2e, 0x51, 0xbd, 0x4a, 0x10, 0x23,
+ 0xfc, 0x02, 0x1a, 0x3f, 0x34, 0xbf, 0x1c, 0x98,
+ 0x1a, 0x40, 0x0a, 0x96, 0x8e, 0x41, 0xd5, 0x09,
+ 0x55, 0x37, 0xe9, 0x25, 0x11, 0x83, 0xf8, 0xf3,
+ 0xd4, 0xb0, 0xdb, 0x16, 0xd7, 0x51, 0x7e, 0x94,
+ 0xf7, 0xb4, 0x26, 0xe0, 0xf4, 0x80, 0x01, 0x65,
+ 0x51, 0xeb, 0xbc, 0xb0, 0x65, 0x8f, 0xdd, 0xb5,
+ 0xf7, 0x00, 0xec, 0x40, 0xab, 0x7d, 0x96, 0xcc,
+ 0x8d, 0xec, 0x89, 0x80, 0x31, 0x39, 0xa2, 0x5c,
+ 0xb0, 0x55, 0x4c, 0xee, 0xdd, 0x15, 0x2b, 0xa9,
+ 0x86, 0x4e, 0x23, 0x14, 0x36, 0xc5, 0x57, 0xf5,
+ 0xe3, 0xe8, 0x89, 0xc9, 0xb7, 0xf8, 0xeb, 0x08,
+ 0xe5, 0x93, 0x12, 0x5c, 0x0f, 0x79, 0xa1, 0x86,
+ 0xe4, 0xc2, 0xeb, 0xa6, 0xa0, 0x50, 0x6a, 0xec,
+ 0xd3, 0xce, 0x50, 0x78, 0x4e, 0x4f, 0x93, 0xd8,
+ 0xdc, 0xb4, 0xec, 0x02, 0xe9, 0xbd, 0x17, 0x99,
+ 0x1e, 0x16, 0x4e, 0xd7, 0xb0, 0x07, 0x02, 0x55,
+ 0x63, 0x24, 0x4f, 0x7b, 0x8f, 0xc5, 0x7a, 0x12,
+ 0x29, 0xff, 0x5d, 0xc1, 0xe7, 0xae, 0x48, 0xc8,
+ 0x57, 0x53, 0xe7, 0xcd, 0x10, 0x6c, 0x19, 0xfc,
+ 0xcc, 0xb9, 0xb1, 0xbe, 0x48, 0x9f, 0x2d, 0x3f,
+ 0x39, 0x2e, 0xdd, 0x71, 0xde, 0x1b, 0x54, 0xee,
+ 0x7d, 0x94, 0x8f, 0x27, 0x23, 0xe9, 0x74, 0x92,
+ 0x14, 0x93, 0x84, 0x65, 0xc9, 0x22, 0x7c, 0xa8,
+ 0x1b, 0x72, 0x73, 0xb1, 0x23, 0xa0, 0x6b, 0xcc,
+ 0xb5, 0x22, 0x06, 0x15, 0xe5, 0x96, 0x03, 0x4a,
+ 0x52, 0x8d, 0x1d, 0xbf, 0x3e, 0x82, 0x45, 0x9c,
+ 0x75, 0x9e, 0xa9, 0x3a, 0x97, 0xb6, 0x5d, 0xc4,
+ 0x75, 0x67, 0xa1, 0xf3, 0x0f, 0x7a, 0xfd, 0x71,
+ 0x58, 0x04, 0xf9, 0xa7, 0xc2, 0x56, 0x74, 0x04,
+ 0x74, 0x68, 0x6d, 0x8a, 0xf6, 0x6c, 0x5d, 0xd8,
+ 0xb5, 0xed, 0x70, 0x23, 0x32, 0x4d, 0x75, 0x92,
+ 0x88, 0x7b, 0x39, 0x37, 0x02, 0x4b, 0xb2, 0x1c,
+ 0x1f, 0x7e, 0x5b, 0x1b, 0x10, 0xfc, 0x17, 0x21,
+ 0x66, 0x62, 0x63, 0xc2, 0xcd, 0x16, 0x96, 0x3e
+};
+
+static const struct blockcipher_test_data
+triple_des192cbc_test_vector = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_3DES_CBC,
+ .cipher_key = {
+ .data = {
+ 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
+ 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A,
+ 0xD4, 0xC3, 0xA3, 0xAA, 0x33, 0x62, 0x61, 0xE0
+ },
+ .len = 24
+ },
+ .iv = {
+ .data = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
+ },
+ .len = 8
+ },
+ .plaintext = {
+ .data = plaintext_des,
+ .len = 512
+ },
+ .ciphertext = {
+ .data = ciphertext512_des192cbc,
+ .len = 512
+ }
+};
+
+static const struct blockcipher_test_data
+triple_des192cbc_sha1_test_vector = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_3DES_CBC,
+ .cipher_key = {
+ .data = {
+ 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
+ 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A,
+ 0xD4, 0xC3, 0xA3, 0xAA, 0x33, 0x62, 0x61, 0xE0
+ },
+ .len = 24
+ },
+ .iv = {
+ .data = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
+ },
+ .len = 8
+ },
+ .plaintext = {
+ .data = plaintext_des,
+ .len = 512
+ },
+ .ciphertext = {
+ .data = ciphertext512_des192cbc,
+ .len = 512
+ },
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1,
+ .digest = {
+ .data = {
+ 0x53, 0x27, 0xC0, 0xE6, 0xD6, 0x1B, 0xD6, 0x45,
+ 0x94, 0x2D, 0xCE, 0x8B, 0x29, 0xA3, 0x52, 0x14,
+ 0xC1, 0x6B, 0x87, 0x99
+ },
+ .len = 20
+ }
+};
+
+static const struct blockcipher_test_data
+triple_des192cbc_hmac_sha1_test_vector = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_3DES_CBC,
+ .cipher_key = {
+ .data = {
+ 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2,
+ 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A,
+ 0xD4, 0xC3, 0xA3, 0xAA, 0x33, 0x62, 0x61, 0xE0
+ },
+ .len = 24
+ },
+ .iv = {
+ .data = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
+ },
+ .len = 8
+ },
+ .plaintext = {
+ .data = plaintext_des,
+ .len = 512
+ },
+ .ciphertext = {
+ .data = ciphertext512_des192cbc,
+ .len = 512
+ },
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .auth_key = {
+ .data = {
+ 0xF8, 0x2A, 0xC7, 0x54, 0xDB, 0x96, 0x18, 0xAA,
+ 0xC3, 0xA1, 0x53, 0xF6, 0x1F, 0x17, 0x60, 0xBD,
+ 0xDE, 0xF4, 0xDE, 0xAD
+ },
+ .len = 20
+ },
+ .digest = {
+ .data = {
+ 0xBA, 0xAC, 0x74, 0x19, 0x43, 0xB0, 0x72, 0xB8,
+ 0x08, 0xF5, 0x24, 0xC4, 0x09, 0xBD, 0x48, 0xC1,
+ 0x3C, 0x50, 0x1C, 0xDD
+ },
+ .len = 20
+ }
+};
+
+static const struct blockcipher_test_case triple_des_chain_test_cases[] = {
+ {
+ .test_descr = "3DES-128-CBC HMAC-SHA1 Encryption Digest",
+ .test_data = &triple_des128cbc_hmac_sha1_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "3DES-128-CBC HMAC-SHA1 Decryption Digest Verify",
+ .test_data = &triple_des128cbc_hmac_sha1_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "3DES-128-CBC SHA1 Encryption Digest",
+ .test_data = &triple_des128cbc_sha1_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "3DES-128-CBC SHA1 Decryption Digest Verify",
+ .test_data = &triple_des128cbc_sha1_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "3DES-192-CBC HMAC-SHA1 Encryption Digest",
+ .test_data = &triple_des192cbc_hmac_sha1_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "3DES-192-CBC HMAC-SHA1 Decryption Digest Verify",
+ .test_data = &triple_des192cbc_hmac_sha1_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "3DES-192-CBC SHA1 Encryption Digest",
+ .test_data = &triple_des192cbc_sha1_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "3DES-192-CBC SHA1 Decryption Digest Verify",
+ .test_data = &triple_des192cbc_sha1_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "3DES-128-CTR HMAC-SHA1 Encryption Digest",
+ .test_data = &triple_des128ctr_hmac_sha1_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "3DES-128-CTR HMAC-SHA1 Decryption Digest Verify",
+ .test_data = &triple_des128ctr_hmac_sha1_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "3DES-128-CTR SHA1 Encryption Digest",
+ .test_data = &triple_des128ctr_sha1_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "3DES-128-CTR SHA1 Decryption Digest Verify",
+ .test_data = &triple_des128ctr_sha1_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "3DES-192-CTR HMAC-SHA1 Encryption Digest",
+ .test_data = &triple_des192ctr_hmac_sha1_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "3DES-192-CTR HMAC-SHA1 Decryption Digest Verify",
+ .test_data = &triple_des192ctr_hmac_sha1_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "3DES-192-CTR SHA1 Encryption Digest",
+ .test_data = &triple_des192ctr_sha1_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "3DES-192-CTR SHA1 Decryption Digest Verify",
+ .test_data = &triple_des192ctr_sha1_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "3DES-128-CBC HMAC-SHA1 Encryption Digest OOP",
+ .test_data = &triple_des128cbc_hmac_sha1_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
+ .feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "3DES-128-CBC HMAC-SHA1 Decryption Digest"
+ " Verify OOP",
+ .test_data = &triple_des128cbc_hmac_sha1_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
+ .feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "3DES-128-CBC HMAC-SHA1 Encryption Digest"
+ " Sessionless",
+ .test_data = &triple_des128cbc_hmac_sha1_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
+ .feature_mask = BLOCKCIPHER_TEST_FEATURE_SESSIONLESS,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr =
+ "3DES-128-CBC HMAC-SHA1 Decryption Digest"
+ " Verify Sessionless",
+ .test_data = &triple_des128cbc_hmac_sha1_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
+ .feature_mask = BLOCKCIPHER_TEST_FEATURE_SESSIONLESS,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+};
+
+static const struct blockcipher_test_case triple_des_cipheronly_test_cases[] = {
+ {
+ .test_descr = "3DES-128-CBC Encryption",
+ .test_data = &triple_des128cbc_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "3DES-128-CBC Decryption",
+ .test_data = &triple_des128cbc_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "3DES-192-CBC Encryption",
+ .test_data = &triple_des192cbc_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "3DES-192-CBC Decryption",
+ .test_data = &triple_des192cbc_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "3DES-128-CTR Encryption",
+ .test_data = &triple_des128ctr_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "3DES-128-CTR Decryption",
+ .test_data = &triple_des128ctr_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "3DES-192-CTR Encryption",
+ .test_data = &triple_des192ctr_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "3DES-192-CTR Decryption",
+ .test_data = &triple_des192ctr_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ }
+};
+
+#endif /* TEST_CRYPTODEV_DES_TEST_VECTORS_H_ */
diff --git a/app/test/test_cryptodev_gcm_test_vectors.h b/app/test/test_cryptodev_gcm_test_vectors.h
index deca09d..b404242 100644
--- a/app/test/test_cryptodev_gcm_test_vectors.h
+++ b/app/test/test_cryptodev_gcm_test_vectors.h
@@ -33,6 +33,8 @@
#ifndef TEST_CRYPTODEV_GCM_TEST_VECTORS_H_
#define TEST_CRYPTODEV_GCM_TEST_VECTORS_H_
+#define GMAC_LARGE_PLAINTEXT_LENGTH 65376
+
struct gcm_test_data {
struct {
uint8_t data[64];
@@ -449,7 +451,7 @@ static const struct gcm_test_data gcm_test_case_7 = {
};
/** GMAC Test Vectors */
-static uint8_t gmac_plaintext[] = {
+static uint8_t gmac_plaintext[GMAC_LARGE_PLAINTEXT_LENGTH] = {
0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, 0x10,
0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
@@ -1201,4 +1203,36 @@ static const struct cryptodev_perf_test_data AES_GCM_128_12IV_0AAD = {
},
};
+static const struct gmac_test_data gmac_test_case_4 = {
+ .key = {
+ .data = {
+ 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c,
+ 0x6d, 0x6a, 0x8f, 0x94, 0x67, 0x30, 0x83, 0x08
+ },
+ .len = 16
+ },
+ .iv = {
+ .data = {
+ 0xca, 0xfe, 0xba, 0xbe, 0xfa, 0xce, 0xdb, 0xad,
+ 0xde, 0xca, 0xf8, 0x88
+ },
+ .len = 12
+ },
+ .aad = {
+ .data = gmac_plaintext,
+ .len = GMAC_LARGE_PLAINTEXT_LENGTH
+ },
+ .plaintext = {
+ .data = NULL,
+ .len = 0
+ },
+ .gmac_tag = {
+ .data = {
+ 0x88, 0x82, 0xb4, 0x93, 0x8f, 0x04, 0xcd, 0x06,
+ 0xfd, 0xac, 0x6d, 0x8b, 0x9c, 0x9e, 0x8f, 0xec
+ },
+ .len = 16
+ }
+};
+
#endif /* TEST_CRYPTODEV_GCM_TEST_VECTORS_H_ */
diff --git a/app/test/test_cryptodev_hash_test_vectors.h b/app/test/test_cryptodev_hash_test_vectors.h
new file mode 100644
index 0000000..dfc84db
--- /dev/null
+++ b/app/test/test_cryptodev_hash_test_vectors.h
@@ -0,0 +1,491 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef TEST_CRYPTODEV_HASH_TEST_VECTORS_H_
+#define TEST_CRYPTODEV_HASH_TEST_VECTORS_H_
+
+static const uint8_t plaintext_hash[] = {
+ "What a lousy earth! He wondered how many people "
+ "were destitute that same night even in his own "
+ "prosperous country, how many homes were "
+ "shanties, how many husbands were drunk and "
+ "wives socked, and how many children were "
+ "bullied, abused, or abandoned. How many "
+ "families hungered for food they could not "
+ "afford to buy? How many hearts were broken? How "
+ "many suicides would take place that same night, "
+ "how many people would go insane? How many "
+ "cockroaches and landlords would triumph? How "
+ "many winners were losers, successes failures, "
+ "and rich men poor men? How many wise guys were "
+ "stupid? How many happy endings were unhappy "
+ "endings? How many honest men were liars, brave "
+ "men cowards, loyal men traitors, how many "
+ "sainted men were corrupt, how many people in "
+ "positions of trust had sold their souls to "
+ "bodyguards, how many had never had souls? How "
+ "many straight-and-narrow paths were crooked "
+ "paths? How many best families were worst "
+ "families and how many good people were bad "
+ "people? When you added them all up and then "
+ "subtracted, you might be left with only the "
+ "children, and perhaps with Albert Einstein and "
+ "an old violinist or sculptor somewhere."
+};
+
+static const struct blockcipher_test_data
+md5_test_vector = {
+ .auth_algo = RTE_CRYPTO_AUTH_MD5,
+ .ciphertext = {
+ .data = plaintext_hash,
+ .len = 512
+ },
+ .digest = {
+ .data = {
+ 0xB3, 0xE6, 0xBB, 0x50, 0x41, 0x35, 0x3C, 0x6B,
+ 0x7A, 0xFF, 0xD2, 0x64, 0xAF, 0xD5, 0x1C, 0xB2
+ },
+ .len = 16
+ }
+};
+
+static const struct blockcipher_test_data
+hmac_md5_test_vector = {
+ .auth_algo = RTE_CRYPTO_AUTH_MD5_HMAC,
+ .ciphertext = {
+ .data = plaintext_hash,
+ .len = 512
+ },
+ .auth_key = {
+ .data = {
+ 0xF8, 0x2A, 0xC7, 0x54, 0xDB, 0x96, 0x18, 0xAA,
+ 0xC3, 0xA1, 0x53, 0xF6, 0x1F, 0x17, 0x60, 0xBD
+ },
+ .len = 16
+ },
+ .digest = {
+ .data = {
+ 0x50, 0xE8, 0xDE, 0xC5, 0xC1, 0x76, 0xAC, 0xAE,
+ 0x15, 0x4A, 0xF1, 0x7F, 0x7E, 0x04, 0x42, 0x9B
+ },
+ .len = 16
+ }
+};
+
+static const struct blockcipher_test_data
+sha1_test_vector = {
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1,
+ .ciphertext = {
+ .data = plaintext_hash,
+ .len = 512
+ },
+ .digest = {
+ .data = {
+ 0xA2, 0x8D, 0x40, 0x78, 0xDD, 0x9F, 0xBB, 0xD5,
+ 0x35, 0x62, 0xFB, 0xFA, 0x93, 0xFD, 0x7D, 0x70,
+ 0xA6, 0x7D, 0x45, 0xCA
+ },
+ .len = 20
+ }
+};
+
+static const struct blockcipher_test_data
+hmac_sha1_test_vector = {
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .ciphertext = {
+ .data = plaintext_hash,
+ .len = 512
+ },
+ .auth_key = {
+ .data = {
+ 0xF8, 0x2A, 0xC7, 0x54, 0xDB, 0x96, 0x18, 0xAA,
+ 0xC3, 0xA1, 0x53, 0xF6, 0x1F, 0x17, 0x60, 0xBD,
+ 0xDE, 0xF4, 0xDE, 0xAD
+ },
+ .len = 20
+ },
+ .digest = {
+ .data = {
+ 0xC4, 0xB7, 0x0E, 0x6B, 0xDE, 0xD1, 0xE7, 0x77,
+ 0x7E, 0x2E, 0x8F, 0xFC, 0x48, 0x39, 0x46, 0x17,
+ 0x3F, 0x91, 0x64, 0x59
+ },
+ .len = 20
+ }
+};
+
+static const struct blockcipher_test_data
+sha224_test_vector = {
+ .auth_algo = RTE_CRYPTO_AUTH_SHA224,
+ .ciphertext = {
+ .data = plaintext_hash,
+ .len = 512
+ },
+ .digest = {
+ .data = {
+ 0x91, 0xE7, 0xCD, 0x75, 0x14, 0x9C, 0xA9, 0xE9,
+ 0x2E, 0x46, 0x12, 0x20, 0x22, 0xF9, 0x68, 0x28,
+ 0x39, 0x26, 0xDF, 0xB5, 0x78, 0x62, 0xB2, 0x6E,
+ 0x5E, 0x8F, 0x25, 0x84
+ },
+ .len = 28
+ }
+};
+
+static const struct blockcipher_test_data
+hmac_sha224_test_vector = {
+ .auth_algo = RTE_CRYPTO_AUTH_SHA224_HMAC,
+ .ciphertext = {
+ .data = plaintext_hash,
+ .len = 512
+ },
+ .auth_key = {
+ .data = {
+ 0xF8, 0x2A, 0xC7, 0x54, 0xDB, 0x96, 0x18, 0xAA,
+ 0xC3, 0xA1, 0x53, 0xF6, 0x1F, 0x17, 0x60, 0xBD,
+ 0xDE, 0xF4, 0xDE, 0xAD, 0x26, 0xEB, 0xAB, 0x92,
+ 0xFB, 0xBF, 0xB0, 0x8C
+ },
+ .len = 28
+ },
+ .digest = {
+ .data = {
+ 0x70, 0x0F, 0x04, 0x4D, 0x22, 0x02, 0x7D, 0x31,
+ 0x36, 0xDA, 0x77, 0x19, 0xB9, 0x66, 0x37, 0x7B,
+ 0xF1, 0x8A, 0x63, 0xBB, 0x5D, 0x1D, 0xE3, 0x9F,
+ 0x92, 0xF6, 0xAA, 0x19
+ },
+ .len = 28
+ }
+};
+
+static const struct blockcipher_test_data
+sha256_test_vector = {
+ .auth_algo = RTE_CRYPTO_AUTH_SHA256,
+ .ciphertext = {
+ .data = plaintext_hash,
+ .len = 512
+ },
+ .digest = {
+ .data = {
+ 0x7F, 0xF1, 0x0C, 0xF5, 0x90, 0x97, 0x19, 0x0F,
+ 0x00, 0xE4, 0x83, 0x01, 0xCA, 0x59, 0x00, 0x2E,
+ 0x1F, 0xC7, 0x84, 0xEE, 0x76, 0xA6, 0x39, 0x15,
+ 0x76, 0x2F, 0x87, 0xF9, 0x01, 0x06, 0xF3, 0xB7
+ },
+ .len = 32
+ }
+};
+
+static const struct blockcipher_test_data
+hmac_sha256_test_vector = {
+ .auth_algo = RTE_CRYPTO_AUTH_SHA256_HMAC,
+ .ciphertext = {
+ .data = plaintext_hash,
+ .len = 512
+ },
+ .auth_key = {
+ .data = {
+ 0xF8, 0x2A, 0xC7, 0x54, 0xDB, 0x96, 0x18, 0xAA,
+ 0xC3, 0xA1, 0x53, 0xF6, 0x1F, 0x17, 0x60, 0xBD,
+ 0xDE, 0xF4, 0xDE, 0xAD, 0x26, 0xEB, 0xAB, 0x92,
+ 0xFB, 0xBF, 0xB0, 0x8C, 0x29, 0x87, 0x90, 0xAC
+ },
+ .len = 32
+ },
+ .digest = {
+ .data = {
+ 0xAF, 0x8F, 0x70, 0x1B, 0x4B, 0xAF, 0x34, 0xCB,
+ 0x02, 0x24, 0x48, 0x45, 0x83, 0x52, 0x8F, 0x22,
+ 0x06, 0x4D, 0x64, 0x09, 0x0A, 0xCC, 0x02, 0x77,
+ 0x71, 0x83, 0x48, 0x71, 0x07, 0x02, 0x25, 0x17
+ },
+ .len = 32
+ }
+};
+
+static const struct blockcipher_test_data
+sha384_test_vector = {
+ .auth_algo = RTE_CRYPTO_AUTH_SHA384,
+ .ciphertext = {
+ .data = plaintext_hash,
+ .len = 512
+ },
+ .digest = {
+ .data = {
+ 0x1D, 0xE7, 0x3F, 0x55, 0x86, 0xFE, 0x48, 0x9F,
+ 0xAC, 0xC6, 0x85, 0x32, 0xFA, 0x8E, 0xA6, 0x77,
+ 0x25, 0x84, 0xA5, 0x98, 0x8D, 0x0B, 0x80, 0xF4,
+ 0xEB, 0x2C, 0xFB, 0x6C, 0xEA, 0x7B, 0xFD, 0xD5,
+ 0xAD, 0x41, 0xAB, 0x15, 0xB0, 0x03, 0x15, 0xEC,
+ 0x9E, 0x3D, 0xED, 0xCB, 0x80, 0x7B, 0xF4, 0xB6
+ },
+ .len = 48
+ }
+};
+
+static const struct blockcipher_test_data
+hmac_sha384_test_vector = {
+ .auth_algo = RTE_CRYPTO_AUTH_SHA384_HMAC,
+ .ciphertext = {
+ .data = plaintext_hash,
+ .len = 512
+ },
+ .auth_key = {
+ .data = {
+ 0xF8, 0x2A, 0xC7, 0x54, 0xDB, 0x96, 0x18, 0xAA,
+ 0xC3, 0xA1, 0x53, 0xF6, 0x1F, 0x17, 0x60, 0xBD,
+ 0xDE, 0xF4, 0xDE, 0xAD, 0x26, 0xEB, 0xAB, 0x92,
+ 0xFB, 0xBF, 0xB0, 0x8C, 0x29, 0x87, 0x90, 0xAC,
+ 0x39, 0x8B, 0x5C, 0x49, 0x68, 0x1E, 0x3A, 0x05,
+ 0xCC, 0x68, 0x5C, 0x76, 0xCB, 0x3C, 0x71, 0x89
+ },
+ .len = 48
+ },
+ .digest = {
+ .data = {
+ 0xE2, 0x83, 0x18, 0x55, 0xB5, 0x8D, 0x94, 0x9B,
+ 0x01, 0xB6, 0xE2, 0x57, 0x7A, 0x62, 0xF5, 0xF4,
+ 0xAB, 0x39, 0xF3, 0x3C, 0x28, 0xA0, 0x0F, 0xCC,
+ 0xEE, 0x1C, 0xF1, 0xF8, 0x69, 0xF1, 0x24, 0x3B,
+ 0x10, 0x90, 0x0A, 0xE3, 0xF0, 0x59, 0xDD, 0xC0,
+ 0x6F, 0xE6, 0x8C, 0x84, 0xD5, 0x03, 0xF8, 0x9E
+ },
+ .len = 48
+ }
+};
+
+static const struct blockcipher_test_data
+sha512_test_vector = {
+ .auth_algo = RTE_CRYPTO_AUTH_SHA512,
+ .ciphertext = {
+ .data = plaintext_hash,
+ .len = 512
+ },
+ .digest = {
+ .data = {
+ 0xB9, 0xBA, 0x28, 0x48, 0x3C, 0xC2, 0xD3, 0x65,
+ 0x4A, 0xD6, 0x00, 0x1D, 0xCE, 0x61, 0x64, 0x54,
+ 0x45, 0x8C, 0x64, 0x0E, 0xED, 0x0E, 0xD8, 0x1C,
+ 0x72, 0xCE, 0xD2, 0x44, 0x91, 0xC8, 0xEB, 0xC7,
+ 0x99, 0xC5, 0xCA, 0x89, 0x72, 0x64, 0x96, 0x41,
+ 0xC8, 0xEA, 0xB2, 0x4E, 0xD1, 0x21, 0x13, 0x49,
+ 0x64, 0x4E, 0x15, 0x68, 0x12, 0x67, 0x26, 0x0F,
+ 0x2C, 0x3C, 0x83, 0x25, 0x27, 0x86, 0xF0, 0xDB
+ },
+ .len = 64
+ }
+};
+
+static const struct blockcipher_test_data
+hmac_sha512_test_vector = {
+ .auth_algo = RTE_CRYPTO_AUTH_SHA512_HMAC,
+ .ciphertext = {
+ .data = plaintext_hash,
+ .len = 512
+ },
+ .auth_key = {
+ .data = {
+ 0xF8, 0x2A, 0xC7, 0x54, 0xDB, 0x96, 0x18, 0xAA,
+ 0xC3, 0xA1, 0x53, 0xF6, 0x1F, 0x17, 0x60, 0xBD,
+ 0xDE, 0xF4, 0xDE, 0xAD, 0x26, 0xEB, 0xAB, 0x92,
+ 0xFB, 0xBF, 0xB0, 0x8C, 0x29, 0x87, 0x90, 0xAC,
+ 0x39, 0x8B, 0x5C, 0x49, 0x68, 0x1E, 0x3A, 0x05,
+ 0xCC, 0x68, 0x5C, 0x76, 0xCB, 0x3C, 0x71, 0x89,
+ 0xDE, 0xAA, 0x36, 0x44, 0x98, 0x93, 0x97, 0x1E,
+ 0x6D, 0x53, 0x83, 0x87, 0xB3, 0xB7, 0x56, 0x41
+ },
+ .len = 64
+ },
+ .digest = {
+ .data = {
+ 0xB8, 0x0B, 0x35, 0x97, 0x3F, 0x24, 0x3F, 0x05,
+ 0x2A, 0x7F, 0x2F, 0xD8, 0xD7, 0x56, 0x58, 0xAD,
+ 0x6F, 0x8D, 0x1F, 0x4C, 0x30, 0xF9, 0xA8, 0x29,
+ 0x7A, 0xE0, 0x8D, 0x88, 0xF5, 0x2E, 0x94, 0xF5,
+ 0x06, 0xF7, 0x5D, 0x57, 0x32, 0xA8, 0x49, 0x29,
+ 0xEA, 0x6B, 0x6D, 0x95, 0xBD, 0x76, 0xF5, 0x79,
+ 0x97, 0x37, 0x0F, 0xBE, 0xC2, 0x45, 0xA0, 0x87,
+ 0xAF, 0x24, 0x27, 0x0C, 0x78, 0xBA, 0xBE, 0x20
+ },
+ .len = 64
+ }
+};
+
+static const struct blockcipher_test_case hash_test_cases[] = {
+ {
+ .test_descr = "MD5 Digest",
+ .test_data = &md5_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "MD5 Digest Verify",
+ .test_data = &md5_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "HMAC-MD5 Digest",
+ .test_data = &hmac_md5_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "HMAC-MD5 Digest Verify",
+ .test_data = &hmac_md5_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "SHA1 Digest",
+ .test_data = &sha1_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "SHA1 Digest Verify",
+ .test_data = &sha1_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "HMAC-SHA1 Digest",
+ .test_data = &hmac_sha1_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "HMAC-SHA1 Digest Verify",
+ .test_data = &hmac_sha1_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "SHA224 Digest",
+ .test_data = &sha224_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "SHA224 Digest Verify",
+ .test_data = &sha224_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "HMAC-SHA224 Digest",
+ .test_data = &hmac_sha224_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "HMAC-SHA224 Digest Verify",
+ .test_data = &hmac_sha224_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "SHA256 Digest",
+ .test_data = &sha256_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "SHA256 Digest Verify",
+ .test_data = &sha256_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "HMAC-SHA256 Digest",
+ .test_data = &hmac_sha256_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "HMAC-SHA256 Digest Verify",
+ .test_data = &hmac_sha256_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "SHA384 Digest",
+ .test_data = &sha384_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "SHA384 Digest Verify",
+ .test_data = &sha384_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "HMAC-SHA384 Digest",
+ .test_data = &hmac_sha384_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "HMAC-SHA384 Digest Verify",
+ .test_data = &hmac_sha384_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "SHA512 Digest",
+ .test_data = &sha512_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "SHA512 Digest Verify",
+ .test_data = &sha512_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "HMAC-SHA512 Digest",
+ .test_data = &hmac_sha512_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+ {
+ .test_descr = "HMAC-SHA512 Digest Verify",
+ .test_data = &hmac_sha512_test_vector,
+ .op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_LIBCRYPTO
+ },
+};
+
+#endif /* TEST_CRYPTODEV_HASH_TEST_VECTORS_H_ */
diff --git a/app/test/test_cryptodev_perf.c b/app/test/test_cryptodev_perf.c
index 6af0896..e8fc097 100644
--- a/app/test/test_cryptodev_perf.c
+++ b/app/test/test_cryptodev_perf.c
@@ -149,7 +149,13 @@ struct crypto_unittest_params {
static struct rte_cryptodev_sym_session *
test_perf_create_snow3g_session(uint8_t dev_id, enum chain_mode chain,
- enum rte_crypto_cipher_algorithm cipher_algo, unsigned cipher_key_len,
+ enum rte_crypto_cipher_algorithm cipher_algo,
+ unsigned int cipher_key_len,
+ enum rte_crypto_auth_algorithm auth_algo);
+static struct rte_cryptodev_sym_session *
+test_perf_create_libcrypto_session(uint8_t dev_id, enum chain_mode chain,
+ enum rte_crypto_cipher_algorithm cipher_algo,
+ unsigned int cipher_key_len,
enum rte_crypto_auth_algorithm auth_algo);
static struct rte_mbuf *
test_perf_create_pktmbuf(struct rte_mempool *mpool, unsigned buf_sz);
@@ -157,6 +163,18 @@ static inline struct rte_crypto_op *
test_perf_set_crypto_op_snow3g(struct rte_crypto_op *op, struct rte_mbuf *m,
struct rte_cryptodev_sym_session *sess, unsigned data_len,
unsigned digest_len);
+static inline struct rte_crypto_op *
+test_perf_set_crypto_op_aes(struct rte_crypto_op *op, struct rte_mbuf *m,
+ struct rte_cryptodev_sym_session *sess, unsigned int data_len,
+ unsigned int digest_len);
+static inline struct rte_crypto_op *
+test_perf_set_crypto_op_aes_gcm(struct rte_crypto_op *op, struct rte_mbuf *m,
+ struct rte_cryptodev_sym_session *sess, unsigned int data_len,
+ unsigned int digest_len);
+static inline struct rte_crypto_op *
+test_perf_set_crypto_op_3des(struct rte_crypto_op *op, struct rte_mbuf *m,
+ struct rte_cryptodev_sym_session *sess, unsigned int data_len,
+ unsigned int digest_len);
static uint32_t get_auth_digest_length(enum rte_crypto_auth_algorithm algo);
@@ -357,6 +375,28 @@ testsuite_setup(void)
}
}
+ /* Create 2 LIBCRYPTO devices if required */
+ if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_LIBCRYPTO_PMD) {
+#ifndef RTE_LIBRTE_PMD_LIBCRYPTO
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
+ nb_devs = rte_cryptodev_count_devtype(
+ RTE_CRYPTODEV_LIBCRYPTO_PMD);
+ if (nb_devs < 2) {
+ for (i = nb_devs; i < 2; i++) {
+ ret = rte_eal_vdev_init(
+ RTE_STR(CRYPTODEV_NAME_LIBCRYPTO_PMD),
+ NULL);
+
+ TEST_ASSERT(ret == 0, "Failed to create "
+ "instance %u of pmd : %s", i,
+ RTE_STR(CRYPTODEV_NAME_LIBCRYPTO_PMD));
+ }
+ }
+ }
+
#ifndef RTE_LIBRTE_PMD_QAT
if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_QAT_SYM_PMD) {
RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_QAT must be enabled "
@@ -367,7 +407,7 @@ testsuite_setup(void)
nb_devs = rte_cryptodev_count();
if (nb_devs < 1) {
- RTE_LOG(ERR, USER1, "No crypto devices found?");
+ RTE_LOG(ERR, USER1, "No crypto devices found?\n");
return TEST_FAILED;
}
@@ -2242,6 +2282,161 @@ test_perf_snow3G_vary_burst_size(void)
return 0;
}
+static int
+test_perf_libcrypto_optimise_cyclecount(struct perf_test_params *pparams)
+{
+ uint32_t num_to_submit = pparams->total_operations;
+ struct rte_crypto_op *c_ops[num_to_submit];
+ struct rte_crypto_op *proc_ops[num_to_submit];
+ uint64_t failed_polls, retries, start_cycles,
+ end_cycles, total_cycles = 0;
+ uint32_t burst_sent = 0, burst_received = 0;
+ uint32_t i, burst_size, num_sent, num_ops_received;
+
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+
+ static struct rte_cryptodev_sym_session *sess;
+
+ static struct rte_crypto_op *(*test_perf_set_crypto_op)
+ (struct rte_crypto_op *, struct rte_mbuf *,
+ struct rte_cryptodev_sym_session *,
+ unsigned int, unsigned int);
+
+ unsigned int digest_length = get_auth_digest_length(pparams->auth_algo);
+
+ if (rte_cryptodev_count() == 0) {
+ printf("\nNo crypto devices found. Is PMD build configured?\n");
+ return TEST_FAILED;
+ }
+
+ /* Create Crypto session*/
+ sess = test_perf_create_libcrypto_session(ts_params->dev_id,
+ pparams->chain, pparams->cipher_algo,
+ pparams->cipher_key_length, pparams->auth_algo);
+ TEST_ASSERT_NOT_NULL(sess, "Session creation failed");
+
+ /* Generate Crypto op data structure(s)*/
+ for (i = 0; i < num_to_submit ; i++) {
+ struct rte_mbuf *m = test_perf_create_pktmbuf(
+ ts_params->mbuf_mp,
+ pparams->buf_size);
+ TEST_ASSERT_NOT_NULL(m, "Failed to allocate tx_buf");
+
+ struct rte_crypto_op *op =
+ rte_crypto_op_alloc(ts_params->op_mpool,
+ RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+ TEST_ASSERT_NOT_NULL(op, "Failed to allocate op");
+
+ switch (pparams->cipher_algo) {
+ case RTE_CRYPTO_CIPHER_3DES_CBC:
+ case RTE_CRYPTO_CIPHER_3DES_CTR:
+ test_perf_set_crypto_op = test_perf_set_crypto_op_3des;
+ break;
+ case RTE_CRYPTO_CIPHER_AES_CBC:
+ case RTE_CRYPTO_CIPHER_AES_CTR:
+ test_perf_set_crypto_op = test_perf_set_crypto_op_aes;
+ break;
+ case RTE_CRYPTO_CIPHER_AES_GCM:
+ test_perf_set_crypto_op =
+ test_perf_set_crypto_op_aes_gcm;
+ break;
+ default:
+ return TEST_FAILED;
+ }
+
+ op = test_perf_set_crypto_op(op, m, sess, pparams->buf_size,
+ digest_length);
+ TEST_ASSERT_NOT_NULL(op, "Failed to attach op to session");
+
+ c_ops[i] = op;
+ }
+
+ printf("\nOn %s dev%u qp%u, %s, cipher algo:%s, cipher key length:%u, "
+ "auth_algo:%s, Packet Size %u bytes",
+ pmd_name(gbl_cryptodev_perftest_devtype),
+ ts_params->dev_id, 0,
+ chain_mode_name(pparams->chain),
+ cipher_algo_name(pparams->cipher_algo),
+ pparams->cipher_key_length,
+ auth_algo_name(pparams->auth_algo),
+ pparams->buf_size);
+ printf("\nOps Tx\tOps Rx\tOps/burst ");
+ printf("Retries EmptyPolls\tIACycles/CyOp\tIACycles/Burst\t"
+ "IACycles/Byte");
+
+ for (i = 2; i <= 128 ; i *= 2) {
+ num_sent = 0;
+ num_ops_received = 0;
+ retries = 0;
+ failed_polls = 0;
+ burst_size = i;
+ total_cycles = 0;
+ while (num_sent < num_to_submit) {
+ start_cycles = rte_rdtsc_precise();
+ burst_sent = rte_cryptodev_enqueue_burst(
+ ts_params->dev_id,
+ 0, &c_ops[num_sent],
+ ((num_to_submit - num_sent) <
+ burst_size) ?
+ num_to_submit - num_sent : burst_size);
+ end_cycles = rte_rdtsc_precise();
+ if (burst_sent == 0)
+ retries++;
+ num_sent += burst_sent;
+ total_cycles += (end_cycles - start_cycles);
+
+ /* Wait until requests have been sent. */
+ rte_delay_ms(1);
+
+ start_cycles = rte_rdtsc_precise();
+ burst_received = rte_cryptodev_dequeue_burst(
+ ts_params->dev_id, 0, proc_ops,
+ burst_size);
+ end_cycles = rte_rdtsc_precise();
+ if (burst_received < burst_sent)
+ failed_polls++;
+ num_ops_received += burst_received;
+
+ total_cycles += end_cycles - start_cycles;
+ }
+
+ while (num_ops_received != num_to_submit) {
+ /* Sending 0 length burst to flush sw crypto device */
+ rte_cryptodev_enqueue_burst(ts_params->dev_id, 0,
+ NULL, 0);
+
+ start_cycles = rte_rdtsc_precise();
+ burst_received = rte_cryptodev_dequeue_burst(
+ ts_params->dev_id, 0, proc_ops,
+ burst_size);
+ end_cycles = rte_rdtsc_precise();
+
+ total_cycles += end_cycles - start_cycles;
+ if (burst_received == 0)
+ failed_polls++;
+ num_ops_received += burst_received;
+ }
+
+ printf("\n%u\t%u\t%u", num_sent, num_ops_received, burst_size);
+ printf("\t\t%"PRIu64, retries);
+ printf("\t%"PRIu64, failed_polls);
+ printf("\t\t%"PRIu64, total_cycles/num_ops_received);
+ printf("\t\t%"PRIu64, (total_cycles/num_ops_received) *
+ burst_size);
+ printf("\t\t%"PRIu64,
+ total_cycles /
+ (num_ops_received * pparams->buf_size));
+ }
+ printf("\n");
+
+ for (i = 0; i < num_to_submit ; i++) {
+ rte_pktmbuf_free(c_ops[i]->sym->m_src);
+ rte_crypto_op_free(c_ops[i]);
+ }
+
+ return TEST_SUCCESS;
+}
+
static uint32_t get_auth_key_max_length(enum rte_crypto_auth_algorithm algo)
{
switch (algo) {
@@ -2257,6 +2452,8 @@ static uint32_t get_auth_key_max_length(enum rte_crypto_auth_algorithm algo)
return 128;
case RTE_CRYPTO_AUTH_SHA512_HMAC:
return 128;
+ case RTE_CRYPTO_AUTH_AES_GCM:
+ return 0;
default:
return 0;
}
@@ -2277,23 +2474,35 @@ static uint32_t get_auth_digest_length(enum rte_crypto_auth_algorithm algo)
return TRUNCATED_DIGEST_BYTE_LENGTH_SHA384;
case RTE_CRYPTO_AUTH_SHA512_HMAC:
return TRUNCATED_DIGEST_BYTE_LENGTH_SHA512;
+ case RTE_CRYPTO_AUTH_AES_GCM:
+ return DIGEST_BYTE_LENGTH_AES_GCM;
default:
return 0;
}
}
-static uint8_t aes_cbc_key[] = {
+static uint8_t aes_key[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
-static uint8_t aes_cbc_iv[] = {
+static uint8_t aes_iv[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
+static uint8_t triple_des_key[] = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+static uint8_t triple_des_iv[] = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
static uint8_t hmac_sha_key[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
@@ -2343,7 +2552,7 @@ test_perf_create_aes_sha_session(uint8_t dev_id, enum chain_mode chain,
cipher_xform.cipher.algo = cipher_algo;
cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
- cipher_xform.cipher.key.data = aes_cbc_key;
+ cipher_xform.cipher.key.data = aes_key;
cipher_xform.cipher.key.length = cipher_key_len;
/* Setup HMAC Parameters */
@@ -2421,8 +2630,77 @@ test_perf_create_snow3g_session(uint8_t dev_id, enum chain_mode chain,
}
}
-#define AES_CBC_BLOCK_SIZE 16
-#define AES_CBC_CIPHER_IV_LENGTH 16
+static struct rte_cryptodev_sym_session *
+test_perf_create_libcrypto_session(uint8_t dev_id, enum chain_mode chain,
+ enum rte_crypto_cipher_algorithm cipher_algo,
+ unsigned int cipher_key_len,
+ enum rte_crypto_auth_algorithm auth_algo)
+{
+ struct rte_crypto_sym_xform cipher_xform = { 0 };
+ struct rte_crypto_sym_xform auth_xform = { 0 };
+
+ /* Setup Cipher Parameters */
+ cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+ cipher_xform.cipher.algo = cipher_algo;
+ cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
+
+ switch (cipher_algo) {
+ case RTE_CRYPTO_CIPHER_3DES_CBC:
+ case RTE_CRYPTO_CIPHER_3DES_CTR:
+ cipher_xform.cipher.key.data = triple_des_key;
+ break;
+ case RTE_CRYPTO_CIPHER_AES_CBC:
+ case RTE_CRYPTO_CIPHER_AES_CTR:
+ case RTE_CRYPTO_CIPHER_AES_GCM:
+ cipher_xform.cipher.key.data = aes_key;
+ break;
+ default:
+ return NULL;
+ }
+
+ cipher_xform.cipher.key.length = cipher_key_len;
+
+ /* Setup Auth Parameters */
+ auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+ auth_xform.auth.op = RTE_CRYPTO_AUTH_OP_GENERATE;
+ auth_xform.auth.algo = auth_algo;
+
+ switch (auth_algo) {
+ case RTE_CRYPTO_AUTH_SHA1_HMAC:
+ auth_xform.auth.key.data = hmac_sha_key;
+ break;
+ case RTE_CRYPTO_AUTH_AES_GCM:
+ auth_xform.auth.key.data = NULL;
+ break;
+ default:
+ return NULL;
+ }
+
+ auth_xform.auth.key.length = get_auth_key_max_length(auth_algo);
+ auth_xform.auth.digest_length = get_auth_digest_length(auth_algo);
+
+ switch (chain) {
+ case CIPHER_HASH:
+ cipher_xform.next = &auth_xform;
+ auth_xform.next = NULL;
+ /* Create Crypto session*/
+ return rte_cryptodev_sym_session_create(dev_id, &cipher_xform);
+ case HASH_CIPHER:
+ auth_xform.next = &cipher_xform;
+ cipher_xform.next = NULL;
+ /* Create Crypto session*/
+ return rte_cryptodev_sym_session_create(dev_id, &auth_xform);
+ default:
+ return NULL;
+ }
+}
+
+#define AES_BLOCK_SIZE 16
+#define AES_CIPHER_IV_LENGTH 16
+
+#define TRIPLE_DES_BLOCK_SIZE 8
+#define TRIPLE_DES_CIPHER_IV_LENGTH 8
+
#define SNOW3G_CIPHER_IV_LENGTH 16
static struct rte_mbuf *
@@ -2441,7 +2719,7 @@ test_perf_create_pktmbuf(struct rte_mempool *mpool, unsigned buf_sz)
}
static inline struct rte_crypto_op *
-test_perf_set_crypto_op(struct rte_crypto_op *op, struct rte_mbuf *m,
+test_perf_set_crypto_op_aes(struct rte_crypto_op *op, struct rte_mbuf *m,
struct rte_cryptodev_sym_session *sess, unsigned data_len,
unsigned digest_len)
{
@@ -2455,19 +2733,54 @@ test_perf_set_crypto_op(struct rte_crypto_op *op, struct rte_mbuf *m,
(m->data_off + data_len);
op->sym->auth.digest.phys_addr = rte_pktmbuf_mtophys_offset(m, data_len);
op->sym->auth.digest.length = digest_len;
- op->sym->auth.aad.data = aes_cbc_iv;
- op->sym->auth.aad.length = AES_CBC_CIPHER_IV_LENGTH;
+ op->sym->auth.aad.data = aes_iv;
+ op->sym->auth.aad.length = AES_CIPHER_IV_LENGTH;
/* Cipher Parameters */
- op->sym->cipher.iv.data = aes_cbc_iv;
- op->sym->cipher.iv.length = AES_CBC_CIPHER_IV_LENGTH;
+ op->sym->cipher.iv.data = aes_iv;
+ op->sym->cipher.iv.length = AES_CIPHER_IV_LENGTH;
/* Data lengths/offsets Parameters */
op->sym->auth.data.offset = 0;
op->sym->auth.data.length = data_len;
- op->sym->cipher.data.offset = AES_CBC_BLOCK_SIZE;
- op->sym->cipher.data.length = data_len - AES_CBC_BLOCK_SIZE;
+ op->sym->cipher.data.offset = AES_BLOCK_SIZE;
+ op->sym->cipher.data.length = data_len - AES_BLOCK_SIZE;
+
+ op->sym->m_src = m;
+
+ return op;
+}
+
+static inline struct rte_crypto_op *
+test_perf_set_crypto_op_aes_gcm(struct rte_crypto_op *op, struct rte_mbuf *m,
+ struct rte_cryptodev_sym_session *sess, unsigned int data_len,
+ unsigned int digest_len)
+{
+ if (rte_crypto_op_attach_sym_session(op, sess) != 0) {
+ rte_crypto_op_free(op);
+ return NULL;
+ }
+
+ /* Authentication Parameters */
+ op->sym->auth.digest.data = (uint8_t *)m->buf_addr +
+ (m->data_off + data_len);
+ op->sym->auth.digest.phys_addr =
+ rte_pktmbuf_mtophys_offset(m, data_len);
+ op->sym->auth.digest.length = digest_len;
+ op->sym->auth.aad.data = aes_iv;
+ op->sym->auth.aad.length = AES_CIPHER_IV_LENGTH;
+
+ /* Cipher Parameters */
+ op->sym->cipher.iv.data = aes_iv;
+ op->sym->cipher.iv.length = AES_CIPHER_IV_LENGTH;
+
+ /* Data lengths/offsets Parameters */
+ op->sym->auth.data.offset = AES_BLOCK_SIZE;
+ op->sym->auth.data.length = data_len - AES_BLOCK_SIZE;
+
+ op->sym->cipher.data.offset = AES_BLOCK_SIZE;
+ op->sym->cipher.data.length = data_len - AES_BLOCK_SIZE;
op->sym->m_src = m;
@@ -2487,7 +2800,8 @@ test_perf_set_crypto_op_snow3g(struct rte_crypto_op *op, struct rte_mbuf *m,
/* Authentication Parameters */
op->sym->auth.digest.data = (uint8_t *)m->buf_addr +
(m->data_off + data_len);
- op->sym->auth.digest.phys_addr = rte_pktmbuf_mtophys_offset(m, data_len);
+ op->sym->auth.digest.phys_addr =
+ rte_pktmbuf_mtophys_offset(m, data_len);
op->sym->auth.digest.length = digest_len;
op->sym->auth.aad.data = snow3g_iv;
op->sym->auth.aad.length = SNOW3G_CIPHER_IV_LENGTH;
@@ -2508,7 +2822,40 @@ test_perf_set_crypto_op_snow3g(struct rte_crypto_op *op, struct rte_mbuf *m,
return op;
}
+static inline struct rte_crypto_op *
+test_perf_set_crypto_op_3des(struct rte_crypto_op *op, struct rte_mbuf *m,
+ struct rte_cryptodev_sym_session *sess, unsigned int data_len,
+ unsigned int digest_len)
+{
+ if (rte_crypto_op_attach_sym_session(op, sess) != 0) {
+ rte_crypto_op_free(op);
+ return NULL;
+ }
+
+ /* Authentication Parameters */
+ op->sym->auth.digest.data = (uint8_t *)m->buf_addr +
+ (m->data_off + data_len);
+ op->sym->auth.digest.phys_addr =
+ rte_pktmbuf_mtophys_offset(m, data_len);
+ op->sym->auth.digest.length = digest_len;
+ op->sym->auth.aad.data = triple_des_iv;
+ op->sym->auth.aad.length = TRIPLE_DES_CIPHER_IV_LENGTH;
+
+ /* Cipher Parameters */
+ op->sym->cipher.iv.data = triple_des_iv;
+ op->sym->cipher.iv.length = TRIPLE_DES_CIPHER_IV_LENGTH;
+
+ /* Data lengths/offsets Parameters */
+ op->sym->auth.data.offset = 0;
+ op->sym->auth.data.length = data_len;
+
+ op->sym->cipher.data.offset = TRIPLE_DES_BLOCK_SIZE;
+ op->sym->cipher.data.length = data_len - TRIPLE_DES_BLOCK_SIZE;
+
+ op->sym->m_src = m;
+ return op;
+}
/* An mbuf set is used in each burst. An mbuf can be used by multiple bursts at
* same time, i.e. as they're not dereferenced there's no need to wait until
@@ -2579,7 +2926,7 @@ test_perf_aes_sha(uint8_t dev_id, uint16_t queue_id,
"and free ops below.");
} else {
for (i = 0; i < ops_needed; i++)
- ops[i] = test_perf_set_crypto_op(ops[i],
+ ops[i] = test_perf_set_crypto_op_aes(ops[i],
mbufs[i + (pparams->burst_size *
(j % NUM_MBUF_SETS))],
sess, pparams->buf_size, digest_length);
@@ -2790,6 +3137,155 @@ test_perf_snow3g(uint8_t dev_id, uint16_t queue_id,
return TEST_SUCCESS;
}
+static int
+test_perf_libcrypto(uint8_t dev_id, uint16_t queue_id,
+ struct perf_test_params *pparams)
+{
+ uint16_t i, k, l, m;
+ uint16_t j = 0;
+ uint16_t ops_unused = 0;
+
+ uint64_t burst_enqueued = 0, total_enqueued = 0, burst_dequeued = 0;
+ uint64_t processed = 0, failed_polls = 0, retries = 0;
+ uint64_t tsc_start = 0, tsc_end = 0;
+
+ unsigned int digest_length = get_auth_digest_length(pparams->auth_algo);
+
+ struct rte_crypto_op *ops[pparams->burst_size];
+ struct rte_crypto_op *proc_ops[pparams->burst_size];
+
+ struct rte_mbuf *mbufs[pparams->burst_size * NUM_MBUF_SETS];
+
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+
+ static struct rte_cryptodev_sym_session *sess;
+
+ static struct rte_crypto_op *(*test_perf_set_crypto_op)
+ (struct rte_crypto_op *, struct rte_mbuf *,
+ struct rte_cryptodev_sym_session *,
+ unsigned int, unsigned int);
+
+ switch (pparams->cipher_algo) {
+ case RTE_CRYPTO_CIPHER_3DES_CBC:
+ case RTE_CRYPTO_CIPHER_3DES_CTR:
+ test_perf_set_crypto_op = test_perf_set_crypto_op_3des;
+ break;
+ case RTE_CRYPTO_CIPHER_AES_CBC:
+ case RTE_CRYPTO_CIPHER_AES_CTR:
+ test_perf_set_crypto_op = test_perf_set_crypto_op_aes;
+ break;
+ case RTE_CRYPTO_CIPHER_AES_GCM:
+ test_perf_set_crypto_op = test_perf_set_crypto_op_aes_gcm;
+ break;
+ default:
+ return TEST_FAILED;
+ }
+
+ if (rte_cryptodev_count() == 0) {
+ printf("\nNo crypto devices found. Is PMD build configured?\n");
+ return TEST_FAILED;
+ }
+
+ /* Create Crypto session*/
+ sess = test_perf_create_libcrypto_session(ts_params->dev_id,
+ pparams->chain, pparams->cipher_algo,
+ pparams->cipher_key_length, pparams->auth_algo);
+ TEST_ASSERT_NOT_NULL(sess, "Session creation failed");
+
+ /* Generate a burst of crypto operations */
+ for (i = 0; i < (pparams->burst_size * NUM_MBUF_SETS); i++) {
+ mbufs[i] = test_perf_create_pktmbuf(
+ ts_params->mbuf_mp,
+ pparams->buf_size);
+
+ if (mbufs[i] == NULL) {
+ printf("\nFailed to get mbuf - freeing the rest.\n");
+ for (k = 0; k < i; k++)
+ rte_pktmbuf_free(mbufs[k]);
+ return -1;
+ }
+ }
+
+ tsc_start = rte_rdtsc_precise();
+
+ while (total_enqueued < pparams->total_operations) {
+ uint16_t burst_size =
+ total_enqueued + pparams->burst_size <=
+ pparams->total_operations ? pparams->burst_size :
+ pparams->total_operations - total_enqueued;
+ uint16_t ops_needed = burst_size - ops_unused;
+
+ if (ops_needed != rte_crypto_op_bulk_alloc(ts_params->op_mpool,
+ RTE_CRYPTO_OP_TYPE_SYMMETRIC, ops, ops_needed)){
+ printf("\nFailed to alloc enough ops, finish dequeuing "
+ "and free ops below.");
+ } else {
+ for (i = 0; i < ops_needed; i++)
+ ops[i] = test_perf_set_crypto_op(ops[i],
+ mbufs[i + (pparams->burst_size *
+ (j % NUM_MBUF_SETS))],
+ sess, pparams->buf_size, digest_length);
+
+ /* enqueue burst */
+ burst_enqueued = rte_cryptodev_enqueue_burst(dev_id,
+ queue_id, ops, burst_size);
+
+ if (burst_enqueued < burst_size)
+ retries++;
+
+ ops_unused = burst_size - burst_enqueued;
+ total_enqueued += burst_enqueued;
+ }
+
+ /* dequeue burst */
+ burst_dequeued = rte_cryptodev_dequeue_burst(dev_id, queue_id,
+ proc_ops, pparams->burst_size);
+ if (burst_dequeued == 0)
+ failed_polls++;
+ else {
+ processed += burst_dequeued;
+
+ for (l = 0; l < burst_dequeued; l++)
+ rte_crypto_op_free(proc_ops[l]);
+ }
+ j++;
+ }
+
+ /* Dequeue any operations still in the crypto device */
+ while (processed < pparams->total_operations) {
+ /* Sending 0 length burst to flush sw crypto device */
+ rte_cryptodev_enqueue_burst(dev_id, queue_id, NULL, 0);
+
+ /* dequeue burst */
+ burst_dequeued = rte_cryptodev_dequeue_burst(dev_id, queue_id,
+ proc_ops, pparams->burst_size);
+ if (burst_dequeued == 0)
+ failed_polls++;
+ else {
+ processed += burst_dequeued;
+
+ for (m = 0; m < burst_dequeued; m++)
+ rte_crypto_op_free(proc_ops[m]);
+ }
+ }
+
+ tsc_end = rte_rdtsc_precise();
+
+ double ops_s = ((double)processed / (tsc_end - tsc_start))
+ * rte_get_tsc_hz();
+ double throughput = (ops_s * pparams->buf_size * NUM_MBUF_SETS)
+ / 1000000000;
+
+ printf("\t%u\t%6.2f\t%10.2f\t%8"PRIu64"\t%8"PRIu64, pparams->buf_size,
+ ops_s / 1000000, throughput, retries, failed_polls);
+
+ for (i = 0; i < pparams->burst_size * NUM_MBUF_SETS; i++)
+ rte_pktmbuf_free(mbufs[i]);
+
+ printf("\n");
+ return TEST_SUCCESS;
+}
+
/*
perf_test_aes_sha("avx2", HASH_CIPHER, 16, CBC, SHA1);
@@ -2937,6 +3433,167 @@ test_perf_snow3G_vary_pkt_size(void)
}
static int
+test_perf_libcrypto_vary_pkt_size(void)
+{
+ unsigned int total_operations = 1000000;
+ unsigned int burst_size = { 64 };
+ unsigned int buf_lengths[] = { 64, 128, 256, 512, 768, 1024, 1280, 1536,
+ 1792, 2048 };
+ uint8_t i, j;
+
+ struct perf_test_params params_set[] = {
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_3DES_CBC,
+ .cipher_key_length = 16,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_3DES_CBC,
+ .cipher_key_length = 24,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CTR,
+ .cipher_key_length = 16,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CTR,
+ .cipher_key_length = 32,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_3DES_CTR,
+ .cipher_key_length = 16,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_3DES_CTR,
+ .cipher_key_length = 24,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_GCM,
+ .cipher_key_length = 16,
+ .auth_algo = RTE_CRYPTO_AUTH_AES_GCM
+ },
+ };
+
+ for (i = 0; i < RTE_DIM(params_set); i++) {
+ params_set[i].total_operations = total_operations;
+ params_set[i].burst_size = burst_size;
+ printf("\n%s. cipher algo: %s auth algo: %s cipher key size=%u."
+ " burst_size: %d ops\n",
+ chain_mode_name(params_set[i].chain),
+ cipher_algo_name(params_set[i].cipher_algo),
+ auth_algo_name(params_set[i].auth_algo),
+ params_set[i].cipher_key_length,
+ burst_size);
+ printf("\nBuffer Size(B)\tOPS(M)\tThroughput(Gbps)\tRetries\t"
+ "EmptyPolls\n");
+ for (j = 0; j < RTE_DIM(buf_lengths); j++) {
+ params_set[i].buf_size = buf_lengths[j];
+ test_perf_libcrypto(testsuite_params.dev_id, 0,
+ ¶ms_set[i]);
+ }
+ }
+
+ return 0;
+}
+
+static int
+test_perf_libcrypto_vary_burst_size(void)
+{
+ unsigned int total_operations = 4096;
+ uint16_t buf_lengths[] = { 40 };
+ uint8_t i, j;
+
+ struct perf_test_params params_set[] = {
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_3DES_CBC,
+ .cipher_key_length = 16,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_3DES_CBC,
+ .cipher_key_length = 24,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CTR,
+ .cipher_key_length = 16,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CTR,
+ .cipher_key_length = 32,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_3DES_CTR,
+ .cipher_key_length = 16,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_3DES_CTR,
+ .cipher_key_length = 24,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+ },
+ {
+ .chain = CIPHER_HASH,
+
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_GCM,
+ .cipher_key_length = 16,
+ .auth_algo = RTE_CRYPTO_AUTH_AES_GCM
+ },
+ };
+
+ printf("\n\nStart %s.", __func__);
+ printf("\nThis Test measures the average IA cycle cost using a "
+ "constant request(packet) size. ");
+ printf("Cycle cost is only valid when indicators show device is not"
+ " busy, i.e. Retries and EmptyPolls = 0");
+
+ for (i = 0; i < RTE_DIM(params_set); i++) {
+ printf("\n");
+ params_set[i].total_operations = total_operations;
+
+ for (j = 0; j < RTE_DIM(buf_lengths); j++) {
+ params_set[i].buf_size = buf_lengths[j];
+ test_perf_libcrypto_optimise_cyclecount(¶ms_set[i]);
+ }
+ }
+
+ return 0;
+}
+
+static int
test_perf_aes_cbc_vary_burst_size(void)
{
return test_perf_crypto_qp_vary_burst_size(testsuite_params.dev_id);
@@ -3377,6 +4034,19 @@ static struct unit_test_suite cryptodev_snow3g_testsuite = {
}
};
+static struct unit_test_suite cryptodev_libcrypto_testsuite = {
+ .suite_name = "Crypto Device LIBCRYPTO Unit Test Suite",
+ .setup = testsuite_setup,
+ .teardown = testsuite_teardown,
+ .unit_test_cases = {
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_perf_libcrypto_vary_pkt_size),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_perf_libcrypto_vary_burst_size),
+ TEST_CASES_END() /**< NULL terminate unit test array */
+ }
+};
+
static int
perftest_aesni_gcm_cryptodev(void)
{
@@ -3417,8 +4087,18 @@ perftest_qat_snow3g_cryptodev(void /*argv __rte_unused, int argc __rte_unused*/)
return unit_test_suite_runner(&cryptodev_snow3g_testsuite);
}
+static int
+perftest_libcrypto_cryptodev(void /*argv __rte_unused, int argc __rte_unused*/)
+{
+ gbl_cryptodev_perftest_devtype = RTE_CRYPTODEV_LIBCRYPTO_PMD;
+
+ return unit_test_suite_runner(&cryptodev_libcrypto_testsuite);
+}
+
REGISTER_TEST_COMMAND(cryptodev_aesni_mb_perftest, perftest_aesni_mb_cryptodev);
REGISTER_TEST_COMMAND(cryptodev_qat_perftest, perftest_qat_cryptodev);
REGISTER_TEST_COMMAND(cryptodev_sw_snow3g_perftest, perftest_sw_snow3g_cryptodev);
REGISTER_TEST_COMMAND(cryptodev_qat_snow3g_perftest, perftest_qat_snow3g_cryptodev);
REGISTER_TEST_COMMAND(cryptodev_aesni_gcm_perftest, perftest_aesni_gcm_cryptodev);
+REGISTER_TEST_COMMAND(cryptodev_libcrypto_perftest,
+ perftest_libcrypto_cryptodev);
--
2.5.0
^ permalink raw reply related
* [PATCH v6 4/4] examples/l2fwd-crypto: updated example for libcrypto PMD
From: Slawomir Mrozowicz @ 2016-10-04 15:11 UTC (permalink / raw)
To: dev; +Cc: Slawomir Mrozowicz, Daniel Mrzyglod
In-Reply-To: <1475593882-32364-1-git-send-email-slawomirx.mrozowicz@intel.com>
Libcrypto PMD has support for:
Supported cipher algorithms:
RTE_CRYPTO_CIPHER_3DES_CBC
RTE_CRYPTO_CIPHER_AES_CBC
RTE_CRYPTO_CIPHER_AES_CTR
RTE_CRYPTO_CIPHER_3DES_CTR
RTE_CRYPTO_CIPHER_AES_GCM
Supported authentication algorithms:
RTE_CRYPTO_AUTH_AES_GMAC
RTE_CRYPTO_AUTH_MD5
RTE_CRYPTO_AUTH_SHA1
RTE_CRYPTO_AUTH_SHA224
RTE_CRYPTO_AUTH_SHA256
RTE_CRYPTO_AUTH_SHA384
RTE_CRYPTO_AUTH_SHA512
RTE_CRYPTO_AUTH_MD5_HMAC
RTE_CRYPTO_AUTH_SHA1_HMAC
RTE_CRYPTO_AUTH_SHA224_HMAC
RTE_CRYPTO_AUTH_SHA256_HMAC
RTE_CRYPTO_AUTH_SHA384_HMAC
RTE_CRYPTO_AUTH_SHA512_HMAC
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
---
v3:
- change description
---
examples/l2fwd-crypto/main.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/examples/l2fwd-crypto/main.c b/examples/l2fwd-crypto/main.c
index 0593734..dae45f5 100644
--- a/examples/l2fwd-crypto/main.c
+++ b/examples/l2fwd-crypto/main.c
@@ -340,15 +340,22 @@ fill_supported_algorithm_tables(void)
strcpy(supported_auth_algo[i], "NOT_SUPPORTED");
strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_AES_GCM], "AES_GCM");
+ strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_AES_GMAC], "AES_GMAC");
strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_MD5_HMAC], "MD5_HMAC");
+ strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_MD5], "MD5");
strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_NULL], "NULL");
strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_AES_XCBC_MAC],
"AES_XCBC_MAC");
strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_SHA1_HMAC], "SHA1_HMAC");
+ strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_SHA1], "SHA1");
strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_SHA224_HMAC], "SHA224_HMAC");
+ strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_SHA224], "SHA224");
strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_SHA256_HMAC], "SHA256_HMAC");
+ strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_SHA256], "SHA256");
strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_SHA384_HMAC], "SHA384_HMAC");
+ strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_SHA384], "SHA384");
strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_SHA512_HMAC], "SHA512_HMAC");
+ strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_SHA512], "SHA512");
strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_SNOW3G_UIA2], "SNOW3G_UIA2");
strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_ZUC_EIA3], "ZUC_EIA3");
strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_KASUMI_F9], "KASUMI_F9");
@@ -363,6 +370,8 @@ fill_supported_algorithm_tables(void)
strcpy(supported_cipher_algo[RTE_CRYPTO_CIPHER_SNOW3G_UEA2], "SNOW3G_UEA2");
strcpy(supported_cipher_algo[RTE_CRYPTO_CIPHER_ZUC_EEA3], "ZUC_EEA3");
strcpy(supported_cipher_algo[RTE_CRYPTO_CIPHER_KASUMI_F8], "KASUMI_F8");
+ strcpy(supported_cipher_algo[RTE_CRYPTO_CIPHER_3DES_CTR], "3DES_CTR");
+ strcpy(supported_cipher_algo[RTE_CRYPTO_CIPHER_3DES_CBC], "3DES_CBC");
}
--
2.5.0
^ permalink raw reply related
* Re: [PATCH] ethdev: support PCI domains
From: Sinan Kaya @ 2016-10-04 13:59 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev, Stephen Hemminger
In-Reply-To: <3354300.QnNDgIpU56@xps13>
On 10/4/2016 4:15 AM, Thomas Monjalon wrote:
> 2016-07-22 18:56, Sinan Kaya:
>> On 7/22/2016 5:12 PM, Stephen Hemminger wrote:
>>> On Fri, 22 Jul 2016 11:34:10 -0400
>>> Sinan Kaya <okaya@codeaurora.org> wrote:
>>>
>>>> The current code is enumerating devices based on bus, device and function
>>>> pairs. This does not work well for architectures with multiple PCI
>>>> segments/domains. Multiple PCI devices will have the same BDF value but
>>>> different segment numbers (01:01:01.0 and 02:01:01.0) for instance.
>>>>
>>>> Adding segment numbers to device naming so that we can uniquely identify
>>>> devices.
>>>>
>>>> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
>>>
>>> I ran into this yes. There is a small risk of breaking some application that
>>> assumed something about names though.
>>>
>>> Acked-by: Stephen Hemminger <stephen@networkplumber.org>
>>>
>>
>> Thanks, hopefully the change is minor and can be contained until next release.
>
> It is part of the EAL rework.
> The function has been moved in EAL and includes the PCI domain:
> http://dpdk.org/commit/affe1cdc
>
Thanks for taking care of it.
--
Sinan Kaya
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
^ permalink raw reply
* [PATCH v4] drivers/net:new PMD using tun/tap host interface
From: Keith Wiles @ 2016-10-04 14:45 UTC (permalink / raw)
To: dev; +Cc: pmatilai, yuanhan.liu
In-Reply-To: <1474423220-10207-1-git-send-email-keith.wiles@intel.com>
The rte_eth_tap.c PMD creates a device using TUN/TAP interfaces
on the local host. The PMD allows for DPDK and the host to
communicate using a raw device interface on the host and in
the DPDK application. The device created is a Tap device with
a L2 packet header.
v4 - merge with latest driver changes
v3 - fix includes by removing ifdef for other type besides Linux.
Fix the copyright notice in the Makefile
v2 - merge all of the patches into one patch.
Fix a typo on naming the tap device.
Update the maintainers list
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
---
MAINTAINERS | 5 +
config/common_linuxapp | 2 +
doc/guides/nics/tap.rst | 84 ++++
drivers/net/Makefile | 1 +
drivers/net/tap/Makefile | 57 +++
drivers/net/tap/rte_eth_tap.c | 866 ++++++++++++++++++++++++++++++++
drivers/net/tap/rte_pmd_tap_version.map | 4 +
mk/rte.app.mk | 1 +
8 files changed, 1020 insertions(+)
create mode 100644 doc/guides/nics/tap.rst
create mode 100644 drivers/net/tap/Makefile
create mode 100644 drivers/net/tap/rte_eth_tap.c
create mode 100644 drivers/net/tap/rte_pmd_tap_version.map
diff --git a/MAINTAINERS b/MAINTAINERS
index 7c33ad4..fad74e4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -392,6 +392,11 @@ F: doc/guides/nics/pcap_ring.rst
F: app/test/test_pmd_ring.c
F: app/test/test_pmd_ring_perf.c
+Tap PMD
+M: Keith Wiles <keith.wiles@intel.com>
+F: drivers/net/tap
+F: doc/guides/nics/tap.rst
+
Null Networking PMD
M: Tetsuya Mukawa <mtetsuyah@gmail.com>
F: drivers/net/null/
diff --git a/config/common_linuxapp b/config/common_linuxapp
index 2483dfa..59a2053 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -44,3 +44,5 @@ CONFIG_RTE_LIBRTE_PMD_VHOST=y
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=y
CONFIG_RTE_LIBRTE_POWER=y
CONFIG_RTE_VIRTIO_USER=y
+CONFIG_RTE_LIBRTE_PMD_TAP=y
+CONFIG_RTE_PMD_TAP_MAX_QUEUES=32
diff --git a/doc/guides/nics/tap.rst b/doc/guides/nics/tap.rst
new file mode 100644
index 0000000..072def8
--- /dev/null
+++ b/doc/guides/nics/tap.rst
@@ -0,0 +1,84 @@
+.. BSD LICENSE
+ Copyright(c) 2016 Intel Corporation. All rights reserved.
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Tun/Tap Poll Mode Driver
+========================================
+
+The rte_eth_tap.c PMD creates a device using TUN/TAP interfaces on the local
+host. The PMD allows for DPDK and the host to communicate using a raw device
+interface on the host and in the DPDK application.
+
+The device created is a TAP device, which sends/receives packet in a raw format
+with a L2 header. The usage for a TAP PMD is for connectivity to the local host
+using a TAP interface. When the TAP PMD is initialized it will create a number
+of tap devices in the host accessed via 'ifconfig -a' or 'ip' command. The
+commands can be used to assign and query the virtual like device.
+
+These TAP interfaces can be used with wireshark or tcpdump or Pktgen-DPDK along
+with being able to be used as a network connection to the DPDK application. The
+method enable one or more interfaces is to use the --vdev=eth_tap option on the
+DPDK application command line. Each --vdev=eth_tap option give will create an
+interface named dtap0, dtap1, ... and so forth.
+
+.. code-block:: console
+
+ The interfaced name can be changed by adding the iface=foo0
+ e.g. --vedv=eth_tap,iface=foo0 --vdev=eth_tap,iface=foo1, ...
+
+.. code-block:: console
+
+ Also the speed of the interface can be changed from 10G to whatever number
+ needed, but the interface does not enforce that speed.
+ e.g. --vdev=eth_tap,iface=foo0,speed=25000
+
+After the DPDK application is started you can send and receive packets on the
+interface using the standard rx_burst/tx_burst APIs in DPDK. From the host point
+of view you can use any host tool like tcpdump, wireshark, ping, Pktgen and
+others to communicate with the DPDK application. The DPDK application may not
+understand network protocols like IPv4/6, UDP or TCP unless the application has
+been written to understand these protocols.
+
+If you need the interface as a real network interface meaning running and has
+a valid IP address then you can do this with the following commands:
+
+.. code-block:: console
+
+ sudo ip link set dtap0 up; sudo ip addr add 192.168.0.250/24 dev dtap0
+ sudo ip link set dtap1 up; sudo ip addr add 192.168.1.250/24 dev dtap1
+
+Please change the IP addresses as you see fit.
+
+If routing is enabled on the host you can also communicate with the DPDK App
+over the internet via a standard socket layer application as long as you account
+for the protocol handing in the application.
+
+If you have a Network Stack in your DPDK application or something like it you
+can utilize that stack to handle the network protocols. Plus you would be able
+to address the interface using an IP address assigned to the internal interface.
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index bc93230..b4afa98 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -55,6 +55,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD) += thunderx
DIRS-$(CONFIG_RTE_LIBRTE_VIRTIO_PMD) += virtio
DIRS-$(CONFIG_RTE_LIBRTE_VMXNET3_PMD) += vmxnet3
DIRS-$(CONFIG_RTE_LIBRTE_PMD_XENVIRT) += xenvirt
+DIRS-$(CONFIG_RTE_LIBRTE_PMD_TAP) += tap
ifeq ($(CONFIG_RTE_LIBRTE_VHOST),y)
DIRS-$(CONFIG_RTE_LIBRTE_PMD_VHOST) += vhost
diff --git a/drivers/net/tap/Makefile b/drivers/net/tap/Makefile
new file mode 100644
index 0000000..e18f30c
--- /dev/null
+++ b/drivers/net/tap/Makefile
@@ -0,0 +1,57 @@
+# BSD LICENSE
+#
+# Copyright(c) 2016 Intel Corporation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+#
+# library name
+#
+LIB = librte_pmd_tap.a
+
+EXPORT_MAP := rte_pmd_tap_version.map
+
+LIBABIVER := 1
+
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+
+#
+# all source are stored in SRCS-y
+#
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_TAP) += rte_eth_tap.c
+
+# this lib depends upon:
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_TAP) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_TAP) += lib/librte_mbuf
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_TAP) += lib/librte_mempool
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_TAP) += lib/librte_ether
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_TAP) += lib/librte_kvargs
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/net/tap/rte_eth_tap.c b/drivers/net/tap/rte_eth_tap.c
new file mode 100644
index 0000000..680edd1
--- /dev/null
+++ b/drivers/net/tap/rte_eth_tap.c
@@ -0,0 +1,866 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_mbuf.h>
+#include <rte_ethdev.h>
+#include <rte_malloc.h>
+#include <rte_vdev.h>
+#include <rte_kvargs.h>
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/socket.h>
+#include <sys/ioctl.h>
+#include <sys/mman.h>
+#include <unistd.h>
+#include <poll.h>
+#include <arpa/inet.h>
+#include <linux/if.h>
+#include <linux/if_tun.h>
+#include <linux/if_ether.h>
+#include <fcntl.h>
+
+#include <poll.h>
+
+/* Linux based path to the TUN device */
+#define TUN_TAP_DEV_PATH "/dev/net/tun"
+
+#define ETH_TAP_IFACE_ARG "iface"
+#define ETH_TAP_SPEED_ARG "speed"
+
+static const char *valid_arguments[] = {
+ ETH_TAP_IFACE_ARG,
+ ETH_TAP_SPEED_ARG,
+ NULL
+};
+
+static const char *drivername = "Tap PMD";
+static int tap_unit = 0;
+
+static struct rte_eth_link pmd_link = {
+ .link_speed = ETH_SPEED_NUM_10G,
+ .link_duplex = ETH_LINK_FULL_DUPLEX,
+ .link_status = ETH_LINK_DOWN,
+ .link_autoneg = ETH_LINK_SPEED_AUTONEG
+};
+
+struct tap_info {
+ char name[RTE_ETH_NAME_MAX_LEN]; /* Interface name supplied/given */
+ int speed; /* Speed of interface */
+};
+
+struct pkt_stats {
+ uint64_t opackets; /* Number of output packets */
+ uint64_t ipackets; /* Number of input packets */
+ uint64_t obytes; /* Number of bytes on output */
+ uint64_t ibytes; /* Number of bytes on input */
+ uint64_t errs; /* Number of error packets */
+};
+
+struct rx_queue {
+ struct rte_mempool *mp; /* Mempool for RX packets */
+ uint16_t in_port; /* Port ID */
+ int fd;
+
+ struct pkt_stats stats; /* Stats for this RX queue */
+};
+
+struct tx_queue {
+ int fd;
+ struct pkt_stats stats; /* Stats for this TX queue */
+};
+
+struct pmd_internals {
+ char name[RTE_ETH_NAME_MAX_LEN]; /* Internal Tap device name */
+ uint16_t nb_queues; /* Number of queues supported */
+ uint16_t pad0;
+ struct ether_addr eth_addr; /* Mac address of the device port */
+
+ int if_index; /* IF_INDEX for the port */
+ int fds[RTE_PMD_TAP_MAX_QUEUES]; /* List of all file descriptors */
+
+ struct rx_queue rxq[RTE_PMD_TAP_MAX_QUEUES]; /* List of RX queues */
+ struct tx_queue txq[RTE_PMD_TAP_MAX_QUEUES]; /* List of TX queues */
+};
+
+/*
+ * Tun/Tap allocation routine
+ *
+ * name is the number of the interface to use, unless NULL to take the host
+ * supplied name.
+ */
+static int
+tun_alloc(char * name)
+{
+ struct ifreq ifr;
+ unsigned int features;
+ int fd;
+
+ memset(&ifr, 0, sizeof(struct ifreq));
+
+ ifr.ifr_flags = IFF_TAP | IFF_NO_PI;
+ if (name && name[0])
+ strncpy(ifr.ifr_name, name, IFNAMSIZ);
+
+ fd = open(TUN_TAP_DEV_PATH, O_RDWR);
+ if (fd < 0) {
+ RTE_LOG(ERR, PMD, "Unable to create TAP interface");
+ goto error;
+ }
+
+ /* Grab the TUN features to verify we can work */
+ if (ioctl(fd, TUNGETFEATURES, &features) < 0) {
+ RTE_LOG(ERR, PMD, "Unable to get TUN/TAP features\n");
+ goto error;
+ }
+ RTE_LOG(DEBUG, PMD, "TUN/TAP Features %08x\n", features);
+
+ if (!(features & IFF_MULTI_QUEUE) && (RTE_PMD_TAP_MAX_QUEUES > 1)) {
+ RTE_LOG(DEBUG, PMD, "TUN/TAP device only one queue\n");
+ goto error;
+ } else if ((features & IFF_ONE_QUEUE) && (RTE_PMD_TAP_MAX_QUEUES == 1)) {
+ ifr.ifr_flags |= IFF_ONE_QUEUE;
+ RTE_LOG(DEBUG, PMD, "Single queue only support\n");
+ } else {
+ ifr.ifr_flags |= IFF_MULTI_QUEUE;
+ RTE_LOG(DEBUG, PMD, "Multi-queue support for %d queues\n",
+ RTE_PMD_TAP_MAX_QUEUES);
+ }
+
+ /* Set the TUN/TAP configuration and get the name if needed */
+ if (ioctl(fd, TUNSETIFF, (void *)&ifr) < 0) {
+ RTE_LOG(ERR, PMD, "Unable to set TUNSETIFF for %s\n", ifr.ifr_name);
+ perror("TUNSETIFF");
+ goto error;
+ }
+
+ /* Always set the fiile descriptor to non-blocking */
+ if (fcntl(fd, F_SETFL, O_NONBLOCK) < 0) {
+ RTE_LOG(ERR, PMD, "Unable to set to nonblocking\n");
+ perror("F_SETFL, NONBLOCK");
+ goto error;
+ }
+
+ /* If the name is different that new name as default */
+ if (name && strcmp(name, ifr.ifr_name))
+ strcpy(name, ifr.ifr_name);
+
+ return fd;
+
+error:
+ if (fd > 0)
+ close(fd);
+ return -1;
+}
+
+/*
+ * Callback to handle the rx burst of packets to the correct interface and file
+ * descriptor(s) in a multi-queue setup.
+ */
+static uint16_t
+pmd_rx_burst(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
+{
+ int len, n;
+ struct rte_mbuf *mbuf;
+ struct rx_queue *rxq = queue;
+ struct pollfd pfd;
+ uint16_t num_rx;
+ unsigned long num_rx_bytes = 0;
+
+ pfd.events = POLLIN;
+ pfd.fd = rxq->fd;
+ for (num_rx = 0; num_rx < nb_pkts; ) {
+ n = poll(&pfd, 1, 0);
+
+ if (n <= 0)
+ break;
+
+ if (pfd.revents == 0)
+ continue;
+
+ if (pfd.revents & POLLERR) {
+ rxq->stats.errs++;
+ RTE_LOG(ERR, PMD, "Packet Error\n");
+ break;
+ }
+ if (pfd.revents & POLLHUP)
+ RTE_LOG(ERR, PMD, "Peer closed connection\n");
+
+ /* allocate the next mbuf */
+ mbuf = rte_pktmbuf_alloc(rxq->mp);
+ if (unlikely(mbuf == NULL)) {
+ RTE_LOG(ERR, PMD, "Unable to allocate mbuf\n");
+ break;
+ }
+
+ len = read(pfd.fd, rte_pktmbuf_mtod(mbuf, char *),
+ rte_pktmbuf_tailroom(mbuf));
+ if (len <= 0) {
+ RTE_LOG(ERR, PMD, "len %d\n", len);
+ rte_pktmbuf_free(mbuf);
+ break;
+ }
+
+ mbuf->data_len = len;
+ mbuf->pkt_len = len;
+ mbuf->port = rxq->in_port;
+
+ /* account for the receive frame */
+ bufs[num_rx++] = mbuf;
+ num_rx_bytes += mbuf->pkt_len;
+ }
+ rxq->stats.ipackets += num_rx;
+ rxq->stats.ibytes += num_rx_bytes;
+
+ return num_rx;
+}
+
+/*
+ * Callback to handle sending packets from the tap interface
+ */
+static uint16_t
+pmd_tx_burst(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
+{
+ struct rte_mbuf *mbuf;
+ struct tx_queue *txq = queue;
+ struct pollfd pfd;
+ uint16_t num_tx = 0;
+ unsigned long num_tx_bytes = 0;
+ int i, n;
+
+ if (unlikely(nb_pkts == 0))
+ return 0;
+
+ pfd.events = POLLOUT;
+ pfd.fd = txq->fd;
+ for (i = 0; i < nb_pkts; i++) {
+ n = poll(&pfd, 1, 0);
+
+ if (n <= 0)
+ break;
+
+ if (pfd.revents & POLLOUT) {
+ /* copy the tx frame data */
+ mbuf = bufs[num_tx];
+ n = write(pfd.fd, rte_pktmbuf_mtod(mbuf, void*),
+ rte_pktmbuf_pkt_len(mbuf));
+ if (n <= 0)
+ break;
+
+ num_tx++;
+ num_tx_bytes += mbuf->pkt_len;
+ rte_pktmbuf_free(mbuf);
+ }
+ }
+
+ txq->stats.opackets += num_tx;
+ txq->stats.errs += nb_pkts - num_tx;
+ txq->stats.obytes += num_tx_bytes;
+
+ return num_tx;
+}
+
+static int
+tap_dev_start(struct rte_eth_dev *dev)
+{
+ /* Force the Link up */
+ dev->data->dev_link.link_status = ETH_LINK_UP;
+
+ return 0;
+}
+
+/*
+ * This function gets called when the current port gets stopped.
+ */
+static void
+tap_dev_stop(struct rte_eth_dev *dev)
+{
+ int i;
+ struct pmd_internals *internals = dev->data->dev_private;
+
+ for (i = 0; i < internals->nb_queues; i++)
+ if (internals->fds[i] != -1)
+ close(internals->fds[i]);
+
+ dev->data->dev_link.link_status = ETH_LINK_DOWN;
+}
+
+static int
+tap_dev_configure(struct rte_eth_dev *dev __rte_unused)
+{
+ return 0;
+}
+
+static void
+tap_dev_info(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
+{
+ struct pmd_internals *internals = dev->data->dev_private;
+
+ dev_info->driver_name = drivername;
+ dev_info->if_index = internals->if_index;
+ dev_info->max_mac_addrs = 1;
+ dev_info->max_rx_pktlen = (uint32_t)ETHER_MAX_VLAN_FRAME_LEN;
+ dev_info->max_rx_queues = (uint16_t)internals->nb_queues;
+ dev_info->max_tx_queues = (uint16_t)internals->nb_queues;
+ dev_info->min_rx_bufsize = 0;
+ dev_info->pci_dev = NULL;
+}
+
+static void
+tap_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *igb_stats)
+{
+ unsigned i, imax;
+ unsigned long rx_total = 0, tx_total = 0, tx_err_total = 0;
+ unsigned long rx_bytes_total = 0, tx_bytes_total = 0;
+ const struct pmd_internals *internal = dev->data->dev_private;
+
+ imax = (internal->nb_queues < RTE_ETHDEV_QUEUE_STAT_CNTRS) ?
+ internal->nb_queues : RTE_ETHDEV_QUEUE_STAT_CNTRS;
+
+ for (i = 0; i < imax; i++) {
+ igb_stats->q_ipackets[i] = internal->rxq[i].stats.ipackets;
+ igb_stats->q_ibytes[i] = internal->rxq[i].stats.ibytes;
+ rx_total += igb_stats->q_ipackets[i];
+ rx_bytes_total += igb_stats->q_ibytes[i];
+ }
+
+ imax = (internal->nb_queues < RTE_ETHDEV_QUEUE_STAT_CNTRS) ?
+ internal->nb_queues : RTE_ETHDEV_QUEUE_STAT_CNTRS;
+
+ for (i = 0; i < imax; i++) {
+ igb_stats->q_opackets[i] = internal->txq[i].stats.opackets;
+ igb_stats->q_errors[i] = internal->txq[i].stats.errs;
+ igb_stats->q_obytes[i] = internal->txq[i].stats.obytes;
+ tx_total += igb_stats->q_opackets[i];
+ tx_err_total += igb_stats->q_errors[i];
+ tx_bytes_total += igb_stats->q_obytes[i];
+ }
+
+ igb_stats->ipackets = rx_total;
+ igb_stats->ibytes = rx_bytes_total;
+ igb_stats->opackets = tx_total;
+ igb_stats->oerrors = tx_err_total;
+ igb_stats->obytes = tx_bytes_total;
+}
+
+static void
+tap_stats_reset(struct rte_eth_dev *dev)
+{
+ int i;
+ struct pmd_internals *internal = dev->data->dev_private;
+
+ for (i = 0; i < internal->nb_queues; i++) {
+ internal->rxq[i].stats.ipackets = 0;
+ internal->rxq[i].stats.ibytes = 0;
+ }
+
+ for (i = 0; i < internal->nb_queues; i++) {
+ internal->txq[i].stats.opackets = 0;
+ internal->txq[i].stats.errs = 0;
+ internal->txq[i].stats.obytes = 0;
+ }
+}
+
+static void
+tap_dev_close(struct rte_eth_dev *dev __rte_unused)
+{
+}
+
+static void
+tap_rx_queue_release(void *queue)
+{
+ struct rx_queue *rxq = queue;
+
+ if (rxq && (rxq->fd > 0)) {
+ close(rxq->fd);
+ rxq->fd = -1;
+ }
+}
+
+static void
+tap_tx_queue_release(void *queue)
+{
+ struct tx_queue *txq = queue;
+
+ if (txq && (txq->fd > 0)) {
+ close(txq->fd);
+ txq->fd = -1;
+ }
+}
+
+static int
+tap_link_update(struct rte_eth_dev *dev __rte_unused,
+ int wait_to_complete __rte_unused)
+{
+ return 0;
+}
+
+static int
+tap_setup_queue(struct rte_eth_dev *dev,
+ struct pmd_internals *internals,
+ uint16_t qid)
+{
+ struct rx_queue *rx = &internals->rxq[qid];
+ struct tx_queue *tx = &internals->txq[qid];
+ int fd;
+
+ if ((fd = rx->fd) < 0)
+ if ((fd = tx->fd) < 0) {
+ RTE_LOG(INFO, PMD, "Add queue to TAP %s for qid %d\n",
+ dev->data->name, qid);
+ if ((fd = tun_alloc(dev->data->name)) < 0) {
+ RTE_LOG(ERR, PMD, "tun_alloc(%s) failed\n", dev->data->name);
+ return -1;
+ }
+ }
+
+ dev->data->rx_queues[qid] = rx;
+ dev->data->tx_queues[qid] = tx;
+
+ rx->fd = tx->fd = fd;
+
+ return fd;
+}
+
+static int
+tap_rx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id,
+ uint16_t nb_rx_desc __rte_unused,
+ unsigned int socket_id __rte_unused,
+ const struct rte_eth_rxconf *rx_conf __rte_unused,
+ struct rte_mempool *mp)
+{
+ struct pmd_internals *internals = dev->data->dev_private;
+ uint16_t buf_size;
+ int fd;
+
+ if ((rx_queue_id >= internals->nb_queues) || (mp == NULL)) {
+ RTE_LOG(ERR, PMD, "nb_queues %d mp %p\n", internals->nb_queues, mp);
+ return -1;
+ }
+
+ internals->rxq[rx_queue_id].mp = mp;
+ internals->rxq[rx_queue_id].in_port = dev->data->port_id;
+
+ /* Now get the space available for data in the mbuf */
+ buf_size = (uint16_t) (rte_pktmbuf_data_room_size(mp) -
+ RTE_PKTMBUF_HEADROOM);
+
+ if (buf_size < ETH_FRAME_LEN) {
+ RTE_LOG(ERR, PMD,
+ "%s: %d bytes will not fit in mbuf (%d bytes)\n",
+ dev->data->name, ETH_FRAME_LEN, buf_size);
+ return -ENOMEM;
+ }
+
+ fd = tap_setup_queue(dev, internals, rx_queue_id);
+ if (fd == -1)
+ return -1;
+
+ internals->fds[rx_queue_id] = fd;
+ RTE_LOG(INFO, PMD, "RX TAP device name %s, qid %d on fd %d\n",
+ dev->data->name, rx_queue_id, internals->rxq[rx_queue_id].fd);
+
+ return 0;
+}
+
+static int
+tap_tx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t tx_queue_id,
+ uint16_t nb_tx_desc __rte_unused,
+ unsigned int socket_id __rte_unused,
+ const struct rte_eth_txconf *tx_conf __rte_unused)
+{
+ struct pmd_internals *internals = dev->data->dev_private;
+ int ret = -1;
+
+ if (tx_queue_id >= internals->nb_queues)
+ return -1;
+
+ ret = tap_setup_queue(dev, internals, tx_queue_id);
+
+ RTE_LOG(INFO, PMD, "TX TAP device name %s, qid %d on fd %d\n",
+ dev->data->name, tx_queue_id, internals->txq[tx_queue_id].fd);
+
+ return ret;
+}
+
+static const struct eth_dev_ops ops = {
+ .dev_start = tap_dev_start,
+ .dev_stop = tap_dev_stop,
+ .dev_close = tap_dev_close,
+ .dev_configure = tap_dev_configure,
+ .dev_infos_get = tap_dev_info,
+ .rx_queue_setup = tap_rx_queue_setup,
+ .tx_queue_setup = tap_tx_queue_setup,
+ .rx_queue_release = tap_rx_queue_release,
+ .tx_queue_release = tap_tx_queue_release,
+ .link_update = tap_link_update,
+ .stats_get = tap_stats_get,
+ .stats_reset = tap_stats_reset,
+};
+
+#define RTE_USE_GLOBAL_DATA 0x0000
+#define RTE_USE_PRIVATE_DATA 0x0001
+
+static int
+pmd_mac_address(int fd, struct rte_eth_dev *dev, struct ether_addr *addr)
+{
+ struct ifreq ifr;
+
+ if ((fd <= 0) || (dev == NULL) || (addr == NULL))
+ return -1;
+
+ memset(&ifr, 0, sizeof(ifr));
+
+ if (ioctl(fd, SIOCGIFHWADDR, &ifr) == -1) {
+ RTE_LOG(ERR, PMD, "ioctl failed (SIOCGIFHWADDR) (%s)\n",
+ ifr.ifr_name);
+ return -1;
+ }
+
+ /* Set the host based MAC address to this special MAC format */
+ ifr.ifr_hwaddr.sa_data[0] = 'T';
+ ifr.ifr_hwaddr.sa_data[1] = 'a';
+ ifr.ifr_hwaddr.sa_data[2] = 'p';
+ ifr.ifr_hwaddr.sa_data[3] = '-';
+ ifr.ifr_hwaddr.sa_data[4] = dev->data->port_id;
+ ifr.ifr_hwaddr.sa_data[5] = dev->data->numa_node;
+ if (ioctl(fd, SIOCSIFHWADDR, &ifr) == -1) {
+ RTE_LOG(ERR, PMD, "%s: ioctl failed (SIOCSIFHWADDR) (%s)\n",
+ dev->data->name, ifr.ifr_name);
+ return -1;
+ }
+
+ /*
+ * Set the local application MAC address, needs to be different then
+ * the host based MAC address.
+ */
+ ifr.ifr_hwaddr.sa_data[0] = 'd';
+ ifr.ifr_hwaddr.sa_data[1] = 'n';
+ ifr.ifr_hwaddr.sa_data[2] = 'e';
+ ifr.ifr_hwaddr.sa_data[3] = 't';
+ ifr.ifr_hwaddr.sa_data[4] = dev->data->port_id;
+ ifr.ifr_hwaddr.sa_data[5] = dev->data->numa_node;
+ memcpy(addr, ifr.ifr_hwaddr.sa_data, ETH_ALEN);
+
+ return 0;
+}
+
+static int
+rte_eth_dev_create(const char *name,
+ struct rte_eth_dev **eth_dev,
+ const struct eth_dev_ops *dev_ops,
+ void **internals, size_t internal_size,
+ uint16_t flag)
+{
+ char buff[RTE_ETH_NAME_MAX_LEN];
+ int numa_node = rte_socket_id();
+ struct rte_eth_dev *dev = NULL;
+ struct rte_eth_dev_data *data = NULL;
+ void *priv = NULL;
+
+ if ((name == NULL) || (eth_dev == NULL) || (dev_ops == NULL) ||
+ (internals == NULL) || (internal_size == 0)) {
+ RTE_PMD_DEBUG_TRACE("Paramters are invalid\n");
+ return -1;
+ }
+
+ dev = rte_eth_dev_allocate(name);
+ if (dev == NULL) {
+ RTE_PMD_DEBUG_TRACE("%s: rte_eth_dev_allocate failed for %s\n",
+ name, buff);
+ goto error;
+ }
+
+ if (flag & RTE_USE_PRIVATE_DATA) {
+ /*
+ * now do all data allocation - for eth_dev structure, dummy
+ * pci driver and internal (private) data
+ */
+ snprintf(buff, sizeof(buff), "D-%s-%d", name, numa_node);
+ data = rte_zmalloc_socket(buff, sizeof(struct rte_eth_dev_data),
+ 0, numa_node);
+ if (data == NULL) {
+ RTE_PMD_DEBUG_TRACE("%s: Unable to allocate memory\n",
+ name);
+ goto error;
+ }
+ /* move the current state of the structure to the new one */
+ rte_memcpy(data, dev->data, sizeof(struct rte_eth_dev_data));
+ dev->data = data; /* Override the current data pointer */
+ } else
+ data = dev->data;
+
+ snprintf(buff, sizeof(buff), "I-%s-%d", name, numa_node);
+ priv = rte_zmalloc_socket(buff, internal_size, 0, numa_node);
+ if (priv == NULL) {
+ RTE_PMD_DEBUG_TRACE("Unable to allocate internal memory %lu\n",
+ internal_size);
+ goto error;
+ }
+
+ /* Setup some default values */
+ dev->dev_ops = dev_ops;
+ data->dev_private = priv;
+ data->port_id = dev->data->port_id;
+ memmove(data->name, dev->data->name, strlen(dev->data->name));
+
+ dev->driver = NULL;
+ data->dev_flags = RTE_ETH_DEV_DETACHABLE;
+ data->kdrv = RTE_KDRV_NONE;
+ data->numa_node = numa_node;
+
+ *eth_dev = dev;
+ *internals = priv;
+
+ return 0;
+error:
+ rte_free(priv);
+
+ if (flag & RTE_USE_PRIVATE_DATA)
+ rte_free(data);
+
+ rte_eth_dev_release_port(dev);
+
+ return -1;
+}
+
+static int
+pmd_init_internals(const char *name, struct tap_info *tap,
+ struct pmd_internals **internals,
+ struct rte_eth_dev **eth_dev)
+{
+ struct rte_eth_dev *dev = NULL;
+ struct pmd_internals *internal = NULL;
+ struct rte_eth_dev_data *data = NULL;
+ int ret, i, fd = -1;
+
+ RTE_LOG(INFO, PMD,
+ "%s: Create TUN/TAP Ethernet device with %d queues on numa %u\n",
+ name, RTE_PMD_TAP_MAX_QUEUES, rte_socket_id());
+
+ pmd_link.link_speed = tap->speed;
+
+ ret = rte_eth_dev_create(tap->name, &dev, &ops,
+ (void **)&internal, sizeof(struct pmd_internals),
+ RTE_USE_PRIVATE_DATA);
+ if (ret < 0)
+ return -1;
+
+ strncpy(internal->name, tap->name, sizeof(internal->name));
+
+ internal->nb_queues = RTE_PMD_TAP_MAX_QUEUES;
+
+ /* Create the first Tap device */
+ if ((fd = tun_alloc(dev->data->name)) < 0) {
+ RTE_LOG(ERR, PMD, "tun_alloc(%s) failed\n", dev->data->name);
+ rte_free(internal);
+ rte_eth_dev_release_port(dev);
+ return -1;
+ }
+
+ /* Presetup the fds to -1 as being not working */
+ for(i = 0; i < RTE_PMD_TAP_MAX_QUEUES; i++) {
+ internal->fds[i] = -1;
+ internal->rxq[i].fd = -1;
+ internal->txq[i].fd = -1;
+ }
+
+ /* Take the TUN/TAP fd and place in the first location */
+ internal->rxq[0].fd = fd;
+ internal->txq[0].fd = fd;
+ internal->fds[0] = fd;
+
+ if (pmd_mac_address(fd, dev, &internal->eth_addr) < 0) {
+ rte_free(internal);
+ rte_eth_dev_release_port(dev);
+ return -1;
+ }
+
+ data = dev->data;
+
+ data->dev_link = pmd_link;
+ data->mac_addrs = &internal->eth_addr;
+
+ data->nb_rx_queues = (uint16_t)internal->nb_queues;
+ data->nb_tx_queues = (uint16_t)internal->nb_queues;
+ data->drv_name = drivername;
+
+ *eth_dev = dev;
+ *internals = internal;
+
+ return 0;
+}
+
+static int
+eth_dev_tap_create(const char *name, struct tap_info *tap)
+{
+ struct pmd_internals *internals = NULL;
+ struct rte_eth_dev *eth_dev = NULL;
+
+ if (pmd_init_internals(name, tap, &internals, ð_dev) < 0)
+ return -1;
+
+ eth_dev->rx_pkt_burst = pmd_rx_burst;
+ eth_dev->tx_pkt_burst = pmd_tx_burst;
+
+ return 0;
+}
+
+static int
+set_interface_name(const char *key __rte_unused,
+ const char *value,
+ void *extra_args)
+{
+ struct tap_info *tap = (struct tap_info *)extra_args;
+
+ if (value)
+ snprintf(tap->name, sizeof(tap->name), "%s", value);
+ else
+ snprintf(tap->name, sizeof(tap->name), "dtap%d", (tap_unit - 1));
+
+ return 0;
+}
+
+static int
+set_interface_speed(const char *key __rte_unused,
+ const char *value,
+ void *extra_args __rte_unused)
+{
+ struct tap_info *tap = (struct tap_info *)extra_args;
+
+ pmd_link.link_speed = (value) ? atoi(value) : ETH_SPEED_NUM_10G;
+ tap->speed = pmd_link.link_speed;
+
+ return 0;
+}
+
+/*
+ * Open a TAP interface device.
+ */
+static int
+rte_pmd_tap_devinit(const char *name, const char *params)
+{
+ int ret = 0;
+ struct rte_kvargs *kvlist;
+ struct tap_info tap_info;
+
+ /* Setup default values */
+ memset(&tap_info, 0, sizeof(tap_info));
+
+ tap_info.speed = ETH_SPEED_NUM_10G;
+ snprintf(tap_info.name, sizeof(tap_info.name), "dtap%d", tap_unit++);
+
+ if ((params == NULL) || (params[0] == '\0')) {
+ RTE_LOG(INFO, PMD, "Initializing pmd_tap for %s\n", name);
+
+ ret = eth_dev_tap_create(name, &tap_info);
+ goto leave;
+ }
+
+ RTE_LOG(INFO, PMD, "Initialize %s with params (%s)\n", name, params);
+
+ kvlist = rte_kvargs_parse(params, valid_arguments);
+ if (!kvlist) {
+ ret = eth_dev_tap_create(name, &tap_info);
+ goto leave;
+ }
+
+ if (rte_kvargs_count(kvlist, ETH_TAP_SPEED_ARG) == 1) {
+ ret = rte_kvargs_process(kvlist, ETH_TAP_SPEED_ARG,
+ &set_interface_speed, &tap_info);
+ if (ret < 0)
+ goto leave;
+ } else
+ set_interface_speed(NULL, NULL, &tap_info);
+
+ if (rte_kvargs_count(kvlist, ETH_TAP_IFACE_ARG) == 1) {
+ ret = rte_kvargs_process(kvlist, ETH_TAP_IFACE_ARG,
+ &set_interface_name, &tap_info);
+ if (ret < 0)
+ goto leave;
+ } else
+ set_interface_name(NULL, NULL, (void *)&tap_info);
+
+ rte_kvargs_free(kvlist);
+
+leave:
+ if (ret == -1)
+ RTE_LOG(INFO, PMD, "Failed to create pmd_tap for %s\n", name);
+
+ return ret;
+}
+
+/*
+ * detach a TAP device.
+ */
+static int
+rte_pmd_tap_devuninit(const char *name)
+{
+ struct rte_eth_dev *eth_dev = NULL;
+ struct pmd_internals *internals;
+ int i;
+
+ RTE_LOG(INFO, PMD, "Closing TUN/TAP Ethernet device on numa %u\n",
+ rte_socket_id());
+
+ if (name == NULL)
+ return 0;
+
+ /* find the ethdev entry */
+ eth_dev = rte_eth_dev_allocated(name);
+ if (eth_dev == NULL)
+ return 0;
+
+ internals = eth_dev->data->dev_private;
+ for (i = 0; i < internals->nb_queues; i++)
+ if (internals->fds[i] != -1)
+ close(internals->fds[i]);
+
+ rte_free(eth_dev->data->dev_private);
+ rte_free(eth_dev->data);
+
+ rte_eth_dev_release_port(eth_dev);
+
+ return 0;
+}
+
+static struct rte_vdev_driver pmd_tap_drv = {
+ .init = rte_pmd_tap_devinit,
+ .uninit = rte_pmd_tap_devuninit,
+};
+
+DRIVER_REGISTER_VDEV(eth_tap, pmd_tap_drv);
+DRIVER_REGISTER_PARAM_STRING(eth_tap,
+ "iface=<string>,speed=N");
diff --git a/drivers/net/tap/rte_pmd_tap_version.map b/drivers/net/tap/rte_pmd_tap_version.map
new file mode 100644
index 0000000..61463bf
--- /dev/null
+++ b/drivers/net/tap/rte_pmd_tap_version.map
@@ -0,0 +1,4 @@
+DPDK_16.11 {
+
+ local: *;
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 1a0095b..bd1d10f 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -129,6 +129,7 @@ ifeq ($(CONFIG_RTE_LIBRTE_VHOST),y)
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_VHOST) += -lrte_pmd_vhost
endif # $(CONFIG_RTE_LIBRTE_VHOST)
_LDLIBS-$(CONFIG_RTE_LIBRTE_VMXNET3_PMD) += -lrte_pmd_vmxnet3_uio
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_TAP) += -lrte_pmd_tap
ifeq ($(CONFIG_RTE_LIBRTE_CRYPTODEV),y)
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB) += -lrte_pmd_aesni_mb
--
2.8.0.GIT
^ permalink raw reply related
* [PATCH v4 0/2] add callbacks for VF management
From: Bernard Iremonger @ 2016-10-04 14:52 UTC (permalink / raw)
To: dev, rahul.r.shah, wenzhuo.lu, az5157, jerin.jacob; +Cc: Bernard Iremonger
In-Reply-To: <1475250308-5498-1-git-send-email-bernard.iremonger@intel.com>
This patchset contains new callback functions intended for VF management.
Two new callback functions have been added.
Changes have been made to the ixgbe_rcv_msg_from_vf function to
use the callback functions.
This patchset depends on the following patch.
http://dpdk.org/dev/patchwork/patch/16296/
[dpdk-dev,v6,1/2] net/ixgbe: add API's for VF management
These patches were part of the RFC PATCH v2 of the above patchset,
but were dropped from the v3 patchset.
Changes in v4:
Rebased to latest master.
Moved the callback parameter structure from the ethdev to the ixgbe PMD.
Changes in v3:
Rebased to latest master.
Submitted as a seperate patchset.
Moved the response enums from the ethdev to the ixgbe PMD.
Changes in v2:
Rebased to latest master.
Bernard Iremonger (2):
librte_ether: add internal callback functions
net/ixgbe: add callback to user app on VF to PF mbox msg
drivers/net/ixgbe/ixgbe_pf.c | 42 +++++++++++++++++++++++++++-----
drivers/net/ixgbe/rte_pmd_ixgbe.h | 17 +++++++++++++
lib/librte_ether/rte_ethdev.c | 17 +++++++++++++
lib/librte_ether/rte_ethdev.h | 44 ++++++++++++++++++++++++++++++++++
lib/librte_ether/rte_ether_version.map | 2 ++
5 files changed, 116 insertions(+), 6 deletions(-)
--
2.9.0
^ permalink raw reply
* [PATCH v4 1/2] librte_ether: add internal callback functions
From: Bernard Iremonger @ 2016-10-04 14:52 UTC (permalink / raw)
To: dev, rahul.r.shah, wenzhuo.lu, az5157, jerin.jacob; +Cc: Bernard Iremonger
In-Reply-To: <1475250308-5498-1-git-send-email-bernard.iremonger@intel.com>
add _rte_eth_dev_callback_process_vf function.
add _rte_eth_dev_callback_process_generic function
Adding a callback to the user application on VF to PF mailbox message,
allows passing information to the application controlling the PF
when a VF mailbox event message is received, such as VF reset.
Signed-off-by: Alex Zelezniak <az5157@att.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
---
lib/librte_ether/rte_ethdev.c | 17 +++++++++++++
lib/librte_ether/rte_ethdev.h | 44 ++++++++++++++++++++++++++++++++++
lib/librte_ether/rte_ether_version.map | 2 ++
3 files changed, 63 insertions(+)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index c517e88..e850d88 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -2510,6 +2510,20 @@ void
_rte_eth_dev_callback_process(struct rte_eth_dev *dev,
enum rte_eth_event_type event)
{
+ return _rte_eth_dev_callback_process_generic(dev, event, NULL);
+}
+
+void
+_rte_eth_dev_callback_process_vf(struct rte_eth_dev *dev,
+ enum rte_eth_event_type event, void *param)
+{
+ return _rte_eth_dev_callback_process_generic(dev, event, param);
+}
+
+void
+_rte_eth_dev_callback_process_generic(struct rte_eth_dev *dev,
+ enum rte_eth_event_type event, void *param)
+{
struct rte_eth_dev_callback *cb_lst;
struct rte_eth_dev_callback dev_cb;
@@ -2519,6 +2533,9 @@ _rte_eth_dev_callback_process(struct rte_eth_dev *dev,
continue;
dev_cb = *cb_lst;
cb_lst->active = 1;
+ if (param != NULL)
+ dev_cb.cb_arg = (void *) param;
+
rte_spinlock_unlock(&rte_eth_dev_cb_lock);
dev_cb.cb_fn(dev->data->port_id, dev_cb.event,
dev_cb.cb_arg);
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 7218b6f..b418c5e 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -3026,6 +3026,7 @@ enum rte_eth_event_type {
/**< queue state event (enabled/disabled) */
RTE_ETH_EVENT_INTR_RESET,
/**< reset interrupt event, sent to VF on PF reset */
+ RTE_ETH_EVENT_VF_MBOX, /**< PF mailbox processing callback */
RTE_ETH_EVENT_MAX /**< max value of this enum */
};
@@ -3093,6 +3094,49 @@ void _rte_eth_dev_callback_process(struct rte_eth_dev *dev,
enum rte_eth_event_type event);
/**
+ * @internal Executes all the user application registered callbacks for
+ * the specific device where parameter have to be passed to user application.
+ * It is for DPDK internal user only. User application should not call it
+ * directly.
+ *
+ * @param dev
+ * Pointer to struct rte_eth_dev.
+ * @param event
+ * Eth device interrupt event type.
+ *
+ * @param param
+ * parameters to pass back to user application.
+ *
+ * @return
+ * void
+ */
+
+void
+_rte_eth_dev_callback_process_vf(struct rte_eth_dev *dev,
+ enum rte_eth_event_type event, void *param);
+
+/**
+ * @internal Executes all the user application registered callbacks. Used by:
+ * _rte_eth_dev_callback_process and _rte_eth_dev_callback_process_vf
+ * It is for DPDK internal user only. User application should not call it
+ * directly.
+ *
+ * @param dev
+ * Pointer to struct rte_eth_dev.
+ * @param event
+ * Eth device interrupt event type.
+ *
+ * @param param
+ * parameters to pass back to user application.
+ *
+ * @return
+ * void
+ */
+void
+_rte_eth_dev_callback_process_generic(struct rte_eth_dev *dev,
+ enum rte_eth_event_type event, void *param);
+
+/**
* When there is no rx packet coming in Rx Queue for a long time, we can
* sleep lcore related to RX Queue for power saving, and enable rx interrupt
* to be triggered when rx packect arrives.
diff --git a/lib/librte_ether/rte_ether_version.map b/lib/librte_ether/rte_ether_version.map
index 72be66d..6f97a8f 100644
--- a/lib/librte_ether/rte_ether_version.map
+++ b/lib/librte_ether/rte_ether_version.map
@@ -143,6 +143,8 @@ DPDK_16.07 {
DPDK_16.11 {
global:
+ _rte_eth_dev_callback_process_generic;
+ _rte_eth_dev_callback_process_vf;
rte_eth_dev_pci_probe;
rte_eth_dev_pci_remove;
--
2.9.0
^ permalink raw reply related
* [PATCH v4 2/2] net/ixgbe: add callback to user app on VF to PF mbox msg
From: Bernard Iremonger @ 2016-10-04 14:52 UTC (permalink / raw)
To: dev, rahul.r.shah, wenzhuo.lu, az5157, jerin.jacob; +Cc: Bernard Iremonger
In-Reply-To: <1475250308-5498-1-git-send-email-bernard.iremonger@intel.com>
call _rte_eth_dev_callback_process_vf from ixgbe_rcv_msg_from_vf function.
The callback asks the user application if it is allowed to perform
the function.
If the cb_param.retval is RTE_PMD_IXGBE_MB_EVENT_PROCEED then continue,
if 0, do nothing and send ACK to VF
if > 1, do nothing and send NAK to VF.
Signed-off-by: Alex Zelezniak <az5157@att.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
---
drivers/net/ixgbe/ixgbe_pf.c | 42 +++++++++++++++++++++++++++++++++------
drivers/net/ixgbe/rte_pmd_ixgbe.h | 17 ++++++++++++++++
2 files changed, 53 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_pf.c b/drivers/net/ixgbe/ixgbe_pf.c
index 56393ff..5277517 100644
--- a/drivers/net/ixgbe/ixgbe_pf.c
+++ b/drivers/net/ixgbe/ixgbe_pf.c
@@ -1,7 +1,7 @@
/*-
* BSD LICENSE
*
- * Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ * Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -51,6 +51,7 @@
#include "base/ixgbe_common.h"
#include "ixgbe_ethdev.h"
+#include "rte_pmd_ixgbe.h"
#define IXGBE_MAX_VFTA (128)
#define IXGBE_VF_MSG_SIZE_DEFAULT 1
@@ -660,6 +661,7 @@ ixgbe_rcv_msg_from_vf(struct rte_eth_dev *dev, uint16_t vf)
struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct ixgbe_vf_info *vfinfo =
*IXGBE_DEV_PRIVATE_TO_P_VFDATA(dev->data->dev_private);
+ struct rte_pmd_ixgbe_mb_event_param cb_param;
retval = ixgbe_read_mbx(hw, msgbuf, mbx_size, vf);
if (retval) {
@@ -674,27 +676,54 @@ ixgbe_rcv_msg_from_vf(struct rte_eth_dev *dev, uint16_t vf)
/* flush the ack before we write any messages back */
IXGBE_WRITE_FLUSH(hw);
+ /**
+ * initialise structure to send to user application
+ * will return response from user in retval field
+ */
+ cb_param.retval = RTE_PMD_IXGBE_MB_EVENT_PROCEED;
+ cb_param.vfid = vf;
+ cb_param.msg_type = msgbuf[0] & 0xFFFF;
+ cb_param.userdata = (void *)msgbuf;
+
/* perform VF reset */
if (msgbuf[0] == IXGBE_VF_RESET) {
int ret = ixgbe_vf_reset(dev, vf, msgbuf);
vfinfo[vf].clear_to_send = true;
+
+ /* notify application about VF reset */
+ _rte_eth_dev_callback_process_vf(dev, RTE_ETH_EVENT_VF_MBOX, &cb_param);
return ret;
}
+ /**
+ * ask user application if we allowed to perform those functions
+ * if we get cb_param.retval == RTE_PMD_IXGBE_MB_EVENT_PROCEED
+ * then business as usual,
+ * if 0, do nothing and send ACK to VF
+ * if cb_param.retval > 1, do nothing and send NAK to VF
+ */
+ _rte_eth_dev_callback_process_vf(dev, RTE_ETH_EVENT_VF_MBOX, &cb_param);
+
+ retval = cb_param.retval;
+
/* check & process VF to PF mailbox message */
switch ((msgbuf[0] & 0xFFFF)) {
case IXGBE_VF_SET_MAC_ADDR:
- retval = ixgbe_vf_set_mac_addr(dev, vf, msgbuf);
+ if (retval == RTE_PMD_IXGBE_MB_EVENT_PROCEED)
+ retval = ixgbe_vf_set_mac_addr(dev, vf, msgbuf);
break;
case IXGBE_VF_SET_MULTICAST:
- retval = ixgbe_vf_set_multicast(dev, vf, msgbuf);
+ if (retval == RTE_PMD_IXGBE_MB_EVENT_PROCEED)
+ retval = ixgbe_vf_set_multicast(dev, vf, msgbuf);
break;
case IXGBE_VF_SET_LPE:
- retval = ixgbe_set_vf_lpe(dev, vf, msgbuf);
+ if (retval == RTE_PMD_IXGBE_MB_EVENT_PROCEED)
+ retval = ixgbe_set_vf_lpe(dev, vf, msgbuf);
break;
case IXGBE_VF_SET_VLAN:
- retval = ixgbe_vf_set_vlan(dev, vf, msgbuf);
+ if (retval == RTE_PMD_IXGBE_MB_EVENT_PROCEED)
+ retval = ixgbe_vf_set_vlan(dev, vf, msgbuf);
break;
case IXGBE_VF_API_NEGOTIATE:
retval = ixgbe_negotiate_vf_api(dev, vf, msgbuf);
@@ -704,7 +733,8 @@ ixgbe_rcv_msg_from_vf(struct rte_eth_dev *dev, uint16_t vf)
msg_size = IXGBE_VF_GET_QUEUE_MSG_SIZE;
break;
case IXGBE_VF_UPDATE_XCAST_MODE:
- retval = ixgbe_set_vf_mc_promisc(dev, vf, msgbuf);
+ if (retval == RTE_PMD_IXGBE_MB_EVENT_PROCEED)
+ retval = ixgbe_set_vf_mc_promisc(dev, vf, msgbuf);
break;
default:
PMD_DRV_LOG(DEBUG, "Unhandled Msg %8.8x", (unsigned)msgbuf[0]);
diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.h b/drivers/net/ixgbe/rte_pmd_ixgbe.h
index 33b5b2d..2f6cf46 100644
--- a/drivers/net/ixgbe/rte_pmd_ixgbe.h
+++ b/drivers/net/ixgbe/rte_pmd_ixgbe.h
@@ -181,4 +181,21 @@ int rte_pmd_ixgbe_set_vf_split_drop_en(uint8_t port, uint16_t vf, uint8_t on);
*/
int
rte_pmd_ixgbe_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on);
+
+/**
+ * Response sent back to ixgbe driver from user app after callback
+ */
+enum rte_pmd_ixgbe_mb_event_rsp {
+ RTE_PMD_IXGBE_MB_EVENT_NOOP_ACK, /**< skip mbox request and ACK */
+ RTE_PMD_IXGBE_MB_EVENT_NOOP_NACK, /**< skip mbox request and NACK */
+ RTE_PMD_IXGBE_MB_EVENT_PROCEED, /**< proceed with mbox request */
+ RTE_PMD_IXGBE_MB_EVENT_MAX /**< max value of this enum */
+};
+
+struct rte_pmd_ixgbe_mb_event_param {
+ uint16_t vfid;
+ uint16_t msg_type;
+ uint16_t retval;
+ void *userdata;
+};
#endif /* _PMD_IXGBE_H_ */
--
2.9.0
^ permalink raw reply related
* Getting corrupted ESP packet
From: Pankaj Joshi @ 2016-10-04 16:03 UTC (permalink / raw)
To: qat-linux, dev
Hello All,
I am using QAT library for data encryption ( for coletocreek card).
I am sending 98 byte ICMP data to the hardware, at successful time it is
returning 166 byte of data as ESP packet.
But sometimes it is returning through callback function 180 byte of data ,
which is corrupted one .
Can anyone tell, how I can resolve this issue and why it is happening when
I am sending same data to the hardware.
Regards,
Pankaj Joshi
^ permalink raw reply
* [PATCH] dpdk-procinfo: free allocated xstats memory upon failure
From: Reshma Pattan @ 2016-10-04 16:42 UTC (permalink / raw)
To: dev; +Cc: Reshma Pattan
Some of the failures cases inside the nic_xstats_display()
function doesn't free the allocated memory for the xstats and
their names, memory is freed now.
Fixes: e2aae1c1 ("ethdev: remove name from extended statistic fetch")
Fixes: 22561383 ("app: replace dump_cfg by proc_info")
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
---
app/proc_info/main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/app/proc_info/main.c b/app/proc_info/main.c
index 8246fb2..2c56d10 100644
--- a/app/proc_info/main.c
+++ b/app/proc_info/main.c
@@ -268,7 +268,7 @@ nic_xstats_display(uint8_t port_id)
if (len != rte_eth_xstats_get_names(
port_id, xstats_names, len)) {
printf("Cannot get xstat names\n");
- return;
+ goto err;
}
printf("###### NIC extended statistics for port %-2d #########\n",
@@ -278,8 +278,7 @@ nic_xstats_display(uint8_t port_id)
ret = rte_eth_xstats_get(port_id, xstats, len);
if (ret < 0 || ret > len) {
printf("Cannot get xstats\n");
- free(xstats);
- return;
+ goto err;
}
for (i = 0; i < len; i++)
@@ -289,6 +288,7 @@ nic_xstats_display(uint8_t port_id)
printf("%s############################\n",
nic_stats_border);
+err:
free(xstats);
free(xstats_names);
}
--
2.7.4
^ permalink raw reply related
* Re: [PATCH 1/1] eal: Don't fail secondary if primary is missing tailqs
From: Jean Tourrilhes @ 2016-10-04 16:59 UTC (permalink / raw)
To: Sergio Gonzalez Monroy; +Cc: dev, David Marchand
In-Reply-To: <20493efb-6822-0847-3685-819c769e5ad2@intel.com>
On Tue, Oct 04, 2016 at 02:11:39PM +0100, Sergio Gonzalez Monroy wrote:
> Hi Jean,
>
> As with your other patch, commit title needs fixing and also missing
> Signed-off-by line.
I'll do that, no worries...
> I might be missing something here so bear with me.
Yes, I know I was terse. Sorry.
> The case you are trying to fix is, as an example, when your secondary app is
> using LPM but your primary is not.
> So basically with this patch, you are removing the tailq for LPM on
> secondary and continuing as normal, is that the case?
The secondary can't use tailq types that the primary does not
have, because they are shared across the shared memory.
What happens is that the primary and secondary did not compile
in the same list of tailq. See previous e-mail :
http://dpdk.org/ml/archives/dev/2016-September/047329.html
The reason it's happening is that the secondary was not
compiled with the DPDK build system, but with the build system of the
application (in this case, Snort). Oubviously, porting the application
to the DPDK build system is not practical, so we need to live with
this case.
The build system of the application does not have all the
subtelties of the DPDK build system, and ends up including *all* the
constructors, wether they are used or not in the code. Moreover, they
are included in a different order. Actually, by default the builds
include no constructors at all (which is a big fail), so the library
needs to be included with --whole-archive (see Snort DPDK
instructions).
> I am not convinced about this approach.
I agree that the whole constructor approach is flaky and my
patch is only a band aid. Constructors should be entirely removed
IMHO, and a more deterministic init method should be used instead of
depending on linker magic.
Note that the other constructors happen to work right in my
case, but that's probably pure luck. The list of mempool constructors
happen to be the same and in the same order (order matters for mempool
constructors). The app is not using spinlock, hash, crc and acl, so
I did not look if the lists did match.
> I guess the assumption here is that all the TAILQ infrastructure works even
> when the tailq list itself is NULL?
If tailq are not used in the primary, I assume it would work.
> I say assumption because I don't have an easy way to trigger this use case
> with default DPDK sample/test apps.
I know. I'll see what I can do to release the code.
> What about letting the secondary process create a tailq if it doesn't
> exists?
Primary owns the shared memory, and I don't see how primary
could handle an unknown tailq. Secondary can't do much without
primary. So, I don't see how adding the missing tailqs helps.
> We would need to lock protect at least the register function to avoid race
> conditions when having multiple secondary processes.
>
> David, what do you think?
>
> Sergio
Regards,
Jean
^ permalink raw reply
* [PATCH v2 1/3] mem: fix hugepage mapping error messages
From: Jean Tourrilhes @ 2016-10-04 17:17 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: Sergio Gonzalez Monroy, dev
In-Reply-To: <2392264.CCbfKQ6uGK@xps13>
Running secondary is tricky due to the need to map the memory region
at the right place in VM, which is whatever primary has chosen. If the
base address for primary happens to by already mapped in the
secondary, we will hit precisely these error messages (depending if we
fail on the config region or the hugepages). This is why there is
already a comment about ASLR.
The issue is that in most cases, remapping does not happen and "errno"
is not changed and therefore stale. In our case, we got a "permission
denied", which sent us down the wrong track. It's such a common error
for secondary that I feel this error message should be unambiguous and
helpful.
The call to close was also moved because close() may override errno.
Signed-off-by: Jean Tourrilhes <jt@labs.hpe.com>
---
lib/librte_eal/linuxapp/eal/eal.c | 14 +++++++++++---
lib/librte_eal/linuxapp/eal/eal_memory.c | 16 ++++++++++++----
2 files changed, 23 insertions(+), 7 deletions(-)
diff --git a/lib/librte_eal/linuxapp/eal/eal.c b/lib/librte_eal/linuxapp/eal/eal.c
index 3fb2188..5df9f6a 100644
--- a/lib/librte_eal/linuxapp/eal/eal.c
+++ b/lib/librte_eal/linuxapp/eal/eal.c
@@ -238,7 +238,8 @@ rte_eal_config_attach(void)
mem_config = (struct rte_mem_config *) mmap(NULL, sizeof(*mem_config),
PROT_READ, MAP_SHARED, mem_cfg_fd, 0);
if (mem_config == MAP_FAILED)
- rte_panic("Cannot mmap memory for rte_config\n");
+ rte_panic("Cannot mmap memory for rte_config! error %i (%s)\n",
+ errno, strerror(errno));
rte_config.mem_config = mem_config;
}
@@ -263,9 +264,16 @@ rte_eal_config_reattach(void)
mem_config = (struct rte_mem_config *) mmap(rte_mem_cfg_addr,
sizeof(*mem_config), PROT_READ | PROT_WRITE, MAP_SHARED,
mem_cfg_fd, 0);
+ if (mem_config == MAP_FAILED || mem_config != rte_mem_cfg_addr) {
+ if (mem_config != MAP_FAILED)
+ /* errno is stale, don't use */
+ rte_panic("Cannot mmap memory for rte_config at [%p], got [%p] - please use '--base-virtaddr' option\n",
+ rte_mem_cfg_addr, mem_config);
+ else
+ rte_panic("Cannot mmap memory for rte_config! error %i (%s)\n",
+ errno, strerror(errno));
+ }
close(mem_cfg_fd);
- if (mem_config == MAP_FAILED || mem_config != rte_mem_cfg_addr)
- rte_panic("Cannot mmap memory for rte_config\n");
rte_config.mem_config = mem_config;
}
diff --git a/lib/librte_eal/linuxapp/eal/eal_memory.c b/lib/librte_eal/linuxapp/eal/eal_memory.c
index 41e0a92..b036ffc 100644
--- a/lib/librte_eal/linuxapp/eal/eal_memory.c
+++ b/lib/librte_eal/linuxapp/eal/eal_memory.c
@@ -1615,10 +1615,18 @@ rte_eal_hugepage_attach(void)
PROT_READ, MAP_PRIVATE, fd_zero, 0);
if (base_addr == MAP_FAILED ||
base_addr != mcfg->memseg[s].addr) {
- RTE_LOG(ERR, EAL, "Could not mmap %llu bytes "
- "in /dev/zero to requested address [%p]: '%s'\n",
- (unsigned long long)mcfg->memseg[s].len,
- mcfg->memseg[s].addr, strerror(errno));
+ if (base_addr != MAP_FAILED)
+ /* errno is stale, don't use */
+ RTE_LOG(ERR, EAL, "Could not mmap %llu bytes "
+ "in /dev/zero at [%p], got [%p] - "
+ "please use '--base-virtaddr' option\n",
+ (unsigned long long)mcfg->memseg[s].len,
+ mcfg->memseg[s].addr, base_addr);
+ else
+ RTE_LOG(ERR, EAL, "Could not mmap %llu bytes "
+ "in /dev/zero at [%p]: '%s'\n",
+ (unsigned long long)mcfg->memseg[s].len,
+ mcfg->memseg[s].addr, strerror(errno));
if (aslr_enabled() > 0) {
RTE_LOG(ERR, EAL, "It is recommended to "
"disable ASLR in the kernel "
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox