Distributed Replicated Block Device (DRBD) development
 help / color / mirror / Atom feed
From: Philipp Reisner <philipp.reisner@linbit.com>
To: linux-kernel@vger.kernel.org, Jens Axboe <axboe@kernel.dk>
Cc: drbd-dev@lists.linbit.com
Subject: [Drbd-dev] [PATCH 4/7] drbd: fix resync throttling initialization
Date: Mon, 10 Nov 2014 17:21:12 +0100	[thread overview]
Message-ID: <1415636475-7883-5-git-send-email-philipp.reisner@linbit.com> (raw)
In-Reply-To: <1415636475-7883-1-git-send-email-philipp.reisner@linbit.com>

From: Lars Ellenberg <lars.ellenberg@linbit.com>

If for some reason DRBD resync was the only activity on a backend
device, drbd_rs_c_min_rate_throttle() would mistakenly decide that it is
still initialization time, and keep throttling the resync.

This patch explicitly initializes ->rs_last_events to the current
backend event counters, and drops the rs_last_events == 0 from the
throttle condition.

Reported-by: Mikhail Sugakov <msugakov@amazon.de>

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
---
 drivers/block/drbd/drbd_receiver.c | 2 +-
 drivers/block/drbd/drbd_state.c    | 1 -
 drivers/block/drbd/drbd_worker.c   | 5 ++++-
 3 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index 6960fb0..d169b4a 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -2482,7 +2482,7 @@ bool drbd_rs_c_min_rate_throttle(struct drbd_device *device)
 			atomic_read(&device->rs_sect_ev);
 
 	if (atomic_read(&device->ap_actlog_cnt)
-	    || !device->rs_last_events || curr_events - device->rs_last_events > 64) {
+	    || curr_events - device->rs_last_events > 64) {
 		unsigned long rs_left;
 		int i;
 
diff --git a/drivers/block/drbd/drbd_state.c b/drivers/block/drbd/drbd_state.c
index 4529d92..2d7dd26 100644
--- a/drivers/block/drbd/drbd_state.c
+++ b/drivers/block/drbd/drbd_state.c
@@ -1099,7 +1099,6 @@ __drbd_set_state(struct drbd_device *device, union drbd_state ns,
 
 		set_ov_position(device, ns.conn);
 		device->rs_start = now;
-		device->rs_last_events = 0;
 		device->rs_last_sect_ev = 0;
 		device->ov_last_oos_size = 0;
 		device->ov_last_oos_start = 0;
diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c
index d2d1f97..d0fae55 100644
--- a/drivers/block/drbd/drbd_worker.c
+++ b/drivers/block/drbd/drbd_worker.c
@@ -1592,11 +1592,15 @@ void drbd_resync_after_changed(struct drbd_device *device)
 
 void drbd_rs_controller_reset(struct drbd_device *device)
 {
+	struct gendisk *disk = device->ldev->backing_bdev->bd_contains->bd_disk;
 	struct fifo_buffer *plan;
 
 	atomic_set(&device->rs_sect_in, 0);
 	atomic_set(&device->rs_sect_ev, 0);
 	device->rs_in_flight = 0;
+	device->rs_last_events =
+		(int)part_stat_read(&disk->part0, sectors[0]) +
+		(int)part_stat_read(&disk->part0, sectors[1]);
 
 	/* Updating the RCU protected object in place is necessary since
 	   this function gets called from atomic context.
@@ -1743,7 +1747,6 @@ void drbd_start_resync(struct drbd_device *device, enum drbd_conns side)
 		device->rs_failed    = 0;
 		device->rs_paused    = 0;
 		device->rs_same_csum = 0;
-		device->rs_last_events = 0;
 		device->rs_last_sect_ev = 0;
 		device->rs_total     = tw;
 		device->rs_start     = now;
-- 
1.9.1


  parent reply	other threads:[~2014-11-10 16:21 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-10 16:21 [Drbd-dev] [PATCH 0/7] DRBD updates for the 3.19 merge window Philipp Reisner
2014-11-10 16:21 ` [Drbd-dev] [PATCH 1/7] drbd: Minor cleanups Philipp Reisner
2014-11-10 16:21 ` [Drbd-dev] [PATCH 2/7] drbd: Only use drbd_msg_put_info() in drbd_nl.c Philipp Reisner
2014-11-10 16:21 ` [Drbd-dev] [PATCH 3/7] drbd: fix race between role change and handshake Philipp Reisner
2014-11-10 16:21 ` Philipp Reisner [this message]
2014-11-10 16:21 ` [Drbd-dev] [PATCH 5/7] drbd: merge_bvec_fn: properly remap bvm->bi_bdev Philipp Reisner
2014-11-10 16:21 ` [Drbd-dev] [PATCH 6/7] drbd: Fix state change in case of connection timeout Philipp Reisner
2014-11-10 16:21 ` [Drbd-dev] [PATCH 7/7] drbd: Remove an useless copy of kernel_setsockopt() Philipp Reisner
2014-11-10 16:38 ` [Drbd-dev] [PATCH 0/7] DRBD updates for the 3.19 merge window Jens Axboe
  -- strict thread matches above, loose matches on Subject: below --
2014-10-29 16:37 [Drbd-dev] [PATCH 0/7] RFC DRBD updates for 3.19 Philipp Reisner
2014-10-29 16:37 ` [Drbd-dev] [PATCH 4/7] drbd: fix resync throttling initialization Philipp Reisner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1415636475-7883-5-git-send-email-philipp.reisner@linbit.com \
    --to=philipp.reisner@linbit.com \
    --cc=axboe@kernel.dk \
    --cc=drbd-dev@lists.linbit.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox