* [PATCH v2 05/30] net/ixgbe/base: clean up X557 link status check
From: Wei Dai @ 2016-12-21 9:47 UTC (permalink / raw)
To: dev; +Cc: helin.zhang, konstantin.ananyev, Wei Dai
In-Reply-To: <1482313694-31602-1-git-send-email-wei.dai@intel.com>
This patch cleans up the code and clarifies the comment around
the X557 PHY link status check in ixgbe_check_link_t_x550em().
Signed-off-by: Wei Dai <wei.dai@intel.com>
---
drivers/net/ixgbe/base/ixgbe_x550.c | 25 +++++++++++--------------
1 file changed, 11 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c
index f5143f9..69aa9d5 100644
--- a/drivers/net/ixgbe/base/ixgbe_x550.c
+++ b/drivers/net/ixgbe/base/ixgbe_x550.c
@@ -4660,7 +4660,7 @@ s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
bool *link_up, bool link_up_wait_to_complete)
{
u32 status;
- u16 autoneg_status;
+ u16 i, autoneg_status = 0;
if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
return IXGBE_ERR_CONFIG;
@@ -4673,21 +4673,18 @@ s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
return status;
/* MAC link is up, so check external PHY link.
- * Read this twice back to back to indicate current status.
+ * X557 PHY. Link status is latching low, and can only be used to detect
+ * link drop, and not the current status of the link without performing
+ * back-to-back reads.
*/
- status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- &autoneg_status);
-
- if (status != IXGBE_SUCCESS)
- return status;
-
- status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- &autoneg_status);
+ for (i = 0; i < 2; i++) {
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_status);
- if (status != IXGBE_SUCCESS)
- return status;
+ if (status != IXGBE_SUCCESS)
+ return status;
+ }
/* If external PHY link is not up, then indicate link not up */
if (!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS))
--
2.7.4
^ permalink raw reply related
* [PATCH v2 03/30] net/ixgbe/base: use fast MDIO for non-10G devices
From: Wei Dai @ 2016-12-21 9:47 UTC (permalink / raw)
To: dev; +Cc: helin.zhang, konstantin.ananyev, Wei Dai
In-Reply-To: <1482313694-31602-1-git-send-email-wei.dai@intel.com>
Devices that cannot go 10G speeds can safely select a faster
Management Data Input/Output (MDIO) speed.
Select fast MDIO clock speed for for those devices.
Signed-off-by: Wei Dai <wei.dai@intel.com>
---
drivers/net/ixgbe/base/ixgbe_x550.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c
index acb8140..c1fac1a 100644
--- a/drivers/net/ixgbe/base/ixgbe_x550.c
+++ b/drivers/net/ixgbe/base/ixgbe_x550.c
@@ -2549,8 +2549,6 @@ STATIC void ixgbe_set_mdio_speed(struct ixgbe_hw *hw)
case IXGBE_DEV_ID_X550EM_X_10G_T:
case IXGBE_DEV_ID_X550EM_A_SGMII:
case IXGBE_DEV_ID_X550EM_A_SGMII_L:
- case IXGBE_DEV_ID_X550EM_A_1G_T:
- case IXGBE_DEV_ID_X550EM_A_1G_T_L:
case IXGBE_DEV_ID_X550EM_A_10G_T:
case IXGBE_DEV_ID_X550EM_A_SFP:
case IXGBE_DEV_ID_X550EM_A_QSFP:
@@ -2559,6 +2557,13 @@ STATIC void ixgbe_set_mdio_speed(struct ixgbe_hw *hw)
hlreg0 &= ~IXGBE_HLREG0_MDCSPD;
IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
break;
+ case IXGBE_DEV_ID_X550EM_A_1G_T:
+ case IXGBE_DEV_ID_X550EM_A_1G_T_L:
+ /* Select fast MDIO clock speed for these devices */
+ hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
+ hlreg0 |= IXGBE_HLREG0_MDCSPD;
+ IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
+ break;
default:
break;
}
--
2.7.4
^ permalink raw reply related
* [PATCH v2 00/30] update ixgbe shared code to version 16.11.21
From: Wei Dai @ 2016-12-21 9:47 UTC (permalink / raw)
To: dev; +Cc: helin.zhang, konstantin.ananyev, Wei Dai
update ixgbe shared code to version 16.11.21 .
v2 changes:
modify subject line and message body of git log according to
feedbacks from communtiy.
split the 24th patch into 2 separate ones.
the 24th of v1 is net/ixgbe/base: add EEE support for DNL-controlled PHYs
the 24th of v2 is net/ixgbe/base: add EEE support for some PHYs
the 25th of v2 is net/ixgbe/base: remove unused enum type
correct RAEDME
Wei Dai (30):
net/ixgbe/base: fix PHY reset check for x550em-ext
net/ixgbe/base: fix clearing SAN MAC address
net/ixgbe/base: use fast MDIO for non-10G devices
net/ixgbe/base: fix PHY identification for x550a
net/ixgbe/base: clean up X557 link status check
net/ixgbe/base: add driver version to firmware
net/ixgbe/base: store link active LED
net/ixgbe/base: cleanup X540 checksum calculation
net/ixgbe/base: enable LASI only for X552 devices
net/ixgbe/base: limit iXFI setup to X552 devices
net/ixgbe/base: fix getting PHY type for some x550 devices
net/ixgbe/base: fix SGMII link setup for M88 PHYs
net/ixgbe/base: cleanup dead EEE code
net/ixgbe/base: fix setting unsupported autoneg speeds
net/ixgbe/base: support FW commands to control some PHYs
net/ixgbe/base: use FW commands to control some PHYs
net/ixgbe/base: support busy SGMII register reads
net/ixgbe/base: include new speeds in VFLINK interpretation
net/ixgbe/base: limit 5Gb support to X550 devices
net/ixgbe/base: add physical layer options for FW PHY type
net/ixgbe/base: remove unneeded MAC type check
net/ixgbe/base: remove unused PHY ID
net/ixgbe/base: update FW PHY flow control
net/ixgbe/base: add EEE support for some PHYs
net/ixgbe/base: remove unused enum type
net/ixgbe/base: fix IXGBE LSWFW register
net/ixgbe/base: remove unused EEE code
net/ixgbe/base: add write flush required by Inphi PHY
net/ixgbe/base: report physical layer for SGMII PHY type
net/ixgbe/base: update shared code version to 2016.11.21
drivers/net/ixgbe/Makefile | 1 +
drivers/net/ixgbe/base/README | 3 +-
drivers/net/ixgbe/base/ixgbe_api.c | 7 +-
drivers/net/ixgbe/base/ixgbe_api.h | 2 +-
drivers/net/ixgbe/base/ixgbe_common.c | 54 +-
drivers/net/ixgbe/base/ixgbe_common.h | 7 +-
drivers/net/ixgbe/base/ixgbe_hv_vf.c | 240 +++++++++
drivers/net/ixgbe/base/ixgbe_hv_vf.h | 41 ++
drivers/net/ixgbe/base/ixgbe_osdep.h | 4 +-
drivers/net/ixgbe/base/ixgbe_phy.c | 168 +++---
drivers/net/ixgbe/base/ixgbe_phy.h | 72 +--
drivers/net/ixgbe/base/ixgbe_type.h | 104 +++-
drivers/net/ixgbe/base/ixgbe_vf.c | 16 +
drivers/net/ixgbe/base/ixgbe_vf.h | 3 +
drivers/net/ixgbe/base/ixgbe_x540.c | 10 +-
drivers/net/ixgbe/base/ixgbe_x550.c | 977 +++++++++++++++-------------------
drivers/net/ixgbe/base/ixgbe_x550.h | 4 +-
17 files changed, 977 insertions(+), 736 deletions(-)
create mode 100644 drivers/net/ixgbe/base/ixgbe_hv_vf.c
create mode 100644 drivers/net/ixgbe/base/ixgbe_hv_vf.h
--
2.7.4
^ permalink raw reply
* Re: [PATCH v3 7/9] ethdev: Move filling of rte_eth_dev_info->pci_dev to dev_infos_get()
From: Shreyansh Jain @ 2016-12-21 9:54 UTC (permalink / raw)
To: Jan Blunck; +Cc: dev, david.marchand, stephen
In-Reply-To: <1482232315-21626-8-git-send-email-jblunck@infradead.org>
On Tuesday 20 December 2016 04:41 PM, Jan Blunck wrote:
> Only the device itself can decide its PCI or not.
>
> Signed-off-by: Jan Blunck <jblunck@infradead.org>
> ---
> drivers/net/bnx2x/bnx2x_ethdev.c | 1 +
> drivers/net/bnxt/bnxt_ethdev.c | 2 ++
> drivers/net/cxgbe/cxgbe_ethdev.c | 2 ++
> drivers/net/e1000/em_ethdev.c | 1 +
> drivers/net/e1000/igb_ethdev.c | 2 ++
> drivers/net/ena/ena_ethdev.c | 2 ++
> drivers/net/enic/enic_ethdev.c | 1 +
> drivers/net/fm10k/fm10k_ethdev.c | 1 +
> drivers/net/i40e/i40e_ethdev.c | 1 +
> drivers/net/i40e/i40e_ethdev_vf.c | 1 +
> drivers/net/ixgbe/ixgbe_ethdev.c | 2 ++
> drivers/net/mlx4/mlx4.c | 2 ++
> drivers/net/mlx5/mlx5_ethdev.c | 2 ++
> drivers/net/nfp/nfp_net.c | 1 +
> drivers/net/qede/qede_ethdev.c | 1 +
> drivers/net/szedata2/rte_eth_szedata2.c | 1 +
> drivers/net/thunderx/nicvf_ethdev.c | 2 ++
> drivers/net/virtio/virtio_ethdev.c | 1 +
> drivers/net/vmxnet3/vmxnet3_ethdev.c | 2 ++
> lib/librte_ether/rte_ethdev.c | 1 -
> 20 files changed, 28 insertions(+), 1 deletion(-)
>
<snip>
> diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
> index f17da46..c88b7bf 100644
> --- a/drivers/net/ixgbe/ixgbe_ethdev.c
> +++ b/drivers/net/ixgbe/ixgbe_ethdev.c
> @@ -3043,6 +3043,7 @@ ixgbe_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
> struct rte_eth_conf *dev_conf = &dev->data->dev_conf;
> struct rte_pci_device *pci_dev = ETH_DEV_PCI_DEV(dev);
>
> + dev_info->pci_dev = ETH_DEV_PCI_DEV(dev);
> dev_info->max_rx_queues = (uint16_t)hw->mac.max_rx_queues;
> dev_info->max_tx_queues = (uint16_t)hw->mac.max_tx_queues;
> if (RTE_ETH_DEV_SRIOV(dev).active == 0) {
> @@ -3175,6 +3176,7 @@ ixgbevf_dev_info_get(struct rte_eth_dev *dev,
> struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> struct rte_pci_device *pci_dev = ETH_DEV_PCI_DEV(dev);
>
> + dev_info->pci_dev = ETH_DEV_PCI_DEV(dev);
> dev_info->max_rx_queues = (uint16_t)hw->mac.max_rx_queues;
> dev_info->max_tx_queues = (uint16_t)hw->mac.max_tx_queues;
> dev_info->min_rx_bufsize = 1024; /* cf BSIZEPACKET in SRRCTL reg */
> diff --git a/drivers/net/mlx4/mlx4.c b/drivers/net/mlx4/mlx4.c
> index da61a85..5455fea 100644
> --- a/drivers/net/mlx4/mlx4.c
> +++ b/drivers/net/mlx4/mlx4.c
> @@ -4421,6 +4421,8 @@ mlx4_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
> unsigned int max;
> char ifname[IF_NAMESIZE];
>
> + info->pci_dev = ETH_DEV_PCI_DEV(dev);
> +
My compilation environment is reporting following error:
--->8---
/home/shreyansh/build/DPDK/01_dpdk/drivers/net/mlx4/mlx4.c: In function
‘mlx4_pci_probe’:
/home/shreyansh/build/DPDK/01_dpdk/drivers/net/mlx4/mlx4.c:5843:10:
error: ‘struct rte_eth_dev’ has no member named ‘pci_dev’
eth_dev->pci_dev = pci_dev;
^
/home/shreyansh/build/DPDK/01_dpdk/mk/internal/rte.compile-pre.mk:138:
recipe for target 'mlx4.o' failed
--->8---
Exact same issue exists on MLX5 also I think:
1d [shreyansh:~/build/DPDK/01_dpdk]
tmp/jan_patches_ethdev_21dec(+11/-11)+* ± grep "eth_dev->pci_dev" * -rn
drivers/net/mlx5/mlx5.c:660: eth_dev->pci_dev = pci_dev;
drivers/net/mlx4/mlx4.c:5843: eth_dev->pci_dev = pci_dev;
(I don't yet have MLX5 compilation env - so, above is just my guess).
> if (priv == NULL)
> return;
> priv_lock(priv);
> diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
> index c0f73e9..489a4f6 100644
> --- a/drivers/net/mlx5/mlx5_ethdev.c
> +++ b/drivers/net/mlx5/mlx5_ethdev.c
> @@ -562,6 +562,8 @@ mlx5_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
> unsigned int max;
> char ifname[IF_NAMESIZE];
>
> + info->pci_dev = ETH_DEV_PCI_DEV(dev);
> +
> priv_lock(priv);
> /* FIXME: we should ask the device for these values. */
> info->min_rx_bufsize = 32;
<Snip>
-
Shreyansh
^ permalink raw reply
* [PATCH v2 26/30] net/ixgbe/base: fix IXGBE LSWFW register
From: Wei Dai @ 2016-12-21 9:48 UTC (permalink / raw)
To: dev; +Cc: helin.zhang, konstantin.ananyev, Wei Dai, stable
In-Reply-To: <1482313694-31602-1-git-send-email-wei.dai@intel.com>
This register was incorrect when compared to the data sheet.
Even though the driver doesn't currently use this register,
it is better to fix it upstream.
Fixes: af75078fece3 ("first public release")
CC: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
---
drivers/net/ixgbe/base/ixgbe_type.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ixgbe/base/ixgbe_type.h b/drivers/net/ixgbe/base/ixgbe_type.h
index f1761a3..b609f6e 100644
--- a/drivers/net/ixgbe/base/ixgbe_type.h
+++ b/drivers/net/ixgbe/base/ixgbe_type.h
@@ -1045,7 +1045,7 @@ struct ixgbe_dmac_config {
#define IXGBE_FTFT 0x09400 /* 0x9400-0x97FC */
#define IXGBE_METF(_i) (0x05190 + ((_i) * 4)) /* 4 of these (0-3) */
#define IXGBE_MDEF_EXT(_i) (0x05160 + ((_i) * 4)) /* 8 of these (0-7) */
-#define IXGBE_LSWFW 0x15014
+#define IXGBE_LSWFW 0x15F14
#define IXGBE_BMCIP(_i) (0x05050 + ((_i) * 4)) /* 0x5050-0x505C */
#define IXGBE_BMCIPVAL 0x05060
#define IXGBE_BMCIP_IPADDR_TYPE 0x00000001
--
2.7.4
^ permalink raw reply related
* [PATCH v2 14/30] net/ixgbe/base: fix setting unsupported autoneg speeds
From: Wei Dai @ 2016-12-21 9:47 UTC (permalink / raw)
To: dev; +Cc: helin.zhang, konstantin.ananyev, Wei Dai, stable
In-Reply-To: <1482313694-31602-1-git-send-email-wei.dai@intel.com>
Update ixgbe_setup_phy_link_generic that set/unset auto-negotiation.
Ensure that unsupported auto-negotiation speeds are unset.
This is necessary since the PHY NVM may advertise unsupported speeds.
Fixes: af75078fece3 ("first public release")
CC: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
---
drivers/net/ixgbe/base/ixgbe_phy.c | 130 +++++++++++++++----------------------
1 file changed, 51 insertions(+), 79 deletions(-)
diff --git a/drivers/net/ixgbe/base/ixgbe_phy.c b/drivers/net/ixgbe/base/ixgbe_phy.c
index 1d9fb3e..54e45b2 100644
--- a/drivers/net/ixgbe/base/ixgbe_phy.c
+++ b/drivers/net/ixgbe/base/ixgbe_phy.c
@@ -787,91 +787,63 @@ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg);
- if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
- /* Set or unset auto-negotiation 10G advertisement */
- hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- &autoneg_reg);
-
- autoneg_reg &= ~IXGBE_MII_10GBASE_T_ADVERTISE;
- if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
- autoneg_reg |= IXGBE_MII_10GBASE_T_ADVERTISE;
-
- hw->phy.ops.write_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- autoneg_reg);
- }
-
- if (hw->mac.type == ixgbe_mac_X550) {
- if (speed & IXGBE_LINK_SPEED_5GB_FULL) {
- /* Set or unset auto-negotiation 5G advertisement */
- hw->phy.ops.read_reg(hw,
- IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- &autoneg_reg);
-
- autoneg_reg &= ~IXGBE_MII_5GBASE_T_ADVERTISE;
- if (hw->phy.autoneg_advertised &
- IXGBE_LINK_SPEED_5GB_FULL)
- autoneg_reg |= IXGBE_MII_5GBASE_T_ADVERTISE;
-
- hw->phy.ops.write_reg(hw,
- IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- autoneg_reg);
- }
+ /* Set or unset auto-negotiation 10G advertisement */
+ hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
- if (speed & IXGBE_LINK_SPEED_2_5GB_FULL) {
- /* Set or unset auto-negotiation 2.5G advertisement */
- hw->phy.ops.read_reg(hw,
- IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- &autoneg_reg);
-
- autoneg_reg &= ~IXGBE_MII_2_5GBASE_T_ADVERTISE;
- if (hw->phy.autoneg_advertised &
- IXGBE_LINK_SPEED_2_5GB_FULL)
- autoneg_reg |= IXGBE_MII_2_5GBASE_T_ADVERTISE;
-
- hw->phy.ops.write_reg(hw,
- IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- autoneg_reg);
- }
- }
+ autoneg_reg &= ~IXGBE_MII_10GBASE_T_ADVERTISE;
+ if ((hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) &&
+ (speed & IXGBE_LINK_SPEED_10GB_FULL))
+ autoneg_reg |= IXGBE_MII_10GBASE_T_ADVERTISE;
- if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
- /* Set or unset auto-negotiation 1G advertisement */
- hw->phy.ops.read_reg(hw,
- IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- &autoneg_reg);
+ hw->phy.ops.write_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
- autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE;
- if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
- autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE;
+ hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
- hw->phy.ops.write_reg(hw,
- IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- autoneg_reg);
+ if (hw->mac.type == ixgbe_mac_X550) {
+ /* Set or unset auto-negotiation 5G advertisement */
+ autoneg_reg &= ~IXGBE_MII_5GBASE_T_ADVERTISE;
+ if ((hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_5GB_FULL) &&
+ (speed & IXGBE_LINK_SPEED_5GB_FULL))
+ autoneg_reg |= IXGBE_MII_5GBASE_T_ADVERTISE;
+
+ /* Set or unset auto-negotiation 2.5G advertisement */
+ autoneg_reg &= ~IXGBE_MII_2_5GBASE_T_ADVERTISE;
+ if ((hw->phy.autoneg_advertised &
+ IXGBE_LINK_SPEED_2_5GB_FULL) &&
+ (speed & IXGBE_LINK_SPEED_2_5GB_FULL))
+ autoneg_reg |= IXGBE_MII_2_5GBASE_T_ADVERTISE;
}
- if (speed & IXGBE_LINK_SPEED_100_FULL) {
- /* Set or unset auto-negotiation 100M advertisement */
- hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- &autoneg_reg);
-
- autoneg_reg &= ~(IXGBE_MII_100BASE_T_ADVERTISE |
- IXGBE_MII_100BASE_T_ADVERTISE_HALF);
- if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
- autoneg_reg |= IXGBE_MII_100BASE_T_ADVERTISE;
-
- hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- autoneg_reg);
- }
+ /* Set or unset auto-negotiation 1G advertisement */
+ autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE;
+ if ((hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) &&
+ (speed & IXGBE_LINK_SPEED_1GB_FULL))
+ autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE;
+
+ hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
+
+ /* Set or unset auto-negotiation 100M advertisement */
+ hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ autoneg_reg &= ~(IXGBE_MII_100BASE_T_ADVERTISE |
+ IXGBE_MII_100BASE_T_ADVERTISE_HALF);
+ if ((hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL) &&
+ (speed & IXGBE_LINK_SPEED_100_FULL))
+ autoneg_reg |= IXGBE_MII_100BASE_T_ADVERTISE;
+
+ hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
/* Blocked by MNG FW so don't reset PHY */
if (ixgbe_check_reset_blocked(hw))
--
2.7.4
^ permalink raw reply related
* [PATCH v2 12/30] net/ixgbe/base: fix SGMII link setup for M88 PHYs
From: Wei Dai @ 2016-12-21 9:47 UTC (permalink / raw)
To: dev; +Cc: helin.zhang, konstantin.ananyev, Wei Dai, stable
In-Reply-To: <1482313694-31602-1-git-send-email-wei.dai@intel.com>
Fix ixgbe_setup_sgmii_m88 to set lane speed to autoneg instead of 1G
to prevent problems with link between PHYs
Fixes: d4b4c6845487 ("net/ixgbe/base: add X550em_a FW ALEF support")
CC: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
---
drivers/net/ixgbe/base/ixgbe_x550.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c
index d5dffdf..5cf9e40 100644
--- a/drivers/net/ixgbe/base/ixgbe_x550.c
+++ b/drivers/net/ixgbe/base/ixgbe_x550.c
@@ -1778,7 +1778,7 @@ STATIC s32 ixgbe_setup_sgmii_m88(struct ixgbe_hw *hw, ixgbe_link_speed speed,
return rc;
flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK;
- flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_1G;
+ flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_AN;
flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN;
flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN;
flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN;
--
2.7.4
^ permalink raw reply related
* [PATCH v2 11/30] net/ixgbe/base: fix getting PHY type for some x550 devices
From: Wei Dai @ 2016-12-21 9:47 UTC (permalink / raw)
To: dev; +Cc: helin.zhang, konstantin.ananyev, Wei Dai, stable
In-Reply-To: <1482313694-31602-1-git-send-email-wei.dai@intel.com>
Return correct physical layer for some x550 devices.
Fixes: 76d5b807ff74 ("ixgbe/base: new X557 phy")
Fixes: d2e72774e58c ("ixgbe/base: support X550")
CC: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
---
drivers/net/ixgbe/base/ixgbe_x550.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c
index a338a79..d5dffdf 100644
--- a/drivers/net/ixgbe/base/ixgbe_x550.c
+++ b/drivers/net/ixgbe/base/ixgbe_x550.c
@@ -3797,6 +3797,8 @@ u32 ixgbe_get_supported_physical_layer_X550em(struct ixgbe_hw *hw)
if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY)
physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
break;
+ case ixgbe_phy_m88:
+ physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T;
default:
break;
}
--
2.7.4
^ permalink raw reply related
* [PATCH v2 04/30] net/ixgbe/base: fix PHY identification for x550a
From: Wei Dai @ 2016-12-21 9:47 UTC (permalink / raw)
To: dev; +Cc: helin.zhang, konstantin.ananyev, Wei Dai, stable
In-Reply-To: <1482313694-31602-1-git-send-email-wei.dai@intel.com>
Method to identify the CS4223/CS4227 is incorrect and unreliable.
Provide a new register to differentiate between these PHY SKUs.
Fixes: fc0559bdb5e3 ("net/ixgbe/base: add link MAC setup for X550a SFP+")
CC: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
---
drivers/net/ixgbe/base/ixgbe_phy.h | 5 +++--
drivers/net/ixgbe/base/ixgbe_x550.c | 6 +++---
2 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ixgbe/base/ixgbe_phy.h b/drivers/net/ixgbe/base/ixgbe_phy.h
index da14abc..816de36 100644
--- a/drivers/net/ixgbe/base/ixgbe_phy.h
+++ b/drivers/net/ixgbe/base/ixgbe_phy.h
@@ -92,8 +92,9 @@ POSSIBILITY OF SUCH DAMAGE.
#define IXGBE_CS4227_GLOBAL_ID_MSB 1
#define IXGBE_CS4227_SCRATCH 2
#define IXGBE_CS4227_GLOBAL_ID_VALUE 0x03E5
-#define IXGBE_CS4223_PHY_ID 0x7003 /* Quad port */
-#define IXGBE_CS4227_PHY_ID 0x3003 /* Dual port */
+#define IXGBE_CS4227_EFUSE_PDF_SKU 0x19F
+#define IXGBE_CS4223_SKU_ID 0x0010 /* Quad port */
+#define IXGBE_CS4227_SKU_ID 0x0014 /* Dual port */
#define IXGBE_CS4227_RESET_PENDING 0x1357
#define IXGBE_CS4227_RESET_COMPLETE 0x5AA5
#define IXGBE_CS4227_RETRIES 15
diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c
index c1fac1a..f5143f9 100644
--- a/drivers/net/ixgbe/base/ixgbe_x550.c
+++ b/drivers/net/ixgbe/base/ixgbe_x550.c
@@ -2927,8 +2927,8 @@ s32 ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw,
return IXGBE_ERR_PHY_ADDR_INVALID;
}
- /* Get external PHY device id */
- ret_val = hw->phy.ops.read_reg(hw, IXGBE_CS4227_GLOBAL_ID_MSB,
+ /* Get external PHY SKU id */
+ ret_val = hw->phy.ops.read_reg(hw, IXGBE_CS4227_EFUSE_PDF_SKU,
IXGBE_MDIO_ZERO_DEV_TYPE, ®_phy_ext);
if (ret_val != IXGBE_SUCCESS)
@@ -2937,7 +2937,7 @@ s32 ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw,
/* When configuring quad port CS4223, the MAC instance is part
* of the slice offset.
*/
- if (reg_phy_ext == IXGBE_CS4223_PHY_ID)
+ if (reg_phy_ext == IXGBE_CS4223_SKU_ID)
slice_offset = (hw->bus.lan_id +
(hw->bus.instance_id << 1)) << 12;
else
--
2.7.4
^ permalink raw reply related
* [PATCH v2 02/30] net/ixgbe/base: fix clearing SAN MAC address
From: Wei Dai @ 2016-12-21 9:47 UTC (permalink / raw)
To: dev; +Cc: helin.zhang, konstantin.ananyev, Wei Dai, stable
In-Reply-To: <1482313694-31602-1-git-send-email-wei.dai@intel.com>
Receive Address Register (RAR) entries, including SAN MAC address,
are cleared when VMDq pool bits are cleared.
Prevent SAN MAC address to be cleared.
Fixes: af75078fece3 ("first public release")
CC: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
---
drivers/net/ixgbe/base/ixgbe_common.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ixgbe/base/ixgbe_common.c b/drivers/net/ixgbe/base/ixgbe_common.c
index cca19ef..b2cc6fb 100644
--- a/drivers/net/ixgbe/base/ixgbe_common.c
+++ b/drivers/net/ixgbe/base/ixgbe_common.c
@@ -3764,7 +3764,8 @@ s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
}
/* was that the last pool using this rar? */
- if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0)
+ if (mpsar_lo == 0 && mpsar_hi == 0 &&
+ rar != 0 && rar != hw->mac.san_mac_rar_index)
hw->mac.ops.clear_rar(hw, rar);
done:
return IXGBE_SUCCESS;
--
2.7.4
^ permalink raw reply related
* [PATCH v2 01/30] net/ixgbe/base: fix PHY reset check for x550em-ext
From: Wei Dai @ 2016-12-21 9:47 UTC (permalink / raw)
To: dev; +Cc: helin.zhang, konstantin.ananyev, Wei Dai, stable
In-Reply-To: <1482313694-31602-1-git-send-email-wei.dai@intel.com>
PHY type ixgbe_phy_x550em_ext_t requires different check
to verify reset status.
Fixes: af75078fece3 ("first public release")
CC: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
---
drivers/net/ixgbe/base/ixgbe_phy.c | 29 ++++++++++++++++++++++++-----
1 file changed, 24 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ixgbe/base/ixgbe_phy.c b/drivers/net/ixgbe/base/ixgbe_phy.c
index 43c55d7..1d9fb3e 100644
--- a/drivers/net/ixgbe/base/ixgbe_phy.c
+++ b/drivers/net/ixgbe/base/ixgbe_phy.c
@@ -528,11 +528,30 @@ s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
*/
for (i = 0; i < 30; i++) {
msec_delay(100);
- hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
- IXGBE_MDIO_PHY_XS_DEV_TYPE, &ctrl);
- if (!(ctrl & IXGBE_MDIO_PHY_XS_RESET)) {
- usec_delay(2);
- break;
+ if (hw->phy.type == ixgbe_phy_x550em_ext_t) {
+ status = hw->phy.ops.read_reg(hw,
+ IXGBE_MDIO_TX_VENDOR_ALARMS_3,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ &ctrl);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ if (ctrl & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) {
+ usec_delay(2);
+ break;
+ }
+ } else {
+ status = hw->phy.ops.read_reg(hw,
+ IXGBE_MDIO_PHY_XS_CONTROL,
+ IXGBE_MDIO_PHY_XS_DEV_TYPE,
+ &ctrl);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ if (!(ctrl & IXGBE_MDIO_PHY_XS_RESET)) {
+ usec_delay(2);
+ break;
+ }
}
}
--
2.7.4
^ permalink raw reply related
* Re: [PATCH v3 3/9] drivers: Use ETH_DEV_PCI_DEV() helper
From: Shreyansh Jain @ 2016-12-21 9:50 UTC (permalink / raw)
To: Jan Blunck, dev; +Cc: david.marchand, stephen
In-Reply-To: <1482232315-21626-4-git-send-email-jblunck@infradead.org>
On Tuesday 20 December 2016 04:41 PM, Jan Blunck wrote:
> The drivers should not directly access the rte_eth_dev->pci_dev but use
> a macro instead. This is a preparation for replacing the pci_dev with
> a struct rte_device member in the future.
>
> Signed-off-by: Jan Blunck <jblunck@infradead.org>
> ---
> drivers/net/bnx2x/bnx2x_ethdev.c | 12 +++---
> drivers/net/bnxt/bnxt_ethdev.c | 19 ++++++----
> drivers/net/bnxt/bnxt_ring.c | 11 +++---
> drivers/net/cxgbe/cxgbe_ethdev.c | 2 +-
> drivers/net/e1000/em_ethdev.c | 20 ++++++----
> drivers/net/e1000/igb_ethdev.c | 50 ++++++++++++++-----------
> drivers/net/e1000/igb_pf.c | 3 +-
> drivers/net/ena/ena_ethdev.c | 2 +-
> drivers/net/enic/enic_ethdev.c | 2 +-
> drivers/net/fm10k/fm10k_ethdev.c | 49 +++++++++++++------------
> drivers/net/i40e/i40e_ethdev.c | 44 +++++++++++-----------
> drivers/net/i40e/i40e_ethdev.h | 4 ++
> drivers/net/i40e/i40e_ethdev_vf.c | 38 +++++++++----------
> drivers/net/ixgbe/ixgbe_ethdev.c | 65 ++++++++++++++++++++-------------
> drivers/net/ixgbe/ixgbe_pf.c | 2 +-
> drivers/net/nfp/nfp_net.c | 16 ++++----
> drivers/net/qede/qede_ethdev.c | 17 +++++----
> drivers/net/szedata2/rte_eth_szedata2.c | 27 +++++++-------
> drivers/net/szedata2/rte_eth_szedata2.h | 34 ++++++++---------
> drivers/net/thunderx/nicvf_ethdev.c | 5 ++-
> drivers/net/vmxnet3/vmxnet3_ethdev.c | 4 +-
> 21 files changed, 234 insertions(+), 192 deletions(-)
>
> diff --git a/drivers/net/bnx2x/bnx2x_ethdev.c b/drivers/net/bnx2x/bnx2x_ethdev.c
> index 0eae433..c331ccd 100644
> --- a/drivers/net/bnx2x/bnx2x_ethdev.c
> +++ b/drivers/net/bnx2x/bnx2x_ethdev.c
> @@ -124,7 +124,7 @@ bnx2x_interrupt_handler(__rte_unused struct rte_intr_handle *handle, void *param
> struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
>
> bnx2x_interrupt_action(dev);
> - rte_intr_enable(&(dev->pci_dev->intr_handle));
> + rte_intr_enable(&(ETH_DEV_PCI_DEV(dev)->intr_handle));
> }
>
> /*
> @@ -187,10 +187,10 @@ bnx2x_dev_start(struct rte_eth_dev *dev)
> }
>
> if (IS_PF(sc)) {
> - rte_intr_callback_register(&(dev->pci_dev->intr_handle),
> + rte_intr_callback_register(&sc->pci_dev->intr_handle,
> bnx2x_interrupt_handler, (void *)dev);
>
> - if(rte_intr_enable(&(dev->pci_dev->intr_handle)))
> + if (rte_intr_enable(&sc->pci_dev->intr_handle))
This changeset generates following error in my environment:
--->8---
/home/shreyansh/build/DPDK/01_dpdk/drivers/net/bnx2x/bnx2x_ethdev.c: In
function ‘bnx2x_dev_start’:
/home/shreyansh/build/DPDK/01_dpdk/drivers/net/bnx2x/bnx2x_ethdev.c:190:30:
error: passing argument 1 of ‘rte_intr_callback_register’ discards
‘const’ qualifier from pointer target type [-Werror=discarded-qualifiers]
rte_intr_callback_register(&sc->pci_dev->intr_handle,
^
In file included from
/home/shreyansh/build/DPDK/01_dpdk/x86_64-native-linuxapp-gcc/include/rte_pci.h:86:0,
from
/home/shreyansh/build/DPDK/01_dpdk/drivers/net/bnx2x/bnx2x_ethdev.h:34,
from
/home/shreyansh/build/DPDK/01_dpdk/drivers/net/bnx2x/bnx2x.h:34,
from
/home/shreyansh/build/DPDK/01_dpdk/drivers/net/bnx2x/bnx2x_ethdev.c:11:
/home/shreyansh/build/DPDK/01_dpdk/x86_64-native-linuxapp-gcc/include/rte_interrupts.h:73:5:
note: expected ‘struct rte_intr_handle *’ but argument is of type ‘const
struct rte_intr_handle *’
int rte_intr_callback_register(struct rte_intr_handle *intr_handle,
--->8---
Problem is that earlier 'eth_dev->pci_dev->intr_handle' was being passed
which was not a 'const'. But, the BNX2 local structure 'bnx2x_softc' has
a 'const struct rte_pci_device *' as member.
Maybe, following can help:
rte_intr_callback_register(Ð_DEV_PCI_DEV(dev),...);
> PMD_DRV_LOG(ERR, "rte_intr_enable failed");
> }
>
> @@ -215,8 +215,8 @@ bnx2x_dev_stop(struct rte_eth_dev *dev)
> PMD_INIT_FUNC_TRACE();
>
> if (IS_PF(sc)) {
> - rte_intr_disable(&(dev->pci_dev->intr_handle));
> - rte_intr_callback_unregister(&(dev->pci_dev->intr_handle),
> + rte_intr_disable(&sc->pci_dev->intr_handle);
> + rte_intr_callback_unregister(&sc->pci_dev->intr_handle,
Similar error here.
rte_intr_callback_unregister(&(ETH_DEV_PCI_DEV(dev)->intr_handle), ...)
solves it for me.
> bnx2x_interrupt_handler, (void *)dev);
> }
>
> @@ -516,7 +516,7 @@ bnx2x_common_dev_init(struct rte_eth_dev *eth_dev, int is_vf)
> PMD_INIT_FUNC_TRACE();
>
> eth_dev->dev_ops = is_vf ? &bnx2xvf_eth_dev_ops : &bnx2x_eth_dev_ops;
> - pci_dev = eth_dev->pci_dev;
> + pci_dev = ETH_DEV_PCI_DEV(eth_dev);
>
> rte_eth_copy_pci_info(eth_dev, pci_dev);
>
<snip>
-
Shreyansh
^ permalink raw reply
* [PATCH v6] vhost: allow for many vhost user ports
From: Yuanhan Liu @ 2016-12-21 9:45 UTC (permalink / raw)
To: dev; +Cc: Patrik Andersson, Jan Wickbom, Yuanhan Liu
In-Reply-To: <1481729401-27546-1-git-send-email-jan.wickbom@ericsson.com>
From: Jan Wickbom <jan.wickbom@ericsson.com>
Currently select() is used to monitor file descriptors for vhostuser
ports. This limits the number of ports possible to create since the
fd number is used as index in the fd_set and we have seen fds > 1023.
This patch changes select() to poll(). This way we can keep an
packed (pollfd) array for the fds, e.g. as many fds as the size of
the array.
Also see:
http://dpdk.org/ml/archives/dev/2016-April/037024.html
Reported-by: Patrik Andersson <patrik.r.andersson@ericsson.com>
Signed-off-by: Jan Wickbom <jan.wickbom@ericsson.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
---
For some reason, Jan won't be able to make v6, so I made it for
him.
v6:
* simplify fdset_shrink a bit
* minor cleanups
* don't touch fdset_init, which has nothing to do with this patchset,
yet this function will be removed in coming patch.
v5:
* pack of arrays moved after poll loop
v4:
* fdset_del can not shrink the array. Took care of that in sveral places
* Moved rwfds[] into struct fdset
v3:
* removed unnecessary include
* removed fdset_fill, made it functionally part of poll loop
v2:
* removed unnecessary casts
* static array replacing allocated memory
---
lib/librte_vhost/fd_man.c | 200 ++++++++++++++++++++++------------------------
lib/librte_vhost/fd_man.h | 2 +
2 files changed, 97 insertions(+), 105 deletions(-)
diff --git a/lib/librte_vhost/fd_man.c b/lib/librte_vhost/fd_man.c
index 2d3eeb7..8a075da 100644
--- a/lib/librte_vhost/fd_man.c
+++ b/lib/librte_vhost/fd_man.c
@@ -35,93 +35,91 @@
#include <stdio.h>
#include <stdlib.h>
#include <sys/socket.h>
-#include <sys/select.h>
#include <sys/time.h>
#include <sys/types.h>
#include <unistd.h>
+#include <string.h>
#include <rte_common.h>
#include <rte_log.h>
#include "fd_man.h"
-/**
- * Returns the index in the fdset for a given fd.
- * If fd is -1, it means to search for a free entry.
- * @return
- * index for the fd, or -1 if fd isn't in the fdset.
- */
+#define FDPOLLERR (POLLERR | POLLHUP | POLLNVAL)
+
static int
-fdset_find_fd(struct fdset *pfdset, int fd)
+get_last_valid_idx(struct fdset *pfdset, int last_valid_idx)
{
int i;
- if (pfdset == NULL)
- return -1;
-
- for (i = 0; i < MAX_FDS && pfdset->fd[i].fd != fd; i++)
+ for (i = last_valid_idx; i >= 0 && pfdset->fd[i].fd == -1; i--)
;
- return i == MAX_FDS ? -1 : i;
+ return i;
}
-static int
-fdset_find_free_slot(struct fdset *pfdset)
+static void
+fdset_move(struct fdset *pfdset, int dst, int src)
{
- return fdset_find_fd(pfdset, -1);
+ pfdset->fd[dst] = pfdset->fd[src];
+ pfdset->rwfds[dst] = pfdset->rwfds[src];
}
-static int
-fdset_add_fd(struct fdset *pfdset, int idx, int fd,
- fd_cb rcb, fd_cb wcb, void *dat)
+/*
+ * Find deleted fd entries and remove them
+ */
+static void
+fdset_shrink(struct fdset *pfdset)
{
- struct fdentry *pfdentry;
+ int i;
+ int last_valid_idx = get_last_valid_idx(pfdset, pfdset->num - 1);
- if (pfdset == NULL || idx >= MAX_FDS || fd >= FD_SETSIZE)
- return -1;
+ pthread_mutex_lock(&pfdset->fd_mutex);
- pfdentry = &pfdset->fd[idx];
- pfdentry->fd = fd;
- pfdentry->rcb = rcb;
- pfdentry->wcb = wcb;
- pfdentry->dat = dat;
+ for (i = 0; i < last_valid_idx; i++) {
+ if (pfdset->fd[i].fd != -1)
+ continue;
- return 0;
+ fdset_move(pfdset, i, last_valid_idx);
+ last_valid_idx = get_last_valid_idx(pfdset, last_valid_idx - 1);
+ }
+ pfdset->num = last_valid_idx + 1;
+
+ pthread_mutex_unlock(&pfdset->fd_mutex);
}
/**
- * Fill the read/write fd_set with the fds in the fdset.
+ * Returns the index in the fdset for a given fd.
* @return
- * the maximum fds filled in the read/write fd_set.
+ * index for the fd, or -1 if fd isn't in the fdset.
*/
static int
-fdset_fill(fd_set *rfset, fd_set *wfset, struct fdset *pfdset)
+fdset_find_fd(struct fdset *pfdset, int fd)
{
- struct fdentry *pfdentry;
- int i, maxfds = -1;
- int num = MAX_FDS;
+ int i;
- if (pfdset == NULL)
- return -1;
+ for (i = 0; i < pfdset->num && pfdset->fd[i].fd != fd; i++)
+ ;
- for (i = 0; i < num; i++) {
- pfdentry = &pfdset->fd[i];
- if (pfdentry->fd != -1) {
- int added = 0;
- if (pfdentry->rcb && rfset) {
- FD_SET(pfdentry->fd, rfset);
- added = 1;
- }
- if (pfdentry->wcb && wfset) {
- FD_SET(pfdentry->fd, wfset);
- added = 1;
- }
- if (added)
- maxfds = pfdentry->fd < maxfds ?
- maxfds : pfdentry->fd;
- }
- }
- return maxfds;
+ return i == pfdset->num ? -1 : i;
+}
+
+static void
+fdset_add_fd(struct fdset *pfdset, int idx, int fd,
+ fd_cb rcb, fd_cb wcb, void *dat)
+{
+ struct fdentry *pfdentry = &pfdset->fd[idx];
+ struct pollfd *pfd = &pfdset->rwfds[idx];
+
+ pfdentry->fd = fd;
+ pfdentry->rcb = rcb;
+ pfdentry->wcb = wcb;
+ pfdentry->dat = dat;
+
+ pfd->fd = fd;
+ pfd->events = rcb ? POLLIN : 0;
+ pfd->events |= wcb ? POLLOUT : 0;
+ pfd->revents = 0;
}
void
@@ -151,16 +149,13 @@
return -1;
pthread_mutex_lock(&pfdset->fd_mutex);
-
- /* Find a free slot in the list. */
- i = fdset_find_free_slot(pfdset);
- if (i == -1 || fdset_add_fd(pfdset, i, fd, rcb, wcb, dat) < 0) {
+ i = pfdset->num < MAX_FDS ? pfdset->num++ : -1;
+ if (i == -1) {
pthread_mutex_unlock(&pfdset->fd_mutex);
return -2;
}
- pfdset->num++;
-
+ fdset_add_fd(pfdset, i, fd, rcb, wcb, dat);
pthread_mutex_unlock(&pfdset->fd_mutex);
return 0;
@@ -189,7 +184,6 @@
pfdset->fd[i].fd = -1;
pfdset->fd[i].rcb = pfdset->fd[i].wcb = NULL;
pfdset->fd[i].dat = NULL;
- pfdset->num--;
i = -1;
}
pthread_mutex_unlock(&pfdset->fd_mutex);
@@ -198,24 +192,6 @@
return dat;
}
-/**
- * Unregister the fd at the specified slot from the fdset.
- */
-static void
-fdset_del_slot(struct fdset *pfdset, int index)
-{
- if (pfdset == NULL || index < 0 || index >= MAX_FDS)
- return;
-
- pthread_mutex_lock(&pfdset->fd_mutex);
-
- pfdset->fd[index].fd = -1;
- pfdset->fd[index].rcb = pfdset->fd[index].wcb = NULL;
- pfdset->fd[index].dat = NULL;
- pfdset->num--;
-
- pthread_mutex_unlock(&pfdset->fd_mutex);
-}
/**
* This functions runs in infinite blocking loop until there is no fd in
@@ -229,55 +205,64 @@
void
fdset_event_dispatch(struct fdset *pfdset)
{
- fd_set rfds, wfds;
- int i, maxfds;
+ int i;
+ struct pollfd *pfd;
struct fdentry *pfdentry;
- int num = MAX_FDS;
fd_cb rcb, wcb;
void *dat;
- int fd;
+ int fd, numfds;
int remove1, remove2;
- int ret;
+ int need_shrink;
if (pfdset == NULL)
return;
while (1) {
- struct timeval tv;
- tv.tv_sec = 1;
- tv.tv_usec = 0;
- FD_ZERO(&rfds);
- FD_ZERO(&wfds);
- pthread_mutex_lock(&pfdset->fd_mutex);
-
- maxfds = fdset_fill(&rfds, &wfds, pfdset);
-
- pthread_mutex_unlock(&pfdset->fd_mutex);
/*
- * When select is blocked, other threads might unregister
+ * When poll is blocked, other threads might unregister
* listenfds from and register new listenfds into fdset.
- * When select returns, the entries for listenfds in the fdset
+ * When poll returns, the entries for listenfds in the fdset
* might have been updated. It is ok if there is unwanted call
* for new listenfds.
*/
- ret = select(maxfds + 1, &rfds, &wfds, NULL, &tv);
- if (ret <= 0)
- continue;
+ pthread_mutex_lock(&pfdset->fd_mutex);
+ numfds = pfdset->num;
+ pthread_mutex_unlock(&pfdset->fd_mutex);
- for (i = 0; i < num; i++) {
- remove1 = remove2 = 0;
+ poll(pfdset->rwfds, numfds, 1000 /* millisecs */);
+
+ need_shrink = 0;
+ for (i = 0; i < numfds; i++) {
pthread_mutex_lock(&pfdset->fd_mutex);
+
pfdentry = &pfdset->fd[i];
fd = pfdentry->fd;
+ pfd = &pfdset->rwfds[i];
+
+ if (fd < 0) {
+ need_shrink = 1;
+ pthread_mutex_unlock(&pfdset->fd_mutex);
+ continue;
+ }
+
+ if (!pfd->revents) {
+ pthread_mutex_unlock(&pfdset->fd_mutex);
+ continue;
+ }
+
+ remove1 = remove2 = 0;
+
rcb = pfdentry->rcb;
wcb = pfdentry->wcb;
dat = pfdentry->dat;
pfdentry->busy = 1;
+
pthread_mutex_unlock(&pfdset->fd_mutex);
- if (fd >= 0 && FD_ISSET(fd, &rfds) && rcb)
+
+ if (rcb && pfd->revents & (POLLIN | FDPOLLERR))
rcb(fd, dat, &remove1);
- if (fd >= 0 && FD_ISSET(fd, &wfds) && wcb)
+ if (wcb && pfd->revents & (POLLOUT | FDPOLLERR))
wcb(fd, dat, &remove2);
pfdentry->busy = 0;
/*
@@ -292,8 +277,13 @@
* listen fd in another thread, we couldn't call
* fd_set_del.
*/
- if (remove1 || remove2)
- fdset_del_slot(pfdset, i);
+ if (remove1 || remove2) {
+ pfdentry->fd = -1;
+ need_shrink = 1;
+ }
}
+
+ if (need_shrink)
+ fdset_shrink(pfdset);
}
}
diff --git a/lib/librte_vhost/fd_man.h b/lib/librte_vhost/fd_man.h
index bd66ed1..d319cac 100644
--- a/lib/librte_vhost/fd_man.h
+++ b/lib/librte_vhost/fd_man.h
@@ -35,6 +35,7 @@
#define _FD_MAN_H_
#include <stdint.h>
#include <pthread.h>
+#include <poll.h>
#define MAX_FDS 1024
@@ -49,6 +50,7 @@ struct fdentry {
};
struct fdset {
+ struct pollfd rwfds[MAX_FDS];
struct fdentry fd[MAX_FDS];
pthread_mutex_t fd_mutex;
int num; /* current fd number of this fdset */
--
1.9.0
^ permalink raw reply related
* [PATCH v4 6/6] app/test: unit test case for eventdev APIs
From: Jerin Jacob @ 2016-12-21 9:25 UTC (permalink / raw)
To: dev
Cc: thomas.monjalon, bruce.richardson, hemant.agrawal, gage.eads,
harry.van.haaren, Jerin Jacob
In-Reply-To: <1482312326-2589-1-git-send-email-jerin.jacob@caviumnetworks.com>
This commit adds basic unit tests for the eventdev API.
commands to run the test app:
./build/app/test -c 2
RTE>>eventdev_common_autotest
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
---
MAINTAINERS | 1 +
app/test/Makefile | 2 +
app/test/test_eventdev.c | 778 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 781 insertions(+)
create mode 100644 app/test/test_eventdev.c
diff --git a/MAINTAINERS b/MAINTAINERS
index a10899f..21ff4db 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -252,6 +252,7 @@ F: examples/l2fwd-crypto/
Eventdev API - EXPERIMENTAL
M: Jerin Jacob <jerin.jacob@caviumnetworks.com>
F: lib/librte_eventdev/
+F: app/test/test_eventdev*
F: drivers/event/skeleton/
Networking Drivers
diff --git a/app/test/Makefile b/app/test/Makefile
index 8af39cb..3269270 100644
--- a/app/test/Makefile
+++ b/app/test/Makefile
@@ -198,6 +198,8 @@ SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev_blockcipher.c
SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev_perf.c
SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev.c
+SRCS-$(CONFIG_RTE_LIBRTE_EVENTDEV) += test_eventdev.c
+
SRCS-$(CONFIG_RTE_LIBRTE_KVARGS) += test_kvargs.c
CFLAGS += -O3
diff --git a/app/test/test_eventdev.c b/app/test/test_eventdev.c
new file mode 100644
index 0000000..042a446
--- /dev/null
+++ b/app/test/test_eventdev.c
@@ -0,0 +1,778 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 Cavium networks. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Cavium networks nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_common.h>
+#include <rte_hexdump.h>
+#include <rte_mbuf.h>
+#include <rte_malloc.h>
+#include <rte_memcpy.h>
+#include <rte_eventdev.h>
+#include <rte_cryptodev.h>
+
+#include "test.h"
+
+#define TEST_DEV_ID 0
+
+static int
+testsuite_setup(void)
+{
+ RTE_BUILD_BUG_ON(sizeof(struct rte_event) != 16);
+ uint8_t count;
+ count = rte_event_dev_count();
+ if (!count) {
+ printf("Failed to find a valid event device,"
+ " testing with event_skeleton device\n");
+ return rte_eal_vdev_init("event_skeleton", NULL);
+ }
+ return TEST_SUCCESS;
+}
+
+static void
+testsuite_teardown(void)
+{
+}
+
+static int
+test_eventdev_count(void)
+{
+ uint8_t count;
+ count = rte_event_dev_count();
+ TEST_ASSERT(count > 0, "Invalid eventdev count %" PRIu8, count);
+ return TEST_SUCCESS;
+}
+
+static int
+test_eventdev_get_dev_id(void)
+{
+ int ret;
+ ret = rte_event_dev_get_dev_id("not_a_valid_eventdev_driver");
+ TEST_ASSERT_FAIL(ret, "Expected <0 for invalid dev name ret=%d", ret);
+ return TEST_SUCCESS;
+}
+
+static int
+test_eventdev_socket_id(void)
+{
+ int socket_id;
+ socket_id = rte_event_dev_socket_id(TEST_DEV_ID);
+ TEST_ASSERT(socket_id != -EINVAL, "Failed to get socket_id %d",
+ socket_id);
+ socket_id = rte_event_dev_socket_id(RTE_EVENT_MAX_DEVS);
+ TEST_ASSERT(socket_id == -EINVAL, "Expected -EINVAL %d", socket_id);
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_eventdev_info_get(void)
+{
+ int ret;
+ struct rte_event_dev_info info;
+ ret = rte_event_dev_info_get(TEST_DEV_ID, NULL);
+ TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+ ret = rte_event_dev_info_get(TEST_DEV_ID, &info);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get event dev info");
+ TEST_ASSERT(info.max_event_ports > 0,
+ "Not enough event ports %d", info.max_event_ports);
+ TEST_ASSERT(info.max_event_queues > 0,
+ "Not enough event queues %d", info.max_event_queues);
+ return TEST_SUCCESS;
+}
+
+static inline void
+devconf_set_default_sane_values(struct rte_event_dev_config *dev_conf,
+ struct rte_event_dev_info *info)
+{
+ memset(dev_conf, 0, sizeof(struct rte_event_dev_config));
+ dev_conf->dequeue_timeout_ns = info->min_dequeue_timeout_ns;
+ dev_conf->nb_event_ports = info->max_event_ports;
+ dev_conf->nb_event_queues = info->max_event_queues;
+ dev_conf->nb_event_queue_flows = info->max_event_queue_flows;
+ dev_conf->nb_event_port_dequeue_depth =
+ info->max_event_port_dequeue_depth;
+ dev_conf->nb_event_port_enqueue_depth =
+ info->max_event_port_enqueue_depth;
+ dev_conf->nb_event_port_enqueue_depth =
+ info->max_event_port_enqueue_depth;
+ dev_conf->nb_events_limit =
+ info->max_num_events;
+}
+
+static int
+test_ethdev_config_run(struct rte_event_dev_config *dev_conf,
+ struct rte_event_dev_info *info,
+ void (*fn)(struct rte_event_dev_config *dev_conf,
+ struct rte_event_dev_info *info))
+{
+ devconf_set_default_sane_values(dev_conf, info);
+ fn(dev_conf, info);
+ return rte_event_dev_configure(TEST_DEV_ID, dev_conf);
+}
+
+static void
+min_dequeue_limit(struct rte_event_dev_config *dev_conf,
+ struct rte_event_dev_info *info)
+{
+ dev_conf->dequeue_timeout_ns = info->min_dequeue_timeout_ns - 1;
+}
+
+static void
+max_dequeue_limit(struct rte_event_dev_config *dev_conf,
+ struct rte_event_dev_info *info)
+{
+ dev_conf->dequeue_timeout_ns = info->max_dequeue_timeout_ns + 1;
+}
+
+static void
+max_events_limit(struct rte_event_dev_config *dev_conf,
+ struct rte_event_dev_info *info)
+{
+ dev_conf->nb_events_limit = info->max_num_events + 1;
+}
+
+static void
+max_event_ports(struct rte_event_dev_config *dev_conf,
+ struct rte_event_dev_info *info)
+{
+ dev_conf->nb_event_ports = info->max_event_ports + 1;
+}
+
+static void
+max_event_queues(struct rte_event_dev_config *dev_conf,
+ struct rte_event_dev_info *info)
+{
+ dev_conf->nb_event_queues = info->max_event_queues + 1;
+}
+
+static void
+max_event_queue_flows(struct rte_event_dev_config *dev_conf,
+ struct rte_event_dev_info *info)
+{
+ dev_conf->nb_event_queue_flows = info->max_event_queue_flows + 1;
+}
+
+static void
+max_event_port_dequeue_depth(struct rte_event_dev_config *dev_conf,
+ struct rte_event_dev_info *info)
+{
+ dev_conf->nb_event_port_dequeue_depth =
+ info->max_event_port_dequeue_depth + 1;
+}
+
+static void
+max_event_port_enqueue_depth(struct rte_event_dev_config *dev_conf,
+ struct rte_event_dev_info *info)
+{
+ dev_conf->nb_event_port_enqueue_depth =
+ info->max_event_port_enqueue_depth + 1;
+}
+
+
+static int
+test_eventdev_configure(void)
+{
+ int ret;
+ struct rte_event_dev_config dev_conf;
+ struct rte_event_dev_info info;
+ ret = rte_event_dev_configure(TEST_DEV_ID, NULL);
+ TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+
+ ret = rte_event_dev_info_get(TEST_DEV_ID, &info);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get event dev info");
+
+ /* Check limits */
+ TEST_ASSERT_EQUAL(-EINVAL,
+ test_ethdev_config_run(&dev_conf, &info, min_dequeue_limit),
+ "Config negative test failed");
+ TEST_ASSERT_EQUAL(-EINVAL,
+ test_ethdev_config_run(&dev_conf, &info, max_dequeue_limit),
+ "Config negative test failed");
+ TEST_ASSERT_EQUAL(-EINVAL,
+ test_ethdev_config_run(&dev_conf, &info, max_events_limit),
+ "Config negative test failed");
+ TEST_ASSERT_EQUAL(-EINVAL,
+ test_ethdev_config_run(&dev_conf, &info, max_event_ports),
+ "Config negative test failed");
+ TEST_ASSERT_EQUAL(-EINVAL,
+ test_ethdev_config_run(&dev_conf, &info, max_event_queues),
+ "Config negative test failed");
+ TEST_ASSERT_EQUAL(-EINVAL,
+ test_ethdev_config_run(&dev_conf, &info, max_event_queue_flows),
+ "Config negative test failed");
+ TEST_ASSERT_EQUAL(-EINVAL,
+ test_ethdev_config_run(&dev_conf, &info,
+ max_event_port_dequeue_depth),
+ "Config negative test failed");
+ TEST_ASSERT_EQUAL(-EINVAL,
+ test_ethdev_config_run(&dev_conf, &info,
+ max_event_port_enqueue_depth),
+ "Config negative test failed");
+
+ /* Positive case */
+ devconf_set_default_sane_values(&dev_conf, &info);
+ ret = rte_event_dev_configure(TEST_DEV_ID, &dev_conf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to configure eventdev");
+
+ /* re-configure */
+ devconf_set_default_sane_values(&dev_conf, &info);
+ dev_conf.nb_event_ports = info.max_event_ports/2;
+ dev_conf.nb_event_queues = info.max_event_queues/2;
+ ret = rte_event_dev_configure(TEST_DEV_ID, &dev_conf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to re configure eventdev");
+
+ /* re-configure back to max_event_queues and max_event_ports */
+ devconf_set_default_sane_values(&dev_conf, &info);
+ ret = rte_event_dev_configure(TEST_DEV_ID, &dev_conf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to re-configure eventdev");
+
+ return TEST_SUCCESS;
+
+}
+
+static int
+eventdev_configure_setup(void)
+{
+ int ret;
+ struct rte_event_dev_config dev_conf;
+ struct rte_event_dev_info info;
+
+ ret = rte_event_dev_info_get(TEST_DEV_ID, &info);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get event dev info");
+ devconf_set_default_sane_values(&dev_conf, &info);
+ ret = rte_event_dev_configure(TEST_DEV_ID, &dev_conf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to configure eventdev");
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_eventdev_queue_default_conf_get(void)
+{
+ int i, ret;
+ struct rte_event_queue_conf qconf;
+
+ ret = rte_event_queue_default_conf_get(TEST_DEV_ID, 0, NULL);
+ TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+
+ for (i = 0; i < rte_event_queue_count(TEST_DEV_ID); i++) {
+ ret = rte_event_queue_default_conf_get(TEST_DEV_ID, i,
+ &qconf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get queue%d info", i);
+ }
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_eventdev_queue_setup(void)
+{
+ int i, ret;
+ struct rte_event_dev_info info;
+ struct rte_event_queue_conf qconf;
+
+ ret = rte_event_dev_info_get(TEST_DEV_ID, &info);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get event dev info");
+
+ /* Negative cases */
+ ret = rte_event_queue_default_conf_get(TEST_DEV_ID, 0, &qconf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get queue0 info");
+ qconf.event_queue_cfg = (RTE_EVENT_QUEUE_CFG_ALL_TYPES &
+ RTE_EVENT_QUEUE_CFG_TYPE_MASK);
+ qconf.nb_atomic_flows = info.max_event_queue_flows + 1;
+ ret = rte_event_queue_setup(TEST_DEV_ID, 0, &qconf);
+ TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+
+ qconf.nb_atomic_flows = info.max_event_queue_flows;
+ qconf.event_queue_cfg = (RTE_EVENT_QUEUE_CFG_ORDERED_ONLY &
+ RTE_EVENT_QUEUE_CFG_TYPE_MASK);
+ qconf.nb_atomic_order_sequences = info.max_event_queue_flows + 1;
+ ret = rte_event_queue_setup(TEST_DEV_ID, 0, &qconf);
+ TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+
+ ret = rte_event_queue_setup(TEST_DEV_ID, info.max_event_queues,
+ &qconf);
+ TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+
+ /* Positive case */
+ ret = rte_event_queue_default_conf_get(TEST_DEV_ID, 0, &qconf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get queue0 info");
+ ret = rte_event_queue_setup(TEST_DEV_ID, 0, &qconf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to setup queue0");
+
+
+ for (i = 0; i < rte_event_queue_count(TEST_DEV_ID); i++) {
+ ret = rte_event_queue_setup(TEST_DEV_ID, i, NULL);
+ TEST_ASSERT_SUCCESS(ret, "Failed to setup queue%d", i);
+ }
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_eventdev_queue_count(void)
+{
+ int ret;
+ struct rte_event_dev_info info;
+
+ ret = rte_event_dev_info_get(TEST_DEV_ID, &info);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get event dev info");
+
+ TEST_ASSERT_EQUAL(rte_event_queue_count(TEST_DEV_ID),
+ info.max_event_queues, "Wrong queue count");
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_eventdev_queue_priority(void)
+{
+ int i, ret;
+ struct rte_event_dev_info info;
+ struct rte_event_queue_conf qconf;
+ uint8_t priority;
+
+ ret = rte_event_dev_info_get(TEST_DEV_ID, &info);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get event dev info");
+
+ for (i = 0; i < rte_event_queue_count(TEST_DEV_ID); i++) {
+ ret = rte_event_queue_default_conf_get(TEST_DEV_ID, i,
+ &qconf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get queue%d def conf", i);
+ qconf.priority = i % RTE_EVENT_DEV_PRIORITY_LOWEST;
+ ret = rte_event_queue_setup(TEST_DEV_ID, i, &qconf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to setup queue%d", i);
+ }
+
+ for (i = 0; i < rte_event_queue_count(TEST_DEV_ID); i++) {
+ priority = rte_event_queue_priority(TEST_DEV_ID, i);
+ if (info.event_dev_cap & RTE_EVENT_DEV_CAP_QUEUE_QOS)
+ TEST_ASSERT_EQUAL(priority,
+ i % RTE_EVENT_DEV_PRIORITY_LOWEST,
+ "Wrong priority value for queue%d", i);
+ else
+ TEST_ASSERT_EQUAL(priority,
+ RTE_EVENT_DEV_PRIORITY_NORMAL,
+ "Wrong priority value for queue%d", i);
+ }
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_eventdev_port_default_conf_get(void)
+{
+ int i, ret;
+ struct rte_event_port_conf pconf;
+
+ ret = rte_event_port_default_conf_get(TEST_DEV_ID, 0, NULL);
+ TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+
+ ret = rte_event_port_default_conf_get(TEST_DEV_ID,
+ rte_event_port_count(TEST_DEV_ID) + 1, NULL);
+ TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+
+ for (i = 0; i < rte_event_port_count(TEST_DEV_ID); i++) {
+ ret = rte_event_port_default_conf_get(TEST_DEV_ID, i,
+ &pconf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get port%d info", i);
+ }
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_eventdev_port_setup(void)
+{
+ int i, ret;
+ struct rte_event_dev_info info;
+ struct rte_event_port_conf pconf;
+
+ ret = rte_event_dev_info_get(TEST_DEV_ID, &info);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get event dev info");
+
+ /* Negative cases */
+ ret = rte_event_port_default_conf_get(TEST_DEV_ID, 0, &pconf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get port0 info");
+ pconf.new_event_threshold = info.max_num_events + 1;
+ ret = rte_event_port_setup(TEST_DEV_ID, 0, &pconf);
+ TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+
+ pconf.new_event_threshold = info.max_num_events;
+ pconf.dequeue_depth = info.max_event_port_dequeue_depth + 1;
+ ret = rte_event_port_setup(TEST_DEV_ID, 0, &pconf);
+ TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+
+ pconf.dequeue_depth = info.max_event_port_dequeue_depth;
+ pconf.enqueue_depth = info.max_event_port_enqueue_depth + 1;
+ ret = rte_event_port_setup(TEST_DEV_ID, 0, &pconf);
+ TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+
+ ret = rte_event_port_setup(TEST_DEV_ID, info.max_event_ports,
+ &pconf);
+ TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+
+ /* Positive case */
+ ret = rte_event_port_default_conf_get(TEST_DEV_ID, 0, &pconf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get port0 info");
+ ret = rte_event_port_setup(TEST_DEV_ID, 0, &pconf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to setup port0");
+
+
+ for (i = 0; i < rte_event_port_count(TEST_DEV_ID); i++) {
+ ret = rte_event_port_setup(TEST_DEV_ID, i, NULL);
+ TEST_ASSERT_SUCCESS(ret, "Failed to setup port%d", i);
+ }
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_eventdev_dequeue_depth(void)
+{
+ int ret;
+ struct rte_event_dev_info info;
+ struct rte_event_port_conf pconf;
+
+ ret = rte_event_dev_info_get(TEST_DEV_ID, &info);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get event dev info");
+
+ ret = rte_event_port_default_conf_get(TEST_DEV_ID, 0, &pconf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get port0 info");
+ ret = rte_event_port_setup(TEST_DEV_ID, 0, &pconf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to setup port0");
+
+ TEST_ASSERT_EQUAL(rte_event_port_dequeue_depth(TEST_DEV_ID, 0),
+ pconf.dequeue_depth, "Wrong port dequeue depth");
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_eventdev_enqueue_depth(void)
+{
+ int ret;
+ struct rte_event_dev_info info;
+ struct rte_event_port_conf pconf;
+
+ ret = rte_event_dev_info_get(TEST_DEV_ID, &info);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get event dev info");
+
+ ret = rte_event_port_default_conf_get(TEST_DEV_ID, 0, &pconf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get port0 info");
+ ret = rte_event_port_setup(TEST_DEV_ID, 0, &pconf);
+ TEST_ASSERT_SUCCESS(ret, "Failed to setup port0");
+
+ TEST_ASSERT_EQUAL(rte_event_port_enqueue_depth(TEST_DEV_ID, 0),
+ pconf.enqueue_depth, "Wrong port enqueue depth");
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_eventdev_port_count(void)
+{
+ int ret;
+ struct rte_event_dev_info info;
+
+ ret = rte_event_dev_info_get(TEST_DEV_ID, &info);
+ TEST_ASSERT_SUCCESS(ret, "Failed to get event dev info");
+
+ TEST_ASSERT_EQUAL(rte_event_port_count(TEST_DEV_ID),
+ info.max_event_ports, "Wrong port count");
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_eventdev_timeout_ticks(void)
+{
+ int ret;
+ uint64_t timeout_ticks;
+
+ ret = rte_event_dequeue_timeout_ticks(TEST_DEV_ID, 100, &timeout_ticks);
+ TEST_ASSERT_SUCCESS(ret, "Fail to get timeout_ticks");
+
+ return TEST_SUCCESS;
+}
+
+
+static int
+test_eventdev_start_stop(void)
+{
+ int i, ret;
+
+ ret = eventdev_configure_setup();
+ TEST_ASSERT_SUCCESS(ret, "Failed to configure eventdev");
+
+ for (i = 0; i < rte_event_queue_count(TEST_DEV_ID); i++) {
+ ret = rte_event_queue_setup(TEST_DEV_ID, i, NULL);
+ TEST_ASSERT_SUCCESS(ret, "Failed to setup queue%d", i);
+ }
+
+ for (i = 0; i < rte_event_port_count(TEST_DEV_ID); i++) {
+ ret = rte_event_port_setup(TEST_DEV_ID, i, NULL);
+ TEST_ASSERT_SUCCESS(ret, "Failed to setup port%d", i);
+ }
+
+ ret = rte_event_dev_start(TEST_DEV_ID);
+ TEST_ASSERT_SUCCESS(ret, "Failed to start device%d", TEST_DEV_ID);
+
+ rte_event_dev_stop(TEST_DEV_ID);
+ return TEST_SUCCESS;
+}
+
+
+static int
+eventdev_setup_device(void)
+{
+ int i, ret;
+
+ ret = eventdev_configure_setup();
+ TEST_ASSERT_SUCCESS(ret, "Failed to configure eventdev");
+
+ for (i = 0; i < rte_event_queue_count(TEST_DEV_ID); i++) {
+ ret = rte_event_queue_setup(TEST_DEV_ID, i, NULL);
+ TEST_ASSERT_SUCCESS(ret, "Failed to setup queue%d", i);
+ }
+
+ for (i = 0; i < rte_event_port_count(TEST_DEV_ID); i++) {
+ ret = rte_event_port_setup(TEST_DEV_ID, i, NULL);
+ TEST_ASSERT_SUCCESS(ret, "Failed to setup port%d", i);
+ }
+
+ ret = rte_event_dev_start(TEST_DEV_ID);
+ TEST_ASSERT_SUCCESS(ret, "Failed to start device%d", TEST_DEV_ID);
+
+ return TEST_SUCCESS;
+}
+
+static void
+eventdev_stop_device(void)
+{
+ rte_event_dev_stop(TEST_DEV_ID);
+}
+
+static int
+test_eventdev_link(void)
+{
+ int ret, nb_queues, i;
+ uint8_t queues[RTE_EVENT_MAX_QUEUES_PER_DEV];
+ uint8_t priorities[RTE_EVENT_MAX_QUEUES_PER_DEV];
+
+ ret = rte_event_port_link(TEST_DEV_ID, 0, NULL, NULL, 0);
+ TEST_ASSERT(ret >= 0, "Failed to link with NULL device%d",
+ TEST_DEV_ID);
+
+ nb_queues = rte_event_queue_count(TEST_DEV_ID);
+ for (i = 0; i < nb_queues; i++) {
+ queues[i] = i;
+ priorities[i] = RTE_EVENT_DEV_PRIORITY_NORMAL;
+ }
+
+ ret = rte_event_port_link(TEST_DEV_ID, 0, queues,
+ priorities, nb_queues);
+ TEST_ASSERT(ret == nb_queues, "Failed to link(device%d) ret=%d",
+ TEST_DEV_ID, ret);
+ return TEST_SUCCESS;
+}
+
+static int
+test_eventdev_unlink(void)
+{
+ int ret, nb_queues, i;
+ uint8_t queues[RTE_EVENT_MAX_QUEUES_PER_DEV];
+
+ ret = rte_event_port_unlink(TEST_DEV_ID, 0, NULL, 0);
+ TEST_ASSERT(ret >= 0, "Failed to unlink with NULL device%d",
+ TEST_DEV_ID);
+
+ nb_queues = rte_event_queue_count(TEST_DEV_ID);
+ for (i = 0; i < nb_queues; i++)
+ queues[i] = i;
+
+
+ ret = rte_event_port_unlink(TEST_DEV_ID, 0, queues, nb_queues);
+ TEST_ASSERT(ret == nb_queues, "Failed to unlink(device%d) ret=%d",
+ TEST_DEV_ID, ret);
+ return TEST_SUCCESS;
+}
+
+static int
+test_eventdev_link_get(void)
+{
+ int ret, nb_queues, i;
+ uint8_t queues[RTE_EVENT_MAX_QUEUES_PER_DEV];
+ uint8_t priorities[RTE_EVENT_MAX_QUEUES_PER_DEV];
+
+ /* link all queues */
+ ret = rte_event_port_link(TEST_DEV_ID, 0, NULL, NULL, 0);
+ TEST_ASSERT(ret >= 0, "Failed to link with NULL device%d",
+ TEST_DEV_ID);
+
+ nb_queues = rte_event_queue_count(TEST_DEV_ID);
+ for (i = 0; i < nb_queues; i++)
+ queues[i] = i;
+
+ ret = rte_event_port_unlink(TEST_DEV_ID, 0, queues, nb_queues);
+ TEST_ASSERT(ret == nb_queues, "Failed to unlink(device%d) ret=%d",
+ TEST_DEV_ID, ret);
+
+ ret = rte_event_port_links_get(TEST_DEV_ID, 0, queues, priorities);
+ TEST_ASSERT(ret == 0, "(%d)Wrong link get=%d", TEST_DEV_ID, ret);
+
+ /* link all queues and get the links */
+ nb_queues = rte_event_queue_count(TEST_DEV_ID);
+ for (i = 0; i < nb_queues; i++) {
+ queues[i] = i;
+ priorities[i] = RTE_EVENT_DEV_PRIORITY_NORMAL;
+ }
+ ret = rte_event_port_link(TEST_DEV_ID, 0, queues, priorities,
+ nb_queues);
+ TEST_ASSERT(ret == nb_queues, "Failed to link(device%d) ret=%d",
+ TEST_DEV_ID, ret);
+ ret = rte_event_port_links_get(TEST_DEV_ID, 0, queues, priorities);
+ TEST_ASSERT(ret == nb_queues, "(%d)Wrong link get ret=%d expected=%d",
+ TEST_DEV_ID, ret, nb_queues);
+ /* unlink all*/
+ ret = rte_event_port_unlink(TEST_DEV_ID, 0, NULL, 0);
+ TEST_ASSERT(ret == nb_queues, "Failed to unlink(device%d) ret=%d",
+ TEST_DEV_ID, ret);
+ /* link just one queue */
+ queues[0] = 0;
+ priorities[0] = RTE_EVENT_DEV_PRIORITY_NORMAL;
+
+ ret = rte_event_port_link(TEST_DEV_ID, 0, queues, priorities, 1);
+ TEST_ASSERT(ret == 1, "Failed to link(device%d) ret=%d",
+ TEST_DEV_ID, ret);
+ ret = rte_event_port_links_get(TEST_DEV_ID, 0, queues, priorities);
+ TEST_ASSERT(ret == 1, "(%d)Wrong link get ret=%d expected=%d",
+ TEST_DEV_ID, ret, 1);
+ /* unlink all*/
+ ret = rte_event_port_unlink(TEST_DEV_ID, 0, NULL, 0);
+ TEST_ASSERT(ret == nb_queues, "Failed to unlink(device%d) ret=%d",
+ TEST_DEV_ID, ret);
+ /* 4links and 2 unlinks */
+ nb_queues = rte_event_queue_count(TEST_DEV_ID);
+ if (nb_queues >= 4) {
+ for (i = 0; i < 4; i++) {
+ queues[i] = i;
+ priorities[i] = 0x40;
+ }
+ ret = rte_event_port_link(TEST_DEV_ID, 0, queues, priorities,
+ 4);
+ TEST_ASSERT(ret == 4, "Failed to link(device%d) ret=%d",
+ TEST_DEV_ID, ret);
+
+ for (i = 0; i < 2; i++)
+ queues[i] = i;
+
+ ret = rte_event_port_unlink(TEST_DEV_ID, 0, queues, 2);
+ TEST_ASSERT(ret == 2, "Failed to unlink(device%d) ret=%d",
+ TEST_DEV_ID, ret);
+ ret = rte_event_port_links_get(TEST_DEV_ID, 0,
+ queues, priorities);
+ TEST_ASSERT(ret == 2, "(%d)Wrong link get ret=%d expected=%d",
+ TEST_DEV_ID, ret, 2);
+ TEST_ASSERT(queues[0] == 2, "ret=%d expected=%d", ret, 2);
+ TEST_ASSERT(priorities[0] == 0x40, "ret=%d expected=%d",
+ ret, 0x40);
+ TEST_ASSERT(queues[1] == 3, "ret=%d expected=%d", ret, 3);
+ TEST_ASSERT(priorities[1] == 0x40, "ret=%d expected=%d",
+ ret, 0x40);
+ }
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_eventdev_close(void)
+{
+ rte_event_dev_stop(TEST_DEV_ID);
+ return rte_event_dev_close(TEST_DEV_ID);
+}
+
+static struct unit_test_suite eventdev_common_testsuite = {
+ .suite_name = "eventdev common code unit test suite",
+ .setup = testsuite_setup,
+ .teardown = testsuite_teardown,
+ .unit_test_cases = {
+ TEST_CASE_ST(NULL, NULL,
+ test_eventdev_count),
+ TEST_CASE_ST(NULL, NULL,
+ test_eventdev_get_dev_id),
+ TEST_CASE_ST(NULL, NULL,
+ test_eventdev_socket_id),
+ TEST_CASE_ST(NULL, NULL,
+ test_eventdev_info_get),
+ TEST_CASE_ST(NULL, NULL,
+ test_eventdev_configure),
+ TEST_CASE_ST(eventdev_configure_setup, NULL,
+ test_eventdev_queue_default_conf_get),
+ TEST_CASE_ST(eventdev_configure_setup, NULL,
+ test_eventdev_queue_setup),
+ TEST_CASE_ST(eventdev_configure_setup, NULL,
+ test_eventdev_queue_count),
+ TEST_CASE_ST(eventdev_configure_setup, NULL,
+ test_eventdev_queue_priority),
+ TEST_CASE_ST(eventdev_configure_setup, NULL,
+ test_eventdev_port_default_conf_get),
+ TEST_CASE_ST(eventdev_configure_setup, NULL,
+ test_eventdev_port_setup),
+ TEST_CASE_ST(eventdev_configure_setup, NULL,
+ test_eventdev_dequeue_depth),
+ TEST_CASE_ST(eventdev_configure_setup, NULL,
+ test_eventdev_enqueue_depth),
+ TEST_CASE_ST(eventdev_configure_setup, NULL,
+ test_eventdev_port_count),
+ TEST_CASE_ST(eventdev_configure_setup, NULL,
+ test_eventdev_timeout_ticks),
+ TEST_CASE_ST(NULL, NULL,
+ test_eventdev_start_stop),
+ TEST_CASE_ST(eventdev_setup_device, eventdev_stop_device,
+ test_eventdev_link),
+ TEST_CASE_ST(eventdev_setup_device, eventdev_stop_device,
+ test_eventdev_unlink),
+ TEST_CASE_ST(eventdev_setup_device, eventdev_stop_device,
+ test_eventdev_link_get),
+ TEST_CASE_ST(eventdev_setup_device, NULL,
+ test_eventdev_close),
+ TEST_CASES_END() /**< NULL terminate unit test array */
+ }
+};
+
+static int
+test_eventdev_common(void)
+{
+ return unit_test_suite_runner(&eventdev_common_testsuite);
+}
+
+REGISTER_TEST_COMMAND(eventdev_common_autotest, test_eventdev_common);
--
2.5.5
^ permalink raw reply related
* [PATCH v4 5/6] event/skeleton: add skeleton eventdev driver
From: Jerin Jacob @ 2016-12-21 9:25 UTC (permalink / raw)
To: dev
Cc: thomas.monjalon, bruce.richardson, hemant.agrawal, gage.eads,
harry.van.haaren, Jerin Jacob
In-Reply-To: <1482312326-2589-1-git-send-email-jerin.jacob@caviumnetworks.com>
The skeleton driver facilitates, bootstrapping the new
eventdev driver and creates a platform to verify
the northbound eventdev common code.
The driver supports both VDEV and PCI based eventdev
devices.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
---
MAINTAINERS | 1 +
config/common_base | 8 +
drivers/Makefile | 1 +
drivers/event/Makefile | 36 ++
drivers/event/skeleton/Makefile | 55 +++
.../skeleton/rte_pmd_skeleton_event_version.map | 4 +
drivers/event/skeleton/skeleton_eventdev.c | 519 +++++++++++++++++++++
drivers/event/skeleton/skeleton_eventdev.h | 68 +++
mk/rte.app.mk | 4 +
9 files changed, 696 insertions(+)
create mode 100644 drivers/event/Makefile
create mode 100644 drivers/event/skeleton/Makefile
create mode 100644 drivers/event/skeleton/rte_pmd_skeleton_event_version.map
create mode 100644 drivers/event/skeleton/skeleton_eventdev.c
create mode 100644 drivers/event/skeleton/skeleton_eventdev.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 8e59352..a10899f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -252,6 +252,7 @@ F: examples/l2fwd-crypto/
Eventdev API - EXPERIMENTAL
M: Jerin Jacob <jerin.jacob@caviumnetworks.com>
F: lib/librte_eventdev/
+F: drivers/event/skeleton/
Networking Drivers
------------------
diff --git a/config/common_base b/config/common_base
index 3a17dfb..650df13 100644
--- a/config/common_base
+++ b/config/common_base
@@ -418,6 +418,14 @@ CONFIG_RTE_LIBRTE_EVENTDEV=y
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
+
+#
+# Compile PMD for skeleton event device
+#
+CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
+CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
+
+#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
diff --git a/drivers/Makefile b/drivers/Makefile
index 81c03a8..40b8347 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -33,5 +33,6 @@ include $(RTE_SDK)/mk/rte.vars.mk
DIRS-y += net
DIRS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += crypto
+DIRS-$(CONFIG_RTE_LIBRTE_EVENTDEV) += event
include $(RTE_SDK)/mk/rte.subdir.mk
diff --git a/drivers/event/Makefile b/drivers/event/Makefile
new file mode 100644
index 0000000..678279f
--- /dev/null
+++ b/drivers/event/Makefile
@@ -0,0 +1,36 @@
+# BSD LICENSE
+#
+# Copyright(c) 2016 Cavium networks. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Cavium networks nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+DIRS-$(CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV) += skeleton
+
+include $(RTE_SDK)/mk/rte.subdir.mk
diff --git a/drivers/event/skeleton/Makefile b/drivers/event/skeleton/Makefile
new file mode 100644
index 0000000..bd22832
--- /dev/null
+++ b/drivers/event/skeleton/Makefile
@@ -0,0 +1,55 @@
+# BSD LICENSE
+#
+# Copyright(c) 2016 Cavium Networks. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Cavium Networks nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+#
+# library name
+#
+LIB = librte_pmd_skeleton_event.a
+
+CFLAGS += $(WERROR_FLAGS)
+
+EXPORT_MAP := rte_pmd_skeleton_event_version.map
+
+LIBABIVER := 1
+
+#
+# all source are stored in SRCS-y
+#
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV) += skeleton_eventdev.c
+
+# this lib depends upon:
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV) += lib/librte_eventdev
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/event/skeleton/rte_pmd_skeleton_event_version.map b/drivers/event/skeleton/rte_pmd_skeleton_event_version.map
new file mode 100644
index 0000000..31eca32
--- /dev/null
+++ b/drivers/event/skeleton/rte_pmd_skeleton_event_version.map
@@ -0,0 +1,4 @@
+DPDK_17.02 {
+
+ local: *;
+};
diff --git a/drivers/event/skeleton/skeleton_eventdev.c b/drivers/event/skeleton/skeleton_eventdev.c
new file mode 100644
index 0000000..085cb86
--- /dev/null
+++ b/drivers/event/skeleton/skeleton_eventdev.c
@@ -0,0 +1,519 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright (C) Cavium networks Ltd. 2016.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Cavium networks nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <assert.h>
+#include <stdio.h>
+#include <stdbool.h>
+#include <errno.h>
+#include <stdint.h>
+#include <string.h>
+
+#include <rte_byteorder.h>
+#include <rte_common.h>
+#include <rte_debug.h>
+#include <rte_dev.h>
+#include <rte_eal.h>
+#include <rte_log.h>
+#include <rte_memory.h>
+#include <rte_memzone.h>
+#include <rte_malloc.h>
+#include <rte_pci.h>
+#include <rte_lcore.h>
+#include <rte_vdev.h>
+
+#include "skeleton_eventdev.h"
+
+#define EVENTDEV_NAME_SKELETON_PMD event_skeleton
+/**< Skeleton event device PMD name */
+
+static uint16_t
+skeleton_eventdev_enqueue(void *port, const struct rte_event *ev)
+{
+ struct skeleton_port *sp = port;
+
+ RTE_SET_USED(sp);
+ RTE_SET_USED(ev);
+ RTE_SET_USED(port);
+
+ return 0;
+}
+
+static uint16_t
+skeleton_eventdev_enqueue_burst(void *port, const struct rte_event ev[],
+ uint16_t nb_events)
+{
+ struct skeleton_port *sp = port;
+
+ RTE_SET_USED(sp);
+ RTE_SET_USED(ev);
+ RTE_SET_USED(port);
+ RTE_SET_USED(nb_events);
+
+ return 0;
+}
+
+static uint16_t
+skeleton_eventdev_dequeue(void *port, struct rte_event *ev,
+ uint64_t timeout_ticks)
+{
+ struct skeleton_port *sp = port;
+
+ RTE_SET_USED(sp);
+ RTE_SET_USED(ev);
+ RTE_SET_USED(timeout_ticks);
+
+ return 0;
+}
+
+static uint16_t
+skeleton_eventdev_dequeue_burst(void *port, struct rte_event ev[],
+ uint16_t nb_events, uint64_t timeout_ticks)
+{
+ struct skeleton_port *sp = port;
+
+ RTE_SET_USED(sp);
+ RTE_SET_USED(ev);
+ RTE_SET_USED(nb_events);
+ RTE_SET_USED(timeout_ticks);
+
+ return 0;
+}
+
+static void
+skeleton_eventdev_info_get(struct rte_eventdev *dev,
+ struct rte_event_dev_info *dev_info)
+{
+ struct skeleton_eventdev *skel = skeleton_pmd_priv(dev);
+
+ PMD_DRV_FUNC_TRACE();
+
+ RTE_SET_USED(skel);
+
+ dev_info->min_dequeue_timeout_ns = 1;
+ dev_info->max_dequeue_timeout_ns = 10000;
+ dev_info->dequeue_timeout_ns = 25;
+ dev_info->max_event_queues = 64;
+ dev_info->max_event_queue_flows = (1ULL << 20);
+ dev_info->max_event_queue_priority_levels = 8;
+ dev_info->max_event_priority_levels = 8;
+ dev_info->max_event_ports = 32;
+ dev_info->max_event_port_dequeue_depth = 16;
+ dev_info->max_event_port_enqueue_depth = 16;
+ dev_info->max_num_events = (1ULL << 20);
+ dev_info->event_dev_cap = RTE_EVENT_DEV_CAP_QUEUE_QOS |
+ RTE_EVENT_DEV_CAP_EVENT_QOS;
+}
+
+static int
+skeleton_eventdev_configure(const struct rte_eventdev *dev)
+{
+ struct rte_eventdev_data *data = dev->data;
+ struct rte_event_dev_config *conf = &data->dev_conf;
+ struct skeleton_eventdev *skel = skeleton_pmd_priv(dev);
+
+ PMD_DRV_FUNC_TRACE();
+
+ RTE_SET_USED(conf);
+ RTE_SET_USED(skel);
+
+ PMD_DRV_LOG(DEBUG, "Configured eventdev devid=%d", dev->data->dev_id);
+ return 0;
+}
+
+static int
+skeleton_eventdev_start(struct rte_eventdev *dev)
+{
+ struct skeleton_eventdev *skel = skeleton_pmd_priv(dev);
+
+ PMD_DRV_FUNC_TRACE();
+
+ RTE_SET_USED(skel);
+
+ return 0;
+}
+
+static void
+skeleton_eventdev_stop(struct rte_eventdev *dev)
+{
+ struct skeleton_eventdev *skel = skeleton_pmd_priv(dev);
+
+ PMD_DRV_FUNC_TRACE();
+
+ RTE_SET_USED(skel);
+}
+
+static int
+skeleton_eventdev_close(struct rte_eventdev *dev)
+{
+ struct skeleton_eventdev *skel = skeleton_pmd_priv(dev);
+
+ PMD_DRV_FUNC_TRACE();
+
+ RTE_SET_USED(skel);
+
+ return 0;
+}
+
+static void
+skeleton_eventdev_queue_def_conf(struct rte_eventdev *dev, uint8_t queue_id,
+ struct rte_event_queue_conf *queue_conf)
+{
+ struct skeleton_eventdev *skel = skeleton_pmd_priv(dev);
+
+ PMD_DRV_FUNC_TRACE();
+
+ RTE_SET_USED(skel);
+ RTE_SET_USED(queue_id);
+
+ queue_conf->nb_atomic_flows = (1ULL << 20);
+ queue_conf->nb_atomic_order_sequences = (1ULL << 20);
+ queue_conf->event_queue_cfg = RTE_EVENT_QUEUE_CFG_DEFAULT;
+ queue_conf->priority = RTE_EVENT_DEV_PRIORITY_NORMAL;
+}
+
+static void
+skeleton_eventdev_queue_release(struct rte_eventdev *dev, uint8_t queue_id)
+{
+ PMD_DRV_FUNC_TRACE();
+
+ RTE_SET_USED(dev);
+ RTE_SET_USED(queue_id);
+}
+
+static int
+skeleton_eventdev_queue_setup(struct rte_eventdev *dev, uint8_t queue_id,
+ const struct rte_event_queue_conf *queue_conf)
+{
+ struct skeleton_eventdev *skel = skeleton_pmd_priv(dev);
+
+ PMD_DRV_FUNC_TRACE();
+
+ RTE_SET_USED(skel);
+ RTE_SET_USED(queue_conf);
+ RTE_SET_USED(queue_id);
+
+ return 0;
+}
+
+static void
+skeleton_eventdev_port_def_conf(struct rte_eventdev *dev, uint8_t port_id,
+ struct rte_event_port_conf *port_conf)
+{
+ struct skeleton_eventdev *skel = skeleton_pmd_priv(dev);
+
+ PMD_DRV_FUNC_TRACE();
+
+ RTE_SET_USED(skel);
+ RTE_SET_USED(port_id);
+
+ port_conf->new_event_threshold = 32 * 1024;
+ port_conf->dequeue_depth = 16;
+ port_conf->enqueue_depth = 16;
+}
+
+static void
+skeleton_eventdev_port_release(void *port)
+{
+ struct skeleton_port *sp = port;
+ PMD_DRV_FUNC_TRACE();
+
+ rte_free(sp);
+}
+
+static int
+skeleton_eventdev_port_setup(struct rte_eventdev *dev, uint8_t port_id,
+ const struct rte_event_port_conf *port_conf)
+{
+ struct skeleton_port *sp;
+ struct skeleton_eventdev *skel = skeleton_pmd_priv(dev);
+
+ PMD_DRV_FUNC_TRACE();
+
+ RTE_SET_USED(skel);
+ RTE_SET_USED(port_conf);
+
+ /* Free memory prior to re-allocation if needed */
+ if (dev->data->ports[port_id] != NULL) {
+ PMD_DRV_LOG(DEBUG, "Freeing memory prior to re-allocation %d",
+ port_id);
+ skeleton_eventdev_port_release(dev->data->ports[port_id]);
+ dev->data->ports[port_id] = NULL;
+ }
+
+ /* Allocate event port memory */
+ sp = rte_zmalloc_socket("eventdev port",
+ sizeof(struct skeleton_port), RTE_CACHE_LINE_SIZE,
+ dev->data->socket_id);
+ if (sp == NULL) {
+ PMD_DRV_ERR("Failed to allocate sp port_id=%d", port_id);
+ return -ENOMEM;
+ }
+
+ sp->port_id = port_id;
+
+ PMD_DRV_LOG(DEBUG, "[%d] sp=%p", port_id, sp);
+
+ dev->data->ports[port_id] = sp;
+ return 0;
+}
+
+static int
+skeleton_eventdev_port_link(void *port,
+ const uint8_t queues[], const uint8_t priorities[],
+ uint16_t nb_links)
+{
+ struct skeleton_port *sp = port;
+ PMD_DRV_FUNC_TRACE();
+
+ RTE_SET_USED(sp);
+ RTE_SET_USED(queues);
+ RTE_SET_USED(priorities);
+
+ /* Linked all the queues */
+ return (int)nb_links;
+}
+
+static int
+skeleton_eventdev_port_unlink(void *port, uint8_t queues[],
+ uint16_t nb_unlinks)
+{
+ struct skeleton_port *sp = port;
+ PMD_DRV_FUNC_TRACE();
+
+ RTE_SET_USED(sp);
+ RTE_SET_USED(queues);
+
+ /* Unlinked all the queues */
+ return (int)nb_unlinks;
+
+}
+
+static void
+skeleton_eventdev_timeout_ticks(struct rte_eventdev *dev, uint64_t ns,
+ uint64_t *timeout_ticks)
+{
+ struct skeleton_eventdev *skel = skeleton_pmd_priv(dev);
+ uint32_t scale = 1;
+
+ PMD_DRV_FUNC_TRACE();
+
+ RTE_SET_USED(skel);
+ *timeout_ticks = ns * scale;
+}
+
+static void
+skeleton_eventdev_dump(struct rte_eventdev *dev, FILE *f)
+{
+ struct skeleton_eventdev *skel = skeleton_pmd_priv(dev);
+
+ PMD_DRV_FUNC_TRACE();
+
+ RTE_SET_USED(skel);
+ RTE_SET_USED(f);
+}
+
+
+/* Initialize and register event driver with DPDK Application */
+static const struct rte_eventdev_ops skeleton_eventdev_ops = {
+ .dev_infos_get = skeleton_eventdev_info_get,
+ .dev_configure = skeleton_eventdev_configure,
+ .dev_start = skeleton_eventdev_start,
+ .dev_stop = skeleton_eventdev_stop,
+ .dev_close = skeleton_eventdev_close,
+ .queue_def_conf = skeleton_eventdev_queue_def_conf,
+ .queue_setup = skeleton_eventdev_queue_setup,
+ .queue_release = skeleton_eventdev_queue_release,
+ .port_def_conf = skeleton_eventdev_port_def_conf,
+ .port_setup = skeleton_eventdev_port_setup,
+ .port_release = skeleton_eventdev_port_release,
+ .port_link = skeleton_eventdev_port_link,
+ .port_unlink = skeleton_eventdev_port_unlink,
+ .timeout_ticks = skeleton_eventdev_timeout_ticks,
+ .dump = skeleton_eventdev_dump
+};
+
+static int
+skeleton_eventdev_init(struct rte_eventdev *eventdev)
+{
+ struct rte_pci_device *pci_dev;
+ struct skeleton_eventdev *skel = skeleton_pmd_priv(eventdev);
+ int ret = 0;
+
+ PMD_DRV_FUNC_TRACE();
+
+ eventdev->dev_ops = &skeleton_eventdev_ops;
+ eventdev->schedule = NULL;
+ eventdev->enqueue = skeleton_eventdev_enqueue;
+ eventdev->enqueue_burst = skeleton_eventdev_enqueue_burst;
+ eventdev->dequeue = skeleton_eventdev_dequeue;
+ eventdev->dequeue_burst = skeleton_eventdev_dequeue_burst;
+
+ /* For secondary processes, the primary has done all the work */
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+ return 0;
+
+ pci_dev = eventdev->pci_dev;
+
+ skel->reg_base = (uintptr_t)pci_dev->mem_resource[0].addr;
+ if (!skel->reg_base) {
+ PMD_DRV_ERR("Failed to map BAR0");
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ skel->device_id = pci_dev->id.device_id;
+ skel->vendor_id = pci_dev->id.vendor_id;
+ skel->subsystem_device_id = pci_dev->id.subsystem_device_id;
+ skel->subsystem_vendor_id = pci_dev->id.subsystem_vendor_id;
+
+ PMD_DRV_LOG(DEBUG, "pci device (%x:%x) %u:%u:%u:%u",
+ pci_dev->id.vendor_id, pci_dev->id.device_id,
+ pci_dev->addr.domain, pci_dev->addr.bus,
+ pci_dev->addr.devid, pci_dev->addr.function);
+
+ PMD_DRV_LOG(INFO, "dev_id=%d socket_id=%d (%x:%x)",
+ eventdev->data->dev_id, eventdev->data->socket_id,
+ skel->vendor_id, skel->device_id);
+
+fail:
+ return ret;
+}
+
+/* PCI based event device */
+
+#define EVENTDEV_SKEL_VENDOR_ID 0x177d
+#define EVENTDEV_SKEL_PRODUCT_ID 0x0001
+
+static const struct rte_pci_id pci_id_skeleton_map[] = {
+ {
+ RTE_PCI_DEVICE(EVENTDEV_SKEL_VENDOR_ID,
+ EVENTDEV_SKEL_PRODUCT_ID)
+ },
+ {
+ .vendor_id = 0,
+ },
+};
+
+static struct rte_eventdev_driver pci_eventdev_skeleton_pmd = {
+ .pci_drv = {
+ .id_table = pci_id_skeleton_map,
+ .drv_flags = RTE_PCI_DRV_NEED_MAPPING,
+ .probe = rte_event_pmd_pci_probe,
+ .remove = rte_event_pmd_pci_remove,
+ },
+ .eventdev_init = skeleton_eventdev_init,
+ .dev_private_size = sizeof(struct skeleton_eventdev),
+};
+
+RTE_PMD_REGISTER_PCI(event_skeleton_pci, pci_eventdev_skeleton_pmd.pci_drv);
+RTE_PMD_REGISTER_PCI_TABLE(event_skeleton_pci, pci_id_skeleton_map);
+
+/* VDEV based event device */
+
+/**
+ * Global static parameter used to create a unique name for each skeleton
+ * event device.
+ */
+static unsigned int skeleton_unique_id;
+
+static inline int
+skeleton_create_unique_device_name(char *name, size_t size)
+{
+ int ret;
+
+ if (name == NULL)
+ return -EINVAL;
+
+ ret = snprintf(name, size, "%s_%u", RTE_STR(EVENTDEV_NAME_SKELETON_PMD),
+ skeleton_unique_id++);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+static int
+skeleton_eventdev_create(int socket_id)
+{
+ struct rte_eventdev *eventdev;
+ char eventdev_name[RTE_EVENTDEV_NAME_MAX_LEN];
+
+ /* Create a unique device name */
+ if (skeleton_create_unique_device_name(eventdev_name,
+ RTE_EVENTDEV_NAME_MAX_LEN) != 0) {
+ PMD_DRV_ERR("Failed to create unique eventdev name");
+ return -EINVAL;
+ }
+
+ eventdev = rte_event_pmd_vdev_init(eventdev_name,
+ sizeof(struct skeleton_eventdev), socket_id);
+ if (eventdev == NULL) {
+ PMD_DRV_ERR("Failed to create eventdev vdev");
+ goto fail;
+ }
+
+ eventdev->dev_ops = &skeleton_eventdev_ops;
+ eventdev->schedule = NULL;
+ eventdev->enqueue = skeleton_eventdev_enqueue;
+ eventdev->enqueue_burst = skeleton_eventdev_enqueue_burst;
+ eventdev->dequeue = skeleton_eventdev_dequeue;
+ eventdev->dequeue_burst = skeleton_eventdev_dequeue_burst;
+
+ return 0;
+fail:
+ return -EFAULT;
+}
+
+static int
+skeleton_eventdev_probe(const char *name, __rte_unused const char *input_args)
+{
+ RTE_LOG(INFO, PMD, "Initializing %s on NUMA node %d\n", name,
+ rte_socket_id());
+ return skeleton_eventdev_create(rte_socket_id());
+}
+
+static int
+skeleton_eventdev_remove(const char *name)
+{
+ if (name == NULL)
+ return -EINVAL;
+
+ PMD_DRV_LOG(INFO, "Closing %s on NUMA node %d", name, rte_socket_id());
+
+ return 0;
+}
+
+static struct rte_vdev_driver vdev_eventdev_skeleton_pmd = {
+ .probe = skeleton_eventdev_probe,
+ .remove = skeleton_eventdev_remove
+};
+
+RTE_PMD_REGISTER_VDEV(EVENTDEV_NAME_SKELETON_PMD, vdev_eventdev_skeleton_pmd);
diff --git a/drivers/event/skeleton/skeleton_eventdev.h b/drivers/event/skeleton/skeleton_eventdev.h
new file mode 100644
index 0000000..1ce62da
--- /dev/null
+++ b/drivers/event/skeleton/skeleton_eventdev.h
@@ -0,0 +1,68 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright (C) Cavium networks Ltd. 2016.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Cavium networks nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __SKELETON_EVENTDEV_H__
+#define __SKELETON_EVENTDEV_H__
+
+#include <rte_eventdev_pmd.h>
+
+#ifdef RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG
+#define PMD_DRV_LOG(level, fmt, args...) \
+ RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
+#define PMD_DRV_FUNC_TRACE() PMD_DRV_LOG(DEBUG, ">>")
+#else
+#define PMD_DRV_LOG(level, fmt, args...) do { } while (0)
+#define PMD_DRV_FUNC_TRACE() do { } while (0)
+#endif
+
+#define PMD_DRV_ERR(fmt, args...) \
+ RTE_LOG(ERR, PMD, "%s(): " fmt "\n", __func__, ## args)
+
+struct skeleton_eventdev {
+ uintptr_t reg_base;
+ uint16_t device_id;
+ uint16_t vendor_id;
+ uint16_t subsystem_device_id;
+ uint16_t subsystem_vendor_id;
+} __rte_cache_aligned;
+
+struct skeleton_port {
+ uint8_t port_id;
+} __rte_cache_aligned;
+
+static inline struct skeleton_eventdev *
+skeleton_pmd_priv(const struct rte_eventdev *eventdev)
+{
+ return eventdev->data->dev_private;
+}
+
+#endif /* __SKELETON_EVENTDEV_H__ */
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 716725a..8341c13 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -148,6 +148,10 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ZUC) += -lrte_pmd_zuc
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ZUC) += -L$(LIBSSO_ZUC_PATH)/build -lsso_zuc
endif # CONFIG_RTE_LIBRTE_CRYPTODEV
+ifeq ($(CONFIG_RTE_LIBRTE_EVENTDEV),y)
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV) += -lrte_pmd_skeleton_event
+endif # CONFIG_RTE_LIBRTE_EVENTDEV
+
endif # !CONFIG_RTE_BUILD_SHARED_LIBS
_LDLIBS-y += --no-whole-archive
--
2.5.5
^ permalink raw reply related
* [PATCH v4 4/6] eventdev: implement PMD registration functions
From: Jerin Jacob @ 2016-12-21 9:25 UTC (permalink / raw)
To: dev
Cc: thomas.monjalon, bruce.richardson, hemant.agrawal, gage.eads,
harry.van.haaren, Jerin Jacob
In-Reply-To: <1482312326-2589-1-git-send-email-jerin.jacob@caviumnetworks.com>
This patch adds infrastructure for registering the vdev or
the PCI based event device.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
---
lib/librte_eventdev/rte_eventdev.c | 236 +++++++++++++++++++++++++++
lib/librte_eventdev/rte_eventdev_pmd.h | 111 +++++++++++++
lib/librte_eventdev/rte_eventdev_version.map | 6 +
3 files changed, 353 insertions(+)
diff --git a/lib/librte_eventdev/rte_eventdev.c b/lib/librte_eventdev/rte_eventdev.c
index b13eb00..c8f3e94 100644
--- a/lib/librte_eventdev/rte_eventdev.c
+++ b/lib/librte_eventdev/rte_eventdev.c
@@ -126,6 +126,8 @@ rte_event_dev_info_get(uint8_t dev_id, struct rte_event_dev_info *dev_info)
dev_info->dequeue_timeout_ns = dev->data->dev_conf.dequeue_timeout_ns;
dev_info->pci_dev = dev->pci_dev;
+ if (dev->driver)
+ dev_info->driver_name = dev->driver->pci_drv.driver.name;
return 0;
}
@@ -984,3 +986,237 @@ rte_event_dev_close(uint8_t dev_id)
return (*dev->dev_ops->dev_close)(dev);
}
+
+static inline int
+rte_eventdev_data_alloc(uint8_t dev_id, struct rte_eventdev_data **data,
+ int socket_id)
+{
+ char mz_name[RTE_EVENTDEV_NAME_MAX_LEN];
+ const struct rte_memzone *mz;
+ int n;
+
+ /* Generate memzone name */
+ n = snprintf(mz_name, sizeof(mz_name), "rte_eventdev_data_%u", dev_id);
+ if (n >= (int)sizeof(mz_name))
+ return -EINVAL;
+
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+ mz = rte_memzone_reserve(mz_name,
+ sizeof(struct rte_eventdev_data),
+ socket_id, 0);
+ } else
+ mz = rte_memzone_lookup(mz_name);
+
+ if (mz == NULL)
+ return -ENOMEM;
+
+ *data = mz->addr;
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+ memset(*data, 0, sizeof(struct rte_eventdev_data));
+
+ return 0;
+}
+
+static inline uint8_t
+rte_eventdev_find_free_device_index(void)
+{
+ uint8_t dev_id;
+
+ for (dev_id = 0; dev_id < RTE_EVENT_MAX_DEVS; dev_id++) {
+ if (rte_eventdevs[dev_id].attached ==
+ RTE_EVENTDEV_DETACHED)
+ return dev_id;
+ }
+ return RTE_EVENT_MAX_DEVS;
+}
+
+struct rte_eventdev *
+rte_event_pmd_allocate(const char *name, int socket_id)
+{
+ struct rte_eventdev *eventdev;
+ uint8_t dev_id;
+
+ if (rte_event_pmd_get_named_dev(name) != NULL) {
+ RTE_EDEV_LOG_ERR("Event device with name %s already "
+ "allocated!", name);
+ return NULL;
+ }
+
+ dev_id = rte_eventdev_find_free_device_index();
+ if (dev_id == RTE_EVENT_MAX_DEVS) {
+ RTE_EDEV_LOG_ERR("Reached maximum number of event devices");
+ return NULL;
+ }
+
+ eventdev = &rte_eventdevs[dev_id];
+
+ if (eventdev->data == NULL) {
+ struct rte_eventdev_data *eventdev_data = NULL;
+
+ int retval = rte_eventdev_data_alloc(dev_id, &eventdev_data,
+ socket_id);
+
+ if (retval < 0 || eventdev_data == NULL)
+ return NULL;
+
+ eventdev->data = eventdev_data;
+
+ snprintf(eventdev->data->name, RTE_EVENTDEV_NAME_MAX_LEN,
+ "%s", name);
+
+ eventdev->data->dev_id = dev_id;
+ eventdev->data->socket_id = socket_id;
+ eventdev->data->dev_started = 0;
+
+ eventdev->attached = RTE_EVENTDEV_ATTACHED;
+
+ eventdev_globals.nb_devs++;
+ }
+
+ return eventdev;
+}
+
+int
+rte_event_pmd_release(struct rte_eventdev *eventdev)
+{
+ int ret;
+
+ if (eventdev == NULL)
+ return -EINVAL;
+
+ ret = rte_event_dev_close(eventdev->data->dev_id);
+ if (ret < 0)
+ return ret;
+
+ eventdev->attached = RTE_EVENTDEV_DETACHED;
+ eventdev_globals.nb_devs--;
+ eventdev->data = NULL;
+
+ return 0;
+}
+
+struct rte_eventdev *
+rte_event_pmd_vdev_init(const char *name, size_t dev_private_size,
+ int socket_id)
+{
+ struct rte_eventdev *eventdev;
+
+ /* Allocate device structure */
+ eventdev = rte_event_pmd_allocate(name, socket_id);
+ if (eventdev == NULL)
+ return NULL;
+
+ /* Allocate private device structure */
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+ eventdev->data->dev_private =
+ rte_zmalloc_socket("eventdev device private",
+ dev_private_size,
+ RTE_CACHE_LINE_SIZE,
+ socket_id);
+
+ if (eventdev->data->dev_private == NULL)
+ rte_panic("Cannot allocate memzone for private device"
+ " data");
+ }
+
+ return eventdev;
+}
+
+int
+rte_event_pmd_pci_probe(struct rte_pci_driver *pci_drv,
+ struct rte_pci_device *pci_dev)
+{
+ struct rte_eventdev_driver *eventdrv;
+ struct rte_eventdev *eventdev;
+
+ char eventdev_name[RTE_EVENTDEV_NAME_MAX_LEN];
+
+ int retval;
+
+ eventdrv = (struct rte_eventdev_driver *)pci_drv;
+ if (eventdrv == NULL)
+ return -ENODEV;
+
+ rte_eal_pci_device_name(&pci_dev->addr, eventdev_name,
+ sizeof(eventdev_name));
+
+ eventdev = rte_event_pmd_allocate(eventdev_name,
+ pci_dev->device.numa_node);
+ if (eventdev == NULL)
+ return -ENOMEM;
+
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+ eventdev->data->dev_private =
+ rte_zmalloc_socket(
+ "eventdev private structure",
+ eventdrv->dev_private_size,
+ RTE_CACHE_LINE_SIZE,
+ rte_socket_id());
+
+ if (eventdev->data->dev_private == NULL)
+ rte_panic("Cannot allocate memzone for private "
+ "device data");
+ }
+
+ eventdev->pci_dev = pci_dev;
+ eventdev->driver = eventdrv;
+
+ /* Invoke PMD device initialization function */
+ retval = (*eventdrv->eventdev_init)(eventdev);
+ if (retval == 0)
+ return 0;
+
+ RTE_EDEV_LOG_ERR("driver %s: (vendor_id=0x%x device_id=0x%x)"
+ " failed", pci_drv->driver.name,
+ (unsigned int) pci_dev->id.vendor_id,
+ (unsigned int) pci_dev->id.device_id);
+
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+ rte_free(eventdev->data->dev_private);
+
+ eventdev->attached = RTE_EVENTDEV_DETACHED;
+ eventdev_globals.nb_devs--;
+
+ return -ENXIO;
+}
+
+int
+rte_event_pmd_pci_remove(struct rte_pci_device *pci_dev)
+{
+ const struct rte_eventdev_driver *eventdrv;
+ struct rte_eventdev *eventdev;
+ char eventdev_name[RTE_EVENTDEV_NAME_MAX_LEN];
+ int ret;
+
+ if (pci_dev == NULL)
+ return -EINVAL;
+
+ rte_eal_pci_device_name(&pci_dev->addr, eventdev_name,
+ sizeof(eventdev_name));
+
+ eventdev = rte_event_pmd_get_named_dev(eventdev_name);
+ if (eventdev == NULL)
+ return -ENODEV;
+
+ eventdrv = (const struct rte_eventdev_driver *)pci_dev->driver;
+ if (eventdrv == NULL)
+ return -ENODEV;
+
+ /* Invoke PMD device un-init function */
+ if (*eventdrv->eventdev_uninit) {
+ ret = (*eventdrv->eventdev_uninit)(eventdev);
+ if (ret)
+ return ret;
+ }
+
+ /* Free event device */
+ rte_event_pmd_release(eventdev);
+
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+ rte_free(eventdev->data->dev_private);
+
+ eventdev->pci_dev = NULL;
+ eventdev->driver = NULL;
+
+ return 0;
+}
diff --git a/lib/librte_eventdev/rte_eventdev_pmd.h b/lib/librte_eventdev/rte_eventdev_pmd.h
index e60eca9..c84c9a2 100644
--- a/lib/librte_eventdev/rte_eventdev_pmd.h
+++ b/lib/librte_eventdev/rte_eventdev_pmd.h
@@ -92,6 +92,60 @@ extern "C" {
#define RTE_EVENTDEV_DETACHED (0)
#define RTE_EVENTDEV_ATTACHED (1)
+/**
+ * Initialisation function of a event driver invoked for each matching
+ * event PCI device detected during the PCI probing phase.
+ *
+ * @param dev
+ * The dev pointer is the address of the *rte_eventdev* structure associated
+ * with the matching device and which has been [automatically] allocated in
+ * the *rte_event_devices* array.
+ *
+ * @return
+ * - 0: Success, the device is properly initialised by the driver.
+ * In particular, the driver MUST have set up the *dev_ops* pointer
+ * of the *dev* structure.
+ * - <0: Error code of the device initialisation failure.
+ */
+typedef int (*eventdev_init_t)(struct rte_eventdev *dev);
+
+/**
+ * Finalisation function of a driver invoked for each matching
+ * PCI device detected during the PCI closing phase.
+ *
+ * @param dev
+ * The dev pointer is the address of the *rte_eventdev* structure associated
+ * with the matching device and which has been [automatically] allocated in
+ * the *rte_event_devices* array.
+ *
+ * @return
+ * - 0: Success, the device is properly finalised by the driver.
+ * In particular, the driver MUST free the *dev_ops* pointer
+ * of the *dev* structure.
+ * - <0: Error code of the device initialisation failure.
+ */
+typedef int (*eventdev_uninit_t)(struct rte_eventdev *dev);
+
+/**
+ * The structure associated with a PMD driver.
+ *
+ * Each driver acts as a PCI driver and is represented by a generic
+ * *event_driver* structure that holds:
+ *
+ * - An *rte_pci_driver* structure (which must be the first field).
+ *
+ * - The *eventdev_init* function invoked for each matching PCI device.
+ *
+ * - The size of the private data to allocate for each matching device.
+ */
+struct rte_eventdev_driver {
+ struct rte_pci_driver pci_drv; /**< The PMD is also a PCI driver. */
+ unsigned int dev_private_size; /**< Size of device private data. */
+
+ eventdev_init_t eventdev_init; /**< Device init function. */
+ eventdev_uninit_t eventdev_uninit; /**< Device uninit function. */
+};
+
/** Global structure used for maintaining state of allocated event devices */
struct rte_eventdev_global {
uint8_t nb_devs; /**< Number of devices found */
@@ -396,6 +450,63 @@ struct rte_eventdev_ops {
/* Dump internal information */
};
+/**
+ * Allocates a new eventdev slot for an event device and returns the pointer
+ * to that slot for the driver to use.
+ *
+ * @param name
+ * Unique identifier name for each device
+ * @param socket_id
+ * Socket to allocate resources on.
+ * @return
+ * - Slot in the rte_dev_devices array for a new device;
+ */
+struct rte_eventdev *
+rte_event_pmd_allocate(const char *name, int socket_id);
+
+/**
+ * Release the specified eventdev device.
+ *
+ * @param eventdev
+ * The *eventdev* pointer is the address of the *rte_eventdev* structure.
+ * @return
+ * - 0 on success, negative on error
+ */
+int
+rte_event_pmd_release(struct rte_eventdev *eventdev);
+
+/**
+ * Creates a new virtual event device and returns the pointer to that device.
+ *
+ * @param name
+ * PMD type name
+ * @param dev_private_size
+ * Size of event PMDs private data
+ * @param socket_id
+ * Socket to allocate resources on.
+ *
+ * @return
+ * - Eventdev pointer if device is successfully created.
+ * - NULL if device cannot be created.
+ */
+struct rte_eventdev *
+rte_event_pmd_vdev_init(const char *name, size_t dev_private_size,
+ int socket_id);
+
+
+/**
+ * Wrapper for use by pci drivers as a .probe function to attach to a event
+ * interface.
+ */
+int rte_event_pmd_pci_probe(struct rte_pci_driver *pci_drv,
+ struct rte_pci_device *pci_dev);
+
+/**
+ * Wrapper for use by pci drivers as a .remove function to detach a event
+ * interface.
+ */
+int rte_event_pmd_pci_remove(struct rte_pci_device *pci_dev);
+
#ifdef __cplusplus
}
#endif
diff --git a/lib/librte_eventdev/rte_eventdev_version.map b/lib/librte_eventdev/rte_eventdev_version.map
index 3cae03d..68b8c81 100644
--- a/lib/librte_eventdev/rte_eventdev_version.map
+++ b/lib/librte_eventdev/rte_eventdev_version.map
@@ -29,5 +29,11 @@ DPDK_17.02 {
rte_event_dequeue_timeout_ticks;
+ rte_event_pmd_allocate;
+ rte_event_pmd_release;
+ rte_event_pmd_vdev_init;
+ rte_event_pmd_pci_probe;
+ rte_event_pmd_pci_remove;
+
local: *;
};
--
2.5.5
^ permalink raw reply related
* [PATCH v4 3/6] eventdev: implement the northbound APIs
From: Jerin Jacob @ 2016-12-21 9:25 UTC (permalink / raw)
To: dev
Cc: thomas.monjalon, bruce.richardson, hemant.agrawal, gage.eads,
harry.van.haaren, Jerin Jacob
In-Reply-To: <1482312326-2589-1-git-send-email-jerin.jacob@caviumnetworks.com>
This patch implements northbound eventdev API interface using
southbond driver interface
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
---
config/common_base | 6 +
lib/Makefile | 1 +
lib/librte_eal/common/include/rte_log.h | 1 +
lib/librte_eventdev/Makefile | 57 ++
lib/librte_eventdev/rte_eventdev.c | 986 +++++++++++++++++++++++++++
lib/librte_eventdev/rte_eventdev.h | 106 ++-
lib/librte_eventdev/rte_eventdev_pmd.h | 109 +++
lib/librte_eventdev/rte_eventdev_version.map | 33 +
mk/rte.app.mk | 1 +
9 files changed, 1294 insertions(+), 6 deletions(-)
create mode 100644 lib/librte_eventdev/Makefile
create mode 100644 lib/librte_eventdev/rte_eventdev.c
create mode 100644 lib/librte_eventdev/rte_eventdev_version.map
diff --git a/config/common_base b/config/common_base
index 47a2dc0..3a17dfb 100644
--- a/config/common_base
+++ b/config/common_base
@@ -412,6 +412,12 @@ CONFIG_RTE_LIBRTE_PMD_ZUC_DEBUG=n
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
#
+# Compile generic event device library
+#
+CONFIG_RTE_LIBRTE_EVENTDEV=y
+CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
+CONFIG_RTE_EVENT_MAX_DEVS=16
+CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
diff --git a/lib/Makefile b/lib/Makefile
index 990f23a..1a067bf 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -41,6 +41,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_CFGFILE) += librte_cfgfile
DIRS-$(CONFIG_RTE_LIBRTE_CMDLINE) += librte_cmdline
DIRS-$(CONFIG_RTE_LIBRTE_ETHER) += librte_ether
DIRS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += librte_cryptodev
+DIRS-$(CONFIG_RTE_LIBRTE_EVENTDEV) += librte_eventdev
DIRS-$(CONFIG_RTE_LIBRTE_VHOST) += librte_vhost
DIRS-$(CONFIG_RTE_LIBRTE_HASH) += librte_hash
DIRS-$(CONFIG_RTE_LIBRTE_LPM) += librte_lpm
diff --git a/lib/librte_eal/common/include/rte_log.h b/lib/librte_eal/common/include/rte_log.h
index 671e274..a6dd7c8 100644
--- a/lib/librte_eal/common/include/rte_log.h
+++ b/lib/librte_eal/common/include/rte_log.h
@@ -79,6 +79,7 @@ extern struct rte_logs rte_logs;
#define RTE_LOGTYPE_PIPELINE 0x00008000 /**< Log related to pipeline. */
#define RTE_LOGTYPE_MBUF 0x00010000 /**< Log related to mbuf. */
#define RTE_LOGTYPE_CRYPTODEV 0x00020000 /**< Log related to cryptodev. */
+#define RTE_LOGTYPE_EVENTDEV 0x00040000 /**< Log related to eventdev. */
/* these log types can be used in an application */
#define RTE_LOGTYPE_USER1 0x01000000 /**< User-defined log type 1. */
diff --git a/lib/librte_eventdev/Makefile b/lib/librte_eventdev/Makefile
new file mode 100644
index 0000000..dac0663
--- /dev/null
+++ b/lib/librte_eventdev/Makefile
@@ -0,0 +1,57 @@
+# BSD LICENSE
+#
+# Copyright(c) 2016 Cavium networks. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Cavium networks nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# library name
+LIB = librte_eventdev.a
+
+# library version
+LIBABIVER := 1
+
+# build flags
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+
+# library source files
+SRCS-y += rte_eventdev.c
+
+# export include files
+SYMLINK-y-include += rte_eventdev.h
+SYMLINK-y-include += rte_eventdev_pmd.h
+
+# versioning export map
+EXPORT_MAP := rte_eventdev_version.map
+
+# library dependencies
+DEPDIRS-y += lib/librte_eal
+DEPDIRS-y += lib/librte_mbuf
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_eventdev/rte_eventdev.c b/lib/librte_eventdev/rte_eventdev.c
new file mode 100644
index 0000000..b13eb00
--- /dev/null
+++ b/lib/librte_eventdev/rte_eventdev.c
@@ -0,0 +1,986 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 Cavium networks. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Cavium networks nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <ctype.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdarg.h>
+#include <errno.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <sys/types.h>
+#include <sys/queue.h>
+
+#include <rte_byteorder.h>
+#include <rte_log.h>
+#include <rte_debug.h>
+#include <rte_dev.h>
+#include <rte_pci.h>
+#include <rte_memory.h>
+#include <rte_memcpy.h>
+#include <rte_memzone.h>
+#include <rte_eal.h>
+#include <rte_per_lcore.h>
+#include <rte_lcore.h>
+#include <rte_atomic.h>
+#include <rte_branch_prediction.h>
+#include <rte_common.h>
+#include <rte_malloc.h>
+#include <rte_errno.h>
+
+#include "rte_eventdev.h"
+#include "rte_eventdev_pmd.h"
+
+struct rte_eventdev rte_event_devices[RTE_EVENT_MAX_DEVS];
+
+struct rte_eventdev *rte_eventdevs = &rte_event_devices[0];
+
+static struct rte_eventdev_global eventdev_globals = {
+ .nb_devs = 0
+};
+
+struct rte_eventdev_global *rte_eventdev_globals = &eventdev_globals;
+
+/* Event dev north bound API implementation */
+
+uint8_t
+rte_event_dev_count(void)
+{
+ return rte_eventdev_globals->nb_devs;
+}
+
+int
+rte_event_dev_get_dev_id(const char *name)
+{
+ int i;
+
+ if (!name)
+ return -EINVAL;
+
+ for (i = 0; i < rte_eventdev_globals->nb_devs; i++)
+ if ((strcmp(rte_event_devices[i].data->name, name)
+ == 0) &&
+ (rte_event_devices[i].attached ==
+ RTE_EVENTDEV_ATTACHED))
+ return i;
+ return -ENODEV;
+}
+
+int
+rte_event_dev_socket_id(uint8_t dev_id)
+{
+ struct rte_eventdev *dev;
+
+ RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+ dev = &rte_eventdevs[dev_id];
+
+ return dev->data->socket_id;
+}
+
+int
+rte_event_dev_info_get(uint8_t dev_id, struct rte_event_dev_info *dev_info)
+{
+ struct rte_eventdev *dev;
+
+ RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+ dev = &rte_eventdevs[dev_id];
+
+ if (dev_info == NULL)
+ return -EINVAL;
+
+ memset(dev_info, 0, sizeof(struct rte_event_dev_info));
+
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_infos_get, -ENOTSUP);
+ (*dev->dev_ops->dev_infos_get)(dev, dev_info);
+
+ dev_info->dequeue_timeout_ns = dev->data->dev_conf.dequeue_timeout_ns;
+
+ dev_info->pci_dev = dev->pci_dev;
+ return 0;
+}
+
+static inline int
+rte_event_dev_queue_config(struct rte_eventdev *dev, uint8_t nb_queues)
+{
+ uint8_t old_nb_queues = dev->data->nb_queues;
+ uint8_t *queues_prio;
+ unsigned int i;
+
+ RTE_EDEV_LOG_DEBUG("Setup %d queues on device %u", nb_queues,
+ dev->data->dev_id);
+
+ /* First time configuration */
+ if (dev->data->queues_prio == NULL && nb_queues != 0) {
+ /* Allocate memory to store queue priority */
+ dev->data->queues_prio = rte_zmalloc_socket(
+ "eventdev->data->queues_prio",
+ sizeof(dev->data->queues_prio[0]) * nb_queues,
+ RTE_CACHE_LINE_SIZE, dev->data->socket_id);
+ if (dev->data->queues_prio == NULL) {
+ dev->data->nb_queues = 0;
+ RTE_EDEV_LOG_ERR("failed to get mem for queue priority,"
+ "nb_queues %u", nb_queues);
+ return -(ENOMEM);
+ }
+ /* Re-configure */
+ } else if (dev->data->queues_prio != NULL && nb_queues != 0) {
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->queue_release, -ENOTSUP);
+
+ for (i = nb_queues; i < old_nb_queues; i++)
+ (*dev->dev_ops->queue_release)(dev, i);
+
+ /* Re allocate memory to store queue priority */
+ queues_prio = dev->data->queues_prio;
+ queues_prio = rte_realloc(queues_prio,
+ sizeof(queues_prio[0]) * nb_queues,
+ RTE_CACHE_LINE_SIZE);
+ if (queues_prio == NULL) {
+ RTE_EDEV_LOG_ERR("failed to realloc queue priority,"
+ " nb_queues %u", nb_queues);
+ return -(ENOMEM);
+ }
+ dev->data->queues_prio = queues_prio;
+
+ if (nb_queues > old_nb_queues) {
+ uint8_t new_qs = nb_queues - old_nb_queues;
+
+ memset(queues_prio + old_nb_queues, 0,
+ sizeof(queues_prio[0]) * new_qs);
+ }
+ } else if (dev->data->queues_prio != NULL && nb_queues == 0) {
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->queue_release, -ENOTSUP);
+
+ for (i = nb_queues; i < old_nb_queues; i++)
+ (*dev->dev_ops->queue_release)(dev, i);
+ }
+
+ dev->data->nb_queues = nb_queues;
+ return 0;
+}
+
+static inline int
+rte_event_dev_port_config(struct rte_eventdev *dev, uint8_t nb_ports)
+{
+ uint8_t old_nb_ports = dev->data->nb_ports;
+ void **ports;
+ uint16_t *links_map;
+ uint8_t *ports_dequeue_depth;
+ uint8_t *ports_enqueue_depth;
+ unsigned int i;
+
+ RTE_EDEV_LOG_DEBUG("Setup %d ports on device %u", nb_ports,
+ dev->data->dev_id);
+
+ /* First time configuration */
+ if (dev->data->ports == NULL && nb_ports != 0) {
+ dev->data->ports = rte_zmalloc_socket("eventdev->data->ports",
+ sizeof(dev->data->ports[0]) * nb_ports,
+ RTE_CACHE_LINE_SIZE, dev->data->socket_id);
+ if (dev->data->ports == NULL) {
+ dev->data->nb_ports = 0;
+ RTE_EDEV_LOG_ERR("failed to get mem for port meta data,"
+ "nb_ports %u", nb_ports);
+ return -(ENOMEM);
+ }
+
+ /* Allocate memory to store ports dequeue depth */
+ dev->data->ports_dequeue_depth =
+ rte_zmalloc_socket("eventdev->ports_dequeue_depth",
+ sizeof(dev->data->ports_dequeue_depth[0]) * nb_ports,
+ RTE_CACHE_LINE_SIZE, dev->data->socket_id);
+ if (dev->data->ports_dequeue_depth == NULL) {
+ dev->data->nb_ports = 0;
+ RTE_EDEV_LOG_ERR("failed to get mem for port deq meta,"
+ "nb_ports %u", nb_ports);
+ return -(ENOMEM);
+ }
+
+ /* Allocate memory to store ports enqueue depth */
+ dev->data->ports_enqueue_depth =
+ rte_zmalloc_socket("eventdev->ports_enqueue_depth",
+ sizeof(dev->data->ports_enqueue_depth[0]) * nb_ports,
+ RTE_CACHE_LINE_SIZE, dev->data->socket_id);
+ if (dev->data->ports_enqueue_depth == NULL) {
+ dev->data->nb_ports = 0;
+ RTE_EDEV_LOG_ERR("failed to get mem for port enq meta,"
+ "nb_ports %u", nb_ports);
+ return -(ENOMEM);
+ }
+
+ /* Allocate memory to store queue to port link connection */
+ dev->data->links_map =
+ rte_zmalloc_socket("eventdev->links_map",
+ sizeof(dev->data->links_map[0]) * nb_ports *
+ RTE_EVENT_MAX_QUEUES_PER_DEV,
+ RTE_CACHE_LINE_SIZE, dev->data->socket_id);
+ if (dev->data->links_map == NULL) {
+ dev->data->nb_ports = 0;
+ RTE_EDEV_LOG_ERR("failed to get mem for port_map area,"
+ "nb_ports %u", nb_ports);
+ return -(ENOMEM);
+ }
+ } else if (dev->data->ports != NULL && nb_ports != 0) {/* re-config */
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->port_release, -ENOTSUP);
+
+ ports = dev->data->ports;
+ ports_dequeue_depth = dev->data->ports_dequeue_depth;
+ ports_enqueue_depth = dev->data->ports_enqueue_depth;
+ links_map = dev->data->links_map;
+
+ for (i = nb_ports; i < old_nb_ports; i++)
+ (*dev->dev_ops->port_release)(ports[i]);
+
+ /* Realloc memory for ports */
+ ports = rte_realloc(ports, sizeof(ports[0]) * nb_ports,
+ RTE_CACHE_LINE_SIZE);
+ if (ports == NULL) {
+ RTE_EDEV_LOG_ERR("failed to realloc port meta data,"
+ " nb_ports %u", nb_ports);
+ return -(ENOMEM);
+ }
+
+ /* Realloc memory for ports_dequeue_depth */
+ ports_dequeue_depth = rte_realloc(ports_dequeue_depth,
+ sizeof(ports_dequeue_depth[0]) * nb_ports,
+ RTE_CACHE_LINE_SIZE);
+ if (ports_dequeue_depth == NULL) {
+ RTE_EDEV_LOG_ERR("failed to realloc port dequeue meta,"
+ " nb_ports %u", nb_ports);
+ return -(ENOMEM);
+ }
+
+ /* Realloc memory for ports_enqueue_depth */
+ ports_enqueue_depth = rte_realloc(ports_enqueue_depth,
+ sizeof(ports_enqueue_depth[0]) * nb_ports,
+ RTE_CACHE_LINE_SIZE);
+ if (ports_enqueue_depth == NULL) {
+ RTE_EDEV_LOG_ERR("failed to realloc port enqueue meta,"
+ " nb_ports %u", nb_ports);
+ return -(ENOMEM);
+ }
+
+ /* Realloc memory to store queue to port link connection */
+ links_map = rte_realloc(links_map,
+ sizeof(dev->data->links_map[0]) * nb_ports *
+ RTE_EVENT_MAX_QUEUES_PER_DEV,
+ RTE_CACHE_LINE_SIZE);
+ if (dev->data->links_map == NULL) {
+ dev->data->nb_ports = 0;
+ RTE_EDEV_LOG_ERR("failed to realloc mem for port_map,"
+ "nb_ports %u", nb_ports);
+ return -(ENOMEM);
+ }
+
+ if (nb_ports > old_nb_ports) {
+ uint8_t new_ps = nb_ports - old_nb_ports;
+
+ memset(ports + old_nb_ports, 0,
+ sizeof(ports[0]) * new_ps);
+ memset(ports_dequeue_depth + old_nb_ports, 0,
+ sizeof(ports_dequeue_depth[0]) * new_ps);
+ memset(ports_enqueue_depth + old_nb_ports, 0,
+ sizeof(ports_enqueue_depth[0]) * new_ps);
+ memset(links_map +
+ (old_nb_ports * RTE_EVENT_MAX_QUEUES_PER_DEV),
+ 0, sizeof(ports_enqueue_depth[0]) * new_ps);
+ }
+
+ dev->data->ports = ports;
+ dev->data->ports_dequeue_depth = ports_dequeue_depth;
+ dev->data->ports_enqueue_depth = ports_enqueue_depth;
+ dev->data->links_map = links_map;
+ } else if (dev->data->ports != NULL && nb_ports == 0) {
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->port_release, -ENOTSUP);
+
+ ports = dev->data->ports;
+ for (i = nb_ports; i < old_nb_ports; i++)
+ (*dev->dev_ops->port_release)(ports[i]);
+ }
+
+ dev->data->nb_ports = nb_ports;
+ return 0;
+}
+
+int
+rte_event_dev_configure(uint8_t dev_id,
+ const struct rte_event_dev_config *dev_conf)
+{
+ struct rte_eventdev *dev;
+ struct rte_event_dev_info info;
+ int diag;
+
+ RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+ dev = &rte_eventdevs[dev_id];
+
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_infos_get, -ENOTSUP);
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_configure, -ENOTSUP);
+
+ if (dev->data->dev_started) {
+ RTE_EDEV_LOG_ERR(
+ "device %d must be stopped to allow configuration", dev_id);
+ return -EBUSY;
+ }
+
+ if (dev_conf == NULL)
+ return -EINVAL;
+
+ (*dev->dev_ops->dev_infos_get)(dev, &info);
+
+ /* Check dequeue_timeout_ns value is in limit */
+ if (!dev_conf->event_dev_cfg & RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT) {
+ if (dev_conf->dequeue_timeout_ns < info.min_dequeue_timeout_ns
+ || dev_conf->dequeue_timeout_ns >
+ info.max_dequeue_timeout_ns) {
+ RTE_EDEV_LOG_ERR("dev%d invalid dequeue_timeout_ns=%d"
+ " min_dequeue_timeout_ns=%d max_dequeue_timeout_ns=%d",
+ dev_id, dev_conf->dequeue_timeout_ns,
+ info.min_dequeue_timeout_ns,
+ info.max_dequeue_timeout_ns);
+ return -EINVAL;
+ }
+ }
+
+ /* Check nb_events_limit is in limit */
+ if (dev_conf->nb_events_limit > info.max_num_events) {
+ RTE_EDEV_LOG_ERR("dev%d nb_events_limit=%d > max_num_events=%d",
+ dev_id, dev_conf->nb_events_limit, info.max_num_events);
+ return -EINVAL;
+ }
+
+ /* Check nb_event_queues is in limit */
+ if (!dev_conf->nb_event_queues) {
+ RTE_EDEV_LOG_ERR("dev%d nb_event_queues cannot be zero",
+ dev_id);
+ return -EINVAL;
+ }
+ if (dev_conf->nb_event_queues > info.max_event_queues) {
+ RTE_EDEV_LOG_ERR("%d nb_event_queues=%d > max_event_queues=%d",
+ dev_id, dev_conf->nb_event_queues, info.max_event_queues);
+ return -EINVAL;
+ }
+
+ /* Check nb_event_ports is in limit */
+ if (!dev_conf->nb_event_ports) {
+ RTE_EDEV_LOG_ERR("dev%d nb_event_ports cannot be zero", dev_id);
+ return -EINVAL;
+ }
+ if (dev_conf->nb_event_ports > info.max_event_ports) {
+ RTE_EDEV_LOG_ERR("id%d nb_event_ports=%d > max_event_ports= %d",
+ dev_id, dev_conf->nb_event_ports, info.max_event_ports);
+ return -EINVAL;
+ }
+
+ /* Check nb_event_queue_flows is in limit */
+ if (!dev_conf->nb_event_queue_flows) {
+ RTE_EDEV_LOG_ERR("dev%d nb_flows cannot be zero", dev_id);
+ return -EINVAL;
+ }
+ if (dev_conf->nb_event_queue_flows > info.max_event_queue_flows) {
+ RTE_EDEV_LOG_ERR("dev%d nb_flows=%x > max_flows=%x",
+ dev_id, dev_conf->nb_event_queue_flows,
+ info.max_event_queue_flows);
+ return -EINVAL;
+ }
+
+ /* Check nb_event_port_dequeue_depth is in limit */
+ if (!dev_conf->nb_event_port_dequeue_depth) {
+ RTE_EDEV_LOG_ERR("dev%d nb_dequeue_depth cannot be zero",
+ dev_id);
+ return -EINVAL;
+ }
+ if (dev_conf->nb_event_port_dequeue_depth >
+ info.max_event_port_dequeue_depth) {
+ RTE_EDEV_LOG_ERR("dev%d nb_dq_depth=%d > max_dq_depth=%d",
+ dev_id, dev_conf->nb_event_port_dequeue_depth,
+ info.max_event_port_dequeue_depth);
+ return -EINVAL;
+ }
+
+ /* Check nb_event_port_enqueue_depth is in limit */
+ if (!dev_conf->nb_event_port_enqueue_depth) {
+ RTE_EDEV_LOG_ERR("dev%d nb_enqueue_depth cannot be zero",
+ dev_id);
+ return -EINVAL;
+ }
+ if (dev_conf->nb_event_port_enqueue_depth >
+ info.max_event_port_enqueue_depth) {
+ RTE_EDEV_LOG_ERR("dev%d nb_enq_depth=%d > max_enq_depth=%d",
+ dev_id, dev_conf->nb_event_port_enqueue_depth,
+ info.max_event_port_enqueue_depth);
+ return -EINVAL;
+ }
+
+ /* Copy the dev_conf parameter into the dev structure */
+ memcpy(&dev->data->dev_conf, dev_conf, sizeof(dev->data->dev_conf));
+
+ /* Setup new number of queues and reconfigure device. */
+ diag = rte_event_dev_queue_config(dev, dev_conf->nb_event_queues);
+ if (diag != 0) {
+ RTE_EDEV_LOG_ERR("dev%d rte_event_dev_queue_config = %d",
+ dev_id, diag);
+ return diag;
+ }
+
+ /* Setup new number of ports and reconfigure device. */
+ diag = rte_event_dev_port_config(dev, dev_conf->nb_event_ports);
+ if (diag != 0) {
+ rte_event_dev_queue_config(dev, 0);
+ RTE_EDEV_LOG_ERR("dev%d rte_event_dev_port_config = %d",
+ dev_id, diag);
+ return diag;
+ }
+
+ /* Configure the device */
+ diag = (*dev->dev_ops->dev_configure)(dev);
+ if (diag != 0) {
+ RTE_EDEV_LOG_ERR("dev%d dev_configure = %d", dev_id, diag);
+ rte_event_dev_queue_config(dev, 0);
+ rte_event_dev_port_config(dev, 0);
+ }
+
+ dev->data->event_dev_cap = info.event_dev_cap;
+ return diag;
+}
+
+static inline int
+is_valid_queue(struct rte_eventdev *dev, uint8_t queue_id)
+{
+ if (queue_id < dev->data->nb_queues && queue_id <
+ RTE_EVENT_MAX_QUEUES_PER_DEV)
+ return 1;
+ else
+ return 0;
+}
+
+int
+rte_event_queue_default_conf_get(uint8_t dev_id, uint8_t queue_id,
+ struct rte_event_queue_conf *queue_conf)
+{
+ struct rte_eventdev *dev;
+
+ RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+ dev = &rte_eventdevs[dev_id];
+
+ if (queue_conf == NULL)
+ return -EINVAL;
+
+ if (!is_valid_queue(dev, queue_id)) {
+ RTE_EDEV_LOG_ERR("Invalid queue_id=%" PRIu8, queue_id);
+ return -EINVAL;
+ }
+
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->queue_def_conf, -ENOTSUP);
+ memset(queue_conf, 0, sizeof(struct rte_event_queue_conf));
+ (*dev->dev_ops->queue_def_conf)(dev, queue_id, queue_conf);
+ return 0;
+}
+
+static inline int
+is_valid_atomic_queue_conf(const struct rte_event_queue_conf *queue_conf)
+{
+ if (queue_conf && (
+ ((queue_conf->event_queue_cfg &
+ RTE_EVENT_QUEUE_CFG_TYPE_MASK)
+ == RTE_EVENT_QUEUE_CFG_ALL_TYPES) ||
+ ((queue_conf->event_queue_cfg &
+ RTE_EVENT_QUEUE_CFG_TYPE_MASK)
+ == RTE_EVENT_QUEUE_CFG_ATOMIC_ONLY)
+ ))
+ return 1;
+ else
+ return 0;
+}
+
+static inline int
+is_valid_ordered_queue_conf(const struct rte_event_queue_conf *queue_conf)
+{
+ if (queue_conf && (
+ ((queue_conf->event_queue_cfg &
+ RTE_EVENT_QUEUE_CFG_TYPE_MASK)
+ == RTE_EVENT_QUEUE_CFG_ALL_TYPES) ||
+ ((queue_conf->event_queue_cfg &
+ RTE_EVENT_QUEUE_CFG_TYPE_MASK)
+ == RTE_EVENT_QUEUE_CFG_ORDERED_ONLY)
+ ))
+ return 1;
+ else
+ return 0;
+}
+
+
+int
+rte_event_queue_setup(uint8_t dev_id, uint8_t queue_id,
+ const struct rte_event_queue_conf *queue_conf)
+{
+ struct rte_eventdev *dev;
+ struct rte_event_queue_conf def_conf;
+
+ RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+ dev = &rte_eventdevs[dev_id];
+
+ if (!is_valid_queue(dev, queue_id)) {
+ RTE_EDEV_LOG_ERR("Invalid queue_id=%" PRIu8, queue_id);
+ return -EINVAL;
+ }
+
+ /* Check nb_atomic_flows limit */
+ if (is_valid_atomic_queue_conf(queue_conf)) {
+ if (queue_conf->nb_atomic_flows == 0 ||
+ queue_conf->nb_atomic_flows >
+ dev->data->dev_conf.nb_event_queue_flows) {
+ RTE_EDEV_LOG_ERR(
+ "dev%d queue%d Invalid nb_atomic_flows=%d max_flows=%d",
+ dev_id, queue_id, queue_conf->nb_atomic_flows,
+ dev->data->dev_conf.nb_event_queue_flows);
+ return -EINVAL;
+ }
+ }
+
+ /* Check nb_atomic_order_sequences limit */
+ if (is_valid_ordered_queue_conf(queue_conf)) {
+ if (queue_conf->nb_atomic_order_sequences == 0 ||
+ queue_conf->nb_atomic_order_sequences >
+ dev->data->dev_conf.nb_event_queue_flows) {
+ RTE_EDEV_LOG_ERR(
+ "dev%d queue%d Invalid nb_atomic_order_seq=%d max_flows=%d",
+ dev_id, queue_id, queue_conf->nb_atomic_order_sequences,
+ dev->data->dev_conf.nb_event_queue_flows);
+ return -EINVAL;
+ }
+ }
+
+ if (dev->data->dev_started) {
+ RTE_EDEV_LOG_ERR(
+ "device %d must be stopped to allow queue setup", dev_id);
+ return -EBUSY;
+ }
+
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->queue_setup, -ENOTSUP);
+
+ if (queue_conf == NULL) {
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->queue_def_conf,
+ -ENOTSUP);
+ (*dev->dev_ops->queue_def_conf)(dev, queue_id, &def_conf);
+ def_conf.event_queue_cfg = RTE_EVENT_QUEUE_CFG_DEFAULT;
+ queue_conf = &def_conf;
+ }
+
+ dev->data->queues_prio[queue_id] = queue_conf->priority;
+ return (*dev->dev_ops->queue_setup)(dev, queue_id, queue_conf);
+}
+
+uint8_t
+rte_event_queue_count(uint8_t dev_id)
+{
+ struct rte_eventdev *dev;
+
+ dev = &rte_eventdevs[dev_id];
+ return dev->data->nb_queues;
+}
+
+uint8_t
+rte_event_queue_priority(uint8_t dev_id, uint8_t queue_id)
+{
+ struct rte_eventdev *dev;
+
+ dev = &rte_eventdevs[dev_id];
+ if (dev->data->event_dev_cap & RTE_EVENT_DEV_CAP_QUEUE_QOS)
+ return dev->data->queues_prio[queue_id];
+ else
+ return RTE_EVENT_DEV_PRIORITY_NORMAL;
+}
+
+static inline int
+is_valid_port(struct rte_eventdev *dev, uint8_t port_id)
+{
+ if (port_id < dev->data->nb_ports)
+ return 1;
+ else
+ return 0;
+}
+
+int
+rte_event_port_default_conf_get(uint8_t dev_id, uint8_t port_id,
+ struct rte_event_port_conf *port_conf)
+{
+ struct rte_eventdev *dev;
+
+ RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+ dev = &rte_eventdevs[dev_id];
+
+ if (port_conf == NULL)
+ return -EINVAL;
+
+ if (!is_valid_port(dev, port_id)) {
+ RTE_EDEV_LOG_ERR("Invalid port_id=%" PRIu8, port_id);
+ return -EINVAL;
+ }
+
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->port_def_conf, -ENOTSUP);
+ memset(port_conf, 0, sizeof(struct rte_event_port_conf));
+ (*dev->dev_ops->port_def_conf)(dev, port_id, port_conf);
+ return 0;
+}
+
+int
+rte_event_port_setup(uint8_t dev_id, uint8_t port_id,
+ const struct rte_event_port_conf *port_conf)
+{
+ struct rte_eventdev *dev;
+ struct rte_event_port_conf def_conf;
+ int diag;
+
+ RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+ dev = &rte_eventdevs[dev_id];
+
+ if (!is_valid_port(dev, port_id)) {
+ RTE_EDEV_LOG_ERR("Invalid port_id=%" PRIu8, port_id);
+ return -EINVAL;
+ }
+
+ /* Check new_event_threshold limit */
+ if ((port_conf && !port_conf->new_event_threshold) ||
+ (port_conf && port_conf->new_event_threshold >
+ dev->data->dev_conf.nb_events_limit)) {
+ RTE_EDEV_LOG_ERR(
+ "dev%d port%d Invalid event_threshold=%d nb_events_limit=%d",
+ dev_id, port_id, port_conf->new_event_threshold,
+ dev->data->dev_conf.nb_events_limit);
+ return -EINVAL;
+ }
+
+ /* Check dequeue_depth limit */
+ if ((port_conf && !port_conf->dequeue_depth) ||
+ (port_conf && port_conf->dequeue_depth >
+ dev->data->dev_conf.nb_event_port_dequeue_depth)) {
+ RTE_EDEV_LOG_ERR(
+ "dev%d port%d Invalid dequeue depth=%d max_dequeue_depth=%d",
+ dev_id, port_id, port_conf->dequeue_depth,
+ dev->data->dev_conf.nb_event_port_dequeue_depth);
+ return -EINVAL;
+ }
+
+ /* Check enqueue_depth limit */
+ if ((port_conf && !port_conf->enqueue_depth) ||
+ (port_conf && port_conf->enqueue_depth >
+ dev->data->dev_conf.nb_event_port_enqueue_depth)) {
+ RTE_EDEV_LOG_ERR(
+ "dev%d port%d Invalid enqueue depth=%d max_enqueue_depth=%d",
+ dev_id, port_id, port_conf->enqueue_depth,
+ dev->data->dev_conf.nb_event_port_enqueue_depth);
+ return -EINVAL;
+ }
+
+ if (dev->data->dev_started) {
+ RTE_EDEV_LOG_ERR(
+ "device %d must be stopped to allow port setup", dev_id);
+ return -EBUSY;
+ }
+
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->port_setup, -ENOTSUP);
+
+ if (port_conf == NULL) {
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->port_def_conf,
+ -ENOTSUP);
+ (*dev->dev_ops->port_def_conf)(dev, port_id, &def_conf);
+ port_conf = &def_conf;
+ }
+
+ dev->data->ports_dequeue_depth[port_id] =
+ port_conf->dequeue_depth;
+ dev->data->ports_enqueue_depth[port_id] =
+ port_conf->enqueue_depth;
+
+ diag = (*dev->dev_ops->port_setup)(dev, port_id, port_conf);
+
+ /* Unlink all the queues from this port(default state after setup) */
+ if (!diag)
+ diag = rte_event_port_unlink(dev_id, port_id, NULL, 0);
+
+ if (diag < 0)
+ return diag;
+
+ return 0;
+}
+
+uint8_t
+rte_event_port_dequeue_depth(uint8_t dev_id, uint8_t port_id)
+{
+ struct rte_eventdev *dev;
+
+ dev = &rte_eventdevs[dev_id];
+ return dev->data->ports_dequeue_depth[port_id];
+}
+
+uint8_t
+rte_event_port_enqueue_depth(uint8_t dev_id, uint8_t port_id)
+{
+ struct rte_eventdev *dev;
+
+ dev = &rte_eventdevs[dev_id];
+ return dev->data->ports_enqueue_depth[port_id];
+}
+
+uint8_t
+rte_event_port_count(uint8_t dev_id)
+{
+ struct rte_eventdev *dev;
+
+ dev = &rte_eventdevs[dev_id];
+ return dev->data->nb_ports;
+}
+
+int
+rte_event_port_link(uint8_t dev_id, uint8_t port_id,
+ const uint8_t queues[], const uint8_t priorities[],
+ uint16_t nb_links)
+{
+ struct rte_eventdev *dev;
+ uint8_t queues_list[RTE_EVENT_MAX_QUEUES_PER_DEV];
+ uint8_t priorities_list[RTE_EVENT_MAX_QUEUES_PER_DEV];
+ uint16_t *links_map;
+ int i, diag;
+
+ RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+ dev = &rte_eventdevs[dev_id];
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->port_link, -ENOTSUP);
+
+ if (!is_valid_port(dev, port_id)) {
+ RTE_EDEV_LOG_ERR("Invalid port_id=%" PRIu8, port_id);
+ return -EINVAL;
+ }
+
+ if (queues == NULL) {
+ for (i = 0; i < dev->data->nb_queues; i++)
+ queues_list[i] = i;
+
+ queues = queues_list;
+ nb_links = dev->data->nb_queues;
+ }
+
+ if (priorities == NULL) {
+ for (i = 0; i < nb_links; i++)
+ priorities_list[i] = RTE_EVENT_DEV_PRIORITY_NORMAL;
+
+ priorities = priorities_list;
+ }
+
+ for (i = 0; i < nb_links; i++)
+ if (queues[i] >= RTE_EVENT_MAX_QUEUES_PER_DEV)
+ return -EINVAL;
+
+ diag = (*dev->dev_ops->port_link)(dev->data->ports[port_id], queues,
+ priorities, nb_links);
+ if (diag < 0)
+ return diag;
+
+ links_map = dev->data->links_map;
+ /* Point links_map to this port specific area */
+ links_map += (port_id * RTE_EVENT_MAX_QUEUES_PER_DEV);
+ for (i = 0; i < diag; i++)
+ links_map[queues[i]] = (uint8_t)priorities[i];
+
+ return diag;
+}
+
+#define EVENT_QUEUE_SERVICE_PRIORITY_INVALID (0xdead)
+
+int
+rte_event_port_unlink(uint8_t dev_id, uint8_t port_id,
+ uint8_t queues[], uint16_t nb_unlinks)
+{
+ struct rte_eventdev *dev;
+ uint8_t all_queues[RTE_EVENT_MAX_QUEUES_PER_DEV];
+ int i, diag;
+ uint16_t *links_map;
+
+ RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+ dev = &rte_eventdevs[dev_id];
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->port_unlink, -ENOTSUP);
+
+ if (!is_valid_port(dev, port_id)) {
+ RTE_EDEV_LOG_ERR("Invalid port_id=%" PRIu8, port_id);
+ return -EINVAL;
+ }
+
+ if (queues == NULL) {
+ for (i = 0; i < dev->data->nb_queues; i++)
+ all_queues[i] = i;
+ queues = all_queues;
+ nb_unlinks = dev->data->nb_queues;
+ }
+
+ for (i = 0; i < nb_unlinks; i++)
+ if (queues[i] >= RTE_EVENT_MAX_QUEUES_PER_DEV)
+ return -EINVAL;
+
+ diag = (*dev->dev_ops->port_unlink)(dev->data->ports[port_id], queues,
+ nb_unlinks);
+
+ if (diag < 0)
+ return diag;
+
+ links_map = dev->data->links_map;
+ /* Point links_map to this port specific area */
+ links_map += (port_id * RTE_EVENT_MAX_QUEUES_PER_DEV);
+ for (i = 0; i < diag; i++)
+ links_map[queues[i]] = EVENT_QUEUE_SERVICE_PRIORITY_INVALID;
+
+ return diag;
+}
+
+int
+rte_event_port_links_get(uint8_t dev_id, uint8_t port_id,
+ uint8_t queues[], uint8_t priorities[])
+{
+ struct rte_eventdev *dev;
+ uint16_t *links_map;
+ int i, count = 0;
+
+ RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+ dev = &rte_eventdevs[dev_id];
+ if (!is_valid_port(dev, port_id)) {
+ RTE_EDEV_LOG_ERR("Invalid port_id=%" PRIu8, port_id);
+ return -EINVAL;
+ }
+
+ links_map = dev->data->links_map;
+ /* Point links_map to this port specific area */
+ links_map += (port_id * RTE_EVENT_MAX_QUEUES_PER_DEV);
+ for (i = 0; i < RTE_EVENT_MAX_QUEUES_PER_DEV; i++) {
+ if (links_map[i] != EVENT_QUEUE_SERVICE_PRIORITY_INVALID) {
+ queues[count] = i;
+ priorities[count] = (uint8_t)links_map[i];
+ ++count;
+ }
+ }
+ return count;
+}
+
+int
+rte_event_dequeue_timeout_ticks(uint8_t dev_id, uint64_t ns,
+ uint64_t *timeout_ticks)
+{
+ struct rte_eventdev *dev;
+
+ RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+ dev = &rte_eventdevs[dev_id];
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->timeout_ticks, -ENOTSUP);
+
+ if (timeout_ticks == NULL)
+ return -EINVAL;
+
+ (*dev->dev_ops->timeout_ticks)(dev, ns, timeout_ticks);
+ return 0;
+}
+
+int
+rte_event_dev_dump(uint8_t dev_id, FILE *f)
+{
+ struct rte_eventdev *dev;
+
+ RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+ dev = &rte_eventdevs[dev_id];
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dump, -ENOTSUP);
+
+ (*dev->dev_ops->dump)(dev, f);
+ return 0;
+
+}
+
+int
+rte_event_dev_start(uint8_t dev_id)
+{
+ struct rte_eventdev *dev;
+ int diag;
+
+ RTE_EDEV_LOG_DEBUG("Start dev_id=%" PRIu8, dev_id);
+
+ RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+ dev = &rte_eventdevs[dev_id];
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_start, -ENOTSUP);
+
+ if (dev->data->dev_started != 0) {
+ RTE_EDEV_LOG_ERR("Device with dev_id=%" PRIu8 "already started",
+ dev_id);
+ return 0;
+ }
+
+ diag = (*dev->dev_ops->dev_start)(dev);
+ if (diag == 0)
+ dev->data->dev_started = 1;
+ else
+ return diag;
+
+ return 0;
+}
+
+void
+rte_event_dev_stop(uint8_t dev_id)
+{
+ struct rte_eventdev *dev;
+
+ RTE_EDEV_LOG_DEBUG("Stop dev_id=%" PRIu8, dev_id);
+
+ RTE_EVENTDEV_VALID_DEVID_OR_RET(dev_id);
+ dev = &rte_eventdevs[dev_id];
+ RTE_FUNC_PTR_OR_RET(*dev->dev_ops->dev_stop);
+
+ if (dev->data->dev_started == 0) {
+ RTE_EDEV_LOG_ERR("Device with dev_id=%" PRIu8 "already stopped",
+ dev_id);
+ return;
+ }
+
+ dev->data->dev_started = 0;
+ (*dev->dev_ops->dev_stop)(dev);
+}
+
+int
+rte_event_dev_close(uint8_t dev_id)
+{
+ struct rte_eventdev *dev;
+
+ RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+ dev = &rte_eventdevs[dev_id];
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_close, -ENOTSUP);
+
+ /* Device must be stopped before it can be closed */
+ if (dev->data->dev_started == 1) {
+ RTE_EDEV_LOG_ERR("Device %u must be stopped before closing",
+ dev_id);
+ return -EBUSY;
+ }
+
+ return (*dev->dev_ops->dev_close)(dev);
+}
diff --git a/lib/librte_eventdev/rte_eventdev.h b/lib/librte_eventdev/rte_eventdev.h
index 014e1ec..e1bd05f 100644
--- a/lib/librte_eventdev/rte_eventdev.h
+++ b/lib/librte_eventdev/rte_eventdev.h
@@ -972,6 +972,8 @@ struct rte_event {
};
};
+
+struct rte_eventdev_driver;
struct rte_eventdev_ops;
struct rte_eventdev;
@@ -993,6 +995,49 @@ typedef uint16_t (*event_dequeue_burst_t)(void *port, struct rte_event ev[],
uint16_t nb_events, uint64_t timeout_ticks);
/**< @internal Dequeue burst of events from port of a device */
+#define RTE_EVENTDEV_NAME_MAX_LEN (64)
+/**< @internal Max length of name of event PMD */
+
+/**
+ * @internal
+ * The data part, with no function pointers, associated with each device.
+ *
+ * This structure is safe to place in shared memory to be common among
+ * different processes in a multi-process configuration.
+ */
+struct rte_eventdev_data {
+ int socket_id;
+ /**< Socket ID where memory is allocated */
+ uint8_t dev_id;
+ /**< Device ID for this instance */
+ uint8_t nb_queues;
+ /**< Number of event queues. */
+ uint8_t nb_ports;
+ /**< Number of event ports. */
+ void **ports;
+ /**< Array of pointers to ports. */
+ uint8_t *ports_dequeue_depth;
+ /**< Array of port dequeue depth. */
+ uint8_t *ports_enqueue_depth;
+ /**< Array of port enqueue depth. */
+ uint8_t *queues_prio;
+ /**< Array of queue priority. */
+ uint16_t *links_map;
+ /**< Memory to store queues to port connections. */
+ void *dev_private;
+ /**< PMD-specific private data */
+ uint32_t event_dev_cap;
+ /**< Event device capabilities(RTE_EVENT_DEV_CAP_)*/
+ struct rte_event_dev_config dev_conf;
+ /**< Configuration applied to device. */
+
+ RTE_STD_C11
+ uint8_t dev_started : 1;
+ /**< Device state: STARTED(1)/STOPPED(0) */
+
+ char name[RTE_EVENTDEV_NAME_MAX_LEN];
+ /**< Unique identifier name */
+} __rte_cache_aligned;
/** @internal The data structure associated with each event device. */
struct rte_eventdev {
@@ -1007,8 +1052,23 @@ struct rte_eventdev {
event_dequeue_burst_t dequeue_burst;
/**< Pointer to PMD dequeue burst function. */
+ struct rte_eventdev_data *data;
+ /**< Pointer to device data */
+ const struct rte_eventdev_ops *dev_ops;
+ /**< Functions exported by PMD */
+ struct rte_pci_device *pci_dev;
+ /**< PCI info. supplied by probing */
+ const struct rte_eventdev_driver *driver;
+ /**< Driver for this device */
+
+ RTE_STD_C11
+ uint8_t attached : 1;
+ /**< Flag indicating the device is attached */
} __rte_cache_aligned;
+extern struct rte_eventdev *rte_eventdevs;
+/** @internal The pool of rte_eventdev structures. */
+
/**
* Schedule one or more events in the event dev.
@@ -1019,8 +1079,13 @@ struct rte_eventdev {
* @param dev_id
* The identifier of the device.
*/
-void
-rte_event_schedule(uint8_t dev_id);
+static inline void
+rte_event_schedule(uint8_t dev_id)
+{
+ struct rte_eventdev *dev = &rte_eventdevs[dev_id];
+ if (*dev->schedule)
+ (*dev->schedule)(dev);
+}
/**
* Enqueue a burst of events objects or an event object supplied in *rte_event*
@@ -1055,9 +1120,23 @@ rte_event_schedule(uint8_t dev_id);
*
* @see rte_event_port_enqueue_depth()
*/
-uint16_t
+static inline uint16_t
rte_event_enqueue_burst(uint8_t dev_id, uint8_t port_id,
- const struct rte_event ev[], uint16_t nb_events);
+ const struct rte_event ev[], uint16_t nb_events)
+{
+ struct rte_eventdev *dev = &rte_eventdevs[dev_id];
+
+ /*
+ * Allow zero cost non burst mode routine invocation if application
+ * requests nb_events as const one
+ */
+ if (nb_events == 1)
+ return (*dev->enqueue)(
+ dev->data->ports[port_id], ev);
+ else
+ return (*dev->enqueue_burst)(
+ dev->data->ports[port_id], ev, nb_events);
+}
/**
* Converts nanoseconds to *timeout_ticks* value for rte_event_dequeue_burst()
@@ -1149,9 +1228,24 @@ rte_event_dequeue_timeout_ticks(uint8_t dev_id, uint64_t ns,
*
* @see rte_event_port_dequeue_depth()
*/
-uint16_t
+static inline uint16_t
rte_event_dequeue_burst(uint8_t dev_id, uint8_t port_id, struct rte_event ev[],
- uint16_t nb_events, uint64_t timeout_ticks);
+ uint16_t nb_events, uint64_t timeout_ticks)
+{
+ struct rte_eventdev *dev = &rte_eventdevs[dev_id];
+
+ /*
+ * Allow zero cost non burst mode routine invocation if application
+ * requests nb_events as const one
+ */
+ if (nb_events == 1)
+ return (*dev->dequeue)(
+ dev->data->ports[port_id], ev, timeout_ticks);
+ else
+ return (*dev->dequeue_burst)(
+ dev->data->ports[port_id], ev, nb_events,
+ timeout_ticks);
+}
/**
* Link multiple source event queues supplied in *queues* to the destination
diff --git a/lib/librte_eventdev/rte_eventdev_pmd.h b/lib/librte_eventdev/rte_eventdev_pmd.h
index 40552aa..e60eca9 100644
--- a/lib/librte_eventdev/rte_eventdev_pmd.h
+++ b/lib/librte_eventdev/rte_eventdev_pmd.h
@@ -44,8 +44,117 @@
extern "C" {
#endif
+#include <string.h>
+
+#include <rte_dev.h>
+#include <rte_pci.h>
+#include <rte_malloc.h>
+#include <rte_log.h>
+#include <rte_common.h>
+
#include "rte_eventdev.h"
+#ifdef RTE_LIBRTE_EVENTDEV_DEBUG
+#define RTE_PMD_DEBUG_TRACE(...) \
+ rte_pmd_debug_trace(__func__, __VA_ARGS__)
+#else
+#define RTE_PMD_DEBUG_TRACE(...)
+#endif
+
+/* Logging Macros */
+#define RTE_EDEV_LOG_ERR(fmt, args...) \
+ RTE_LOG(ERR, EVENTDEV, "%s() line %u: " fmt "\n", \
+ __func__, __LINE__, ## args)
+
+#ifdef RTE_LIBRTE_EVENTDEV_DEBUG
+#define RTE_EDEV_LOG_DEBUG(fmt, args...) \
+ RTE_LOG(DEBUG, EVENTDEV, "%s() line %u: " fmt "\n", \
+ __func__, __LINE__, ## args)
+#else
+#define RTE_EDEV_LOG_DEBUG(fmt, args...) (void)0
+#endif
+
+/* Macros to check for valid device */
+#define RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, retval) do { \
+ if (!rte_event_pmd_is_valid_dev((dev_id))) { \
+ RTE_EDEV_LOG_ERR("Invalid dev_id=%d\n", dev_id); \
+ return retval; \
+ } \
+} while (0)
+
+#define RTE_EVENTDEV_VALID_DEVID_OR_RET(dev_id) do { \
+ if (!rte_event_pmd_is_valid_dev((dev_id))) { \
+ RTE_EDEV_LOG_ERR("Invalid dev_id=%d\n", dev_id); \
+ return; \
+ } \
+} while (0)
+
+#define RTE_EVENTDEV_DETACHED (0)
+#define RTE_EVENTDEV_ATTACHED (1)
+
+/** Global structure used for maintaining state of allocated event devices */
+struct rte_eventdev_global {
+ uint8_t nb_devs; /**< Number of devices found */
+ uint8_t max_devs; /**< Max number of devices */
+};
+
+extern struct rte_eventdev_global *rte_eventdev_globals;
+/** Pointer to global event devices data structure. */
+extern struct rte_eventdev *rte_eventdevs;
+/** The pool of rte_eventdev structures. */
+
+/**
+ * Get the rte_eventdev structure device pointer for the named device.
+ *
+ * @param name
+ * device name to select the device structure.
+ *
+ * @return
+ * - The rte_eventdev structure pointer for the given device ID.
+ */
+static inline struct rte_eventdev *
+rte_event_pmd_get_named_dev(const char *name)
+{
+ struct rte_eventdev *dev;
+ unsigned int i;
+
+ if (name == NULL)
+ return NULL;
+
+ for (i = 0, dev = &rte_eventdevs[i];
+ i < rte_eventdev_globals->max_devs; i++) {
+ if ((dev->attached == RTE_EVENTDEV_ATTACHED) &&
+ (strcmp(dev->data->name, name) == 0))
+ return dev;
+ }
+
+ return NULL;
+}
+
+/**
+ * Validate if the event device index is valid attached event device.
+ *
+ * @param dev_id
+ * Event device index.
+ *
+ * @return
+ * - If the device index is valid (1) or not (0).
+ */
+static inline unsigned
+rte_event_pmd_is_valid_dev(uint8_t dev_id)
+{
+ struct rte_eventdev *dev;
+
+ if (dev_id >= rte_eventdev_globals->nb_devs)
+ return 0;
+
+ dev = &rte_eventdevs[dev_id];
+ if (dev->attached != RTE_EVENTDEV_ATTACHED)
+ return 0;
+ else
+ return 1;
+}
+
/**
* Definitions of all functions exported by a driver through the
* the generic structure of type *event_dev_ops* supplied in the
diff --git a/lib/librte_eventdev/rte_eventdev_version.map b/lib/librte_eventdev/rte_eventdev_version.map
new file mode 100644
index 0000000..3cae03d
--- /dev/null
+++ b/lib/librte_eventdev/rte_eventdev_version.map
@@ -0,0 +1,33 @@
+DPDK_17.02 {
+ global:
+
+ rte_eventdevs;
+
+ rte_event_dev_count;
+ rte_event_dev_get_dev_id;
+ rte_event_dev_socket_id;
+ rte_event_dev_info_get;
+ rte_event_dev_configure;
+ rte_event_dev_start;
+ rte_event_dev_stop;
+ rte_event_dev_close;
+ rte_event_dev_dump;
+
+ rte_event_port_default_conf_get;
+ rte_event_port_setup;
+ rte_event_port_dequeue_depth;
+ rte_event_port_enqueue_depth;
+ rte_event_port_count;
+ rte_event_port_link;
+ rte_event_port_unlink;
+ rte_event_port_links_get;
+
+ rte_event_queue_default_conf_get;
+ rte_event_queue_setup;
+ rte_event_queue_count;
+ rte_event_queue_priority;
+
+ rte_event_dequeue_timeout_ticks;
+
+ local: *;
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index f75f0e2..716725a 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -93,6 +93,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_MBUF) += -lrte_mbuf
_LDLIBS-$(CONFIG_RTE_LIBRTE_NET) += -lrte_net
_LDLIBS-$(CONFIG_RTE_LIBRTE_ETHER) += -lrte_ethdev
_LDLIBS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += -lrte_cryptodev
+_LDLIBS-$(CONFIG_RTE_LIBRTE_EVENTDEV) += -lrte_eventdev
_LDLIBS-$(CONFIG_RTE_LIBRTE_MEMPOOL) += -lrte_mempool
_LDLIBS-$(CONFIG_RTE_LIBRTE_RING) += -lrte_ring
_LDLIBS-$(CONFIG_RTE_LIBRTE_EAL) += -lrte_eal
--
2.5.5
^ permalink raw reply related
* [PATCH v4 2/6] eventdev: define southbound driver interface
From: Jerin Jacob @ 2016-12-21 9:25 UTC (permalink / raw)
To: dev
Cc: thomas.monjalon, bruce.richardson, hemant.agrawal, gage.eads,
harry.van.haaren, Jerin Jacob
In-Reply-To: <1482312326-2589-1-git-send-email-jerin.jacob@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
---
lib/librte_eventdev/rte_eventdev.h | 38 +++++
lib/librte_eventdev/rte_eventdev_pmd.h | 294 +++++++++++++++++++++++++++++++++
2 files changed, 332 insertions(+)
create mode 100644 lib/librte_eventdev/rte_eventdev_pmd.h
diff --git a/lib/librte_eventdev/rte_eventdev.h b/lib/librte_eventdev/rte_eventdev.h
index b2bc471..014e1ec 100644
--- a/lib/librte_eventdev/rte_eventdev.h
+++ b/lib/librte_eventdev/rte_eventdev.h
@@ -972,6 +972,44 @@ struct rte_event {
};
};
+struct rte_eventdev_ops;
+struct rte_eventdev;
+
+typedef void (*event_schedule_t)(struct rte_eventdev *dev);
+/**< @internal Schedule one or more events in the event dev. */
+
+typedef uint16_t (*event_enqueue_t)(void *port, const struct rte_event *ev);
+/**< @internal Enqueue event on port of a device */
+
+typedef uint16_t (*event_enqueue_burst_t)(void *port,
+ const struct rte_event ev[], uint16_t nb_events);
+/**< @internal Enqueue burst of events on port of a device */
+
+typedef uint16_t (*event_dequeue_t)(void *port, struct rte_event *ev,
+ uint64_t timeout_ticks);
+/**< @internal Dequeue event from port of a device */
+
+typedef uint16_t (*event_dequeue_burst_t)(void *port, struct rte_event ev[],
+ uint16_t nb_events, uint64_t timeout_ticks);
+/**< @internal Dequeue burst of events from port of a device */
+
+
+/** @internal The data structure associated with each event device. */
+struct rte_eventdev {
+ event_schedule_t schedule;
+ /**< Pointer to PMD schedule function. */
+ event_enqueue_t enqueue;
+ /**< Pointer to PMD enqueue function. */
+ event_enqueue_burst_t enqueue_burst;
+ /**< Pointer to PMD enqueue burst function. */
+ event_dequeue_t dequeue;
+ /**< Pointer to PMD dequeue function. */
+ event_dequeue_burst_t dequeue_burst;
+ /**< Pointer to PMD dequeue burst function. */
+
+} __rte_cache_aligned;
+
+
/**
* Schedule one or more events in the event dev.
*
diff --git a/lib/librte_eventdev/rte_eventdev_pmd.h b/lib/librte_eventdev/rte_eventdev_pmd.h
new file mode 100644
index 0000000..40552aa
--- /dev/null
+++ b/lib/librte_eventdev/rte_eventdev_pmd.h
@@ -0,0 +1,294 @@
+/*
+ *
+ * Copyright(c) 2016 Cavium networks. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Cavium networks nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_EVENTDEV_PMD_H_
+#define _RTE_EVENTDEV_PMD_H_
+
+/** @file
+ * RTE Event PMD APIs
+ *
+ * @note
+ * These API are from event PMD only and user applications should not call
+ * them directly.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "rte_eventdev.h"
+
+/**
+ * Definitions of all functions exported by a driver through the
+ * the generic structure of type *event_dev_ops* supplied in the
+ * *rte_eventdev* structure associated with a device.
+ */
+
+/**
+ * Get device information of a device.
+ *
+ * @param dev
+ * Event device pointer
+ * @param dev_info
+ * Event device information structure
+ *
+ * @return
+ * Returns 0 on success
+ */
+typedef void (*eventdev_info_get_t)(struct rte_eventdev *dev,
+ struct rte_event_dev_info *dev_info);
+
+/**
+ * Configure a device.
+ *
+ * @param dev
+ * Event device pointer
+ *
+ * @return
+ * Returns 0 on success
+ */
+typedef int (*eventdev_configure_t)(const struct rte_eventdev *dev);
+
+/**
+ * Start a configured device.
+ *
+ * @param dev
+ * Event device pointer
+ *
+ * @return
+ * Returns 0 on success
+ */
+typedef int (*eventdev_start_t)(struct rte_eventdev *dev);
+
+/**
+ * Stop a configured device.
+ *
+ * @param dev
+ * Event device pointer
+ */
+typedef void (*eventdev_stop_t)(struct rte_eventdev *dev);
+
+/**
+ * Close a configured device.
+ *
+ * @param dev
+ * Event device pointer
+ *
+ * @return
+ * - 0 on success
+ * - (-EAGAIN) if can't close as device is busy
+ */
+typedef int (*eventdev_close_t)(struct rte_eventdev *dev);
+
+/**
+ * Retrieve the default event queue configuration.
+ *
+ * @param dev
+ * Event device pointer
+ * @param queue_id
+ * Event queue index
+ * @param[out] queue_conf
+ * Event queue configuration structure
+ *
+ */
+typedef void (*eventdev_queue_default_conf_get_t)(struct rte_eventdev *dev,
+ uint8_t queue_id, struct rte_event_queue_conf *queue_conf);
+
+/**
+ * Setup an event queue.
+ *
+ * @param dev
+ * Event device pointer
+ * @param queue_id
+ * Event queue index
+ * @param queue_conf
+ * Event queue configuration structure
+ *
+ * @return
+ * Returns 0 on success.
+ */
+typedef int (*eventdev_queue_setup_t)(struct rte_eventdev *dev,
+ uint8_t queue_id,
+ const struct rte_event_queue_conf *queue_conf);
+
+/**
+ * Release resources allocated by given event queue.
+ *
+ * @param dev
+ * Event device pointer
+ * @param queue_id
+ * Event queue index
+ *
+ */
+typedef void (*eventdev_queue_release_t)(struct rte_eventdev *dev,
+ uint8_t queue_id);
+
+/**
+ * Retrieve the default event port configuration.
+ *
+ * @param dev
+ * Event device pointer
+ * @param port_id
+ * Event port index
+ * @param[out] port_conf
+ * Event port configuration structure
+ *
+ */
+typedef void (*eventdev_port_default_conf_get_t)(struct rte_eventdev *dev,
+ uint8_t port_id, struct rte_event_port_conf *port_conf);
+
+/**
+ * Setup an event port.
+ *
+ * @param dev
+ * Event device pointer
+ * @param port_id
+ * Event port index
+ * @param port_conf
+ * Event port configuration structure
+ *
+ * @return
+ * Returns 0 on success.
+ */
+typedef int (*eventdev_port_setup_t)(struct rte_eventdev *dev,
+ uint8_t port_id,
+ const struct rte_event_port_conf *port_conf);
+
+/**
+ * Release memory resources allocated by given event port.
+ *
+ * @param port
+ * Event port pointer
+ *
+ */
+typedef void (*eventdev_port_release_t)(void *port);
+
+/**
+ * Link multiple source event queues to destination event port.
+ *
+ * @param port
+ * Event port pointer
+ * @param link
+ * Points to an array of *nb_links* event queues to be linked
+ * to the event port.
+ * @param priorities
+ * Points to an array of *nb_links* service priorities associated with each
+ * event queue link to event port.
+ * @param nb_links
+ * The number of links to establish
+ *
+ * @return
+ * Returns 0 on success.
+ *
+ */
+typedef int (*eventdev_port_link_t)(void *port,
+ const uint8_t queues[], const uint8_t priorities[],
+ uint16_t nb_links);
+
+/**
+ * Unlink multiple source event queues from destination event port.
+ *
+ * @param port
+ * Event port pointer
+ * @param queues
+ * An array of *nb_unlinks* event queues to be unlinked from the event port.
+ * @param nb_unlinks
+ * The number of unlinks to establish
+ *
+ * @return
+ * Returns 0 on success.
+ *
+ */
+typedef int (*eventdev_port_unlink_t)(void *port,
+ uint8_t queues[], uint16_t nb_unlinks);
+
+/**
+ * Converts nanoseconds to *timeout_ticks* value for rte_event_dequeue()
+ *
+ * @param dev
+ * Event device pointer
+ * @param ns
+ * Wait time in nanosecond
+ * @param[out] timeout_ticks
+ * Value for the *timeout_ticks* parameter in rte_event_dequeue() function
+ *
+ */
+typedef void (*eventdev_dequeue_timeout_ticks_t)(struct rte_eventdev *dev,
+ uint64_t ns, uint64_t *timeout_ticks);
+
+/**
+ * Dump internal information
+ *
+ * @param dev
+ * Event device pointer
+ * @param f
+ * A pointer to a file for output
+ *
+ */
+typedef void (*eventdev_dump_t)(struct rte_eventdev *dev, FILE *f);
+
+/** Event device operations function pointer table */
+struct rte_eventdev_ops {
+ eventdev_info_get_t dev_infos_get; /**< Get device info. */
+ eventdev_configure_t dev_configure; /**< Configure device. */
+ eventdev_start_t dev_start; /**< Start device. */
+ eventdev_stop_t dev_stop; /**< Stop device. */
+ eventdev_close_t dev_close; /**< Close device. */
+
+ eventdev_queue_default_conf_get_t queue_def_conf;
+ /**< Get default queue configuration. */
+ eventdev_queue_setup_t queue_setup;
+ /**< Set up an event queue. */
+ eventdev_queue_release_t queue_release;
+ /**< Release an event queue. */
+
+ eventdev_port_default_conf_get_t port_def_conf;
+ /**< Get default port configuration. */
+ eventdev_port_setup_t port_setup;
+ /**< Set up an event port. */
+ eventdev_port_release_t port_release;
+ /**< Release an event port. */
+
+ eventdev_port_link_t port_link;
+ /**< Link event queues to an event port. */
+ eventdev_port_unlink_t port_unlink;
+ /**< Unlink event queues from an event port. */
+ eventdev_dequeue_timeout_ticks_t timeout_ticks;
+ /**< Converts ns to *timeout_ticks* value for rte_event_dequeue() */
+ eventdev_dump_t dump;
+ /* Dump internal information */
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_EVENTDEV_PMD_H_ */
--
2.5.5
^ permalink raw reply related
* [PATCH v4 1/6] eventdev: introduce event driven programming model
From: Jerin Jacob @ 2016-12-21 9:25 UTC (permalink / raw)
To: dev
Cc: thomas.monjalon, bruce.richardson, hemant.agrawal, gage.eads,
harry.van.haaren, Jerin Jacob
In-Reply-To: <1482312326-2589-1-git-send-email-jerin.jacob@caviumnetworks.com>
In a polling model, lcores poll ethdev ports and associated
rx queues directly to look for packet. In an event driven model,
by contrast, lcores call the scheduler that selects packets for
them based on programmer-specified criteria. Eventdev library
adds support for event driven programming model, which offer
applications automatic multicore scaling, dynamic load balancing,
pipelining, packet ingress order maintenance and
synchronization services to simplify application packet processing.
By introducing event driven programming model, DPDK can support
both polling and event driven programming models for packet processing,
and applications are free to choose whatever model
(or combination of the two) that best suits their needs.
This patch adds the eventdev specification header file.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
---
MAINTAINERS | 3 +
doc/api/doxy-api-index.md | 1 +
doc/api/doxy-api.conf | 1 +
lib/librte_eventdev/rte_eventdev.h | 1275 ++++++++++++++++++++++++++++++++++++
4 files changed, 1280 insertions(+)
create mode 100644 lib/librte_eventdev/rte_eventdev.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 26d9590..8e59352 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -249,6 +249,9 @@ F: lib/librte_cryptodev/
F: app/test/test_cryptodev*
F: examples/l2fwd-crypto/
+Eventdev API - EXPERIMENTAL
+M: Jerin Jacob <jerin.jacob@caviumnetworks.com>
+F: lib/librte_eventdev/
Networking Drivers
------------------
diff --git a/doc/api/doxy-api-index.md b/doc/api/doxy-api-index.md
index 33c04ed..0ad3367 100644
--- a/doc/api/doxy-api-index.md
+++ b/doc/api/doxy-api-index.md
@@ -40,6 +40,7 @@ There are many libraries, so their headers may be grouped by topics:
[ethdev] (@ref rte_ethdev.h),
[ethctrl] (@ref rte_eth_ctrl.h),
[cryptodev] (@ref rte_cryptodev.h),
+ [eventdev] (@ref rte_eventdev.h),
[devargs] (@ref rte_devargs.h),
[bond] (@ref rte_eth_bond.h),
[vhost] (@ref rte_virtio_net.h),
diff --git a/doc/api/doxy-api.conf b/doc/api/doxy-api.conf
index b340fcf..e030c21 100644
--- a/doc/api/doxy-api.conf
+++ b/doc/api/doxy-api.conf
@@ -41,6 +41,7 @@ INPUT = doc/api/doxy-api-index.md \
lib/librte_cryptodev \
lib/librte_distributor \
lib/librte_ether \
+ lib/librte_eventdev \
lib/librte_hash \
lib/librte_ip_frag \
lib/librte_jobstats \
diff --git a/lib/librte_eventdev/rte_eventdev.h b/lib/librte_eventdev/rte_eventdev.h
new file mode 100644
index 0000000..b2bc471
--- /dev/null
+++ b/lib/librte_eventdev/rte_eventdev.h
@@ -0,0 +1,1275 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright 2016 Cavium.
+ * Copyright 2016 Intel Corporation.
+ * Copyright 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Cavium nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_EVENTDEV_H_
+#define _RTE_EVENTDEV_H_
+
+/**
+ * @file
+ *
+ * RTE Event Device API
+ *
+ * In a polling model, lcores poll ethdev ports and associated rx queues
+ * directly to look for packet. In an event driven model, by contrast, lcores
+ * call the scheduler that selects packets for them based on programmer
+ * specified criteria. Eventdev library adds support for event driven
+ * programming model, which offer applications automatic multicore scaling,
+ * dynamic load balancing, pipelining, packet ingress order maintenance and
+ * synchronization services to simplify application packet processing.
+ *
+ * The Event Device API is composed of two parts:
+ *
+ * - The application-oriented Event API that includes functions to setup
+ * an event device (configure it, setup its queues, ports and start it), to
+ * establish the link between queues to port and to receive events, and so on.
+ *
+ * - The driver-oriented Event API that exports a function allowing
+ * an event poll Mode Driver (PMD) to simultaneously register itself as
+ * an event device driver.
+ *
+ * Event device components:
+ *
+ * +-----------------+
+ * | +-------------+ |
+ * +-------+ | | flow 0 | |
+ * |Packet | | +-------------+ |
+ * |event | | +-------------+ |
+ * | | | | flow 1 | |port_link(port0, queue0)
+ * +-------+ | +-------------+ | | +--------+
+ * +-------+ | +-------------+ o-----v-----o |dequeue +------+
+ * |Crypto | | | flow n | | | event +------->|Core 0|
+ * |work | | +-------------+ o----+ | port 0 | | |
+ * |done ev| | event queue 0 | | +--------+ +------+
+ * +-------+ +-----------------+ |
+ * +-------+ |
+ * |Timer | +-----------------+ | +--------+
+ * |expiry | | +-------------+ | +------o |dequeue +------+
+ * |event | | | flow 0 | o-----------o event +------->|Core 1|
+ * +-------+ | +-------------+ | +----o port 1 | | |
+ * Event enqueue | +-------------+ | | +--------+ +------+
+ * o-------------> | | flow 1 | | |
+ * enqueue( | +-------------+ | |
+ * queue_id, | | | +--------+ +------+
+ * flow_id, | +-------------+ | | | |dequeue |Core 2|
+ * sched_type, | | flow n | o-----------o event +------->| |
+ * event_type, | +-------------+ | | | port 2 | +------+
+ * subev_type, | event queue 1 | | +--------+
+ * event) +-----------------+ | +--------+
+ * | | |dequeue +------+
+ * +-------+ +-----------------+ | | event +------->|Core n|
+ * |Core | | +-------------+ o-----------o port n | | |
+ * |(SW) | | | flow 0 | | | +--------+ +--+---+
+ * |event | | +-------------+ | | |
+ * +-------+ | +-------------+ | | |
+ * ^ | | flow 1 | | | |
+ * | | +-------------+ o------+ |
+ * | | +-------------+ | |
+ * | | | flow n | | |
+ * | | +-------------+ | |
+ * | | event queue n | |
+ * | +-----------------+ |
+ * | |
+ * +-----------------------------------------------------------+
+ *
+ * Event device: A hardware or software-based event scheduler.
+ *
+ * Event: A unit of scheduling that encapsulates a packet or other datatype
+ * like SW generated event from the CPU, Crypto work completion notification,
+ * Timer expiry event notification etc as well as metadata.
+ * The metadata includes flow ID, scheduling type, event priority, event_type,
+ * sub_event_type etc.
+ *
+ * Event queue: A queue containing events that are scheduled by the event dev.
+ * An event queue contains events of different flows associated with scheduling
+ * types, such as atomic, ordered, or parallel.
+ *
+ * Event port: An application's interface into the event dev for enqueue and
+ * dequeue operations. Each event port can be linked with one or more
+ * event queues for dequeue operations.
+ *
+ * By default, all the functions of the Event Device API exported by a PMD
+ * are lock-free functions which assume to not be invoked in parallel on
+ * different logical cores to work on the same target object. For instance,
+ * the dequeue function of a PMD cannot be invoked in parallel on two logical
+ * cores to operates on same event port. Of course, this function
+ * can be invoked in parallel by different logical cores on different ports.
+ * It is the responsibility of the upper level application to enforce this rule.
+ *
+ * In all functions of the Event API, the Event device is
+ * designated by an integer >= 0 named the device identifier *dev_id*
+ *
+ * At the Event driver level, Event devices are represented by a generic
+ * data structure of type *rte_event_dev*.
+ *
+ * Event devices are dynamically registered during the PCI/SoC device probing
+ * phase performed at EAL initialization time.
+ * When an Event device is being probed, a *rte_event_dev* structure and
+ * a new device identifier are allocated for that device. Then, the
+ * event_dev_init() function supplied by the Event driver matching the probed
+ * device is invoked to properly initialize the device.
+ *
+ * The role of the device init function consists of resetting the hardware or
+ * software event driver implementations.
+ *
+ * If the device init operation is successful, the correspondence between
+ * the device identifier assigned to the new device and its associated
+ * *rte_event_dev* structure is effectively registered.
+ * Otherwise, both the *rte_event_dev* structure and the device identifier are
+ * freed.
+ *
+ * The functions exported by the application Event API to setup a device
+ * designated by its device identifier must be invoked in the following order:
+ * - rte_event_dev_configure()
+ * - rte_event_queue_setup()
+ * - rte_event_port_setup()
+ * - rte_event_port_link()
+ * - rte_event_dev_start()
+ *
+ * Then, the application can invoke, in any order, the functions
+ * exported by the Event API to schedule events, dequeue events, enqueue events,
+ * change event queue(s) to event port [un]link establishment and so on.
+ *
+ * Application may use rte_event_[queue/port]_default_conf_get() to get the
+ * default configuration to set up an event queue or event port by
+ * overriding few default values.
+ *
+ * If the application wants to change the configuration (i.e. call
+ * rte_event_dev_configure(), rte_event_queue_setup(), or
+ * rte_event_port_setup()), it must call rte_event_dev_stop() first to stop the
+ * device and then do the reconfiguration before calling rte_event_dev_start()
+ * again. The schedule, enqueue and dequeue functions should not be invoked
+ * when the device is stopped.
+ *
+ * Finally, an application can close an Event device by invoking the
+ * rte_event_dev_close() function.
+ *
+ * Each function of the application Event API invokes a specific function
+ * of the PMD that controls the target device designated by its device
+ * identifier.
+ *
+ * For this purpose, all device-specific functions of an Event driver are
+ * supplied through a set of pointers contained in a generic structure of type
+ * *event_dev_ops*.
+ * The address of the *event_dev_ops* structure is stored in the *rte_event_dev*
+ * structure by the device init function of the Event driver, which is
+ * invoked during the PCI/SoC device probing phase, as explained earlier.
+ *
+ * In other words, each function of the Event API simply retrieves the
+ * *rte_event_dev* structure associated with the device identifier and
+ * performs an indirect invocation of the corresponding driver function
+ * supplied in the *event_dev_ops* structure of the *rte_event_dev* structure.
+ *
+ * For performance reasons, the address of the fast-path functions of the
+ * Event driver is not contained in the *event_dev_ops* structure.
+ * Instead, they are directly stored at the beginning of the *rte_event_dev*
+ * structure to avoid an extra indirect memory access during their invocation.
+ *
+ * RTE event device drivers do not use interrupts for enqueue or dequeue
+ * operation. Instead, Event drivers export Poll-Mode enqueue and dequeue
+ * functions to applications.
+ *
+ * An event driven based application has following typical workflow on fastpath:
+ * \code{.c}
+ * while (1) {
+ *
+ * rte_event_schedule(dev_id);
+ *
+ * rte_event_dequeue(...);
+ *
+ * (event processing)
+ *
+ * rte_event_enqueue(...);
+ * }
+ * \endcode
+ *
+ * The events are injected to event device through *enqueue* operation by
+ * event producers in the system. The typical event producers are ethdev
+ * subsystem for generating packet events, CPU(SW) for generating events based
+ * on different stages of application processing, cryptodev for generating
+ * crypto work completion notification etc
+ *
+ * The *dequeue* operation gets one or more events from the event ports.
+ * The application process the events and send to downstream event queue through
+ * rte_event_enqueue_burst() if it is an intermediate stage of event processing,
+ * on the final stage, the application may send to different subsystem like
+ * ethdev to send the packet/event on the wire using ethdev
+ * rte_eth_tx_burst() API.
+ *
+ * The point at which events are scheduled to ports depends on the device.
+ * For hardware devices, scheduling occurs asynchronously without any software
+ * intervention. Software schedulers can either be distributed
+ * (each worker thread schedules events to its own port) or centralized
+ * (a dedicated thread schedules to all ports). Distributed software schedulers
+ * perform the scheduling in rte_event_dequeue_burst(), whereas centralized
+ * scheduler logic is located in rte_event_schedule().
+ * The RTE_EVENT_DEV_CAP_DISTRIBUTED_SCHED capability flag is not set
+ * indicates the device is centralized and thus needs a dedicated scheduling
+ * thread that repeatedly calls rte_event_schedule().
+ *
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <rte_common.h>
+#include <rte_pci.h>
+#include <rte_mbuf.h>
+
+/* Event device capability bitmap flags */
+#define RTE_EVENT_DEV_CAP_QUEUE_QOS (1ULL << 0)
+/**< Event scheduling prioritization is based on the priority associated with
+ * each event queue.
+ *
+ * @see rte_event_queue_setup()
+ */
+#define RTE_EVENT_DEV_CAP_EVENT_QOS (1ULL << 1)
+/**< Event scheduling prioritization is based on the priority associated with
+ * each event. Priority of each event is supplied in *rte_event* structure
+ * on each enqueue operation.
+ *
+ * @see rte_event_enqueue_burst()
+ */
+#define RTE_EVENT_DEV_CAP_DISTRIBUTED_SCHED (1ULL << 2)
+/**< Event device operates in distributed scheduling mode.
+ * In distributed scheduling mode, event scheduling happens in HW or
+ * rte_event_dequeue_burst() or the combination of these two.
+ * If the flag is not set then eventdev is centralized and thus needs a
+ * dedicated scheduling thread that repeatedly calls rte_event_schedule().
+ *
+ * @see rte_event_schedule(), rte_event_dequeue_burst()
+ */
+
+/* Event device priority levels */
+#define RTE_EVENT_DEV_PRIORITY_HIGHEST 0
+/**< Highest priority expressed across eventdev subsystem
+ * @see rte_event_queue_setup(), rte_event_enqueue_burst()
+ * @see rte_event_port_link()
+ */
+#define RTE_EVENT_DEV_PRIORITY_NORMAL 128
+/**< Normal priority expressed across eventdev subsystem
+ * @see rte_event_queue_setup(), rte_event_enqueue_burst()
+ * @see rte_event_port_link()
+ */
+#define RTE_EVENT_DEV_PRIORITY_LOWEST 255
+/**< Lowest priority expressed across eventdev subsystem
+ * @see rte_event_queue_setup(), rte_event_enqueue_burst()
+ * @see rte_event_port_link()
+ */
+
+/**
+ * Get the total number of event devices that have been successfully
+ * initialised.
+ *
+ * @return
+ * The total number of usable event devices.
+ */
+uint8_t
+rte_event_dev_count(void);
+
+/**
+ * Get the device identifier for the named event device.
+ *
+ * @param name
+ * Event device name to select the event device identifier.
+ *
+ * @return
+ * Returns event device identifier on success.
+ * - <0: Failure to find named event device.
+ */
+int
+rte_event_dev_get_dev_id(const char *name);
+
+/**
+ * Return the NUMA socket to which a device is connected.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @return
+ * The NUMA socket id to which the device is connected or
+ * a default of zero if the socket could not be determined.
+ * -(-EINVAL) dev_id value is out of range.
+ */
+int
+rte_event_dev_socket_id(uint8_t dev_id);
+
+/**
+ * Event device information
+ */
+struct rte_event_dev_info {
+ const char *driver_name; /**< Event driver name */
+ struct rte_pci_device *pci_dev; /**< PCI information */
+ uint32_t min_dequeue_timeout_ns;
+ /**< Minimum supported global dequeue timeout(ns) by this device */
+ uint32_t max_dequeue_timeout_ns;
+ /**< Maximum supported global dequeue timeout(ns) by this device */
+ uint32_t dequeue_timeout_ns;
+ /**< Configured global dequeue timeout(ns) for this device */
+ uint8_t max_event_queues;
+ /**< Maximum event_queues supported by this device */
+ uint32_t max_event_queue_flows;
+ /**< Maximum supported flows in an event queue by this device*/
+ uint8_t max_event_queue_priority_levels;
+ /**< Maximum number of event queue priority levels by this device.
+ * Valid when the device has RTE_EVENT_DEV_CAP_QUEUE_QOS capability
+ */
+ uint8_t max_event_priority_levels;
+ /**< Maximum number of event priority levels by this device.
+ * Valid when the device has RTE_EVENT_DEV_CAP_EVENT_QOS capability
+ */
+ uint8_t max_event_ports;
+ /**< Maximum number of event ports supported by this device */
+ uint8_t max_event_port_dequeue_depth;
+ /**< Maximum number of events can be dequeued at a time from an
+ * event port by this device.
+ * A device that does not support bulk dequeue will set this as 1.
+ */
+ uint32_t max_event_port_enqueue_depth;
+ /**< Maximum number of events can be enqueued at a time from an
+ * event port by this device.
+ * A device that does not support bulk enqueue will set this as 1.
+ */
+ int32_t max_num_events;
+ /**< A *closed system* event dev has a limit on the number of events it
+ * can manage at a time. An *open system* event dev does not have a
+ * limit and will specify this as -1.
+ */
+ uint32_t event_dev_cap;
+ /**< Event device capabilities(RTE_EVENT_DEV_CAP_)*/
+};
+
+/**
+ * Retrieve the contextual information of an event device.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ *
+ * @param[out] dev_info
+ * A pointer to a structure of type *rte_event_dev_info* to be filled with the
+ * contextual information of the device.
+ *
+ * @return
+ * - 0: Success, driver updates the contextual information of the event device
+ * - <0: Error code returned by the driver info get function.
+ *
+ */
+int
+rte_event_dev_info_get(uint8_t dev_id, struct rte_event_dev_info *dev_info);
+
+/* Event device configuration bitmap flags */
+#define RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT (1ULL << 0)
+/**< Override the global *dequeue_timeout_ns* and use per dequeue timeout in ns.
+ * @see rte_event_dequeue_timeout_ticks(), rte_event_dequeue_burst()
+ */
+
+/** Event device configuration structure */
+struct rte_event_dev_config {
+ uint32_t dequeue_timeout_ns;
+ /**< rte_event_dequeue_burst() timeout on this device.
+ * This value should be in the range of *min_dequeue_timeout_ns* and
+ * *max_dequeue_timeout_ns* which previously provided in
+ * rte_event_dev_info_get()
+ * @see RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT
+ */
+ int32_t nb_events_limit;
+ /**< Applies to *closed system* event dev only. This field indicates a
+ * limit to ethdev-like devices to limit the number of events injected
+ * into the system to not overwhelm core-to-core events.
+ * This value cannot exceed the *max_num_events* which previously
+ * provided in rte_event_dev_info_get()
+ */
+ uint8_t nb_event_queues;
+ /**< Number of event queues to configure on this device.
+ * This value cannot exceed the *max_event_queues* which previously
+ * provided in rte_event_dev_info_get()
+ */
+ uint8_t nb_event_ports;
+ /**< Number of event ports to configure on this device.
+ * This value cannot exceed the *max_event_ports* which previously
+ * provided in rte_event_dev_info_get()
+ */
+ uint32_t nb_event_queue_flows;
+ /**< Number of flows for any event queue on this device.
+ * This value cannot exceed the *max_event_queue_flows* which previously
+ * provided in rte_event_dev_info_get()
+ */
+ uint8_t nb_event_port_dequeue_depth;
+ /**< Maximum number of events can be dequeued at a time from an
+ * event port by this device.
+ * This value cannot exceed the *max_event_port_dequeue_depth*
+ * which previously provided in rte_event_dev_info_get()
+ * @see rte_event_port_setup()
+ */
+ uint32_t nb_event_port_enqueue_depth;
+ /**< Maximum number of events can be enqueued at a time from an
+ * event port by this device.
+ * This value cannot exceed the *max_event_port_enqueue_depth*
+ * which previously provided in rte_event_dev_info_get()
+ * @see rte_event_port_setup()
+ */
+ uint32_t event_dev_cfg;
+ /**< Event device config flags(RTE_EVENT_DEV_CFG_)*/
+};
+
+/**
+ * Configure an event device.
+ *
+ * This function must be invoked first before any other function in the
+ * API. This function can also be re-invoked when a device is in the
+ * stopped state.
+ *
+ * The caller may use rte_event_dev_info_get() to get the capability of each
+ * resources available for this event device.
+ *
+ * @param dev_id
+ * The identifier of the device to configure.
+ * @param dev_conf
+ * The event device configuration structure.
+ *
+ * @return
+ * - 0: Success, device configured.
+ * - <0: Error code returned by the driver configuration function.
+ */
+int
+rte_event_dev_configure(uint8_t dev_id,
+ const struct rte_event_dev_config *dev_conf);
+
+
+/* Event queue specific APIs */
+
+/* Event queue configuration bitmap flags */
+#define RTE_EVENT_QUEUE_CFG_DEFAULT (0)
+/**< Default value of *event_queue_cfg* when rte_event_queue_setup() invoked
+ * with queue_conf == NULL
+ *
+ * @see rte_event_queue_setup()
+ */
+#define RTE_EVENT_QUEUE_CFG_TYPE_MASK (3ULL << 0)
+/**< Mask for event queue schedule type configuration request */
+#define RTE_EVENT_QUEUE_CFG_ALL_TYPES (0ULL << 0)
+/**< Allow ATOMIC,ORDERED,PARALLEL schedule type enqueue
+ *
+ * @see RTE_SCHED_TYPE_ORDERED, RTE_SCHED_TYPE_ATOMIC, RTE_SCHED_TYPE_PARALLEL
+ * @see rte_event_enqueue_burst()
+ */
+#define RTE_EVENT_QUEUE_CFG_ATOMIC_ONLY (1ULL << 0)
+/**< Allow only ATOMIC schedule type enqueue
+ *
+ * The rte_event_enqueue_burst() result is undefined if the queue configured
+ * with ATOMIC only and sched_type != RTE_SCHED_TYPE_ATOMIC
+ *
+ * @see RTE_SCHED_TYPE_ATOMIC, rte_event_enqueue_burst()
+ */
+#define RTE_EVENT_QUEUE_CFG_ORDERED_ONLY (2ULL << 0)
+/**< Allow only ORDERED schedule type enqueue
+ *
+ * The rte_event_enqueue_burst() result is undefined if the queue configured
+ * with ORDERED only and sched_type != RTE_SCHED_TYPE_ORDERED
+ *
+ * @see RTE_SCHED_TYPE_ORDERED, rte_event_enqueue_burst()
+ */
+#define RTE_EVENT_QUEUE_CFG_PARALLEL_ONLY (3ULL << 0)
+/**< Allow only PARALLEL schedule type enqueue
+ *
+ * The rte_event_enqueue_burst() result is undefined if the queue configured
+ * with PARALLEL only and sched_type != RTE_SCHED_TYPE_PARALLEL
+ *
+ * @see RTE_SCHED_TYPE_PARALLEL, rte_event_enqueue_burst()
+ */
+#define RTE_EVENT_QUEUE_CFG_SINGLE_LINK (1ULL << 2)
+/**< This event queue links only to a single event port.
+ *
+ * @see rte_event_port_setup(), rte_event_port_link()
+ */
+
+/** Event queue configuration structure */
+struct rte_event_queue_conf {
+ uint32_t nb_atomic_flows;
+ /**< The maximum number of active flows this queue can track at any
+ * given time. The value must be in the range of
+ * [1 - nb_event_queue_flows)] which previously provided in
+ * rte_event_dev_info_get().
+ */
+ uint32_t nb_atomic_order_sequences;
+ /**< The maximum number of outstanding events waiting to be
+ * reordered by this queue. In other words, the number of entries in
+ * this queue’s reorder buffer.When the number of events in the
+ * reorder buffer reaches to *nb_atomic_order_sequences* then the
+ * scheduler cannot schedule the events from this queue and invalid
+ * event will be returned from dequeue until one or more entries are
+ * freed up/released.
+ * The value must be in the range of [1 - nb_event_queue_flows)]
+ * which previously supplied to rte_event_dev_configure().
+ */
+ uint32_t event_queue_cfg; /**< Queue cfg flags(EVENT_QUEUE_CFG_) */
+ uint8_t priority;
+ /**< Priority for this event queue relative to other event queues.
+ * The requested priority should in the range of
+ * [RTE_EVENT_DEV_PRIORITY_HIGHEST, RTE_EVENT_DEV_PRIORITY_LOWEST].
+ * The implementation shall normalize the requested priority to
+ * event device supported priority value.
+ * Valid when the device has RTE_EVENT_DEV_CAP_QUEUE_QOS capability
+ */
+};
+
+/**
+ * Retrieve the default configuration information of an event queue designated
+ * by its *queue_id* from the event driver for an event device.
+ *
+ * This function intended to be used in conjunction with rte_event_queue_setup()
+ * where caller needs to set up the queue by overriding few default values.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @param queue_id
+ * The index of the event queue to get the configuration information.
+ * The value must be in the range [0, nb_event_queues - 1]
+ * previously supplied to rte_event_dev_configure().
+ * @param[out] queue_conf
+ * The pointer to the default event queue configuration data.
+ * @return
+ * - 0: Success, driver updates the default event queue configuration data.
+ * - <0: Error code returned by the driver info get function.
+ *
+ * @see rte_event_queue_setup()
+ *
+ */
+int
+rte_event_queue_default_conf_get(uint8_t dev_id, uint8_t queue_id,
+ struct rte_event_queue_conf *queue_conf);
+
+/**
+ * Allocate and set up an event queue for an event device.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @param queue_id
+ * The index of the event queue to setup. The value must be in the range
+ * [0, nb_event_queues - 1] previously supplied to rte_event_dev_configure().
+ * @param queue_conf
+ * The pointer to the configuration data to be used for the event queue.
+ * NULL value is allowed, in which case default configuration used.
+ *
+ * @see rte_event_queue_default_conf_get()
+ *
+ * @return
+ * - 0: Success, event queue correctly set up.
+ * - <0: event queue configuration failed
+ */
+int
+rte_event_queue_setup(uint8_t dev_id, uint8_t queue_id,
+ const struct rte_event_queue_conf *queue_conf);
+
+/**
+ * Get the number of event queues on a specific event device
+ *
+ * @param dev_id
+ * Event device identifier.
+ * @return
+ * - The number of configured event queues
+ */
+uint8_t
+rte_event_queue_count(uint8_t dev_id);
+
+/**
+ * Get the priority of the event queue on a specific event device
+ *
+ * @param dev_id
+ * Event device identifier.
+ * @param queue_id
+ * Event queue identifier.
+ * @return
+ * - If the device has RTE_EVENT_DEV_CAP_QUEUE_QOS capability then the
+ * configured priority of the event queue in
+ * [RTE_EVENT_DEV_PRIORITY_HIGHEST, RTE_EVENT_DEV_PRIORITY_LOWEST] range
+ * else the value RTE_EVENT_DEV_PRIORITY_NORMAL
+ */
+uint8_t
+rte_event_queue_priority(uint8_t dev_id, uint8_t queue_id);
+
+/* Event port specific APIs */
+
+/** Event port configuration structure */
+struct rte_event_port_conf {
+ int32_t new_event_threshold;
+ /**< A backpressure threshold for new event enqueues on this port.
+ * Use for *closed system* event dev where event capacity is limited,
+ * and cannot exceed the capacity of the event dev.
+ * Configuring ports with different thresholds can make higher priority
+ * traffic less likely to be backpressured.
+ * For example, a port used to inject NIC Rx packets into the event dev
+ * can have a lower threshold so as not to overwhelm the device,
+ * while ports used for worker pools can have a higher threshold.
+ * This value cannot exceed the *nb_events_limit*
+ * which previously supplied to rte_event_dev_configure()
+ */
+ uint8_t dequeue_depth;
+ /**< Configure number of bulk dequeues for this event port.
+ * This value cannot exceed the *nb_event_port_dequeue_depth*
+ * which previously supplied to rte_event_dev_configure()
+ */
+ uint8_t enqueue_depth;
+ /**< Configure number of bulk enqueues for this event port.
+ * This value cannot exceed the *nb_event_port_enqueue_depth*
+ * which previously supplied to rte_event_dev_configure()
+ */
+};
+
+/**
+ * Retrieve the default configuration information of an event port designated
+ * by its *port_id* from the event driver for an event device.
+ *
+ * This function intended to be used in conjunction with rte_event_port_setup()
+ * where caller needs to set up the port by overriding few default values.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @param port_id
+ * The index of the event port to get the configuration information.
+ * The value must be in the range [0, nb_event_ports - 1]
+ * previously supplied to rte_event_dev_configure().
+ * @param[out] port_conf
+ * The pointer to the default event port configuration data
+ * @return
+ * - 0: Success, driver updates the default event port configuration data.
+ * - <0: Error code returned by the driver info get function.
+ *
+ * @see rte_event_port_setup()
+ *
+ */
+int
+rte_event_port_default_conf_get(uint8_t dev_id, uint8_t port_id,
+ struct rte_event_port_conf *port_conf);
+
+/**
+ * Allocate and set up an event port for an event device.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @param port_id
+ * The index of the event port to setup. The value must be in the range
+ * [0, nb_event_ports - 1] previously supplied to rte_event_dev_configure().
+ * @param port_conf
+ * The pointer to the configuration data to be used for the queue.
+ * NULL value is allowed, in which case default configuration used.
+ *
+ * @see rte_event_port_default_conf_get()
+ *
+ * @return
+ * - 0: Success, event port correctly set up.
+ * - <0: Port configuration failed
+ * - (-EDQUOT) Quota exceeded(Application tried to link the queue configured
+ * with RTE_EVENT_QUEUE_CFG_SINGLE_LINK to more than one event ports)
+ */
+int
+rte_event_port_setup(uint8_t dev_id, uint8_t port_id,
+ const struct rte_event_port_conf *port_conf);
+
+/**
+ * Get the number of dequeue queue depth configured for event port designated
+ * by its *port_id* on a specific event device
+ *
+ * @param dev_id
+ * Event device identifier.
+ * @param port_id
+ * Event port identifier.
+ * @return
+ * - The number of configured dequeue queue depth
+ *
+ * @see rte_event_dequeue_burst()
+ */
+uint8_t
+rte_event_port_dequeue_depth(uint8_t dev_id, uint8_t port_id);
+
+/**
+ * Get the number of enqueue queue depth configured for event port designated
+ * by its *port_id* on a specific event device
+ *
+ * @param dev_id
+ * Event device identifier.
+ * @param port_id
+ * Event port identifier.
+ * @return
+ * - The number of configured enqueue queue depth
+ *
+ * @see rte_event_enqueue_burst()
+ */
+uint8_t
+rte_event_port_enqueue_depth(uint8_t dev_id, uint8_t port_id);
+
+/**
+ * Get the number of ports on a specific event device
+ *
+ * @param dev_id
+ * Event device identifier.
+ * @return
+ * - The number of configured ports
+ */
+uint8_t
+rte_event_port_count(uint8_t dev_id);
+
+/**
+ * Start an event device.
+ *
+ * The device start step is the last one and consists of setting the event
+ * queues to start accepting the events and schedules to event ports.
+ *
+ * On success, all basic functions exported by the API (event enqueue,
+ * event dequeue and so on) can be invoked.
+ *
+ * @param dev_id
+ * Event device identifier
+ * @return
+ * - 0: Success, device started.
+ * - <0: Error code of the driver device start function.
+ */
+int
+rte_event_dev_start(uint8_t dev_id);
+
+/**
+ * Stop an event device. The device can be restarted with a call to
+ * rte_event_dev_start()
+ *
+ * @param dev_id
+ * Event device identifier.
+ */
+void
+rte_event_dev_stop(uint8_t dev_id);
+
+/**
+ * Close an event device. The device cannot be restarted!
+ *
+ * @param dev_id
+ * Event device identifier
+ *
+ * @return
+ * - 0 on successfully closing device
+ * - <0 on failure to close device
+ * - (-EAGAIN) if device is busy
+ */
+int
+rte_event_dev_close(uint8_t dev_id);
+
+/* Scheduler type definitions */
+#define RTE_SCHED_TYPE_ORDERED 0
+/**< Ordered scheduling
+ *
+ * Events from an ordered flow of an event queue can be scheduled to multiple
+ * ports for concurrent processing while maintaining the original event order.
+ * This scheme enables the user to achieve high single flow throughput by
+ * avoiding SW synchronization for ordering between ports which bound to cores.
+ *
+ * The source flow ordering from an event queue is maintained when events are
+ * enqueued to their destination queue within the same ordered flow context.
+ * An event port holds the context until application call
+ * rte_event_dequeue_burst() from the same port, which implicitly releases
+ * the context.
+ * User may allow the scheduler to release the context earlier than that
+ * by invoking rte_event_enqueue_burst() with RTE_EVENT_OP_RELEASE operation.
+ *
+ * Events from the source queue appear in their original order when dequeued
+ * from a destination queue.
+ * Event ordering is based on the received event(s), but also other
+ * (newly allocated or stored) events are ordered when enqueued within the same
+ * ordered context. Events not enqueued (e.g. released or stored) within the
+ * context are considered missing from reordering and are skipped at this time
+ * (but can be ordered again within another context).
+ *
+ * @see rte_event_queue_setup(), rte_event_dequeue_burst(), RTE_EVENT_OP_RELEASE
+ */
+
+#define RTE_SCHED_TYPE_ATOMIC 1
+/**< Atomic scheduling
+ *
+ * Events from an atomic flow of an event queue can be scheduled only to a
+ * single port at a time. The port is guaranteed to have exclusive (atomic)
+ * access to the associated flow context, which enables the user to avoid SW
+ * synchronization. Atomic flows also help to maintain event ordering
+ * since only one port at a time can process events from a flow of an
+ * event queue.
+ *
+ * The atomic queue synchronization context is dedicated to the port until
+ * application call rte_event_dequeue_burst() from the same port,
+ * which implicitly releases the context. User may allow the scheduler to
+ * release the context earlier than that by invoking rte_event_enqueue_burst()
+ * with RTE_EVENT_OP_RELEASE operation.
+ *
+ * @see rte_event_queue_setup(), rte_event_dequeue_burst(), RTE_EVENT_OP_RELEASE
+ */
+
+#define RTE_SCHED_TYPE_PARALLEL 2
+/**< Parallel scheduling
+ *
+ * The scheduler performs priority scheduling, load balancing, etc. functions
+ * but does not provide additional event synchronization or ordering.
+ * It is free to schedule events from a single parallel flow of an event queue
+ * to multiple events ports for concurrent processing.
+ * The application is responsible for flow context synchronization and
+ * event ordering (SW synchronization).
+ *
+ * @see rte_event_queue_setup(), rte_event_dequeue_burst()
+ */
+
+/* Event types to classify the event source */
+#define RTE_EVENT_TYPE_ETHDEV 0x0
+/**< The event generated from ethdev subsystem */
+#define RTE_EVENT_TYPE_CRYPTODEV 0x1
+/**< The event generated from crypodev subsystem */
+#define RTE_EVENT_TYPE_TIMERDEV 0x2
+/**< The event generated from timerdev subsystem */
+#define RTE_EVENT_TYPE_CPU 0x3
+/**< The event generated from cpu for pipelining.
+ * Application may use *sub_event_type* to further classify the event
+ */
+#define RTE_EVENT_TYPE_MAX 0x10
+/**< Maximum number of event types */
+
+/* Event enqueue operations */
+#define RTE_EVENT_OP_NEW 0
+/**< The event producers use this operation to inject a new event to the
+ * event device.
+ */
+#define RTE_EVENT_OP_FORWARD 1
+/**< The CPU use this operation to forward the event to different event queue or
+ * change to new application specific flow or schedule type to enable
+ * pipelining
+ */
+#define RTE_EVENT_OP_RELEASE 2
+/**< Release the flow context associated with the schedule type.
+ *
+ * If current flow's scheduler type method is *RTE_SCHED_TYPE_ATOMIC*
+ * then this function hints the scheduler that the user has completed critical
+ * section processing in the current atomic context.
+ * The scheduler is now allowed to schedule events from the same flow from
+ * an event queue to another port. However, the context may be still held
+ * until the next rte_event_dequeue_burst() call, this call allows but does not
+ * force the scheduler to release the context early.
+ *
+ * Early atomic context release may increase parallelism and thus system
+ * performance, but the user needs to design carefully the split into critical
+ * vs non-critical sections.
+ *
+ * If current flow's scheduler type method is *RTE_SCHED_TYPE_ORDERED*
+ * then this function hints the scheduler that the user has done all that need
+ * to maintain event order in the current ordered context.
+ * The scheduler is allowed to release the ordered context of this port and
+ * avoid reordering any following enqueues.
+ *
+ * Early ordered context release may increase parallelism and thus system
+ * performance.
+ *
+ * If current flow's scheduler type method is *RTE_SCHED_TYPE_PARALLEL*
+ * or no scheduling context is held then this function may be an NOOP,
+ * depending on the implementation.
+ *
+ */
+
+/**
+ * The generic *rte_event* structure to hold the event attributes
+ * for dequeue and enqueue operation
+ */
+struct rte_event {
+ /** WORD0 */
+ RTE_STD_C11
+ union {
+ uint64_t event;
+ /** Event attributes for dequeue or enqueue operation */
+ struct {
+ uint32_t flow_id:20;
+ /**< Targeted flow identifier for the enqueue and
+ * dequeue operation.
+ * The value must be in the range of
+ * [0, nb_event_queue_flows - 1] which
+ * previously supplied to rte_event_dev_configure().
+ */
+ uint32_t sub_event_type:8;
+ /**< Sub-event types based on the event source.
+ * @see RTE_EVENT_TYPE_CPU
+ */
+ uint32_t event_type:4;
+ /**< Event type to classify the event source.
+ * @see RTE_EVENT_TYPE_ETHDEV, (RTE_EVENT_TYPE_*)
+ */
+ uint8_t op:2;
+ /**< The type of event enqueue operation - new/forward/
+ * etc.This field is not preserved across an instance
+ * and is undefined on dequeue.
+ * @see RTE_EVENT_OP_NEW, (RTE_EVENT_OP_*)
+ */
+ uint8_t rsvd:4;
+ /**< Reserved for future use */
+ uint8_t sched_type:2;
+ /**< Scheduler synchronization type (RTE_SCHED_TYPE_*)
+ * associated with flow id on a given event queue
+ * for the enqueue and dequeue operation.
+ */
+ uint8_t queue_id;
+ /**< Targeted event queue identifier for the enqueue or
+ * dequeue operation.
+ * The value must be in the range of
+ * [0, nb_event_queues - 1] which previously supplied to
+ * rte_event_dev_configure().
+ */
+ uint8_t priority;
+ /**< Event priority relative to other events in the
+ * event queue. The requested priority should in the
+ * range of [RTE_EVENT_DEV_PRIORITY_HIGHEST,
+ * RTE_EVENT_DEV_PRIORITY_LOWEST].
+ * The implementation shall normalize the requested
+ * priority to supported priority value.
+ * Valid when the device has
+ * RTE_EVENT_DEV_CAP_EVENT_QOS capability.
+ */
+ uint8_t impl_opaque;
+ /**< Implementation specific opaque value.
+ * An implementation may use this field to hold
+ * implementation specific value to share between
+ * dequeue and enqueue operation.
+ * The application should not modify this field.
+ */
+ };
+ };
+ /** WORD1 */
+ RTE_STD_C11
+ union {
+ uint64_t u64;
+ /**< Opaque 64-bit value */
+ void *event_ptr;
+ /**< Opaque event pointer */
+ struct rte_mbuf *mbuf;
+ /**< mbuf pointer if dequeued event is associated with mbuf */
+ };
+};
+
+/**
+ * Schedule one or more events in the event dev.
+ *
+ * An event dev implementation may define this is a NOOP, for instance if
+ * the event dev performs its scheduling in hardware.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ */
+void
+rte_event_schedule(uint8_t dev_id);
+
+/**
+ * Enqueue a burst of events objects or an event object supplied in *rte_event*
+ * structure on an event device designated by its *dev_id* through the event
+ * port specified by *port_id*. Each event object specifies the event queue on
+ * which it will be enqueued.
+ *
+ * The *nb_events* parameter is the number of event objects to enqueue which are
+ * supplied in the *ev* array of *rte_event* structure.
+ *
+ * The rte_event_enqueue_burst() function returns the number of
+ * events objects it actually enqueued. A return value equal to *nb_events*
+ * means that all event objects have been enqueued.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @param port_id
+ * The identifier of the event port.
+ * @param ev
+ * Points to an array of *nb_events* objects of type *rte_event* structure
+ * which contain the event object enqueue operations to be processed.
+ * @param nb_events
+ * The number of event objects to enqueue, typically number of
+ * rte_event_port_enqueue_depth() available for this port.
+ *
+ * @return
+ * The number of event objects actually enqueued on the event device. The
+ * return value can be less than the value of the *nb_events* parameter when
+ * the event devices queue is full or if invalid parameters are specified in a
+ * *rte_event*. If return value is less than *nb_events*, the remaining events
+ * at the end of ev[] are not consumed,and the caller has to take care of them
+ *
+ * @see rte_event_port_enqueue_depth()
+ */
+uint16_t
+rte_event_enqueue_burst(uint8_t dev_id, uint8_t port_id,
+ const struct rte_event ev[], uint16_t nb_events);
+
+/**
+ * Converts nanoseconds to *timeout_ticks* value for rte_event_dequeue_burst()
+ *
+ * If the device is configured with RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT flag
+ * then application can use this function to convert timeout value in
+ * nanoseconds to implementations specific timeout value supplied in
+ * rte_event_dequeue_burst()
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @param ns
+ * Wait time in nanosecond
+ * @param[out] timeout_ticks
+ * Value for the *timeout_ticks* parameter in rte_event_dequeue_burst()
+ *
+ * @return
+ * - 0 on success.
+ * - <0 on failure.
+ *
+ * @see rte_event_dequeue_burst(), RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT
+ * @see rte_event_dev_configure()
+ *
+ */
+int
+rte_event_dequeue_timeout_ticks(uint8_t dev_id, uint64_t ns,
+ uint64_t *timeout_ticks);
+
+/**
+ * Dequeue a burst of events objects or an event object from the event port
+ * designated by its *event_port_id*, on an event device designated
+ * by its *dev_id*.
+ *
+ * rte_event_dequeue_burst() does not dictate the specifics of scheduling
+ * algorithm as each eventdev driver may have different criteria to schedule
+ * an event. However, in general, from an application perspective scheduler may
+ * use the following scheme to dispatch an event to the port.
+ *
+ * 1) Selection of event queue based on
+ * a) The list of event queues are linked to the event port.
+ * b) If the device has RTE_EVENT_DEV_CAP_QUEUE_QOS capability then event
+ * queue selection from list is based on event queue priority relative to
+ * other event queue supplied as *priority* in rte_event_queue_setup()
+ * c) If the device has RTE_EVENT_DEV_CAP_EVENT_QOS capability then event
+ * queue selection from the list is based on event priority supplied as
+ * *priority* in rte_event_enqueue_burst()
+ * 2) Selection of event
+ * a) The number of flows available in selected event queue.
+ * b) Schedule type method associated with the event
+ *
+ * The *nb_events* parameter is the maximum number of event objects to dequeue
+ * which are returned in the *ev* array of *rte_event* structure.
+ *
+ * The rte_event_dequeue_burst() function returns the number of events objects
+ * it actually dequeued. A return value equal to *nb_events* means that all
+ * event objects have been dequeued.
+ *
+ * The number of events dequeued is the number of scheduler contexts held by
+ * this port. These contexts are automatically released in the next
+ * rte_event_dequeue_burst() invocation, or invoking rte_event_enqueue_burst()
+ * with RTE_EVENT_OP_RELEASE operation can be used to release the
+ * contexts early.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @param port_id
+ * The identifier of the event port.
+ * @param[out] ev
+ * Points to an array of *nb_events* objects of type *rte_event* structure
+ * for output to be populated with the dequeued event objects.
+ * @param nb_events
+ * The maximum number of event objects to dequeue, typically number of
+ * rte_event_port_dequeue_depth() available for this port.
+ *
+ * @param timeout_ticks
+ * - 0 no-wait, returns immediately if there is no event.
+ * - >0 wait for the event, if the device is configured with
+ * RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT then this function will wait until
+ * the event available or *timeout_ticks* time.
+ * if the device is not configured with RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT
+ * then this function will wait until the event available or
+ * *dequeue_timeout_ns* ns which was previously supplied to
+ * rte_event_dev_configure()
+ *
+ * @return
+ * The number of event objects actually dequeued from the port. The return
+ * value can be less than the value of the *nb_events* parameter when the
+ * event port's queue is not full.
+ *
+ * @see rte_event_port_dequeue_depth()
+ */
+uint16_t
+rte_event_dequeue_burst(uint8_t dev_id, uint8_t port_id, struct rte_event ev[],
+ uint16_t nb_events, uint64_t timeout_ticks);
+
+/**
+ * Link multiple source event queues supplied in *queues* to the destination
+ * event port designated by its *port_id* with associated service priority
+ * supplied in *priorities* on the event device designated by its *dev_id*.
+ *
+ * The link establishment shall enable the event port *port_id* from
+ * receiving events from the specified event queue(s) supplied in *queues*
+ *
+ * An event queue may link to one or more event ports.
+ * The number of links can be established from an event queue to event port is
+ * implementation defined.
+ *
+ * Event queue(s) to event port link establishment can be changed at runtime
+ * without re-configuring the device to support scaling and to reduce the
+ * latency of critical work by establishing the link with more event ports
+ * at runtime.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ *
+ * @param port_id
+ * Event port identifier to select the destination port to link.
+ *
+ * @param queues
+ * Points to an array of *nb_links* event queues to be linked
+ * to the event port.
+ * NULL value is allowed, in which case this function links all the configured
+ * event queues *nb_event_queues* which previously supplied to
+ * rte_event_dev_configure() to the event port *port_id*
+ *
+ * @param priorities
+ * Points to an array of *nb_links* service priorities associated with each
+ * event queue link to event port.
+ * The priority defines the event port's servicing priority for
+ * event queue, which may be ignored by an implementation.
+ * The requested priority should in the range of
+ * [RTE_EVENT_DEV_PRIORITY_HIGHEST, RTE_EVENT_DEV_PRIORITY_LOWEST].
+ * The implementation shall normalize the requested priority to
+ * implementation supported priority value.
+ * NULL value is allowed, in which case this function links the event queues
+ * with RTE_EVENT_DEV_PRIORITY_NORMAL servicing priority
+ *
+ * @param nb_links
+ * The number of links to establish
+ *
+ * @return
+ * The number of links actually established. The return value can be less than
+ * the value of the *nb_links* parameter when the implementation has the
+ * limitation on specific queue to port link establishment or if invalid
+ * parameters are specified in *queues*
+ * If the return value is less than *nb_links*, the remaining links at the end
+ * of link[] are not established, and the caller has to take care of them.
+ * If return value is less than *nb_links* then implementation shall update the
+ * rte_errno accordingly, Possible rte_errno values are
+ * (-EDQUOT) Quota exceeded(Application tried to link the queue configured with
+ * RTE_EVENT_QUEUE_CFG_SINGLE_LINK to more than one event ports)
+ * (-EINVAL) Invalid parameter
+ *
+ */
+int
+rte_event_port_link(uint8_t dev_id, uint8_t port_id,
+ const uint8_t queues[], const uint8_t priorities[],
+ uint16_t nb_links);
+
+/**
+ * Unlink multiple source event queues supplied in *queues* from the destination
+ * event port designated by its *port_id* on the event device designated
+ * by its *dev_id*.
+ *
+ * The unlink establishment shall disable the event port *port_id* from
+ * receiving events from the specified event queue *queue_id*
+ *
+ * Event queue(s) to event port unlink establishment can be changed at runtime
+ * without re-configuring the device.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ *
+ * @param port_id
+ * Event port identifier to select the destination port to unlink.
+ *
+ * @param queues
+ * Points to an array of *nb_unlinks* event queues to be unlinked
+ * from the event port.
+ * NULL value is allowed, in which case this function unlinks all the
+ * event queue(s) from the event port *port_id*.
+ *
+ * @param nb_unlinks
+ * The number of unlinks to establish
+ *
+ * @return
+ * The number of unlinks actually established. The return value can be less
+ * than the value of the *nb_unlinks* parameter when the implementation has the
+ * limitation on specific queue to port unlink establishment or
+ * if invalid parameters are specified.
+ * If the return value is less than *nb_unlinks*, the remaining queues at the
+ * end of queues[] are not established, and the caller has to take care of them.
+ * If return value is less than *nb_unlinks* then implementation shall update
+ * the rte_errno accordingly, Possible rte_errno values are
+ * (-EINVAL) Invalid parameter
+ *
+ */
+int
+rte_event_port_unlink(uint8_t dev_id, uint8_t port_id,
+ uint8_t queues[], uint16_t nb_unlinks);
+
+/**
+ * Retrieve the list of source event queues and its associated service priority
+ * linked to the destination event port designated by its *port_id*
+ * on the event device designated by its *dev_id*.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ *
+ * @param port_id
+ * Event port identifier.
+ *
+ * @param[out] queues
+ * Points to an array of *queues* for output.
+ * The caller has to allocate *RTE_EVENT_MAX_QUEUES_PER_DEV* bytes to
+ * store the event queue(s) linked with event port *port_id*
+ *
+ * @param[out] priorities
+ * Points to an array of *priorities* for output.
+ * The caller has to allocate *RTE_EVENT_MAX_QUEUES_PER_DEV* bytes to
+ * store the service priority associated with each event queue linked
+ *
+ * @return
+ * The number of links established on the event port designated by its
+ * *port_id*.
+ * - <0 on failure.
+ *
+ */
+int
+rte_event_port_links_get(uint8_t dev_id, uint8_t port_id,
+ uint8_t queues[], uint8_t priorities[]);
+
+/**
+ * Dump internal information about *dev_id* to the FILE* provided in *f*.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ *
+ * @param f
+ * A pointer to a file for output
+ *
+ * @return
+ * - 0: on success
+ * - <0: on failure.
+ */
+int
+rte_event_dev_dump(uint8_t dev_id, FILE *f);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_EVENTDEV_H_ */
--
2.5.5
^ permalink raw reply related
* [PATCH v4 0/6] libeventdev API and northbound implementation
From: Jerin Jacob @ 2016-12-21 9:25 UTC (permalink / raw)
To: dev
Cc: thomas.monjalon, bruce.richardson, hemant.agrawal, gage.eads,
harry.van.haaren, Jerin Jacob
In-Reply-To: <1480996340-29871-1-git-send-email-jerin.jacob@caviumnetworks.com>
As previously discussed in RFC v1 [1], RFC v2 [2], with changes
described in [3] (also pasted below), here is the first non-draft series
for this new API.
[1] http://dpdk.org/ml/archives/dev/2016-August/045181.html
[2] http://dpdk.org/ml/archives/dev/2016-October/048592.html
[3] http://dpdk.org/ml/archives/dev/2016-October/048196.html
v3..v4:
1) Fixed the shared lib build issue(Bruce)
2) Added missing "struct rte_eventdev *dev" in eventdev_queue_release_t(Bruce)
3) In order to shorten the macro name, removed _FLAG_ in it(Bruce)
4) Fixed the wrong 'in-reply-to' while sending the v3 (Shreyansh)
v2..v3:
1) Changed struct rte_event layout more aligment balanced(Harry, Jerin)
2) Changed event_ptr type to void* from uintptr_t(Bruce)
3) Changed ev[] as const in rte_event_enqueue_burst to disallow
drivers from modifying the events passed in(Bruce)
4) Removed queue memory allocation from common code as some drivers may not need
it(Bruce)
5) Removed "struct rte_event_queue_link" and replaced with queues and priorities
in the link and link_get API to avoid one redirection to use the API(Bruce)
v1..v2:
1) Remove unnecessary header files from rte_eventdev.h(Thomas)
2) Removed PMD driver name(EVENTDEV_NAME_SKELETON_PMD) from rte_eventdev.h(Thomas)
3) Removed different #define for different priority schemes. Changed to
one event device RTE_EVENT_DEV_PRIORITY_* priority (Bruce)
4) add const to rte_event_dev_configure(), rte_event_queue_setup(),
rte_event_port_setup(), rte_event_port_link()(Bruce)
5) Fixed missing dev argument in dev->schedule() function(Bruce)
6) Changed \see to @see in doxgen comments(Thomas)
7) Added additional text in specification to clarify the queue depth(Thomas)
8) Changed wait to timeout across the specification(Thomas)
9) Added longer explanation for RTE_EVENT_OP_NEW and RTE_EVENT_OP_FORWARD(Thomas)
10) Fixed issue with RTE_EVENT_OP_RELEASE doxgen formatting(Thomas)
11) Changed to RTE_EVENT_DEV_CFG_FLAG_ from RTE_EVENT_DEV_CFG_(Thomas)
12) Changed to EVENT_QUEUE_CFG_FLAG_ from EVENT_QUEUE_CFG_(Thomas)
13) s/RTE_EVENT_TYPE_CORE/RTE_EVENT_TYPE_CPU/(Thomas, Gage)
14) Removed non burst API and kept only the burst API in the API specification
(Thomas, Bruce, Harry, Jerin)
-- Driver interface has non burst API, selection of the non burst API is based
on num_objects == 1
15) sizeeof(struct rte_event) was not 16 in v1. Fixed it in v2
-- reduced the width of event_type to 4bit to save space for future change
-- introduced impl_opaque for implementation specific opaque data(Harry),
Something useful for HW driver too, in the context of removal the need for sepeare
release API.
-- squashed other element size and provided enough space to impl_opaque(Jerin)
-- added RTE_BUILD_BUG_ON(sizeof(struct rte_event) != 16); check
16) add union of uint64_t in the second element in struct rte_event to
make sure the structure has 16byte address all arch(Thomas)
17) Fixed invalid check of nb_atomic_order_sequences in implementation(Gage)
18) s/EDEV_LOG_ERR/RTE_EDEV_LOG_ERR(Thomas)
19) s/rte_eventdev_pmd_/rte_event_pmd_/(Bruce)
20) added fine details of distributed vs centralized scheduling information
in the specification and introduced RTE_EVENT_DEV_CAP_FLAG_DISTRIBUTED_SCHED
flag(Gage)
21)s/RTE_EVENT_QUEUE_CFG_FLAG_SINGLE_CONSUMER/RTE_EVENT_QUEUE_CFG_FLAG_SINGLE_LINK (Jerin)
to remove the confusion to between another producer and consumer in sw eventdev driver
22) Northbound api implementation patch spited to more logical patches(Thomas)
Changes since RFC v2:
- Updated the documentation to define the need for this library[Jerin]
- Added RTE_EVENT_QUEUE_CFG_*_ONLY configuration parameters in
struct rte_event_queue_conf to enable optimized sw implementation [Bruce]
- Introduced RTE_EVENT_OP* ops [Bruce]
- Added nb_event_queue_flows,nb_event_port_dequeue_depth, nb_event_port_enqueue_depth
in rte_event_dev_configure() like ethdev and crypto library[Jerin]
- Removed rte_event_release() and replaced with RTE_EVENT_OP_RELEASE ops to
reduce fast path APIs and it is redundant too[Jerin]
- In the view of better application portability, Removed pin_event
from rte_event_enqueue as it is just hint and Intel/NXP can not support it[Jerin]
- Added rte_event_port_links_get()[Jerin]
- Added rte_event_dev_dump[Harry]
Notes:
- This patch set is check-patch clean with an exception that
03/06 has one WARNING:MACRO_WITH_FLOW_CONTROL
- Looking forward to getting additional maintainers for libeventdev
TODO:
1) Create user guide
Jerin Jacob (6):
eventdev: introduce event driven programming model
eventdev: define southbound driver interface
eventdev: implement the northbound APIs
eventdev: implement PMD registration functions
event/skeleton: add skeleton eventdev driver
app/test: unit test case for eventdev APIs
MAINTAINERS | 5 +
app/test/Makefile | 2 +
app/test/test_eventdev.c | 778 +++++++++++
config/common_base | 14 +
doc/api/doxy-api-index.md | 1 +
doc/api/doxy-api.conf | 1 +
drivers/Makefile | 1 +
drivers/event/Makefile | 36 +
drivers/event/skeleton/Makefile | 55 +
.../skeleton/rte_pmd_skeleton_event_version.map | 4 +
drivers/event/skeleton/skeleton_eventdev.c | 519 ++++++++
drivers/event/skeleton/skeleton_eventdev.h | 68 +
lib/Makefile | 1 +
lib/librte_eal/common/include/rte_log.h | 1 +
lib/librte_eventdev/Makefile | 57 +
lib/librte_eventdev/rte_eventdev.c | 1222 +++++++++++++++++
lib/librte_eventdev/rte_eventdev.h | 1407 ++++++++++++++++++++
lib/librte_eventdev/rte_eventdev_pmd.h | 514 +++++++
lib/librte_eventdev/rte_eventdev_version.map | 39 +
mk/rte.app.mk | 5 +
20 files changed, 4730 insertions(+)
create mode 100644 app/test/test_eventdev.c
create mode 100644 drivers/event/Makefile
create mode 100644 drivers/event/skeleton/Makefile
create mode 100644 drivers/event/skeleton/rte_pmd_skeleton_event_version.map
create mode 100644 drivers/event/skeleton/skeleton_eventdev.c
create mode 100644 drivers/event/skeleton/skeleton_eventdev.h
create mode 100644 lib/librte_eventdev/Makefile
create mode 100644 lib/librte_eventdev/rte_eventdev.c
create mode 100644 lib/librte_eventdev/rte_eventdev.h
create mode 100644 lib/librte_eventdev/rte_eventdev_pmd.h
create mode 100644 lib/librte_eventdev/rte_eventdev_version.map
--
2.5.5
^ permalink raw reply
* Re: [PATCH v3] drivers: advertise kmod dependencies in pmdinfo
From: Andrew Rybchenko @ 2016-12-21 9:21 UTC (permalink / raw)
To: Thomas Monjalon, Olivier Matz
Cc: Adrien Mazarguil, dev, nhorman, vido, fiona.trahe, stephen
In-Reply-To: <2489002.JyIsi2jNCp@xps13>
On 12/20/2016 08:26 PM, Thomas Monjalon wrote:
>>> Add a new macro RTE_PMD_REGISTER_KMOD_DEP() that allows a driver to
>>> declare the list of kernel modules required to run properly.
>>>
>>> Today, most PCI drivers require uio/vfio.
>>>
>>> Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
>>> Acked-by: Fiona Trahe <fiona.trahe@intel.com>
>> Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
> Applied in main tree, thanks
Is there any plan on how it will be done/solved for a new drivers in
dpdk-next-net?
Should I care about it for sfc?
Andrew.
^ permalink raw reply
* [PATCH] app/testpmd: refine xstats show
From: Jianfeng Tan @ 2016-12-21 9:09 UTC (permalink / raw)
To: dev; +Cc: jingjing.wu, Jianfeng Tan
When using "show port xstats all" command to show xstats, the output
is usually too long to obtain what you really want, expecially when
multi-queue is enabled.
This patch refines this situation by skipping showing those with value
of zero.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
---
app/test-pmd/config.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 36c47ab..1adef29 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -304,10 +304,13 @@ nic_xstats_display(portid_t port_id)
}
/* Display xstats */
- for (idx_xstat = 0; idx_xstat < cnt_xstats; idx_xstat++)
+ for (idx_xstat = 0; idx_xstat < cnt_xstats; idx_xstat++) {
+ if ((xstats[idx_xstat].value) == 0)
+ continue;
printf("%s: %"PRIu64"\n",
xstats_names[idx_xstat].name,
xstats[idx_xstat].value);
+ }
free(xstats_names);
free(xstats);
}
--
2.7.4
^ permalink raw reply related
* [PATCH] net/i40e: fix wrong return value when handling PF message
From: Wenzhuo Lu @ 2016-12-21 8:29 UTC (permalink / raw)
To: dev; +Cc: Wenzhuo Lu
When VF receives a message from PF, it should check the return
value. But in i40evf_execute_vf_cmd the value is ignored and not
returned to the caller.
Fixes: 95cd21f45d1b ("i40evf: allocate virtchnl commands buffer per VF")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
---
drivers/net/i40e/i40e_ethdev.h | 2 +-
drivers/net/i40e/i40e_ethdev_vf.c | 1 +
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h
index 298cef4..28111a7 100644
--- a/drivers/net/i40e/i40e_ethdev.h
+++ b/drivers/net/i40e/i40e_ethdev.h
@@ -527,7 +527,7 @@ struct i40e_vf {
enum i40e_aq_link_speed link_speed;
bool vf_reset;
volatile uint32_t pend_cmd; /* pending command not finished yet */
- uint32_t cmd_retval; /* return value of the cmd response from PF */
+ int32_t cmd_retval; /* return value of the cmd response from PF */
u16 pend_msg; /* flags indicates events from pf not handled yet */
uint8_t *aq_resp; /* buffer to store the adminq response from PF */
diff --git a/drivers/net/i40e/i40e_ethdev_vf.c b/drivers/net/i40e/i40e_ethdev_vf.c
index 12da0ec..5d25764 100644
--- a/drivers/net/i40e/i40e_ethdev_vf.c
+++ b/drivers/net/i40e/i40e_ethdev_vf.c
@@ -361,6 +361,7 @@ struct rte_i40evf_xstats_name_off {
err = -1;
do {
ret = i40evf_read_pfmsg(dev, &info);
+ vf->cmd_retval = info.result;
if (ret == I40EVF_MSG_CMD) {
err = 0;
break;
--
1.9.3
^ permalink raw reply related
* Re: [PATCH v3 02/12] eal/bus: introduce bus abstraction
From: Shreyansh Jain @ 2016-12-21 7:11 UTC (permalink / raw)
To: Stephen Hemminger
Cc: Jan Blunck, dev, David Marchand, Thomas Monjalon, Ferruh Yigit,
jianbo.liu
In-Reply-To: <20161220091156.4442cb07@xeon-e3>
On Tuesday 20 December 2016 10:41 PM, Stephen Hemminger wrote:
> On Tue, 20 Dec 2016 14:17:14 +0100
> Jan Blunck <jblunck@infradead.org> wrote:
>
>> On Fri, Dec 16, 2016 at 2:10 PM, Shreyansh Jain <shreyansh.jain@nxp.com> wrote:
>>> This patch introduces the rte_bus abstraction for devices and drivers in
>>> EAL framework. The model is:
>>> - One or more buses are connected to a CPU (or core)
>>> - One or more devices are conneted to a Bus
>>> - Drivers are running instances which manage one or more devices
>>> - Bus is responsible for identifying devices (and interrupt propogation)
>>> - Driver is responsible for initializing the device
>>>
>>> This patch adds a 'rte_bus' class which rte_driver and rte_device refer.
>>> This way, each device (rte_xxx_device) would have reference to the bus
>>> it is based on. As well as, each driver (rte_xxx_driver) would have link
>>> to the bus and devices on it for servicing.
>>>
>>> __ rte_bus_list
>>> /
>>> +----------'---+
>>> |rte_bus |
>>> | driver_list------> List of rte_bus specific
>>> | device_list---- devices
>>> | | `-> List of rte_bus associated
>>> | | drivers
>>> +--|------|----+
>>> _________/ \_________
>>> +--------/----+ +-\---------------+
>>> |rte_device | |rte_driver |
>>> | rte_bus | | rte_bus |
>>> | rte_driver | | ... |
>>> | ... | +---------...-----+
>>> | | |||
>>> +---||--------+ |||
>>> || |||
>>> | \ \\\
>>> | \_____________ \\\
>>> | \ |||
>>> +------|---------+ +----|----------+ |||
>>> |rte_pci_device | |rte_xxx_device | |||
>>> | .... | | .... | |||
>>> +----------------+ +---------------+ / | \
>>> / | \
>>> _____________________/ / \
>>> / ___/ \
>>> +-------------'--+ +------------'---+ +--'------------+
>>> |rte_pci_driver | |rte_vdev_driver | |rte_xxx_driver |
>>> | .... | | .... | | .... |
>>> +----------------+ +----------------+ +---------------+
>>>
>>> This patch only enables the bus references on rte_driver and rte_driver.
>>> EAL wide global device and driver list continue to exist until an instance
>>> of bus is added in subsequent patches.
>>>
>>> This patch also introduces RTE_REGISTER_BUS macro on the lines of
>>> RTE_PMD_REGISTER_XXX. Key difference is that the constructor priority has
>>> been explicitly set to 101 so as to execute bus registration before PMD.
>>>
>>> Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
>>>
>
> Ok, but let's keep this as bus type not bus. It gets really hard and complex
> to enumerate all layers of PCI bus and bridges.
>
Sorry, I couldn't understand your comment. You mean it should be
rte_bus_type rather than rte_bus? Or, you mean rather than creating a
rte_bus, we should rather have a type embedded in rte_device/driver?
(Though this is 'to' Jan, the context is hinting at my mail)
^ permalink raw reply
* [PATCH v6 25/25] net/i40e: set/clear VF stats from PF
From: Wenzhuo Lu @ 2016-12-21 6:34 UTC (permalink / raw)
To: dev; +Cc: Qi Zhang
In-Reply-To: <1482302070-128496-1-git-send-email-wenzhuo.lu@intel.com>
This patch add support to get/clear VF statistics
from PF side.
Two APIs are added:
rte_pmd_i40e_get_vf_stats.
rte_pmd_i40e_reset_vf_stats.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
---
drivers/net/i40e/i40e_ethdev.c | 81 +++++++++++++++++++++++++++++++
drivers/net/i40e/rte_pmd_i40e.h | 41 ++++++++++++++++
drivers/net/i40e/rte_pmd_i40e_version.map | 2 +
3 files changed, 124 insertions(+)
diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 1a33964..3f386bc 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -10477,3 +10477,84 @@ int rte_pmd_i40e_set_vf_vlan_filter(uint8_t port, uint16_t vlan_id,
return ret;
}
+
+int
+rte_pmd_i40e_get_vf_stats(uint8_t port,
+ uint16_t vf_id,
+ struct rte_eth_stats *stats)
+{
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev_info dev_info;
+ struct i40e_pf *pf;
+ struct i40e_vsi *vsi;
+ int ret = 0;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+
+ if (vf_id >= dev_info.max_vfs)
+ return -EINVAL;
+
+ pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+
+ if (vf_id > pf->vf_num - 1 || !pf->vfs) {
+ PMD_DRV_LOG(ERR, "Invalid argument.");
+ return -EINVAL;
+ }
+
+ vsi = pf->vfs[vf_id].vsi;
+ if (!vsi)
+ return -EINVAL;
+
+ i40e_update_vsi_stats(vsi);
+
+ stats->ipackets = vsi->eth_stats.rx_unicast +
+ vsi->eth_stats.rx_multicast +
+ vsi->eth_stats.rx_broadcast;
+ stats->opackets = vsi->eth_stats.tx_unicast +
+ vsi->eth_stats.tx_multicast +
+ vsi->eth_stats.tx_broadcast;
+ stats->ibytes = vsi->eth_stats.rx_bytes;
+ stats->obytes = vsi->eth_stats.tx_bytes;
+ stats->ierrors = vsi->eth_stats.rx_discards;
+ stats->oerrors = vsi->eth_stats.tx_errors + vsi->eth_stats.tx_discards;
+
+ return ret;
+}
+
+int
+rte_pmd_i40e_reset_vf_stats(uint8_t port,
+ uint16_t vf_id)
+{
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev_info dev_info;
+ struct i40e_pf *pf;
+ struct i40e_vsi *vsi;
+ int ret = 0;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+
+ if (vf_id >= dev_info.max_vfs)
+ return -EINVAL;
+
+ pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+
+ if (vf_id > pf->vf_num - 1 || !pf->vfs) {
+ PMD_DRV_LOG(ERR, "Invalid argument.");
+ return -EINVAL;
+ }
+
+ vsi = pf->vfs[vf_id].vsi;
+ if (!vsi)
+ return -EINVAL;
+
+ vsi->offset_loaded = false;
+ i40e_update_vsi_stats(vsi);
+
+ return ret;
+}
diff --git a/drivers/net/i40e/rte_pmd_i40e.h b/drivers/net/i40e/rte_pmd_i40e.h
index b71bba6..f17e35e 100644
--- a/drivers/net/i40e/rte_pmd_i40e.h
+++ b/drivers/net/i40e/rte_pmd_i40e.h
@@ -284,4 +284,45 @@ int rte_pmd_i40e_set_vf_broadcast(uint8_t port, uint16_t vf_id,
int rte_pmd_i40e_set_vf_vlan_filter(uint8_t port, uint16_t vlan_id,
uint64_t vf_mask, uint8_t on);
+/**
+ * Get VF's statistics
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * VF on which to get.
+ * @param stats
+ * A pointer to a structure of type *rte_eth_stats* to be filled with
+ * the values of device counters for the following set of statistics:
+ * - *ipackets* with the total of successfully received packets.
+ * - *opackets* with the total of successfully transmitted packets.
+ * - *ibytes* with the total of successfully received bytes.
+ * - *obytes* with the total of successfully transmitted bytes.
+ * - *ierrors* with the total of erroneous received packets.
+ * - *oerrors* with the total of failed transmitted packets.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+
+int rte_pmd_i40e_get_vf_stats(uint8_t port,
+ uint16_t vf_id,
+ struct rte_eth_stats *stats);
+
+/**
+ * Clear VF's statistics
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * VF on which to get.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_i40e_reset_vf_stats(uint8_t port,
+ uint16_t vf_id);
+
#endif /* _PMD_I40E_H_ */
diff --git a/drivers/net/i40e/rte_pmd_i40e_version.map b/drivers/net/i40e/rte_pmd_i40e_version.map
index 8ac1bc8..7a5d211 100644
--- a/drivers/net/i40e/rte_pmd_i40e_version.map
+++ b/drivers/net/i40e/rte_pmd_i40e_version.map
@@ -6,7 +6,9 @@ DPDK_2.0 {
DPDK_17.02 {
global:
+ rte_pmd_i40e_get_vf_stats;
rte_pmd_i40e_ping_vfs;
+ rte_pmd_i40e_reset_vf_stats;
rte_pmd_i40e_set_tx_loopback;
rte_pmd_i40e_set_vf_broadcast;
rte_pmd_i40e_set_vf_mac_addr;
--
1.9.3
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox